FPD 100 Ea4

Pump Product Catalog
Experience In Motion
Pump Supplier to the World

Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the depth or breadth of expertise in the successful application of pre-engineered, engineered, and special purpose pumps and systems.
Product Brands of Distinction

ACEC Centrifugal Pumps Aldrich Pumps Byron Jackson Pumps Calder Energy Recovery Devices Cameron Pumps Durco Process Pumps Flowserve Pumps IDP Pumps Lawrence Pumps Niigata Worthington Pumps Pacific Pumps Pleuger Pumps Scienco Pumps Sier-Bath Rotary Pumps TKL Pumps United Centrifugal Pumps Western Land Roller Irrigation Pumps Wilson-Snyder Pumps Worthington Pumps Worthington Simpson Pumps
flowserve.com
Pump Designs
Flowserve offers a wide range of complementary pump types, built to recognized global standards and customer specification. These include: Single-stage process Between bearings single-stage Between bearings multistage Vertical Submersible motor Positive displacement Nuclear Specialty
Committed to the Complete Pump System Life Cycle

For more than two centuries, Flowserve has served industries requiring solutions that add value and reduce costs throughout the life cycle of a pumping system. Oil and gas Chemical Power generation Water General industry Flowserve partners with customers to respond to the dynamic business conditions that affect them and to improve efficiency, maximize throughput and control process quality. Whether customer needs involve on-site technical assistance, equipment upgrades or broader project planning with full turnkey responsibility, Flowserve delivers professional, reliable results.
Available Configurations
Sealed and sealless Axially and radially split Volute and diffuser Close coupled and spacer coupled Single and double case
A Guide to Flowserve Pumps

The purpose of this publication is to provide a brief summary of the hundreds of pumps that comprise the Flowserve product line. Pump models are divided into five sections, beginning with overhung pumps and continuing through specialty designs. Each pump is identified by its formal designation and accompanied by a fullcolor cutaway illustration. Applicable engineering standards are listed along with performance characteristics and key features. The symbols shown at right are used to identify each pumps primary market applications.
For more information about Flowserve pumps, visit: www.flowserve.com Oil and Gas
Chemical
Power
Water Resources
Mining
Pulp and Paper
Primary Metals
General Industry
flowserve.com
Table of Contents
Pump Selection Guide ......................................... 6 7
Positive Displacement
Product List ............................................................51 Gear ........................................................................52 Screw ......................................................................53 Reciprocating ..........................................................54
Overhung Pumps
Product List ..............................................................9 Chemical Process ............................................10 15 API Process .....................................................16 18 Slurry and Solids Handling .............................. 19 22 Industrial Process ............................................ 23 25
Specialty Products
Product List ............................................................57 Nuclear Pumps and Seals ................................58 61 Extreme Temperature Pumps.................................. 62 Others .............................................................. 63 65
Between Bearings Pumps

Product List ............................................................27 Single Case Axially Split Single-Stage .......28 29 Single Case Axially Split Multistage .................30 Single Case Radially Split Single-Stage ............31 Single Case Radially Split Multistage ........32 34 Double Case ..................................................... 35 37
Additional Information
Introduction ............................................................67 Integrated Solutions Group .............................. 68 69 Other Flowserve Products.......................................70 Reference Sources ..................................................71
Vertical Pumps
Product List ............................................................39 Wet-Pit .............................................................40 41 Double Case .....................................................42 43 Submersible ............................................................ 44 Slurry and Solids Handling ..............................45 47 Sump ...............................................................48 49
Index
Product List ..................................................... 72 73
Pump Selection Guide
Oil and Gas Downstream Upstream and Pipeline Chemical Processing
Power Generation (Fossil, Renewables, Nuclear)
Residuum and Heavy Oil Upgrading
Gas Treating and Sulfur Recovery
Crude, Product and CO2 Pipeline
Heavy Oil, Oil Sands and Shale
Off-sites and Waste Treatment
Volatile Organic Compounds
Water Supply and Treatment
Renewable Fuel Production
Water and CO2 Injection
Drilling and Production
Pump Category Overhung
Sub-Category Chemical Process ANSI, ISO API Process Slurry and Solids Handling Industrial Process
X X X X X X X X
X X
X X X
X X X
X X
FPSO
X X X
X X
X X X
X X X
X X
X X
X X
X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X
X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X
X X X
Between Bearings
Single Case Axially Split Single Case Radially Split Double Case
X X X X X X X X X X
X X X X
X X X X X
X X X
X X
X X
Vertical
Wet-Pit Double Case Deep Well Submersible Motor Slurry and Solids Handling Sump X
X X
X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X
X X X X X X X X X X X X X X X X X X X
X X X
Gear Screw Multiphase Reciprocating
Specialty Products
Nuclear Pumps Nuclear Seals Cryogenic Pumps Cryogenic Liquid Expander Geothermal Deepwell Submersible Pump Hydraulic Decoking Systems Energy Recovery Hydroturbine Energy Recovery DWEER Thruster CVP Concrete Volute Pumps Barge Pump Molten Salt VTP Pump X X X X X X X X X X
Flue Gas Desulfurization
Caustic and Chlor-Alkali
Condensate Extraction
Boiler Feed Booster
Waste Processing
Slurry Processing
Catalytic Cracking
Pharmaceuticals
Hydrocracking
Gas to Liquids
Cooling Water
Hydrotreating
NGL and LPG
Acid Transfer
Boiler Feed
Distillation
Polymers
Auxiliary
Solvents
LNG
X X X Heat Transfer Fluids Molten Salt Transfer Transformer Cooling X X X X X X X Auxiliary Services Nuclear Service Desalination Flood Control X Groundwater Development and Irrigation X X Sewage Collection and Treatment Water Supply and Distribution Water Treatment Cooling Water Descaling X Hydraulic Press X Plating, Galvanizing and Other Coatings X X Scale Recycle X X X Dewatering and Water Supply X X X Leaching Acid X Primary Processing X X Slurry Transfer X X Bleach Chemical X X X X Boiler Feed X X X X Chemical and Liquor X X Coatings X X Digester X Paper Stock X X Shower Pumps X X X X X X X X Automotive X X X X X X X X X X X Agriculture X X X X X X X X X X X Construction X X Industrial Gases X X X X X X X X X X X X Electronics X X X X X X Fire Protection X X X X X X X X X X X Food Processing X X X X X X X X HVAC X X X X X X X X X X X OEM X X Shipping X X X X X X X Snowmaking X X X X X X
Geothermal Well Services
Power Generation (Fossil, Renewables, Nuclear)
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
Water Resources
Primary Metals Mining Pulp and Paper General Industry
flowserve.com
Overhung Pumps flowserve.com

10 10 10 11 11 11 12 12 Mark 3 ISO Recessed Impeller 12 Mark 3 ISO Close Coupled 13 CPXV Chemical Sump 13 CPXS Magnetic Drive 13 PolyChemTM GRP 14 PolyChem VGRP 14 PolyChem S-Series 14 PolyChem M-Series 15 Polyshield 15 Polybase 15 API Process HPX HPXM PHL ERPN PVXM HWMA PVML MSP DSVP Slurry and Solids Handling M R Titan Slurry LC MND MNR FRBH FRBHJC MPT MF MN MSX Industrial Process D800 MEN MENBLOC ME DS SMP SMX F-Line MVE 16 16 16 17 17 17 18 18 18 19 19 19 20 20 20 21 21 21 22 22 22 23 23 23 24 24 24 25 25 25 Chemical Process Mark 3 ASME Standard Mark 3 Lo-Flo Mark 3 Unitized Self-Primer Mark 3 Recessed Impeller Mark 3 In-Line Guardian Magnetic Drive Mark 3 ISO Standard Mark 3 ISO Self-Priming
Overhung Pumps
9
Mark 3 ASME Standard
Mark 3 Lo-Flo
Mark 3 Unitized Self-Primer
Overhung Chemical Process

10
Standards ASME (ANSI) B73.1 Operating Parameters Flows to 4540 m3/h (20 000 gpm) Heads to 215 m (700 ft) Pressures to 27 bar (400 psi) Temperatures from -73C (-100F) to 370C (700F) Features Exclusive reverse vane impeller Standard Mark 3A power end External micrometer impeller adjustment Double row angular contact outboard bearings and single row, deep groove inboard bearings Double lip oil seals Constant level oiler Large, reflective sight glass Choice of lubrication systems Optional ANSI 3A power end with lifetime warranty Certified clean room assembly Inpro/Seal VBXX isolators Magnetic drain plug SealSentry seal chambers Largest shaft and bearing components in ANSI standard pumps Optional inducer Related Configurations Mark 3 Lo-Flo Mark 3 Unitized Self-Primer Mark 3 Recessed Impeller Mark 3 Sealmatic dynamically sealed See Bulletin PS-10-13.
Standards ASME (ANSI) B73.1 Operating Parameters Flows to 50 m3/h (220 gpm) Heads to 300 m (985 ft) Pressures to 31 bar (450 psi) Temperatures from -73C (-100F) to 370C (700F) Features Circular, concentric casing Radial vane impeller Standard Mark 3A power end External micrometer impeller adjustment Double row angular contact outboard bearings and single row, deep groove inboard bearings Double lip oil seals Constant level oiler Large, reflective sight glass Choice of lubrication systems Optional ANSI 3A power end with lifetime warranty Certified clean room assembly Inpro/Seal VBXX isolators Magnetic drain plug SealSentry seal chambers Oversized shaft and bearing components Related Configurations Mark 3 ASME Standard Mark 3 Recessed Impeller See Bulletin PS-10-13.
Inpro/Seal is a registered trademark of Inpro/Seal Company.
Standards Flowserve Operating Parameters Flows to 320 m3/h (1400 gpm) Heads to 120 m (400 ft) Pressures to 20 bar (285 psi) Temperatures to 370C (700F) Static suction lift to 6 m (20 ft) Features Unitized casing with large priming chamber, air separator and volute Exclusive reverse vane impeller standard; open impeller optional Standard Mark 3A power end External micrometer impeller adjustment Double row angular contact outboard bearings and single row, deep groove inboard bearings Double lip oil seals Constant level oiler Large, reflective sight glass Choice of lubrication systems Optional ANSI 3A power end with lifetime warranty Certified clean room assembly Inpro/Seal VBXX isolators Magnetic drain plug SealSentry seal chambers Oversized shaft and bearing components Related Configurations Mark 3 ASME Standard See Bulletin PS-10-13.
Mark 3 Recessed Impeller
Mark 3 In-Line
Guardian Magnetic Drive
Standards Flowserve Operating Parameters Flows to 455 m3/h (2000 gpm) Heads to 120 m (400 ft) Pressures to 20 bar (285 psi) Temperatures from -73C (-100F) to 370C (700F) Features Low shear vortex pumping action Fractional media contact with the impeller Standard CD4MCuN impeller Thick-wall wet end components suitable for light slurries Standard Mark 3A power end External micrometer impeller adjustment Double row angular contact outboard bearings and single row, deep groove inboard bearings Double lip oil seals Constant level oiler Large, reflective sight glass Optional ANSI 3A power end with lifetime warranty Certified clean room assembly Inpro/Seal VBXX isolators Magnetic drain plug SealSentry seal chambers Oversized shaft and bearing Related Configurations Mark 3 ASME Standard Mark 3 Sealmatic, recessed impeller See Bulletin PS-10-13.
Standards ASME (ANSI) B73.2 Operating Parameters Flows to 370 m3/h (1630 gpm) Heads to 230 m (755 ft) Pressures to 24 bar (350 psi) Temperatures from -73C (-100F) to 370C (700F) Features Exclusive reverse vane impeller Standard Mark 3A power end External micrometer impeller adjustment Double row angular contact outboard bearings and single row, deep groove inboard bearings Double lip oil seals Optional ANSI 3A power end with lifetime warranty Certified clean room assembly Inpro/Seal VBXX isolators SealSentry seal chambers Unique C-plus motor and pump shaft alignment system Choice of bearing lubrication Regreasable bearings Oil mist Permanently lubricated bearings Related Configurations Mark 3 In-Line, recessed impeller See Bulletin PS-10-15.
Standards ASME (ANSI) B73.1 dimensions Operating Parameters Flows to 375 m3/h (1650 gpm) Heads to 215 m (700 ft) Pressures to 24 bar (350 psi) Temperatures from -73C (-100F) to 290C (550F) Features Magnetic drive design Alloy C-276 containment shell Rare earth magnets Low NPSHR, reverse vane impeller Casings and impellers interchangeable with sealed configuration Optimized internal lubrication path Silicon carbide bushings and journals with double spiral grooves Standard and contained back pullout Options Fiber optic leak detection Containment shell temperature probes Process temperature probes External flush plans Available Configurations G-Series: -75C (-100F) to 120C (250F) H-Series: -120C (-250F) to 290C (550F) See Bulletin P-10-14.
11
Mark 3 ISO Standard
Mark 3 ISO Self-Priming
Mark 3 ISO Recessed Impeller

12
Standards ISO 2858 ISO 5199 Operating Parameters Flows to 1400 m3/h (6160 gpm) Heads to 220 m (720 ft) Pressures to 25 bar (365 psi) Temperatures from -80C (-110F) to 350C (660F) 40 sizes with discharges from 20 mm (0.75 in) to 200 mm (8 in) Features Heavy-duty casing with integral foot and multi-ribbed discharge flange Reverse vane impeller standard; open impeller available SealSentry seal chambers Accepts multiple seal arrangements External micrometer impeller adjustment mechanism Standard non-contacting labyrinth seal Heavy-duty radial and thrust bearings One-piece, ductile iron bearing housing Back pullout design CE marked and compliant with applicable European directives such as ATEX; available with GOST cert. Related Configurations Mark 3 ISO Self-Priming Mark 3 ISO Recessed Impeller Mark 3 ISO Close Coupled CPXV Chemical Sump Mark 3 ISO centerline mounted See Bulletin PS-10-31.
Standards ISO 2858 ISO 5199 Operating Parameters Flows to 100 m3/h (440 gpm) Heads to 100 m (330 ft) Pressures to 25 bar (365 psi) Temperatures from -80C (-110F) to 350C (660F) Features One-piece casing with integral priming chamber, air separator and volute Reflux priming principle eliminates need for internal valves and external priming devices High-efficiency, low NPHSR, precision cast, semi-open impeller Run-dry capability SealSentry seal chambers Accepts multiple seal arrangements External micrometer impeller adjustment mechanism Standard non-contacting labyrinth seal Heavy-duty radial and thrust bearings Back pullout design CE marked and compliant with applicable European directives such as ATEX; available with GOST cert. Other Configurations Mark 3 ISO Close Coupled, Self-Priming Mark 3 ISO Magnetic Drive, Self-Priming See Bulletin PS-10-31.
Standards ISO 2858 ISO 5199 Operating Parameters Flows to 750 m3/h (3300 gpm) Heads to 100 m (330 ft) Pressures to 25 bar (365 psi) Temperatures from -80C (-110F) to 350C (660F) Features Heavy-duty casing with integral foot and multi-ribbed discharge flange Vortex action minimizes abrasive wear and maintains solids integrity Standard high-efficiency, semi-open impeller precision cast in CD4MCuN duplex stainless steel SealSentry seal chambers Accepts multiple seal arrangements External micrometer impeller adjustment mechanism Standard non-contacting labyrinth seal Heavy-duty radial and thrust bearings One-piece, ductile iron bearing housing Back pullout design CE marked and compliant with applicable European directives such as ATEX; available with GOST cert. Other Configurations CPXV Recessed Impeller, Vertical Sump Mark 3 ISO Close Coupled, Recessed Impeller See Bulletin PS-10-31.
Mark 3 ISO Close Coupled
CPXV Chemical Sump
CPXS Magnetic Drive
Standards ISO 2858 ISO 5199 Operating Parameters Flows to 750 m3/h (3300 gpm) Heads to 100 m (330 ft) Pressures to 25 bar (365 psi) Temperatures from -80C (-110F) to 350C (660F) Features Compact, space-saving configuration Investment cast muff coupling Heavy-duty casing with integral foot and multi-ribbed discharge flange Radiating surfaces Reverse vane impeller standard; open impeller available SealSentry seal chambers Accepts multiple seal arrangements External micrometer impeller adjustment mechanism Accepts standard electric motors Standard non-contacting labyrinth seal Back pullout design CE marked and compliant with applicable European directives such as ATEX; available with GOST cert. Other Configurations Mark 3 ISO Close Coupled, Recessed Impeller Mark 3 ISO Close Coupled, Self-Priming See Bulletin PS-10-31.
Standards ISO 13709/API 610, 8th & 10th ed. ISO 5199 Operating Parameters Flows to 1400 m3/h (6160 gpm) Heads to 250 m (820 ft) Pressures to 25 bar (365 psi) Temperatures from -40C (-40F) to 350C (660F) Features Heavy-duty casing with multi-ribbed discharge flange High-efficiency, semi-open impeller Column lengths to 10 m (32 ft) Heavy-duty thrust bearings with axial adjustment above soleplate level Accepts multiple seal arrangements Elastomeric split element coupling Options Recessed impeller Suction strainer Spacer coupling Rectangular or circular soleplate Oil lubrication to thrust bearing Zone hazardous area beneath soleplate configuration CE marked and compliant with applicable European directives such as ATEX; available with GOST cert. Other Configurations CPXV Recessed Impeller, Chemical Sump Fully jacketed, molten salt design See Bulletin PS-10-31.
Standards ISO 2858 ISO 15783 Operating Parameters Flows to 420 m3/h (1850 gpm) Heads to 160 m (525 ft) Pressures to 25 bar (365 psi) Temperatures from -40C (-40F) to 250C (480F) Features Reinforced PEEK or Alloy C-276 primary containment shell Optional Alloy C-276 secondary containment shell High-performance rare earth magnets Large inner magnet clearances Optimized internal flow circulation path Heavy-duty casing with integral foot and multi-ribbed discharge flange High-efficiency, low NPHSR, precision cast, semi-open impeller Advanced sintered silicon carbide bushings and journal bearings Standard and contained back pullout design CE marked and compliant with applicable European directives such as ATEX; available with GOST cert. Other Configurations Mark 3 ISO Close Coupled, Magnetic Drive Mark 3 ISO Magnetic Drive, Self-Priming See Bulletin PS-10-31.
PEEK is a registered trademark of Victrex plc Corp.
13
PolyChem GRP Engineered Polymer Composite
PolyChem VGRP Engineered Polymer Composite Sump
PolyChem S-Series Fluoropolymer Lined

14
Standards ASME (ANSI) B73.5 Operating Parameters Flows to 2050 m3/h (9000 gpm) Heads to 150 m (500 ft) Pressures to 17 bar (250 psi) Temperatures from -45C (-50F) to 120C (250F) Features Glass-reinforced vinyl ester Unitized casing with integrally molded, fully gusseted suction and discharge flanges Tapered polygon impeller drive Seal chamber accommodates multiple seals, glands and flush arrangements Standard Mark 3A power end External micrometer impeller adjustment mechanism Double row angular contact outboard bearings and single row, deep groove inboard bearings Double lip oil seals Constant level oiler Optional ANSI 3A power end with lifetime warranty Certified clean room assembly Inpro/Seal VBXX isolators Magnetic drain plug Related Configurations PolyChem VGRP engineered polymer composite sump Self-primer See Bulletin PS-10-17.
Standards Flowserve Operating Parameters Flows to 565 m3/h (2500 gpm) Heads to 110 m (350 ft) Pressures to 17 bar (250 psi) Temperatures from -30C (-20F) to 90C (200F) Features Glass-reinforced vinyl ester Unitized casing with integrally molded, fully gusseted suction and discharge flanges Externally adjustable, semi-open impeller Shaft and bearing system operates well below the first critical speed Self-lubricated or external flush bearings Single-piece, lightweight, filamentwound, reinforced fiberglass composite column Single and duplex configurations Full basket strainer NEMA in-line motor Fiberglass mounting plate Tapered polygon impeller drive Pullout bearing retainers Level controls Choice of shaft metallurgy Related Configurations PolyChem GRP engineered polymer composite See Bulletin PS-10-17.
Standards ASME (ANSI) B73.1 ISO 2858 JIS drilling Operating Parameters Flows to 420 m3/h (1850 gpm) Heads to 145 m (480 ft) Pressures to 17 bar (250 psi) Temperatures from -30C (-20F) to 150C (300F) Features PFA-lined wet end Metal armor meets material specifications of ASTM A395 and GGG 40.3 Enclosed impeller standard; open impeller optional Standard Mark 3A power end SealSentry seal chamber accommodates multiple seal types Shaft options Standard silicon carbide shaft sleeve Alloy shaft sleeves Solid shafts Bearing housing options Labyrinth oil seals Oil slinger Regreasable or double-shielded bearings Oil mist lubrication Optional ANSI 3A power end with lifetime warranty Certified clean room assembly Inpro/Seal VBXX isolators Magnetic drain plug See Bulletin PS-10-17.
PolyChem M-Series Fluoropolymer Lined, Magnetic Drive
Polyshield Baseplate and Foundation System
Polybase Polymer Concrete Baseplate
Standards ASME (ANSI) B73.1 ISO 2858 JIS drilling Operating Parameters Flows to 135 m3/h (600 gpm) Heads to 145 m (480 ft) Pressures to 17 bar (250 psi) Temperatures from -30C (-20F) to 150C (300F) Features PFA-lined wet end Ductile cast iron casing with 3 mm (0.1 in) minimum PFA liner PFA-lined fiberglass containment shell Enclosed PFA-lined impeller Rare earth magnets in synchronous drive Metal armor meets material specifications of ASTM A395 and GGG40.3 Separate inner magnet and impeller components Rotating shaft design Silicon carbide radial and axial thrust bearings Choice of bearing lubrication Options Long and close coupled designs ANSI 3A power end See Bulletin PS-10-17.
Standards Flowserve Operating Parameters Temperatures to 260C (500F) Features Combines non-metallic baseplate and formed concrete foundation for pump driver in one complete unit Excellent corrosion resistance Improved vibration dampening Reduced installation costs and time Solid one-piece polymer motor mounting block with four 304 SS transverse motor block adjusters Self-venting design with grout hole and plug Standard 316 stainless steel inserts Integral catch basin with NPT connection Uses 200 bar (3000 psi) concrete Suitable with ANSI, ISO, API and other foot-mounted and centerline mounted pumps Outstanding flatness Options Choice of three polymer materials Alloy 20 and Alloy C-276 inserts available CPVC drain connection See Bulletin PS-90-2.
Standards ANSI and ISO standard designs Features Solid polymer concrete construction Low installed cost Superior flatness Enhanced vibration dampening Excellent corrosion resistance Outstanding resistance to twisting or diaphragming 8-point adjuster alignment system Choice of three polymer materials Options Polybloc motor mounting blocks Catch basin Grout hole Alternate equipment inserts See Bulletin PS-10-13.
15
HPX (OH2) Centerline Mounted
HPXM (OH2) Centerline Mounted, Low-Flow
PHL (OH2) Centerline Mounted
Overhung API Process

Standards ISO 13709/API 610 (OH2), latest ed. Operating Parameters Flows to 2000 m3/h (8800 gpm) Heads to 350 m (1100 ft) Pressures to 80 bar (1160 psi) Temperatures from -160C (-250F) to 450C (842F) Features Centerline-supported casing Nozzle loading capability beyond ISO 13709/API 610 requirements Dynamically balanced impeller Rugged shaft design ISO 21049/API 682 seal chamber accommodates multiple seal types Choice of bearings Standard single row, deep groove, radial bearing and duplex, single row 40 angular contact thrust bearings Special bearing arrangements for high suction pressures Bearing lubrication and cooling options Oil mist and oil purge Fan cooling Finned cooling insert Related Configurations HPXT centerline mounted, top suction HPXH centerline mounted, high suction pressure HPXSL centerline mounted, slurry HPXIND centerline mounted, inducer HPXCC centerline mounted, coke crusher Standards ISO 13709/API 610 (OH2), latest ed. Operating Parameters Flows to 30 m3/h (130 gpm) Heads to 280 m (920 ft) Pressures to 80 bar (1160 psi) Temperatures from -160C (-250F) to 450C (842F) Features Low-flow, high-head design Replaceable volute inserts High-efficiency radial blade impeller Full interchangeability with HPX bearing assembly and mechanical seals Choice of bearings Standard single row, deep groove, radial bearing and duplex, single row 40 angular contact thrust bearings Special bearing arrangements for high suction pressures ISO 21049/API 682 seal chamber accommodates multiple seal types Bearing lubrication and cooling options Oil mist and oil purge Fan cooling Finned cooling insert Optional inducer Related Configurations HPX centerline mounted See Bulletin PSS-10-5.1. Standards ISO 13709/API 610 (OH2), latest ed. Operating Parameters Flows to 900 m3/h (4000 gpm) Heads to 400 m (1300 ft) Pressures to 40 bar (600 psi) Temperatures from -160C (-250F) to 450C (842F) Motor sizes to 110 kW (150 hp) Features Centerline-supported, end suction casing Custom-tuned hydraulics Multi-channel diffuser technology Customized BEP fits High efficiency Extended MTBR Low vibration Low noise Low shaft deflection at any flow ISO 21049/API 682 seal chamber accommodates multiple seal types including dual pressurized, unpressurized and gas Bearing housing cooling options Air fan Water jacket Replaceable diffusers Available boron diffusion surface treatment Other Configurations Top suction nozzle See Bulletin PSS-10-5.2.
16
See Bulletin PS-10-5.
ERPN Centerline Mounted
PVXM (OH3) Vertical In-Line
HWMA (OH3) Vertical In-Line, Low-Flow High-Head

Standards ISO 13709/API 610 (OH3), latest ed. Operating Parameters Flows to 45 m3/h (200 gpm) Heads to 440 m (1455 ft) Pressures to 60 bar (870 psi) Temperatures from -50C (-58F) to 260C (500F) Features Space-saving design Low-flow, high-head hydraulics Replaceable volute inserts Customizable hydraulics 80 BEP fits in a single pump size Casing and cover design with metalto-metal fits and fully confined compression gasket ASME (ANSI) B16.5 Class 600 raised face flanges; flat face optional Radial blade impeller Optional inducer for low NPSHR ISO 21049/API 682 seal chamber Heavy-duty motor support head fits NEMA, C-Face, P-base and IEC drivers 100% back pullout design Flexible disc spacer coupling Upper labyrinth bearing isolator; optional radial lip seals Choice of bearing lubrication systems Related Configurations WMA rigidly coupled, vertical in-line HWMA2 two-stage, vertical in-line WMA2 rigidly coupled, two-stage, vertical in-line See Bulletin PS-10-25.
Standards Flowserve Operating Parameters Flows to 1100 m3/h (4800 gpm) Heads to 230 m (750 ft) Pressures to 60 bar (870 psi) Temperatures to 350C (660F) Features Critical parameters meet ISO 13709/API 610 (OH2) Vibration limits Deflection limits at seal faces Nozzle loading capabilities Balancing grades ISO 21049/API 682 seal chamber accommodates multiple seal types Dynamically balanced, highefficiency impeller Centerline-supported casing Double volute design for discharge flanges 80 mm (3 in) and larger Renewable casing and cover wear rings Back pullout design Optional inducer Choice of API materials Related Configurations ERPN-O semi-open impeller High suction pressure: 35 bar (500 psi) See Bulletin PS-10-20.
Standards ISO 13709/API 610 (OH3), latest ed. Operating Parameters Flows to 500 m3/h (2200 gpm) Heads to 275 m (900 ft) Pressures to 40 bar (600 psi) Temperatures from -100C (-148F) to 250C (480F) Features Space-saving design Precision-machined diffusers Customizable hydraulics 150 BEP hydraulic fits with 10 casings Casing and cover design with metal-to-metal fits and fully confined compression gasket ASME (ANSI) B16.5 Class 300 raised face flanges Dynamically balanced impeller Optimized NPSHR due to suction box design ISO 21049/API 682 seal chamber Heavy-duty motor support head fits NEMA, C-Face and IEC drivers 100% back pullout design Flexible disc spacer coupling Upper and lower labyrinth bearing isolators; optional radial lip seals Bearing lubrication options Oil cascade Oil mist Grease lube Related Configurations PVML vertical in-line See Bulletin PS-10-29.
17
PVML (OH5) Vertical In-Line
MSP Vertical In-Line, Medium Speed
DSVP (OH4) Vertical In-Line

Standards ISO 13709/API 610 (OH5), latest ed. BS 4082R Operating Parameters Flows to 500 m3/h (2200 gpm) Heads to 275 m (900 ft) Pressures to 40 bar (580 psi) Temperatures from -100C (-148F) to 250C (480F) Features Space-saving, alignment-free design Custom-tuned hydraulics State-of-the-art diffuser technology Customized BEP fits High efficiency Extended MTBR Low vibration Low noise ISO 21049/API 682 seal chamber accommodates multiple seal types Dynamically balanced impeller Positively locked, anti-rotation impeller nut with threads unexposed to pumped fluid Related Configurations PVXM vertical in-line See Bulletin PS-10-28. Standards Flowserve Operating Parameters Flows to 27 m3/h (120 gpm) Heads to 900 m (2955 ft) Pressures to 60 bar (870 psi) Maximum suction pressure to 40 bar (580 psi) Temperatures from -40C (-40F) to 350C (660F) Speeds from 2000 rpm to 8000 rpm Features Closely follows ISO 13709/API 610 (OH4), latest edition Modified concentric volute Open impeller with balance holes and scallops Variable frequency drive Rigid coupling Single- or dual-cartridge mechanical seals Options Inducer Choice of materials Available Configurations Horizontal configuration MSP vertical in-line, single-stage MSP2 vertical in-line, two-stage (opposed impellers) See Bulletin PS-10-1. Standards ISO 13709/API 610 (OH4), latest ed. Operating Parameters Flows to 3400 m3/h (15 000 gpm) Heads to 150 m (492 ft) Pressures to 40 bar (600 psi) Temperatures to 340C (650F) Motor ratings to 895 kW (1200 hp) Features Space-saving design ISO 21049/API 682 seal chamber accommodates multiple seal types Double-suction enclosed impeller Double volute case design Standard case wear rings Optional impeller wear rings Metal-to-metal case to cover sealing with confined gasket Rigid spacer coupling Impeller nut design, threaded to tighten with rotation
18
M Hard Metal, Abrasive Slurry
R Radially Split, Rubber-Lined Slurry
Titan Slurry Heavy-Duty, Radially Split, Lined Slurry
Overhung Slurry and Solids Handling
Standards Flowserve Operating Parameters Flows to 10 000 m3/h (44 000 gpm) Heads to 90 m (300 ft) Pressures to 10 bar (150 psi); 50 bar (725 psi) with the highpressure model Temperatures to 120C (250F) Solids from 2% to 70% by weight Features One-piece high chrome iron, concentric casing with replaceable gland and suction side wear plates Closed impeller with pump-out vanes on front and rear shrouds Standard packing stuffing box with replaceable wear plate Full and low-flow flush connections Heavy-duty bearing frame designed for V-belt loads Cartridge style bearings Parts interchangeable with R pump Three-point external end clearance adjustment Options Vortex semi-recessed impeller Hard metal expeller Mechanical seal housing Related Configurations Severe-duty model High-pressure model MJ slurry sump MJC cantilever slurry sump See Bulletin PS-10-19.
Standards Flowserve Operating Parameters Flows to 10 000 m3/h (44 000 gpm) Heads to 50 m (165 ft) Pressures to 10 bar (150 psi) standard; 35 bar (510 psi) optional Temperatures to 110C (225F) Solids from 2% to 70% by weight Features Concentric, cast iron casing with replaceable, abrasion-resistant rubber liner Rubber-lined, closed impeller with front and rear pump-out vanes Standard packing stuffing box with replaceable wear plate Full and low-flow flush connections Heavy-duty bearing frame Three-point external end clearance adjustment Parts interchangeable with M pump Directly coupled or V-belt driven Options Acid-resistant stuffing box kits Hard metal expeller Mechanical seal housing Choice of liner materials Related Configurations RJ rubber-lined, slurry sump RJC cantilever rubber-lined, slurry sump See Bulletin PS-10-18.
Standards Flowserve Operating Parameters Flows to 3600 m3/h (16 000 gpm) Heads to 90 m (300 ft) Pressures to 40 bar (580 psi) Sizes from 50 mm (2 in) to 350 mm (14 in) Features Fully interchangeable elastomeric or hard metal liners Radially split casing High-efficiency, closed impeller Ample seal chamber accommodates a variety of packing and seal types Heavy-duty bearing frame sized to handle belt loads Bearing cartridge with back-to-back angular contact thrust bearings Roller-type radial bearings Contact lip seals Dimensionally compatible with the industrys most widely used pumps Optional expeller for dynamic sealing Available Configurations Metal-lined model Rubber-lined model High-pressure model See Bulletin PS-10-8.
19
LC Chemical Slurry
MND Hard Metal Absorber Recirculation
MNR Rubber-Lined Absorber Recirculation

20
Standards Flowserve Operating Parameters Flows to 8000 m3/h (35 200 gpm) Heads to 90 m (300 ft) Pressures to 25 bar (360 psi) Temperatures to 140C (285F) Specific gravities to 1.7 Features Concentric casing with tangential discharge Rigid, one-piece bearing frame with two angular contact outboard bearings and roller inboard bearings Large diameter, heavy-duty shaft Choice of shaft sealing options Wet gland packing Single or double mechanical seal High-pressure double mechanical seal Special high solids seals Alumina industry seal Choice of materials of construction Multiple impeller designs Direct-coupled or belt-driven Choice of six drive arrangements Options Inducer Stuffing box cooling system Related Configurations PL-C cantilever, chemical slurry sump LC-S lineshaft, chemical slurry sump See Bulletin PS-10-11.
Standards Flowserve Operating Parameters Flows to 17 500 m3/h (77 000 gpm) Heads to 40 m (130 ft) Sizes from 600 mm (24 in) to 1000 mm (40 in) Features One-piece, high-efficiency impeller with mixed flow vane design Multiple materials of construction Replaceable casing wear ring Opposed tapered roller bearings designed for a minimum B10 life of 100 000 hours Product flush slurry seal External end clearance adjustment Front and back pullout Related Configurations Vertical mounting MNR rubber-lined absorber recirculation See Bulletin PS-10-32.
Standards Flowserve Operating Parameters Flows to 17 500 m3/h (77 000 gpm) Heads to 40 m (130 ft) Sizes from 600 mm (24 in) to 1000 mm (40 in) Features One-piece, high-efficiency impeller with mixed flow vane design Removable one-piece elastomeric casing liner Radially split casing Multiple materials of construction Replaceable casing wear ring Opposed tapered roller bearings designed for a minimum B10 life of 100 000 hours Product flush slurry seal External end clearance adjustment Front and back pullout Related Configurations Vertical mounting MND hard metal absorber recirculation See Bulletin PS-10-32.
FRBH Heavy-Duty Paper Stock and Process
FRBHJC Cantilever Sump
MPT Self-Priming, Solids Handling
Standards Flowserve Operating Parameters Flows to 9085 m3/h (40 000 gpm) Heads to 100 m (330 ft) Pressures to 14 bar (200 psi) Temperatures to 150C (300F) Features Self-venting, top centerline discharge casing Semi-open, full vane impeller with back pump-out vanes Large suction inlet Seal chamber accepts packing or mechanical seal Three-point end clearance adjustment Back pullout design Heavy-duty, oil-lubricated bearings Fully split interlocking glands Extra heavy-duty alloy steel shaft Contoured wearplate match machined with impeller Dry shaft construction with sealed impeller nut and stainless steel hook sleeve Rigid, one-piece bearing frame Options Large conical seal housing Inducer Expeller Recessed impeller Related Configurations FRBHJC cantilever sump FRBHJ sump See Bulletin PS-10-16.
Standards Flowserve Operating Parameters Flows to 2700 m3/h (12 000 gpm) Heads to 100 m (330 ft) Temperatures to 150C (300F) Speeds to 1780 rpm Features True stiff shaft cantilever design, without bottom bearing or flushing water Steep head capacity Semi-open, full vane impeller with back pump-out vanes Direct coupled or V-belt driven Extra heavy-duty alloy steel shaft Related Configurations FRBH heavy-duty paper stock and process FRBHJ vertical lineshaft sump See Bulletin PS-10-16.
Standards Flowserve Operating Parameters Flows to 600 m3/h (2650 gpm) Heads to 35 m (115 ft) Working pressures to 5 bar (72 psi) Temperatures to 75C (165F) Sizes 50 mm (2 in) to 200 mm (8 in) Solids to 75 mm (3 in) diameter Features Two-vane, semi-open, solids handling impeller External impeller adjustment Abrasion-resistant, double mechanical seal Quick-disconnect cover plate Heavy-duty volute casing Replaceable seal housing Replaceable and reversible wear plate Solid one-piece flap valve Back pullout design Multiple drive options Extra large diameter shaft See Bulletin PS-10-9.
21
MF Solids Handling
MN Large Capacity, Solids Handling
MSX Solids Handling, Submersible

22
Standards Flowserve Operating Parameters Flows to 2275 m3/h (10 000 gpm) Heads to 90 m (300 ft) Sizes to 400 mm (16 in) Features Variety of nozzle position options Direct or independent motor mounting Minimal shaft deflection Oversized shaft and reduced overhang Hardened chrome steel wear rings Seal chamber accommodates packing or mechanical seals Adjustable impeller clearance Shaft sleeve options 316 stainless steel Hardened chrome steel Bearing housing features Ball or tapered roller bearings Integral jacking bolts for wear ring adjustment Accessible lubrication points Available Configurations MF horizontal, end suction MFV vertical with motor on separate floor (shown) MFC vertical with direct connected motor See Bulletin PS-10-3.
Standards Flowserve Operating Parameters Flows to 45 500 m3/h (200 000 gpm) Heads to 90 m (300 ft) Sizes to 1800 mm (72 in) Features Variety of nozzle position options Direct or independent motor mounting Minimal shaft deflection Oversized shaft and reduced overhang Hardened chrome steel wear rings Seal chamber accommodates packing or mechanical seals Adjustable wear ring clearance Shaft sleeve options 316 stainless steel Hardened chrome steel Bearing housing features Tapered roller bearings Integral jacking bolts for wear ring adjustment Accessible lubrication points Available Configurations MN horizontal, end suction MNF vertical, bottom suction, direct connected motor MNZ vertical, bottom suction, motor on separate floor MNC vertical with base elbow, direct connected motor MNV vertical with base elbow, motor on separate floor (shown) See Bulletin PS-10-4.
Standards Flowserve Operating Parameters Flows to 4545 m3/h (20 000 gpm) Heads to 90 m (300 ft) Temperatures to 40C (104F) Discharge sizes from 80 mm (3 in) to 500 mm (20 in) Motor ratings to 224 kW (300 hp) Solids handling to 80 mm (3 in) diameter spherical Features High-efficiency hydraulics EPACT-rated motor Spike-resistant windings Class H insulation system Dynamically balanced shaft and rotor Mounting options Wet-pit Dry-pit Transportable Available Configurations MSX Series 1: sizes from 75 mm (3 in) to 150 mm (6 in) MSX Series 2/3: sizes to 500 mm (20 in) See Bulletin PS-50-2.
D800 Series Cast Iron
MEN End Suction
MENBLOC Close Coupled
Overhung Industrial Process
Standards Flowserve Operating Parameters Flows to 340 m3/h (1500 gpm) Heads to 120 m (395 ft) Pressures to 15 bar (220 psi) Temperatures to 120C (250F) Features High-efficiency closed impeller Centerline discharge Sealed-for-life, pre-lubricated motor bearings with two-year minimum life Renewable wear rings and shaft sleeves Pre-set mechanical seal assembly Bell-type mechanical seal cover Standard NEMA C-face motor Back pullout design Threaded and flanged connections Available Configurations Type D-814 frame mounted Type D-824 close coupled Type D-834 vertical in-line See Bulletin PS-10-6.
Standards DIN 24255 EN 733 Flowserve Operating Parameters Flows to 800 m3/h (3520 gpm) Heads to 140 m (450 ft) Pressures to 16 bar (230 psi) Temperatures to 120C (250F) Features 33 sizes available Volute casing with top discharge Dynamically balanced, precision cast closed impeller with extended hub and machined shroud Impeller balance chamber and holes minimize axial thrust Open seal chamber with integral vortex breaking ribs Oversized stainless steel shaft Oversized bearings Standard case wear rings Back pullout design Related Configurations MEN-SP vertical cantilever sump MHP high-pressure MENBLOC close coupled ME horizontal high-capacity MEV vertical high-capacity See Bulletin PS-10-2.
Standards DIN 24255 EN 733 Flowserve Operating Parameters Flows to 340 m3/h (1500 gpm) Heads to 100 m (330 ft) Pressures to 16 bar (230 psi) Temperatures to 110C (230F) Features Compact, space-saving configuration End suction, top discharge, volute casing Dynamically balanced, precision cast high-efficiency closed impeller with extended hub Impeller balance chamber and holes minimize axial thrust Open seal chamber with integral vortex breaking ribs Oversized stainless steel shaft Oversized bearings Standard case wear rings Back pullout design Baseplate and coupling not required CE marked in Europe Related Configurations MEN horizontal end suction MEN-SP vertical cantilever sump MHP high-pressure ME horizontal high-capacity MEV vertical high-capacity See Bulletin PS-10-2.
23
ME End Suction
DS Double Volute, End Suction
SMP Standard Motor

24
Standards Flowserve Operating Parameters Flows to 3000 m3/h (13 200 gpm) Heads to 90 m (295 ft) Pressures from 4 bar (58 psi) to 16 bar (232 psi) Temperatures to 120C (250F) Features Single volute, end suction casing with tangential discharge Back pullout design Radial flow impeller shrouded, keyed on shaft Impeller balance holes minimize axial thrust Bearings Radial ball bearing and roller bearings (depending on size) Sealed-for-life for lower frames, rationalized with MEN sizes Grease-lubricated for higher frames Related Configurations MEV vertical, end suction MEN horizontal, end suction (low-capacity) MHP horizontal, end suction (low-capacity, high-pressure) DS horizontal, end suction (high-capacity)
Standards Flowserve Operating Parameters Flows to 5700 m3/h (25 000 gpm) Heads to 110 m (350 ft) Pressures to 27 bar (400 psi) Temperatures to 120C (250F) Features Double volute, end suction casing with centerline discharge Mechanically balanced, radial flow impeller Impeller balance holes minimize axial thrust Seal chamber accommodates packing and multiple mechanical seal types Back pullout design Angular contact thrust bearing and parallel roller radial bearing Grease lubrication standard; oil lubrication optional Choice of materials from cast iron to super duplex Related Configurations DSV vertical Directional discharge (90 on the right or on the left) Centerline mounted
Standards Flowserve Operating Parameters Flows to 135 m3/h (600 gpm) Heads to 70 m (220 ft) Pressures to 12 bar (175 psi) Temperatures from -40C (-40F) to 120C (250F) Features Glass reinforced polymer, high- efficiency, semi-open or closed impellers standard Industry standard NEMA motors Stainless steel, self-aligned mechanical seal Back pullout design Clamp-type mounting plate Options Cast iron, bronze or 316 stainless steel impellers Stub shaft design Related Configurations SMX non-metallic, standard motor pump VSMP vertical, standard motor pump See Bulletin PS-10-26.
SMX Non-Metallic Standard Motor
F-Line End Suction, Multistage
MVE End Suction
Standards Flowserve Operating Parameters Flows to 25 m3/h (100 gpm) Heads to 20 m (60 ft) Pressures to 12 bar (175 psi) Temperatures to 80C (180F) Features Polyphenylene sulfide (PPS) casing, adapter and impeller Standard NEMA 56J frame C-faced motor Stainless steel, self-aligned mechanical seal Back pullout design 40 mm (1.5 in) port size for hose connection Related Configurations SMP standard motor pump VSMP vertical standard motor pump See Bulletin PS-10-26.
Standards Flowserve Operating Parameters Flows to 500 m3/h (2200 gpm) Heads to 250 m (820 ft) Discharge pressures to 25 bar (365 psi) Temperatures to 105C (220F) Features Modular design 8 sizes 15 hydraulics 2 impeller types To 9 stages, depending on model and operating speed Sleeved shaft under sealing system Cast iron EN-GJL 250 pressure casings Cast iron EN-GJL 250 or NORyL impellers, depending upon model Steel grade C 35 E shaft 13% chromium steel sleeve Available Configurations FP horizontal, overhung impeller FM horizontal, close coupled FD vertical FS vertical, suspended shaft wet-pit FMD vertical, close coupled FAD vertical, rigid coupled
NORyL is a registered trademark of General Electric Company.
Standards Flowserve Operating Parameters Flows to 2700 m3/h (11 890 gpm) Heads to 15 m (50 ft) Pressures to 7 bar (100 psi) Temperatures to 100C (212F) Features Single volute casing with end suction and side discharge; top discharge optional Mechanically balanced, mixed flow impeller Seal chamber accommodates packing and multiple mechanical seal types Back pullout design Standard angular contact radial and thrust bearings Standard grease lubrication; oil lubrication optional Choice of materials Cast iron Ni-Resist Bronze Super duplex stainless steel
Ni-Resist is a registered trademark of the International Nickel Co., Inc.
25
Between Bearings Pumps

Single Case Axially Split Single-Stage LR 28 LNN 28 DVSH 28 LPN 29 Single Case Axially Split Multistage EC 30 UZDL 30 DMX 30 Single Case Radially Split Single-Stage HDX 31 HDX-TT 31 DVSR 31 Single Case Radially Split Multistage HED 32 HED-DS 32 WTB 32 WD 33 WDX 33 NM 33 WX 33 CSX 34 WXH 34 Double Case WXB WXB-B WNC CSB CHTA HDB HSB BP WCC HDO HSO WIK WIKO 35 35 35 35 36 36 36 36 37 37 37 37 37
Between Bearings Pumps Between Bearings Pumps

27
LR Axially Split, Single-Stage
LNN Axially Split, DoubleSuction, Single-Stage
DVSH (BB1) Axially Split, DoubleSuction, Single-Stage
Between General Single OverhungBearings Industry Case Axially Split Single Stage
28
Standards Flowserve Operating Parameters Flows to 2000 m3/h (8800 gpm) Heads to 170 m (560 ft) Pressures to 21 bar (300 psi) Temperatures from -30C (-20F) to 150C (300F) Features Split-case design with lifting lugs Low NPSH double-suction impeller on many sizes Flat or raised face suction and discharge flanges to ANSI, DIN and ISO standards Oil- or grease-lubricated radial and thrust bearings Single row, deep groove ball bearings or duplex thrust ball bearings 100 000 hours typical L10 bearing life Seal chamber accommodates multiple seal types Standard case wear rings; optional serrated groove designs Optional impeller wear rings Available high-performance coatings Related Configurations LRV vertical, axially split, single-stage LLR axially split, two-stage See Bulletin PS-20-3.
Standards Flowserve Operating Parameters Flows to 30 000 m3/h (132 000 gpm) Heads to 300 m (985 ft) Pressures to 40 bar (580 psi) Temperatures to 140C (285F) Features Heavy-duty, double volute casing with side suction and side discharge Flanges to ANSI, DIN and ISO standards Hydraulically balanced doublesuction impeller Optimum axial and radial thrust balance Standard casing wear rings; optional impeller wear rings Seal chamber accommodates packing and multiple mechanical seal types 360 supported bearing housing Choice of bearings Standard ball radial and ball thrust Optional double row, angular contact thrust bearings Optional sleeve bearings Grease lubrication standard; oil mist and bath optional Choice of materials Related Configurations LNNV vertical, single-stage LNNC single-stage, bottom suction LNE, LNS, LNST and LNGT axially split, single-stage See Bulletin PS-20-1.
Standards ISO 13709/API 610 (BB1), latest ed. Operating Parameters Flows to 12 000 m3/h (52 835 gpm) Heads to 565 m (1854 ft) Pressures to 150 bar (2175 psi) Temperatures to 204C (400F) Speeds to 6000 rpm Features Double volute casing Hydraulically balanced doublesuction impeller ISO 21049/API 682 seal chambers accommodates multiple seal types Stiff shaft design Baseplate designs and pump packages engineered to contract requirements Choice of bearings Ball radial and thrust Sleeve radial and ball thrust Sleeve radial and tilting pad thrust Choice of materials Carbon steel 12% chrome Austenitic stainless steels Duplex stainless steels See Bulletin PS-20-2.
LPN (BB1) Axially Split, DoubleSuction, Single-Stage
Between General Single OverhungBearings Industry Case Axially Split Single Stage
Standards ISO 13709/API 610 (BB1), latest ed. Operating Parameters Flows to 15 000 m3/h (65 000 gpm) Heads to 250 m (820 ft) Pressures to 25 bar (365 psi); 50 bar (725 psi) with LPN-H model Temperatures from -80C (-110F) to 204C (400F) Features Double volute, near-centerline supported casing ASME (ANSI) B16.5 Class 150 or Class 300 raised face flanges Confined gasket design Hydraulically balanced doublesuction impeller ISO 21049/API 682 seal chambers Baseplate designs and pump packages engineered to contract Heavy-duty, bracketed, 180 supported carbon steel bearing housing Standard non-contacting labyrinth seals Choice of bearings Ball radial and ball thrust with oil flinger system Split sleeve radial and ball thrust with ring oil system Split sleeve radial and tilting pad thrust with pressure lubrication Other Configurations LPN-H high-pressure, double-suction LPN-V vertical in-line See Bulletin PS-20-5.
29
EC Axially Split, Multistage
UZDL (BB1) Axially Split, Two-Stage
DMX (BB3) Axially Split, Multistage
Between General Single OverhungBearings Industry Case Axially Split Multistage

30
Standards Flowserve Operating Parameters Flows to 2340 m3/h (10 300 gpm) Heads to 650 m (2130 ft) Pressures to 88 bar (1300 psi) Temperatures from -30C (-20F) to 150C (300F) Features Horizontally split case with integral mounting feet In-line mounted impellers Rotating assembly balanced as a unit Case wear rings standard at impeller eye Diaphragm rings standard at impeller back shroud Shaft protected by interstage and packing sleeves Seal chambers accommodate packing or mechanical seals Double-row antifriction radial and thrust bearings Grease lubrication
Standards ISO 13709/API 610 (BB1), latest ed. Operating Parameters Flows to 2950 m3/h (13 000 gpm) Heads to 685 m (2250 ft) Pressures to 64 bar (910 psi) Temperatures to 204C (400F) Speeds to 2000 rpm Features Double volute hydraulic passages ISO 21049/API 682 seal chambers Shaft options Double extension for connection to auxiliary pumps or hydraulic turbines Special shaft end machining for hydraulic fitted couplings Baseplate designs and pump packages engineered to contract Dynamic balancing and TIR verifications on assembled rotors Choice of bearings Ball radial and thrust Sleeve radial and ball thrust Sleeve radial and tilting pad thrust Tilting pad radial and tilting pad thrust Choice of materials Carbon steel 12% chrome Austenitic stainless steels Duplex stainless steels Monel See Bulletin PS-30-2.
Monel is a registered trademark of International Nickel Co.
Standards ISO 13709/API 610 (BB3), latest ed. Operating Parameters Flows to 2950 m3/h (13 000 gpm) Heads to 2130 m (7000 ft) Pressures to 275 bar (4000 psi) Temperatures to 204C (400F) Speeds to 6000 rpm Features Double volute hydraulic passages Renewable case and impeller wear rings ISO 21049/API 682 seal chambers Axially split center bushing Shaft options Double extension for connection to auxiliary pumps or hydraulic turbines Special shaft end machining for hydraulic fitted couplings Interstage take-off option Baseplate designs and pump packages engineered to contract Dynamic balancing and TIR verifications on assembled rotors Choice of bearings Ball radial and thrust Sleeve radial and ball thrust Sleeve radial and tilting pad thrust Choice of bearing lubrication systems Choice of bearing cooling systems Choice of materials See Bulletin PS-30-3.
HDX (BB2) Radially Split, DoubleSuction, Single-Stage
HDX-TT (BB2) Radially Split, Power Recovery Turbine
DVSR (BB2) Radially Split, Volute Casing, Single-Stage
Between General Single OverhungBearings Industry Case Radially Split Single-Stage
Standards ISO 13709/API 610 (BB2), latest ed. Operating Parameters Flows to 4100 m3/h (18 000 gpm) Heads to 450 m (1500 ft) Pressures to 42 bar (610 psi); 100 bar (1450 psi) with HDX-H model Temperatures to 450C (842F) Features Double volute, centerline supported, self-venting casing ASME (ANSI) B16.5 Class 300 flanges; optional Class 600 and 900 flanges Dynamically balanced, double- suction impeller Stiff shaft design ISO 21049/API 682 seal chambers Standard dual single-row, back-toback mounted, angular contact thrust bearing Bearing options Sleeve radial and ball thrust Sleeve radial and tilting pad thrust Lubrication systems available 360 supported bearing housing Double case covers Related Configurations HDX-H high-pressure, radially split, double-suction In-line side nozzles Same-side nozzles (90 rotated) See Bulletin PS-20-4.
Standards ISO 13709/API 610 (BB2), latest ed. Operating Parameters Flows to 4100 m3/h (18 000 gpm) Heads to 760 m (2500 ft) Pressures to 100 bar (1450 psi) Temperatures to 450C (842F) Features Double volute, centerline supported, self-venting casing with diffuser ASME (ANSI) B16.5 Class 300 flanges; optional Class 600 and 900 flanges Dynamically balanced, double- suction, radial inflow turbine runner Stiff shaft design ISO 21049/API 682 seal chambers Standard dual single-row, back-toback mounted, angular contact thrust bearing Bearing options Sleeve radial and ball thrust Sleeve radial and tilting pad thrust Lubrication systems available 360 supported bearing housing Double case covers Other Configurations High-pressure In-line side nozzles Side-side nozzles (90 rotated)
Standards ISO 13709/API 610 (BB2), latest ed. Operating Parameters Flows to 3635 m3/h (16 000 gpm) Heads to 250 m (820 ft) Pressures to 260 bar (3750 psi) Temperatures to 204C (400F) Speeds to 4000 rpm Features Double volute casing Hydraulically balanced doublesuction impeller Staggered vane impellers Stiff shaft design IS0 21049/API 682 seal chambers Baseplate designs and pump packages engineered to contract Choice of bearings Sleeve radial and ball thrust Sleeve radial and tilting pad thrust Tilting pad radial and tilting pad thrust Choice of materials Carbon steel 12% chrome
31
HED (BB2) Radially Split, Two-Stage
HED-DS (BB2) Radially Split, DoubleSuction, Two-Stage
WTB (BB2) Radially Split, DoubleSuction, Three-Stage
Between General Single OverhungBearings Industry Case Radially Split Multistage

32
Standards ISO 13709/API 610 (BB2), latest ed. Operating Parameters Flows to 1000 m3/h (4400 gpm) Heads to 650 m (2100 ft) Pressures to 120 bar (1750 psi) Temperatures to 450C (842F) Features Heavy-duty, double volute casing with 180 staggered volutes Top-top nozzle configuration ISO 21049/API 682 seal chambers Dynamic balancing and TIR verifications on assembled rotating element Baseplate designs and pump packages engineered to contract Choice of bearings Ball radial and thrust Sleeve radial and ball thrust Sleeve radial and tilting pad thrust Choice of materials Carbon steel 12% chrome Austenitic stainless steel Duplex stainless steel Monel lining Other Configurations HED-DS radially split, double-suction, two-stage In-line side nozzles Same-side nozzles High-pressure See Bulletin PS-30-4.
Standards ISO 13709/API 610 (BB2), latest ed. Operating Parameters Flows to 2500 m3/h (11 000 gpm) Heads to 750 m (2460 ft) Pressures to 120 bar (1750 psi) Temperatures to 450C (842F) Features Double-suction, first-stage impeller Heavy-duty, double volute casing with 180 staggered volutes Top-top nozzle configuration ISO 21049/API 682 seal chambers Dynamic balancing and TIR verifications on assembled rotating element Baseplate designs and pump packages engineered to contract Choice of bearings Ball radial and thrust Sleeve radial and ball thrust Sleeve radial and tilting pad thrust Choice of materials Carbon steel 12% chrome Austenitic stainless steel Duplex stainless steel Monel lining Other Configurations HED radially split, two-stage In-line side nozzles Same-side nozzles High-pressure See Bulletin PS-30-4.
Standards ISO 13709/API 610 (BB2), latest ed. Operating Parameters Flows to 1400 m3/h (6165 gpm) Heads to 1100 m (3610 ft) Pressures to 108 bar (1565 psi) Temperatures to 430C (800F) Speeds to 3600 rpm Features Meets intent of key ISO/API requirements Heavy-duty, centerline supported, double volute casing with integral crossover ASME (ANSI) B16.5 Class 300 flanges; Class 600 and 900 flanges optional Dynamically balanced, double-suction first-stage impeller; single-suction on smallest three-stage only Balance holes on second- and thirdstage impellers IS0 21049/API 682 seal chambers 360 supported bearing housing Choice of bearings Sleeve radial and ball thrust Sleeve radial and tilting pad thrust Dual, single row, angular contact antifriction thrust bearings installed back-to-back and single row, deep groove antifriction radial bearing Available Configurations WTB three-stage, double-suction WTB two-stage, single-suction WTB two-stage, double-suction See Bulletin PS-30-14.
WD and WDX Radially Split, Multistage, Ring Section
NM Radially Split, Multistage, Ring Section
WX Radially Split, Multistage, Ring Section
Standards Flowserve Operating Parameters Flows to 190 m3/h (800 gpm) Heads to 700 m (2300 ft) Pressures to 75 bar (1090 psi) Temperatures to 210C (410F) Features Multivane diffusers Identical radially split ring section sets O-ring interstage sealing arrangement Deep groove ball bearing design Angular contact, double row thrust bearing 360 machine registered bearing housing fits Dynamically balanced, precision machined enclosed impellers Packing or mechanical sealing Options Multiple flange orientations End suction design with product lubricated sleeve bearing Radial suction design with product lubricated sleeve bearing Inducer
Standards Flowserve Operating Parameters Flows to 3000 m3/h (13 210 gpm) Heads to 500 m (1640 ft) Pressures to 60 bar (870 psi) Temperatures to 140C (285F) Features Modular design 15 sizes 22 hydraulics Low NPSH suction volute design Machined impeller shrouds for increased efficiency Impeller balance holes minimize axial thrust Shrouded diffusers with return guide vanes minimize radial thrust Removable seal housings accommodate gland packing and mechanical seals Standard cast iron construction; high alloy construction available Other Configurations NMV vertical, multistage ring section NMD vertical, multistage ring section NM-S vertical, suspended shaft wet-pit NMAD vertical, rigid shaft coupling
Standards Flowserve Operating Parameters Flows to 300 m3/h (1320 gpm) Heads to 1200 m (3940 ft) Pressures to 150 bar (2175 psi) Temperatures from -50C (-58F) to 204C (400F) Features Separate cast diffusers and channel rings Centerline mounted, self-venting casing Top-top nozzles Interstage O-ring seals Individual impeller balance Precision-fit rotor Optional inducer for low NPSHR
33
CSX Radially Split, Multistage, Ring Section
WXH Radially Split, Multistage, High-Pressure, Ring Section

34
Standards Flowserve Operating Parameters Flows to 600 m3/h (2650 gpm) Heads to 900 m (2950 ft) Pressures to 100 bar (1450 psi) Features Multistage, ring section, foot mounted design Dynamically balanced, precision cast, high-efficiency impellers Renewable case wear rings Precision cast diffuser and channel rings Flexible nozzle orientation Self-compensating balancing device Symmetrical suction and discharge heads Generously proportioned shaft Choice of bearings Ball radial and thrust Sleeve radial and ball thrust Sleeve radial and tilting pad thrust Corrosion-resistant construction with options including duplex stainless steels, super duplex stainless steels, and proprietary Alloy 885 See bulletin PS-30-15.
Standards Flowserve Operating Parameters Flows to 900 m3/h (4000 gpm) Heads to 2650 m (8700 ft) Pressures to 250 bar (3625 psi) Temperatures to 250C (480F) Features Cast suction and discharge heads with integral nozzles Single- or double-suction, first-stage impeller designs Investment cast diffusers and return channel hydraulic passages Compression interstage O-ring Separate, high-strength, sub-base Replaceable stationary wear parts mounted in the diffusers Standard flanged balance drum with serrated running clearances; optional straight balance drum Seal chamber accepts single, double and tandem mechanical seals Large diameter shaft with staggered impeller and balancing device keyways No pre-warming required Chrome steel nozzles Choice of bearings Ball radial and thrust Sleeve radial and ball thrust Sleeve radial and tilting pad thrust See Bulletin PS-30-1.
WXB and WXB-B Diffuser Casing, Multistage, Process Barrel
WNC Diffuser Casing, Multistage, Utility Barrel
CSB Diffuser Casing, Multistage, Utility Barrel
Between General Double OverhungBearings Industry Case
Standards ASME Section VIII Operating Parameters Flows to 300 m3/h (1320 gpm) Heads to 1200 m (3940 ft) Pressures to 150 bar (2175 psi) Temperatures to 200C (390F) Features Diffuser case construction Removeable cartridge inner case subassembly Large eye first-stage impeller Low-flow, high-head Barske impeller on WXB-B Proprietary balancing device Sleeve mounted deep groove radial and back-to-back mounted angular contact bearings High-capacity, antifriction thrust bearing Bearing lubrication system with oil bath, constant level oiler and sight glass Renewable casing and impeller rings High shaft diameter to bearing span ratio Options Hydrodynamic sleeve radial bearings Thrust bearing cooling system (air) Labyrinth end seals Available Configurations WXB: standard hydraulics WXB-B: low-flow, high-head hydraulics See Bulletins PS-30-6 and PSS-30-6.1.
Standards ASME Section VIII Operating Parameters Flows to 1400 m3/h (6200 gpm) Pressures to 350 bar (5075 psi) Temperatures to 200C (390F) Features Diffuser case construction Shear ring design High-strength forged steel barrel; alloy barrels available Removable cartridge inner case subassembly Shear ring barrel closing system Single- or double-suction, firststage impeller Standard antifriction or sleeve radial bearings High-capacity antifriction thrust bearing; tilting pad thrust bearing available Renewable casing rings Straight balance drum forged from hardened stainless steel Chrome-plated shafting under journal bearings Ground forged steel shafting Related Configurations WNC-HP high-pressure, diffuser casing, multistage, utility barrel See Bulletin PS-30-12.
Standards ASME Section VIII Operating Parameters Flows to 1500 m3/h (6600 gpm) Discharge pressures to 300 bar (4350 psi) Temperatures to 250C (480F) Speeds to 8000 rpm Features Internal casing with segmented stage elements Diffuser guide-vane construction Precision cast in-line impellers of high-quality chrome steel Heavy-duty barrel with forged steel discharge cover Fully enclosed or shrouded precision cast diffusers on high-energy applications Tilt pad thrust and tri-land radial bearings Renewable casing rings and sleeves Flanged balance drum forged from hardened stainless steel; straight drum optional Chrome-plated shafting under journal bearings Ground forged steel shafting See Bulletin PS-30-12.
35
CHTA Diffuser Casing, Multistage, Utility Barrel
HDB and HSB Volute Casing, Multistage, Utility Barrel
BP (BB5) Diffuser Casing, Multistage, Process Barrel

36
Standards ASME Section VIII Operating Parameters Flows to 5250 m3/h (23 000 gpm) Heads to 4300 m (14 000 ft) Discharge pressures to 517 bar (7500 psi) Temperatures to 250C (480F) Speeds to 6000 rpm Features Internal casing with segmented stage elements Diffuser guide-vane construction Precision cast in-line impellers of high-quality chrome steel Heavy-duty barrel with forged steel discharge cover Fully enclosed or shrouded precision cast diffusers on highenergy applications Balance drum and sleeve made from hardened stainless steel forgings Tilt pad thrust and tri-land radial bearings Serrated running fits Renewable casing rings and sleeves Flanged balance drum design Chrome-plated shafting under journal bearings Ground forged steel shafting See Bulletin PS-30-13.
Standards ASME Section VIII Operating Parameters Flows to 4000 m3/h (17 610 gpm) Heads to 4300 m (14 000 ft) Discharge pressures to 450 bar (6525 psi) Temperatures to 425C (800F) Speeds to 9000 rpm Features Axially split inner casing Double volute design with symmetrical upper and lower halves Opposed impeller design Volute and impellers are cast of high-quality chrome steel Heavy-duty forged steel barrel and discharge cover Individually mounted and secured impellers Dynamic balancing and TIR verifications on assembled rotor Minimal pressure breakdowns across running clearances Sleeve radial and tilting pad thrust bearings Baseplate designs and pump packages engineered to contract requirements See Bulletin PS-30-12.
Standards ISO 13709/API 610 (BB5), latest ed. Operating Parameters Flows to 1050 m3/h (4620 gpm) Heads to 3500 m (11 480 ft) Discharge pressures to 295 bar (4260 psi) Temperatures to 425C (800F) Speeds to 6000 rpm Features Diffuser guide-vane inner casing with segmented stage elements Inner casing bolted head at one end Heavy-duty barrel with forged steel discharge cover Multi-vane diffuser and channel ring design Precision cast diffusers Precision cast keyed impellers; optional shrink-fit impellers for highspeed or high-temperature service Single- or double-suction, first-stage impeller Straight style balance drum Forged shaft; optional stepped shaft for high-speed or hightemperature service Choice of bearings Ball radial and ball thrust with oil flinger lubrication system Sleeve radial and tilting pad thrust bearings with pressure lubrication system See Bulletin PS-30-11.
WCC (BB5) Diffuser Casing, Multistage, Process Barrel
HDO and HSO (BB5) Volute Casing, Multistage, Process Barrel
WIK and WIKO (BB5) Diffuser Casing, Multistage, Process Barrel
Standards ISO 13709/API 610 (BB5), latest ed. Operating Parameters Flows to 1000 m3/h (4400 gpm) Heads to 2800 m (9200 ft) Discharge pressures to 275 bar (3987 psi) Temperatures to 425C (800F) Speeds to 3580 rpm; 6000 rpm with high-speed option Features Internal casing with segmented stage elements Diffuser guide-vane construction Multi-vane, diffuser-channel ring collectors Precision cast chrome steel in-line impellers Single- or double-suction, first-stage impeller Heavy-duty barrel with discharge cover Removable cartridge inner case subassembly Straight or flanged balance drum with serrated running surfaces Tilt pad thrust and heavy-duty journal bearings Force feed lubricated bearings Precision-ground forged steel shafting See Bulletin PS-30-7.
Standards ISO 13709/API 610 (BB5), latest ed. Operating Parameters Flows to 4000 m3/h (17 610 gpm) Heads to 5365 m (16 000 ft) Discharge pressures to 450 bar (6525 psi) Temperatures to 425C (800F) Speeds to 9000 rpm Features Axially split inner casing Double volute design with symmetrical upper and lower halves Opposed impeller design Heavy-duty forged steel barrel and discharge cover Individually mounted and secured impellers Dynamic balancing and TIR verifications on assembled rotor Sleeve radial and tilting pad thrust bearings Baseplate designs and pump packages engineered to contract requirements Metallurgies per ISO 13709/API 610 Other Configurations Coke crusher (for most sizes) See Bulletin PS-30-8.
Standards ISO 13709/API 610 (BB5), latest ed. Operating Parameters Flows to 4000 m3/h (17 610 gpm) Heads to 7000 m (23 000 ft) Discharge pressures to 650 bar (9425 psi) Temperatures to 450C (842F) Speeds to 13 000 rpm Features Radially split inner casings Multi-vane diffuser and channel ring design Tandem or imposed impellers Inner casing with a bolted head at one end Optional cartridge element design Optional shear ring design Heavy-duty forged steel barrel casing and discharge head Precision cast and milled diffusers Precision cast impellers Shrink-fit and double-keyed impellers Straight balance drum Tilt pad thrust and sleeve radial bearings Large diameter shaft stepped at each impeller and balance drum NEMA taper shaft extension Available Configurations WIK: tandem impellers WIKO: opposed impellers Coke crusher (for most sizes) See Bulletin PS-30-9.
37
Vertical Pumps
Wet-Pit WUJ VTP QL QLQ VCT AFV CVP Double Case QLC QLQC VPC WUC APKD Submersible Pleuger SUBM Byron Jackson SUBM MSX Slurry and Solids Handling MVX MFV MNV FRBHJC MJ MJC RJ RJC Terra-Titan MSX Drain-Titan Sump CPXV Chemical Sump ESP3 Chemical Sump PolyChem VGRP Drain-Titan VSMP ECPJ 40 40 40 40 41 41 41 42 42 42 42 43 44 44 44 45 45 45 46 46 46 46 46 47 47 47 48 48 48 49 49 49
Vertical Pumps
39
WUJ (VS1) Vertical Lineshaft, Multistage
VTP Vertical Turbine
QL and QLQ Vertical, Double-Suction, Double Volute
Vertical Wet-Pit
Standards ISO 13709/API 610 (VS1), latest ed. ASME Sections VIII and IX Directive 94/9/EC (ATEX 100) Operating Parameters Flows to 3000 m3/h (13 200 gpm) Heads to 2000 m (6560 ft) Pressures to 200 bar (2900 psi) Temperatures from -200C (-328F) to 350C (660F) Features Radial or mixed flow hydraulics Multivane diffuser design Optional axial thrust tilting pad bearing configuration Stiff shaft design ISO 21049/API 682 seal chamber accommodates multiple seal types Flanged spacer coupling Screen-type, non-sparking coupling guard Casing and impeller wear rings Centerline aligned and flanged columns Reinforced motor stand Optional inducer Related Configurations WUC (VS6) double case, multistage See Bulletin PS-40-8. Standards Flowserve Operating Parameters Flows to 13 600 m3/h (60 000 gpm) Heads to 700 m (2300 ft) Pressures to 100 bar (1450 psi) Temperatures from -45C (-50F) to 300C (570F) Sizes from 150 mm (6 in) to 1375 mm (54 in) Settings to 365 m (1200 ft) Features Above- or below-grade discharge Enclosed or semi-open impellers Open or enclosed lineshaft construction Product or enclosed oil lubrication Flanged or threaded column pipe High-pressure stuffing box Rigid, adjustable coupling Drive options Hollow or solid shaft motor Dry or submersible electric motors Variable speed drives Engine with right angle gear Steam turbine Options Thrust-balanced impeller O-ring bowl Adjustable flanged coupling Related Configurations VTP molten salt design VPC vertical turbine, double case See Bulletin PS-40-7. Standards Flowserve ASME Sections VIII and IX Operating Parameters Flows to 25 000 m3/h (110 000 gpm) Heads to 500 m (1640 ft) Pressures to 70 bar (1015 psi) Temperatures to 204C (400F) Column sizes to 1500 mm (60 in) Features Heavy-wall double volute casing Double-suction, first-stage impeller Open lineshaft standard; enclosed lineshaft optional Heavy-duty discharge head Sealed-for-life bottom bearing Options ISO 13709/API 610 (VS2), latest ed., and Directive 94/9/EC (ATEX 100) compliant configurations Vertical solid shaft or hollow shaft motors with thrust bearing Oiler and solenoid switch for pump bearing lubrication Water, grease or oil lubricant Lubrication lines for bottom bearing Antifriction (self-lubricated) or tilting pad axial thrust bearing assembly Rigid, adjustable spacer coupling Available Configurations QL single-stage QLQ multistage QLC double case, single-stage QLQC double case, multistage See Bulletin PS-40-4.
40
VCT Vertical, Mixed Flow
AFV Vertical, Axial Flow
CVP Vertical, Concrete Volute
Vertical Wet-Pit
Standards Hydraulic Institute AWWA Operating Parameters Flows to 181 700 m3/h (800 000 gpm) Heads to 110 m (350 ft) Sizes from 1200 mm (48 in) to 3380 mm (133 in) Features Five-mitered elbow discharge head with above- or below-grade discharge Pullout or non-pullout construction Flanged outer column with integral bearing bracket Enclosed or semi-open impellers Oil, freshwater or self-lubricating column construction Seal chamber accepts packing or mechanical seal Three-piece rigid, adjustable motor coupling Shaft sleeves under the bearings and seal chamber Options Discharge head with integral axial thrust bearing assembly Cast or fabricated bowl assembly Integrated suction bell bearing bracket Multiple stages Thrust collar Sand cap Engineered to customer specifications See Bulletin PS-40-6.
Standards Flowserve Operating Parameters Flows to 181 700 m3/h (800 000 gpm) Heads to 11 m (35 ft) Speeds to 1770 rpm Sizes from 200 mm (8 in) to 3.1 m (123 in) Settings to 8 m (25 ft) Features Three- or four-vane axial flow design Cast or fabricated bowl assembly Flanged outer column pipe with integral bearing bracket Oil, freshwater or self-lubricating lineshaft construction Fabricated discharge with mitered elbow Above- or below-ground discharge Multiple drive options Solid or hollow shaft motor Steam turbine Diesel engine Options Casing liners Integral axial thrust bearing assembly See Bulletin PS-40-3.
Standards Flowserve Hydraulic Institute Operating Parameters Flows to 115 000 m3/h (500 000 gpm) Heads to 45 m (147 ft) Features Vertical dry-pit design Removable metallic pump pullout unit within a concrete volute Suction bell connected to preformed high-efficiency, vortex-free concrete suction box Open mixed flow and closed mixed flow impeller options Dry shaft design No submerged bearings Bearings and sealing systems easily accessible Prefabricated concrete segments Highly corrosion and erosion resistant Liquidyne or mechanical shaft seal Inflatable static seal Engineered to customer specifications Available Configurations BSV open mixed flow impeller design BCV closed mixed flow impeller design See Bulletin PS-40-1.
Liquidyne is a registered trademark of IHC.
41
QLC and QLQC Vertical, Double Case, Double-Suction, Double Volute
VPC Vertical Turbine, Double Case
WUC (VS6) Vertical, Double Case, Multistage
Vertical Double Case

Standards Flowserve ASME Sections VIII and IX Operating Parameters Flows to 25 000 m3/h (110 000 gpm) Heads to 500 m (1640 ft) Pressures to 70 bar (1015 psi) Temperatures from -45C (-50F) to 204C (400F) Features Double case construction Heavy-wall double volute casing Double-suction, first-stage impeller Open lineshaft construction Seal chamber accommodates cartridge-style single, dual unpressurized and dual pressurized mechanical seals Heavy-duty discharge head Options ISO 13709/API 610 (VS7), latest ed., compliant designs Directive 94/9/EC (ATEX 100) available Hollow or solid shaft motor with thrust bearing Antifriction (self-lubricated) or tilting pad axial thrust bearing assembly Rigid, adjustable spacer coupling Available Configurations QLC double case, single-stage QLQC double case, multistage QL single-stage QLQ multistage Standards ASME Sections VIII and IX Hydraulic Institute AWWA Operating Parameters Flows to 13 600 m3/h (60 000 gpm) Heads to 1070 m (3500 ft) Pressures to 100 bar (1450 psi) Temperatures from -45C (-50F) to 230C (450F) Features Diffuser design Above- or below-grade discharge ASME Class 150 or 300 slip-on flanges Single or multistage designs Enclosed or semi-open impellers Large eye first-stage impeller Product or oil bearing lubrication Flanged column pipe High-pressure stuffing box Rigid, adjustable flanged coupling Drive options Hollow or solid shaft motor Variable speed drive Engine with right angle gear Steam turbine Other options Integral axial thrust bearing assembly O-ring construction Keyed impellers Bowl and impeller wear rings Related Configurations VTP vertical turbine See Bulletin PS-40-2. Standards ISO 13709/API 610 (VS6), latest ed. ASME Sections VIII and IX German Pressure Vessel Association (AD) British Standard BS 5500 Compliance with Pressure Equipment Directive 97/23/EC Operating Parameters Flows to 3000 m3/h (13 200 gpm) Heads to 2000 m (6560 ft) Pressures to 200 bar (2900 psi) Temperatures from -200C (-328F) to 350C (660F) Features Radial or mixed flow hydraulics Low suction velocity can design Optional axial thrust tilting pad bearing configuration Stiff shaft design ISO 21049/API 682 seal chamber accommodates multiple seal types Flanged spacer coupling Screen-type, non-sparking coupling guard Inside drain line Casing and impeller wear rings Reinforced motor stand Optional inducer Related Configurations WUJ (VS1) vertical line shaft, multistage WUC-LNG cryogenic (VS6) double case, multistage See Bulletin PS-40-9.
42
APKD Vertical, Double Case, Double-Suction
Vertical Double Case
Standards Flowserve Operating Parameters Flows to 4600 m3/h (20 200 gpm) Heads to 500 m (1640 ft) Pressures to 50 bar (725 psi) Temperatures from -18C (0F) to 95C (200F) Speeds to 1800 rpm Features Double-suction, first-stage impeller Double case construction Impellers keyed with lock collars Double volute casing Heavy-duty discharge head Open lineshaft construction Flanged column assembly with bearing retainers Large shaft with keyed lineshaft couplings Mechanically sealed Rigid, adjustable flanged coupling Solid shaft motor with NEMA or IEC thrust bearing Optional suction can drain Related Configurations APKC single-suction design See Bulletin PS-40-10.
43
Pleuger SUBM Deep-Well Submersible (Water-Filled Design)
Byron Jackson SUBM Deep-Well Submersible (Oil-Filled Design)
Vertical Submersible
Standards Flowserve CSA, WIMES 3.03, EMV, KTV, CE, VDE and other certifications Operating Parameters Flows to 6000 m3/h (26 415 gpm) Heads to 800 m (2625 ft) Motor sizes to 5000 kW (6700 hp) Speeds from 200 to 3600 rpm Features Wet-type motors with watertight insulated windings Dynamically balanced impellers Pre-filled motors with food grade additives Heavy-duty, adjustable, self-aligning thrust bearings Friction-welded shafts Non-toxic Class Y winding insulation for potable water services Variable frequency drive and hightemperature options Choice of materials Cast iron Bronze Austenitic stainless steels Duplex stainless steels Reinforced composite Related Configurations Byron Jackson SUBM deep-well submersible (oil-filled design) See Bulletin PS-50-3. Standards Flowserve NSF Standard 61 Certification Certification program accredited by RvA, Dutch Council for Accreditation Operating Parameters Flows to 6000 m3/h (26 415 gpm) Heads to 800 m (2625 ft) Motor sizes to 1650 kW (2200 hp) Speeds from 1000 to 3600 rpm Features Oil-filled motors with self-contained force feed, filtered, cooled oil circulation system Vacuum pressure impregnated (VPI) epoxy, Class F insulation system Double-acting thrust bearing system Dynamically balanced, heavy-duty, high-efficiency impellers Variable frequency drive and hightemperature options Choice of materials Cast iron Bronze Austenitic stainless steels Duplex stainless steels Reinforced composite Choice of seals Mercury seal Double mechanical seal Single, pressurized mechanical seal Related Configurations Pleuger SUBM deep-well submersible (water-filled design) See Bulletin PS-50-3. Standards Flowserve Operating Parameters Flows to 4545 m3/h (20 000 gpm) Heads to 90 m (300 ft) Temperatures to 40C (104F) Discharge sizes from 80 mm (3 in) to 500 mm (20 in) Motor ratings to 224 kW (300 hp) Solids handling to 80 mm (3 in) diameter spherical Features High-efficiency hydraulics EPACT-rated motor Spike-resistant windings Class H insulation system Dynamically balanced shaft and rotor Mounting options Wet-pit Dry-pit Transportable Available Configurations MSX Series 1: sizes from 75 mm (3 in) to 150 mm (6 in) MSX Series 2/3: sizes to 500 mm (20 in) See Bulletin PS-50-2.
44
MVX Solids Handling, Wet-Pit
MFV Solids Handling
MNV Large Capacity, Solids Handling
Vertical Slurry and Solids Handling
Standards Flowserve Operating Parameters Flows to 17 000 m3/h (75 000 gpm) Heads to 40 m (130 ft) Sizes 250 mm (10 in) to 1200 mm (48 in) Drivers to 950 kW (1250 hp) Solids up to 150 mm (6 in) Features Heavy-duty fabricated discharge head designed with fabricated flange and splitter vane Symmetrical bowl with multivolute design Hydraulically balanced design Enclosed non-clog impeller Enclosed lineshaft Splitter vane in the column and discharge head Mechanical seal or soft packing shaft sealing options Hollow or solid shaft motor style 416 stainless steel lineshafts Separate steel soleplate Bronze lineshaft bearings Suction bell Standard suction bell wear rings Optional impeller wear rings See Bulletin PS-40-5.
Standards Flowserve Operating Parameters Flows to 2275 m3/h (10 000 gpm) Heads to 90 m (300 ft) Sizes to 400 mm (16 in)
Standards Flowserve Operating Parameters Flows to 45 500 m3/h (200 000 gpm) Heads to 90 m (300 ft) Sizes to 1800 mm (72 in)
Features Features Variety of nozzle position options Variety of nozzle position options Direct or independent motor mounting Direct or independent motor mounting Minimal shaft deflection Minimal shaft deflection Oversized shaft and reduced overhang Oversized shaft and reduced overhang Hardened chrome steel wear rings Hardened chrome steel wear rings Seal chamber accommodates packing Seal chamber accommodates packing or mechanical seals or mechanical seals Adjustable impeller clearance Adjustable wear ring clearance Shaft sleeve options Shaft sleeve options 316 stainless steel 316 stainless steel Hardened chrome steel Hardened chrome steel Bearing housing features Bearing housing features Ball or tapered roller bearings Tapered roller bearings Integral jacking bolts for wear Integral jacking bolts for wear ring adjustment ring adjustment Accessible lubrication points Accessible lubrication points Available Configurations MF horizontal, end suction MFV vertical with motor on separate floor (shown) MFC vertical with direct connected motor See Bulletin PS-10-3. Available Configurations MN horizontal, end suction MNF vertical, bottom suction, direct connected motor MNZ vertical, bottom suction, motor on separate floor MNC vertical with base elbow, direct connected motor MNV vertical with base elbow, motor on separate floor (shown) See Bulletin PS-10-4.
45
FRBHJC Cantilever Sump
MJ and MJC Hard Metal, Slurry Sump
RJ and RJC Rubber-Lined, Slurry Sump

46
Standards Flowserve Operating Parameters Flows to 2700 m3/h (12 000 gpm) Heads to 100 m (330 ft) Temperatures to 150C (300F) Speeds to 1780 rpm Features True stiff shaft cantilever design, without bottom bearing or flushing water Steep head capacity Semi-open, full vane impeller with back pump-out vanes Direct-coupled or V-belt driven Extra heavy-duty alloy steel shaft Related Configurations FRBH heavy-duty paper stock and process FRBHJ vertical lineshaft sump See Bulletin PS-10-16.
Standards Flowserve Operating Parameters Flows to 225 m3/h (1000 gpm) Heads to 30 m (100 ft) Pressures to 10 bar (150 psi) Temperatures to 110C (225F) Solids from 2% to 70% by weight Speeds to 1780 rpm Features Abrasion- and corrosion-resistant high chrome iron concentric casing Integrally cast straightening vanes in the suction nozzle Closed impeller with pump-out vanes on front and rear shrouds MJ has fluted cutlass rubber bearings MJC has restriction bushing Directly coupled or V-belt driven Options Hard metal expeller Open and recessed impellers Choice of materials Available Configurations MJ submerged bearing and lineshaft design MJC cantilever design M horizontal, hard metal, abrasive slurry See Bulletin PS-10-19.
Standards Flowserve Operating Parameters Flows to 225 m3/h (1000 gpm) Heads to 30 m (100 ft) Pressures to 10 bar (150 psi) Temperatures to 110C (225F), depending on material Solids from 2% to 70% by weight Speeds to 1780 rpm Features Radially split casing with antiprerotation vanes in suction nozzle Casing liners pressure molded on steel backing plates; multiple materials available Rubber, pressure-molded closed impeller with pump-out vanes on front and rear shrouds RJ has fluted cutlass rubber bearings RJC has restriction bushing Directly coupled or V-belt driven Options Hard metal expeller Choice of liner materials Available Configurations RJ submerged bearing and lineshaft design RJC cantilever design R horizontally split, rubber lined, slurry See Bulletin PS-10-18.
Terra-Titan Cantilever Sump
Drain-Titan Urethane-Lined, Double-Suction Sump
Standards Flowserve Operating Parameters Flows to 250 m3/h (1100 gpm) Heads to 45 m (150 ft) Pressures to 5 bar (70 psi) Temperatures to 100C (212F) Sizes from 40 mm (1.5 in) to 125 mm (5 in) Sump depths from 700 mm (28 in) to 1800 mm (72 in) Features One-piece suspended, oversized cantilever shaft construction Interchangeable urethane or hard metal wetted parts Concentric casing design Double-suction, hydraulically balanced open impeller External impeller adjustment Renewable Terraprene urethane shaft sleeve Greased-for-life, heavy-duty, self-aligning roller bearings Upper and lower strainers Run-dry capability ANSI and ISO configurations Portable Lifting lugs Rigid motor mount pivot bar Available bottom suction tailpipe Multiple drive options See Bulletin PS-10-7.
Standards Flowserve Operating Parameters Flows to 4545 m3/h (20 000 gpm) Heads to 90 m (300 ft) Temperatures to 40C (104F) Discharge sizes from 80 mm (3 in) to 500 mm (20 in) Motor ratings to 224 kW (300 hp) Solids handling to 80 mm (3 in) diameter spherical Features High-efficiency hydraulics EPACT-rated motor Spike-resistant windings Class H insulation system Dynamically balanced shaft and rotor Mounting options Wet-pit Dry-pit Transportable Available Configurations MSX Series 1: sizes from 75 mm (3 in) to 150 mm (6 in) MSX Series 2/3: sizes to 500 mm (20 in) See Bulletin PS-50-2.
Standards Flowserve Operating Parameters Flows to 160 m3/h (700 gpm) Heads to 40 m (130 ft) Pressures to 4 bar (55 psi) Sizes from 40 mm (1.5 in) to 100 mm (4 in) Solids to 15 mm (0.6 in) Features Double-suction, urethane-coated, wet end Robust, integral unit construction Large diameter, stiff cantilever drive shaft No submerged bearings or seals Double-sided impeller with pre-set clearance Keyed and bored shaft coupling Standard single lip oil seal Urethane-lined, slotted outlet pipe flange Grease-lubricated, single row, deep groove ball bearings No priming required Run-dry capability See Bulletin PS-10-7.
47
CPXV Chemical Sump
ESP3 Chemical Sump
PolyChem VGRP Engineered Polymer Composite Sump
Vertical Sump
Standards ISO 13709/API 610, 8th & 10th ed. ISO 5199 Operating Parameters Flows to 1400 m3/h (6160 gpm) Heads to 250 m (820 ft) Pressures to 25 bar (365 psi) Temperatures from -40C (-40F) to 350C (660F) Features Heavy-duty casing with multi-ribbed discharge flange High-efficiency, semi-open impeller Column lengths to 10 m (32 ft) Heavy-duty thrust bearings with axial adjustment above soleplate level Accepts multiple seal arrangements Elastomeric split element coupling Options Recessed impeller Suction strainer Spacer coupling Rectangular or circular soleplate Oil lubrication to thrust bearing Zone hazardous area beneath soleplate configuration CE marked and compliant with applicable European directives such as ATEX; available with GOST certification Other Configurations CPXVR recessed impeller, chemical sump Fully jacketed, molten salt design Standards Flowserve Operating Parameters Flows to 1300 m3/h (5700 gpm) Heads to 90 m (300 ft) Pressures to 12 bar (175 psi) Temperatures to 180C (350F) Features Optimized lineshaft bearing design to ISO 13709/API 610 spacing requirements Double row external thrust bearings Single and duplex configurations Flanged discharge Large basket strainer Industry standard TCV motors Lubrication options Product lube for clear liquids Dual particle separator for light solids Grease lubrication Mounting plate sealing options Vapor-tight Vapor-proof Pressurized design Options Upper stuffing box Sealing ring Suction tailpipes Level controls Related Configurations ESP3 Lo-Flo ESP3 recessed impeller ESP3 high chrome iron See Bulletin PS-10-24. Standards Flowserve Operating Parameters Flows to 565 m3/h (2500 gpm) Heads to 110 m (350 ft) Pressures to 17 bar (250 psi) Temperatures from -30C (-20F) to 90C (200F) Features Glass-reinforced vinyl ester Unitized casing with integrally molded, fully gusseted suction and discharge flanges Externally adjustable, semiopen impeller Shaft and bearing system operates well below the first critical speed Self-lubricated or external flush bearings Single-piece, lightweight, filamentwound, reinforced fiberglass composite column Single and duplex configurations Full basket strainer NEMA in-line motor Fiberglass mounting plate Tapered polygon impeller drive Pullout bearing retainers Level controls Choice of shaft metallurgy Related Configurations PolyChem GRP engineered polymer composite See Bulletin PS-10-17.
48
Drain-Titan Urethane-Lined, Double-Suction Sump
VSMP Vertical Standard Motor
ECPJ (VS4) Sump
Vertical Sump
Standards Flowserve Operating Parameters Flows to 160 m3/h (700 gpm) Heads to 40 m (130 ft) Pressures to 4 bar (55 psi) Sizes from 40 mm (1.5 in) to 100 mm (4 in) Solids to 15 mm (0.6 in) Features Double-suction, urethane-coated wet end Robust, integral unit construction Large diameter, stiff cantilever drive shaft No submerged bearings or seals Double-sided impeller with pre-set clearance Keyed and bored shaft coupling Standard single lip oil seal Urethane-lined, slotted outlet pipe flange Grease-lubricated, single row, deep groove ball bearings No priming required Run-dry capability See Bulletin PS-10-7.
Standards Flowserve Operating Parameters Flows to 135 m3/h (600 gpm) Heads to 70 m (220 ft) Pressures to 12 bar (175 psi) Temperatures from -40C (-40F) to 120C (250F) Features Glass-reinforced polymer, highefficiency, semi-open or closed impellers standard Industry standard NEMA motors Stainless steel, self-aligned mechanical seal Back pullout design Clamp-type mounting plate Options Cast iron, bronze or 316 stainless steel impellers Stub shaft design Related Configurations SMP standard motor pump SMX non-metallic standard motor pump See Bulletin PS-10-26.
Standards ISO 13709/API 610 (VS4), latest ed. Operating Parameters Flows to 1000 m3/h (4400 gpm) Heads to 150 m (500 ft) Pressures to 20 bar (285 psi) Temperatures to 350C (660F) 45 sizes available Features Lineshaft configuration Four impeller designs Closed multivane impeller with front wear rings and back vanes Closed multivane impeller with front and rear wear rings Open multivane impeller with back vanes Free flow impeller with back vanes Multiple shaft sealing options V-ring Throttle bushing Lip seal with grease-filled stuffing box Soft packing ISO 21049/API 682 seal chamber accommodates multiple seal types Column lengths to 6 m (22 ft); suction pipe available Choice of ISO/API materials NACE MR0175 materials available Internal or external bearing flushing Bearing cooling Suction strainer See Bulletin PS-10-10.
49
Gear GR Series GA Series Gearex Screw TSP MP1 MP1 Systems Packaging Reciprocating YHT HS VTE VQE V VSE 52 52 52
53 53 53 54 54 54 54 54 54
51
GR Series Double Helical, Gear
GA Series Double Helical, Gear
Gearex Double Helical, Timed Gear
Positive Displacement Gear Overhung General Industry

52
Standards Flowserve Operating Parameters Flows to 275 m3/h (1200 gpm) Pressures to 35 bar (500 psi) Temperatures to 350C (650F) Speeds to 1800 rpm Viscosities to 20 000 cP Features Double helical, herringbone gears Quiet, pulse-free flow High-speed pump capability Between bearings design Hydraulically balanced design Stuffing box accommodates packing or mechanical seals High-capacity, double row roller bearing Self-priming Run-dry capability Low NPSHR Back pullout design Options Mechanical seal Direct V-belt drive Extra deep jacketed stuffing box Jacketed body Babbitted carbon sleeve bushing INSUROCK wearplates Integral safety relief valve Available Configurations GR standard gear width GRW wide gears for high flows GRH narrow gears for high pressures See Bulletin PS-60-4.
INSUROCK is a registered trademark of Richardson Company, Inc.
Standards Flowserve Operating Parameters Flows to 27 m3/h (120 gpm) Pressures to 17 bar (250 psi) Temperatures to 175C (350F) Speeds to 1800 rpm Viscosities to 5000 cP Features Double helical, herringbone gears Quiet, pulse-free flow High-speed pump capability with off-the-shelf motors Between bearings design Self-lubricated babbitted carbon sleeve bearings standard; bronze bearings optional Hydraulically balanced design requires no thrust bearings Convertible stuffing box accommodates packing or mechanical seals Threaded ports Back pullout design Available integral safety relief valve Multiple mounting configurations Related Configurations GAS foot mounting (standard) GAF flange mounting GAC close coupled GSX series stainless steel, double helical, rotary gear pumps See Bulletin PS-60-4.
Standards Flowserve Operating Parameters Flows to 180 m3/h (800 gpm) Pressures to 20 bar (300 psi) Temperatures from -50C (-60F) to 450C (842F) Viscosities to 20 000 cP Features Double helical, herringbone gears Quiet, pulse-free flow External timing gears Between bearings design Heavy-duty, double row roller bearings Direct coupled Options Water-cooled bearings Steam- or water-jacketed bodies Vertical mounting configuration Mechanical seals Lantern rings Shaft slingers Split bearing brackets Flange mounting brackets Jackshafts for V-belt drives See Bulletin PS-60-4.
TSP Double-Suction, Twin-Screw
MP1 Multiphase Twin-Screw
MP1 Systems Packaging
Overhung General Industry Positive Displacement Screw
Standards API 676, latest ed. Operating Parameters Flows to 2550 m3/h (11 200 gpm) Pressures to 100 bar (1450 psi) Temperatures to 450C (842F) Speeds to 1800 rpm Viscosities to 55 million cP Slurry concentrations to 70% by weight Features Positive displacement timed two-screw Double-suction design Split bearing bracket for ease of maintenance Versatile ISO 21049/API 682 compliant stuffing box design Integral or pinned screw elements Spur-tooth timing gears Chrome-plated pump bores Options Fully external bearings and timing gears Internal bearings and timing gears Temperature control packages Hopper-top construction Vertical barge configuration Choice of materials Multiple hard coatings for bores and screws See Bulletin PS-60-1.
Standards API 676, latest ed. Operating Parameters Flows to 1990 m3/h (8750 gpm) Pressures to 50 bar (720 psi) Temperatures to 450C (842F) Speeds to 2000 rpm Viscosities to 8000 cP Multiphase pumping to 100% GVF (gas volume fractions) Features Non-contacting design with one-piece pump shafts Three pumping locks for low pulsation flow Through-bolt bearing bracket design ISO 21049/API 682 seal chamber with split brackets accommodates single and double cartridge seals Double-suction design with low NPSH capability AGMA 11 helical timing gears Chrome-plated bores and hard-coated screws Options Multiple hard coatings for bores and screws Choice of materials, including NACE Customized pitch Customized packaging Variable speed drive Natural gas or diesel engine drive Other Configurations High pressure: 100 bar (1450 psi) See Bulletin PS-60-2.
Standards Flowserve ASME Features Standard or custom engineered system packaging available Driver options Electric motor Electric motor with variable speed drive (VSD) Diesel or natural gas engine Complete piping systems Suction, discharge, bypass and recycle piping Block, control and check valves Filters and strainers Pressure, temperature and flow instrumentation Complete, integrated control systems PLC-based Controls for pump, valves, instrumentation and alarms, VSD, etc. Motor control center Single and multiple skid options for integration of controls, pump and piping Special enclosures for arcticlike conditions or other harsh environments
53
YHT and HS Horizontal Reciprocating
VTE , VQE, V and VSE Vertical Reciprocating
Positive Displacement Reciprocating Overhung General Industry

54
Standards API 674, latest ed. ASME section III Operating Parameters 75 mm (3 in) to 250 mm (10 in) stroke Flows to 775 m3/h (3400 gpm) Standard pressures to 555 bar (8030 psi); custom pressures to 2070 bar (30 000 psi) Temperatures from -40C (-40F) to 350C (650F) Power to 2560 kW (3430 hp) Speeds to 530 rpm Features Self-aligning plungers Sectionalized fluid end components Fully enclosed power end with generous oil reservoir Independent crosshead extension rod Integrally cast and precision-machined cylindrical crosshead guides Triple lip seal at crosshead extensions Fully reversible crankshaft for V-belt drive or direct coupling Stuffing box assemblies individually bolted to fluid cylinder Splash-type or full-pressure lubrication system Threaded primary drain Options Overhead motor mounting Spring-loaded stuffing box Discharge pulsation dampeners See Bulletin PS-70-1
Standards API 674, latest ed. ASME section III Operating Parameters 140 mm (5.5 in) to 225 mm (9 in) stroke Flows to 1140 m3/h (5000 gpm) Standard pressures to 619 bar (8975 psi); custom pressures to 2070 bar (30 000 psi) Temperatures from -40C (-40F) to 350C (650F) Power to 3450 kW (4625 hp) Speeds to 360 rpm Features Outboard packed inverted design Easily accessible stuffing box Integrated suction and discharge manifold Complete separation of liquid end from power end Valve design suitable for conditions of service Spherical feature for plunger alignment Power-end maintenance inspection covers Forced feed lubrication Options Spring-loaded packing Pulsation dampeners Sectionalized fluid ends See Bulletin PS-70-1
Overhung General Industry
55
Specialty Products
Nuclear Pumps and Seals DFSS DVSS N-Seal WDF DVSR CN HDR CA CAM CAV EG MEV Extreme Temperature WUC-LNG Cryogenic VKW Cryogenic TKW Cryogenic Byron Jackson SUBM Geothermal Others Hydraulic Decoking Systems IPS Products Pleuger WFSD Azimuthing Thruster DWEER ERT CVP Barge Pump Molten Salt VTP 58 58 58 58 59 59 59 60 60 60 61 61 62 62 62 62
Specialty Products
63 63 64 64 64 65 65 65
57
DFSS and DVSS Nuclear Radially Split, Single-Stage
N-Seal Nuclear Mechanical Seals
WDF Nuclear Vertical, Single-Stage
Specialty General Nuclear Overhung Products Industry Pumps and Seals

58
Standards ASME Section III, Class 1 Operating Parameters Flows to 24 500 m3/h (108 000 gpm) Heads to 250 m (820 ft) Pressures to 170 bar (2500 psi) Temperatures to 300C (580F) Speeds to 1800 rpm Power rating to 9400 kW (12 600 hp) Services Primary coolant Reactor recirculation Primary heat transport Features Fourth generation design One-piece cast pump casing Double volute design case for BWR and PHWR Diffuser with torus-type design casing for PWR Upgraded rotating element One-piece welded shaft-impellerjournal assembly Fully machined and balanced as single rotating unit Hydrostatic-pressurized radial bearing Operates submerged in radioactive system water at loop temperature of approximately 300C (580F) See Bulletin FPD-2.
Standards ASME Section III, Class 1 Operating Parameters Pressures to 150 bar (2175 psi) Temperatures to 80C (180F) Speeds to 1800 rpm Services Primary coolant Reactor recirculation Primary heat transport Features Controlled leakage seal design Design life of five years or 50 000 hours Reduced man-rem exposure Unique one- or two-piece cartridge construction Two-, three- and four-stage configurations Assured redundancy with each stage able to handle full system pressure Interchangeable stage components Hydrodynamic seal face technology Three different seal face lift designs available Multiple seal face materials available Provisions for monitoring pressure, temperature and flow at each stage Internal screens for trapping particles Seal faces are supported by gaskets to minimize pressure points and deflection See Bulletin PS-80-2.
Standards ASME Section III, Class 2 and 3 Operating Parameters Flows to 900 m3/h (4000 gpm) Heads to 245 m (800 ft) Services Containment spray Low-pressure safety injection Residual heat removal Features Vertical, single-stage design Bottom suction, horizontal discharge Forged diffuser casing design Optimized hydraulic performance Unique spacer coupling design Mechanical seal replacement without motor or casing cover removal Upgraded rotor design Radial bearing located between coupling and seal Reduced shaft deflection Improved pump and mechanical seal life and reliability Cartridge mechanical seal Reduced assembly time See Bulletin FPD-2.
DVSR Nuclear Radially Split, Volute Casing, Single-Stage
CN Nuclear Radially Split, Diffuser Casing, Single-Stage
HDR Nuclear Radially Split, Volute Casing, Single-Stage
Standards ASME Section VIII Operating Parameters Flows to 4535 m3/h (19 945 gpm) Heads to 800 m (2625 ft) Pressures to 100 bar (1470 psi) Temperatures to 210C (410F) Power to 8000 kW (10 700 hp) Speeds to 6000 rpm Services Reactor and steam generator feedwater Features Cast volute casing configuration Double cover design High-speed pump design Double-suction impeller Centerline mounted Pressure breakdown bushing or mechanical seal Sleeve radial and tilting pad thrust bearings standard See Bulletin FPD-2.
Standards ASME Section VIII Operating Parameters Flows to 5065 m3/h (22 300 gpm) Heads to 800 m (2625 ft) Pressures to 100 bar (1470 psi) Temperatures to 210C (410F) Power to 11 200 kW (15 000 hp) Speeds to 6000 rpm Services Reactor and steam generator feedwater Features Diffuser casing configuration Forged barrel High-speed pump design Double-suction impeller Special impeller designs for low NPSHA conditions Centerline mounted Pressure breakdown bushing or mechanical seal Sleeve radial and tilting pad thrust bearings standard See Bulletin PS-80-4.
Standards ASME Section VIII Operating Parameters Flows to 5065 m3/h (22 300 gpm) Heads to 800 m (2625 ft) Pressures to 100 bar (1470 psi) Temperatures to 210C (410F) Power to 11 200 kW (15 000 hp) Speeds to 6000 rpm Services Reactor and steam generator feedwater Features Volute casing configuration Forged barrel High-speed pump design Double-suction impeller Special impeller designs for low NPSHA conditions Centerline mounted Pressure breakdown bushing or mechanical seal Sleeve radial and tilting pad thrust bearings standard
59
CA Nuclear Diffuser Casing, Multistage, Utility Barrel
CAM Nuclear Diffuser Casing, Multistage, Utility Barrel
CAV Nuclear Vertical, Double Case, Multistage

60
Standards ASME Section III, Class 2 and 3 Operating Parameters Flows to 5250 m3/h (23 000 gpm) Discharge pressures to 450 bar (6500 psi) Temperatures to 250C (480F) Speeds to 6000 rpm Services Safety injection Features Internal casing with segmented stage elements Diffuser guide-vane construction Precision cast in-line impellers Heavy-duty forged barrel with forged steel discharge cover Balance drum and sleeve, made from hardened stainless forgings Ball thrust and ball radial bearings Fan-cooled bearing housings Renewable casing rings and sleeves Ground forged steel shafting Cartridge seals See Bulletin FPD-2.
Standards ASME Section III, Class 2 and 3 Operating Parameters Flows to 45 m3/h (200 gpm) Heads to 1920 m (6300 ft) Pressures to 235 bar (3410 psi) Temperatures to 120C (250F) Services CVCS charge Control rod drive Features Multistage, double case design Unique, compact design Modular impellers Low-flow stability and reliability over a wide range of flows No surging or pulsations Ball-ball construction Dry disk spacer coupling Flanged axial thrust balancing device Modularized assembly and disassembly may be conducted without the use of a torch Forged barrel with no attachment welds Cartridge mechanical seals with no attachment welds No auxiliary cooling required See Bulletin FPD-2.
Standards ASME Section III, Class 2 and 3 Operating Parameters Flows to 60 m3/h (265 gpm) Heads to 2000 m (6560 ft) Pressures to 235 bar (3410 psi) Temperatures to 100C (212F) Speeds to 3600 rpm Services CVCS charge Features Multistage, double case design Barrel-rated at full discharge pressure Suction and discharge connections at bottom of barrel Diffuser design with back-to-back impeller mounting to minimize thrust Cartridge mechanical seal Thrust bearings provided in either pump or motor as required Spacer coupling See Bulletin FPD-2.
EG Nuclear Radially Split, Double-Suction
MEV Nuclear Vertical, Single-Stage
Standards ASME Section III, Class 3 Operating Parameters Flows to 4000 m3/h (17 610 gpm) Heads to 60 m (200 ft) Pressures to 14 bar (200 psi) Temperatures to 80C (180F) Power to 950 kW (1275 hp) Speeds to 3600 rpm Services Component cooling water Features Cast volute casing Double cover design Double-suction impeller Centerline mounting Side suction and side discharge located above the mounting feet Cartridge mechanical seal 360 bearing housings Ball radial and ball thrust bearings See Bulletin FPD-2.
Standards ASME Section III, Class 3 Operating Parameters Flows to 5400 m3/h (23 760 gpm) Heads to 50 m (160 ft) Pressures to 14 bar (200 psi) Temperatures to 80C (180F) Speeds to 3600 rpm Services Essential and non-essential service water Features Cast casing and cover Bottom suction, horizontal discharge configuration Single-stage, enclosed impeller Fabricated motor stand Cartridge mechanical seal Radial roller and double ball thrust bearings Grease-lubricated bearings See Bulletin FPD-2.
61
WUC-LNG Cryogenic (VS6) VKW and TKW Cryogenic Liquid Expander (VS6) Vertical, Double Case, Double Case, Multistage, Multistage Electric Generator
Byron Jackson SUBM Geothermal Deep-Well Submersible
Specialty General Extreme Overhung Products Industry Temperature Pumps

62
Standards ISO 13709/API 610 (VS6), latest edition ASME Sections VIII and IX German Pressure Vessel Association (AD) British Standard BS 5500 Compliance with Pressure Equipment Directive 97/23/EC Operating Parameters Flows to 3000 m3/h (13 000 gpm) Heads to 1200 m (3900 ft) Pressures to 200 bar (3000 psi) Temperatures from -200C (-328F) to -45C (-50F) Features Coffer dam system Radial or mixed flow hydraulics Low suction velocity can design Optional axial thrust tilting pad bearing configuration Stiff shaft design ISO 21049/API 682 compliant mechanical seal chamber Flanged spacer coupling Screen-type, non-sparking coupling guard Inside drain line Casing and impeller wear rings Reinforced motor stand Optional inducer Related Configurations WUC (VS6) double case, multistage See Bulletin PSS-40-9.1.
Standards ISO 13709/API 610 (VS6), latest edition ASME Sections VIII and IX Operating Parameters Expander flows to 2500 m3/h (11 000 gpm) Inlet pressures to 70 bar (1000 psi) Temperatures to -180C (-290F) Power to 3 MW (4000 hp) Runaway speed to 5400 rpm Features Variable or fixed geometry Externally driven remote and local controlled variable wickets Optimal isentropic efficiency Overall improvement of compressor power efficiency Air-cooled generator Temperature reduction through liquid expansion Additional electric generation Low vibration Low noise level State-of-the-art gas seal Optimum specific speed selection Available Configurations TWK variable geometry, double case, multistage, electric generator VKW fixed geometry, double case, multistage, electric generator See Bulletin PSS-90-7.1.
Standards IEC/VDE and other certifications Operating Parameters Flows to 720 m3/h (3170 gpm) Heads to 800 m (2625 ft) Temperatures to 160C (320F) Motor sizes to 1500 kW (2000 hp) Speeds from 2900 to 3500 rpm Inner well diameters from 340 mm (13-3/8 in) to 508 mm (20 in) Features Pump and motor design for geothermal application Oil-filled motor with self-contained force feed, filtered, cooled oil circulation system Vacuum pressure impregnated (VPI) epoxy, Class F insulation system Class C winding insulation system Double cable plug construction Double-acting thrust bearing system Dynamically balanced heavy-duty, high-efficiency impellers Optional variable frequency Choice of materials Double mechanical seal Motor design with breather diaphragm for pressure compensation Non-return design for high pressure Downhole monitoring system Other Configurations Byron Jackson SUBM deep-well submersible (oil-filled design)
Hydraulic Decoking Systems
IPS Equipment Monitoring and Control Products
Specialty General Others Overhung Products Industry
Flowserve Automated Hydraulic Decoking Systems Increase delayed coking unit (DCU) capacity and improve operator safety Installed in more than 95% of the worlds DCUs Complete systems with virtually all equipment needed to operate and control the hydraulic decoking process Extensive aftermarket support including specialists to evaluate system performance, improve reliability, and recommend operational and safety best practices
Provides greater system automation and improved efficiency while improving operator safety, reducing cycle time and easing maintenance Mode shifting helps to free impeded tools from slumped beds
Advanced Cutting Control Complete systems and enclosures to monitor and control the operations Continuous feedback signals indicate equipment and drum status (i.e., position in drum, rotational speed, wore rope tension, etc.) Embedded intelligence to process Complete Coke Cutting Systems data for monitoring and control; Jet pump train: ISO 13709/API 610 operator interface only required (BB5) jet pump, driver, lube oil skid for sequence exception and control system panel Video and acoustic equipment to Coke cutting system: decoking monitor cutting deck operations and control valve, AutoShift combination coke chute conditions cutting tool, rotary joint, isolation and Remote winch and rotary joint bleed valves, drill stem, tool guide and operation enclosure and high-pressure hose Remote sensing of cutting jet Cutting assembly lifting system: impingement on the coke drum crosshead, free-fall arresters, winches Interlocking safety systems and winch controls, pulley blocks, IPS APEX data monitoring, and latch mechanism to stow transmission and control systems the crosshead Online Assurance Programs Automation, controls and Access to data aggregation tools via instrumentation the Technology Advantage Portal Enable experts to monitor, diagnose AutoShift Combination Cutting Tool and communicate operating Removes the operator from the solutions to increase unit uptime cutting deck Mode shifting is accomplished See Bulletin PS-90-6. automatically and remotely by water pressurization and depressurization
Intelligent Process Solutions (IPS) Family of equipment monitoring and control products that helps to proactively manage plant assets Collect key system parameters Analyze and synthesize data into actionable information Protect process equipment via automated responses Transmit information to enable a timely manual response Increase uptime Reduce operating costs IPS Wireless Cost-effective and scalable data acquisition system Open platform architecture Omni-directional technology IPS APEX Advanced diagnostics Intelligent control algorithms protect against high-risk process conditions IPS Tempo Variable frequency drive Intelligent system optimization IPS Power Monitor Monitors actual power usage Programmable start-up delay and low and high trip points See Bulletin PS-90-11.
63
Pleuger WFSD Azimuthing Thruster
DWEER Dual Work Exchange Energy Recovery

TM
ERT Energy Recovery Turbine

64
Standards Flowserve Applications Semi-submersible drilling rigs Floating production, storage and offloading vessels Drill ships Crane vessels and pipelay vessels Features Up to 5 m (16.5 ft) propeller diameter Up to 4500 kW (6000 hp) input 4- or 5-blade fixed pitch propeller 7 tilted propeller shaft Propulsion and steering with thrust in any direction Minimal thruster-hull and thruster-thruster interaction for higher net thruster output Mounting and dismantling underwater without dry-docking Customization to meet specific application needs Duplex thrust bearing allows windmilling at any speed Automatic pressure compensation system adapts differential pressure to draft Fully flooded gear housing provides optimum lubrication Easy underwater mounting; secured during installation by hydraulically operated locking mechanism Fully redundant closed-loop hydraulic steering system as standard See Bulletin PSS-90-8.1.
Standards Flowserve Operating Parameters Brine flows to 350 m3/h (1.4 MGD); greater flows can be achieved by placing multiple DWEER units in parallel Pressures to 75 bar (1090 ft) Features Highest efficiency energy recovery device available Noise levels below 83 dBa Self-adjustable to changing operating conditions Super duplex stainless steel or fiber-reinforced plastic pressure vessel No leakage lubrication required LinX valve regulates flow into vessels Proven long-term reliability Capable of passing solids (no additional strainers required) System responsibility with integrated controls Slow operating speed Smooth increase and decrease of system pressure during startup and shutdown See Bulletin FPD-18.
Standards Flowserve Operating Parameters Brine flow to 1200 m3/h (5280 gpm) Pressures to 80 bar (2715 ft) Efficiency up to 90% Power to 1500 kW (2025 hp) Special designs available on request Features Specially designed for sea water reverse osmosis (SWRO) applications Standardized product line Wetted parts in super duplex stainless steel and non-metallics Proven long-term reliability with more than 25 years of operating experience Simple plant integration and control Horizontal split casing External standard bearings Labyrinth double seals Flat operating curve over typical RO performance range No mixing, overflush or leakage See Bulletin FPD-18.
CVP Vertical, Concrete Volute
Barge Pump
Molten Salt VTP
Standards Flowserve Hydraulic Institute Operating Parameters Flows to 115 000 m3/h (500 000 gpm) Heads to 45 m (147 ft) Features Vertical dry-pit design Removable metallic pump pullout unit within a concrete volute Suction bell connected to preformed high-efficiency, vortex-free concrete suction box Open mixed flow and closed mixed flow impeller options Dry shaft design No submerged bearings Bearings and sealing systems easily accessible Prefabricated concrete segments Highly corrosion and erosion resistant Liquidyne or mechanical shaft seal Inflatable static seal Engineered to customer specifications Available Configurations BSV open mixed flow impeller design BCV closed mixed flow impeller design See Bulletin PS-40-1.
Liquidyne is a registered trademark of IHC.
Standards Flowserve Operating Parameters Flows to 1020 m3/h (4500 gpm) Heads to 185 m (600 ft) Pressures to 8.6 bar (125 psi) Temperatures from -30C (-20F) to 230C (450F) Discharge flanges to 250 mm (10 in) Features Pollution prevention design Discharge head with access ports Rabbeted-fit motor shaft to headshaft 1.5 m (5 ft) column pieces with integrally fabricated bearing support Automatic stuffing box bleed-off and valved drain line Special low NPSH priming stage impeller Semi-open series stage impeller Automatic air separation chamber with continuous seal See Bulletin PSS-40-7.2.
Standards Flowserve Operating Parameters Flows to 13 600 m3/h (60 000 gpm) Heads to 530 m (1740 ft) Pressures to 100 bar (1450 psi) Temperatures to 600C (1100F) Settings to 20 m (65 ft) Features Low pump submergence allows for greater energy generation Low NPSHR for enhanced suction performance Excellent heat dissipation prevents distortion at high temperatures Advanced fluid sealing system Materials engineered to equalize thermal growth and forestall distortion Wet-pit or tank-mounted Dynamically balanced enclosed impellers Flanged column pipe with open lineshaft construction Product lubricated bearings Cooling fan/disc Drain tubes Other options Integral axial thrust bearing Thrust-balanced impeller Coupling bellows ISO 13709/API 610 construction Related Configurations FRBHJC cantilever sump CPXV chemical sump See Bulletin FPD-16.
65
Services and Solutions Other Flowserve Products Reference Sources 68 70 71
67
Services and Solutions for the Global Infrastructure Markets

The business and operational challenges within a process plant are numerous. Plant operators face the pressures of increased productivity and profits that are seemingly at odds with the everyday realities of decreased operating budgets, rising energy costs and increasing operational costs. But Flowserve Services and Solutions can help relieve the stresses and reduce the life cycle costs associated with the most important aspects of plant operation. Dedicated to delivering the highest quality support, Flowserve Services and Solutions integrates hydraulic, mechanical, and materials engineering knowledge with creative operating and business solutions to: Improve equipment reliability and performance Reduce energy consumption Manage inventories Maintain flow management equipment
90%
Operating Cost
Integrated Solutions That Support the Complete Life Cycle

Typically, 90% of the total life cycle cost (LCC) of a flow management system is accumulated after the equipment is purchased and installed. Flowserve offers a comprehensive suite of services and solutions designed to provide customers with unprecedented value and cost savings throughout the life span of the system. Asset Management and Optimization Engineering and Technical Services Education and Training Aftermarket Parts and Services
68
flowserve.com
Asset Management and Optimization

Flowserve has developed the human resources, technology platforms and business alliances to help customers realize more payback from their plant assets. Business Assessments Flowserve business consultants can benchmark operational performance, define the key metrics and implement the necessary steps to achieve specific goals. Asset Data Management By employing sophisticated tools and technologies to collect, examine and understand data, Flowserve enables customers to reveal hidden opportunities for asset improvement. Asset Optimization Solutions Flowserve offers a suite of performance-based contract services to address the key business and operational challenges of plant managers.
Education and Training

Flowserve offers a wide range of innovative programs to help plant operators, reliability specialists, engineers and maintenance personnel deepen their understanding of process systems. Customer Site Flowserve can design, develop, and deliver training programs tailored specifically around the people, equipment and processes at a customers facility. Learning Resource Center At its state-of-the-art Learning Resource Centers, Flowserve provides hands-on training and instruction in the principles of equipment operation, maintenance and reliability. Online Flowserve offers Web-based modules with online testing and data tracking to ensure comprehension of the most important principles.
Engineering and Technical Services

With unrivaled engineering and technical resources in more than 55 countries, Flowserve delivers value-added solutions that improve operational performance and increase revenues for its customers. Engineering Support Flowserve engineers can engage remotely or on-site to support grassroots project planning, system design or project management requirements. Technical Assessments Flowserve can perform comprehensive system audits to identify operational issues that may be constraining output or elevating operating costs and propose solutions based upon life cycle cost (LCC) calculations. Equipment Performance Improvements Flowserve routinely implements LCC-justified solutions to improve equipment performance, system throughput and unit profitability.
Aftermarket Parts and Services

Investments in well-equipped Quick Response Centers, mobile service fleets, and advanced manufacturing technologies along with the unrivaled expertise of its engineers, technicians and craftsmen enable Flowserve to address virtually every service requirement for process equipment, on- or off-site, regardless of OEM. Repair and Maintenance From machining to mechanical upgrades to on-site management, Flowserve repair and maintenance services focus on improving equipment performance while reducing downtime and costs. Replacement Parts and Components Through quick response programs, rapid prototyping, and other innovative approaches, Flowserve can supply customers with the quality parts needed to keep operations running smoothly and profitably.
69
Providing Complete Fluid Motion Control Equipment and Services
Other Flowserve Products

Flowserve has the systems, products, and experience to help processes run smarter, safer and more efficiently. In addition to its extensive pump product line, Flowserve offers high-quality seals and valves.
Flowserve Valves
With the industrys most complete range of valves, actuators, positioners, controls, switches and steam systems, Flowserve provides customers a one-stop solution for their flow control needs. With comprehensive research and development, engineering and global support, Flowserve offers valve applications solutions from simple isolation service to intelligent process control. To learn more about Flowserve valves and seals, visit www.flowserve.com.
Flowserve Seals
Flowserve manufactures and markets highly engineered mechanical shaft seals for containing corrosive, volatile, abrasive, precious or flammable fluid. They are used on pumps and other rotating equipment. The complete seal line includes cartridge, dry-running, metal or elastomer bellows, split and zero-emission gas barrier seals. Offering innovative seal design and service on demand, Flowserve is committed to the development of new technologies to further reduce maintenance and operating costs for its customers.
70
flowserve.com
Reference Sources
FlowSelex Interactive Pump Selection Application
FlowSelex is a Web-based interactive pump selection program that allows users to access an extensive database of Flowserve pump sizing information anytime, anywhere. This versatile tool delivers a wide range of information, from pump descriptions and operating parameters to custom application package specifications with supporting technical documentation, including: Performance curves Hydraulic data sheets General arrangement drawings Construction data sheets FlowSelex can be accessed at www.Flowserve.com/FlowSelex.
Cameron Hydraulic Data

First published in 1926 and now in its 19th edition, the Cameron Hydraulic Data book is an indispensable aid to engineers involved with the specification, selection and application of pumping equipment. This comprehensive reference tool includes: Hydraulic principles and formulae Friction data Properties of common liquids Steam and electrical data Weights, dimensions, and ratings of pipe flanges and fittings Metric conversions To obtain a copy of the Cameron Hydraulic Data book, visit: www.cameronbook.com.
Pump Engineering Manual

This publication is devoted to explaining centrifugal pump principles. It covers the basics, from application analysis and affinity laws through hydraulics and mechanical phenomena to troubleshooting. To obtain a copy of the Pump Engineering Manual, visit: www.cameronbook.com.
71
Index
A
AFV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 APKC (see APKD) . . . . . . . . . . . . . . . . . . . . . . 43 APKD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
E
EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ECPJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 EG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 ERPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 ERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 ESP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
L
LC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 LLR (see LR) . . . . . . . . . . . . . . . . . . . . . . . . . . 28 LNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 LPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 LR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 LRV (see LR) . . . . . . . . . . . . . . . . . . . . . . . . . . 28
B
Barge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 BCV (see CVP) . . . . . . . . . . . . . . . . . . . . . . 41, 64 BP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 BSV (see CVP) . . . . . . . . . . . . . . . . . . . . . . 41, 64 Byron Jackson SUBM (Geothermal) . . . . . . 62 Byron Jackson SUBM (Oil-Filled Design) . . 44
F
F-Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 FRBH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 FRBHJC . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 46
M
M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Mark 3 ASME Standard . . . . . . . . . . . . . . . 10 Mark 3 In-Line (ASME) . . . . . . . . . . . . . . . 11 Mark 3 ISO Close Coupled . . . . . . . . . . . . . 1 Mark 3 ISO Recessed Impeller. . . . . . . . 12 Mark 3 ISO Self-Priming. . . . . . . . . . . . . . 12 Mark 3 ISO Standard . . . . . . . . . . . . . . . . . 12 Mark 3 Lo-Flo (ASME) . . . . . . . . . . . . . . . . 10 Mark 3 Recessed Impeller (ASME) . . 11 Mark 3 Unitized Self-Primer (ASME) . . 10 ME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 MEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 MENBLOC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 MEV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 MF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 MFV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 MJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 MJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 MN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 MND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 MNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 MNV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Molten Salt VTP . . . . . . . . . . . . . . . . . . . . . . 65 MP1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 MP1 Systems Packaging . . . . . . . . . . . . . 53 MPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
C
CA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 CAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 CAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 CHTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 CPXS Magnetic Drive . . . . . . . . . . . . . . . . . 13 CPXV Chemical Sump . . . . . . . . . . . . . 13, 48 CSB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 CSX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 CVP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 65
G
GA Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Gearex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 GR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Guardian. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
H
HDB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 HDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 HDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 HDX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 HDX-TT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 HED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 HED-DS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 HPX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 HPXM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 HS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 HSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 HSO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 HWMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 HWMA2 (see HWMA) . . . . . . . . . . . . . . . . . . . 17 Hydraulic Decoking Systems. . . . . . . . . . 63
D
D800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 DFSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 DMX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Drain-Titan. . . . . . . . . . . . . . . . . . . . . . . . 47, 49 DS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 DSVP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DVSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 DVSR (non-nuclear) . . . . . . . . . . . . . . . . . . 31 DVSR (nuclear) . . . . . . . . . . . . . . . . . . . . . . 59 DVSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 DWEER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
I
IPS Products . . . . . . . . . . . . . . . . . . . . . . . . . 63
72
flowserve.com
MSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 MSP2 (see MSP) . . . . . . . . . . . . . . . . . . . . . . . 18 MSX . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 44, 47 MVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 MVX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
R
R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 RJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 RJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
VSMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 VTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 VTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
W
WCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 WD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 WDF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 WDX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 WFSD Thruster
(see Pleuger WFSD Azimuthing Thruster) . . . . 64
N
NM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 N-Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
S
SMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 SMX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 SUBM
(see Byron Jackson SUBM or Pleuger SUBM) . .44
P
PHL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Pleuger SUBM (Water-Filled Design) . . . 44 Pleuger WFSD Azimuthing Thruster . . . 64 Polybase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PolyChem GRP . . . . . . . . . . . . . . . . . . . . . . 14 PolyChem M-Series . . . . . . . . . . . . . . . . . . 15 PolyChem S-Series. . . . . . . . . . . . . . . . . . . 14 PolyChem VGRP . . . . . . . . . . . . . . . . . . 14, 48 Polyshield . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PVML . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PVXM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
T
Terra-Titan . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Titan Slurry . . . . . . . . . . . . . . . . . . . . . . . . . . 19 TKW Cryogenic Liquid Expander . . . . . . 62 TSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
U
UZDL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
V
V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 VCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 VKW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 VPC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 VQE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 VSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Q
QL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 QLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 QLQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 QLQC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
WIK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 WIKO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 WMA (see HWMA). . . . . . . . . . . . . . . . . . . . . . 17 WMA2 (see HWMA) . . . . . . . . . . . . . . . . . . . . 17 WNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 WNC-HP (see WNC) . . . . . . . . . . . . . . . . . . . . 35 WTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 WUC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 WUC-LNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 WUJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 WX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 WXB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 WXB-B (see WXB) . . . . . . . . . . . . . . . . . . . . . . 35 WXH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Y
YHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
73
USA and Canada Flowserve Corporation 5215 North OConnor Blvd. Suite 2300 Irving, Texas 75039-5421 USA Telephone: +1 937 890 5839 Europe, Middle East, Africa Flowserve Corporation Parallelweg 13 4878 AH Etten-Leur The Netherlands Telephone: +31 76 502 8100 Latin America Flowserve Corporation Martn Rodriguez 4460 B1644CGN-Victoria-San Fernando Buenos Aires, Argentina Telephone: +54 11 4006 8700 Telefax: +54 11 4714 1610 Asia Pacific Flowserve Pte. Ltd. 10 Tuas Loop Singapore 637345 Telephone: +65 6771 0600 Telefax: +65 6862 2329
Bulletin FPD-100j (E/A4) Printed in USA. March 2012. Flowserve Corporation To find your local Flowserve representative: For more information about Flowserve Corporation, visit www.flowserve.com or call +1 937 890 5839.
flowserve.com

FPD 100 Ea4

Uploaded by

Copyright:

Available Formats

FPD 100 Ea4

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FPD 100 Ea4

Uploaded by

Copyright:

Available Formats

Pump Product Catalog

Pump Supplier to the World

Product Brands of Distinction

Committed to the Complete Pump System Life Cycle

A Guide to Flowserve Pumps

Pulp and Paper

Between Bearings Pumps

Pump Selection Guide

Oil and Gas Downstream Upstream and Pipeline Chemical Processing

Power Generation (Fossil, Renewables, Nuclear)

Residuum and Heavy Oil Upgrading

Gas Treating and Sulfur Recovery

Crude, Product and CO2 Pipeline

Heavy Oil, Oil Sands and Shale

Off-sites and Waste Treatment

Volatile Organic Compounds

Water Supply and Treatment

Renewable Fuel Production

Water and CO2 Injection

Drilling and Production

Pump Category Overhung

Gear Screw Multiphase Reciprocating

Flue Gas Desulfurization

Caustic and Chlor-Alkali

Boiler Feed Booster

NGL and LPG

Geothermal Well Services

Power Generation (Fossil, Renewables, Nuclear)

Primary Metals Mining Pulp and Paper General Industry

Overhung Pumps flowserve.com

Mark 3 ASME Standard

Mark 3 Unitized Self-Primer

Overhung Chemical Process

Mark 3 Recessed Impeller

Guardian Magnetic Drive

Overhung Chemical Process

Mark 3 ISO Standard

Mark 3 ISO Self-Priming

Mark 3 ISO Recessed Impeller

Overhung Chemical Process

Mark 3 ISO Close Coupled

CPXV Chemical Sump

CPXS Magnetic Drive

Overhung Chemical Process

PolyChem GRP Engineered Polymer Composite

PolyChem VGRP Engineered Polymer Composite Sump

PolyChem S-Series Fluoropolymer Lined

Overhung Chemical Process

PolyChem M-Series Fluoropolymer Lined, Magnetic Drive

Polyshield Baseplate and Foundation System

Polybase Polymer Concrete Baseplate

Overhung Chemical Process

HPX (OH2) Centerline Mounted

HPXM (OH2) Centerline Mounted, Low-Flow

PHL (OH2) Centerline Mounted

Overhung API Process

See Bulletin PS-10-5.

ERPN Centerline Mounted

PVXM (OH3) Vertical In-Line