Scribd
Upload
70 views

Advanced Computer Application

The document covers the topics of computer basics that will be taught in an advanced computer applications course. It discusses the five generations of computers from the first generation that used vacuum tubes to the current fifth generation. It describes the characteristics and examples of computers from each generation and how they evolved with the introduction of transistors, integrated circuits, microprocessors and parallel processing. The document also defines different types of computers based on size, users and efficiency like microcomputers, mini computers, mainframes and supercomputers. Finally, it lists some system configuration and tool topics that will be covered like changing screen settings, adding/removing programs, and disk maintenance utilities.

Uploaded by

Justin Mashala
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
70 views

Advanced Computer Application

The document covers the topics of computer basics that will be taught in an advanced computer applications course. It discusses the five generations of computers from the first generation that used vacuum tubes to the current fifth generation. It describes the characteristics and examples of computers from each generation and how they evolved with the introduction of transistors, integrated circuits, microprocessors and parallel processing. The document also defines different types of computers based on size, users and efficiency like microcomputers, mini computers, mainframes and supercomputers. Finally, it lists some system configuration and tool topics that will be covered like changing screen settings, adding/removing programs, and disk maintenance utilities.

Uploaded by

Justin Mashala
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

ADVANCED TO COMPUTER APPLICATIONS.

TOPICS TO BE COVERED Advanced computer basics. Advanced Power Point 2003. Advanced Ms word 2003. Advanced Ms Excel 2003. Advanced Ms Access 2003. Prepared by Mr. Justin T.N. Mashala

MODULE I COMPUTER BASICS

COMPUTER GENERATIONS The evolution of computer started from 16th century and resulted in the form that we see today. However, has also undergone rapid change during the last fifty years. Hence divided into five distinct phases known as Generations of Computers. Each phase is distinguished from others on the basis of the type of switching circuits used.

MODULE I COMPUTER BASICS

FIRST GENERATION COMPUTERS First generation computers used Thermionic valves.

MODULE I COMPUTER BASICS

These computers were large in size and writing programs on them was difficult. Some of the computers of this generation were: ENIAC: It was the first electronic computer built in 1946 at University of Pennsylvania, It was named Electronic Numerical Integrator and Calculator (ENIAC). The ENIAC was weighed 30 tons. Today your favorite computer is many times as powerful as ENIAC, still size is very small.

MODULE I COMPUTER BASICS


EDVAC: It stands for Electronic Discrete Variable Automatic Computer and was developed in 1950. The concept of storing data and instructions inside the computer was introduced here. This allowed much faster operation since the computer had rapid access to both data and instructions. The other advantages of storing instruction was that computer could do logical decision internally. Followings are the major drawbacks of First generation computers. 1. The operating speed was quite slow. 2. Power consumption was very high. 3. It required large space for installation. 4. The programming capability was quite low.

MODULE I COMPUTER BASICS


SECOND GENERATION COMPUTERS
Around 1955 a device called Transistor replaced the bulky electric tubes in the first generation computer. Transistors are smaller than electric tubes and have higher operating speed. They have no filament and require no heating. Manufacturing cost was also very low. Thus the size of the computer got reduced considerably. It is in the second generation that the concept of Central Processing Unit (CPU), memory, programming language and input and output units were developed. The programming languages such as COBOL, FORTRAN were developed during this period.

MODULE I COMPUTER BASICS

MODULE I COMPUTER BASICS


THIRD GENERATION COMPUTERS The third generation computers were introduced in 1964. They used Integrated Circuits (ICs). These ICs are popularly known as Chips. A single IC has many transistors, registers and capacitors built on a single thin slice of silicon. So it is quite obvious that the size of the computer got further reduced. Some of the computers developed during this period were IBM-360, ICL1900, IBM-370, and VAX-750. Higher level language such as BASIC (Beginners All purpose Symbolic Instruction Code) was developed during this period. Computers of this generations were small in size, low cost, large memory and processing speed is very high.

MODULE I COMPUTER BASICS

FOURTH GENERATION COMPUTERS


The present day computers that you see today are the fourth generation computers that started around 1975. It uses large scale Integrated Circuits (LSIC) built on a single silicon chip called microprocessors. Due to the development of microprocessor it is possible to place computers central processing unit (CPU) on single chip. These computers are called microcomputers. Later very large scale Integrated Circuits (VLSIC) replaced LSICs.

MODULE I COMPUTER BASICS

MODULE I COMPUTER BASICS

FIFTH GENERATION COMPUTER


The computers of 1990s and 2000s are said to be Fifth Generation computers. The speed is extremely high in fifth generation computer. Apart from this it can perform parallel processing. The concept of Artificial intelligence has been introduced to allow the computer to take its own decision. It is still in a developmental stage.

MODULE I COMPUTER BASICS


TYPES OF COMPUTER Computers they can be categorized depending upon the size, efficiency, memory and number of users. Microcomputer: Microcomputer is a single user device at the lowest end of the computer range in terms of speed and storage capacity. Its CPU is a microprocessor. Eg personal computer. Mini Computer: This is designed to support more than one user at a time. It possesses large storage capacity and operates at a higher speed. Eg computer used to support centralized database application in LAN. Mainframes: These types of computers are generally 32-bit microprocessors. They operate at very high speed, have very large storage capacity and can handle the work load of many hundreds or thousands of users. Eg computer used to support centralized database application in WAN.

MODULE I COMPUTER BASICS

TYPES OF COMPUTER Supercomputer: They are the fastest and most expensive machines. They have high processing speed compared to other computers. They have also multiprocessing technique. One of the ways in which supercomputers are built is by interconnecting hundreds of microprocessors. Eg. computer used in research, air craft design, artificial intelligence and biomedical research.

MODULE I COMPUTER BASICS


CONFIGURING THE SCREEN Make text and other items large or small. Change the icon desktop. Change your account picture. ADDING OR REMOVING PROGRAM From the control panel. From CD. Installing program. SYSTEM TOOLS Disk clean up. Scan disk. Formatting the drives. Character map.

You might also like