Scribd
Upload
2K views

ATM Installation Process Step 1: Go To The BIOS

This document outlines the 5 step process for installing an ATM: 1. Configure the BIOS settings and boot from the installation CD. 2. Format the hard drive and enter the ATM's unique ID in supervisory mode. 3. Configure settings like the roll width, date/time, and DES encryption key in supervisory mode. 4. Log in as the administrator in normal mode and configure the IP settings. 5. Download the software from the host server which completes the installation process.

Uploaded by

Monojit Kar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views

ATM Installation Process Step 1: Go To The BIOS

This document outlines the 5 step process for installing an ATM: 1. Configure the BIOS settings and boot from the installation CD. 2. Format the hard drive and enter the ATM's unique ID in supervisory mode. 3. Configure settings like the roll width, date/time, and DES encryption key in supervisory mode. 4. Log in as the administrator in normal mode and configure the IP settings. 5. Download the software from the host server which completes the installation process.

Uploaded by

Monojit Kar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

ATM Installation Process Step 1: Go to the BIOS Press F2 Go to ADVANCE/IDE configuration Check SATA#1 Configuration.

It should be [Comportable] Go to Boot Device priority Set CD/DVD as highest priority Press F10 and exit Insert installation CD

Step 2: Boot from CD -

Press any key to boot from CD Type prepflex [Formating process will start] Type ssatm as UNIQUE ID

(Wait until Supervisory Mode Appears)

Step 3: Supervisory Mode

Go to 5.Configure -Set Roll Width 40 [Menu No. 3] -Set Left Column 1 -Set Print 3 (as BOTH) [Menu No. 8] -Set Journal 2 (as DUAL) [Menu No. 30] -Set MSG Mode as 110200602 [Menu No. 6] -Set Date and Time (In 24 hour format) [Menu No. 5] -Set RST mode 2 (as NCR) [Menu No. 10] -Set EJ option [Menu No 30] 0. Display EJ Config 1. EJ Backup Mode -Standard -Multiple [Set Multiple] 2. Maximum No. of Backup [Set as 365] 3. Enable Multiple Destination [Enable] 4. Auto EJ Option -Cutover [Enable] -Schedule Init Option -Enable/Disable [Enable] -Schedule Init [Pattern-Weekly-Enter day as Saturday-Enter Time as 1600] -Agent [Disable] -Automatic Init Copy [Press Fixed(C:)] 5. Compression [Disable] 6. Maximum File Size [Set 1378] 7. DSBL Host Enter Of EJ model [Disable] 8. privacy option [Disable]

TCP/IP Config [Menu No 37]

- 0. RMT address [Set Host Ip provided,as like 10.30.1.1] - 1. RMT Port No [Set port number provided by Cashlink. Ex: 10011] - 3. LCL Port No [No Need To Modify] - 4. Config as Serv [No Need To Modify] - 5. Advanced -0. MSG format = 3 -1. LEN Size = 2 -2. LEN Format = 1 -3. LEN adjust = 2 -4. LEN offset -5. LEN Enabled -6. Receive Timeout -7. Retry Timer -8. Keep Alive -9. Room Close - Go to 6.ACCESS (For Assigning DES Key) Set DES Key provided by CashLink. The process are follow: Access(6) Key Entry(25) Change Key(9) Double Length XOR(3) Component (1,2,3)

Confirm New Mode(6)

Enter Key A press 0

Go to set DES Key part 1, Then same way set DES key part 2

Set Page Length: First go to system application menuSelf Service Configuration(8)USB Recipt printer(7)From Feed(1)Set as Toggle Block Mark

Step 4: Normal Mode

Log in as administrator (Password: EMV4906epp) Set ATM IP , Gateway, Subnet provided by CashLink at TCP/IP properties Also check ping reply of Host ip,Gateway Turnoff Firewall Copy the screen files to c:\SCREEN folder Install Remote Admin, Real VNC

For Keep ATM Machine auto online mode after reboot, we have to edit REGEDIT file. Process are as follow: Write regedit on RUN menu. HKEY_LOCAL_MACHINE VPICOOMS SOFTWARE NCR ADVANCE NDC

Clear comms buffer (Set 1 instead of 0)

Run C:\security\ssauto1\STANDC.exe for suvervisory mode

Step 5: Downloading from HOST Wait until a blue screen with 002 appears. It means that the ATM is ready for downloading. Wait until cash link page appears that results a succesfull installation. If a blue screen with 003 appears then toggle the switch and go to 002 blue screen and wait for downloading as described above .. Prepared By: Monojit Kar Munna Service Support Engineer Networld Bangladesh Ltd.

You might also like