Scribd
Upload
11K views9 pages

Smart Plant Review Tips

This document provides tips for using piping design software. It outlines how to: 1) Change window views and zoom in/out. 2) Adjust the view cone and clipping planes. 3) Rotate around an item by placing it at the centerpoint. 4) View model attributes and create display sets to customize visibility. 5) Measure distances using the snaplock tool.

Uploaded by

Tony
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11K views9 pages

Smart Plant Review Tips

This document provides tips for using piping design software. It outlines how to: 1) Change window views and zoom in/out. 2) Adjust the view cone and clipping planes. 3) Rotate around an item by placing it at the centerpoint. 4) View model attributes and create display sets to customize visibility. 5) Measure distances using the snaplock tool.

Uploaded by

Tony
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Piping Design http://www.azpiping.

com

Smart Plant Review Tips


This report was downloaded from
http://www.Azpiping.Com/Guide

Brought to you by Hung Hong


Website, Click Here to visit

I. Layout

Here is typical layout.

You can display or hidden any window by right click at toolbar then select menu you want or
using short cut key
Piping Design http://www.azpiping.com

II. Change background color

View->Setting->Edit then select color you like.Click OK to finish

III. Zooming in, zoom out on an item.

1. You can use zoom in and zoom out menu at toolbar

2. In Lateral Mode
Piping Design http://www.azpiping.com

If you slide the “perspective angle”


down, the view cone angle will increase

3. In Encircle Mode

If you slide the “encircle radius” down,


radius will increase

4. Other ways
Piping Design http://www.azpiping.com

-Moving the eye-point closer to the object.


Drag the View Cone on the Plan View

- Other ways, on the Main View Window,


move forward by dragging mouse –up while
holding down the left mouse button.
You need to active forward/back/left/right
icon

IV. Adjusting the View Cone

1. Adjust Far Clipping Plane


- Left click outside the view cone
- Drag the mouse to desired
position of far clipping plane and
accept by clicking on left button
again.

2. Adjust Near Clipping Plane


- Left click outside the view cone,
- Check if the far clipping plane can
be moved
-Right mouse click and then drag
the mouse to desired position of near
clipping plane and accept by clicking
on left button again.
Piping Design http://www.azpiping.com

V. Rotation around an item

Follow 4 steps below:

1. Click on View Menu -> Place -> Centerpoint Only

2. Double-Left Click on the item -> Left Click. The item will be placed at center of
main view window

3. Click on Rotate button and the Encircle button


Piping Design http://www.azpiping.com

4. Now, you can start rotating around the item in the main window by dragging mouse –up-
down-left-right while holding down the left mouse button.

VI. Viewing Model Attributes

-Click on the Auto-Highlight icon,


-Click on the item and the attributes will
be displayed on the lower pane.

VII. Display Sets


-You can define the collection by file,
by level, by color, by line-id, by
equipment number or any attribute and
any combination of attributes.
- You can change color, hide, unhide
and etc.

1. Create New Display Set.

Clicking on Tools -> Display Set -> New -> Display Set
Piping Design http://www.azpiping.com

Key in name -> Edit

Click on Insert

Select critical in the drop down menu, eg

Then click Ok->OK to finish

2. Save and Recall


Piping Design http://www.azpiping.com

If you want to recall display window later, you need to use Save and Recall Views

-Click View Menu


- Select Save and recall View

- Click on “Add Current View”

- Or “Create Group” if you need to


group all similar saved views

To Recall View
-Click on Save and Recall Views
again
- Highlight Saved View to Recall
-Click on Recall View

VIII. Measuring Distances


Piping Design http://www.azpiping.com

Or go to Tools -> Measure -> Snaplock


Or Click on Snaplock Measurement icon

First Point
Click on Snaplock Measurement Icon ( Or
press F8 )
-Double click near first reference point
-If Red box is the desired reference point,
Left Click again to accept position.
-if not, right-mouse click to reset and move
the red box to other positions
-Once the reference point is accepted, a
blue box will be placed.

Second point:
-Click on Snaplock Measurement Icon ( Or
press F8 )
- Double click near second point
-If Red box is the desired reference
-If not, right-mouse click to reset and move
the red box to other positions

Delete Measurements

-Go to “Tools”
- Select “Measure”
-Select “Delete All Measurements”
( or Ctr+Alt+M)

You might also like