BF 0208

BF0208-15_CoverOnly.
qxp 06-02-2007 08:33 Page 1
Microphones & Conditioning
Microphones & Conditioning – Product Catalogue, Version 15

ËBF-0208---~Î
BF 0208 – 15
HEADQUARTERS: DK-2850 Nærum · Denmark · Telephone: +45 4580 0500

Fax: +45 4580 1405 · www.bksv.com · [email protected] Product Catalogue, Version 15
Australia (+61) 2 9889-8888 · Austria (+43) 1 865 74 00 · Brazil (+55) 11 5188-8161
Canada (+1) 514 695-8225 · China (+86) 10 680 29906 · Czech Republic (+420) 2 6702 1100
Finland (+358) 9 521300 · France (+33) 1 69 90 71 00 · Germany (+49) 421 17 87 0
Hong Kong (+852) 2548 7486 · Hungary (+36) 1 215 83 05 · Ireland (+353) 1 807 4083
Italy (+39) 0257 68061 · Japan (+81) 3 5715 1612 · Netherlands (+31) 318 55 9290
Norway (+47) 66 771155 · Poland (+48) 22 816 75 56 · Portugal (+351) 21 4169 040
Republic of Korea (+82) 2 3473 0605 · Singapore (+65) 6377 4512 · Spain (+34) 91 659 0820
Slovak Republic (+421) 25 443 0701 · Sweden (+46) 33 22 56 22 · Switzerland (+41) 44 880 7035
Taiwan (+886) 2 2502 7255 · United Kingdom (+44) 14 38 739 000 · USA (+1) 800 332 2040
Local representatives and service organisations worldwide

BF0208-15_Welcome.qxp 06-02-2007 08:57 Page 2
WELCOME
Welcome to Brüel & Kjær’s Microphones & Con-
ditioning Catalogue covering our full range of
Microphones, Preamplifiers, Accessories, Hydro-
phones, Pressure Transducers and Acoustic
Conditioning Amplifiers. The products are sorted
individually into easy to follow tables listing the
most important specifications and making it
easy for you to select the right product for your
particular measurement needs.
A Heritage in Excellence
Although originally invented by Highly skilled specialists assemble
Edward Christopher Wente back all our microphones in a clean
in 1916, condenser measuring room environment. Most of our
microphones were not really microphones use stainless steel
produced in volume quantities and laser welding technology.
until 1956 when Brüel & Kjær Lately though, the use of titani-
introduced Type 4131 and Type um has pushed microphone per-
4132 cartridges. At the end of formance one step further,
the fifties Brüel & Kjær already bringing with it benefits such as
had a complete range of meas- the surface microphone technol-
uring microphones covering ogy and the all-titanium Low-
sizes from ¼- to 1-inch. Ever noise TEDS Microphone Type
since, Brüel & Kjær has kept its 4955.
commitment to maintaining Microphone Type 4160
market leadership in measuring Wealth of Experience

microphones. A number of im- Knowledge and experience go
portant milestones and numer- hand-in-hand and we have – the Brüel & Kjær University – from which we can build and spread
ous patents are proof of this. accumulated over 60 years’ sound and vibration related knowledge worldwide.
worth. In fact, many of our
Our dedication to total customer employees are world-renowned Top Quality
satisfaction means that selecting experts in their respective fields. In all aspects of sound and vibration there are challenges to be
a transducer from Brüel & Kjær Our expertise doesn’t only come met. For example, making sure that the car that one takes to
gives you not only peak per- from within our organisation; it work each day can withstand the mechanical shocks imposed on
formance but also optimal prod- also comes from working closely it, demands measurements of accuracy and precision. This
uct support. And choosing the together with our partners. In requires instruments with the performance and quality to match.
total measurement chain from this way we can further our All our products are thoroughly tested, often in the harshest
Brüel & Kjær brings you addi- declared mission – to enhance environmental conditions. Extremely high standards are met in
tional benefits such as CIC the environment, the quality all aspects of product and service provision, as reflected in our
(Charge Injection Calibration), and the joy of life for everyone status as an ISO 9001 certified company. Legislation also sets
Dyn-X Technology, the recent by improving sound and con- exacting standards. This often means documented results that
REq-X technology for real-time trolling vibration. With all this are traceable to known sources, such as a national calibration
transducer correction and, of expertise we have been able to laboratory. And naturally, the support customers receive must
course, full application support. establish our knowledge centre always be the most reliable.
2 Microphones & Conditioning – February 2007 Brüel & Kjær

CONTENTS
A Heritage of Excellence .........................................................................................................................................1
Selecting the Right Microphone .............................................................................................................................2
Microphone Standards .......................................................................................................................................3
Electroacoustic Standards ..................................................................................................................................3
Maximum Limits and Dynamic Range ...............................................................................................................4
Replacing Discontinued Brüel & Kjær Microphones .........................................................................................4
Microphones ............................................................................................................................................................5
Free-field Microphones ......................................................................................................................................5
Diffuse-field Microphones .................................................................................................................................6
Pressure-field Microphones ................................................................................................................................7
Low-noise Microphones .....................................................................................................................................9
Array Microphones ...........................................................................................................................................10
High-intensity Testing ......................................................................................................................................11
Piezoelectric Microphones ...............................................................................................................................12
Hydrophones .....................................................................................................................................................12
PSI or dB? ..........................................................................................................................................................12
Outdoor Microphones ......................................................................................................................................13
Laboratory Standard Microphones ..................................................................................................................14
Customised Products ........................................................................................................................................15
Miscellaneous ....................................................................................................................................................15
TEDS Microphones ............................................................................................................................................17
Microphone Preamplifiers .....................................................................................................................................21
The Classical Preamplifier .................................................................................................................................21
The DeltaTron Preamplifier .............................................................................................................................21
Brüel & Kjær Range of Microphone Preamplifiers ..........................................................................................22
Replacing Discontinued Brüel & Kjær Preamplifiers .......................................................................................22
Microphone Verification and Calibration .......................................................................................................26
Sound Intensity ......................................................................................................................................................27
Sound Intensity Probes .....................................................................................................................................27
Sound Intensity Microphone Pairs ...................................................................................................................28
Dual Preamplifier ..............................................................................................................................................28
Sound Intensity Calibrators ..............................................................................................................................29
Comparison of Sound Intensity Calibrators ....................................................................................................29
Microphone & Preamplifier Extension Cables .....................................................................................................30
Raw Cables ........................................................................................................................................................33
Cable Length and Current Limitation in Preamplifiers ..................................................................................34
Microphone Accessories ........................................................................................................................................36
Adaptors ............................................................................................................................................................36
Windscreens ......................................................................................................................................................37
Nose Cones ........................................................................................................................................................38
Turbulence Screen ............................................................................................................................................38
Outdoor Protection ..........................................................................................................................................39
Preamplifier Holders .........................................................................................................................................39
Corrector ...........................................................................................................................................................39
Tripods ...............................................................................................................................................................40
Electrostatic Actuators .....................................................................................................................................40
Adaptors for Calibration ..................................................................................................................................40
www.bksv.com i
Miscellaneous ................................................................................................................................................... 41
Hydrophones ......................................................................................................................................................... 44
Hydrophone Cables and Connectors .............................................................................................................. 45
Pressure Transducers ............................................................................................................................................. 46
Signal Conditioning .............................................................................................................................................. 50
NEXUS Conditioning Amplifiers ..................................................................................................................... 52
NEXUS Microphone Conditioning Amplifier .................................................................................................. 53
NEXUS DeltaTron Conditioning Amplifiers .................................................................................................... 53
NEXUS Charge Conditioning Amplifiers ........................................................................................................ 54
Microphone Power Supply Type 2829 ............................................................................................................ 55
Dual Microphone Supply Type 5935/5935-L ................................................................................................... 56
8-channel Acoustic Front-end Type 5966 ....................................................................................................... 57
Measuring Amplifier Type 2525 ..................................................................................................................... 58
16-channel DeltaTron Conditioning Amplifier Type 2694 ............................................................................ 59
PE/DeltaTron Signal Conditioner EE-0212 ...................................................................................................... 60
DeltaTron Power Supply Type WB-1372 ........................................................................................................ 61
Battery-powered DeltaTron Conditioner EE-0247 ......................................................................................... 62
3-channel DC/Bridge Amplifier Type EE-0215 ................................................................................................ 63
Calibration ............................................................................................................................................................. 64
Calibrators ........................................................................................................................................................ 64
Brüel & Kjær Service .............................................................................................................................................. 66
Maximise the Return on your Investment ...................................................................................................... 66
Installation ....................................................................................................................................................... 66
Education ......................................................................................................................................................... 66
Support ............................................................................................................................................................. 66
Global Service .................................................................................................................................................. 67
Calibration ....................................................................................................................................................... 67
Maintenance .................................................................................................................................................... 67
Upgrade ........................................................................................................................................................... 67
Glossary of Acoustical Terms ................................................................................................................................ 68
Sales and Service Worldwide ............................................................................................................................... 71
Index ...................................................................................................................................................................... 73
Type Number Index .............................................................................................................................................. 74
ii Microphones & Conditioning Brüel & Kjær

A HERITAGE OF EXCELLENCE
Brüel & Kjær has more than 50 years of proven committ-
ment to continuous product improvement and ground-
breaking new innovations in measuring microphones.
1956 Type 4131 World’s first volume-produced measurement microphones, Types 4131
(free-field) and 4132 (pressure-field), developed, amongst others,
by Dr. Per V. Brüel
First Generation
1967 Type 4138 World’s first 1/8” measuring microphone.

Due to on-going product improvements, this type is still available
1975 Type 4160 Brüel & Kjær is requested to produce a replacement for the Western Electric
WE 640 AA Reference Microphone. As a result, Type 4160 and later the ½” Type
4180 were introduced. These are still the world de facto acoustical standards
1980 Type 4155 Brüel & Kjær launches the world’s first high-stability, measurement grade,
electret microphones
1984 Type 4179 Using advanced modelling and clever design, this microphone has a noise floor
of –2.5 dB(A), still unbeaten after nearly 30 years!
1987 Type 4182 Brüel & Kjær introduces probe microphone for measurement in extremely
confined spaces and up to more than 600ºC
Falcon Range
1993 Type 4188 * The Falcon series is introduced. Featuring stainless steel, press-fitted
diaphragms, these microphones result in a step change in microphone
technology
1994 Type 4189 Falcon series at peak performance.

Type 4189 is probably the world’s most popular ½” free-field microphone
2000 Type 4297 The world’s only one-unit Sound Intensity Calibrator enables calibration
without dismantling the probe
Titanium Generation
2003 Type 4948 * Surface Microphone – another Brüel & Kjær first.
“All Titanium” and originally developed for Aerospace applications
2004 Type 4949 * Surface Microphones now also find their way into automotive,
where they break new frontiers in wind-tunnel testing
2005 Type 4952 * Another “world’s first” from Brüel & Kjær is this outdoor microphone
where all parts exposed to the weather are made from polymer materials
2006 Type 4955 * Continuing the “All Titanium” concept, this TEDS microphone has
1.1 V/Pa sensitivity and a typical noise floor of 5.5 dB
Pictures are not to scale * Utilising one or more Brüel & Kjær patented priciples 060229
www.bksv.com A Heritage of Excellence 1

SELECTING THE RIGHT MICROPHONE
Selecting the best microphone for a given application can Which kind of input module – classical or DeltaTron®?
seem to be an overwhelming task due to the many different DeltaTron can only work with prepolarized types, and classical
types to choose from. The interactive transducer selection input with both prepolarized and externally polarized car-
guide on www.bksv.com can be a big help. In this catalogue tridges. For more information about DeltaTron and classical
we take a slightly different approach by introducing the input see the preamplifier section. For portable instru-
microphone matrix. ments and where high humidity is present, prepolarized
microphones are preferred. For more general use in the
Condenser microphones are either externally polarized or laboratory or where high temperature is present, the use
prepolarized. They come in different sizes – 1-inch, ½-inch, of external polarised microphones is recommended.
¼-inch, or 1/8-inch – and are optimised for either free-,
pressure-, or diffuse-field. Microphones that do not directly Does the microphone have to fulfill any specific standard?
match one of these classes are denoted as “Special Micro- If this is the case the “Standards” table might be helpful.
phones”.
Frequency range and maximum sound pressure level (SPL)
Not all positions in the matrix correspond to a type will often determine which microphone size to use.
number, for example, 1-inch microphones are normally externally
polarized, since they were introduced before prepolarized Generally a smaller microphone has a broader frequency
microphones could be produced with sufficient stability. range and a lower sensitivity. For more details see the
“Maximum Limits and Dynamic Range” section.
1/8-inch microphones are pressure types. Due to their small
size, the free field and pressure response are approximately For which sound field should the microphone be
the same up to quite high frequencies (for example, the optimised?
free-field correction is less than 1 dB at 15 kHz). For measurements made away from reflecting surfaces, for
example, when making outdoor measurements, or in
Mapping the Brüel & Kjær measurement microphones in acoustically well-damped indoor environments, a free-field
the microphone matrix is now a simple task. microphone is best. But for measurements made in small
closed couplers, or close to hard surfaces, a pressure-field
For selection consider the following: microphone is best. For measurements in enclosed areas
where reverberation is likely, microphones optimised for
diffuse-field (random-incidence) response are best.
Microphone Type 1/8-inch 1/4-inch 1/2-inch 1-inch Polarization

4137
4176
4954 4188 Prepolarized
Free-field 4189
4950
4190
4939 4145 Externally polarized
4191
4947
4944 4948 Prepolarized
Pressure-field 4949
4938
4138 4192 4144 Externally polarized
4941
4942 Prepolarized
Diffuse-field
4943 Externally polarized
4957 4948
Prepolarized
4958 4949
Special 4187 4180
4160
4938-WH-1418 4193 Externally polarized
4179
4938-W-001 4955
2 Microphones & Conditioning Brüel & Kjær

In some cases, pressure type microphones can also be Abbreviations used for Standards in the Tables
found to have sufficiently flat random incidence response.
This is because the random incidence response of a pres- IEC 61094 IEC 61672 ANSI
sure-field microphone is much flatter across the frequency A IEC 61094 – 4 WS1F I IEC 61672 Class 1 K ANSI S1.4 Type 1
range than that of a microphone optimised for flat free-field
B IEC 61094 – 4 WS2F J IEC 61672 Class 2 L ANSI S1.4 Type 2
response. A special case is the measurement of surface
pressure where surface microphones would be the obvious C IEC 61094 – 4 WS3F M ANSI S1.12 Type M
choice. D IEC 61094 – 4 WS1P
E IEC 61094 – 4 WS2P

Special applications
For special applications, a special microphone can be se- F IEC 61094 – 4 WS3P
lected, for example, laboratory reference microphones, G IEC 61094 –1 LS1P

outdoor microphones, array microphones, infrasound mi- H IEC 61094 –1 LS2P
crophones, etc.
Microphone Standards
Laboratory reference microphones are specified in the in-
ternational standard IEC 61094–1:2000.
Measurement microphones are specified in the international

standard IEC 61094-4:1995.
These standards use the abbreviation WS for working

standards, for example, measurement microphones used in
daily routine measurements, while the abbreviation LS denotes
laboratory standards.
The digits following “WS” indicate as follows:

• 1 = 1-inch microphone
• 2 = ½-inch microphone
• 3 = ¼-inch microphone
The letter “F” denotes a free-field type and “P” a pres-
sure- field type
Electroacoustic Standards
The most relevant electroacoustic standard is the
IEC 61672:2002 “Electroacoustics – Sound Level Meters”.
Although the microphone is an important component in

any system that has to comply with IEC 61672 there are
many other factors to consider. Despite this, the following
tables also show which microphones are suitable for system
solutions that have to fulfill the requirements of IEC 61672.
It is also worth considering other parameters such as phase

response, venting, environmental exposure and documentation.
www.bksv.com Selecting the Right Microphone 3

Maximum Limits and Dynamic Range
Microphone Cartridges SPL limitations for different microphone cartridge sensitivity and a
DeltaTron preamplifier with 14 V pp output voltage swing
Inherent Noise: Even if a microphone is placed in a “totally
Max. SPL dB 50 mV/Pa 12.5 mV/Pa 3.16 mV/Pa 1 mV/Pa
quiet” room there will be some Brownian movement of
138 OK OK OK OK
the microphone back-plate and diaphragm. These movements
150 OK OK OK
correspond to very small pressure fluctuations and will
162 OK OK
cause changes in the cartridge capacity which – if a polari-
172 OK
sation voltage is present – cause an output voltage from
Note: With classical input and 120 V supply the maximum SPL is approximately
the microphone. The SPL corresponding to this output voltage 12 dB higher
is defined as the inherent noise of the cartridge.
3% Distortion Limit: Even though the condenser micro- Replacing Discontinued Brüel & Kjær
phone is highly linear, at a certain pressure there will be Microphones
some distortion of the output signal. At Brüel & Kjær we
specify the 3% distortion limit as a recommended maxi- Most present Brüel & Kjær microphones are Falcon Range®
mum limit for accurate measurements. microphones. The Falcon Range line offers a number of
advantages, for example, the diaphragm mounting method
10% Distortion Limit: Increasing the sound pressure behind (press fit mounted or laser welded) that provides a higher
the 3% distortion limit will result in a further increase in mechanical robustness. Furthermore, the use of a stainless
distortion. In some cases, a 10% distortion limit is specified. steel diaphragm results in an improved resistance to envi-
In many practical cases, the 10% distortion limit is determined ronmental conditions. The table can be helpful if you need
by the preamplifier. to replace an older Brüel & Kjær type.
Maximum SPL: Due to mechanical forces acting on the cartridge Recommended

Older Types of
there is a maximum pressure level which should never be Microphone
Replacement
exceeded or the long-term stability can be influenced and/ Microphone Types
or mechanical damage can happen. The corresponding 4133 4191
sound pressure level is called the maximum SPL. 4134 4192

4135 4939
Dynamic Range of Microphone/Preamplifier Combinations: 4136 4938
In a practical application, the lower limit of dynamic range 4147 4193
is determined by the combined noise from the cartridge 4155 4189
and the preamplifier. The upper SPL limit will often be de- 4165 4190
termined by the output voltage swing from the preamplifier. 4166 4943
This is especially important when using DeltaTron (IEPE) 4196/4935 4957
preamplifiers, since here the maximum voltage is limited 4951 4958
by the input stage compliance (open-circuit) voltage. 4181 4197
A compliance voltage of, say, 28 V as used in many front-ends

will limit the maximum voltage swing to around 20 Vpp
and this may determine the real maximum limit of a cartridge
preamplifier combination.
Brüel & Kjær defines the dynamic range as the range from
the noise floor to the SPL resulting in a 3% distortion limit
with a given cartridge/preamplifier combination, and nom-
inal compliance voltage where relevant.

MICROPHONES
Free-field Microphones
Free-field microphones are particularly suitable for making meter, or in an acoustically well-damped indoor environment,
measurements away from reflecting surfaces, for example, for example, in an office with natural acoustic damping.
when making outdoor measurements with a sound level
NEW
Type Number 4939 4954 4137* 4176 4188 4189

Diameter inch 1/4 1/4 1/2 1/2 1/2 1/2
Optimised Free-field Free-field Free-field Free-field Free-field Free-field
Standards C C J, L I, K I, K B, I, L
Nominal Open-circuit Sensitivity mV/Pa 4 3.16 31.6 50 31.6 50
Polarization Voltage** V 200 0 0 0 0 0
Optimised Frequency Response ±2 dB Hz 4 to 100000 4 to 80000 8 to 12500 7 to 12500 8 to 12500 6.3 to 20000
Dynamic Range with 35 to 164 40 to 164 15.8 to 146 14 to 142 15.8 to 146 15.2 to 146
dB(A) to dB
Preamplifier Type (2670) (2670) (2669) (2669) (2669) (2669)
Inherent Noise dB (A) 28 <35 14.2 13.5 14.2 14.6
Capacitance pF 6.1 5.1 12 12.5 12 13
Venting Side Side Rear Rear Rear Rear
Lower Limiting Frequency (–3 dB) Hz 0.3 to 3 0.3 to 3 1 to 5 0.5 to 5 1 to 5 2 to 4
Operating Temperature Range ºC – 40 to 150 –40 to 150 – 30 to 125 – 30 to 100 – 30 to 125 – 30 to 150
Temperature Coefficient dB/ºC +0.003 +0.009 + 0.005 – 0.004 + 0.005 –0.001
Pressure Coefficient dB/kPa – 0.007 –0.007 – 0.021 – 0.02 – 0.021 – 0.01
* Class 2 microphone for Type 2237 ** 0 V = Prepolarized microphone
NEW
Type Number 4190 4191 4950 4145

Diameter inch 1/2 1/2 1/2 1
Optimised Free-field Free-field Free-field Free-field
Standards B, I, L B, I, L, M I, K A, I
Nominal Open-circuit Sensitivity mV/Pa 50 12.5 50 50
Polarization Voltage* V 200 200 0 200
Optimised Frequency Response ±2 dB Hz 3.15 to 20000 3.15 to 40000 4 to 16 kHz 2.6 to 18000
Dynamic Range with 15 to 147 21.4 to 161 14 to 142 10.2 to 146
dB(A) to dB
Preamplifier Type (2669) (2669) (2669) (2669)
Inherent Noise dB (A) 14.5 20 13.5 10
Capacitance pF 16 18 12.5 66
Venting Rear Side Rear Rear
Lower Limiting Frequency (–3 dB) Hz 1 to 2 1 to 2 0.5 to 5 1 to 2
Operating Temperature Range ºC – 30 to 150 – 30 to 300 –30 to 100 – 30 to 100
Temperature Coefficient dB/ºC – 0.007 – 0.002 +0.006 – 0.002
Pressure Coefficient dB/kPa – 0.01 – 0.007 –0.02 – 0.015
* 0 V = Prepolarized microphone
www.bksv.com Microphones 5
Diffuse-field Microphones
A diffuse-field microphone, also called a random-incidence
microphone, is designed to have a flat response when signals
arrive simultaneously from all directions. They should,
therefore, not only be used for making measurements in
reverberation chambers, but also in all situations where
the sound field is diffuse, or where several sources contribute
to the sound pressure at the measurement position. Examples
include indoor measurements where the sound is reflected
by walls, ceilings, and objects in the room, or measurements
made inside a car.
In many cases the pressure and diffuse field response will

both be within ±2dB up to a certain frequency. In the example
for Type 4943 (shown below), both responses are within
±2 dB up til 10 kHz.
Type Number 4942 4943

Diameter inch 1/2 1/2
Optimised Diffuse-field Diffuse-field
Standards K K
Nominal Open-circuit Sensitivity mV/Pa 50 50
Polarization Voltage* V 0 200
Optimised Frequency Response ±2 dB Hz 6.3 to 16000 3.15 to 10000
15.2 to 146 15.9 to 147
Dynamic Range with Preamplifier Type dB(A) to dB
(2669) (2669)
Inherent Noise dB (A) 14.6 15.5
Capacitance pF 13 16
Venting Rear Rear
Lower Limiting Frequency (–3 dB) Hz 2 to 4 1 to 2
Operating Temperature Range ºC – 40 to 150 – 40 to 150
Temperature Coefficient dB/ºC – 0.001 – 0.010
Pressure Coefficient dB/kPa – 0.01 – 0.008
Preamplifier Included No No

Pressure-field Microphones
A pressure-field microphone is best suited for measurement .
of the sound pressure in a small closed couplers or close to
hard reflective surfaces (see picture). A special class of
pressure microphone is the so-called surface microphone,
which due to its unique geometrical dimensions, can be
mounted directly on surfaces such as the skin of an air-
plane or the surface of a car, for easy measurement of the
true pressure fluctuations. Brüel & Kjær Surface Microphones
Types 4948 and 4949 even have a built-in DeltaTron pream-
plifier with TEDS, that make them true plug and play
transducers.
Type Number 4138 4938* 4944 4947 4192 4144

Diameter inch 1/8 1/4 1/4 1/2 1/2 1
Optimised Pressure-field Pressure-field Pressure-field Pressure-field Pressure-field Pressure-field
Standards – F F K E, K, M D, L
Nominal Open-circuit Sensitivity mV/Pa 1 1.6 1 12.5 12.5 50
Polarization Voltage** V 200 200 0 0 200 200
Optimised Frequency Response ±2 dB Hz 6.5 to 140000 4 to 70000 4 to 70000 8 to 10000 3.15 to 20000 2.6 to 8000
52.2 to 168
42 to 172 46 to 170 21.4 to 160 20.7 to 161 11 to 146
Dynamic Range with Preamplifier Type dB(A) to dB (2670, UA-
(2670) (2670) (2669) (2669) (2669)
0160)
Inherent Noise dB (A) 43 30 30 17.5 19 9.5
Capacitance pF 3.5 6.1 5 14 18 55
Venting Side Side Side Rear Side Side
Lower Limiting Frequency (–3 dB) Hz 0.5 to 5 0.3 to 3 0.3 to 3 1 to 5 1 to 2 1 to 2
Operating Temperature Range ºC – 30 to 100 – 40 to 150 – 40 to 150 –30 to 125 – 30 to 150 – 30 to 100
Temperature Coefficient dB/ºC – 0.01 +0.003 +0.008 +0.006 – 0.002 – 0.003
Pressure Coefficient dB/kPa – 0.01 – 0.003 – 0.003 –0.006 – 0.007 – 0.016
Preamplifier Included No No No No No No
* 4938-W-001 is optimised for high static pressure ** 0 V = Prepolarized microphone
Type Number 4948 4948-A 4948-B 4949 4949-B
Diaphragm inch 0.41 0.41 0.41 0.41 0.41
Surface Surface Surface Surface Surface
Optimised
Pressure Pressure Pressure Pressure Pressure
Standards – – – – –
Nominal Open-circuit Sensitivity mV/Pa 1.4 1.4 1.4 11.2 11.2
Polarization Voltage* V 0 0 0 0 0
Optimised Frequency Response ±3 dB Hz 5 to 20000 5 to 20000 5 to 20000 5 to 20000 5 to 20000
Dynamic Range with Preamplifier Type dB(A) to dB 55 to 160 55 to 160 55 to 160 30 to 140 30 to 140
Inherent Noise dB (A) 55 (typical) 55 (typical) 55 (typical) 27.8 (typical) 27.8 (typical)
Capacitance pF N/A N/A N/A N/A N/A
Venting Front Front Front Front Front
Lower Limiting Frequency (–3 dB) Hz 1 to 5 1 to 5 1 to 5 0.5 to 5 0.5 to 5
Operating Temperature Range ºC –55 to 100 –55 to 100 –55 to 100 –55 to 100 –55 to 100
Temperature Coefficient dB/ºC 0.013 0.013 0.013 0.013 0.013
Pressure Coefficient dB/kPa – 0.007 – 0.007 – 0.007 – 0.007 – 0.007
Preamplifier Included DeltaTron DeltaTron DeltaTron DeltaTron DeltaTron
TEDS UTID 769 769 769 769 769
CIC No Yes Yes No Yes
Type 4948 used for measurement of sound pressure directly Type 4949 used for measurement of pressure fluctuations
on the skin of an airplane on the side window of a car

Low-noise Microphones
Low-noise microphones are required for qualification of floor of –2.5 dBA while Type 4955 has the size of a normal
anechoic chambers for Sound Power Measurements and ½″ TEDS microphone and an excellent noise floor of typi-
test of components with low Sound Power rating. Type cally 5.5 dnBA. Additionally, Type 4955 features a titanium
4179 must be used with dedicated preamplifier Type 2660 microphone cartridge and titanium preamplifier house.
or 2660-W-001. This combination has an unbeatable noise
Type Number 4179 4955 Low-noise Microphone Type 4179 is suitable for monitoring very
Diameter inch 1 1/2 low background noise levels down to –5.5 dB(A) together with
Optimised Low-noise Low-noise Preamplifier Type 2660.
Standards – – Type 4955 is a ½-inch “all titanium” TEDS microphone with a

Nominal Open-circuit Sensitivity mV/Pa 100 1100 guaranteed noise floor less than 6.5 dB(A).
Polarization Voltage V 200 200
Optimised Frequency Response ±2 dB Hz 10 to 10000 10 to 16000
–2.5 to 102 6.5 to 110
(2660) (Built-in)
Inherent Noise dB (A) –5.5* <6.5†
Capacitance pF 40 N/A
Venting Side Front
Lower Limiting Frequency (–3 dB) Hz 5 to 7 5
Operating Temperature Range ºC – 30 to 100 –20 to 100
Temperature Coefficient dB/ºC – 0.004 <±0.01
Pressure Coefficient dB/kPa – 0.016 –0.03
Preamplifier Included No Yes
TEDS UTID 116289
Connector N/A LEMO 1B
* Cartridge alone, must be used with Type 2660 preamplifier

† With integral preamplifier
Typical noise spectrum Type 4955

dB
10
-10
-20
10 100 1000 10000 Hz A L
060227
Array Microphones
Array applications are gaining in popularity. The picture on
the right shows a typical application where a “picture” is
taken of all noise sources in the engine compartment of a
car.
NEW NEW NEW
Type Number 4944-A 4954-A 4957 4958 Types 4944-A and 4954-A
Diameter inch 1/4 1/4 1/4 1/4 are robust cartridges useable
Optimised Array Free-field Array Array at higher frequencies and
temperatures.
Standards – – – –
Nominal Open-circuit Sensitivity mV/Pa 1 2.8 17 17 Types 4957 and 4958 feature
a higher sensitivity.
Polarization Voltage* V 0 0 0 0
Optimised Frequency Response ±2 dB Hz 16 to 70000 16 to 80000 50 to 10 k 20 to 20 k Type 4957 is an economy
Dynamic Range with Preamplifier Type dB(A) to dB 48 to 169 40 to 164 30 to 140 30 to 140 type with only basic TEDS
and limited frequency range,
Inherent Noise dB (A) 48 <40 <30 <30 while Type 4958 is a high-
Capacitance pF N/A N/A N/A N/A precision type with “Intelligent
Venting Side Side Front Front TEDS”, that is, a TEDS which
contains polynomial coeffi-
Lower Limiting Frequency (–3 dB) Hz 7 to 9 <9 <50 <50 cients describing the complex
Operating Temperature Range ºC –20 to 60 –20 to 100 –10 to 55 –10 to 55 transfer function of the
microphone. This information
Temperature Coefficient dB/ºC +0.008 +0.009 – –
can be used in the array
Pressure Coefficient dB/kPa – 0.003 –0.007 – – application in order to increase
Preamplifier Included DeltaTron DeltaTron DeltaTron DeltaTron sharpness and precision.
TEDS UTID/UDID 769 769 I27-0-0-0U I27-0-0-1U
Connector† Type SMB SMB SMB SMB
† Standard type array microphones use SMB connectors but as customised products they can be delivered with 10–32 UNF (Microdot) connectors

High-intensity Testing
Most noise measurements are limited to around 140 to
150 dB maximum SPL, but applications such as measurement
of gunshots, airbag deployment noise, etc., require meas-
urements of dynamic pressures fluctuations corresponding
to a SPL far beyond 160 dB.*
For measurements below 110 dB the condenser microphone

will normally be the preferred transducer, while above
200 dB pressure sensors have to be used. In the intermediate
range there is a choice between pressure sensor (piezoelectric
microphone) or condenser microphone. Piezomicrophones
are basically Gauge-PSIG types and are either charge or
piezoresistive type.
Charge types have the benefit of being hermetically sealed

and self contained (that is, they don’t need supply or po-
larization voltage). Charge transducers will work with voltage In cases where there isn’t a “stiff” pressure field, the higher
input amplifiers, but for best performance and ease of use and not so well specified free-field correction of the piezo
they should be connected to a charge input. microphones can be a problem.
Optimally, piezoresistive transducers need a full bridge setup Condenser microphones benefit from a higher degree of
and bridge input conditioning for best performance, they standardisation, wider frequency range, lower noise floor,
can basically work down to DC. and standardised calibration methods. They are readily
available as TEDS microphones for direct connection to industry
standard DeltaTron (IEPE) inputs. Condenser microphones
are normally fully specified with respect to frequency
response, free-field corrections, influence of accessories, etc.
* Note: Above 160 dB air behaves highly non-linearly
Type Number 4941 4938-WB-1418 High Sound Pressure Microphone Type 4941 is used for gunshots,
Diameter inch 1/4 1/4 fireworks and rocket testing.
Optimised High-pressure Airbag
High-static Pressure Microphone Type 4938-W-001 is specially
Standards – – designed for measuring in high static pressure from 1 – 10 Atm.
Nominal Open-circuit Sensitivity mV/Pa 0.09 0.4 The change in response at different static pressures has been
minimised.
Optimised Frequency Response ±2 dB Hz 4 to 20000 0.5 to 70000 Airbag Microphone Type 4938-WB-1418 is designed to fulfil
73.5 to 184 50 to 177 “Microphone and Preamplifier System for measuring acoustic
Dynamic Range with Preamplifier Type dB(A) to dB impulses within vehicles – SAE J247 FEB87”, but only when combined
(2670) (2670 WB 1419)
with Preamplifier Type 2670-WB-1419.
Inherent Noise dB (A) 59 30
Capacitance pF 3.3 6.1
Venting Side Side
Lower Limiting Frequency (–3 dB) Hz 0.3 to 3 0.05 to 0.2
Temperature Coefficient dB/ºC – +0.003
Pressure Coefficient dB/kPa – –0.003
Piezoelectric Microphones
Type Number 2510 2510-M4A 8507-C-2 8510-B-1 8510-B-2

Order Number EE-0205 EE-0206 EE-0158 EE-0161 EE-0162
Diameter inch 0.816 0.816 0.092 0.159 0.159
Optimised Piezoelectric Piezoelectric Piezoresistive Piezoresistive Piezoresistive
Standards – – – – –
Nominal Open-circuit Sensitivity mV/Pa 0.155* 0.155* 0.025** 0.045** 0.022**
Polarization Voltage V N/A N/A N/A N/A N/A
Specified Frequency Response Hz 1 to 10000 1 to 10000 0 to 20000 0 to 16000 0 to 20000
Dynamic Range dB SPL 100 to 180 100 to 180 80 to 181 95 to 177 100 to 181
Inherent Noise dB SPL N/A N/A N/A <78 <80
Capacitance pF 5200 5200 N/A N/A N/A
Venting N/A N/A N/A N/A N/A
Lower Limiting Frequency (–3 dB) Hz <0.7 Hz <0.7 Hz 0 Hz 0 Hz 0 Hz
Operating Temperature Range ºC – 54 to 260 – 54 to 260 – 54 to 107 – 54 to 121 – 54 to 121
* pC/Pa
** At 10 V excitation
ENDEVCO Types 2510 and 2510-M4A are both charge type PSI or dB?
transducers useable up to 180 dB SPL and 260°C. Type
2510-M4A provides special mounting for flush diaphragm Traditionally acoustical engineers work in dB SPL defined
applications. 20 × log (pa/20 μPa) where pa is the actual (dynamic) pressure
in pascals.
ENDEVCO Type 8507-C-2 is a miniature piezo microphone
(diameter less than 2.5 mm) capable of measuring up to at Pressure sensors often refer to PSI (Pounds Per Square
least 181 dB SPL and 15 kHz. Inch).
ENDEVCO Types 8510-B-1 and 2 are piezoresistive sensors It may be good to know that dB SPL can easily be converted
with a maximum temperature limit around 93°C, and maxi- to pascal and after that to PSI.
mum SPL of 180 dB for the 8510-B-2. These types feature
10–32 UNF thread mounting. 1 Pa = 0.0001450 pascal and hence:
dB SPL Pressure Pascal Pressure PSI

Hydrophones
94 1 0.000145
Although originally intended for underwater measure-
ments these hermetically sealed devices are also very suitable 154 103 0.145
for high intensity pressure measurements in air, this is because 174 104 1.45
of the low sensitivity of the hydrophone. The useable
frequency range is from a few fractions of a Hz to around 194 105 14.5
20 kHz.
200 2 × 105 29

Outdoor Microphones
Our outdoor microphones are intended for permanent or
semi permanent outdoor use. Aside from the obvious
weather protection required, one should also consider factors
such as calibration facilities, on-site remote verification (CIC
is the obvious method here), and conformance with standards
of special importance, for example, the requirements specified
in IEC 61672 Electroacoustics – Sound Level Meters. This
standard defines the requirements to the directivity re-
sponse of the microphone and is often an overlooked or
misinterpreted requirement.
All Outdoor Microphones are supported by a broad range

of accessories. Please refer to the accessories section for an
overview.
Outdoor Microphone Type 4952 in a typical noise monitoring
situation
NEW
Type Number 4184 4198 4952 Type 4184 Weatherproof Microphone Unit –
Diameter inch Probe 1/2 1/2 For permanent, semi-permanent and portable
Optimised Outdoor Outdoor Outdoor noise monitoring. It features a probe type
microphone for optimal protection and direc-
Standards I, K I, K I, K tivity response plus both CIC facility and a
Nominal Open-circuit Sensitivity mV/Pa 12.5 50 31.6 built-in acoustic sound source for verification.
Polarization Voltage* V 200 0 0
Type 4198 Outdoor Microphone Unit – For
Optimised Frequency Response ±2 dB Hz 20 to 8000 6.3 to 16000 8 to 12.5 kHz semi-permanent noise monitoring. Depending
Dynamic Range with Preamplifier Type dB(A) to dB 25 to 140 15.2 to 146 15.8 to 146 on circumstances, this well protected microphone
can sustain several months of unattended use.
Inherent Noise dB (A) 25 15.2 <16 Features CIC and Falcon Range data disc.
Venting Yes Rear Rear
Lower Limiting Frequency (–3 dB) Hz <20 2 to 4 1 to 5 Type 4952 Outdoor Microphone – The latest
member of the Brüel&Kjær Outdoor Microphone
Operating Temperature Range ºC – 40 to 55 – 25 to 60 –30 to 60 family. The outer parts of this microphone con-
Temperature Coefficient dB/ºC – 0.005 – 0.001 0.005 sist of carefully selected polymer materials
making it suitable even for longer periods of
Pressure Coefficient dB/kPa – 0.006 – 0.01 –0.021
unattended outdoor use (at least one year service
Preamplifier Included Yes Yes Yes interval). This microphone also features CIC.
The use of separate equalization filters
enables Type 4952 to fulfill the requirements
of IEC 61672 both for 0° and 90° of incidence.
Connector B&K 7-pin LEMO 1B LEMO 1B
UA-1404 Outdoor Microphone Kit – For protection
of your existing Type 4188, 4189, or 4190
microphones. Same performance as Type 4198.
Laboratory Standard Microphones
The most used laboratory standard microphones are Types in couplers and for maximum long term stability under ref-
4160 (1″) and 4180 (1/2″). These microphones have a well-defined erence conditions. The proven long term stability is in the
cavity in front of the diaphragm and are optimised for use area of a few mdB’s per year (see figure below).
Type Number 4160 4180 The most common way of performing primary calibration of
Diameter inch 1 1/2 laboratory standard microphones is to use the reciprocity cali-
Optimised Calibration Calibration bration principle. Brüel & Kjær offers the world’s most used reci-
procity calibration apparatus, that is, Type 5998 (see picture
Standards G H below) which is used as part of Reciprocity Calibration System
Nominal Open-circuit Sensitivity mV/Pa 47 12.5 Type 9699.
Optimised Frequency Response ±2 dB Hz 2.6 to 8000 4 to 20000
10 to 146 21 to 160
(2673) (2669)
Inherent Noise dB (A) 9.5 18
Capacitance pF 55 17.5
Venting Side Side
Lower Limiting Frequency (–3 dB) Hz 1 to 2 1 to 3
Temperature Coefficient dB/ºC + 0.003 – 0.002
Pressure Coefficient dB/kPa – 0.0016 – 0.007
Connector
Reciprocity Calibration Apparatus Type 5998 Measured stability of a Brüel & Kjær Type 4180 Laboratory
Reference Microphone over a period of 10 years. Note:
0.2 dB/division

Customised Products
Despite the large number of Some examples of customised products:
transducers available in our
standard programme, special • Short version of Preamplifier Type 2670 with supply
measurement situations can oc- voltage regulation
cur requiring transducers that • Surface Microphones with 30 m cable
are not part of Brüel & Kjær’s • Classical preamplifier with both IVC and CIC
standard product range. In order • 1/8-inch microphones with open-end flush grids
to effectively meet our customer’s • Customer specific TEDS templates
needs we offer customised • Sandwich version of the Surface Microphone for special
products. applications
• Cable reinforcement solutions
We already have a broad port- • Array microphones with 10–32UNF connector instead of SMB
folio of non-standard products • Wideband phase matching of TEDS microphones
developed for special applications. • Hydrophone phase calibration
Maybe one of these products can also solve your problem? • Pressure sensing microphone with special mounting
Please contact your local Brüel & Kjær representative for adaptor
further information.
Miscellaneous
4193 with 4189 with Low-frequency Microphone Type 4193 is

Type Number 4193
UC-0211 UC-5265 designed to measure infrasound, for example,
Diameter inch 1/2 1/2 1/2 in ship engine rooms, in helicopters and in
Optimised Low-frequency Low-frequency Low-frequency wind-buffeted buildings.
Standards E, K, M E, K, M B, I, L Type 4189 with UC-5265 brings the –3 dB limit

Nominal Open-circuit Sensitivity mV/Pa 12.5 2 50 of Type 2260 Sound Level Meter down to 1 Hz.
Polarization Voltage V 200 200 0
Optimised Frequency Response ±2 dB Hz 0.07 to 20000 0.13 to 20000 –3 dB to 1 Hz
20.7 to 161 29 to 148
(2669) (2669)
Inherent Noise dB (A) 19 29
Capacitance pF 18 118 13
Venting Side Side Rear
Lower Limiting Frequency (–3 dB) Hz 0.01 to 0.05 <0.1 1
Operating Temperature Range ºC – 30 to 150 – 30 to 150 – 30 to 150
Temperature Coefficient dB/ºC – 0.002 – 0.002 –
Pressure Coefficient dB/kPa – 0.005 – 0.005 –
Preamplifier Included No No No
Connector Fits 4189
Type Number 4938-W-001 4101 4101-A High-static Pressure Microphone
Diameter inch 1/4 1/5 1/5 Type 4938-W-001 is specially
Binaural designed for measuring in
High static Binaural high-static pressure 1 –
Optimised Recording with
pressure Recording 10 Atm. The change in
TEDS
response at different static
Standards – – – pressure has been minimised.
Nominal Open-circuit Sensitivity mV/Pa 1.6 20 20
Binaural Microphone Type
4101 is designed especially
Optimised Frequency Response ±2 dB Hz 4 to 70000 20 to 20000 20 to 20000 for binaural recording where
42 to 172 testing on a human object is
Dynamic Range with Preamplifier Type dB(A) to dB 23 to 134 23 to 134 preferred and/or the use of the
(2670)
traditional Head and Torso
Inherent Noise dB (A) 30 23 23 Simulator (HATS) method is
Capacitance pF 6.1 N/A N/A precluded.
Venting Side Rear Rear
Lower Limiting Frequency (–3 dB) Hz 0.3 to 3 < 20 < 20
Operating Temperature Range ºC – 40 to 150 – 30 to 70 – 30 to 70
Temperature Coefficient dB/ºC +0.003 – –
Pressure Coefficient dB/kPa – 0.003 – –
Preamplifier Included No DeltaTron DeltaTron
Connector
Type Number 4182 4187 Probe Microphone Type 4182 has a choice of probe tubes, stiff
Diameter inch Probe 1/4 or flexible, making it perfect for measurements in awkward
Optimised Probe Pressure places.
Standards – – Impedance Tube Microphone Type 4187 is a 1/4-inch microphone

Nominal Open-circuit Sensitivity mV/Pa 3.16 4 specially designed for use in Impedance Tube Kit Type 4206. The
microphone features a non-detachable protection grid which
forms an airtight front cavity.
Optimised Frequency Response ±2 dB Hz 1 to 20000 1 to 6400
Dynamic Range with Preamplifier Type dB(A) to dB 42 to 164 –
Inherent Noise dB (A) 42 –
Capacitance pF N/A 6.4
Venting Selected Rear
Lower Limiting Frequency (–3 dB) Hz < 0.7 <1
Operating Temperature Range ºC – 10 to 700 –
Temperature Coefficient dB/ºC – 0.005 –
Pressure Coefficient dB/kPa – 0.007 –
Preamplifier Included Yes No
Connector

TEDS Microphones
Class I is always used with DeltaTron transducers since TEDS
can be implemented using the traditional coaxial cable.
For measuring microphones, Class II is the most commonly

used and pin 5 (often denoted as “No connection” in PDs)
is used to transmit the TEDS data. This is important when
using extension cables as some older cables might really
not have pin 5 connected, which will break the TEDS chain.
Since the TEDS microphone has been assembled under controlled

conditions, special precautions can be taken to avoid dust
and contamination entering the boundary between micro-
phone cartridge and the preamplifier. This is important in
order to maintain low noise even at high temperatures
and high relative humidity.
A wide range of TEDS (Transducer Electronic Data Sheet)
microphones are available from Brüel & Kjær. A TEDS micro-
Class I TEDS as used in a DeltaTron TEDS microphone
phone consists of a microphone cartridge and its pre-amplifer,
sealed to form one unit called the TEDS microphone.
CCLD
TEDS is standardised by IEEE and is supported by many
Signal
front-ends and conditioning amplifiers including
Brüel & Kjær’s PULSE front-ends, the NEXUS line of Condi-
tioning Amplifiers, the 16-channel Conditioning Amplifier
Type 2694 and many more. TEDS TEDS
TEDS offers a number of benefits:

Typical Class --l TEDS DeltaTron
• Plug and play facilities Microphone Input
060215
• Type, S/N, sensitivity and more read in directly from the
transducer
• Significantly reduced setup time
Class II TEDS as used in a TEDS microphone
• Practical elimination of cable routing errors 7-pin LEMO
• Transducer location can be read into the transducer
• The TEDS microphone is assembled under controlled 1 CIC Signal
conditions
2 GND
3 Pol Voltage
How does TEDS work?
Basically the chip containing the TEDS data and TEDS interface 4 Signal
is build into the microphone preamplifier. TEDS data is
updated during the boot sequence or whenever “update TEDS 5 TEDS Data
TEDS” is activated.
+V cc 6 +V cc
TEDS data can be transmitted to the front-end in two different -V cc 7 -V cc

ways:
– TEDS
Typical Class ll Classical Microphone
–
Microphone Input
• Class I TEDS – on the same wire as the analog signal 060214
• Class II TEDS – via a separate wire
The IEEE 1451.4 Standard Currently, only Array Microphones Types 4957 and 4958 are
Most sound and vibration transducers (Brüel & Kjær as well supplied with TEDS according to the final revision –
as other manufacturers) conform with IEEE P1451.4 V.0.9 IEEE 1451.4 V.1.0. This is because precision Array Micro-
which is actually a standard proposal and differs slightly phone Type 4958 requires more space for definition of the
from the final standard IEEE 1451 V.1.0. polynominal which describes the complex transfer function.
Re-mapping to IEEE 1451 V.1.0 is available for all Brüel & Kjær TEDS Templates
transducers as part of after sales support. Relevant The TEDS template defines the memory mapping of the
Brüel & Kjær hardware (PULSE, NEXUS, etc.) support both TEDS chip and hence the “understanding” between transducer
the proposed and final version of the standard, and in and front-end.
many applications the user will not notice a difference be-
tween the two standards. The major difference between A number of TEDS templates have been standardised by
the proposed and final version concerns the memory map. the IEEE and in addition to this a number of non-standard
In the proposed version, all data is in a R/W area of the vendor specific templates exist. The different TEDS templates
memory, while in V.1.0 some permanent data (manufacturer, are differentiated by different ID numbers. At the moment
etc.) has been moved to a write once area of the memory. Brüel&Kjær uses the following templates for TEDS microphones
This leaves more space in the so-called user area of the and pre-amplifiers:
memory.
IEEE P1451.4 Beta – TEDS Templates

UTID No. Name Remarks
Used for Array Microphones Types 4935 and

34013408 Microphone with integrated preamplifier
4951. This template is with transfer function
IEEE P1451.4 V.0.9 – TEDS Templates

UTID No. Name Remarks
769 Microphone, integrated preamplifier Used for most TEDS microphones
1025 Microphone Preamplifier Used for most TEDS microphone preamplifiers
Microphone, integrated preamplifier, extended Used in special cases like low-sensitivity microphones
116289
sensitivity or reference frequency not 250 Hz
IEEE 1451.4 V.1.0 – TEDS Templates

UDID No. Name Remarks
This template is without transfer function

I27-0-0-0U Microphone with integrated preamplifier, V.1.0
Replaces UTID 769 and 116289
Same as UDID 127-0-0-0U but with transfer function

Microphone with integrated preamplifier, transfer
I27-0-0-1U
function, V.1.0
Replaces UTID 34013408

1/2-inch Microphones
Type Number 4188-A-021 4188-A-031 4188-B/C/L-001 4189-A-021 4189-A-031 4189-B/C/L-001
Optimised Free-field Free-field Free-field Free-field Free-field Free-field
Nominal Sensitivity mV/Pa 31.6 31.6 31.6 50 50 50
Polarization Voltage* V DeltaTron DeltaTron 0 DeltaTron DeltaTron 0
Optimised Frequency Response ±2 dB Hz 20 to 12500 20 to 12500 8 to 12500 20 to 20000 20 to 20000 6.3 to 20000
Dynamic Range of TEDS Microphone dB(A) to dB 19 to 141 21 to 138 15.8 to 146 16.5 to 138 18 to 134 15.2 to 146
Preamplifier Included 2671 2699 2669B/C/L 2671 2699 2669B/C/L
Adaptor Included – – – – – –
TEDS UTID 769 116289 769 769 116289 769
Connector BNC BNC LEMO BNC BNC LEMO
* 0 V = Prepolarized Microphone
Type Number 4189-A-022 4190-B/C/L-001 4190-L-002 4191-B/C/L-001 4192-B/C/L-001 4193-B/C/L-004
Optimised Free-field Free-field Free-field Free-field Pressure-field Low-frequency
Nominal Sensitivity mV/Pa 50 50 50 12.5 12.5 1.9
Polarization Voltage* V 0 200 200 200 200 200
Optimised Frequency Response ±2 dB Hz 20 to 20000 3.15 to 20000 3.15 to 20000 3.15 to 40000 3.15 to 20000 0.16 to 20000
Dynamic Range of TEDS Microphone dB(A) to dB 18 to 134 15 to 147 15 to 147 21.4 to 161 20.7 to 161 26 to 148
Preamplifier Included 2671 2669 B/C/L 2669-L 2669 B/C/L 2669 B/C/L 2669 B/C/L
Adaptor Included UA-1260 – UA-1260 – – UC 0211
TEDS UTID 769 769 769 769 769 769
Connector BNC LEMO LEMO LEMO LEMO LEMO
Type Number 4955 4942-A-021 4942-A-031 4942-B/C/L-001 4943-B/C/L-001
Optimised Free-field Diffuse-field Diffuse-field Diffuse-field Diffuse-field
Nominal Sensitivity mV/Pa 1100 50 50 50 50
Polarization Voltage* V 200 DeltaTron DeltaTron 0 200
5 to 20000
Optimised Frequency Response ±2 dB Hz 20 to 16000 20 to 16000 6.3 to 16000 3.15 to 10000
(±3 dB)
Dynamic Range of TEDS Microphone dB(A) to dB 6.5 to 110 16.5 to 138 18 to 134 15.2 to 146 15 to 147
Preamplifier Included Yes 2671 2699 2669 B/C/L 2669 B/C/L
Adaptor Included – – – – –
TEDS UTID 116289 769 116289 769 769
Connector LEMO BNC BNC LEMO LEMO
Type Number 4938-A-011 4938-B/C/L-002 4939-A-011 4941-A-011 4941-B/C/L-002 4944-A
Optimised Pressure-field Pressure-field Free-field High-pressure High-pressure Pressure
Nominal Sensitivity mV/Pa 1.6 1.4 4 0.08 0.07 0.9
Polarization Voltage* V 200 200 200 200 200 0
Optimised Frequency Response ±2 dB Hz 4 to 70000 4 to 70000 4 to 100000 4 to 20000 4 to 20000 16 to 170000
Dynamic Range of TEDS Microphone dB(A) to dB 42 to 172 42 to 172 35 to 164 73.5 to 184 75.8 to 184 48 to 169
Preamplifier Included 2670 2669 B/C/L 2670 2670 2669 B/C/L DeltaTron
Adaptor Included – UA 0035 – – UA 0035 –
TEDS UTID 769 769 769 116289 116289 769
Connector LEMO LEMO LEMO LEMO LEMO SMB**
** Optionally available with 10–32 UNF socket
Type Number 4954-A 4957 4958
Optimised Free-field Array Array
Nominal Sensitivity mV/Pa 2.8 17 17
Optimised Frequency Response ±2 dB Hz 16 to 80000 50 to 10000 20 to 20000
Dynamic Range with Preamplifier Type dB(A) to dB 40 to 164 30 to 140 30 to 140
Preamplifier Included DeltaTron DeltaTron DeltaTron
Adaptor Included – – –
TEDS UTID 769 I27-0-0-0U I27-0-0-1U
Connector SMB** SMB** SMB**
** Optionally available with 10 – 32 UNF socket
Type Number 4138-A-015 4138-B/C/L-001
Optimised Pressure-field Pressure-field
Nominal Sensitivity mV/Pa 0.6 0.8
Polarization Voltage* V 200 200
Optimised Frequency Response ±2 dB Hz 6.5 to 140000 6.5 to 140000
Dynamic Range of TEDS Microphone dB(A) to dB 52.2 to 168 55 to 168
Preamplifier Included 2670 2669 B/C/L
Adaptor Included UA 0160 UA 0036
TEDS UTID 769 769
Connector LEMO LEMO

MICROPHONE PREAMPLIFIERS
A condenser microphone must be combined with a pream- The DeltaTron Preamplifier
plifier to provide impedance conversion, some filtering,
and the capability to drive relatively long cables without Despite its origin in the vibration transducer world, the
significant signal degradation. Constant Current Line Drive (CCLD) principle is gaining in-
creasing popularity also in a wide area of sound and meas-
Preamplifiers are designed in accordance with two different urement applications.
principles here denoted as:
Different manufacturers market transducers using the
• The classical preamplifier CCLD principle under different names, the Brüel & Kjær
• The DeltaTron preamplifier name being DeltaTron. The benefit of the DeltaTron principle
is that one and the same wire is used for both the signal
and the supply current! Using TEDS Class I even the TEDS
Each has its own special features. data can be transmitted over that same wire (using a level
controlled electronic switch as shown in the figure below).
The Classical Preamplifier
Class I TEDS as used in a DeltaTron TEDS microphone
Class II TEDS as used in a TEDS microphone
7-pin LEMO
1 CIC Signal CCLD
2 GND Signal
3 Pol Voltage
4 Signal
TEDS TEDS
TEDS 5 TEDS Data
+V cc 6 +V cc Typical Class --l TEDS DeltaTron

Microphone Input
060215
-V cc 7 -V cc
– TEDS
Typical Class ll Classical Microphone
–
Microphone Input This opens for the use of cost-effectivecoaxial cables and
060214
BNC connectors as known from general T&M applications.
The classical preamplifier has an easy to understand concept. A DeltaTron input can be connected to microphones as
It is basically a unity gain amplifier with extremely high well as vibration sensors (and many other sensors with
input impedance and very low input capacitance. CCLD output).
The supply voltage can be either ±15 V DC or a single Due to the working principle the signal is superimposed
120 V DC. on a DC voltage. This DC bias voltage is typically around
12 V. Bias drift (over temperature or time) will reduce the
The output signal has its own separate wire, as do the dynamic range.
polarization and CIC voltage.
Due to the lower DC supply voltage (typically 20 – 28 V DC
Pin 5 is often used for transmission of TEDS data (so called compliance voltage out of the front-end), there is some
Class II TEDS) limitation in the upper limit for a DeltaTron solution. Another
limitation of DeltaTron solution is that only pre-polarized
CIC (Charge Injection Calibration) is possible by injecting a microphones can be used and that CIC is not available.
signal (on pin 1 of the LEMO connector).
www.bksv.com Microphone Preamplifiers 21

However in many practical applications this is happily Type 2670 ¼″ preamplifiers are available in different versions
accepted in order to get the benefits DeltaTron solutions, each with their own special features.
that is, ease of use and cheap cables!
When sold alone most preamplifiers are supplied with the
The size of the DC bias voltage is often used by the front- TEDS Template UTID 1025. When sold as part of a TEDS
end to provide some simple means of cable monitoring. A microphone the template UTID 769 or 116289 is used.
bias voltage below a certain value is interpreted as short
circuit while a DC value above a certain value is interpret- For tables please see overleaf.
ed as open circuit.
Classical Versus DeltaTron Preamplifiers Replacing Discontinued Brüel & Kjær

Classical DeltaTron Preamplifiers
Output Voltage 55 Vp 7 Vp
Output Current 2 – 20 mA 3 – 20 mA Modern (Falcon Range) preamplifiers have several advantages
Noise <2 μV 4 μV over the older types, for example, with respect to parameters,
Distortion <–80 dB <–70 dB such as settling time, noise immunity, physical size and
Verification CIC/IVC No connectors.
IEEE 1451.4 Yes Yes
Cable Price Higher Lower The table below can be helpful if you need a replacement
Connector LEMO BNC for an older Brüel & Kjær type.
Prepolarized
Microphone Type Both
only Recommended
Older
Accelerometer Conditioning No Yes Replacement
Preamplifier
Preamplifier
Type
Type
Brüel & Kjær Range of Microphone 2619 2669

2627 2673
Preamplifiers 2633 2670
2639 2669
We offer a large selection of robust and acoustically optimised 2645 2673
preamplifiers that allow operation in a wide range of envi-
ronmental conditions. The high output current capability
of Brüel & Kjær preamplifiers allows the use of extremely
long cables, even with high sound pressure levels present
at high frequencies.
Preamplifiers are available in both ½″ and ¼″ dimensions

for direct fit with the most used microphone cartridge sizes.
For 1″ and 1/8″ cartridge adaptors are available.
The most popular classical ½″ preamplifier is Type 2669

which is available in several different versions. When insert
voltage calibration is required, Type 2673 is the obvious
choice.
Type 2695, maybe due to its small size (half the length of
the extremely popular DeltaTron preamplifier Type 2671),
is an often overlooked unit.
Type 2699 combines a DeltaTron preamplifier and an A-

weighting filter in one unit. This type can be easily distin-
guished from other preamplifiers due to the two engraved
rings.

2669B/L 2670/2670 WB-1419
2669C 2670-W-001
Type Number 2669-B 2669-L 2669 - 2669-001 2670 2670-W-001

Diameter inch 1/2 1/2 1/2 1/2 1/4 1/4
Optimised Acoustical Acoustical Cylindrical For 4232 only Phase Short, 48 mm
Connector at Preamplifier LEMO 0B, 7-pin LEMO 0B, 7-pin LEMO 1B, 7-pin LEMO 1B, 7-pin Fixed (2 m) Fixed (0.6 m)
0.6 m cable
Connector at Instrument/Cable B&K, 7-pin LEMO 1B, 7-pin None None LEMO 1B, 7-pin with LEMO 1B,
7-pin
Calibration Facility CIC CIC CIC CIC CIC CIC
Polarization Voltage Support Yes Yes Yes Yes Yes Yes
± 14 to ± 60 ± 14 to ± 60 ± 14 to ± 60 ± 14 to ± 60 ± 14 to ± 60 ± 5 to ± 20
Supply Voltage V
or 28 to 120 or 28 to 120 or 28 to 120 or 28 to 120 or 28 to 120 or 10 to 40*
55 55 55 55 55
Max. Output Voltage (Peak) V (10 below (10 below (10 below (10 below (10 below 15
supply) supply) supply) supply) supply)
Max. Output Current (Peak) mA 20 20 20 20 20 17
3 to 200000 3 to 200000 3 to 200000 3 to 200000 15 to 200000 15 to 200000
Frequency Range Hz
± 0.5 dB (15 pF) ± 0.5 dB (15 pF) ± 0.5 dB (15 pF) ± 0.5 dB (15 pF) ± 0.5 dB (6.2 pF) ± 0.5 dB (6.2 pF)
Attenuation dB < 0.35 < 0.35 < 0.35 < 0.35 < 0.4 < 0.4
Noise A-weighted, typical μV 1.9 1.9 1.9 1.9 4 4
Noise 22.4 Hz to 300 kHz, typical μV 8.2 8.2 8.2 8.2 14 14
Input Impedance GΩ||pF 15 ||0.3 15||0.3 15||0.3 15||0.3 15||0.25 15||0.25
1025 from 1025 from 1025 from 1025 from 1025 from
TEDS UTID serial number serial number serial number serial number serial number No
2221155 2221155 2221155 2221155 2248944
* Note: The warranty does not cover Preamplifier 2670-W-001 if used at a supply voltage >40 V

2671 2670/2670 WB-1419
2695
2699
2673
Type Number 2670-WB-1419 2671 2671-W-001 2673 2695 2699

Diameter inch 1/4 1/2 1/2 1/2 1/2 1/2
Short
Optimised Airbag DeltaTron DeltaTron Calibration DeltaTron
DeltaTron
Fixed (2 m)
Connector at Preamplifier BNC BNC LEMO 0B, 7-pin 10– 32 UNF BNC
cable
Connector at Instrument Cable LEMO 1B, 7-pin N/A None LEMO 1B, 7-pin N/A N/A
Calibration Facility None None None LEMO 0B, 7-pin 10– 32 UNF BNC
Polarization Voltage Support Yes No No Yes No No
±14 to ± 60 ± 14 to 60
Supply Voltage V 28 28 28 28
or 28 to 120 or 28 to 120
55 55
Max. Output Voltage (Peak) V (10 below 7 7 (10 V below 7 7
supply) supply)
Max. Output Current (Peak) mA 20 19 19 19 19 18
1 to 100000 20 to 50000 3 to 50000 3 to 200000 20 to 50000 A-weighted to
Frequency Range Hz
± 1 dB (6.2 pF) ± 2 dB (12 pF) 2 dB (12 pF) ± 0.5 dB (20 pF) ±2 dB (15 pF) IEC61672 Class 1
0 ±0.3 dB at
Attenuation dB 11 < 0.35 <0.35 < 0.05 < 0.2
1 kHz
Noise A-weighted, Typical μV 4 4 2 1.8 4 8 Max., LIN
Noise 22.4 Hz to 300 kHz, Typical μV 14 15 4 11 12 N/A
10
Input Impedance GΩ||pF 15||15 1.5||0.4 10||0.4 1||0.05 1.7||0.4
+20 – 40%||0.5
1025 from 1025 from 1025 from
102 ref. freq.
TEDS UTID serial number serial number serial number No 1025
1000 Hz
2264319 2264319 2221155

2660
Type Number 2660 2660-W-001

Diameter inch 1/2 and 1/1 1/2
Optimised Low-noise Low-noise
Connector at Preamplifier None None
Connector at Instrument/Cable B&K, 7-pin B&K, 7-pin
Calibration Facility None None
Polarization Voltage Support Yes Yes
Supply Voltage V 120 and 12 ±14 to ±16 V
Max. Output Voltage (Peak) V 45 4
Max. Output Current (Peak) mA 1.5 1.5
20 to 200000 20 to 200000
Frequency Range Hz ± 1 dB ± 1 dB
(0 dB)(47 pF) (0 dB)(47 pF)
Attenuation dB < 0.06 < 0.06
Noise A-weighted, typical μV 0.8 0.8
Noise 22.4 Hz to 300 kHz, typical μV 5 5
Input Impedance GΩ||pF 36||0.3 36||0.3
TEDS UTID No No

Microphone Verification and Calibration
Charge Injection Calibration (CIC)
1
This is a Brüel & Kjær patented method for in-situ verification
of the integrity of the entire measurement chain, for Cc
example, microphone, preamplifier and cabling. Even mi-
crophones remote from the input stage/conditioning amplifier g 4
Microphone
can be verified. The basic philosophy behind CIC is that if Cc
Mcic = 20 log
we have a known condition (for example, a properly cali- 16pF Cm Cm + Ci + Cc
brated microphone) and establish a reference measurement,
then as long as the reference value does not change,
nothing has changed and the microphone calibration will
still be valid. Additionally CIC verifies the cable and pream- Ci
2
plifier. Furthermore, if an error occurs, then the change in
LEMO Connector
the CIC signal will very often clearly indicate which kind of
060183
problem causes the error.
The CIC technique is a great improvement over the tradi- How to Perform CIC
tional insert voltage calibration method which virtually
The CIC method can be used to monitor the measurement
ignores the state of the microphone. The CIC technique is
system at all frequencies covered by the system.
very sensitive to any change in the microphone’s capacitance,
which is a reliable indicator of the microphone’s condition.
Use low frequencies to observe changes in the preamplifier
input resistance or additional leakage.
The technique works by introducing a small but accurately
defined capacitance Cc (typically 0.2 pF) with a very high
Use the mid-frequency range, for example, around 1 kHz
leakage resistance (greater than 50000 GΩ) into the circuit
to check for changes to the microphone capacitance. The
of the preamplifier, see figure. Ci and Ri represent the
CIC output is essentially inversely proportional to the mi-
preamplifier’s high input impedance and g its gain (= 1).
crophone capacitance.
For a given calibration signal ei, the output eo of this ar-
Check the high-frequency attenuation (above 10 kHz) to
rangement will change considerably, even for small changes
monitor for changes in the microphone resonance.
in the microphone’s capacitance Cm. The CIC technique is
about 100 times more sensitive than the insert voltage cali-
bration. In the extreme case where there is a significant When can CIC be used?
leakage between the microphone’s diaphragm and its back CIC requires use of a preamplifier and a cable which supports
plate (Cm becomes very large), the output signal will CIC plus a front-end input which allows CIC measurement.
change by tens of decibels compared with only tenths of a If the power supply does not support CIC, Brüel & Kjær can
decibel using the insert voltage method. supply adaptors to inject the CIC signal; use WB-0850 for a
Brüel & Kjær connector and UA-1405 for a LEMO connector.
Another important CIC feature is that, unlike the insert Presently CIC is not possible when using preamplifiers with
voltage technique, it is far less sensitive to external electrical DeltaTron output.
fields.
The Brüel & Kjær PULSE Multi-analyzer and the NEXUS range
of conditioning amplifiers support CIC for the microphone
Insert Voltage Calibration (IVC)
inputs.
This method was originally developed for calibration of
the open-circuit voltage sensitivity of microphones and, for
this purpose, it is still the best method. IVC requires a special Calibration
preamplifier and will not detect microphone changes as The microphone and the entire measurement chain must
easily as the CIC method. be calibrated at regular intervals. The calibration provides
traceability and proven accuracy to your system. The intention
behind CIC is not to replace the calibration but to enable
you to extend the calibration interval.

SOUND INTENSITY
The measurement of sound intensity provides information
on the magnitude and the direction of the sound energy
in the sound field. The measurement technique is used for
a variety of applications such as the determination of
sound power, sound absorption and sound transmission.
Sound intensity is calculated from the quotient of the
sound pressure and the particle velocity; sound pressure
can easily be measured directly but the particle velocity is
usually determined by a finite difference approximation.
This requires two phase matched microphones in a face-to-face
configuration. Brüel & Kjær provides a number of sound
intensity probes that conform to Class 1 in the Sound Intensity
Instrumentation Standard, IEC 61043, which describes the
characteristics of microphone pairs, intensity probes and
calibration techniques for intensity measurements.
Sound Intensity Probes

Two sound intensity probes are available – Type 3595 for bling system whereas Type 3599 is based on an 18-pin ca-
use with the sound intensity analysis system based on bling system and includes a remote control unit. The
sound level meter Type 2260, and Type 3599, suitable for acoustical specifications are the same as both use Sound
use with sound intensity analyzers based on PULSE. The Intensity 1/2-inch Microphone Pair Type 4197 and Dual
main difference is that Type 3595 is based on a 10-pin ca- Preamplifier Type 2683.
IEC 61043 IEC 61043

Standards
Class 1 Class 1
Microphones 4197 4197
Dual Preamplifier 2683 2683
Remote Control Unit – ZH-0632
Spacer Length 6 to 200 mm 6 to 200 mm
8.5 mm Spacer 8.5 mm Spacer

250 Hz to 250 Hz to
6.3 kHz 6.3 kHz
Spacers Included 12 mm Spacer 12 mm Spacer 3595 3599

250 Hz to 5 kHz 250 Hz to 5 kHz
50 mm Spacer 50 mm Spacer
20 Hz to 20 Hz to
1.25 kHz 1.25 kHz
www.bksv.com Sound Intensity 27

Sound Intensity Microphone Pairs

Diameter inch 1/2 1/4
Free-field Frequency
Hz 5 to 12500 6 to 14000
Response ±1 dB
Free-field Frequency
Hz 0.3 to 20000 4 to 100000
Response ±2 dB
Phase Response Difference < 0.05°: 20 Hz to

250 Hz 1 kHz – 20 kHz:
(Absolute Value)
1/3-octave Centre < f(Hz)/5000:
250 Hz to ±0.1° × f [kHz]
Frequencies 6.3 kHz
< 0.2 dB: 20 Hz < 0.3 dB: 100 Hz
Amplitude Response to 1 kHz to 10 kHz
Difference Normalized at
200 Hz < 0.4 dB: 20 Hz < 0.5 dB: 100 Hz
to 7.1 kHz to 20 kHz
8.5 mm Spacer
UC-5349 6 mm Spacer
12 mm Spacer UC-0196
Accessories Included UC-5269 12 mm Spacer
50 mm Spacer UC-0195
UC-5270
Polarized Capacity
pF <1.0 <0.3
Difference
Dual Preamplifier
Type Number 2683

< 0.015°at 50 Hz (20pF mic.
Phase Matching capacitance)
f(kHz) × 0.06°: 250 Hz to 10 kHz
Electrical Noise re Microphone
Sensitivity:
1/4-inch 6.4 pF Dummy 39.2 dB SPL(A)
1/2-inch 19.5 pF Dummy 19.4 dB SPL(A)
Attenuation for 1/2-inch
Ch.A Typ.: 0.6 dB, Ch.B Typ.: 0.3 dB
Microphones
Attenuation for 1/4-inch
Ch.A Typ.: 1.7 dB, Ch.B Typ.: 0.7 dB
Microphones

Sound Intensity Calibrators
Requirements for laboratory and field use are different. 4297 for field use. Both calibrators fulfil IEC 61043, 1993
Brüel & Kjær, therefore, offers two instruments for sound Class 1.
intensity calibration; Type 3451 for laboratory use and Type
Comparison of Sound Intensity Calibrators

In the
Main Application In the field
laboratory
Unnecessary
Dismantling of Probe Necessary
(up to 3 kHz)
Calibration of Sound Intensity Level LI Yes No
Calibration of Sound Pressure Level Lp Yes Yes
Calibration of Particle Velocity Level Lv Yes No
20 to 3 kHz
with spacer
Pressure-Residual Intensity Index Lp – LI 20 to 5 kHz
20 to 6.3 kHz
without spacer
Irrelevant as
Probe must be
spacer must be
Spacings Accommodated based on
removed from
12 mm spacer
probe
3541
Separate pis-
Sound Pressure Source Integrated
tonphone
Separate pink
Integrated pink
and white
Noise Generator noise genera-
noise genera-
tor 4297
tor
Microphones Accomodated inch 1/4 and 1/2 1/2
Number of Mechanical Parts 4 1
www.bksv.com Sound Intensity 29

MICROPHONE & PREAMPLIFIER EXTENSION CABLES
The best connection between A and B is a cable from Generally the order number is:
Brüel & Kjær. A quality cable is so much more than just an
AO-XXXX-Y-ZZZ
electrical connection between two points. Cables from
Brüel & Kjær are carefully selected and designed in order to where:
offer excellent electrical properties such as high screening • AO-XXXX is the basic cable type
and low capacitance combined with maximum strength • Y defines the length unit: Y = D (decimetre), Y = M
and flexibility for easy handling. (metres)
• Z is the length value
The preferred length for many extension cables is 3, 10 or
30m, but nearly all Brüel&Kjær cables are available in customer For example, a 3 m long AO-0414 cable has order number:
specific lengths. The ordering system follows a simple yet
flexible structure. Up to 99.9 m, the cable length can be AO-0414-D-030
specified in tenths of a meter (decimetre) and from 100 m corresponding to a length of 30 decimetres.
in steps of 1 m.
A 100 m long AO-0414 cable has order number:
AO-0414-M-100
Part No. Connector A Connector B Raw Cable Description
AO-0414 LEMO 1B, LEMO 1B, Male AC-0289 Most popular extension able for
Female classical preamplifier and micro-
phone input. Also fits directly in
preamplifiers with cylindrical
houses.
PUR cable
–20 to +80°C
AO-0419 LEMO 0B, LEMO 1B, Male AC-0219 Preamplifier Cable
Female
Silicone Cable
–60 to +150°C
Suits only 2669 and 2673 with

conical house
AO-0428 LEMO 0B, 7-pin B&K, AC-0219 From present classical preamplifier
Female Male with conical house to B&K input
Silicone cable
–60 to +150°C
AO-0027 7-pin B&K, 7-pin B&K, AC-0289 From old Brüel&Kjær preamplifier
Female Male to B&K input. Single-screened
PUR cable
–20 to +80°C

AO-0028 7-pin B&K, 7-pin B&K, Double- As AO-0027 but with double-
Female Male screened screened cable
AC-3028
AO-0488 7-pin B&K, LEMO 1B, Male AC-0289 Connects older Brüel & Kjær sys-
Female tems to modern input
PUR cable
–20 to +80°C
AO-0645 LEMO 1B, LEMO 1B, 10- AC-0289 Connects classical microphone
Female pin, Male preamplifiers to SLM and other
input (2250/60 and 3639)
PUR cable
–20 to +80°C
AO-0479 LEMO 1B, Male BNC AC-0289 Microphone front-end input

cable
Only LEMO pin 2 and 4 are con-

nected to BNC, LEMO pin 2 is
GND
PUR cable
–20 to +80°C
AO-0537 7-pin B&K, LEMO 1B, Male AC-0289 Adaptor cable – use only with
Female 2633 and 2639
PUR cable
–20 to +80°C
www.bksv.com Microphone & Preamplifier Extension Cables 31

AO-0463 10–32 UNF 10–32 UNF AC-0208 Economy cable
PVC
–20 to +70°C
AO-0563 SMB (right SMB (right RG-174 When you need SMB in both
angle) angle) ends
–10 to +80°C
AO-0564 SMB (right BNC RG-174 Where space is limited

angle SMB and BNC
–10 to +80°C
AO-0587 SMB BNC AC-0208 For use with array microphones
PVC cable
–20 to +70°C
AO-0687 10–32 UNF 10–32 UNF AC-0005 Super Cable with extensive
connector relief
PFA cable
–40 to +120°C
AO-0087 BNC BNC RG-58/U General purpose coaxial cable

with BNC
50 Ω
AO-0426 BNC BNC RG-223/U (Dou- General purpose coaxial cable
ble-screened) with BNC, double-screened
50 Ω
AO-0531 10–32 UNF BNC AC-0208 For surface microphones or

1/4-inch TEDS microphones with
10–32 UNF
PVC cable
–20 to +70°C

AR-0014 LEMO 1B, F LEMO 1B, M Shielded flat Signal routing through closed
cable doors and windows
0.2 mm thick
WL-1287 LEMO 1B, LEMO 1B,10- AC-0289 Connects 4182 to 2250/60, etc.,
Female pin, M SLM input
PUR cable
–20 to +80°C
WL-1302 7-pin B&K LEMO 1B, Male AC-0289 Adaptor cable, 2660-W-001 to
PULSE/NEXUS
Maximum ±16 V DC supply
PUR cable
–20 to +80°
EL-4025 LEMO 1B, B&K 7-pin, Connection cable for 5935-L

Female Female
Raw Cables
This table provides information about the raw cables used the temperature range for a cable with connectors can be
for a number of Brüel & Kjær extension cables. Note that limited compared with the specifications for the raw cable.
Temperature Centre Impedance

Raw Cable Cable, ∅ mm Jacket Colour pF/m Description
Range, °C Conductor Ohms
Silver-plated Special cable with low tri-
AC-0005 2 PFA Black –75 to +250 50 105
Steel boelectric noise
Special braided shield micro-
AC-0079 4 PUR Grey –30 to +90 7∗0.10 mm2 95...115
phone cable
Single screen type RG-58/U
RG-58/U 4.95 PVC Black –25 to +170 19∗0.1 cm 50 101
coaxial cable
Single screen highly flexible,
AC-0208 2 PVC Grey –20 to +70
low-cost, thin, coaxial cable
AC-0219 4 Silicone Grey –50 to +150 7∗0.06 mm2 90
phone cable
AC-0289 4.2 PUR Black, dull –30 to +70 10∗0.04mm2 95
phone cable
Double braided shield type
RG-223/U 5.38 PVC Black –35 to +70 0.9 cm 50 101
RG-233/U coaxial cable

Cable Length and Current Limitation in Preamplifiers
Brüel & Kjær preamplifiers can drive very long cables. The Example 2
cable length is limited though by the available output current Using a PULSE Dyn-X module with ½-inch Microphone
of the preamplifier, especially in situations where high frequency Preamplifier Type 2669, a ½-inch Free-field Microphone
signals must be measured at high levels. Type 4191 and 1000 m of 95 pF/m cable:
ipeak = 20 mA – 3 mA = 17 mA
The maximum sound pressure level (Lp,peak) which can be
measured with the combination of available current, cable
CL = 95 pF/m × 1000 m = 95 nF
load, frequency content of signal and microphone sensitivity
can be calculated with the following expression:
Sc = 12.5 mV/Pa
⎛ i peak ⎞
L p, peak = 94 + 20 log ⎜ ----------------------------------------------------------------⎟ [ dB ] fmax = 20000 Hz
⎝ 2 ⋅ π ⋅ f max ⋅ C L ⋅ 1Pa ⋅ S c⎠
L p, peak = 94 + 20 log ⎛ ---------------------------------------------------------------------------------------------------⎞ = 135dB
0.017
where: ⎝ –9 ⎠
2 ⋅ π ⋅ 20000 ⋅ 95 ⋅ 10 ⋅ 1Pa ⋅ 0.0125
ipeak = maximum available peak current, either the pream- Note: The maximum peak sound pressure level for shorter
plifiers maximum output current or the supply current minus cables may be limited by the available voltage and the
the preamplifier’s current consumption, whichever is the preamplifiers maximum slew rate. Further details about
smallest the limitations due to voltage, current, and slew rate of
the preamplifiers can be found in Brüel & Kjær’s Micro-
fmax = maximum frequency in the signal phone Handbook.
CL = total capacitative load presented by the connection

cable in farad (F). The load is calculated by multiplying the
cable length in metres with the cable capacitance in F per
metre
Sc = loaded sensitivity of the microphone in V/Pa (Nominal

Sensitivity)
The following examples illustrate the use of the above

equation.
Example 1
Using a PULSE Dyn-X module with DeltaTron® Microphone
Preamplifier Type 2671, a Prepolarized Free-field, ½-inch
Microphone Type 4188 and 100 m of 95 pF/m cable:
ipeak = 4 mA – 1 mA = 3 mA
CL = 95 pF/m × 100 m = 9.5 nF
Sc = 31.6 mV/Pa
fmax = 10000 Hz
L p, peak = 94 + 20 log ⎛ -----------------------------------------------------------------------------------------------------⎞ = 138dB

0.003
⎝ –9 ⎠
2 ⋅ π ⋅ 10000 ⋅ 9.5 ⋅ 10 ⋅ 1Pa ⋅ 0.0316

Popular Connectors Used in Acoustic Measurements
Older Brüel & Kjær equipment traditionally used proprietary so-called B&K
coaxial connectors (JP-0101) and the famous B&K 7-pin microphone plugs for
the preamplifier input.
Due to the long lifetime and high stability of Brüel&Kjær instruments, thousands
of instruments using these traditional connectors are still on the market, and
we still supply extension cables and adaptors that connect these instruments JP-0101
to newer types of transducers. 7-pin microphone preamplifier
plug (male)
Eventually, these older connectors were replaced by the LEMO 7-pin connector
(for classical microphone input), and the industry standard BNC connector for
signal input/output. BNC connectors are also a popular choice for DeltaTron
preamplifiers.
Another popular coaxial connector (originating from the vibration world) is

the 10 – 32 UNF, also called the “Microdot” connector. The 10 – 32 UNF is espe-
cially popular where vibrations can be expected, while the SMB type connectors
JP-0035 LEMO 7-pin
are often encountered in multi-hannel systems, where space around the con-
nector is limited, for example, in array-solutions.
For an overview of the range of different adaptors please see the “Accessories”
section.

MICROPHONE ACCESSORIES
Adaptors
Adaptors for Mounting Preamplifiers and Extension
Rods with Microphones of Different Diameters
1/1-inch microphone to 1/2-inch
UA-0786
preamplifier, Insert Voltage possibility
DB-0375
preamplifier
UA-0035 UA-0786 DB-0375 UA-0035 WA-0371
preamplifier (driven shield 0.33 pF)
WA-0371 preamplifier, short version (driven
shield 0.08 pF)
1/8-inch microphone to 1/2-inch UA-0036 UA-0160
UA-0036
UA-0160
Flexible Adaptors 1/4- to 1/2- inch and Flush Mountings
for 1/4- and 1/2-inch Microphones
UA-0122 Right angle (driven shield 1.25 pF)
UA-0123 Straight (driven shield 1.25 pF) UA-0122 UA-0123
Flexible Extension Rod
1/2-inch to 1/2-inch 210 mm (driven
UA-0196
shield 0.22 pF)
Angle Adaptors
1/4-inch to 1/4-inch (driven shield
EU-4000 UA-0196 UA-1260 EU-4000
0.97 pF) 90°
1/2-inch to 1/2-inch (80° approxi-
UA-1260
mately)

Windscreens
The windscreen is made of specially prepared, open-pored sound measurements. The windscreen is simply pushed as
polyurethane foam attenuating wind noise 10 to 12 dB at far as it will go over the microphone (fitted with its normal
lower wind velocities, and is suited for hand-held outdoor protection grid) and preamplifier.
Windscreen Order Numbers

UA-1070 Windscreen for 4184
UA-1071 Windscreen holder for 4184
For 1-inch microphones, spheri-
UA-0207
cal, diameter 90 mm, hole 20 mm
For 1/2-inch microphones, spheri-
UA-0237
UA-0253 6 units of UA-0207
UA-0459
Type 4952. Upper part with
UA-1679
windscreen
UA-1700 Windscreen for Type 4952
UA-1701 6 units of UA-1700 units
WQ-1099 UA-1700 UA-0207 UA-0459 WQ-1133 UA-1070
UA-0237 WA-1099
For 1/4-inch microphones, ellipse
WQ-1133
38 × 55 mm, hole 5 mm
Windscreen for Type 4198/
DS-0394
UA-1404
www.bksv.com Microphone Accessories 37

Nose Cones
Nose cones are designed to reduce the aerodynamically induced the least possible resistance to air flow and thereby reducing
noise present when the microphone is exposed to high the noise produced by the presence of the microphone itself.
wind speeds in a known direction, for example, during The fine wire mesh around the nose cone permits sound
sound measurements in wind tunnels, ducts, etc. They replace pressure transmission to the microphone diaphragm while
the normal protection grid of the microphone, and have a a truncated cone behind the mesh reduces the air volume
streamlined shape with a highly polished surface giving in front of the diaphragm.
Nose Cone Order Numbers

UA-0387: 1/1-inch
UA-0386: 1/2-inch
UA-0385: 1/4-inch
UA-0355: 1/8-inch
UA-0387 UA-0386 UA-0385 UA-0355
Turbulence Screen
Turbulence Screen UA-0436 is designed to attenuate turbu- free-field condenser microphone mounted on a 1/2-inch
lence noise when measuring airborne noise in ducts, wind microphone preamplifier.
tunnels etc. The UA-0436 can be used with any 1/2-inch
UA-0436 For suppression of turbulence during

noise measurements with 1/2-inch
microphones inside air ducts

Outdoor Protection
UA-1404 Outdoor Microphone Kit for Pream-
plifiers 2669, 2671, 2673 and Sound
Level Meters 2236, 2237, 2238, 2239
DB-3611 Extension for UA-1404 – makes it
possible to mount the preamplifier
from Sound Level Meter Type 2231
UA-0308 Dehumidifier used with back-vented
1/2-inch microphones with nickel dia-
phragms
UA-0393 Rain cover with built in actuator
Upper Part with Integral Windscreen UA-1404 UA-0308

UA-1679 DB-3611
Windscreen Holder with bird spike

UC-5360
for 4198/UA-1404
Preamplifier Holders
Preamplifier Holders Order Numbers
UA-1317 Preamplifier Holder to be used with
1/2-inch preamplifiers together with
a camera tripod. The holder can be
swivelled and locked at any angle
between +90° and –90° from the
vertical
UA-1588 Preamplifier Holder to be used with
1/4-inch preamplifiers together with
a camera tripod (for example, UA-1317)
UA-0588 Microphone Holder for Tripod (2671,

2669-C SLM preamplifiers)
UA-1284 Microphone Stand for 2669-B/L

UA-1317 UA-1588 UA-0588 UA-1284
Corrector
DZ-9566 Random Incidence Corrector gives Types 4176/4188 a
flat random response for measurements in diffuse
sound fields

Tripods
UA-0587 Heavy Duty Tripod for Type 3923
Rotating Boom, max. height 1.46 m
UA-0801 Lightweight Tripod with tilt head,
max.1332 mm
UA-0803 Tripod for photocells and micro-
phones, max. 1250 mm
UA-0989 Tripod with pan and tilt head for
Type 8329
UA-1251 Lightweight Tripod for Type 2236,
compact, max. height 1.22 m
UA-1577 Tripod including CAM head
UA-1707 Tripod Adaptor for Type 4952
Electrostatic Actuators
UA-0023 For 1-inch microphones
UA-0033 For 1/2-inch microphones
For calibration of Surface
UA-1639 Microphones
Actuator Adaptors
DB-0264 For 1/4-inch microphones, use with
UA-0033
DB-0900 For 1/8-inch microphones, use with UA-0023 UA-0033 UA-1639 DB-0264 DB-0900
UA-0033
Adaptors for Calibration

DP-0776 Adaptor (for 1/2-inch microphones)

DP-0776 DP-0775 DP-0774 DP-0978
DP-0977 Adaptor (for un-flanged surface
microphone)
DP-0978 Adaptor (for Type 4101)
DP-0979 Adaptor (for flush-mounted surface DP-0977 DP-0979

microphone)

Miscellaneous
ZG-0350 LEMO to 7-pin B&K adaptor for con-
necting cables with LEMO 1B male
connector to instruments with B&K
7-pin connectors
UA-1405 CIC Adaptor, LEMO to B&K is an
adaptor similar to ZG-0350 with a
BNC to mini-jack cable of 1.5 m to
inject CIC to the preamplifier
WB-0850 Insert Voltage or CIC Junction Unit
ZG-0328 BNC to B&K 7-pin, provides Delta-

Tron supply from microphone 7-pin
supply* ZG-0350 UA-1405 WB-0850
WB-1421 BNC to LEMO, provides DeltaTron

supply from microphone LEMO
supply*
WB-1452 Microdot to LEMO provides Delta- ZG-0328 WB-1421 WB-1452

Tron supply from microphone LEMO
supply*
WA-0160 General Purpose Transmitter Adaptor

for ½″ microphones
Generates approx. 77 dB SPL in a
1 ccm coupler @ 1 V Generates
approx. –18 dB SPL in the free-field @
1 V and 1 kHz at 1 m distance
WA-0160 UA-0920
Free-field SPL increases +12 dB/oct.
Values for typical 50 mV/Pa cartridge
UA-0920 Transmitter Adaptor for Type 4182
Basically same performance as
WA-0160
* These units require minimum 28 V DC supply from the front-end – cannot be used with PULSE

BF0208-15_Page 42-43_060228.qxp 06-02-2007 10:02 Page 2
MICROPHONE ACCESSORIES CARTRIDGES ADAPTOR
EXT. POLARIZED
4179
UA-0207
1” 4145
4144
UA-0786
UA-0387
EXT. POLARIZED
UA-0237 4190
4191 DB-0375
4192
1/2”
4193
UA-0459
4943
UC-0211
for 4193 only 4955
UA-0386
Can be mounted between cartridge and 1/2”
DZ-9566
for 4176 PREPOLARIZED
preamplifier except EU-4000 which is 1/4”
UA-0196 and 4188 only 4137

4176
4188
UA-1260 1/2” 4189
4942
UC-5265
UA-0122 4947
for 4189 only
4950 UA-0036
UA-0123 PREPOLARIZED
4944 UA-0035
1/4”
4954
EU-4000
WA-0371
WA-1099
EXT. POLARIZED
WQ-1133 4938
UA-0035
1/4” 4939
4941
UA-0385
EXT. POLARIZED WA-0371
1/8” 4138
UA-0355
UA-0160
UA-1667
SURFACE MICROPHONE
UA-1668 4948
4949
UA-1669 ARRAY MICROPHONE

4935
4951
WQ-1133 4957
4958
UA-1640 4944-A
4954-A
WA-1099

BF0208-15_Page 42-43_060228.qxp 06-02-2007 10:02 Page 3
PREAMPLIFIER CABLE
WL-1320 PULSE/NEXUS
2660-W-001
AO-0027 or Classical B & K
CLASSICAL MICROPHONE INPUT

2660 AO-0028 (Double Screened)
Brüel & Kjær
Type 2669
Serial No. 1234567
LEMO 0B AO-0419 LEMO 1B

2673
Brüel & Kjær

Type 2669
Serial No. 1234567
LEMO 0B AO-0428 Classical B & K

2669-B
Brüel & Kjær
Type 2669
Serial No. 1234567

2669-L
Brüel & Kjær
Type 2669 L
No. 212xxxxx

2669-C
4232 only
Brüel & Kjær
Type 2669
Serial No. 1234567
LEMO 0B AO-0419
2669-001
2250/2260
AO-0645 LEMO 10 pin
AO-0414 LEMO 1B (split supply)
Brüel & Kjær

Type 2671
No. 2125206
2671 BNC WB-1421 AO-0414 LEMO 1B
Brüel & Kjær

Type 2671
No. 2125206
2671-001
AO-0087 or BNC
Brüel & Kjær
Type 2671
AO-0426 (Double Screened)

No. 2125206
2699
Brüel & Kjær
Type 2671
No. 2125206
CLASSICAL
2695
DELTATRON INPUT
Brüel & Kjær
Type 2639
LEMO 1B AO-0414
2670 2 m Cable
Max ± 22V supply

Brüel & Kjær
Type 2639
LEMO 1B AO-0414
2670-W-001 0.6 m Cable
UA-0186 AO-0687 JP-0145
UA-0186 AO-0531 BNC
SMB
AO-0587 BNC
060228
AO-0564 BNC
SMB
www.bksv.com Microphones Accessories

43
HYDROPHONES
The Brüel & Kjær range of hydrophones is a range of indi-
vidually calibrated, waterborne-sound transducers that
have a flat frequency response and are omnidirectional
over a wide frequency range. Their construction is such
that they are absolutely waterproof and have good corrosion
resistance. There are four types.
Type 8103 is suitable for laboratory and industrial use and

particularly for the acoustic study of marine animals or for
cavitation measurements.
8105
Type 8104 is ideal for calibration purposes.
8103
Type 8105 is a robust, spherical hydrophone that can be
used at an ocean depth of 1000 m. It has excellent directional 8104
characteristics, being omnidirectional over 270° in the axial
plane and 360° in the radial plane.
8106
Type 8106 has a built-in amplifier that gives a signal suitable
for transmission over long underwater cables. It can be
used down to an ocean depth of 1000 m.
Type Number 8103 8104 8105 8106

Sensitivity* −211dB re 1 V/μPa ±2dB −205 dB re 1 V/μPa ±2 dB −173 dB re 1 V/μPa ±3 dB
Nominal Voltage Sensitivity 29 μV/Pa 56 μV/Pa 2.24 mV/Pa
Nominal Charge Sensitivity* 0.1 pC/Pa 0.44 pC/Pa 0.41 pC/Pa N/A
Capacitance*
3700 pF 7800 pF 7250 pF N/A
(incl. standard cable)
0.1 Hz to 20 kHz 0.1 Hz to 10 kHz 10 Hz to 10 kHz
+1/–1.5 dB ±1.5 dB +0.5/−3.0 dB
0.1 Hz to 100 kHz
+1/−6.5 dB
Frequency Response* (re 250 Hz) +1.5/−6.0 dB ±4.0 dB +0.5/−6.0 dB
0.1 Hz to 160 kHz
+3.5/−10.0 dB
+3.5/−12.5 dB +4/−12.0 dB +6/−10.0 dB
Horizontal Directivity
±2 dB at 100 kHz ±2 dB at 20 kHz
(radial xy plane)
±2 dB
Vertical Directivity
±4 dB at 100 kHz ±2 dB at 50 kHz over 270° at 80 kHz ±3 dB at 20 kHz
(axial xz plane)
±2.5 dB at 100 kHz
Leakage Resistance* (at 20 ×C) >2500 MΩ
Operating Temperature Range:

Short-term −30°C to +120°C
Continuous −30°C to +80°C −10°C to +60°C
Sensitivity Change with Temp.:
Charge 0 to +0.03 dB/°C 0 to +0.03 dB/°C 0 to +0.03 dB/°C –
Voltage 0 to −0.03 dB/°C 0 to −0.04 dB/°C 0 to −0.03 dB/°C 0 to +0.01 dB/°C
Max. Operating Static Pressure 252 dB = 4 ×106 Pa = 40 atm. = 400 m ocean depth 260 dB = 9.8 × 106 Pa = 100 atm. = 1000 m ocean depth
Sensitivity Change with Static 0 to 1 × 10–7 dB/Pa

Pressure 0 to –3 × 10–7 dB/Pa (0 to −0.03 dB/atm.)
0 to 0.01 dB/atm.
Allowable Total Radiation Dose 5 × 107 Rad.

Type Number 8103 8104 8105 8106
Dimensions
Length: 50 mm (1.97″) 120 mm (4.73″) 93 mm (3.66″) 182 mm (7.17″)
Body diameter: 9.5 mm (0.37″) 21 mm (0.83″) 22 mm (0.87″) 32 mm (1.26″)
Weight
170 g (0.37 lb.) 1.6 kg (3.5 lb.) 382 g (0.84 lb.)
(including integral cable)
6 m waterproof low-noise
double-shielded teflon 10 m waterblocked low-noise shielded cable to
Integral Cable
cable with standard minia- MIL–C–915 with BNC plug
ture coaxial plug
* Nominal value, each hydrophone is supplied with its own calibration data
Note: Unless otherwise stated, all values are valid at 23°C (73°F)
Hydrophone Cables and Connectors
Water Air
Hydrophone Connector Cable Connector Cable Connector
8103 or 8103-V - AC-0043 - x
8103 10-32 UNF
8104 or 8104-V - AC-0034 - x

8104 BNC
AO-1431 JP-0108
8104 - W-001* AO-1432
AC-0034
JP-0415 JJ-0415 AC-0034 JP-0415 JJ-0415
8105 or 8105-V - AC-0034 - x
8105 BNC
AO-1431 JP-0108
8105 - W-001* AO-1432
AC-0034
JP-0415 JJ-0415 AC-0034 JP-0415 JJ-0415
AO-1433 AO-0390
8106 B & K 7-pin
AC-0101 AC-0101
JP-0735 JJ-0738 JP-0735 JP-0717
* 10 m 951173/2
www.bksv.com Hydrophones 45
PRESSURE TRANSDUCERS
Pressure transducers produce an electrical output propor- mum line pressure. Maximum reference pressure, and maximum
tional to the pressure applied. The frequency of pressure case pressure are specified on the data sheets.
fluctuation should be lower than the resonant frequency
of the transducer, and the electrical output is essentially The piezoresistive strain-gauge element is a solid-state, silicon
independent of frequency below one-fifth the resonant resistor, which changes electrical resistance in proportion
frequency (flat frequency response). to applied mechanical stress. Since it is a single crystal, it is
not only strong but virtually free of mechanical hysteresis
When pressure is applied, the force on the sensing element with inherently good linearity. The significant characteristic
due to the pressure results in a deformation of the sensing of this element is that its change of resistance is largely
element. This deformation changes the resistance of the relative to its change in length. It has a gauge factor many
element and the electrical output of the transducer. In a times greater than the typical wire strain gauge. Piezoresistive
well-designed transducer, the deformation and electrical element gauge factors range typically from 50 to 200.
output are directly proportional to pressure over a wide
range of frequencies. The diffused piezoresistive transducer uses a silicon element
for the mechanical structure, and the strain gauge is an
The sensing elements and constraining parts in silicon dia- integral part of the silicon element. The gauge is diffused
phragm pressure transducers possess such a small amount into the structure. To accomplish this, IC manufacturing
of damping due to internal friction that it may be disregarded. techniques are employed, and the technique lends itself to
Significant amounts of damping may be introduced by the miniaturisation and volume manufacture.
medium being measured.
ENDEVCO uses a sculptured diaphragm that is considerably
The ENDEVCO pressure transducers listed in this catalogue thicker at the outer edge, and has two islands in the middle
employ a fully active Wheatstone Bridge, consisting of four section. This concentrates the stress to ensure maximum
piezoresistive gauges atomically diffused into a sculptured accuracy.
silicon diaphragm. The silicon integrated chip is itself the
diaphragm. Applied pressure presents a distributed load to The major disadvantages of silicon diaphragms are their
the diaphragm, which in turn provides bending stresses difficulties of providing water and chemical media protection
and resultant strains to which the strain gauges react. This and their tendency to shatter under particle impingement.
stress creates a strain proportional to the applied pressure, Silicon is a brittle material, crystalline in structure, and can
which results in a bridge unbalance. With an applied voltage, crack or shatter on impact. Protective screens are provided
this unbalance produces a millivolt deviation at the bridge or optional on all ENDEVCO models.
output, which is proportional to the net difference in pressure
acting upon the diaphragm. Pressure Transducer Options: See Table “Pressure Transducer
Options (page 49) for options available for common pressure
Pressure transducers are available with three reference transducers.
pressure options: Gauge, psig; Absolute, psia; and Differential,
psid. Piezoelectric microphones are suitable for measurement of
high intensity acoustic noise. Rugged, hermetically sealed
Gauge-PSIG: Pressure is referenced to ambient pressure construction and a temperature range –67°F to +500°F
through an open reference tube. (–55°C to +260°C) make them extremely suitable for a wide
range of environmental conditions. These microphones require
Absolute-PSIA: Pressure is referenced to absolute zero no external power.
pressure by sealing a vacuum within the transducer cavity
(true absolute). Piezoresistive microphones’ are suitable for measurement
of high intensity sound. These microphones employ a four-
Differential-PSID: Pressure is referenced to a second pressure active arm strain gauge bride. Typically these microphones
source through the reference tube. For the reference port require 10 V DC bridge voltage. Temperature range from 0°
source, differential units must use a non-conductive non- to 20°F (–18° to 93°C).
corrosive medium, which will not affect epoxy. Water and
media containing water are not permissible. The reference
port is the low pressure side in all differential measurements.
Differential transducers are designed for specified maxi-

Model/Type Number 8507-C-2 8507-C-5 8507-C-15 8510-B-1 8510-B-2 8510-B-5
Order Number EE-0158 EE-0159 EE-0157 EE-0161 EE-0162 EE-0165
Description Top Connector Top Connector Top Connector Top Connector Top Connector Top Connector
Approximate Positive Sensitivity* mV/psi 150 60 20 200 150 60
Measuring Principle Gauge Gauge Gauge Gauge Gauge Gauge
Full Scale Pressure* psi 2 5 15 1 2 5
Resonant Frequency kHz 70 85 130 55 70 85
Linearity (% Full Scale Output) 1.5 0.75 0.5 1.5 1.5 0.75
°C –54 to +107 –54 to +107 –54 to +107 –54 to +121 –54 to +121 –54 to +121
Operating Temperature Range
°F –65 to +225 –65 to +255 –65 to +225 –65 to +250 –65 to +250 –65 to +250
Burst Pressure Diaphragm/Ref psi psi Min 40/40 100/50 150/50 25/25 40/40 100/100
Weight gram 0.3 0.3 0.3 2.3 2.3 2.3
Connector, Electrical 4 Conductor 4 Conductor 4 Conductor 4 Conductor 4 Conductor 4 Conductor
10–32 UNF 2 A 10–32 UNF 2 A 10 –32 UNF 2 A
Mounting Adhesive Adhesive Adhesive
Thread Thread Thread
Cable and Accessory Types Included 22409** 22409** 22409** 24328** 24328** 24328**
Clip, Stud, Screw Types Included None None None None None None
* 1 psi = 6.895 kPa = 0.069 bar ** Optional
Model/Type Number 8510-B-200 8510-B-500 8510-B-2000 8510-C-15 8510-C-50 8510-C-100

Approximate Positive Sensitivity* mV/psi 1.5 0.6 0.5 15 4.5 2.25
Measuring Principle Gauge Gauge Gauge Gauge Gauge Gauge
Linearity (% Full Scale Output) 0.5 0.5 1 0.5 0.4 0.4
°C –54 to +121 –54 to +121 –54 to +121 –54 to +121 –54 to +121 –54 to +121
°F –65 to +250 –65 to +250 –65 to +250 –65 to +250 –65 to +250 –65 to +250
Burst Pressure Diaphragm/Ref psi psi Min 1000/300 2500/300 10000/300 75/75 250/250 400/300
Weight gram 2.3 2.3 2.3 2.3 2.3 2.3
10 –32 UNF 2 A 10 –32 UNF 2 A 10 –32 UNF 2 A 10 –32 UNF 2 A 10 –32 UNF 2 A 10 –32 UNF 2 A
Mounting
Thread Thread Thread Thread Thread Thread
Cable and Accessory Types Included 24328** 24328** 24328** 24328** 24328** 24328**
www.bksv.com Pressure Transducers 47

Model/Type Number 8511-A-5 K 8511-A-20 K 8515-C–15 8515-C-50 8530-B-200 8530-B-500
Description Top Connector Top Connector Side Connector Side Connector Top Connector Top Connector
Approximate Positive Sensitivity* mV/psi 0.1 0.025 13.3 4 3 0.6
Measuring Principle Gauge Gauge Absolute Absolute Absolute Absolute
Linearity (% Full Scale Output) 1.5 1.5 0.5 0.5 0.5 0.5
°C –54 to +121 –54 to +121 –54 to +121 –54 to +121 –54 to +121 –54 to +121
°F –65 to +250 –65 to +250 –65 to +250 –65 to +250 –65 to +250 –65 to +250
Burst Pressure Diaphragm/Ref psi psi Min 20000 40000 90 250 800 2000
Weight gram 11 11 0.08 0.08 2.3 2.3
3/8 –24 UNF 2 A 3/8 –24 UNF 2 A 10 –32 UNF 2 A 10 –32 UNF 2 A
Mounting Adhesive Adhesive
Thread Thread Thread Thread
Cable and Accessory Types Included 24328** 24328** EW 862** EW 862** 24328** 24328**
Model/Type Number 8530-B-1000 8530-B-2 KM 37 8530-C-5 8530-C-50 8530-C-00 8540-15

Order number EE-0184 EE-0186 EE-0189 EE-0190 EE-0188 EE-0196
Approximate Positive Sensitivity* mV/psi 0.3 0.3 15 4.5 2.25 20
Measuring Principle Absolute Absolute Absolute Absolute Absolute Absolute
Linearity (% Full Scale Output) 0.5 1 0.5 0.4 0.4 0.5
°C –54 to +121 –54 to +121 –54 to +121 –54 to +121 –54 to +121 –54 to +260
°F –65 to +250 –65 to +250 –65 to +250 –65 to +250 –65 to +250 –65 to +500
Burst Pressure Diaphragm/Ref psi psi Min 4000 4000 75 250 400 30
Weight gram 2.3 2.3 2.3 2.3 2.3 8.5
Connector, Electrical 4 Conductor 4-pin 4 Conductor 4 Conductor 4 Conductor 4 Conductor
10 –32 UNF 2 A 10 –32 UNF 2 A 10 –32 UNF 2 A 10 –32 UNF 2 A 10 –32 UNF 2 A 10 –32 UNF 2 A
Mounting
Thread Thread Thread Thread Thread Thread
Cable and Accessory Types Included 24328** 3028–120*** 24328** 24328** 24328** 25045**
* 1 psi = 6.895 kPa = 0.069 bar ** Optional *** Detachable

Model/Type Number 8540–50 8540–200 8540–500
Order Number EE-0198 EE-0197 EE-0199
Description Top Connector Top Connector Top Connector
Approximate Positive Sensitivity* mV/psi 6 0.1 0.6
Measuring Principle Absolute Absolute Absolute
Full Scale Pressure* psi 50 200 500
Resonant Frequency kHz 240 450 900
Linearity (% Full Scale Output) 0.5 0.75 0.75
°C –54 to +260 –54 to +260 –54 to +260
°F –65 to +500 –65 to +500 –65 to +500
Burst Pressure Diaphragm/Ref psi psi Min 100 400 1000
Weight gram 8.5 8.5 8.5
Connector, Electrical 4 Conductor 4 Conductor 4 Conductor
10 –32 UNF 2 A 10 –32 UNF 2 A 10 –32 UNF 2 A
Mounting
Thread Thread Thread
Cable and Accessory Types Included 25045** 25045** 25045**
Clip, Stud, Screw Types Included None None None
Pressure Transducer Options

With 4-pin con-
Type Number Standard nector without Metric Thread
cable
8510-B-1 EE-0161 EE-0161-001
8510-B-2 EE-0162 EE-0162-001
8510-B-5 EE-0165 EE-0165-001 EE-0165-003
8510-B-200 EE-0163 EE-0163-001
8510-B-500 EE-0166 EE-0166-001
8510-B-2000 EE-0164 EE-0164-001
8510-C-15 EE0168 EE0168-001 EE-0168-004
8510-C-50 EE-0169 EE-0169-001
8510-C-100 EE-0167 EE-0167-001
8511-A-5K EE-0172 EE-0172-002
8511-A-20K EE-0171 EE-0171-002
8530-B-200 EE-0185 EE-0185-001
8530-B-500 EE-0187 EE-0187-001
8530-B-1000 EE-0184 EE-0184-001
8530-B-2K M37 EE-0186*
8530-C-15 EE-0189 EE-0189-001 EE-0385
8530-C-50 EE-0190 EE-0190-001
8530-C-100 EE-0188 EE-0188-001
* With cable
www.bksv.com Pressure Transducers 49

SIGNAL CONDITIONING
Signal conditioning improves the performance and reliability filtering, powering of transducers, overload detection, and
of the measurement system. A typical system includes the Transducer Electronic Datasheet (TEDS) support.
signal conditioning hardware, which works as an interface
between the raw signals and transducer outputs to the The main types of conditioning inputs are microphone,
measurement device. The conditioning amplifier will supply DeltaTron® (or IEPE), charge, intensity, bridge and differential.
the system with signal amplification, electrical isolation,
Different Input Types Products Usage
• NEXUS Microphone Conditioning Amplifier

Acoustics
• Microphone Power Supply Type 2829 For microphone preamplifiers with seven pin
Microphone • Dual Microphone Supply Type 5935, with sockets, usually a 7-pin LEMO socket and some-
B&K socket times the B&K 7-pin socket.
• 8-channel Acoustic Front-end Type 5966
• NEXUS DeltaTron Conditioning Amplifiers

• Measuring Amplifier, Type 2525
• 16-channel DetaTron Conditioning Amplifier
Vibration
Type 2694
For piezoelectric accelerometers and preamplifiers
DeltaTron • PE/DeltaTron Signal Conditioner Type
with built-in electronics.
EE-0212 (133)
• Battery Powered DeltaTron Conditioner
Type EE-0247 (4416-B)
• WB-1372 DeltaTron power Supply
Acoustics/Vibration
• NEXUS Charge Conditioning Amplifiers

For piezoelectric transducers such as charge
• Measuring Amplifier Type 2525
Charge accelerometers, force transducers, impact
• PE/DeltaTron Signal Conditioner Type
hammers, or hydrophones.
EE- 0212 (133)
Acoustics
For intensity probes, either via two 7-pin LEMO

Intensity • NEXUS Microphone Conditioning Amplifier
sockets, or two 7-pin B&K sockets.

Different Input Types Products Usage
• 3-channel DC/Bridge Amplifier Type EE-0215 For piezoresistive accelerometers, variable

Bridge
(136) capacitance accelerometers and strain gauges.
Vibration
• Charge Amplifiers Types 2634, 2663, and

For differential/balanced piezoelectric
Differential 2663-B (see Accelerometer & Conditioning
accelerometers.
Catalogue, BF 0212)
www.bksv.com Signal Conditioning 51

NEXUS Conditioning Amplifiers
The most flexible and advanced conditioning amplifier auxiliary filters. It is possible to choose between different
from Brüel & Kjær is NEXUS™. NEXUS is flexible in the way standard conditioning amplifiers such as microphone, Del-
it can be configured. It is advanced as it can have both taTron®, charge, and intensity inputs. NEXUS can be con-
acoustic and vibration inputs in the same mainframe. One figured according to your needs. We have preconfigured
NEXUS mainframe can contain up to four independent the most commonly used NEXUS versions for your use.
channels and different filters such as bandpass filters and
NEXUS Physical Dimensions

Height: 90 mm (3.5″)
Width: 144 mm (5.7″)
Depth: 230 mm (9.1″)
Weight: 3 kg (6.6 lb.), including battery
• Digital Control Interface. Conforms to EIA/TIA-574 (RS–232)

• One mainframe holds up to four input channels
• External DC power input, complies with ISO 7637–1 (12 V) and
7637–2 (24 V)
• Operating temperature: –10 to 55°C
Back panel
Ch: 1 2 3 4
Optional
module
Battery NEXUS Optional
• Holds an internal battery (not included)
Processor • Any combination of the four input channels is possible
and power
• Optional filters such as low-pass filters, 20 Hz high-pass filters, single/double
Motherboa module
rd integration and A-, B-, C-, and D-weighting filters
Display • Additional options are also constant power and upper limiting frequency
Control pa
nel
to 140 kHz
OVL
060221

NEXUS Microphone Conditioning Amplifier
You can have up to 4 microphone channels in a single con-
ditioning amplifier.
Preconfigured NEXUS for Acoustical Measurements

Channels 1 2 4 2 2 4
Type Number 2690-A-0S1 2690-A-0S2 2690-A-0S4 2691-A-0S2 2690-A-0F2 2690-A-0F4
Description 1-channel Micro- 2-channel Micro- 4-channel Micro- 2-channel (single 2-channel Micro- 4-channel Micro-
phone Conditioning phone Conditioning phone Conditioning probe) Intensity Con- phone Conditioning phone Conditioning
Amplifier Amplifier Amplifier ditioning Amplifier Amplifier with A, B, Amplifier with A, B,
C, and D filters C, and D filters
Common Features of all NEXUS with Microphone Input

• Up to 4 microphone channels in one mainframe • Input range10 to 33 V DC
• Microphone connector is 7-pin LEMO • Polarization voltage V is 0 V or 200 V
• AC input • Peak meter
• DC input • LCD display
• AC output • TEDS support, IEEE 1451.4
• Battery/Charge Adaptor • Manual or computer controlled
• Frequency range (–1dB): 0.1 Hz to 100 kHz • Mountable in a 19-inch rack
• Floating input for maximum EMI* protection • –20 to 60 dB amplifier gain (80 dB with reduced
• Supply voltage can be ±14 or ±40 V specifications)
• Maximum input: 31.6 V (peak) • Implemented CIC†
• Input protection: ≤50 V (peak)· • Current overload detection
• Input impedance 1 MΩ || 300 pF (AC coupled) • A-weighting filter type “O” is standard
* EMI – Eletromagnetic Interference † CIC – Charge Injection Calibration
NEXUS DeltaTron Conditioning Amplifiers

Up to four DeltaTron input modules can be fitted for con- based accelerometers, microphone preamplifiers or “direct
ditioning of input signals from Constant Current Line Drive voltage” input.
Preconfigured NEXUS for Vibration Measurements

Channels 1 2 4 1 4 4 4 4
Type Number 2693-A-0S1 2693-A-0S2 2693-A-0S4 2693-A-0I1 2693-A-0I4 2693-A-0M4 2693-A-0P4 2693-A-0F4
Description 1-channel 2-channel 4-channel DeltaTron DeltaTron 2-channel DeltaTron DeltaTron
DeltaTron DeltaTron DeltaTron Conditioning Conditioning Charge and 2- Conditioning Conditioning
Conditioning Conditioning Conditioning Amplifier with Amplifier with channel Delta- with Constant Amplifier with
Amplifier Amplifier Amplifier Integration Filter Single and Tron Condi- Power On A, B, C, and D
Double Inte- tioning Filters
grations Amplifier

Common Features of all NEXUS with DeltaTron Input
• Up to 4 DeltraTron input channels in one mainframe • Tacho probe connection via TNC socket supplied with
• BNT connector, floating or single-ended 8 V DC voltage
• AC input • –20 to 60 dB gain (80 dB with reduced specifications)
• DC input • Peak meter
• AC output • LCD display
• Battery/Charge Adaptor • TEDS support, IEEE 1451.4
• Constant current: 4 to 10 mA with a +28 V voltage • Manual or computer controlled
source • Mountable in a 19-inch rack
• Current overload detection • Input impedance 1 MΩ || 100 pF (AC coupled)
• Frequency range (10%): 0.1 Hz to 100 kHz (gain <60 dB)
NEXUS Charge Conditioning Amplifiers

A conditioning charge amplifier can contain up to 4 separate high- and low-pass filtering facilities. Single and double
charge input channels. Each channel has comprehensive integration modes are available.
Preconfigured NEXUS for Vibration Measurements

Channels 1 2 4 1 2 4 1 4 4
Type Number 2692-A-0S1 2692-A-0S2 2692-A-0S4 2692-A-0I1 2692-A-0I2 2692-A-0I4 2692-A-0P1 2692-C 2692-D
Description 1-channel 2-channel 4-channel 1-channel 2-channel 4-channel 1-channel 4-channel 4-channel
Charge Charge Charge Charge Charge Charge Charge Conditioning Conditioning
Conditioning Conditioning Conditioning Conditioning Conditioning Conditioning Conditioning Amplifier for Amplifier for
Amplifier Amplifier Amplifier Amplifier Amplifier Amplifier with Con- very high lev- very high lev-
with Single with Single with Single stant Power els (100 nC) els (100 nC)
and Double and Double and Double On with Single
Integration Integration Integration and Double
Integration
Filters
Common Features of all NEXUS with Charge Input

• Up to four separate charge input channels
• TNC connector
• TNC to 10–32 UNF adaptor
• Differential charge: 10 nC (peak)
• Differential charge for 2692-C/D: 100 nC (peak)
• AC output
• AC input
• DC input
• Single ended or floating input
• Both manual and computer control
• Mountable in a 19-inch rack
• Peak meter
• LCD display
• TEDS support, IEEE 1451.4
• Battery/Charge Adaptor
• Calibration functions
• MRT‡ facilities
• –20 to 60 dB gain (80 dB with reduced specifications)
‡ MRT – Mounted Resonance Testing

Microphone Power Supply Type 2829
This 4-channel Microphone Power Amplifier has a very robust of loudspeakers and telephones. This unit is especially designed
design. Suitable for production, testing and quality control for acoustical systems.
2829 Physical Dimensions

• Height: 232 mm (9.13″)
• Width: 46 mm (1.81″)
• Depth: 106 mm (4.17″)
• Weight: 430 gram (15.25 oz.)
Channels Input: 4 LEMO 1B female, Output: 4 BNC
Type Number 2829
Description 4-channel Microphone Power Supply
Features of Type 2829

• 4-pin inputs, LEMO sockets
• 4 outputs via BNC outlets
• AC output
• DC input power, 12 V
• Stackable units
• Operating temperature is –10 to +55ºC (14 to 131ºF)
• Implemented CIC**
• CIC, maximum input 10 V RMS
• CIC input impedance is 100 kΩ
• Polarization Voltage, 0 V or 200 V
• Provides ± 50 V DC for preamplifiers
• Mountable in a 19-inch rack
• Battery/Charge Adaptor
** CIC – Charge InjectionCalibration

Dual Microphone Supply Type 5935/5935-L
These two dual microphone suppliers work as power supplies plifiers or accelerometers. They are specially designed for
and conditioning for microphone preamplifiers and Delta- work in-the-field due to their portability. Both types
Tron conditioning. They are mainly used as microphone can also be rack-mounted which makes them perfect for
preamplifier power supplies with the feature that they laboratory installations.
also make it possible to amplify the output of the pream-

• Height: 132.6 mm (5.2″)
• Width: 69.5 mm (2.6″)
• Depth: 200 mm (7.9″)
• Weight: 1.1 kg (2 lb. 7 oz)
5935 5935-L
Input: 2 channels, 7-pin B&K sockets Input: 2 channels, 7-pin LEMO sockets
Channels
Output: 2 BNC sockets Output: 2 BNC sockets
Type Number 5935 5935-L
Dual-channel Microphone Power Supply, B&K Dual-channel Microphone Power Supply, LEMO
Description
sockets sockets
Use with DeltaTron accelerometers and Micro- Use with Falcon Range microphone preamplifiers
Application
phone Preamplifier Type 2671 (Type 5935-L)
Supplies heater current for dehumidification in

Special Features Implemented CIC
cases where an external power source is used
Common Features of Types 5935 and 5935-L

• Input impedance: 200 kΩ||500 pF
• Maximum input level: 5 V RMS
• DC input power
• AC output
• Channel gain range: –5 dB to +55 dB
• Selectable linear or A-weighted frequency response for
each channel
• Amplitude and phase-match channels
• Polarization Voltage, 0 V, 28 V or 200 V
• Internal batteries or external power source
• Rack mounting possibilities
• Low output impedance (15 Ω)
• Operating temperature: –10 to +50ºC (14 to 122ºF)

8-channel Acoustic Front-end Type 5966
Type 5966 front-end is a multichannel microphone preamplifier where many inputs are gathered simultaneously. Suitable
power supply, and a high-quality audio frequency field- for use with a DAT recorder.
measurement instrument. It is suitable for applications

• Height: 70 mm (2.8″)
• Width: 297 mm (11.7″)
• Depth: 220 mm (8.7″)
• Weight (not including battery): 3 kg (6 lb. 10 oz)
Channels 8
Type Number 5966
Description 8-channel microphone preamplifier power supply input for Sony PC 208Ax
Features for Type 5966

• AC input
• DC input
• Input impedance: 200 kΩ
• Maximum input level: 5 V RMS
• Maximum and minimum gain: 40 dB, 0 dB
• AC output
• Output impedance is very low: 30 Ω
• A-weighting and Linear filters
• Input: 7-pin LEMO socket
• Output: BNC
• Polarization Voltage: 0 V, 28 V, or 200 V
• Frequency response: 0.5 kHz to 20 kHz
• Rack-mounting possibility
• External supply:12 V to 20 V DC
• Tacho input: BNT
• Tacho data output: 9-pin D-type socket
• 2-pin external input supply
• Operating Temperature: 0 to 50ºC (32 to 122ºF)
• Channel gain, selectable: 0 dB, 20 dB, or 40 dB

Measuring Amplifier Type 2525
This low-noise amplifier has both Charge and DeltaTron inputs. testing. It includes automatic gain adjustment, level moni-
The product is mainly designed for product and prototype toring with alarm output, and signal overload indication.

• Height: 132.5 mm (5.22″)
• Width: 139.5 mm (5.49″)
• Depth: 320 mm (12.6″)
• Weight: 3.6 kg (5.8 lb.)
Channels 1
Type Number 2525
Description Measuring Amplifier

• Charge Input: TNC Socket on front-end
• Maximum input: 0 to100 kHz: 50 nC peak
• DeltaTron Input: BNC socket on front-end
• AC output
• AC input power
• RMS
• Peak
• Menu based user-interface
• Both manual and remote control option
• Storage of up to 8 amplifier setups
• Gain adjustment ensures rapid and accurate setup and
ease of interpretation
• Conversion of acceleration signals to velocity and
displacement
• Includes a mounted resonance measuring function for
the best mounting of accelerometers
• Built-in filters: high-pass and low-pass
• External filters can be attached via a 15-pin auxiliary
connector
• Operating temperature: 5 to 40ºC (41 to 104ºF)
• Mountable in rack
• LCD display

16-channel DeltaTron Conditioning Amplifier Type 2694
This multichannel conditioning amplifier has an analogue designed for larger multichannel applications such as modal
input for accelerometers, microphone preamplifiers, and analysis or array measurements.
tachometers. The amplifier can be stacked and is specially

• Height: 46.3 mm (1.7″)
• Width: 449 mm (17.7″)
• Depth: 254mm (10″)
• Weight:2.5 kg (5.5 lb.)
Type Number Description
Standard version 16-channel standard DeltaTron Conditioning

2694-A
• No filters Amplifier
Basic version 16-channel standard DeltaTron Conditioning

2694-B
• No optional filters available Amplifier
Customised version
2694-C • Optional filters, A-, B-, C- and D-filters, single and double integration filters in 1 to 16 channels, or
single and double integration filters in all 16 channels
2694-D 16-channel standard DeltaTron Conditioning Amplifier with single and double Integration filters

• DeltaTron input, channel 1 to 15: BNC
• Voltage input connector, channel 16; BNT (CCLD, voltage
or tacho)
• AC output
• AC Input Power
• DC Input Power
• DC supply
• Transducer supply: DeltaTron Current: 6 mA ±15%,
DeltaTron Voltage: 25 V ±10%
• Battery/Charge adaptor
• Controlled by Windows®-based software
• Operating temperature: –10 to 55ºC (14 to 131ºF)
• Optional filters, high-pass, A-, B-, C-, D-filter, low-pass filter
• Stackable and rack mountable
• Serial Interface: RS–232

PE/DeltaTron Signal Conditioner EE-0212
EE-0212 is portable and can be stacked 3 at a time. This
makes the unit suitable for automotive test applications
and other in-the-field measurement setups.
EE-0212 Physical Dimensions

• Height:141 mm (5.57″)
• Width: 64 mm (2.52″)
• Depth: 304.8 mm (12″)
• Weight: 1.81 kg (4 lb.)
Channels 3
Type Number 133
Order Number EE-0212
Description PE/DeltaTron Signal Conditioner
Features of EE-0212
• Charge input (Piezoelectric): BNC
• DeltaTron Input: BNC
• AC output
• AC input power
• DC input power is an option
• Optional battery/charge adaptor
• Maximum charge input: ≤ 30000 pC
• 100 kHz bandwidth
• Rack mountable
• Filter options, high-pass
• LED display
• RMS
• Power option: 12 V DC
• Both manual and computer control options
• Computer control via RSR-232
• High-pass filter

DeltaTron Power Supply Type WB-1372
WB-1372 Physical Dimensions

• Height: 39 mm (1.5″)
• Width: 65 mm (2.5″)
• Depth: 120 mm (4.7″)
• Weight: gram ( oz.)
Channels 1
Type Number WB-1372
Description DeltaTron Power Supply
Features of WB-1372
• Powers one DeltaTron transducer
• Input/output BNC sockets
• Transducer current: 3 mA (±20%)
• Displays bias voltage on the meter
• Dynamic Impedance: >100 kΩ
• Battery powered. 3 pcs. 9V standard batteries for powering
• Battery check
• AC output

Battery-powered DeltaTron Conditioner EE-0247
This unit is very handy and lightweight. It is battery-operated transducer with current and provides it with a selectable
and can be used for transducers with DeltaTron or others gain of 1 or 10.
with IEPE. The unit has been designed to supply the

• Height: 79.4 mm (3.125″)
• Width: 31.8 mm (1.25″)
• Depth: 149.2 mm (5.875″)
• Weight: 0.51 kg (18 oz)
Channels 1
Type Number 4416-B
Description Battery-powered DeltaTron Conditioner
Features of EE-0247
• DeltaTron input: BNC
• AC output
• DC input power
• Input Impedance: >20 kΩ
• External power supply: 12 V DC at 25 mA minimum
• Selectable gain: 1 or 10
• Battery operation time: 8 hours
• LED indicators
• Manual Control
• Battery/charge adaptor
• Operating Temperature: 0 to +50ºC (+32 to +122ºF)

3-channel DC/Bridge Amplifier Type EE-0215
This unit can easily be used within the automotive industry,
for example, for crash testing.

• Height: 141 mm (5.57″)
• Width: 64 mm (2.52″)
• Depth: 304.8 mm (12″)
• Weight: 1.81 kg (4 lb.)
Channels 3
Type Number 136
Description 3-channel DC Bridge Voltage Amplifier
Features of EE-0215
• Bridge input (Piezoresistive)
• AC/DC voltage output
• BNC output connector
• RMS reading
• AC input power
• DC input power is optional
• It is powered with 90 – 264 V AC, 50/60 Hz
• 200 kHz bandwidth
• Optional application software
• 4 different excitation voltage levels
• Gain range is 0 to 1000
• Battery/Charge adaptor is optional
• Rack mountable, three can be stacked and configured
together
• LED display
• Optional filters
• Both manual and computer control
• RS–232 Serial Interface
• 12 V DC power option
• Low-pass filter
Brüel & Kjær offers a 3-channel DC-powered Differential

Voltage Amplifier. This option, EE-0216 (136-1), makes it
possible to transport the amplifier in an easy and comfortable
way.

CALIBRATION
The most important parameter for any measurement device complies with the requirements of national legislation,
is sensitivity. The sensitivity can be defined as the ratio of standard bodies or customers
the output parameter to the input parameter. To determine • To verify the stability of the measurement equipment,
the sensitivity is to calibrate the measurement device. including equipment used to perform calibration
• To account for local measurement conditions, for example,
A calibration is performed: variations in ambient pressure and temperature
• To ensure that your measurements are correct • To ensure product quality
• To prove that measurement methods and the equipment • To build confidence in measurement results
used are accurate, for example, to prove that a measurement
Calibrators
4231 4226 4228 4229
Type Number 4231 4226 4228 4229

Multifunction
Hydrophone
Description Sound Calibrator Acoustic Cali- Pistonphone
Calibrator
brator
EN/IEC 60942 EN/IEC 60942
(2003) Class LS* (2003) Class LS IEC 60942
Standards –
and Class 1 and Class 1 (1998) Class 1
ANSIS1.40–1984 ANSIS1.40–1984
From 151 to
94, 104 and 166 dB re 1μPa,
Calibration Pressure dB SPL 94 and 114 124
114 depending on
hydrophone
31.5 Hz to
16 kHz in
Calibration Frequencies Hz 1000 251.2 251.2
octave steps
plus 12.5 kHz
Calibration Accuracy dB ±0.2 ±0.2 at 94 dB ±0.2 ±0.7
1-inch and 1/2-
Fits Types 8100,
inch 1/2-inch 1-inch, 1/2-
8101, 8103,
Transducer (1/4-inch and and 1/4-inch inch,1/4-inch
8104, 8105 and
1/8-inch with and 1/8-inch
8106
adaptor)
* Type 4231 conforms with Class LS tolerances over the full temperature range from –10 to +50°C

www.bksv.com Calibration 65
BF0208-15_ServiceSpread.qxp 07-02-2007 11:13 Page 38
BRÜEL & KJÆR SERVICE

Maximise the Return on that meet the highest standards the integrity of your measure- you get the full benefit of your
your Investment in quality and performance. In ments through the entire life- investment for many years to
When you buy software, instru- addition, Brüel & Kjær offers a time of the products. A come.
ments or transducers from range of services to help you Brüel & Kjær service agreement
Brüel & Kjær, you buy products maintain your equipment and is the best way to ensure that
I N S TA L L AT I O N
Installation
It is very important to Brüel & Kjær that our customers get up and running success-
fully with their new equipment. To achieve this we supply all products with detailed
product documentation and we strive to make our products easy and intuitive to
use. However, in some cases, especially with our more comprehensive systems, it
may be beneficial to get the assistance of Brüel & Kjær project engineers and appli-
cation specialists. Therefore, we offer on-site installation and site acceptance test if
required.
TION C
LLA
A
ST
IN
Education
E D U C AT I O N
We have made 60 years of knowledge and experience available to our customers
EDUCATION
through our knowledge centre, Brüel & Kjær University, from which we can build
and spread sound and vibration related knowledge worldwide by means of semi-
nars, advanced courses and product training covering a broad range of applica-
tions, theories and products. Through this knowledge-sharing program, we believe
that we can truly help our customers and their employees maximise the benefits
gained from using Brüel & Kjær equipment.
SU
Support
PP
In addition, Brüel & Kjær offers a variety of technical literature ranging from
ORT
SUPPORT
Product Data to reference books that help you to understand the applications, the
products and the theory behind sound and vibration measurements. Most of this lit-
erature is available not only as printed matter but also in electronic form and can
be found on our website www.bksv.com. Customers with a Help Line agreement
also get access to technical support through Brüel & Kjær’s worldwide service net-
work, where a team of technical specialists is ready to answer, by telephone, mail
or fax, any questions that you have about our products.

BF0208-15_ServiceSpread.qxp 07-02-2007 11:13 Page 39
Global Service 21 service centres throughout always at hand in your local

Brüel &Kjær can provide these America, Europe and Asia. language.
services wherever our cus- We’re never further away than
tomers are found. We employ your local sales representative
approximately 100 people in or service centre, so help is
M A I N T E N A N C E C A L I B R AT I O N
Calibration
Measuring with properly calibrated equipment is the only way of knowing that
your readings or results are correct. Regular calibration of your measuring equip-
ment is not just an investment in quality. It can also be a source of real cost savings
by minimising the cost of errors due to faulty or inaccurate measurements.
We offer a comprehensive range of calibration services, and all Brüel & Kjær cali-
brations are documented traceable as well as being performed in accordance with
the relevant national and international standards. Our calibration laboratories are
N CALI accredited in many regions, fulfilling the requirements of ISO and other standards.
BR We are also able to offer primary calibrations for transducers through the Danish
AT Primary Laboratory of Acoustics (DPLA), operated by Brüel & Kjær in association
IO with the Technical University of Denmark.
N
Maintenance
MAI
Reliable measurements can only be made with properly calibrated instruments in

good working order. We know our products better than anyone else, and if an
instrument requires repair or adjustment, our skilled engineers are on hand to do
NTENANCE
the necessary work. By signing an extended warranty agreement, you can eliminate
the risk of unexpected repair costs and extend the factory warranty period up to
five years after purchase.
ADE Upgrade
R As manufacturers of PC-based measurement systems, we know that software is of

UPGRADE
UPG prime importance. As a result, we are continuously improving our software with
new features, enhancements and updates and including these improvements in
new releases. Subscribing to a Software Maintenance and Upgrade Agreement
gives you access to the latest news and software releases from the Brüel & Kjær fam-
ily of software applications, with new features, improved functionality, bug fixes
and error corrections. This will help you keep your equipment at the highest level
of performance for many years to come.
www.bksv.com Service
67
GLOSSARY OF ACOUSTICAL TERMS
Absorption Damping (1)
The conversion of sound energy into another form of energy, The action of frictional or dissipative forces on a dynamic
usually heat when passing through an acoustical medium. system causing the system to lose energy and reduce the
amplitude of movement.
Absorption coefficient
Ratio of sound absorbing effectiveness at a specific frequency, Damping (2)
of a unit area of acoustical absorbent to a unit area of perfectly Removal of echoes and reverberation by the use of sound
absorptive material. absorbing materials. Also: Sound proofing
Decibel scale
Acoustics A linear numbering scale used to define a logarithmic amplitude
The science of the production, control, transmission, reception scale, thereby compressing a wide range of amplitude values
and effects of sound and of the phenomenon of hearing. to a small set of numbers.
Active sound field Diffraction

A sound field in which the particle velocity is in phase with The scattering of radiation at an object smaller than one
the sound pressure. All acoustic energy is transmitted, wavelength and the subsequent interference of the scat-
none is stored. A plane wave propagating in a free field is tered wavefronts.
an example of a purely active sound field and constitutes
the real part of complex sound field. Diffuse field
A sound field in which the sound pressure level is the same
Ambient noise everywhere and the flow of energy is equally probable in
All-pervasive noise associated with a given environment. all directions.
Diffuse sound
Amplitude distribution
Sound that is completely random in phase; sound which
A method of representing time-varying noise by indicating
appears to have no single source.
the percentage of time that the noise level is present in a
series of amplitude intervals.
Directivity factor
The ration of the mean-square pressure (or intensity) on
Anechoic room the axis of a transducer at a certain distance to the mean-
A room whose boundaries effectively absorb all incident square pressure (or intensity) which a spherical source radiating
sound over the frequency range of interest, thereby creating the same power would produce at that point.
essentially free field conditions.
Dynamic capability
Audibility threshold The dynamic capability of an intensity measurement system
The sound pressure level, for a specified frequency at is determined by adding normally 5 dB (for a measuring
which persons with normal hearing begin to respond. error less than 2 dB) to the Residual Intensity Index.
Background noise Far field

The ambient noise level above which signals must be presented Distribution of acoustic energy at a very much greater distance
or noise sources measured. from a source than the linear dimensions of the source
itself; the region of acoustic radiation used to the source
and in which the sound waves can be considered planar.
Complex intensity
Complex intensity is the combined intensity and imaginary Free field
intensity. An environment in which there are no reflective surfaces
within the frequency region of interest.
Cumulative distribution
A method of representing time-varying noise by indicating Hearing loss
the percentage of time that the noise level is present An increase in the threshold of audibility due to disease,
above (or below) a series of amplitude levels. injury, age or exposure to intense noise.

Hertz Noy
The unit of frequency measurement, representing cycles A linear unit of noisiness or annoyance.
per second.
Particle velocity
Imaginary intensity The velocity of air molecules about their rest position due
Imaginary intensity is the non-propagating part of the to a sound wave.
sound field (sometimes called the reactive part).
Pascal, Pa
Impedance, specific acoustic A unit of pressure corresponding to a force of 1 newton
The complex ration of dynamic pressure to particle velocity acting uniformly upon an area of 1 square metre. Hence
at a point in an acoustic medium, measured in rayls (1 rayl 1 Pa = 1 N/m².
= 1 N ⋅ s/m³).
Phase mismatch
Infrasound The relative phase mismatch between the two channels in
Sound at frequencies below the audible range, that is, below an Intensity Measuring System.
about 16 Hz.
Phon
Intensity The loudness level of a sound. It is numerically equal to
Intensity is the real part of the complex intensity and is the the sound pressure level of a 1 kHz free progressive wave,
propagating part of the sound field (sometimes called the which is judged by reliable listeners to be as loud as the
active part). unknown sound.
Isolation Pink noise

Resistance to the transmission of sound by materials and Broadband noise whose energy content is inversely propor-
structures. tional to frequency (–3 dB per octave or –10 dB per decade).
Loudness Power spectrum level

Subjective impression of the intensity of a sound. The level of the power is a band one hertz wide referred
to a given reference power.
Masking
The process by which threshold of audibility of one sound Pressure Residual Intensity Index, LK,0
is raised by the presence of another (masking) sound. The pressure residual intensity index for a given measurement
system is defined as the difference between the measured
Near field pressure level and the indicated sound intensity level when
That part of a sound field, usually within about two wave- exactly the same signal is fed into the two channels of an
lengths from a noise source, where there is no simple rela- intensity analysing system.
tionship between sound level and distance.
Random noise
Newton Noise, whose instantaneous amplitude is not specified at
The force required to accelerate a kg mass at 1 m/s². Ap- any instant of time. Instantaneous amplitude can only be
proximately equal to the gravitational force on a 100 g defined statistically by an amplitude distribution function.
mass.
Residual Intensity Index
Noise emission level Residual Intensity Index in a given direction at a point is
The dB(A) level measured at a specified distance and direction defined as the difference between the sound level and the
from a noise source, in an open environment, above a sound pressure level measured in the given direction at
specified type of surface. Generally follows the recommendation that point. In practice LK is normally negative.
of a national or industry standard.
Residual Intensity, LI,R
Noise reduction coefficient, NRC The sound intensity level measured when the same signal
The arithmetic average of the sound absorption coefficients is fed to both channels of a sound intensity measuring system,
of a material at 250, 500, 1000 and 2000 Hz. or it is exposed to a pure reactive field.
www.bksv.com Glossary of Acoustical Terms 69

Reverberation Sound pressure
The persistance of sound in an enclosure after a sound A dynamic variation in atmospheric pressure. The pressure
source has been stopped. Reverberation time is the time, at a point in space minus the static pressure at that point.
in seconds required for sound pressure at a specific frequency
to decay 60 dB after a sound source is stopped.
Sound pressure level
Root mean square (RMS) The fundamental measure of sound pressure. Defined as:
The square root of the arithmetic average of a set of
squared instantaneous values. p
L p = 20 log ------ dB
p0
Sabin
A measure of sound absorption of a surface. One metric Where p is the RMS value (unless otherwise stated) of
sabine is equivalent to 1 square metre of perfectly absorptive sound pressure in pascals, and p0 is 20 μPa for measurements
surface. in air.
Semianechoic field
Sound transmission class, STC
A free field above a reflective plane.
A single-number rating for describing sound transmission
loss of a wall or partition.
Sone
A linear unit of loudness. The ration of loudness of a
sound to that of a 1 kHz tone 40 dB above the threshold of Sound transmission loss
hearing. Ratio of the sound energy emitted by an acoustical meaterial
or structure to the energy incident upon the opposite side.
Sound
Energy that is transmitted by pressure waves in air or other
materials and is the objective cause of the sensation of Standing wave
hearing. Commonly called noise if it is unwanted. A periodic wave having a fixed distribution in space which
is the result of interference of progressive waves of the
Sound intensity same frequency and kind. Characterised by the existence
The rate of sound energy transmission per unit area in a of maxima and minima amplitudes that are fixed in space.
specified direction.
Sound level Ultrasound

The level of sound measured with a sound level meter and Sound at frequencies above the audible range, that is,
one of its weighting networks. When A-weighting is used, above about 20 kHz.
the sound level is given in dB(A).
Wavelength
Sound level meter The distance measured perpendicular to the wavefront in
An electronic instrument for measuring the RMS level of
the direction of propagation between two successive
sound in accordance with an accepted national or international
standard. points in the wave, which are separated by one period.
Equals the ratio of the speed of sound in the medium to
Sound power the fundamental frequency.
The total sound energy radiated by a source per unit time.
Weighting network
Sound power level An electronic filter in a sound level meter which approximates
The fundamental measure of sound power. Defined as: under defined conditions the frequency response of the
P human ear. The A-weighting network is most commonly used.
L W = 10 log ------ dB
P0
Where P is the RMS value of sound power in watts, and P0 White noise
is 1 pW. Broadband noise having constant energy per unit of frequency.

SALES AND SERVICE WORLDWIDE
ALGERIA CANADA ECUADOR HUNGARY JAPAN
Bio Science Tech Sarl Brüel & Kjaer – Pointe-Claire GRUBEL Comercio y Spectris Components Kft. Brüel & Kjær Japan
11 Clos des Vergers 6600 Trans-Canada Hwy, Representaciones Brüel & Kjaer Division 6F, Davinchi shinagawa 2,
Kouba Suite 620 Calle Bosmediano 1218 y Telepy Utca 2/F 1-8-11 Kita-Shinagawa
Alger Pointe Claire Av. 6 de Diciembre 1096 Budapest Shinagawa-ku
Tel: +213 21281935 Quebec H9R 4S2 Quito Tel: +36 1 215 8305 Tokyo 141-0001
Fax: +213 21281935 Tel: +1 514 695 8225 Tel: +593 2 2247 239 Fax: +36 1 215 8202 Tel: +81 3 5715 1612
E-mail: [email protected] Fax: +1 514 695 4808 Fax: +593 2 2255 242 E-mail: [email protected] Fax: +81 3 5715 1613
E-mail: [email protected] 255 243 E-mail: [email protected]
ARGENTINA E-mail: [email protected] ICELAND
Coasin S.A. CHILE STG International ehf JORDAN
Virrey del Pino 4071 TECSIS Ltda. EGYPT Spöngin 39 International Maintenance
1430 Buenos Aires Avda. Kennedy 5454, piso 5, Delta Company for Electronics IS-112 Reykjavik Technologies (IMT)
Tel: +54 11 45523185 Vitacura 31 El Shahed Abdel Moneim Tel: +354 587 2731 Medina Monowarah Street
Fax: +54 11 45553321/3340 Santiago Hafez St. Fax: +354 587 1825 P.O. Box 2522
E-mail: [email protected] Tel: +56 2 410 8520 Almaza – Heliopolis, Cairo E-mail: [email protected] 11821 Amman
Fax: +56 2 410 8541 Tel: +20 2 418 96 05 Tel: +962 6 5536771
AUSTRALIA Fax: +20 2 418 09 64 INDIA Fax: +962 6 5562672
Brüel & Kjaer Australia CHINA, P.R. E-mail: [email protected] Jost’s Engineering Co. Ltd. E-mail: [email protected]
Suite 2, 6–10 Talavera Road Spectris China Limited Plot No. 3, Survey No. 126
PO Box 349 RM.1701Everbright Building ESTONIA Paud Road REPUBLIC OF KASAKHSTAN
North Ryde NSW 2113 No. 6 Fu Xing Men Wai Scanditron A/S Pune 411 038 NDT LLP
Tel: +61 02 9889 8888 Street. Narva mnt. 13A Tel: +91 20 2543 4350/90 Ul. Torekulova 71/76
Fax: +61 02 9889 8866 Beijing 100045 EE-10151 Tallinn Fax: +91 20 2543 4393 Almaty 480 004
E-mail: [email protected] Tel: +86 10 6856 0808 Tel: +372 6 143030 E-mail: [email protected] Tel: +7 3272 573891/96
Fax: +86 10 6802 9962 Fax: +372 6 143031 Fax: +7 3272 573894
AUSTRIA E-mail: E-mail: INDONESIA E-mail: [email protected]
Brüel & Kjaer, GmbH [email protected] [email protected] PT Tamara Overseas Corp.
Zweigniederlassung JL. Pinangsia Timur No. 49 KOREA
Österreich COSTA RICA FINLAND Jakarta 11110 Bruel & Kjaer Korea Ltd.
Lemböckgasse 49 Capris S.A. Kauko-Telko Oy Tel: +6221 625 2760 18th floor, Kangnam Building,
Haus 2/Stg. E/6 Apartado 7–2400 Kutojantie 4 Fax: +6221 625 1689 1321–1 Seocho-dong, Seocho-gu
A-1230 Wien Carretera La Uruca 02630 Espoo E-mail: [email protected] Seoul 137-070
Tel: +43 1 865 7400 San José Tel: +358 9 5211 Tel: +82 2 3473 0605
Fax: +43 1 865 7403 Tel: +506 2329111 Fax: +358 9 755 3110 IRELAND Fax: +82 2 3474 0605
E-mail: [email protected] Fax: +506 2329353 E-mail: teollisuuselektron- Enfonic Ltd. E-mail: [email protected]
[email protected] P.O. Box 9029 (68 South Bank)
BELARUS CROATIA 17 Swords Co. Dublin LITHUANIA
Master Com Systems Mr. Stanko Peric FRANCE Tel: +353 1 807 4083 JSC Lokmis
-BeSmart- Zeljeznicka 84 Brüel & Kjaer France Fax: +353 1 807 4083 Naugarduko 68B
Masherova avenue 25, Sesvetski Kraljevec 46, Rue du Champoreux, Email:[email protected] 03203 Vilnius
office 624 HR-10361 Zagreb B.P. 33, F-91541 Mennecy Cedex Tel: +370 5 2151895
220 002 Minsk Tel. +385 1 20 46 766 Tel: +33 1 69 90 71 00 IRAN Fax: +370 5 2151746
Tel: +375 17 2345204 Fax: +385 1 20 46 766 Fax: +33 1 69 90 02 55 Perse-Sanco Ltd. E-mail: [email protected]
Fax: +375 17 2340161 E-mail: E-mail: [email protected] No. 9 Maryam Alley
E-mail: [email protected] [email protected] South Shams Tabrizi St. MALAYSIA
GERMANY Mirdamad Avenue S&V Teknik Sdn. Bhd.
CYPRUS Brüel & Kjaer GmbH P.O. Box 15815–1844 No. 27, Jalan Nilam 1/2
BELGIUM Hellenic Technical Universitätsallee 11–13 Tehran Subang Hitech Industrial Park
ENMO Belgium Enterprises Ltd. D-28359 Bremen Tel: +98 21 2222 2575 Batu 3, 40400 Shah Alam
Antwerpsesteenweg 49 Larnaca Industrial Estate Tel: +49 421 17 87 0 Fax: +98 21 2222 9588 Tel: +60 3 563 729 79
2350 Turnhout 7100 Larnaca Fax: +49 421 17 87 100 E-mail: [email protected] Fax: +60 3 563 289 31
Tel: +32 14 60 09 00 Tel: +3572 4 533300 E-mail: [email protected] E-mail: [email protected]
Fax: +32 14 60 09 11 +3572 4 813300 ISRAEL
E-mail: [email protected] Fax: +3572 4 530932 GREECE Agentek 1987 Ltd. MALTA
E-mail: [email protected] American Technical Enterprises Atidim Scientific Park, Tektraco Ltd.
BRAZIL Agio Konstantinou 39, Building No. 5 121, B’Kara Road
HBM do Brasil Ltda. CZECH REPUBLIC 1st Floor Athens 14037 P.O.B. 58008 SGN 08 San Gwann
Rua José de Carvalho No. 55 Spectris Praha spol. s.r.o. (P.O. Box 3156 Tel Aviv 61580 Tel: +356 21 378088
Chácara Santo Antonio Pocernieká 96 Athens 10210) Tel: +972 3 6493111 Fax: +356 21 376667
CEP 04714-020 São Paulo-SP 108 00 Praha 10 Tel: +30 210 52 40 740 Fax: +972 3 6481257 E-mail: [email protected]
Tel: +55 11 5188 8166 Tel: +420 2 6702 1100 Fax: +30 210 52 49 995 E-mail: [email protected]
Fax: +55 11 5181 8928 Fax: +420 2 6702 1120 E-mail: [email protected] MAURITIUS
E-mail: [email protected] E-mail: s&[email protected] ITALY M. Muthen
HONG KONG Bruel & Kjaer Italia S.r.l. P.O. Box Reduit
BULGARIA DENMARK Spectris China Ltd. Via Trebbia 1 Tel: +230 4331763
Spectri Co. – Bulgaria Brüel & Kjær Unit 706, 7/F 20090 Opera MI Fax: +230 4334553
P.O.B. 39 Sound & Vibration Miramar Tower 132 Tel: +39 02 5768061
30, St.Teodosij Turnovski Measurement A/S Nathan Road Fax: +39 02 57604524
Str., fl. 1, app. 3 Skodsborgvej 307 Tsim Sha Tsui, Kowloon E-mail: [email protected]
BG-1421 Sofia 2850 Nærum Tel: +852 2548 7486
Tel: +359 2 963 0464 Tel: +45 4580 0500 Fax: +852 2858 1168
+359 2 963 2638 Fax: +45 4580 1405 E-mail: [email protected]
Fax: +359 2 963 1074 E-mail: [email protected]
E-mail: [email protected]
www.bksv.com Sales and Service Worldwide 71

NEGARA BRUNEI DARUSSALAM PHILIPPINES RUSSIA SOUTH AFRICA TURKEY
Kosi Brunei Sdn. Bhd. Philippine Electronic Scan ltd. A&V Technologies cc PRO-PLAN Proje Müh. San.
No. 4 2nd Floor Bangunan Industries Inc. ul. Druzhby 10/32B 419 Vine Avenue Tic. Ltd. Sti.
Dewi Jaya Tito Jovy Building No. 2 117 330 Moscow Ferndale 2194 Krizantem Sk. No. 78
Jalan Gadung Spg. 80 Buencamino St, Alabang Tel: +7 495 796 9125 Tel: +27 11 8868005 34330 Levent
Bandar Seri Muntinlupa Metro Fax: +7 495 938 2247 Fax: +27 11 8868040 Istanbul
Bandar 3180 Manila E-mail: [email protected] E-mail: [email protected] Tel: +90 212 2682574
Tel: +673 2 451820 Tel: +632 842 0716 2799522
Fax: +673 2 451623 Fax: +632 850 8801 RUSSIA SPAIN Fax: +90 212 2646507
E-mail: [email protected] XENA Brüel & Kjaer Ibérica S.A E-mail: [email protected]
NETHERLANDS Sovetskaya ul.68 C/ Teide, 5
Bruel & Kjaer Nederland B.V. POLAND Perm 614000 28703 San Sebastian UK
Plesmanstraat 62, Postbus 412 Brüel & Kjaer Polska Sp. z.o.o. Tel: +7 3422 182195/6/7 de los Reyes, Madrid Bruel & Kjaer UK Ltd.
NL-3900 AK Veenendaal ul. Goraszewska 12 Fax: +7 3422 182195/6/7 Tel: +34 91 659 08 20 Bedford House
Tel: +31 318 559290 PL-02-910 Warszawa E-mail: [email protected] Fax: +34 91 659 08 24 Rutherford Close, Stevenage
Fax: +31 318 559299 Tel: +48 22 8589392 E-mail: [email protected] Hertfordshire SG1 2ND
E-mail: [email protected] 8167556 SAUDI ARABIA Tel: +44 1438 739 000
Fax: +48 22 8588221 Contracting SRI LANKA Fax: +44 1438 739 099
NEW ZEALAND E-mail: [email protected] Int’l & Marketing Est. Laboratory Equipment E-mail: [email protected]
AVAI Ltd Sitteen Road, Company
34 Omagh Street PORTUGAL Near Prince Abdullah Palace P.O. Box 1014 UKRAINE
PO Box. 76 068 Brüel&Kjær Iberica Sucursal P.O. Box 8552 Third Floor, YMBA Building Tecon Ltd.
Manuku City, Auckland em Portugal Jeddah 21492 Colombo 1 Vul. Sichnevogo
Tel: +64 9 279 8802 Rua Alto do Montijo, Tel: +966 2 667 0644 Tel: +94 11 2320257 Povstannja 14, off 43
Fax: +64 9 279 8883 13-2. floor, Esq Fax: +966 2 665 7716 Fax: +94 11 2343009 01010 Kiev
E-mail: Portela de Carnaxide E-mail: [email protected] E-mail: [email protected] Tel: +380 44 2900180
[email protected] 2790-177 Carnaxide 2542939
Tel: +351 21 4169 040 SAUDI ARABIA SWEDEN Fax: +380 44 2542939
OMARN Fax: +351 21 4169 049 IRIS Maintenance Technology Brüel & Kjaer
Ali Al-Aufy Trading Co. L.L.C E-mail: [email protected] P.O. Box 4719 Sound & Vibration UNITED ARAB EMIRATES
P.O. Box 64 Al-Khobar 31952 Measurement A/S Nahla Medical Supplies
Postal Code 116 QATAR Tel: +966 3 8980993 ext. 201 Göteborgsvägen 99, Hus 5 No. 203, Suhail Al Mazroui Bldg.,
Mina Al-Fahal DPIS - Darwish Petroleum & Fax: +966 3 8960706 S-504 60 Borås Salam Street, P.O. Box 29348
Tel: +968 24504971/2/3/4 Industrial Services W.L.L E-mail: [email protected] Tel: +46 33 22 56 22 Abu Dhabi
Fax: +968 24504975 KDS Building – 2nd Floor Fax: +46 33 12 31 40 Tel: +971 2 676 4975
E-mail:[email protected] Salwa Road, P.O. Box 350 SERBIA E-mail: [email protected] Fax: +971 2 676 2199
Doha RMS d.o.o E-mail:
NORWAY Tel: +974 4366678 Gandijeva 124/29 SWITZERLAND [email protected]
Brüel & Kjaer Fax: +974 4415172 YU-11070 Novi Beograd B&K Messtechnik GmbH
Sound & Vibration E-mail: [email protected] Tel: +381 11 2177582 Glattalstrasse 529 URUGUAY
Measurement NUF Fax: +381 11 2177583 8153 Rümlang-Letten Coasin Instrumentos S.A.
c/o PJA-Service ROMANIA E-mail: [email protected] Tel: +41 44 880 70 35 Obligado 1263
Torvveien 9 Afico S.A. Fax: +41 44 880 70 39 11300 Montevideo
N-1371 Asker 32, Ion Urdareanu Street SINGAPORE E-mail: [email protected] Tel: +598 2 7085266
Tel: +47 66 77 11 55 Sector 5 – Bucharest Brüel & Kjaer Fax: +598 2 7090988
Fax: +47 66 77 11 50 Tel./Fax: +40 21 411 51 28 (South Asia Pacific Pte Ltd) TAIWAN, ROC E-mail:
E-mail: E-mail: [email protected] 460 Alexandra Road Bruel & Kjaer, Taiwan Co., Ltd. m.fernandez@coasin-
[email protected] # 34-04A PSA Building 10F, No.378, instrumentos.com.uy
ROMANIA Singapore 119963 FuShing North Road,
PAKISTAN S.C. Enviro Consult s.r.l Tel: +65 6 3774512 Taipei USA
Mushko Electronics Camera de Comert si Industrie, Fax: +65 6 3774502 Tel: +886 22 502 7255 Bruel & Kjaer
Pvt. Limited Tronson 3, Floor 8, Cam. 19, E-mail: [email protected] Fax: +886 22 502 8177 North America Inc.
Oosman Chambers 2, O. Goga Boulevard E-mail: [email protected] 2815-A Colonnades Court
Abdullah Haroon Road 030982 Bucharest, District 3 SLOVENIA Norcross, Georgia
Karachi 74400 Tel: +40 21 3118080 IMS Industrijski merilni THAILAND 30071-1588
Tel: +92 21 5660770-3 Fax: +40 21 3118080 sistemi d.o.o. Measuretronix Ltd. Tel: +1 770 209 6907
Fax: +92 21 5660801 E-mail: [email protected] C. Ljubljanske brigade 23a 2425/2 Latphrao Road, Fax: +1 770 448 3246
E-mail: [email protected] SI-1000 Ljubljana Wangthonglang E-mail: [email protected]
RUSSIA Tel. +386 1 500 09 30 Bangkok 10310
PARAGUAY ASM Test & Measurement Fax: +386 1 500 09 38 Tel: +662 514 1000 VENEZUELA
Eberhard Lewkowitz S.r.l. Petrovsko-Razumovsky E-mail: [email protected] Fax: +662 514 0001 Coasin C.A.
Paraguarí No. 935 Proezd, 29 E-mail: Calle 9 con Calle 4
Casilla de Correos 523 127287 Moscow SLOVAK REPUBLIC [email protected] Edif. Edinurbi, Piso 3, L. U.
Asunción Tel: +7 495 7481645 B&K s.r.o. Apartado de Correos 70.136
Tel: +595 21 444400 Fax: +7 495 7339048 Palisády 20 TUNISIA Los Ruices, Caracas 1070A
Fax: +595 21 444436/37 E-mail: [email protected] 811 06 Bratislava PROELEC Tel : +58 212 2410309
E-mail: Tel: +421 2 544 307 01 Immeuble Venus 2411845
[email protected] RUSSIA Fax: +421 2 544 306 92 Appt. No. 81A, 8éme ètage, Fax: +58 212 2411939
JSC UniversalPribor Ltd. E-mail: [email protected] Av. Hédi Nouria, 2037 Ennasr 2
PERU 8 Line Str., 59 Building B, Box 2 Tunis VIETNAM, S.R.
Miguel Piaggio Henderson Vasilievsky Island Tel: +216 71 816227 EAC Trading Ltd., A/S
Los Flamencos No. 145, 199004 St. Petersburg Fax: +216 71 816233 27 Ly Thai To Street #002
Oficina 501 Tel: +7 812 3345566 E-mail: [email protected] Hanoi
San Isidro – Lima Fax: +7 812 3299425 Tel: +84 4 8260550
Tel: +51 1 441 1266 E-mail: [email protected] Fax: +84 4 8260266
Fax: +51 1 441 2020
E-mail:
[email protected]

INDEX
A E Masking ................................................. 69
Maximum limits ...................................... 4
Absolute-PSIA ........................................46 Education ............................................... 66
Maximum SPL .......................................... 4
Absorption .............................................68 Electroacoustic standards ....................... 3
Measuring amplifier ............................. 58
Absorption coefficient ..........................68 Electrostatic actuators .......................... 40
Microphone accessories ........................ 36
Acoustics ................................................68 EN/IEC 60942 ......................................... 64
Microphone cartridges ........................... 4
Active sound field .................................68 ENDEVCO pressure transducers ........... 46
Microphone holder for tripod ............. 39
Adaptors .........................................35, 36 Microphone power supply ................... 55
Adaptors for calibration .......................40
Airbag microphone ........................11, 16
F Microphone preamplifiers ..... 21, 22, 46
Far field ................................................. 68 Microphone stand ................................ 39
Ambient noise .......................................68 Free field ............................................... 68 Microphone standards ........................... 3
Amplitude distribution .........................68 Free-field microphones ........................... 5 Microphone verification and
Anechoic room ......................................68 calibration ........................................... 26
ANSI ..........................................................3 Miscellaneous ........................................ 41
Array microphone ..........................10, 18 G Multifunction Acoustic Calibrator ....... 64
Audibility threshold ..............................68 Gauge-PSIG ............................................ 46
Global Service ........................................ 67
Glossary of acoustical terms ................ 68 N
B Near field .............................................. 69
Background noise .................................68 Newton .................................................. 69
Binaural microphone .....................13, 16 H NEXUS .................17, 33, 50, 52, 53, 54
Brüel & Kjær Service ..............................66 Hearing loss ........................................... 68 Noise emission level ............................. 69
Heavy duty tripod ................................. 40 Noise reduction coefficient ................. 69
Hertz ...................................................... 69 Nose cone .............................................. 38
C High sound pressure microphone ....... 11 Noy ......................................................... 69
Cable length ..........................................34 High-intensity testing ........................... 11 NRC ........................................................ 69
Cables .....................................................30 High-static pressure microphone .. 11, 16
Calibration ......................................64, 67 Hydrophone Calibrator ........................ 64
Calibrators ......................................29, 64 Hydrophones .................................. 12, 44 O
Cables and Connectors .................... 44 Outdoor microphone kit ...................... 39
Charge Injection Calibration ................26
Outdoor microphones .......................... 13
CIC ..........................................................26 Outdoor protection .............................. 39
CIC adaptor ............................................41 I
Classical preamplifier ............................21 IEC 61043 ............................................... 27
Complex intensity .................................68 IEC 61094 ................................................. 3 P
Conditioning amplifiers ........................50 IEC 61672 .......................................... 3, 13 Pa ........................................................... 69
Corrector ................................................39 IEEE 1451.4 ............................................ 18 Particle velocity ..................................... 69
Cumulative distribution ........................68 Imaginary intensity ............................... 69 Pascal ..................................................... 69
Customised products .............................15 Impedance ............................................. 69 PE/DeltaTron signal conditioner .......... 60
Impedance Tube Microphone .............. 16 Phase mismatch .................................... 69
Infrasound ............................................. 69 Phon ....................................................... 69
D Infrasound measurement ..................... 14 Piezoelectric microphones ................... 12
Damping ................................................68 Inherent noise ......................................... 4 Piezoresistive gauge ............................. 46
Decibel scale ..........................................68 Installation ............................................. 66 Pink noise .............................................. 69
Dehumidifier .........................................39 Intensity ................................................. 69 Pistonphone .......................................... 64
DeltaTron conditioner ..........................62 Isolation ................................................. 69 Power spectrum level ........................... 69
DeltaTron power supply .......................61 IVC .......................................................... 26 Preamplifier holders ............................. 39
DeltaTron preamplifier .........................21 Preamplifiers .................................. 11, 39
Differential-PSID ....................................46 Pressure residual intensity index ......... 69
Diffraction .............................................68
L Pressure transducers ............................. 46
Laboratory standard microphones ...... 14 Pressure-field microphones .................... 7
Diffuse field ...........................................68
Lightweight tripod ............................... 40 Probe microphone ................................ 16
Diffuse sound ........................................68
Loudness ................................................ 69 PULSE ....................................... 17, 33, 34
Diffuse-field microphones ......................6
Low-frequency microphone ................. 15
Directivity factor ...................................68
Low-noise microphones .......................... 9
Dual microphone supply ......................56 R
Dynamic capability ................................68 Rain cover .............................................. 39
Dynamic range ........................................4 M Random incidence corrector ................ 39
Dyn-X .....................................................34 Maintenance ......................................... 67 Random incidence microphone ............. 6
www.bksv.com Index 73
Sound intensity .............................. 27, 70
Random noise ....................................... 69
Raw cables ............................................ 33 Sound intensity calibrators ...................29
T
TEDS .......................................................17
Residual intensity ................................. 69 Sound intensity microphone pairs .......28 TEDS microphones .........................12, 17
Residual intensity index ....................... 69 Sound intensity probes .........................27 Transducer Electronic Data Sheet ........17
Reverberation ....................................... 70 Sound level ............................................70 Turbulence screen .................................39
RMS ........................................................ 70 Sound level meter ......................... 39, 70
Root mean square ................................ 70 Sound power .........................................70
Rotating boom ..................................... 40 Sound power level ................................70 U
Sound pressure ......................................70 Ultrasound .............................................70
Upgrade .................................................67
S Sound pressure level .............................70
UTID ................................................19, 20
Sabin ...................................................... 70 Sound transmission class ......................70
Semianechoic field ............................... 70 Sound transmission loss ........................70
Service ................................................... 66 Special microphones ...............................7 W
Signal conditioning .............................. 50 Standing wave .......................................70 Wavelength ...........................................70
Sone ....................................................... 70 STC ..........................................................70 Weighting network ..............................70
Sound .................................................... 70 Support ..................................................66 White noise ...........................................70
Sound calibrator ................................... 64 Surface Microphone ...................... 11, 16 Windscreen ............................................37
TYPE NUMBER INDEX

133 .................................................. 50, 60 2692-C ....................................................54 4160 ...................................................2, 14
136 ......................................................... 63 2692-D ....................................................54 4165 ..........................................................4
2231 ....................................................... 39 2693-A-0F4 .............................................53 4166 ..........................................................4
2236 ....................................................... 39 2693-A-0I1 ..............................................53 4176 .....................................................2, 5
2237 ....................................................... 39 2693-A-0I4 ..............................................53 4178 ........................................................28
2238 ....................................................... 39 2693-A-0M4 ...........................................53 4179 .....................................................2, 9
2239 ....................................................... 39 2693-A-0P4 .............................................53 4180 ...................................................2, 14
2260 ................................................ 27, 39 2693-A-0S1 .............................................53 4181 ..........................................................4
2510 ....................................................... 12 2693-A-0S2 .............................................53 4182 ..........................................16, 33, 41
2525 ................................................ 50, 58 2693-A-0S4 .............................................53 4184 ........................................................37
2619 ....................................................... 22 2694 ......................................... 17, 50, 59 4187 ...................................................2, 16
2627 ....................................................... 22 2695 ................................................ 22, 24 4188 .......................................2, 5, 13, 19
2633 ....................................................... 22 2699 ................................................ 22, 24 4189 .......................................2, 5, 13, 19
2639 ....................................................... 22 2829 ................................................ 50, 55 4189-A-022 .............................................19
2645 ....................................................... 22 3451 ........................................................29 4190 .......................................2, 5, 13, 19
2660 .................................................. 9, 25 3595 ........................................................27 4191 ..............................................2, 5, 19
2660-W-001 ............................... 9, 25, 33 3599 ........................................................27 4192 .........................................2, 4, 7, 19
2669 ............................. 5, 19, 22, 23, 39 3923 ........................................................40 4193 .......................................2, 4, 15, 19
2669-001 ................................................ 23 4101 ........................................................16 4196 ..........................................................4
2670 ............................. 5, 11, 15, 22, 23 4130 .................................................. 5, 39 4197 ............................................4, 27, 28
2671 .................................. 22, 24, 39, 56 4133 ..........................................................4 4198 .................................................37, 39
2671-W-001 ........................................... 24 4134 ..........................................................4 4226 ........................................................64
2673 ......................................... 22, 24, 39 4135 ..........................................................4 4228 ........................................................64
2683 ....................................................... 27 4136 ..........................................................4 4229 ........................................................64
2690 ....................................................... 53 4137 .................................................... 2, 5 4231 ........................................................64
2692-A-0I1 ............................................. 54 4138 .................................................... 2, 7 4297 ........................................................29
2692-A-0I2 ............................................. 54 4138-A-015 .............................................20 4416-B .............................................50, 62
2692-A-0I4 ............................................. 54 4138-B/C/L-001 .......................................20 4935 ...................................................4, 18
2692-A-0P1 ............................................ 54 4144 .................................................... 2, 7 4938 .......................... 2, 4, 7, 11, 16, 20
2692-A-0S1 ............................................ 54 4145 .................................................... 2, 5 4938 -WB-1418 ......................................11
2692-A-0S2 ............................................ 54 4147 ..........................................................4 4939 .........................................2, 4, 5, 20
2692-A-0S4 ............................................ 54 4155 ..........................................................4 4941 ............................................2, 11, 20

4942 .....................................................2, 6 AR-0014 ................................................. 33 UA-0237 ................................................. 37
4942-A-021 .............................................19 DB-0264 ................................................. 40 UA-0253 ................................................. 37
4942-A-031 .............................................19 DB-0375 ................................................. 36 UA-0254 ................................................. 37
4942-B/C/L-001 .......................................19 DB-0900 ................................................. 40 UA-0308 ................................................. 39
4943 ................................................2, 4, 6 DB-3611 ................................................. 39 UA-0355 ................................................. 38
4943-B/C/L-001 .......................................19 DP-0774 .................................................. 40 UA-0385 ................................................. 38
4944 ..............................................2, 7, 10 DP-0775 .................................................. 40 UA-0386 ................................................. 38
4944-A ....................................................20 DP-0776 .................................................. 40 UA-0387 ................................................. 38
4947 .....................................................2, 7 DP-0977 .................................................. 40 UA-0393 ................................................. 39
4948 .....................................................2, 8 DP-0978 .................................................. 40 UA-0436 ................................................. 38
4948-B ......................................................8 DP-0979 .................................................. 40 UA-0459 ................................................. 37
4949 ..........................................................2 DS-0394 .................................................. 37 UA-0469 ................................................. 37
4950 .....................................................2, 5 DZ-9566 .................................................. 39 UA-0587 ................................................. 40
4951 ..........................................................4 EE-0157 .................................................. 47 UA-0588 ................................................. 39
4952 .......................................... 13, 37, 40 EE-0158 ........................................... 12, 47 UA-0786 ................................................. 36
4954 ..............................................2, 5, 10 EE-0159 .................................................. 47 UA-0801 ................................................. 40
4954-A ....................................................20 EE-0161 ........................................... 12, 47 UA-0803 ................................................. 40
4955 ..............................................2, 9, 19 EE-0162 ........................................... 12, 47 UA-0920 ................................................. 41
4957 ............................... 2, 4, 10, 18, 20 EE-0163 .................................................. 47 UA-0989 ................................................. 40
4958 ............................... 2, 4, 10, 18, 20 EE-0165 .................................................. 47 UA-1070 ................................................. 37
5935 .................................................50, 56 EE-0166 .................................................. 47 UA-1071 ................................................. 37
5935-L ..............................................33, 56 EE-0167 .................................................. 47 UA-1251 ................................................. 40
5966 .................................................50, 57 EE-0168 .................................................. 47 UA-1260 ................................................. 36
5998 ........................................................14 EE-0169 .................................................. 47 UA-1284 ................................................. 39
8103 ........................................................44 EE-0171 .................................................. 48 UA-1317 ................................................. 39
8104 ........................................................44 EE-0172 .................................................. 48 UA-1404 ................................... 13, 37, 39
8105 ........................................................44 EE-0176 .................................................. 48 UA-1405 ................................................. 41
8106 ........................................................44 EE-0178 .................................................. 48 UA-1577 ................................................. 40
8507 ........................................................47 EE-0184 .................................................. 48 UA-1588 ................................................. 39
8507-C-2 .................................................12 EE-0185 .................................................. 48 UA-1639 ................................................. 40
8510 .................................................12, 47 EE-0186 .................................................. 48 UA-1679 .......................................... 37, 39
8511 ........................................................48 EE-0187 .................................................. 48 UA-1700 ................................................. 37
8515 ........................................................48 EE-0188 .................................................. 48 UA-1701 ................................................. 37
8530 ........................................................48 EE-0189 .................................................. 48 UA-1707 ................................................. 40
8540 ........................................................48 EE-0190 .................................................. 48 UC-0195 ................................................. 28
9699 ........................................................14 EE-0196 .................................................. 48 UC-0196 ................................................. 28
AC-0005 ...........................................32, 33 EE-0197 .................................................. 49 UC-0211 ................................................. 15
AC-0079 ..................................................33 EE-0198 .................................................. 49 UC-5265 ................................................. 15
AC-0208 ...........................................32, 33 EE-0199 .................................................. 49 UC-5269 ................................................. 28
AC-0219 ...........................................30, 33 EE-0205 .................................................. 12 UC-5270 ................................................. 28
AC-0289 ....................................30, 31, 33 EE-0206 .................................................. 12 UC-5349 ................................................. 28
AO-0027 .................................................30 EE-0212 ........................................... 50, 60 UC-5360 ................................................. 39
AO-0028 .................................................31 EE-0215 ........................................... 51, 63 WA-0160 ................................................ 41
AO-0087 .................................................32 EE-0247 ........................................... 50, 62 WA-0371 ................................................ 36
AO-0414 .................................................30 EL-4025 .................................................. 33 WB-0850 ................................................ 41
AO-0419 .................................................30 EU-4000 .................................................. 36 WB-1372 ......................................... 50, 61
AO-0426 .................................................32 JP-0101 ................................................... 35 WB-1421 ................................................ 41
AO-0428 .................................................30 RG-223/U ......................................... 32, 33 WB-1452 ................................................ 41
AO-0463 .................................................32 RG-58/U ............................................32, 33 WL-1287 ................................................. 33
AO-0479 .................................................31 UA-0023 ................................................. 40 WL-1302 ................................................. 33
AO-0488 .................................................31 UA-0033 ................................................. 40 WQ-1099 ................................................ 37
AO-0531 .................................................32 UA-0035 ................................................. 36 WQ-1133 ................................................ 37
AO-0537 .................................................31 UA-0036 ................................................. 36 ZG-0328 ................................................. 41
AO-0563 .................................................32 UA-0122 ................................................. 36 ZG-0350 ................................................. 41
AO-0564 .................................................32 UA-0123 ................................................. 36 ZH-0632 ................................................. 27
AO-0587 .................................................32 UA-0160 ............................................ 7, 36
AO-0645 .................................................31 UA-0196 ................................................. 36
AO-0687 .................................................32 UA-0207 ................................................. 37
www.bksv.com Type Number Index 75

BF0208-15_Welcome.qxp 06-02-2007 08:58 Page 3
LITERATURE OVERVIEW
COMPANY PROFILE AND MARKET SEGMENT BROCHURES
Company Profile – BG 1527
Automotive – BG 1530
Aerospace & Defence – BG 1533
Telecom & Audio – BG 1534
Inspired Partnership – BG 1588
Environmental Noise Management – BG 1616
CD-ROM
Master Catalogue – BJ 0234
Transducers & Conditioning

Selection Guide – BJ 0239
PRODUCT CATALOGUES
Accelerometers & Conditioning – BF 0212
PULSE Analyzers & Solutions – BF 0209
Microphones & Conditioning – BF 0208
Sound Level Meter Solutions – BF 0213
MAGAZINES
Magazines – Twice a Year
SERVICE BROCHURE
Worldwide Reliability – BG 1512
In addition to the above, we have a comprehensive range of high-quality literature including Product Data Sheets, Application Notes, Bulletins etc.
For on-line versions visit www.bksv.com
www.bksv.com
BF0208-15_CoverOnly.qxp 06-02-2007 08:33 Page 1
Microphones & Conditioning
Microphones & Conditioning – Product Catalogue, Version 15

ËBF-0208---~Î
BF 0208 – 15
HEADQUARTERS: DK-2850 Nærum · Denmark · Telephone: +45 4580 0500

Fax: +45 4580 1405 · www.bksv.com · [email protected] Product Catalogue, Version 15
Australia (+61) 2 9889-8888 · Austria (+43) 1 865 74 00 · Brazil (+55) 11 5188-8161
Canada (+1) 514 695-8225 · China (+86) 10 680 29906 · Czech Republic (+420) 2 6702 1100
Finland (+358) 9 521300 · France (+33) 1 69 90 71 00 · Germany (+49) 421 17 87 0
Hong Kong (+852) 2548 7486 · Hungary (+36) 1 215 83 05 · Ireland (+353) 1 807 4083
Italy (+39) 0257 68061 · Japan (+81) 3 5715 1612 · Netherlands (+31) 318 55 9290
Norway (+47) 66 771155 · Poland (+48) 22 816 75 56 · Portugal (+351) 21 4169 040
Republic of Korea (+82) 2 3473 0605 · Singapore (+65) 6377 4512 · Spain (+34) 91 659 0820
Slovak Republic (+421) 25 443 0701 · Sweden (+46) 33 22 56 22 · Switzerland (+41) 44 880 7035
Taiwan (+886) 2 2502 7255 · United Kingdom (+44) 14 38 739 000 · USA (+1) 800 332 2040
Local representatives and service organisations worldwide

BF 0208

Uploaded by

Copyright:

Available Formats

BF 0208

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BF 0208

Uploaded by

Copyright:

Available Formats

BF0208-15_CoverOnly.

qxp 06-02-2007 08:33 Page 1

Microphones & Conditioning

Microphones & Conditioning – Product Catalogue, Version 15

HEADQUARTERS: DK-2850 Nærum · Denmark · Telephone: +45 4580 0500

Local representatives and service organisations worldwide

market leadership in measuring Wealth of Experience

2 Microphones & Conditioning – February 2007 Brüel & Kjær

ii Microphones & Conditioning Brüel & Kjær

1967 Type 4138 World’s first 1/8” measuring microphone.

1994 Type 4189 Falcon series at peak performance.

www.bksv.com A Heritage of Excellence 1

Microphone Type 1/8-inch 1/4-inch 1/2-inch 1-inch Polarization

2 Microphones & Conditioning Brüel & Kjær

E IEC 61094 – 4 WS2P

lected, for example, laboratory reference microphones, G IEC 61094 –1 LS1P

Measurement microphones are specified in the international

These standards use the abbreviation WS for working

The digits following “WS” indicate as follows:

Although the microphone is an important component in

It is also worth considering other parameters such as phase

www.bksv.com Selecting the Right Microphone 3

Maximum SPL: Due to mechanical forces acting on the cartridge Recommended

or mechanical damage can happen. The corresponding 4133 4191

sound pressure level is called the maximum SPL. 4134 4192

Dynamic Range of Microphone/Preamplifier Combinations: 4136 4938

In a practical application, the lower limit of dynamic range 4147 4193

is determined by the combined noise from the cartridge 4155 4189

This is especially important when using DeltaTron (IEPE) 4196/4935 4957

preamplifiers, since here the maximum voltage is limited 4951 4958

by the input stage compliance (open-circuit) voltage. 4181 4197

A compliance voltage of, say, 28 V as used in many front-ends

4 Microphones & Conditioning Brüel & Kjær

Type Number 4939 4954 4137* 4176 4188 4189

* Class 2 microphone for Type 2237 ** 0 V = Prepolarized microphone

Type Number 4190 4191 4950 4145

In many cases the pressure and diffuse field response will

Type Number 4942 4943

6 Microphones & Conditioning Brüel & Kjær

Type Number 4138 4938* 4944 4947 4192 4144

* 4938-W-001 is optimised for high static pressure ** 0 V = Prepolarized microphone

8 Microphones & Conditioning Brüel & Kjær

Standards – – Type 4955 is a ½-inch “all titanium” TEDS microphone with a

* Cartridge alone, must be used with Type 2660 preamplifier

Typical noise spectrum Type 4955

NEW NEW NEW

10 Microphones & Conditioning Brüel & Kjær

For measurements below 110 dB the condenser microphone

Charge types have the benefit of being hermetically sealed

Type Number 2510 2510-M4A 8507-C-2 8510-B-1 8510-B-2

dB SPL Pressure Pascal Pressure PSI

12 Microphones & Conditioning Brüel & Kjær

All Outdoor Microphones are supported by a broad range

14 Microphones & Conditioning Brüel & Kjær

4193 with 4189 with Low-frequency Microphone Type 4193 is

Standards E, K, M E, K, M B, I, L Type 4189 with UC-5265 brings the –3 dB limit

Standards – – Impedance Tube Microphone Type 4187 is a 1/4-inch microphone

16 Microphones & Conditioning Brüel & Kjær

For measuring microphones, Class II is the most commonly