An Enpro Industries Company
An Enpro Industries Company
An Enpro Industries Company
Model F350
The proven performance of the Quincy QR-25 is best examined through decades of delivering compressed air on-demand. There are over two million Quincy QR-25 compressors currently in use, some originally installed over 40 years ago. Decades of reliable operation ensures complete satisfaction and builds confidence day after day, year after year.
your air demand. By design, the Quincy QR-25 runs at slower speeds, resulting in lower operating temperature and maximum compressor efficiency. Simply stated: The Quincy QR-25 produces more air per horsepower. Even at first glance, youll see how the efficiency of the QR-25 saves you money. And over a period of five years, nothing even comes close to matching the value of the Quincy QR-25.
INITIAL COMPRESSOR PRICE VS. COST OF OWNERSHIP EFFICIENCY MEASURED BEYOND POWER CONSUMPTION
When you buy a compressor, you also have to pay for the power it consumes and the general maintenance necessary to keep your compressor running. Add these costs to the initial purchase price and you can see the actual cost of ownership. Power costs add up based on the horsepower needed to produce the air you require. However, the more air you can produce per horsepower the less power needed to meet
Sure power costs are a given with any compressor, but what about the consequence of failure. How do you calculate the cost of downtime? Well, with the Quincy QR-25 you wont have to. The Quincy QR-25 is so reliable that you can virtually eliminate the consequence of failure from your equation. Add Quincys five year warranty and youll see how the reliability and efficiency of the Quincy QR-25 builds bottom-line confidence for the long run.
QuincyCompressor.com | Made in the U.S.A | Performance You Demand. Reliability You Trust.
Intake unloaders allow for loadless starting, system flexibility, energy savings, and less wear on the motor. Individual valve pockets allow easy access for routine maintenance.
Cast-iron valve seats are lapped for a total seal, eliminating the need for a discharge line check valve.
Steel valve discs use a unique low lift design and cast-iron bumpers for increased efficiency and less downtime.
High-pressure pistons are cast-iron for strength and long life. Aluminum connecting rods with oil passage for full flow lubrication to piston pins to extend compressor life.
Intercooler has large circular fins for maximum heat dissipation and longer life.
Hydraulic unloader and Safe-Q-Lube protects compressor if oil pressure drops below normal (when loadless starting or dual control is specified).
Rifle-drilled, counter-weighted, one-piece crankshaft reduces vibration, extends life of bearings and wrist pins.
Pressure lubrication with positive displacement oil pump to assure constant lubrication of all critical wear areas.
Tapered roller bearings are oversized for trouble-free operation. Cast-iron crankcase and flywheel for strength and durability. Spin-on oil filter for convenient changes and clean lubrication.
The Quincy QR-25 produces more air using less horsepower by running at slower speeds. The efficiency of running slower also has another benefit lower operating temperature. Lower temperature means cooler air and less stress on the critical compressor components. In addition, the Quincy QR-25 utilizes a positive displacement rotary oil pump that lubricates every critical area of the compressor, from the bottom end to the wrist pin. This keeps things running smoothly and further reduces the operating temperature as the oil absorbs the heat. To keep the oil clean, a spin-on automotive type oil filter is standard on 2-stage compressors. This is just another built-in maintenance convenience of the Quincy QR-25. Heavy-duty construction, efficient disc valves and an advanced lubrication system ensure durability and consistent delivery of air.
PROTECTIVE DEVICES
Valve unloader Hydraulic unloader Dual oil filtration, pickup tube and final spin-on filter (2 stage) Positive displacement oil pump provides oil pressure and velocity for optimum lubrication and heat dissipation Safe-Q-Lube provides for loadless starting and safety protection when oil pressure is low
Engineered for lasting performance, the Quincy QR-25 has been designed for quick and easy maintenance. For example, valves often require the most maintenance. Not only are Quincys heavy-duty, disc-type valves efficient they are accessible without having to remove the cylinder head, unhooking the discharge lines, unbolting the intercoolers, or any other typical valve maintenance procedures.
OPTIONAL EQUIPMENT
Magnetic starter Reduced voltage solid state starters (consult with factory) Dual control Aircooled aftercoolers Air dryers, filters and condensate drains
QuincyCompressor.com | Made in the U.S.A | Performance You Demand. Reliability You Trust.
Model 240
Model 4125
Model 325
Model 5120
* FAD tested in accordance with ISO 1217, Ed.3, Annex-C. ** High pressure basic required above 250 PSIG
Model F5120
Std. Press. Tank Approx. LxWxH Switch Set Size Shipping (in) (PSIG) (Gallons) Weight (lb) 80-100 80-100 30 60 30 290 480 275 560 600 710 770 975 675 775 1095 1120 1225 1285 1680 2010 2140 2140 42x16x37 53x22x42 27x18x47 53x22x48 31x24x75 53x26x51 68x26x50 73x26x56 36x26x78 36x26x78 68x28x56 73x28x61 73x30x62 73x30x62 73x35x66 77x35x72 73x34x72 77x34x72
Model HT325
LxWxH (in) 41x27x44 41x27x44 49x31x54
Bore Bore Stroke No. RPM CFM *ACFM Pilot Valve Tank Approx. L.P. L.P. (in) Cyl. Piston @ 175 PSI Setting Size Shipping (in) (in) Disp. PSI (Gallons) Weight (lb) 4.50 6.00 2.50 2.50 3.25 3.00 3.00 3.50 2 2 2 900 900 900 24.80 24.80 51.50 18.70 18.70 34.50 165-175 165-175 165-175 30 30 60 695 530 1670
9 Diesel 4.50
QuincyCompressor.com | Made in the U.S.A | Performance You Demand. Reliability You Trust.
Model FF390
Single-stage model * FAD tested in accordance with ISO 1217, Ed.3, Annex-C. ** RPM and ACFM shown at 100 PSI for single-stage models, 175 PSI for two-stage models
Model D5120
Single-stage model * FAD tested in accordance with ISO 1217, Ed.3, Annex-C. ** RPM and ACFM shown at 100 PSI for single-stage models, 175 PSI for two-stage models
All performance data meets CAGI/PNEUROP PN2CPTC2 and PN2CPTC3 acceptance test codes for electrically and I.C. engine-driven packaged displacement air compressors.
* FAD tested in accordance with ISO 1217, Ed.3, Annex-C. QPHR dryers require aftercoolers. QPHT dryers include after filter and aftercooler.
QuincyCompressor.com | Made in the U.S.A | Performance You Demand. Reliability You Trust.
* FAD tested in accordance with ISO 1217, Ed.3, Annex-C. ** Two required QPHR & QPNC dryers require aftercoolers. QPHT dryers include after filter and aftercooler.
For optimum compressed air quality, Quincy air dryers, filters and drains are designed and individually selected to match the high standards and performance of Quincy air compressors. Non-Quincy dryers, filters and drains may not meet Quincy quality and selection criteria, and could result in unsatisfactory compressed air quality.
Quincy Air Treatment products help you meet production demand cleanly and efficiently. Quincy filters remove solid contamination from the airstream, while Quincy dryers remove moisture allowing clean, cool air to flow directly to your production line. The result is an efficient compressed air system that reduces your energy costs and eliminates clogged pipes and valves that can lead to production line equipment failure.
High-temp dryers Cycling & non-cycling designs with 10-year heat exchanger warranty Environmentally friendly refrigerants Two-valve balanced system on all units High performance heat exchangers Easy access, powder-coated cabinets Fully Instrumented
5, 10 and 15 cfm Simple, reliable, noncycling design Environmentally friendly R134a refrigerant Consistent performance Compact footprint Low vibration
10
QuincyCompressor.com | Made in the U.S.A | Performance You Demand. Reliability You Trust.
QUINCY FILTERS
Particulate Coalescers Absorbers Moisture Separators High temperature design available High pressure design available 5 micron to 0.01 micron particulate removed 5 ppm to 0.003 ppm liquid carryover 1/4 to 3 NPT aluminum housings 3 to 12 flanged steel housings Delta P gauge Auto drain Color-coded glass filled nylon end caps Push-to-fit element design Low pressure drop/high efficiency 10-year housing warranty
Replaces the old gravity separators Removes all compressor lubricants, including polyglycol emulsions Lightweight, easy change, disposable filter cartridge Versatile size range allows for single or multiple-unit configurations Clean, carbon-free filter media
11
Quincy Compressor is proud to be the official supplier of compressed air to high performance companies like West Coast Choppers and Dale Earnhardt, Inc. Trust your compressed air needs to the leader in reliability, efficiency and flexibility. Quincy Compressor: Performance You Demand. Reliability You Trust.
2010 Quincy Compressor. All rights reserved. Printed in U.S.A. (QR25-007 04/10)
701 N. Dobson Avenue | Bay Minette, AL 36507 | Phone 217.222.7700 | Fax 217.222.5232 | Email: [email protected]