Redistribute EIGRP, RIPv2, OSPF DAN STATIC

aan septiadi email: [email protected] UNIVERSITAS SRIWIJAYA

Redistribute EIGRP, RIPv2, OSPF DAN STATIC Redistribute EIGRP,RIPv2,OSPF dan STATIC Configurasi R1.EIGRP --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 192.168.0.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 192.168.1.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip dhcp pool lan1 Router(dhcp-config)#network 192.168.0.0 255.255.255.0 Router(dhcp-config)#default-router 192.168.0.1 Router(dhcp-config)#dns-server 192.168.0.2 Router(dhcp-config)#exit Router(config)#router eigrp 1 Router(config-router)#network 192.168.0.0 0.0.0.255 Router(config-router)#network 192.168.1.0 0.0.0.255 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R2.EIGRP --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 192.168.3.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 192.168.2.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip dhcp pool lan2 Router(dhcp-config)#network 192.168.3.0 255.255.255.0 Router(dhcp-config)#default-router 192.168.3.1 Router(dhcp-config)#dns-server 192.168.0.2 Router(dhcp-config)#exit Router(config)#router eigrp 1 Router(config-router)#network 192.168.2.0 Router(config-router)#network 192.168.3.0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R3.EIGRP --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 192.168.1.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 192.168.2.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 1/0 Router(config-if)#ip address 192.168.4.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#router eigrp 1 Router(config-router)#network 192.168.1.0 Router(config-router)#network 192.168.2.0 Router(config-router)#network 192.168.4.0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R1.RIPv2 --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 172.16.3.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 172.16.5.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip dhcp pool lan3 Router(dhcp-config)#network 172.16.5.0 255.255.255.0 Router(dhcp-config)#default-router 172.16.5.1 Router(dhcp-config)#dns-server 192.168.0.2 Router(dhcp-config)#exit Router(config)#router rip Router(config-router)#version 2 Router(config-router)#network 172.16.3.0 Router(config-router)#network 172.16.5.0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R2.RIPv2 --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 172.16.4.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 172.16.6.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip dhcp pool lan4 Router(dhcp-config)#network 172.16.6.0 255.255.255.0 Router(dhcp-config)#default-router 172.16.6.1 Router(dhcp-config)#dns-server 192.168.0.2 Router(dhcp-config)#exit Router(config)#router rip Router(config-router)#version 2 Router(config-router)#network 172.16.4.0 Router(config-router)#network 172.16.6.0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R3.RIPv2 --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 172.16.3.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 172.16.4.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 1/0 Router(config-if)#ip address 172.16.1.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#router rip Router(config-router)#version 2 Router(config-router)#network 172.16.1.0 Router(config-router)#network 172.16.3.0 Router(config-router)#network 172.16.4.0 Router(config-router)#^Z Router#

%SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R4.RIPv2 --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 172.16.7.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 172.16.8.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip dhcp pool lan5 Router(dhcp-config)#network 172.16.8.0 255.255.255.0 Router(dhcp-config)#default-router 172.16.8.1 Router(dhcp-config)#dns-server 192.168.0.2 Router(dhcp-config)#exit Router(config)#router rip Router(config-router)#version 2 Router(config-router)#network 172.16.7.0 Router(config-router)#network 172.16.8.0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R5.RIPv2 --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 172.16.9.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 172.16.10.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip dhcp pool lan6 Router(dhcp-config)#network 172.16.10.0 255.255.255.0 Router(dhcp-config)#default-router 172.16.6.1 Router(dhcp-config)#dns-server 192.168.0.2 Router(dhcp-config)#exit Router(config)#router rip Router(config-router)#version 2 Router(config-router)#network 172.16.9.0 Router(config-router)#network 172.16.10.0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R6.RIPv2 --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 172.16.2.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 172.16.7.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 1/0 Router(config-if)#ip address 172.16.9.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#router rip Router(config-router)#version 2 Router(config-router)#network 172.16.2.0 Router(config-router)#network 172.16.7.0 Router(config-router)#network 172.16.9.0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R7.RIPv2 --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 172.16.0.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 172.16.1.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 1/0 Router(config-if)#ip address 172.16.2.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#router rip Router(config-router)#version 2 Router(config-router)#network 172.16.0.0 Router(config-router)#network 172.16.1.0 Router(config-router)#network 172.16.2.0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R1.OSPF --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 10.0.3.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 10.0.4.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip dhcp pool lan7 Router(dhcp-config)#network 10.0.4.0 255.255.255.0 Router(dhcp-config)#default-router 10.0.4.1 Router(dhcp-config)#dns-server 192.168.0.2 Router(dhcp-config)#exit Router(config)#router ospf 1 Router(config-router)#log-adjacency-changes Router(config-router)#network 10.0.3.0 0.0.0.225 area 0 Router(config-router)#network 10.0.4.0 0.0.0.225 area 0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R2.OSPF --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 10.0.1.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 10.0.2.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip dhcp pool lan8 Router(dhcp-config)#network 10.0.2.0 255.255.255.0 Router(dhcp-config)#default-router 10.0.2.1 Router(dhcp-config)#dns-server 192.168.0.2 Router(dhcp-config)#exit Router(config)#router ospf 1 Router(config-router)#log-adjacency-changes Router(config-router)#network 10.0.1.0 0.0.0.225 area 0 Router(config-router)#network 10.0.2.0 0.0.0.225 area 0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R3.OSPF --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 10.0.0.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 10.0.1.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 1/0 Router(config-if)#ip address 10.0.3.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#router ospf 1 Router(config-router)#log-adjacency-changes Router(config-router)#network 10.0.0.0 0.0.0.225 area 0 Router(config-router)#network 10.0.1.0 0.0.0.225 area 0 Router(config-router)#network 10.0.3.0 0.0.0.225 area 0 Router(config-router)#^Z Router# %SYS-5-CONFIG_I: Configured

from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R1.STATIC --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 192.168.14.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 192.168.15.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip dhcp pool lan9 Router(dhcp-config)#network 172.16.15.0 255.255.255.0 Router(dhcp-config)#default-router 192.16.15.1 Router(dhcp-config)#dns-server 192.168.0.2 Router(dhcp-config)#exit Router(config)#ip route 0.0.0.0 0.0.0.0 172.16.14.1 Router(config)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R2.STATIC --- System Configuration Dialog --Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 192.168.12.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 192.168.13.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip dhcp pool lan10 Router(dhcp-config)#network 172.16.13.0 255.255.255.0 Router(dhcp-config)#default-router 192.16.13.1 Router(dhcp-config)#dns-server 192.168.0.2 Router(dhcp-config)#exit Router(config)#ip route 0.0.0.0 0.0.0.0 172.16.12.1 Router(config)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R3.STATIC --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 192.168.12.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 192.168.14.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 1/0 Router(config-if)#ip address 192.168.11.2 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#ip route 172.16.13.0 255.255.255.0 172.16.12.2 Router(config)#ip route 172.16.15.0 255.255.255.0 172.16.14.2 Router(config)#ip route 0.0.0.0 0.0.0.0 172.16.11.1 Router(config)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router# Configurasi R.REDISTRIBUTE --- System Configuration Dialog --- Continue with configuration dialog? [yes/no]: n Press RETURN to get started! Router>enable Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#interface fastEthernet 0/0 Router(config-if)#ip address 192.168.4.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 0/1 Router(config-if)#ip address 172.16.11.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 1/0 Router(config-if)#ip address 172.16.0.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface fastEthernet 1/1 Router(config-if)#ip address 10.0.0.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#exit Router(config)#router eigrp 1 Router(config-router)#redistribute rip metric 1 0 255 255 1 Router(config-router)#redistribute ospf 1 metric 256 0 255 255 1500 Router(config-router)#redistribute static Router(config-router)#network 192.168.4.0 0.0.0.255 Router(config-router)#exit Router(config)#router ospf 1 Router(config-router)#log-adjacency-canges Router(config-router)#redistribute rip subnets Router(config-router)#redistribute eigrp 1 subnets Router(config-router)#redistribute static subnets Router(config-router)#network 10.0.0.0 0.0.0.255 area 0 Router(config-router)#exit Router(config)#router rip Router(config-router)#version 2 Router(config-router)#redistribute eigrp 1 metric 0 Router(config-router)#redistribute ospf 1 metric 0 Router(config-router)#redistribute static metric 0 Router(config-router)#network 172.16.0.0 Router(config-router)#exit Router(config)#ip route 172.16.12.0 255.255.255.0 172.16.11.2 Router(config)#ip route 172.16.14.0 255.255.255.0 172.16.11.2 Router(config)#ip route 172.16.13.0 255.255.255.0 172.16.12.2 Router(config)#ip route 172.16.15.0 255.255.255.0 172.16.14.2 Router(config)#^Z Router# %SYS-5-CONFIG_I: Configured from console by console copy run start Destination filename [startup-config]? Building configuration... [OK] Router#