Recommended Books Approved by Board of Studies and Academic Council

MM-101 Introduction to Engineering Materials

Flinn, R. A. & Trojan, P.K., Engineering Materials & their Applications, Houghton Mifflin, 1990. Charles, J.A., 'Selection and Use of Engineering Materials, Butterworth- Heinemann, 1995 Johnson, H.V., 'Manufacturing Process, Bennett Publishing Company, 1979. Lewis, G.: Selection of Engineering Materials, Prentice Hall, 1990 Shackelford, J.F, Introduction to Materials Science for Engineers, Maxwell Macmillan Publishing Co. 1992 Smith, W.F., Structure and Properties of Engineering Alloys, McGraw Hill Book Co., 1993 Smith, W.F., Principles of Materials Science and Engineering, McGraw Hill, 1996 Van-Vlack, L.H., Elements of Materials Science and Engineering, Addison- Wasely, 1985 Ashby, M.F. and Jones, D.R.H.,Engineering Materials I & II, Butterworth- Heinemann, Oxford, 1996 Narang, G.B.S, Material Science and Processes, Khanna Publication, New Dehli.

CH-101 Applied Chemistry

P.J.Chenier, Introduction to Industrial Chemistry , VCH, 1992 H.L.White, Survey of Industrial Chemisrty John wiley & Sons, 1996 TL Brown at el Chemistry: the General Science , Printice Hall, 1991 Heaton & Blacly, Introduction to Industrial Chemistry, 1996 An Introduction to Industrial Chemistry, A Heaton, 3rd ed, Blackie Academic and Professional, 1996

PH-101 Applied Physics

Kittel C, Introduction to Solid State Physics , Willey New Yark 1976 Wertc A, & Thomas RM, Physics of Solid , Mecgrahill 1970

MM-102 Mechanics of Materials

Parsad I.B., Applied Mechanics and Strength of Materials, Khanna Puications

MN-103 Mineral Processing

Couradian, Mineral Dressing Mineral Processing Technology, BAWills 6th ed Butterworth Heinemann, 1997

MM-201 Physical Metallurgy

Guy A.G and Hren J.J Elements of Physical Metallurgy 3rd ed.Addison- Wesley, Readding, Mass, 1974

Physical Metallurgy Principles, R.E. Reed Hill and R.Abbaschian,3rd ed, PWS publ.Co 1994 Introduction to Physical Metallurgy, Sydney, H.Avener, McGraw Hill 1985 Applied Metallography, G.F.Eander Voort, Van Nostrand Reinhold, 1986 Cahn, R. W. and Haasen, P. : Physical Metallurgy, North-Holland, 1996. Callister Jr., W.D. Materials Guy A.G and Hren J.J Elements of Physical Metallurgy 3rd ed.Addison-Wesley, Readding, Mass, 1974 Physical Metallurgy Principles, R.E. Reed Hill and R.Abbaschian,3rd ed, PWS publ.Co 1994 Introduction to Physical Metallurgy, Sydney, H.Avener, McGraw Hill 1985 Applied Metallography, G.F.Eander Voort, Van Nostrand Reinhold, 1986 Cahn, R. W. and Haasen, P. : Physical Metallurgy, North-Holland, 1996. Callister Jr., W.D. Materials Science and Engineering, John Wiley & Sons, Inc, 1994 Barrett, C.R., Nix, W.D. and Tetelman, A.S, The Principles of Engineering Materials, Prentice Hall, 1973 Petty, E.R., Physical Metallurgy of Engineering Materials, Pitman Honeycombe and H. Bhaadeshia, Steels Microstructure and Properties Avner H. Sidny, Introduction to Physical Metallurgy, McGraw Hill Science and Engineering, John Wiley & Sons, Inc, 1994 Barrett, C.R., Nix, W.D. and Tetelman, A.S, The Principles of Engineering Materials, Prentice Hall, 1973 Petty, E.R., Physical Metallurgy of Engineering Materials, Pitman Honeycombe and H. Bhaadeshia, Steels Microstructure and Properties Avner H. Sidny, Introduction to Physical Metallurgy, McGraw Hill Porter, D.A and Easterling, K.E,Phase Transformations in Metals and Alloys, Chapman & Hall, 1992 Christian, J. W..: Transformations in Metals and Alloys, Pergamon Press,1975 Smallman R.E Modern Physical Metallurgy, 4th ed. Butterworths, Boston,1985

MM-202 Fuels and Furnaces

J.D. Gilchrist, Fuels, Edward Arnold Publisher, London Dame and King, Fuels Technology Edward Arnold Publisher, London Gupta O.P. Elements of Fuels, Furnaces and Refractories, Khanna Publishers, New Delhi, 1990

MM-203 Materials Thermodynamics and Kinetics

Regone, D. V. Thermodynamics of Materials, Vol. I & II, John Wiley, New York, 1995 Rao, Y.V.C. Theory and Problems of Thermodynamics, Wiley Eastern India, 1994 Gaskell, D. R.: Introduction to Thermodynamics of Materials, Taylor and Francis, Inc., 1995. Kubaschewski, , Alcock, C.B. and Spencer, P.J.: Materials Thermochemistry, Pergamon Press, 1993. Hudson, J. B., Thermodynamics, An Advanced Text for Materials Scientists, Wiley, John & Sons, 1996

MM-204 Foundry Engineering

Principles of Metal Casting Philip C. Rosenthal Metallurgical Principals of Foundry

MM-205 Ferrous Metallurgy

Modern Iron and Steel Making, Tupkary. Principles of Extractive Metallurgy, by T. Rosenqvist, McGraw Hill 1983 Extraction Metallurgy, J.D.Gilchirist, Pergamon Press, 1989

MM-206 Powder Metallurgy

German, R. M., Sintering Theory and Practice, Metal Powder Industries Federation, 1996 Bose, A. : Advances in Particulate Materials, Butterworth-Heinemann, 1995 Yule, A.J., and Dunkley, J. D., 'Atomization of Melts for Powder Production and Spray Deposition Clarendon Press, 1994 German, R. M., 'Powder Metallurgy Science, Metal Powder Industries Federation, 1984 Gessinger, G. H. : Powder Metallurgy of Superalloys, Butterworths, 1984 Srivatsan, T. S. and Sudarshan, T. S. Rapid solidification Technology, Technomic Publishing, 1993. Picatinny, N.Y. and Otooni, M.A. : Elements of Rapid Solidification, Fundamentals and Applications, Springer Verlag, 1997. Powder Metallurgy Science, R.M.German, 2nd ed. 1994 Fontana, M.G., Corrosion Engineering, McGraw Hill, Inc, 1987

MM-207 Non-Ferrous Metallurgy

Polmear, I.J. light Alloys, Edward Arnold, 1989 Pehlke, R.D. Unit Processes of Extractive Metallurgy Elesvier Science Publishing Co. 1973 Lee, E.W.W., Frazier, W.E., Jata, K.V., and N.J. Kim., Light Weight Alloys for Aerospace Polmear, I.J., Light Alloys: Metallurgy of the Light Metals, Edward Arnold, 1989.

MM-208 Ceramics
Richerson, D.W. Modern Ceramic Engineering, Marcel Dekker Inc, 1992 Moulson, A.J. and Herbert, J.M. Electro-ceramics, Chapman and Hall, 1990 Dame and King, Fuels Technology Edward Arnold Publisher, London

MM-301 Polymeric Materials

Billmeyer, Polymeric Materials Tobolsky A.V. Properties and Structure of Polymers, Wiley, New York, 1960 Principles of Polymer Engineering, N.G McCrum, C.P. Buckley and C.B. Bjucknall, Chapman & Hall London 1991 Introduction to Polymers, R.J. Young and P.A.Lovell. Principal of Polymer Chemistry, P.J.Flory, Cornell University Press, New York

Terpstra, R. A., Pex, P. P. A. C. and deVries, A. H. : Ceramic Processing, Chapman & Hall, 1995. Mutsuddy, B. C. and Ford, R. G., Ceramic Injection Molding, Chapman & Hall, 1995. Richerson, D.W. Modern Ceramic Engineering, Marcel Dekker Inc, 1992

MM-303 Inspection & Testing of Materials

Hertzberg, R. W.: Deformation and Fracture Mechanics of Engineering Materials, John Wiley, 1996 Dieter, G. E.: Mechanical Metallurgy, McGraw-Hill, 1988 Collins, J.A., Failure of Materials in Mechanical Design, John-Wiley, 1981 Felbeck, D.K. and Atkins, A.G., Strength and Fracture of Engineering Solids, PrenticeHall, 1884

MM-304 Heat-treatment Processes

Steels Heat treatment & Processing, G.Krauss,ASM1995. Physical Metallurgy principles, by R. Reed Hill & R. Abbaschian, pub PWS-Kent pub Boston 1991 Precipitation Hardening, J.W.Martin, IoM, 1996 Rajan T.V, Sharma C.P. and Sharma A., Heat Treatment Principles and Techniques, Prentice Hall Publications, India Thelning K.E., Heat Treatment of Steel Wilkins D.C.A, Heat Treatment and Quality Control of metals Precipitation Hardening, J.W.Martin, IoM, 1996

MM-305 Welding and Joining Processes

Easterling, K.: Introduction to the Physical Metallurgy of Welding, ButterworthHeinemann, 1992. Linnert, G.E., "Welding Metallurgy", American Welding Society. Hull, J.B. and V.B.John: Non-Destructive Testing, Macmillan Education, Ltd., 1988. Silk, M. G.: Ultrasonic Transducers for Nondestructive Testing, Adam Hilger Ltd., Bristol, 1984. Welders guide James, E. Brumbaugh, Mc Millan Pub. Co. N.Y. Joining Processes-An Introduction, D.G.Brandon and W.D.Laplan, 1999 Ferrous Alloys Weldments, Proc,eds.D.L.Olson and T.H.North, Trans-Tech Publ, 1992

MM-306 Composite Materials

Composite Materials, Engineeering & Sciences, F.L.Matthew and R.D.Rawlings, Chapman Fiber-Reinforced Composites, P.K.Mallick Matthews, F. L. & Rawlings, R. D., Composite Materials: Engineering & Science, Chapman

MM-307 Deformation Behaviour of Materials

Hirth J.P. and Lothe J. Theory of Dislocations, McGraw Hill, New York 1984 Mechanical Metallurgy, Dieter G.E. McGraw Hill 1991 The Plastic Deformation of Matals, 2nd ed.,R.W.K.Honeycombe, 1985 Hull, J.B. and John, V. B.: Non-Destructive Testing, Macmillan Education, Ltd., 1988 Textbook Non-destructive testing, Waren J. Mc Gonnagle, Gordon & Breach Science, Publishers,N.Y. London, Paris

MM-308 Corrosion, Protection & Prevention

Corrosion Engineering, M.G.Fontana, 1997 Corrosion, L.R.Shrier The Fundamentals of Corrosion, J.C.Scully Basic Corrosion and Oxidation, J.M.West Corrosion Engineering, M.G.Fontana Electrodepositing and Corrosion Processes, J.M.West. Fontana, M.G., Corrosion Engineering, McGraw Hill, Inc, 1987

MM-401 Nuclear Materials

Materials Science and Technology, Volume 10, Nuclear Materials, Parts I & II, Vol. Editor: Frost, B. R. T, VCH, 1994. Performance and Evaluation of Light Water Reactor Pressure Vessels, The American Society of Mechanical Engineers, 1987 Roberts, J.T.A.: Structural Materials in Nuclear Power Systems, Plenum Press, New York, 1981 Ursu, I., Physics and Technology of Nuclear Materials, Pergamon Press Ltd., 1985. Ruchle, Urinium Production Technology, Butter Worth Series Publications Cutbirth, Thorium Production Technology, Butter Worth Publication

MM-402 MATERIALS CHARACTERIZATION TECHNIQUES

Barret C.S. and Massalski T.B, Structure of Metals, McGraw Hill, New York, 1980 Characterization of Materials, J.W.Watchman, Butterworth-Heinemann, 1993 Microstructural Characterization of Materials, D.Brandson and W.D.Kalplan, 1999 Wachtman, J.B.: Characterization of Materials, Butterworth-Heinemann, 1993 Subarao, Experiments in Material Science, McGraw Hill

MM-403 MANUFACTURING TECHNOLOGY

Manufacturing Processes of Engineering Materials, Kalpakjian Introduction to Manufacturing Processes, Scey Paul De Garmo, Mlack, Kohsar, Processing Methods in Manufacturing, Prentice Hall, USA

MM-404 PHASE TRANSFORMATIONS

Phase Transformations in Metals and Alloys, D.A.Porter and K.E.Easterling, 1st ed. Van Nostrand Reinhold Co, 1987 Reed-Hill, R. E. and Abbaschian, R.: Physical Metallurgy Principles, PWS Publishing, 1994 Smallman R.E Modern Physical Metallurgy, 4th ed. Butterworths, Boston,1985 Christian, J. W..: Transformations in Metals and Alloys, Pergamon Press, 1975

MM-405 Modern Steels

Honeycombe, R. W. K., Steels, Microstructure & Properties, Edward Arnold, London, 1981. Pickering, F. B., Physical Metallurgy and Design of Steels, Applied Science Publishers, 1978. Marshall, P., Austenitic Stainless Steels, Microstructure and Mechanical Properties, Elsevier Applied Science Publishers, 1984.

MM-406 ADVANCED FOUNDRY ENGINEERING

Campbell, J.: Castings, Butterworth-Heinemann, 1991. Hagel, W. C. Stoloff, N.S. and Chester T.S., Superalloys II, John Wiley & Sons, 1987. Kirkaldy and Ward, Aspect of Medern Ferrous Metallurgy, Tronto University Press

MM-407 Selection & Application of Materials

Selection and Use of Engineering Materials, J.A.Charles, F.A.A.Crane and J.A.G.Furness, 3rd ed. Butterworth-Heinemann, 1997 Thoronton, E. A., Aerospace Thermal Structures and Materials for a New Era, American Institute of Aeronautics & Astronautics, 1995. Picatinny, N.Y. and Otooni, M.A. : Elements of Rapid Solidification, Fundamentals and Applications, Springer Verlag, 1997.

MM-408 Fracture Mechanics

Deformation and Fracture Mechanics, R.W.Hertzberg,3rd ed. John Wiley,1989 Frature Mechanics, H.L.Ewalds and R.J.H.Wanhill,3rd ed. Edward Arnold, 1984

MM-302 Vacuum Metallurgy

Vacume Metallurgy by O,W Inker and R. Bakish Elsevier 1971