DS1104 R&D Controller Board: Space

DS1104 R&D Controller Board
Single-board PCI hardware for use in PCs Set of intelligent I/O on-board
dSPACE
Single-Board Hardware

Cost-effective system for controller development
Key Features
Single-board PCI hardware for use in PCs Set of intelligent I/O on-board
Incremental encoder interface Serial interface (UART)
Description
Application Areas The real-time hardware based on PowerPC technology and its set of I/O interfaces make the controller board an ideal solution for developing controllers in various elds, such as drives, robotics, aerospace and automotives.
Key Benets The DS1104 upgrades your PC to a powerful development system for rapid control prototyping (R&D stands for research & development). Real-Time Interface provides Simulink blocks for graphical conguration of A/D, D/A, digital I/O lines, incremental encoder interface and PWM generation, for example. The board can be installed in virtually any PC with a free 5-V PCI slot.
Real-Time Interface
Using Real-Time Interface With Real-Time Interface (RTI), you can easily run your function models on the DS1104 R&D Controller Board. You can configure all I/O graphically by dragging RTI blocks and reduce the implementation time to a minimum.
2
2008
Technical Details
Parameter Processor Specication
MPC8240 processor with PPC 603e core and on-chip peripherals 64-bit oating-point processor CPU clock: 250 MHz 2 x 16 KB cache, on-chip On-chip PCI bridge (33 MHz)
Memory Timer
Global memory Flash memory 4 general-purpose timers
32 MB SDRAM 8 MB 32-bit down counter Reload by hardware 80-ns resolution
1 sampling rate timer (decrementer) 1 time base counter Interrupt controller
32-bit down counter Reload by software 40-ns resolution 64-bit up counter 40-ns resolution 5 timer interrupts 2 incremental encoder index line interrupts 1 UART interrupt 1 slave DSP interrupt 1 slave DSP PWM interrupt 5 A/D converter (end of conversion) interrupts 1 host interrupt 4 external interrupts (user interrupts)
A/D converter
Channels
4 multiplexed channels equipped with one sample & hold A/D converter (1x16-bit) 4 parallel channels each equipped with one sample & hold A/D converter (4x12-bit) Note: 5 A/D converter channels (1x16-bit and 4x12-bit) can be sampled
simultaneously Resolution Input voltage range Conversion time Offset error Gain error Offset drift Gain drift Signal-to-noise ratio D/A converter Channels Resolution Output range Settling time Offset error Gain error Offset drift Gain drift Signal-to-noise ratio Imax Digital I/O Channels Voltage range Iout, max
1)
Multiplexed channels: 16 bit Parallel channels: 12 bit 10 V Multiplexed channels: 2 s1) Parallel channels: 800 ns1) 5 mV Multiplexed channels: 0.25% Parallel channels: 0.5% 4 ppm/K 25 ppm/K Multiplexed channels: >80 dB Parallel channels: >65 dB 8 channels 16-bit 10 V Max. 10 s (full-scale, accuracy LSB) 1 mV 0.1% 13 ppm/K 25 ppm/K >80 dB 5 mA 20-bit parallel I/O Single bit selectable for input or output TTL input/output levels 5 mA
Speed and timing specications describe the capabilities of the hardware components and circuits of our products. Depending on the software complexity, the attainable overall performance gures can deviate signicantly from the hardware specications.
3
2008
Single-Board Hardware
Parameter Digital incremental encoder interface Channels
Specication
2 independent channels Selectable single-ended (TTL) or differential (RS422) input (software programmable
for each channel) Position counters

24-bit resolution Max. 1.65 MHz input frequency, i.e., fourfold pulse count up to 6.6 MHz Counter reset or reload via software
Sensor supply voltage Serial interface Conguration
5 V/0.5 A Single UART (universal asynchronous receiver and transmitter) with FIFO PLL-driven UART for accurate baud rate selection RS232/RS422/RS485 compatibility
Baud rate Slave DSP Type Clock rate Memory
Up to 115.2 kBd (RS232) Up to 1 MBd (RS422/RS485) Texas Instruments TMS320F240 DSP 16-bit xed-point processor 20 MHz 64Kx16 external code memory 28Kx16 external data memory 4Kx16 dual-port memory for communication 32 KB ash memory
I/O channels
10 PWM outputs 4 capture inputs 1 serial peripheral interface
Input voltage range Output current Host interface Physical characteristics Physical size Ambient temperature Cooling Power consumption Power supply
TTL input/output level A/D converter inputs: 0 5 V Max. 13 mA Requires one 33 MHz / 32-bit 5-V PCI slot 185 x 107 mm (7.28 x 4.2 in) 0 55 C (32 131 F) Active cooling by fan 18.5 W +5 V 5%, 2.5 A +12 V 5%, 0.3 A -12 V 5%, 0.2 A
Order Information
Product DS1104 R&D Controller Board Order Number
DS1104
Relevant Software and Hardware

Software Included
DS1104 Real-Time Library Experiment and Platform Manager for hardware
Order Number
RTI CCPPPC CS_O CS_D MLIB/MTRACE CLIB
management Required Optional

Real-Time Interface Microtec C Compiler ControlDesk Standard Operator Version ControlDesk Standard Developer Version MLIB/MTRACE CLIB
Hardware Optional
Connector Panel Combined Connector/LED Panel
Order Number
CP1104 CLP1104
4
2008
Block Diagram
Induction Motor Control

Drive Control In this use case, an induction motor controller is developed with the DS1104. The slave DSP system was designed for applications in drive control, and the PowerPCs calculation power supports convenient simulation and a smooth development process. In combination with Simulink , the board makes it easy to verify and optimize control algorithms and parameters. Determining Values One of the boards incremental encoder interfaces picks up the encoder signal of the motor, while two A/D converters are required to analyze the motor currents. The controller board calculates the control algorithm on the basis of the measured values and determines the corresponding pulse width modulation (PWM). The three-phase PWM signals are generated on the boards DSP subsystem and determine the converters output voltage and frequency.
Use Case
Encoder Signal 6 PWM Signals Ua Ub Uc ia
AC
Frequency Converter
5
2008
6
2008
7
2008
Headquarters in Germany
dSPACE GmbH Technologiepark 25 33100 Paderborn Tel.: +49 52 51 16 38-0 Fax: +49 52 51 6 65 29 [email protected]
United Kingdom
dSPACE Ltd. Unit B7 . Beech House Melbourn Science Park Melbourn Hertfordshire . SG8 6HB Tel.: +44 1763 269 020 Fax: +44 1763 269 021 [email protected]
France
dSPACE Sarl Parc Burospace Btiment 20 Route de la Plaine de Gisy 91573 Bivres Cedex Tel.: +33 1 6935 5060 Fax: +33 1 6935 5061 [email protected]
Japan
dSPACE Japan K.K. 10F Gotenyama Trust Tower 4-7-35 Kitashinagawa Shinagawa-ku Tokyo 140-0001 Tel: +81 3 5798 5460 Fax: +81 3 5798 5464 [email protected]
USA and Canada

dSPACE Inc. 50131 Pontiac Trail Wixom . MI . USA 48393-2020 Tel.: +1 248 295 4700 Fax: +1 248 295 2950 [email protected]
www.dspace.com
01/2008
dSPACE
Copyright 2008 by dSPACE GmbH. All rights reserved. Written permission is required for reproduction of all or parts of this publication. The source must be stated in any such reproduction. dSPACE is continually improving its products and reserves the right to alter the specications of the products contained within this publication at any time without notice. Brand names or product names are trademarks or registered trademarks of their respective companies or organizations.

DS1104 R&D Controller Board: Space

Uploaded by

Copyright:

Available Formats

DS1104 R&D Controller Board: Space

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DS1104 R&D Controller Board: Space

Uploaded by

Copyright:

Available Formats

DS1104 R&D Controller Board