VA 912B Service Manual

Service Manual
ViewSonic VA912/b-3
Model No. VS10931 19 Color TFT LCD Display
( VA912/b- 3_SM Rev. 1a Oct. 2005)
ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright Copyright 2005 by ViewSonic Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any m eans, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or changes. Trademarks Optiquest is a registered trademark of ViewSonic Corporation. ViewSonic is a registered trademark of ViewSonic Corporation. All other trademarks used within this document are the property of their respective owners.
Revision History
Revision SM Editing Date ECR Number Description of Changes Editor
1a
10/12/05
Initial Release
G. Han
ViewSonic Corporation I
Confidential-Do Not Copy VA912/b-3
1. Precautions and Safety Notices 2. Specification 3. Front Panel Function Control Description 4. Circuit Description 5. Adjustment Procedure 6. Troubleshooting Flow Chart 7. Recommended Spare Parts List 8. Exploded Diagram and Exploded Parts List 9. Block Diagram 10. Schematic Diagrams 11. PCB Layout Diagrams
1 5 10 16 18 42 48 53 55 56 69
ViewSonic Corporation
Confidential-Do Not Copy VA912/b-3
II
1. Precautions and Safety Notices

1. Appropriate Operation (1) Turn off the product before cleaning. (2) Use only a dry soft cloth when cleaning the LCD panel surface. (3) Use a soft cloth soaked with mild detergent to clean the display housing. (4) Use only a high quality, safety approved AC/DC power cord. (5) Disconnect the power plug from the AC outlet if the product will not be used for a long period of time. (6) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off. (7) Do not touch the LCD panel surface with sharp or hard objects. (8) Do not place heavy objects on the LCD display, video cable, or power cord. (9) Do not use abrasive cleaners, waxes or solvents for your cleaning. (10) Do not operate the product under the following conditions: - Extremely hot, cold or humid environment. - Areas containing excessive dust and dirt. - Near any appliance generating a strong magnetic field. - In direct sunlight. 2. Caution No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar with all of the following safety checks and servicing guidelines. 3. Safety Check Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is exposed in such areas as the associated transformer circuits. 4. LCD Module Handling Precautions 4.1 Handling Precautions (1) Since front polarizer is easily damaged, pay attention not to scratch it. (2) Be sure to turn off power supply when connecting or disconnecting input connector. (3) Wipe off water drops immediately. Long contact with water may cause discoloration or spots. (4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. (5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. (6) Since CMOS LSI is used in this module, take care of static electricity and ensure human earth when handling. (7) Do not open or modify the Module Assembly. (8) Do not press the reflector sheet at the back of the module in any direction. (9) In the event that a Module must be put back into the packing container slot after it was taken out of the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged. (10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface Connector of the TFT Module. (11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or ViewSonic Corporation 1 Confidential-Do Not Copy
VA912/b-3
bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module may be damaged. (12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local ordinances or regulations for disposal. (13) The LCD module contains a small amount of materials having no flammability grade. The LCD module should be supplied with power that complies with the requirements of Limited Power Source (IEC60950 or UL1950), or an exemption should be applied for. (14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950 or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit.
Confidential-Do Not Copy
VA912/b-3
Correct methods : Only touch the metal-frame of the panel or the front cover of the monitor. Do not touch the surface of the polarizer .
Incorrect Methods : Surface of the panel is pressed by fingers & this may cause MURA
Take out the monitor with cushion
Take out the monitor by grasping the LCD panel. That may cause MURA.
VA912/b-3
Correct Methods : Place the monitor on a clean & soft foam pad .
Incorrect Methods : Place the monitor on foreign objects . That could scratch the surface of panel
VA912/b-3
2. Specification
2-1General Specifications Test Resolution & Frequency Test Image Size Contrast and Brightness Controls Contrast = 70%, Brightness = 100% 2.2 VIDEO INTERFACE Analog Input Connector Digital Input Connector Default Input Connector Video Cable Strain Relief Video Cable Connector DB-15 Pin out DB-15 (Analog), refer the appendix A DVI-D 24pin, refer the appendix B Defaults to the first detected input Equal to twice the weight of the monitor for five minutes Compliant DDC 2B 1. Video Signals 2. Video RGB (Analog) DVI (Digital) 1280x1024 @ 60Hz Full Size Factory Default:
Separate Video Impedance Maximum PC Video Signal Maximum Mac Video Signal Sync Signals DDC 2B Sync Compatibility Video Compatibility Macintosh computers, and after market video cards 640 x 350*, 640 x 480, 720 x 400* (640 x 400*), 800 x 600, 832 x 624, 1024 x 768, 1152 x 870, 1280 x 720, 1280 x 960, 1280 x 1024 Resolution Compatibility * The image vertical size might not be full screen. But the image vertical position should be at the center. Exclusions Not compatible with interlaced video 75 Ohms (Analog) 950 mV with no damage to monitor 1250 mV with no damage to monitor TTL Compliant with Revision 1.3 Separate Sync Shall be compatible with all PC type computers,
VA912/b-3
2-3
POWER SUPPLY Part Number: 27-D003115 100 TO 240 VAC 50 TO 60 HERTZ Output can be shorted without damage 3.3~4.5 A typical at 5 VDC 3.5 mA (Max) at 254VAC / 60Hz 80 % typical at 115 VAC Full Load Internal and not user replaceable 58 (Max) Watt 1.8 A rms @ 100 VAC, 120A(max) @ 240VAC , 50Hz Shall start and function properly when under full load,
Power Supply (Adapter) Input Voltage Range Input Frequency Range Short Circuit Protection Over Current Protection Leakage Current EFFICIENCY Fuse Power Dissipation Max Input AC Current INRUSH CURRENT (COLD START)
Power Supply Cold Start
with all combinations of input voltage, input frequency, and operating temperature Shall be able to withstand an EN61000-4-4 2KV
Power Supply Transient Immunity transient test with no damage Shall be able to withstand 2KV (L-L) and 2.3KV Power Supply Line Surge Immunity (L-PE) with no damage Shall be able to function properly, without reset or visible Power Supply Missing Cycle Immunity screen artifacts, when cycle of AC power is randomly missing at nominal input The power supply shall not produce audible noise that would be detectable by the user. Audible shall defined Power Supply Acoustics to be in compliance with ISO 7779 (DIN EN27779:1991) Noise measurements of machines acoustics. Power Switch noise shall not be considered Separate 3-prong NEMA 5-15P type plug. Length = US Type Power Cable 1.8m. Connects to display. Color = Black Schuko CEE7-7 type plug. European Type Power Cable Length = 1.8m, Connects to display. Color = Black Separate 3-prong type plug. CCC Type Power Cable Length = 1.8m. Connects to display. Color = Black Power Saving Operation(Method) Power Consumption ViewSonic Corporation VESA DPMS Signaling ON Mode < 58 W (max) 6 Confidential-Do Not Copy
VA912/b-3
ACTIVE OFF < 2 W Recovery Time ON MODE = N/A, ACTIVE OFF < 3 SEC
2-4
ELECTRICAL REQUIREMENT
Horizontal / Vertical Frequency Horizontal Frequency Vertical Refresh Rate Maximum Pixel Clock Sync Polarity 30 82 KHZ 50 85* HZ. 135 MHz (EDID file is 140MHz) Independent of sync polarity.
Timing Table Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Timing 640 x 350 @ 70Hz, 31.5kHz 640 x 400 @ 60Hz, 31.5kHz 640 x 400 @ 70Hz, 31.5kHz 640 x 480 @ 60Hz, 31.5kHz 640 x 480 @ 67Hz, 35.0kHz 640 x 480 @ 72Hz, 37.9kHz 640 x 480 @ 75Hz, 37.5kHz 640 x 480 @ 85Hz, 43.27kHz 720 x 400 @ 70Hz, 31.5kHz 800 x 600 @ 56Hz, 35.1kHz 800 x 600 @ 60Hz, 37.9kHz 800 x 600 @ 75Hz, 46.9kHz 800 x 600 @ 72Hz, 48.1kHz 800 x 600 @ 85Hz, 53.7kHz 832 x 624 @ 75Hz, 49.7kHz 1024 x 768 @ 60Hz, 48.4kHz 1024 x 768 @ 70Hz, 56.5kHz 1024 x 768 @ 72Hz, 58.1kHz 1024 x 768 @ 75Hz, 60.0kHz 1024 x 768 @ 85Hz, 68.67kHz 1152 x 870 @ 75Hz, 68.7kHz 1280 x 1024 @ 60Hz, 63.4kHz 1280 x 1024 @ 75Hz, 79.97kHz 1280x 720 @ 60Hz, 45kHz (HDTV) Analog Yes Yes* Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Digital Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes
Note 1:When Vertical frequency at 85Hz or resolution, the vertical image size might not be full screen. But the ViewSonic Corporation 7 Confidential-Do Not Copy
VA912/b-3
vertical image position should be at the center. Note2: *: The vertical image size might not be full screen.
2-5
AUDIO INTERFACE (SPEAKER SPECIFICATION) 3.5 mm stereo jack 1.0Vrms@1kHz 10k ohm 2W 72db F0 -20kHz (F0 : Lowest resonant freq.) <8% THD @1kHz There should be no audible vibration with volume at
Line input connection Line input signal Line input impedance Maximum power output (Electric) Signal to Noise Ratio Frequency response Distortion Vibration
100%. (Input signal within 1 Vrms) There should be no affect on the screen image
Screen image stability under any conditions Connector PC99 requirement Audio in Cable type / length Lime Green pantone # 577C 3.5mm stereo cable / 1.8m length Note: There is no guarantee <1 W power Audio DPMS consumption in Active Off mode, when the Audio Cable is connected
2-6
TFT LCD PANEL
Panel Source Identify (1) ID label - The panel code B for CMO panel should be shown on the lower right side of ID label. (See Figure 2) (2) UPC label - The panel code B for CMO panel should be shown on the lower right side of UPC label. (See Figure 3)
VA912/b-3
Panel Characteristics:
Model number Type Active Size Pixel Arrangement Pixel Pitch GLASS TREATMENT # OF BACKLIGHTS BACKLIGHT LIFE Luminance (Center) Condition: CT = 6500K, Contrast = Max, Brightness = Max
A190E3 TN type with RSDS interface 376.32 (H) x 301.056 (V) RGB Vertical Stripe 0.294 mm Anti Glare (Hard coating 3H) 4 CCFL (L type); Edge Light BLU 50,000 Hours (min) 280 cd/m2 (Typ after 15 minute warm up) 180 cd/m2 (M in after 15 minute warm up)
U = 76% (typ), 67% (M in). Brightness Uniformity (13 Points) U = Min Luminance in 13 points / Ma x Luminance in 13 points Contrast Ratio Color Depth 450 (typ), 250 (min) 16 million colors (6 bit + 2 bit FRC) @ CR>10 Viewing Angle (Horizontal) Typical: Minimum: @ CR>10 VIEWING ANGLE (VERTICAL) Typical: 130 150 130 @ CR>5 Typical: Minimum: @ CR>5 Typical: Minimum: TBD TBD TBD TBD
Minimum: 110 Response Time 10% -90% @ Ta=25C Panel Defects
8ms (Tr= 2 ms, Tf = 6 ms) (typ) 18 ms (Tr= 7 ms, Tf = 11 ms) (max) Please see Panel Quality Specifications.
VA912/b-3
3. Front Panel Function Control Description
Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. The OSD controls are explained at the top of the next page and are defined in Main Menu Controls on page 10.
Main Menu with OSD controls
Front Control Panel shown below in detail
Displays the Main Menu or exits the control screen and saves adjustments.
Scrolls through menu options and adjusts the displayed control. Also a shortcut to display the Contrast adjustment control screen.
Displays the control screen for the highlighted control. Also toggles between two controls on some screens. Also a shortcut to toggle analog and digital connection.
Audio Mute button turns the sound off
Power light Green = ON Orange = Power Saving
Standby Power On/Off
10
Confidential - Do Not Copy
VA912/b-3
Do the following to adjust the display setting: 1. To display the Main Menu, press button [1].
NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu. 2. To select a control to adjust, press or to scroll up or down in the Main Menu. 3. After the desired control is selected, press button [2]. A control screen like the one shown below appears.
The command line at the bottom of the control screen tells what to do next from this screen. You can toggle between control screens, adjust the selected option, or exit the screen.
4. To adjust the setting, press the up
or down
buttons.
5. To save the adjustments and exit the menu, press button [1] twice. The following tips may help you optimize your display: Adjust the computer's graphics card so that it outputs a 1280 x 1024 @ 60Hz video signal to the LCD display. (Look for instructions on changing the refresh rate in the graphics card's user guide.) If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated active area of the LCD display.)
11
VA912/b-3
Main Menu Controls

Adjust the menu items shown below by using the up
Control Explanation
and down
buttons.
Auto Image Adjust sizes and centers the screen image automatically. Contrast adjusts the difference between the image background (black level) and the foreground (white level). Brightness adjusts background black level of the screen image. Input Select toggles between inputs if you have more than one computer connected to the VA912/VA912b.
Audio Adjust Volume increases the volume, decreases the volume, and mutes the audio. Mute temporarily silences audio output. Color Adjust provides several color adjustment modes, including preset color temperatures and a User Color mode which allows independent adjustment of red (R), green (G), and blue (B). The factory setting for this product is 6500K (6500 Kelvin).
9300K-Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). 6500K-Adds red to the screen image for warmer white and richer red. 5400K-Adds green to the screen image for a darker color.
12
VA912/b-3
Control
Explanation
5000K-Adds blue and green to the screen image for a darker color. User Color Individual adjustments for red (R), green (G), and blue (B). 1. To select color (R, G or B) press button [2]. 2. To adjust selected color, press and . Important: If you select RECALL from the Main Menu when the product is set to a Preset Timing Mode, colors return to the 6500K factory preset. Information displays the timing mode (video signal input) coming from the graphics card in the computer, the LCD model number, the serial number, and the ViewSonic website URL. See your graphics cards user guide for instructions on changing the resolution and refresh rate (vertical frequency). NOTE: VESA 1280 x 1024 @ 60Hz (recommended) means that the resolution is 1280 x 1024 and the refresh rate is 60 Hertz.
Manual Image Adjust Sub-menu
H. Size (Horizontal Size) adjusts the width of the screen image. H./V. Position (Horizontal/Vertical Position) moves the screen image left or right and up or down.
13
VA912/b-3
Control
Explanation
Fine Tune sharpens the focus by aligning text and/or graphics with pixel boundaries. NOTE: Try Auto Image Adjust first. Sharpness adjusts the clarity and focus of the screen image. Setup Menu displays the menu shown below:
Language Select allows the user to choose the language used in the menus and control screens. Resolution Notice allows the user to enable or disable this notice.
If you enable the Resolution Notice shown above and your computer is set at a resolution other than 1280 x 1024, the following screen appears.
OSD Position allows the user to move the OSD menus and control screens. OSD Timeout sets the length of time the OSD screen is displayed. For example, with a 30 second setting, if a control is not pushed within 30 seconds, the display screen disappears.
14
VA912/b-3
Control
Explanation
OSD Background allows the user to turn the OSD background On or Off. Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual.
15
VA912/b-3
4. Circuit Description
Circuit Description 1. Power supply (DC/DC Converter) The AAT1109 is a one-channel step-up PWM controller incorporating a soft-start and a short circuit protection (SCP) function. This device consists of an on-chip voltage reference, error amplifier, pulse width modulation controller, under-voltage lockout protection, soft-start, and short circuit protection circuits.
16
VA912/b-3
2. Micro Controller The MTV312M micro-controller is an 8051 CPU core embedded device especially tailored for CRT/LCD Monitor applications. It includes an 8051 CPU core, 1024-byte SRAM, 14 built-in PWM DACs , VESA DCC interface, 4-channel A/D converter , and a 64K-byte internal program FLASH-ROM.
3. TSU57AK The TSU57AK is a high performance, and fully integrated graphics process IC solution for LCD monitors with resolution up to SXGA. It is configured with an integrated triple-ADC/PLL, a high quality scaling engine, an on-screen display controller, a built-in output clock generator, a panel timing controller (TCON), an integrated DVI receiver, and RSDS display interface. To further reduce system costs, the TSU57AK also integrates intelligent power management control capability for green-mode requirements and spread-spectrum support for EMI management.
17
VA912/b-3
5. Adjusting Procedure A. Function Test and Alignment Procedure

5.1 All Modes Reset You should do All Model Reset (Refer to Chap 3. Hot Keys for Function Controls) first. This action will allow you to erase all end-users settings and restore the factory defaults.
5.2 Auto Image Adjust The Auto Adjust is aimed to offer a best screen quality by built-in ASIC. For optimum screen quality, the user has to adjust each function manually. A.Turn the computer and LCD monitor on. B. Press the Auto button on monitor keypad to Auto Adjust. C. The LCD monitor will start the Auto Adjust process automatically and run for 10 consecutive seconds, during which time you will notice the image change. 5.3 Firmware Test Patten : Burn in Model (Refer to Chap3. Hot Keys for Function Control) -Make sure the F/W is the latest version.
5.4 DCC Test Patten: EDID program -Make sure it can pass test program.
5.5 Window Shut Down Test Signal: 1280*1024@60Hz Test Pattern:
Checkered Pattern Every One Pixel (50%Green & 50%B lue) Inspection Item: Flicker, Mura
5.6 Window BG Test Signal: 1280*1024@60Hz Test Pattern:
Window standard pattern Inspection Item: Line Defect, Function Defect & Mura ViewSonic Corporation 18 Confidential-Do Not Copy
VA912/b-3
5.7 25 Gray Test Signal: 1280*1024@60Hz Test Pattern:
Full Screen 25% White (Gray) Inspection Item: Particle, Line Defect & Mura
5.8 50 Gray Test Signal: 1280*1024@60Hz Test Pattern:
Full Screen 50% White (Gray) Inspection Item: Bright Dot, Particle, Line Defect & Mura
5.9 White Box Test Signal: 1280*1024@60Hz Test Pattern:
Window standard pattern Inspection Item: Particle, Line Defect, Power, Image Remain & Mura
5.10 Black Box Test Signal: 1280*1024@60Hz Test Pattern:
Window standard pattern Inspection Item: Bright Dot, Line Defect & Power
19
VA912/b-3
5.11 RED Test Signal: 1280*1024@60Hz Test Pattern:
Full Screen Red Inspection Item: Bright Dot, Partial & Line Defect
5.12 Green Test Signal: 1280*1024@60Hz Test Pattern:
Full Screen Green Inspection Item: Bright Dot, Partial & Line Defect
5.13 Blue Test Signal: 1280*1024@60Hz Test Pattern:
Full Screen Green Inspection Item: Bright Dot, Partial & Line Defect
5.14 Gray_Scale_0-100_V256 Test Signal: 1280*1024@60Hz Test Pattern:
Vertical 64 (256) Gray Scale (Right LeftAFrom 0 to 100% White) Inspection Item: Line Defect & Function Defect
20
VA912/b-3
5.15 Gray_Scale_0-100_H256 Test Signal: 1280*1024@60Hz Test Pattern:
Horizontal 64(256) Gray Scale (Up DownAFrom 0 to 100% White) Inspection Item: Line Defect & Function Defect
5.16 Block Window Test Signal: 1280*1024@60Hz Test Pattern: Black block at the center
Inspection Item: Cross Talk & Optical Character
5.17 Black_Tile Test Signal: 1280*1024@60Hz Test Pattern: Black tile under white background
Inspection Item: Function Defect & Image Remain
21
VA912/b-3
5-18. Function Test Display pattern
Item 1
Pattern Gray_Scale_0-100_V
Description Vertical 64 (256) Gray Scale (kA From 0 to
Remark Figure 1
100% White) Horizontal 64 (256) Gray Scale (WUA From 0 2 3 4 5 6 7 8 Gray_Scale_0-100_H to 100% White) Black Red Green Blue White Black_Tile Full Screen Black Full Screen 50% Red Full Screen 50% Green Full Screen 50% Blue Full Screen White Black Tile Under White Background Figure 3 Figure 4 Figure 5 Figure6 Figure7 Figure 8 Figure 2
FIGURE 1
FIGURE 2
Figure 3
Figure 4
22
VA912/b-3
Figure 5
FIGURE 5
FIGURE 6
FIGURE 7
FIGURE 8
23
VA912/b-3
B. BIOS update procedure

BIOS Update User Guide BIOS U FLOW FOR GENESIS 1.1 ProgramG 1. 1. 1. Software a. Please download the file M-Star from CMO E-Sir system. There are ISP & BIOS two files, kindly see as below. a) ISPACK.EXE: Main program
b) Ancillary .ISPACK.EXE GDescription program
1.1. 2.Hardwar D_Sub cable ] 15Pin^ Point plug [24Pin]
Point plug
D_Sub cable OR
Without to affect
1.1.3 Join VGA Cable, PC BASE, see the example picture as below.
24
VA912/b-3
1.2 InstallationG A. Please install the programs respectively as below.
B. ISP & BIOS software file to be about to produce the next. (If the file existence already, neednt to set up.
C. repeat.) This system is applied to Win 95/98/NT/2000.
Isp.lnk
1.3 ISP Execution
1. Settings:
Double Click
Isp.lnk
Fig.1: ISP Tool Main Menu
25
VA912/b-3
2. When ISP Tool executing at the first time, it is required to enter Security
Data Please press , then input related information as Fig.2.
4C
7C 4C 77 For A190E3
Key in OK
3. Select correct Micro Controller as Fig.3.
Step 2 Load MCU File
Step 1 Select MTV312M64
26
VA912/b-3
4. Installation software, Select
want download
correct file
Step 4 Press RUN
Step 3 Example : The path of software
27
VA912/b-3
1.4.Verification BIOS Update whether success

5. When everything is done. Please turn off the power and restart it again. Check Factory Mode and make sure it already be updated.
28
VA912/b-3
C. Monitor Assembly and Disassembly 1. Separate Stand Assy 1.1 Remove Stand Cover
Step 1 : Press Stand Assy bottom part in s Seat Hinge.
Step 2 : Remove Cover Hinge.
Step 3 : Loose and Remove 4 screws.
Step 4: Remove Stand Assy.
Step 5: Completed
ViewSonic Corporation 29 Confidential-Do Not Copy
VA912/b-3
2. Separate Rear Cover (Rear Case Assy) Loosen and remove 5 screws. Separate Bezel hooks to take Bezel and Rear Cover apart.
Step 1 : Loose and remove 2 screws.
Step 2 : Separate Bezel hooks to take Bezel and Rear Cover apart.
Step 3 : Remove Rear Cover.
Step 4 : Completed
30
VA912/b-3
3. Remove Power Board 3.1 Remove 2 pieces of Backlight wires.
3.2 Remove Metal Cover Step 1 : Loose and remove 4 screws.
31
VA912/b-3
Step 4 : Remove the Cover of X-PCB.
Step 5 : Completed
3.3 Remove Power PCBA
Step 1 : Insert 2 pieces of Backlight wires.
32
VA912/b-3
Step 3 : Remove Power PCBA.
Step 4 : Completed
33
VA912/b-3
4. Change New Power Board
Step 1 : Insert New Power PCBA.
Step 2 : Fasten 4 fixed screws of Power PCBA .
Step 3 : Completed
5. Remove AD PCBA 5.1 Remove FFC Step 1 : Remove 2 FFC from AD PCBA.
34
VA912/b-3
Step 2 : Remove FFC
5.2 Remove AD PCBA
Step 1 : Loose and remove 4 screw
Step 2 : Remove AD PCBA.
35
VA912/b-3
Step 3 : Completed
6. Change New AD PCBA
Step 1 : Place New AD PCBA.
Step 2 : Fasten 4 screw.
Step 3 : Insert FFC.
36
VA912/b-3
Step 4 : Insert 2 FFC.
Step 5 : Completed
7 Remove OSD PCBA
Step 1 : Remove FFC.
Step 2 : Separate both Audio Cable.
Step 3 : Take OSD PCBA apart.
37
VA912/b-3
Step 4 : Completed.
8. Change New OSD PCBA
Step 1 : Place New OSD PCBA.
Step 2 : Insert Audit Cable to connectors of OSD PCBA.
Step 3 : Completed.
38
VA912/b-3
9. Add Cover to AD PCB Heatsink
Step 1 : Join the cover hooks of X-PCB.
Step 2 : Fasten the 4 screws.
Step 3 : Fasten 2 screws.
Step 4 : Fasten the 4 screws.
Step 5 : Completed
39
VA912/b-3
10. Rear Assy Assembly
Step 1 : Place Rear Cover.
Step 2 : Join Rear Cover with Bezel.
Step 3 : Fasten 2 screws.
Step 4 : Completed
40
VA912/b-3
11. Stand Assy Assembly
Step 1 : Place Stand Assy .
Step 5 : Fasten 4 screws to fixed Stand Assy.
Step 6 : Insert Cover Hinge.
Step 7 : Place Stand Assy.
41
VA912/b-3
6. Trouble Shooting Flow Chart

Defect Mode Failure Analysis Repair Testing
Light On Test
Panel Change Should be Performed to Level 3 Repair stage

Check PCB Check Panel Bright Dot Dark Dot Backlight Light Leakage Mura Image Sticking Brightness spot Particle Dot Defect No display Check PCB AD/B Change P/B Change CNT/B Change Check Panel Check Wire Noise Check PCB Check Panel Panel Change D-sub cable change AD/B Change Panel Change Check Panel Panel Change AD/B Change Panel Change
Missing Line
Abnormal Display
N
Next Step
TEST
Completed
42
VA912/b-3
Defect Mode
Failure Analysis
Repair
Testing
Panel Chan e Should be Performed to Level 3 Repair stage

Flicker Check PCB AD/B Change P/B Change Check Panel Panel Change
Gray value display
Check PCB Check Panel
AD/B Change Panel Change
R.G.B display abnormal
Check PCB
AD/B Change CNT/B Change
Check Panel Check Wire Display Shut Down Check Panel No signal Check PCB Check PCB
Panel Change D-sub cable change AD/B Change P/B Change Panel Change AD/B Change CNT/B Change
Check Wire Power on Display abnormal
D-sub cable change AD/B Change Panel Change
Check PCB Check Panel
Next Step
NG
TEST
Completed
43
VA912/b-3
Defect Mode
Failure Analysis
Repair
Testing
Panel Change Should be Performed to Level
3 Repair stage
ON/OF Abnormal
No Power
Check PCB
AD/B Change P/B Change CNT/B Change
Check Wire
PW cable Change OSD cable Change
LED display abnormal LED Off LED Dark Check PCB
AD/B Change
P/B Change LED Abnormal OSD cable Change LED Flicker Check Wire Power wire connector Cable change
Abnormal Keyboard Unavailable Check PCB AD/B Change P/B Change Check Wire OSD cable Change
NG
Next Step
TEST
Completed
44
VA912/b-3
Defect Mode
Failure Analysis
Repair
Testing
Panel Change Should be Performed to Level
3 Repair stage
Abnormal BIOS &OSD
Cant Input
Check PCB
AD/B Change CNT/B Change
Cant Reader
Check Wire
D-sub cable change
Other Abnormal Display
Display Shut Down
Check PCB
AD/B Change P/B Change CNT/B Change
Check Panel Display flicker (tapping ) Check Panel Check PCB
Panel Change AD/B Change CNT/B Change P/B Change
Next Step
NG
TEST
Completed
45
VA912/b-3
Trouble Shooting Analysis
Check the information in this section to see if the problems can be solved before requesting repair. NoteG The consumers are only allowed to solve the problems described as below. Any unauthorized product modification, or failure to follow instructions supplied with the product will end the warranty immediately. l No image u u Make sure power button is ON. Check whether the LCD monitor and computer power cords are plugged and whether there is a supply of power.
No Signal Input u Check the signal connection between the computer and LCD monitor.
Out of Range u Check the computer image output resolution and frequency and compare the value with the preset values (Please refer to [Appendix-Display Mode]).
Fuzzy Image u Adjust Phase.
Image too bright u Adjust brightness and contrast by OSD.
Image too dark u Adjust brightness and contrast by OSD.
Irregular image u u Check the signal connection between the computer and LCD monitor. Perform Auto Adjust.
Distorted image u u Reset the LCD monitor Take off e xtra accessories (such as signal extension cord).
Image is not centered u u u Use OSD Image Menu to adjust H_Position and V_Position. Check image size setting. Perform Auto Adjust.
Size is not appropriate 46 Confidential-Do Not Copy
VA912/b-3
u u u
Use OSD Image Menu to adjust H_Position and V_Position. Check image size setting. Perform Auto Adjust.
Use OSD Color Menu to adjust color setting.
Color too dark u Use OSD Color Menu to adjust color setting.
Dark area distorted u Use OSD Color Menu to adjust color setting.
White color is not white u Use OSD Color Menu to adjust color setting.
47
VA912/b-3
7.
Recommend Spare Parts List (RSPL)

RECOMMENDED SPARE PARTS LIST (VA912-3)
ViewSonic Model Number: VS10931-1W Rev: 1a Serial No. Prefix: PUQ Description Ref. P/N Item ECR/ECN ViewSonic P/N Location Universal number# Adapter, Lips Without Audio, DAC-19M001 A-00004021 Accessories: 27-D003115 27-D003115 BF, Ver:00 A, 19 V/2.5 A, 5 V/3 A, 4L, 4.9 1 mA, 2380 V 32E1818018 A-00002059 Power Code, CEE, SP-023+IS-14, H05VV-F, 32E1818018 (AJ0E3H1E1F/2F) 3G, 0.75mm2, CT-12, L=1800+/-50mm, I2 (AJ0E3H1K1F/2F) SHENG, 18AWG, Black, No Bag Power Code, UL, SVT#18/3C, 75J , LPA-00000458 32E1818015 32E1818015 30B+LS-13, L=1830+/-50mm, Black, (AJ0E3H1A1F/2F) 3 Linetek, 18AWG, No Bag A-00002058 Power Cord CCC, 300/500V, 0.75mm2, 3C, 32E1818013 32E1818013 PC-323+COC-01, L=1830+/-50mm, Black, (AJ0E3H1C1F/2F) 4 Linetek, 18AWG, No Bag A-00002057 Power Cord, BSI, H05VV-F, 0.75mm2, 3C, 32E1818060 32E1818060 LP-60L+LS-60, L=1830+/-50mm, Black, (AJ0E3H1K1F/2F) 5 18AWG, PSB Mark, Linetek, No Bag 32-D001922 Power Cord, VCTF 3G 0.75mm^2 CNS CTA-00004047 32-D001922 6 (AJ0E3H1W1F/2F) 08, Black, BSMI, 1800 mm, I Sheng B-00004022 Board Assembly: PCBA for , A190E3, A190E3-H-S1, 301-72, 35-D004062 35-D004062 7 Rev.07 B-00004023 PCBA for , A190E3, A190E3-T-K, 303-02, 35-D002998 35-D002998 8 Rev.31 40-D003819 Bezel Assy, A190E3-H0F, SILVER C-00004025 (AJ0E3H1A.C.E.K.W2F 40-D003819 PANTONE 877C, Injex 9 ) 40-D003812 Cover Hinge, A190E3-H0F, ABS PA-757N, C-00004026 (AJ0E3H1A.C.E.K.W2F 40-D003812 BLACK C_J91A11B5, Injex 10 ) 40-D003818 Rear Assy, A190E3-H0F, BLACK C, Injex C-00004028 (AJ0E3H1A.C.E.K.W2F 40-D003818 11 ) 40-D003821 Seat Assy, A190E3-H0F, BLACK C, Hontech C-00004030 (AJ0E3H1A.C.E.K.W2F 40-D003821 Precision Industry 12 ) 40-D003820 Stand Assy, A190E3-H0F, BLACK C, C-00004032 (AJ0E3H1A.C.E.K.W2F 40-D003820 Hontech Precision Industry 13 ) Audio Cable, A150X2, 18AWG, 180cm, CB-00000544 Cables: 32F2818004 32F2818004 14 Black, JCE FFC_X, 0.50x45x62xCx(5/5)x(0.175x0.3), 45 CB-00004034 32-D000557 32-D000557 15 Pins, no AL foil Monitor Cable, A150X2, 30AWG, 180cm, CB-00000547 32F3018003 32F3018003 16 Black, JCE 17 32-D003899 32-D003899 FFC-OSD, 22 Pins, TennRich CB-00004035 77-D004154 DC-00004036 Documentation: Carton Label for , A190E3-H0F, 20 mmx20 77-D004154 18 mm, Chang Huang, VSC_VA912-3 77-D004123 Carton Label for , A190E3-H0F, 76.2 DC-00004037 (AJ0E3H1A.C.E.K.W2F 77-D004123 mmx76.2 mm, Chang Huang, VSC(VA912-3) 19 ) 20 7741519181 7741519181 Label, Bar-Code Labe, 55*13mm DC-00002073 76-D004095 MENU for VSC_VA912-3, Paper, 1C, YiDC-00004039 (AJ0E3H1C.E.K.W1F/2 76-D004095 Ching Special Printing, A190E3-H0F 21 F) MENU for VSC_VA912-3+Caution Card, DC-00004040 76-D004134 76-D004134 Paper, 1C, Yi-Ching Special Printing, (AJ0E3H1A1F/2F) 22 A190E3-H0F 77-D004087 Safety Label for , A190E3-H0F, 120 mmx50 DC-00004041 (AJ0E3H1A.C.E.K.W2F 77-D004087 mm, Chang Huang, VSC_VA912-3 23 )
Q'ty 1
1 1 1 1 1
1 1 2 1 1 1 1 1 1
48
VA912/b-3
Item 24 Hardware: 25
Description ECR/ECN ViewSonic P/N Screw, M3*P0.5*4, f 5.5*2 HW-00000553 Screw, M3*P1.27*12, f 5.5*2 HW-00000556 SCREW, M4, P=0.7 mm, L=15 mm, Special HW-00002442 Thin Head, Phillips Cross Recess, Screw_with_Washer, SHYE CHING SCREW SCREW, M4, P=0.7 mm, L=8 mm, Round Head, Phillips Cross Recess, plate Ni, Screw_with_Washer, SHYE CHING SCREW, head D8 Stand-Off 4 #-40*11.8 Tape, Security Tape, OPP, L900xW50x0.045mm, VSC Carton, A190E3-H0F, 536 mmx148 mmx475 mm, Chen Ti Paper, VSC_VA912-3 Cushion, A190E3-H0F, PE_LD, White, 530 mmx140 mmx50 mm, N/A, Hwa Chang, PE_Foam(BOTTOM) Cushion, A190E3-H0F, PE_LD, White, 530 mmx140 mmx50 mm, N/A, Hwa Chang, PE_Foam(TOP) Inner Box, 456x290x38mm, A190E1-H01 PE Foam Bag, Protector, 570*600*0.13, A190E1-H01, white HW-00004042
Ref. P/N 42A9930008 42A9990005 42-D000314
Location Universal number# 42A9930008 42A9990005 42-D000314
Q'ty 2000 2000 2000
26 42-D000649 M-00000559 M-00000560 P-00004043 42A9940007 7345511002 42-D000649

42A9940007
2000 2000 1 1
27 28 Miscellaneous: 29 Packing Material: 30
7345511002
78-D004088 (AJ0E3H1A.C.E.K.W2F 78-D004088 ) 78-D003913 78-D003913
P-00004045 1
31
P-00004046 78-D003911 P-00000594 P-00000595 7841935111 7841919921 78-D003911 7841935111 7841919921 1 1 1
32 33 34
49
VA912/b-3
RECOMMENDED SPARE PARTS LIST (VA912b-3)

ViewSonic Model Number: VS10931-1W Rev: 1a Serial No. Prefix: PUR Description Ref. P/N Location Universal number# Item ECR/ECN ViewSonic P/N Adapter, Lips Without Audio, DAC-19M001 BF, Ver:00 A-00004021 Accessories: 27-D003115 27-D003115 A, 19 V/2.5 A, 5 V/3 A, 4L, 4.9 mA, 2380 V 1 Power Code, CEE, SP-023+IS-14, H05VV-F, 3G, A-00002059 32E1818018 32E181801 0.75mm2, CT-12, L=1800+/-50mm, I-SHENG, 18AWG, (AJ0E3H1E1F/2F) 8 Black, No Bag (AJ0E3H1K1F/2F) 2 Power Code, UL, SVT#18/3C, 75J , LP-30B+LS-13, A-00000458 32E1818015 32E181801 L=1830+/-50mm, Black, Linetek, 18AWG, No Bag (AJ0E3H1A1F/2F) 5 3 Power Cord CCC, 300/500V, 0.75mm2, 3C, PCA-00002058 32E1818013 32E181801 323+COC-01, L=1830+/-50mm, Black, Linetek, 18AWG, (AJ0E3H1C1F/2F) 3 4 Power Cord, BSI, H05VV-F, 0.75mm2, 3C, LP-60L+LSA-00002057 32E1818060 32E181806 60, L=1830+/-50mm, Black, 18AWG, PSB Mark, (AJ0E3H1K1F/2F) 0 5 Linetek, No Bag 32-D001922 32A-00004047 Power Cord, VCTF 3G 0.75mm^2 CNS CT-08, Black, 6 (AJ0E3H1W1F/2F) D001922 BSMI, 1800 mm, I Sheng 35-D004062 PCBA for , A190E3, A190E3-H-S1, 301-72, Rev.07 B-00004022 35-D004062 7 Board Assembly: 35-D002998 8 35-D002998 PCBA for , A190E3, A190E3-T-K, 303-02, Rev.31 B-00004023 40-D003822 40Bezel Assy, A190E3-H0F, Midnight Gray, Injex C-00004024 Cabinets: 9 (AJ0E3H1A.C.E.K.W1F) D003822 40-D003808 40Cover Hinge, A190E3-H0F, ABS PA-757N, Midnight C-00004027 10 (AJ0E3H1A.C.E.K.W1F) D003808 Gray_H93828B5, Injex 40-D003817 40Rear Assy, A190E3-H0F, Midnight Gray, Injex C-00004029 11 (AJ0E3H1A.C.E.K.W1F) D003817 40-D003815 40Seat Assy, A190E3-H0F, Midnight Gray, Hontech C-00004031 12 (AJ0E3H1A.C.E.K.W1F) D003815 Precision Industry 40-D003816 40Stand Assy, A190E3-H0F, Midnight Gray, Hontech C-00004033 13 (AJ0E3H1A.C.E.K.W1F) D003816 Precision Industry Audio Cable, A150X2, 18AWG, 180cm, Black, JCE CB-00000544 32F2818004 32F2818004 14 Cables: CB-00004034 FFC_X, 0.50x45x62xCx(5/5)x(0.175x0.3), 45 Pins, no 32-D000557 32-D000557 15 AL foil Monitor Cable, A150X2, 30AWG, 180cm, Black, JCE CB-00000547 32F3018003 32F3018003 16 32-D003899 17 32-D003899 FFC-OSD, 22 Pins, TennRich CB-00004035 Carton Label for , A190E3-H0F, 76.2 mmx76.2 mm, DC-00004038 Documentation: 77-D004122 77Chang Huang, VSC(VA912b-3) (AJ0E3H1A.C.E.K.W1F) D004122 18 7741519181 19 7741519181 Label, Bar-Code Labe, 55*13mm DC-00002073 76-D004095 MENU for VSC_VA912-3, Paper, 1C, Yi-Ching Special DC-00004039 76(AJ0E3H1C.E.K.W1F/2F Printing, A190E3-H0F D004095 20 ) MENU for VSC_VA912-3+Caution Card, Paper, 1C, YiDC-00004040 76-D004134 76Ching Special Printing, A190E3-H0F (AJ0E3H1A1F/2F) D004134 21 77-D004094 77Safety Label for , A190E3-H0F, 120 mmx50 mm, Chang DC-00004048 22 (AJ0E3H1A.C.E.K.W1F) D004094 Huang, VSC_VA912b-3 42A9930008 23 Hardware: 42A9930008 Screw, M3*P0.5*4, f 5.5*2 HW-00000553 42A9990005 24 42A9990005 Screw, M3*P1.27*12, f 5.5*2 HW-00000556 SCREW, M4, P=0.7 mm, L=15 mm, Special Thin Head, HW-00002442 Phillips Cross Recess, Screw_with_Washer, SHYE 42-D000314 42-D000314 CHING SCREW 25 SCREW, M4, P=0.7 mm, L=8 mm, Round Head, Phillips HW-00004042 42-D000649 42-D000649 Cross Recess, plate Ni, Screw_with_Washer, SHYE 26 CHING SCREW, head D8 42A9940007 27 42A9940007 Stand-Off 4 #-40*11.8 M-00000559 Tape, Security Tape, OPP, L900xW50x0.045mm, VSC M-00000560 7345511002 7345511002 28 Miscellaneous: Carton, A190E3-H0F, 536 mmx148 mmx475 mm, Chen P-00004044 78-D004092 78Packing Material: Ti Paper, VSC_VA912b-3 (AJ0E3H1A.C.E.K.W1F) D004092 29 Cushion, A190E3-H0F, PE_LD, White, 530 mmx140 P-00004045 78-D003913 78-D003913 mmx50 mm, N/A, Hwa Chang, PE_Foam(BOTTOM) 30 Cushion, A190E3-H0F, PE_LD, White, 530 mmx140 P-00004046 78-D003911 78-D003911 31 mmx50 mm, N/A, Hwa Chang, PE_Foam(TOP) Inner Box, 456x290x38mm, A190E1-H01 P-00000594 7841935111 7841935111 32 PE Foam Bag, Protector, 570*600*0.13, A190E1-H01, P-00000595 7841919921 7841919921 33 white
Q'ty 1
1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2000 2000 2000
2000 2000 1 1 1 1 1 1
50
VA912/b-3
BOM LIST (VA912/b-3)

ViewSonic Model Number: VS10931-1W Rev: 1a Item ViewSonic P/N Ref. P/N 1 #N/A MJ0E501K01 2 #N/A L3J005XXXX 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A #N/A CB-00004034 #N/A HW-00000556 HW-00000553 HW-00004042 #N/A #N/A A-00004021 C-00004030 B-00004023 CB-00004035 HW-00002442 M-00000559 #N/A #N/A B-00004022 7414119023 7414119024 36-D001339 36X8002971 7344191017 73-D002676 73-C000047 35-D002646 7349951002 PJ0EFH0Q06 44-D003904 41-D002813 32-D000557 41-D000546 42A9990005 42A9930008 42-D000649 41-D000632 73-D004702 27-D003115 40-D003821 35-D002998 32-D003899 42-D000314 42A9940007 73-D001960 73-D002812 35-D004062
Description 19" Semi Product,19E5-L01,Default 19"E5 TN PS Asahi 0.7mm glass CF Polarizer M190E5,383.15x307.85x0.215,135,Optimax LPTHL56-T12AGA1SU TFT Polarizer M190E5,380.52x304.13x0.215,135,Optimax LPTHL56-T12SU Driver IC,Scan,A170E1,HX8633CPD400,256Channel Driver IC,COF,Data,HX8002CB97,COF,A190E3-H&M190E5L01,384Channel ACF,AC-4251FY-16,100M/RL ACF,PCB,AC-9825R-35,100000 mmx1.5 mm ACF,COG,AC-8405Z-23 1.5mmX100M,100000 mmx1.5 mm PCBA for ,A190E3-H,A190E3-H-X,301-03,Rev.03 Silicone,TORAY/-9187L,,330g Olympic,A190E3,Function BOM,D-sub+DVI+Audio,Morning Star, Backlight Unit,A190E3 Metal Frame Front Assy,A190E3,assy FFC,0.50x45x62xCx(5/5)x(0.175x0.3),45 Pins Cover AD Assy,A190E3,ASSY Screw,M3*P1.27*12 Screw,M3*P0.5*4 SCREW,M4,P=0.7 mm,L=8 mm,Round Head,Phillips Cross Recess,plate Ni,Screw_with_Washer PCBA Cover Assy,A190E3,ASSY Isolated Tape,PET,147 mmx137 mmx0.1 mm Lips Without Audio,DAC-19M001 BF,Ver:00 A,19 V/2.5 A,5 V/3 A,4L,4.9 mA,2380 V Seat Assy,A190E3-H0F,BLACK C PCBA for ,A190E3,A190E3-T-K,303-02,Rev.31 FFC,22 Pins SCREW,M4,P=0.7 mm,L=15 mm,Special Thin Head Stand-Off 4 #-40*11.8 Spacer,tape,BLACK,308 mmx2 mmx0.1 mm Spacer,polyester film,black,379 mmx2.5 mmx0.08 mm PCBA for ,A190E3,A190E3-H-S1,301-72,Rev.07
Location common common common common common common common common common common
Q'ty 1 1 1 1 1 10 0.00398 0.00398 0.00398 1 0.4 1 1 1 2 1 15 1 1 1 1 1 1 1 4 4 2 2 1
common common common common common common common common common
common common common common
31 32 33 34
#N/A CB-00000544 CB-00000547 #N/A
PJ0EAAS000(A1F.A2F) PJ0EACS000(C1F.C2F) PJ0EAET000(E1F.E2F) PJ0EAKU000(K1F.K2F) PJ0EAW5000(W1F.W2F) 32F2818004 32F3018003 32-D001922
Olympic,19",Accessory BOM,D-sub+Audio,USA 3 pin,Black,Power built-in;RoHS Olympic,19",Accessory BOM,D-sub+Audio,China 3 pin,Black,Power built-in;RoHS Olympic,19",Accessory BOM,D-sub+Audio,European / Korea 2 pin,Black,Power built-in;RoHS Olympic,19",Accessory BOM,D-sub+Audio,None,Black,Two power cords of UK & EU for VSC,Power built-in;RoHS Olympic,19",Accessory BOM,D-sub+Audio,Taiwan 3 pin,Black,Power built-in;RoHS Audio Cable,A150X2,18AWG,180cm,Black,JCE common Monitor Cable,A150X2,30AWG,180cm,Black,JCE common Power Cord,VCTF 3G 0.75mm^2 CNS CT-08,Black,BSMI,1800 mm W1F.2F
1 1 1 1
51
VA912/b-3
Item
ViewSonic P/N
Ref. P/N
Description Olympic,A190E3,ID BOM,D-sub+DVI+Audio,USA,Black,VSC, Olympic,19",ID BOM,D-sub+DVI+Audio,USA,Silver Black,VSC, Olympic,A190E3,ID BOM,D-sub+DVI+Audio,China,Black,VSC, Olympic,A190E3,ID BOM,D-sub+DVI+Audio,China,Silver Black,VSC, Olympic,A190E3,ID BOM,Dsub+DVI+Audio,European,Black,VSC, Olympic,A190E3,ID BOM,D-sub+DVI+Audio,European,Silver Black,VSC, Olympic,A190E3,ID BOM,D-sub+DVI+Audio,UK,Black,VSC, Olympic,A190E3,ID BOM,D-sub+DVI+Audio,UK,Silver Black,VSC, Olympic,A190E3,ID BOM,D-sub+DVI+Audio,TWN,Black,VSC, Olympic,A190E3,ID BOM,D-sub+DVI+Audio,TWN,Silver Black,VSC, Bezel Assy,A190E3-H0F,SILVER PANTONE 877C Rear Assy,A190E3-H0F,BLACK C Stand Assy,A190E3-H0F,BLACK C Cover Hinge,A190E3-H0F,ABS PA-757N Software (EDID_DSUB),A190E3,Ver.NRVSCxxxxA00,ViewSonic,Checksum(xx),Anal og Port Software (EDID_DVI),A190E3,Ver.NRVSCxxxxD00,ViewSonic,Checksum(x x),DVI Port Software (BIOS),A190E3,Ver.NR19E3HS3000,ViewSonic,Checksum(xxxx), RSDS,Dual+Audio Panel Protector Film,A190E2-H06,mylar Tape,Security Tape,OPP,L900xW50x0.045mm,VSC Safety Label for ,A190E3-H0F SN Label for ,A190E3-H0F Label,Bar-Code Labe Label,Pallet Barcode Label Carton Label for ,A190E3-H0F Cushion,A190E3-H0F,PE_LD,White,530 mmx140 mmx50 mm Cushion,A190E3-H0F,PE_LD,White,530 mmx140 mmx50 mm Inner Box,456x290x38mm, A190E1-H01 Carton,A190E3-H0F PE Foam Bag,Protector,570*600*0.13,A190E1-H01,white Corner Protector Separator,1130x955x11,A190E1-H01 Pallet,A170E1-H01,Wooden,1150 mmx920 mmx135 mm MENU for VSC_VA912-3,Paper,1C,A190E3-H0F Shipping Package Information for ,A190E3-H0F,VSC
Location
Q'ty
35 36 37 38 39
#N/A C-00004025 C-00004028 C-00004032 C-00004026
PJ0EI1F300(A1F) PJ0EI2F300(A2F) PJ0EI1F303(C1F) PJ0EI2F303(C2F) PJ0EI1F301(E1F) PJ0EI2F301(E2F) PJ0EI1F302(K1F) PJ0EI2F302(K2F) PJ0EI1F304(W1F) PJ0EI2F304(W2F) 40-D003819 40-D003818 40-D003820 40-D003812
A.C.E.K.W2F A.C.E.K.W2F A.C.E.K.W2F A.C.E.K.W2F
1 1 1 1 1
40
#N/A
10-D003929
common
41
#N/A
10-D003930
common
42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
#N/A P-00002378 #N/A DC-00004041 #N/A #N/A #N/A DC-00004036 P-00004045 P-00004046 #N/A P-00004043 #N/A #N/A #N/A #N/A DC-00004039 #N/A
10-D003931 73-D001222 7345511002 77-D004087 77-D004093 7741519181 7741513161 77-D004154 78-D003913 78-D003911 7841935111 78-D004088 7841919921 7841595111 7841995111 78-D001493 76-D004095 79-D003912
common common common A.C.E.K.W2F A.E.K.W2F common common common common common common A.C.E.K.W2F common common common common C.E.K.W2F common
1 1 0.058 1 1 1 0.021 1 1 1 1 1 1 0.083 0.021 0.021 1 1
52
VA912/b-3
8.
Exploded Diagram and Exploded Parts List
Model Title Date Rev:
53
VA912/b-3
EXPLODED PARTS LIST (VA912/b-3)

ViewSonic Model Number: VS10931-1W Rev: 1a Item ViewSonic P/N Ref. P/N 1 #N/A PJ0EFH0Q06 2 C-00004025 40-D003819 2-1 #N/A 40-D003809 2-2 #N/A 40-D003811 2-3 #N/A 40-D003805 2-4 #N/A 33-D000377 2-5 #N/A 42-D001524 2-6 #N/A 77-D000226 2-7 #N/A 77-D000224 3 #N/A 73-D004605 4 #N/A 73-D005094 5 C-00004028 40-D003818 5-1 #N/A 40-D003813 5-2 #N/A 41-D003804 5-3 HW-00000557 42A9930017 5-4 #N/A 40-D000227 6 HW-00000556 42A9990005 7 C-00004032 40-D003820 8 HW-00002442 42-D000314 9 C-00004026 40-D003812 10 C-00004030 40-D003821 10-1 #N/A 40-D003801 10-2 #N/A 40A1769201
Description Q'ty ISM_A190E3_HAT 1 Bezel Assy,A190E3-H0F,SILVER PANTONE 877C 1 BEZEL 1 LENS 1 KEYPAD 1 SPEAKER 4 ohm 2W 2 SCREW T2.5*10L 4 VSC BIRDLOGO 1 VSC NAME PLATE 1 MYLAR PCBX 1 MYLAR LIGHT LEAKAGE 1 Rear Assy,A190E3-H0F,BLACK C 1 REAR 1 SUPPORT PLATE 1 SCREW T3*8L 1 RUBBER CAP 4 Screw,M3*P1.27*12, 2 Stand Assy,A190E3-H0F,BLACK C 1 SCREW,M4,P=0.7 mm,L=15 mm 4 COVER HINGE , A190E3-H0F 1 Seat Assy,A190E3-H0F,BLACK C 1 SEAT 1 RUBBER FOOT 6
54
VA912/b-3
9. Block Diagram
OSD Key Pad / Audio Out
Speaker
Audio In 3.3V DVI-D Digital Video D-sub Analog Video DC/DC Main Board Signal
LCD Module
DC-5V DC-19V AC Power LIPS Backlight
55
VA912/b-3
10.
Schematic Diagrams
B1
B10
PANEL_INTERFACE
B2
V5A
VGA
VGA_5V
DDC_CLK DDC_DAT
DDC_CLK DDC_DAT
V5A_ESD
V5A_ESD
B3
RIN GNDR GIN GNDG SOG BIN GNDB HSYNC VSYNC
OR0N OR0P OR1N OR1P OR2N OR2P

OG0N OG0P OG1N OG1P OG2N OG2P
V5A_ESD
DVI
V5A
R+ RG+ GB+ BCLK+ CLK-
OB0N OB0P OB1N OB1P OB2N OB2P

OCLKP OCLKN

OCLKP OCLKN
V5A
OCLKP OCLKN
B4
B7
OSD
V5A
LED_OR LED_GR SOURCE_SELECT MENU KEY_DOWN KEY_UP AUTO_ADJ PWR_SW
V5A
AUDIO_ON
LED_OR LED_GR SOURCE_SELECT MENU KEY_DOWN KEY_UP AUTO_ADJ PWR_SW
AUDIO_ON
OPTION1
OPTION1
OPTION2
INV_ON/OFF DCDC_ON/OFF PANEL_ON/OFF VCM_PWM XAO
OPTION2
VOL1
DDC_CLK VGA_5V DDC_DAT OPTION1 OPTION2 MCU LED_OR LED_GR SOURCE_SELECT CSZ MENU SCL KEY_DOWN SDA KEY_UP HWRESET AUTO_ADJ INT PWR_SW AD0 V5A AUDIO_ON AD3 INV_ON/OFF AD1 AD2 DCDC_ON/OFF PANEL_ON/OFF VCM_PWM XAO
ER0N ER0P ER1N ER1P ER2N ER2P

CSZ SCL SDA HWRESET INT AD0 AD3 AD1 AD2
SCALER
EG0N EG0P EG1N EG1P EG2N EG2P
EB0N EB0P EB1N EB1P EB2N EB2P

ECLKP ECLKN
VOL1
B5
INV_ADJ VOL1
ECLKP ECLKN

ECLKP ECLKN
ESTH OSTH
DCDC_ON/OFF
VGH
ESTH OSTH
ESTH OSTH
VGH
VGL
VGL
VAA
DC/DC
V18C V33C
VAA V5 V5A
B6
STB POL STV CKV OE GVON GVOFF
XAO
VGH
VGL
VAA
VCM
PANEL_ON/OFF GMA[1..14] VCM_PWM
GMA[1..14]
V33P
GMA[1..14]
VCM
V33C
INVERTER I/F
V33C V5
V5A
VAA
V18C
B9
VCM
V33P
V18C
V33P
V5A
POWER
INV_ON/OFF
INV_ADJ
INV_ADJ
V33C
TOP
56
VA912/b-3
V5A
V5A1
V5A
TP
VAA
VAA
VAA1
TP
VGH
VGH1
VGH
TP
VGL
VGL1
VGL
TP
DCDC_ON/OFF
D34
CP36
QP18
RP16
RP14
RP15
CP28
RP20
CP3
CP15
3
CP11
CP25
D3
VGL
ZDP6
CP6
CP4
CP2
CP9
GND_POWER
RP19
GND_POWER
3
GND_POWER
QP17 1
2
RP12
VAA
CP1
RP31
V5
V5A
FP1
LP3
V5
GND_POWER
CP17
GND_POWER
1
DP1
2
2
QP13
D2
3
CP14
VAA
RP48
LP4
CP16
CP13
RP49
LP5
LP6
RP8
3
RP7
QP2
1
GND_POWER
GND_POWER
GND_POWER
2
[INV_GND]
V5A
GND_POWER
V5A
CP10
GND_POWER
RP11
RP32
2
1
CP18
GND_POWER
RP3
UP1
OUT BR/CTL
SCP
QP4
DCDC_ON/OFF
1
2
VCC
IN-
GND
OSC
GND_POWER
FB
(High --> Enable)
RP1
RP6
GND_POWER
RP37
CP21
CP19
CP20
GND_POWER
CP37
GND_POWER
GND_POWER
1 CE
UP2
OUT
VCC
SCP
RR1
GND
OSC
FB 7
IN-
CP38
RP50
CP39
RP52
RP53
RP51
CP40
RP54
GND_POWER
GND_POWER
DC/DC
57
VA912/b-3
V5A_ESD
CON1
V5A_ESD
R G B RGB GND HSYNC VSYNC SYNC GND DDC SCL DDC SDA +5V HPD
25 26 27 29 28 8 15 6 7 14 16
R7
R5
R6
V5A
V5A
D7
1/3shield 2/4shield 0/5shield clk shield

DAT0+ DAT0DAT1+ DAT1DAT2+ DAT2DAT3+ DAT3DAT4+ DAT4DAT5+ DAT5clk+ clk-
11 3 19 22
2
18 17 10 9 2 1 13 12 5 4 21 20 23 24
D4
D5
D8
U2
C163
R9
R10
1 2 3 4
NC NC NC GND
VCC VCLK SCL SDA
8 7 6 5
R11
R12
GND_POWER
GND_POWER
R13
R14
R15
R16
R17
R18
R19
GND_POWER
D9
D10
D11
D12
R20
D13
D14
D15
D16
V5A
R213
V5A_ESD
C31
C32
C33
C34
C35
C36
C37
C38
D17
C39
GND_POWER
GND_POWER
DVI INTERFACE
58
VA912/b-3
CN2
1 2 3 4 5 6 7 8
V5
GND_INV
R198
V33C
R199
C162
Q19
R200
INV_ON/OFF
2
GND_POWER
V33C
R195
R196
V33C
3
C30
Q18
R197
INV_ADJ
2
GND_POWER
INVERTER I/F
59
VA912/b-3
GND_POWER
VCPU
C171
R218
R22
C172
SDA
03/08/04
R139
R140
R219
SCL
ZDP7
C43
C41
C40
R23
CSZ HWRESET
C42
U3
Y2
R24
GND_POWER
VDD3
VDD
11
D18
X2
1
R25
C45
12
GND_POWER
X1
7
R26 R27
RST
HSCL/P3.0/RX HSDA/P3.1/TX P3.2/INT0 ISDA/P3.4/T0 ISCL/P3.5/T1
VBLANK/P4.0 HBLANK/P4.1 STOUT/P4.2
HSYNC VSYNC DA7/HCLAMP HLFHO/DA8 HALFV/DA9
P1.0 P1.1 P1.2 P1.3 P1.4 P1.5 P1.6 P1.7
17 18 20 21 22 23 24 25
C44
AD0 AD1 AD2 AD3

R28 R29
GND_POWER
VCPU 2
D19
1 2
3 Q1
VGA_5V
GND_POWER DDC_CLK DDC_DAT INT
SDA1 SCL1
C46
C47
29 28 19 13 14
V5A
LED
36 37 15
43 44 35 39 38
DA0/P5.0 DA1/P5.1 DA2/P5.2 DA3/P5.3 DA4/P5.4 DA5/P5.5 DA6/P5.6

AD0/P6.0 AD1/P6.1 AD2/P6.2/HLFHI AD3/P6.3 DA10/P6.4 DA11/P6.5 DA12/P6.6 DA13/P6.7
3 2 1 42 41 40 34
27 26 16 9 30 31 32 33
5V_ON/OFF
V5A
V5A
R32
R30
R31
V5A
R33
Q2
R34
GND_POWER
R36
1
2
5V_ON/OFF
R35
GND_POWER
R37
GND_POWER
Q3
MTV312M
10
Avoid entering the self-test mode of the MCU.
NC NC
VSS
5 6
GND_POWER
V5A
GND_POWER
2
L8
GND_POWER
1
R42
OPTION1 OPTION2 INV_ON/OFF
AUDIO_ON R193
XAO
VCM_PWM
V5A
LED
MENU KEY_DOWN KEY_UP SOURCE_SELECT AUTO_ADJ PWR_SW LED_GR LED_OR
GND_POWER
10/20
V5A
R43
R45
V5A
R44
U4
R46
8
7
DCDC_ON/OFF
Q6
VCC
WP
SCL
SDA
A0
1
C48
V5A
C49
R50
A1
R49
1
2
SCL1
SDA1
R51
R47
R48
6
5
A2
GND
3
4
GND_POWER
R52
Q7
C50
PANEL_ON/OFF (PANEL POWER CONTROL)

VCPU
CN8
GND_POWER
GND_POWER
DDC_DAT DDC_CLK
1 2 3 4
GND_POWER
MCU
60
VA912/b-3
V5A
V5A
5 6 7 8
5 6 7 8
R53
RP46
RP47
R54
4 3 2 1
4 3 2 1
CN3
LP11
MENU KEY_DOWN KEY_UP SOURCE_SELECT AUTO_ADJ
LED_G LED_O
PWR_SW AUDIO_ON VOL1 OPTION1 OPTION2

V5A
5 6 7 8 5 LP9 6 7 8 5 6 7 8 LP10
4 3 2 1 4 3 2 1 4 3 2 1
R179
CP33
CP34
22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
AUD_R
Q14
5 6 7 8
5 6 7 8
Q15
4 3 2 1
4 3 2 1
AUD_L
R181
LED_OR
1
2
LED_O
GND_POWER
V5A
R214
R215
R182
AUD_L
R216
AUD_R1
Q16
Q17
L20
L22
L21
R217
1
1
AUD_L1
L24
LED_GR
R184
L23
LED_G
J1
AUD_G1
1
C167
C168
C169
C170
AUD_R
GND_AUD
GND_AUD
GND_AUD
OSD INTERFACE
61
VA912/b-3
V33B
L9
(3-STEP)
VSD
XAO OE CKV
CN4
V33P
XAO OE CKV
STV VGD
PANEL_VGL
VGH_P
C51
2
R55
3 Q8
PANEL_VGH
STV
GND_POWER
L10
PANEL_VGH
VGD
VGD
R57
R56
R58
VCOM
C52
GVON
GND_POWER
GVON
GND_POWER
OSTH
OSTH
Q9
ZD1
A_G
B_D
A_S
L11
OB2P OB2N OB1P OB1N OB0P OB0N
OB2P OB2N OB1P OB1N OB0P OB0N

POL STB
VGH
VGH
VGH_P
GND_POWER
POL STB
OCLKN OCLKP
C53
C54
GVOFF
GVOFF
OCLKN OCLKP
R59
GND_POWER
GND_POWER
L12
OG2P OG2N OG1P OG1N OG0P OG0N

OR2P OR2N OR1P OR1N OR0P OR0N

VGL
VGL
C55
PANEL_VGL
C56
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
VSD1
VSD
VSA1
VSA
VCOM1
B_G
A_D
B_S
VCOM
VGD1
VGD
P_VGH1
PANEL_VGH
P_VGL1
PANEL_VGL 1
STB1
STB
POL1
GND_POWER
GND_POWER
POL
ESTH1
ESTH
L13
VCM
VCM
C57
C60
C61
VCOM
CN5
OSTH1
OSTH
C58
C59
VSD
VCOM ESTH EB2P EB2N EB1P EB1N EB0P EB0N
GND_POWER
L14
VAA
VAA
C63
C62
VSA
ESTH EB2P EB2N EB1P EB1N EB0P EB0N
C64
ECLKN ECLKP
GMA1 GMA2 GMA3 GMA4 GMA5 GMA6 GMA7
ECLKN ECLKP
GND_POWER

VSA

EG2P EG2N EG1P EG1N EG0P EG0N
ER2P ER2N ER1P ER1N ER0P ER0N
U5
NC
VSS

GND_POWER
VDD
5 CD
OUT
2
1
1
V33B R60
2
XAO XAO
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
STV1
STV
CKV1
CKV
OE1
OE
GVON1
GVON
GVOFF1
GVOFF
GND_POWER
PANEL I/F
62
VA912/b-3
VPREF1
VPREF
R61
VS1
R64
GMA1
1
GMA1
V5A
V33A1
TP
R65
GMA1
V33A
L15
U6
GMA2
R67
GMA2
C70
GND
VS2
R66
V5A
Vin
Vout
V33A
(PANEL VCC)
GMA2
1
C71
C72
C73
VS3
R70
GMA3
1
GMA3
R71
R72
GMA3
GND_POWER
VS4
GMA4
1
V33C1
TP
L16
GMA4
U8
R73
GMA4
3
R74
VS5
1
GMA5
GND
VIN
GMA5
VOUT VOUT
2 4
V33C
V33C
(SCALER VCC)
C80
R201
R202
GMA5
C78
C79
C81
VS6
1
GMA6
GMA6
R203
GMA6
GND_POWER
R204
VS7
1
R75
GMA7
GMA7
GMA7
V18V1
R76
R79
PP11
PP12
VPREF
1
R80
VCN
L17
D20
1
D21
2
U10
TP
R81
VCN1
GND
VIN
VOUT VOUT
2 4
V18C
V18C
(SCALER Core VCC)

C93
C94
C91
C92
GND_POWER
R82
VS8
R83
GMA8
1
GMA8
GMA8
R86
VS9
R87
R88
GMA9
1
GMA9
GND_POWER
GMA9
VS10
1
GMA10
GMA10
GMA10
R89
R90
VS11
1
R91
GMA11
GMA11
GMA11
V33A
(Panel VCC)
2
3 Q10
V33P
R92
VS12
1
GMA12
GMA12
GMA12
R97
R93
R96
C100
R205
C103
VS13
1
GMA13
GMA13
GMA13
C104
R98
QP19
C105
C106
R207
VS14
R208
GMA14
1
GMA14
GMA14
R206
PANEL_ON/OFF
GND_POWER
GND_POWER
VCM1
VOP1
1
V5A
U13
U12
C107
VOP
L18
GND
R99
8
GND
9.99V
VOUT VOUT 2 4
VIN
VOUT VOUT
2 4
R101
C109
VPREF
VCM
R102
R103
VOP
R100
8
U14B
GND_POWER
VCM
R104
1
VSCM
R106
3
2
VAA
VAA
VOP
VIN
VPREF
+ -
U14A
1
C108
VSCN
5
6
+ -
VSCM_ADJ
R107
R105
VSCN_OUT
C113
C114
VCN
C111
R108
GND_POWER
C115
C110
C112
GND_POWER
Q11
GND_POWER
GND_POWER
VCM_PWM
VCM_PWM 1
GND_POWER
GND_POWER
GND_POWER
GND_POWER
GND_POWER
POWER
63
VA912/b-3
VAD
VPLLVDVI
VDPLL
VPO
VDD
11 21 84 94 104 114 126 VDDP VDDP VDDP VDDP VDDP VDDP VDDP
55 65
U1
AVDD AVDD
AVDD_DVI AVDD_DVI
53
AVDD_MPLL
AVDD_PLL
VDDC VDDC VDDC VDDC
18 87 97 117
45 51
35
63 62 60 59 61 58 57 37 38
RIN0 RIN0M GIN0 GIN0M SOGIN0 BIN0 BIN0M HSYNC0 VSYNC0
NC NC RA1P RA1N RA2P RA2N RA3P RA3N

GA1P GA1N GA2P GA2N GA3P GA3N
106 107 108 109 110 111 112 113

98 99 100 101 102 103
88 89 90 91 92 93 118 119
V33C
VAD
R+ RG+ GB+ BCLK+ CLKVDVI
R+ RG+ GB+ BCLK+ CLKR1

C6
40 41 43 44 46 47 49 50 52
66
L1
C3
C1
C2
R+ RG+ GB+ BCK+ CKREXT

REFP
REFM
BA1P BA1N BA2P BA2N BA3P BA3N CLKAP CLKAN
OB2P OB2N OB1P OB1N OB0P OB0N OCLKP OCLKN
OB2P OB2N OB1P OB1N OB0P OB0N OCLKP OCLKN
GND_POWER
C11
67
RB1P RB1N RB2P RB2N RB3P RB3N

NC GB1P GB1N GB2P GB2N GB3P GB3N NC NC BB1P BB1N BB2P BB2N BB3P BB3N CLKBP CLKBN
ESP OSP
16 17 22 23 24 25
7 8 9 12 13 14 15 122 123 124 125 128 1 4 5 120 121
75 76
V33C
VPLL
L2
C4
C5
CSZ 69 SCL 71 SDA 70 HWRESET 32 INT 72 AD0 30 AD3 31 AD1 77 AD2 78
ALE/CSZ RDZ/SCL WRZ/SDA HWRESETZ INT AD0/GPO6 AD3/GPO5 AD1/EINV AD2/OINV
GND_POWER
INV_ADJ
73 74
C22
PWM0 PWM1
XIN
EB2P EB2N EB1P EB1N EB0P EB0N ECLKP ECLKN

ESTH OSTH
EB2P EB2N EB1P EB1N EB0P EB0N ECLKP ECLKN
V33C
L3
VDVI
D1
C7
C8
C9
C10
33
Y1
C23
ESTH OSTH
R185
POL
34
C24
XOUT
GND_POWER
3 2
6
R2
AVSS AVSS AVSS AVSS_MPLL
BYPASS AVSS_LPLL
BUSTYPE
AVSS_PLL
AVSS_DVI AVSS_DVI AVSS_DVI
GPO0 GPO1 GPO2 GPO3 GPO4 DDC1_DAT/GPO7 DDC1_CLK/GPO8
83 82 81 80 79 28 29
GVON1 STB STV CKV OE POL1 GVOFF
R186
GND_POWER
GVON
STB STV CKV OE

GVOFF
R187
R188
GVON
POL
V33C
L4
GND_POWER
R3
GNDP GNDP GNDP GNDP GNDP GNDP GNDP
GNDC GNDC GNDC GNDC
VDPLL
39 42 48
56 64 68 36
10 20 85 95 105 115 127
19 86 96 116
54
V5A
VOL_ADJ1
V33C
C12
C13
1
R209
V5A
3
Q20
R138
GND_POWER
GND_POWER
VOL1
V5A
C164
1
2
GND_POWER
R210
R212
VOL1
+ C165
R211
C166
V33C
L5
VPO
V33C
C14
C15
C16
C17
C18
C19
C20
C21
GND_POWER
GND_POWER
V18C
L6
VDD
V18C
C25
C26
C27
C28
C29
GND_POWER
Model Title Date
SCALER
Rev:
64
VA912/b-3
R109
11
DDC_DAT
12
13
14
15
CN7
1 6 2 7 3 8 4 9 5 10
R110
R111
R113
R115
C116
RIN
GIN
R112
C117
R114
C119
C118
BIN
SOG
R116
R117
R118 C120
R119
C121
C122
R120
C123
GND_POWER
R121
R123
GNDR
C124
GNDG
C125
D22
D23
1
D24
1
D25
1
D26
R122
GNDB
12/15/2003
DDC_CLK
V5A_ESD
GND_POWER
V5A_ESD
C159
GND_POWER
C157
C158
GND_POWER
Most of Customers Recommended.

R125
R124
D32
R126
HSYNC
C126
GND_POWER
GND_POWER
GND_POWER
R128
VSI
R127
D33
VSYNC
R129
C127
HSYNC1
TP
HSYNC
GND_POWER
VSYNC1
TP
VSYNC
CLK_DDC
R130
GND_POWER
GND_POWER
DDC_CLK
R131
VGA_5V
DAT_DDC
VGA_5V
DDC_DAT
(0603/100)
D27
V5A
L19
D28
D29
R133
V5A
C128
03/08/04
C129
D30
VGA_5V 03/08/04
R134
D31
R135
12/15/2003
U15
R136
GND_POWER
R137
1 2 3 4
GND_POWER
NC NC NC GND
VCC VCLK SCL SDA
8 7 6 5
3
VGA_5V
GND_POWER
GND_POWER
VGA
65
VA912/b-3
11.
PCB Layout Diagrams
66
VA912/b-3
* Reader Response* s
Dear Readers: Thank you in advance for your feedback on our Service Manual, which allows continuous improvement of our products. We would appreciate your completion of the Assessment Matrix below, for return to ViewSonic Corporation. Assessment A. What do you think about the content of this Service Manual?
Unit 1. Precautions and Safety Notices 2. Specification 3. Front Panel Function Control Description 4. Circuit Description 5. Adjustment Procedure 6. Troubleshooting Flow Chart 7. Recommended Spare Parts List 8. Exploded Diagram and Exploded Parts List 9. Block Diagrams 10. Schematic Diagrams 11.PCB Layout Diagrams Excellent Good Fair Bad
B.
Are you satisfied with this Service Manual?

Item Excellent Good Fair Bad
1. Service Manual Content 2. Service Manual Layout 3. The form and listing C. Do you have any other opinions or suggestions regarding this service manual? Reader basic dada: s Name: Company: Add: Tel: E- mail: Fax: Title:
After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile 1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes ([email protected])
67
VA912/b-3

VA 912B Service Manual

Uploaded by

Copyright:

Available Formats

VA 912B Service Manual

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

VA 912B Service Manual

Uploaded by

Copyright:

Available Formats

What are the main sections covered in the service manual?

What are the main sections covered in the service manual?

What safety precautions should be followed when working with the display?

What safety precautions should be followed when working with the display?

Service Manual

( VA912/b- 3_SM Rev. 1a Oct. 2005)

Confidential-Do Not Copy VA912/b-3

Confidential-Do Not Copy VA912/b-3

1. Precautions and Safety Notices

Confidential-Do Not Copy

Take out the monitor with cushion

Confidential-Do Not Copy

Confidential-Do Not Copy

Confidential-Do Not Copy

Power Supply Cold Start

TFT LCD PANEL

Confidential-Do Not Copy

Minimum: 110 Response Time 10% -90% @ Ta=25C Panel Defects

Confidential-Do Not Copy

3. Front Panel Function Control Description

Adjusting the Screen Image

Main Menu with OSD controls

Front Control Panel shown below in detail

Audio Mute button turns the sound off

Power light Green = ON Orange = Power Saving

Standby Power On/Off

Confidential - Do Not Copy

4. To adjust the setting, press the up

Confidential-Do Not Copy

Main Menu Controls

Confidential - Do Not Copy

Manual Image Adjust Sub-menu

Confidential-Do Not Copy

Confidential - Do Not Copy

Confidential-Do Not Copy

Confidential - Do Not Copy

Confidential-Do Not Copy

5. Adjusting Procedure A. Function Test and Alignment Procedure

5.5 Window Shut Down Test Signal: 1280*1024@60Hz Test Pattern:

5.6 Window BG Test Signal: 1280*1024@60Hz Test Pattern:

5.7 25 Gray Test Signal: 1280*1024@60Hz Test Pattern:

5.8 50 Gray Test Signal: 1280*1024@60Hz Test Pattern:

5.9 White Box Test Signal: 1280*1024@60Hz Test Pattern:

5.10 Black Box Test Signal: 1280*1024@60Hz Test Pattern:

Confidential-Do Not Copy

5.11 RED Test Signal: 1280*1024@60Hz Test Pattern:

5.12 Green Test Signal: 1280*1024@60Hz Test Pattern:

5.13 Blue Test Signal: 1280*1024@60Hz Test Pattern:

5.14 Gray_Scale_0-100_V256 Test Signal: 1280*1024@60Hz Test Pattern:

Confidential-Do Not Copy

5.15 Gray_Scale_0-100_H256 Test Signal: 1280*1024@60Hz Test Pattern:

Inspection Item: Cross Talk & Optical Character

Inspection Item: Function Defect & Image Remain

Confidential-Do Not Copy

5-18. Function Test Display pattern

Description Vertical 64 (256) Gray Scale (kA From 0 to

Confidential-Do Not Copy

Confidential-Do Not Copy

B. BIOS update procedure

b) Ancillary .ISPACK.EXE GDescription program