Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    Ldrxxyy: Very Low Drop Dual Voltage Regulator

    Uploaded by

    Caterine Oliveira
    LDRxxyy is a Very Low Drop Dual Voltage Regulator available in PPAK for the version without inhibit and in SPAK-7L for the version with the shutdown feature. The very low drop-voltage and the VERY LOW SUPPLY CURRENT make it particularly suitable for low noise and low power applications. For each VO a Shutdown Logic Control function is available (TTL compatible) to decrease the total power consumption.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Ldrxxyy: Very Low Drop Dual Voltage Regulator

    Uploaded by

    Caterine Oliveira
    54 views14 pages
    LDRxxyy is a Very Low Drop Dual Voltage Regulator available in PPAK for the version without inhibit and in SPAK-7L for the version with the shutdown feature. The very low drop-voltage and the VERY LOW SUPPLY CURRENT make it particularly suitable for low noise and low power applications. For each VO a Shutdown Logic Control function is available (TTL compatible) to decrease the total power consumption.

    Original Title

    64248_DS

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    LDRxxyy is a Very Low Drop Dual Voltage Regulator available in PPAK for the version without inhibit and in SPAK-7L for the version with the shutdown feature. The very low drop-voltage and the VERY LOW SUPPLY CURRENT make it particularly suitable for low noise and low power applications. For each VO a Shutdown Logic Control function is available (TTL compatible) to decrease the total power consumption.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    54 views14 pages

    Ldrxxyy: Very Low Drop Dual Voltage Regulator

    Uploaded by

    Caterine Oliveira
    LDRxxyy is a Very Low Drop Dual Voltage Regulator available in PPAK for the version without inhibit and in SPAK-7L for the version with the shutdown feature. The very low drop-voltage and the VERY LOW SUPPLY CURRENT make it particularly suitable for low noise and low power applications. For each VO a Shutdown Logic Control function is available (TTL compatible) to decrease the total power consumption.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 14

    LDRxxyy

    VERY LOW DROP DUAL VOLTAGE REGULATOR


    s s s

    s s

    s s

    OUTPUT CURRENT 1 UP TO 500mA OUTPUT CURRENT 2 UP TO 1.0A LOW DROPOUT VOLTAGE 1 (0.3V @ IO =500mA) LOW DROPOUT VOLTAGE 2 (0.4V @ IO =1A) VERY LOW SUPPLY CURRENT (TYP.50A IN OFF MODE, 1.6mA MAX IN ON MODE) LOGIC-CONTROLLED ELECTRONIC SHUTDOWN OUTPUT VOLTAGE AVAILABILITY FOR EACH REGULATOR: 1.8V, 2.5V, 3.3V INTERNAL CURRENT AND THERMAL LIMIT STABLE WITH LOW VALUE (MIN 4.7F) AND LOW E.S.R. OUTPUT CAPACITORS SUPPLY VOLTAGE REJECTION: 70dB (TYP.) TEMPERATURE RANGE (-40C TO 125C)

    SPAK-7L

    PPAK

    DESCRIPTION The LDRxxyy is a Very Low Drop Dual Voltage Regulator available in PPAK for the version without inhibit and in SPAK-7L for the version with the shutdown feature. The very low drop-voltage Figure 1: Block Diagram
    VI1
    POWER 1

    (0.5V) and the very low supply current make it particularly suitable for low noise and low power applications such as PDA, MICRODRIVE and other data storage applications while the used high voltage technology makes this device suitable for consumer applications such as MONITORS AND SET-TOP-BOX. For each VO a Shutdown Logic Control function is available (TTL compatible) to decrease the total power consumption.

    VO1

    INH1

    START UP 1

    BAND GAP 1

    DRIVER 1

    + ERROR AMPLIFIER 1

    THERMAL 1

    THERMAL 2

    + ERROR AMPLIFIER 2

    INH2

    START UP 2

    BAND GAP 2

    DRIVER 2

    VI2

    POWER 2

    VO2

    August 2004

    Rev. 2

    1/13

    LDRxxyy
    Table 1: Absolute Maximum Ratings
    Symbol VI1 & VI2 INH IO PTOT TSTG TA DC Input Voltage Shutdown Voltage Output Current Power Dissipation Storage Temperature Range Operating Ambient Temperature Range Parameter Value -0.3 to 15 -0.3 to 15 Internally Limited Internally Limited -50 to +150 -40 to +125 C C Unit V V

    Absolute Maximum Rating are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied.

    Table 2: Thermal Data


    Symbol RTHJ-C Parameter Junction to case thermal resistance PPAK 8 SPAK-7L 2 Unit C/W

    Figure 2: Connection Diagram (top view)

    PPAK

    SPAK-7L

    Table 3: Pin Description


    Symbol GND VI1 VI2 VINH1 VINH2 VO1 VO2 N.C. 4 5 Pin N for PPAK 3 2 1 Pin N for SPAK-7L 4 2 1 3 5 6 7 Name and Function Ground pin Input 1 Supply Pin. Bypass with a 2.2F capacitor to GND Input 2 Supply Pin. Bypass with a 2.2F capacitor to GND Enable 1 Pin. Internally connected to VI1 in the PPAK version Enable 2 Pin. Internally connected to VI2 in the PPAK version Output 1 Pin. Bypass with a 4.7F capacitor to GND Port Output 2 Pin. Bypass with a 4.7F capacitor to GND Port Not Internally Connected

    Table 4: Order Codes


    VO1 1.8 V 1.8 V 2.5 V 2.5 V 3.3 V 3.3 V 2/13 VO2 2.5 V 3.3 V 1.8 V 3.3 V 1.8 V 2.5 V PART NUMBERS TYPE SPAK-7L LDR1825 LDR1833 LDR2518 LDR2533 LDR3318 LDR3325 LDR1825K7-R LDR1833K7-R LDR2518K7-R LDR2533K7-R LDR3318K7-R LDR3325K7-R PPAK LDR1825PT-R LDR1833PT-R LDR2518PT-R LDR2533PT-R LDR3318PT-R LDR3325PT-R

    LDRxxyy
    Table 5: Electrical Characteristics (VI1 = VO1+2V, VI2 = VO2+2V, VINH1 = VINH2 = 2.5V, CI1,2 = 2.2F, CO1,2 = 4.7F, IO1 = IO2 = 10mA, TA = -40C to 125C, unless otherwise specified. Typical values are referred at TA = 25C)
    Symbol VO1 VO2 Parameter Output Voltage 1 Output Voltage 2 IO1 = 500mA IO2 = 1A VI1 = VO1+2V to VO1+7V, IO = 250mA VI2 = VO2+2V to VO2+7V, IO = 500mA VI1 = VO1+2V, IO1 = 10 to 500mA VI2 = VO2+2V, IO2 = 10mA to 1A IO1 = IO2 = NO LOAD NO LOAD IO1 = 500mA, IO2 = 1A TA = 25 TA = 25 500 1 2.4 0.8 VINH = 5V
    (2)

    Test Conditions

    Min. -5 -5

    Typ. VNOM1 VNOM2 0.3 0.4 15 15 10 60 2 1 30 800 1.6

    Max. +5 +5 0.7 0.8 30 40

    Unit %V %V V V mV mV mV mV mA mA mA mA A V V A dB %VO

    VDROP1 Dropout Voltage 1 (1) VDROP2 Dropout Voltage 2 (1) VO1 Line Regulation 1 VO2 VO1 VO2 ISTOT IS IQMAX ISC1 ISC2 VINH-H VINH-L IINH SVR eN Line Regulation 2 Load Regulation 1 Load Regulation 2 Total Supply Current 1 Channel Supply Current Quiescent Current Short Circuit Current 1 Short Circuit Current 2 Enable Voltage HIGH Enable Voltage LOW Enable Pin Current Supply Voltage Rejection RMS Output Noise (2)

    6 70 0.003

    VI1,2 = VO1,2 +3V 1V, IO1,2 = 10 mA, f = 120Hz Bandwidth of 10Hz to 100KHz

    (1): This test is not performed for VO<2.5V. (2): Guaranteed by design, but not tested in production.

    Figure 3: Typical Application Circuit

    3/13

    LDRxxyy
    TYPICAL CHARACTERISTICS (unless otherwise specified Tj = 25C) Figure 4: Dropout Voltage (VO1) vs Temperature Figure 7: Output Voltage (VO2) vs Temperature

    Figure 5: Dropout Voltage (VO2) vs Temperature

    Figure 8: Line Regulation (VO1) vs Temperature

    Figure 6: Output Voltage (VO1) vs Temperature

    Figure 9: Load Regulation (VO1) vs Temperature

    4/13

    LDRxxyy
    Figure 10: Line Regulation (VO2) vs Temperature Figure 13: Short Circuit Current (VO2) vs Drop Voltage

    Figure 11: Load Regulation (VO2) vs Temperature

    Figure 14: Inhibit Voltage vs Temperature

    Figure 12: Short Circuit Current (VO1) vs Drop Voltage

    Figure 15: One Channel Inhibit Current vs Temperature

    5/13

    LDRxxyy
    Figure 16: Supply Voltage Rejection vs (VO1) Temperature Figure 19: Supply Voltage Rejection (VO2) vs Frequency

    Figure 17: Supply Voltage Rejection vs (VO2) Temperature

    Figure 20: Maximum Total Quiescent Current vs Temperature

    Figure 18: Supply Voltage Rejection (VO1) vs Frequency

    Figure 21: Total Supply Current vs Temperature

    6/13

    LDRxxyy
    Figure 22: Quiescent Current (VO1) vs Output Current Figure 25: Load Transient

    CI1,2=1F, CO1,2=2.2F, VINH1,2 =2.5V, VI1=4.5V, VI2=5.3V, IO1=5mA to 0.5A, IO2=5mA to 1A, tRISE=tFALL=4.2s

    Figure 23: Quiescent Current (VO2) vs Output Current

    Figure 26: Line Transient VO1,2

    CI1,2=0, CO1,2=2.2F, VI1=4.4 to 10.4V, VI2=5.3 to 11.3V, IO1=0.25A, IO2 =0.5A, tRISE=tFALL =4.4s

    Figure 24: Thermal Protection vs VO1

    Figure 27: Start up Transient VO1

    VI1=1.1 to 8.5V, VI2=1.2 to 9.8V, IO1=0.25A, IO2=0.5A, t RISE=5s

    7/13

    LDRxxyy

    PPAK MECHANICAL DATA


    mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 e G G1 H L2 L4 L5 L6 0.6 1 2.8 4.9 2.38 9.35 0.8 6.4 4.7 1.27 5.25 2.7 10.1 1 1 0.023 0.039 0.110 0.193 0.093 0.368 0.031 2.2 0.9 0.03 0.4 5.2 0.45 0.48 6 5.1 6.6 0.252 0.185 0.050 0.206 0.106 0.397 0.039 0.039 TYP MAX. 2.4 1.1 0.23 0.6 5.4 0.6 0.6 6.2 MIN. 0.086 0.035 0.001 0.015 0.204 0.017 0.019 0.236 0.201 0.260 TYP. MAX. 0.094 0.043 0.009 0.023 0.212 0.023 0.023 0.244 inch

    0078180-E

    8/13

    LDRxxyy

    SPAK-7L MECHANICAL DATA


    DIM. A A2 C C1 D D1 F G G1 H1 H2 H3 L L1 L2 M N V 3 8.89 0.79 0.25 6 3 9.27 8.89 10.41 7.49 9.14 1.04 0.350 0.031 0.010 6 1.02 7.87 0.63 1.27 7.62 5.59 9.52 9.14 10.67 0.365 0.350 0.410 0.295 0.360 0.041 mm. MIN. 1.78 0.03 0.25 0.25 1.27 8.13 0.79 0.040 0.310 0.025 0.050 0.3 0.220 0.375 0.360 0.420 TYP MAX. 2.03 0.13 MIN. 0.070 0.001 0.010 0.010 0.050 0.320 0.031 inch TYP. MAX. 0.080 0.005

    PO13F2/A
    9/13

    LDRxxyy

    Tape & Reel SPAK-xL MECHANICAL DATA


    mm. DIM. MIN. A C D N T Ao Bo Ko Po P 9.70 10.85 2.30 3.9 11.9 9.80 10.95 2.40 4.0 12.0 12.8 20.2 60 14.4 9.90 11.05 2.50 4.1 12.1 0.382 0.423 0.090 0.153 0.468 0.386 0.427 0.094 0.157 0.472 13.0 TYP MAX. 180 13.2 0.504 0.795 2.362 0.567 0.390 0.431 0.098 0.161 0.476 0.512 MIN. TYP. MAX. 7.086 0.519 inch

    10/13

    LDRxxyy

    Tape & Reel DPAK-PPAK MECHANICAL DATA


    mm. DIM. MIN. A C D N T Ao Bo Ko Po P 6.80 10.40 2.55 3.9 7.9 6.90 10.50 2.65 4.0 8.0 12.8 20.2 60 22.4 7.00 10.60 2.75 4.1 8.1 0.268 0.409 0.100 0.153 0.311 0.272 0.413 0.104 0.157 0.315 13.0 TYP MAX. 330 13.2 0.504 0.795 2.362 0.882 0.2.76 0.417 0.105 0.161 0.319 0.512 MIN. TYP. MAX. 12.992 0.519 inch

    11/13

    LDRxxyy
    Table 6: Revision History
    Date 03-Aug-2004 Revision 2 Description of Changes Typing correction on tables 1, 3, 5 and figures 3, 6, 10, 11, 14, 17, 22, 23.

    12/13

    LDRxxyy

    Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners 2004 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com

    13/13

    This datasheet has been downloaded from: www.DatasheetCatalog.com Datasheets for electronic components.

    You might also like