CTG Series transfer switches are pre-configured for applications requiring the dependability and ease of operation found in a full feature power contactor type transfer switch. CTG switches are equipped with the next generation MX150 microprocessor panel, which controls the operation and displays the status of the transfer switch's position, timers and available sources. As an embedded digital controller, the MX150 offers high Radiated RF, of unattended operation across reliability and ease electromagnetic field immunity a range of applications.
CTG Series transfer switches are pre-configured for applications requiring the dependability and ease of operation found in a full feature power contactor type transfer switch. CTG switches are equipped with the next generation MX150 microprocessor panel, which controls the operation and displays the status of the transfer switch's position, timers and available sources. As an embedded digital controller, the MX150 offers high Radiated RF, of unattended operation across reliability and ease electromagnetic field immunity a range of applications.
CTG Series transfer switches are pre-configured for applications requiring the dependability and ease of operation found in a full feature power contactor type transfer switch. CTG switches are equipped with the next generation MX150 microprocessor panel, which controls the operation and displays the status of the transfer switch's position, timers and available sources. As an embedded digital controller, the MX150 offers high Radiated RF, of unattended operation across reliability and ease electromagnetic field immunity a range of applications.
CTG Series transfer switches are pre-configured for applications requiring the dependability and ease of operation found in a full feature power contactor type transfer switch. CTG switches are equipped with the next generation MX150 microprocessor panel, which controls the operation and displays the status of the transfer switch's position, timers and available sources. As an embedded digital controller, the MX150 offers high Radiated RF, of unattended operation across reliability and ease electromagnetic field immunity a range of applications.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 6
AUTOMATIC TRANSFER SWITCH
CTG SERIES AUTOMATIC TRANSFER SWITCH
The Cat CTG Series transfer switch is pre-configured for applications requiring the dependability and ease of operation found in a full feature power contactor type transfer switch. CTG switches are equipped with the next generation MX150 microprocessor panel, which controls the operation and displays the status of the transfer switchs position, timers and available sources. As an embedded digital controller, the MX150 offers high Radiated RF, of unattended operation across reliability and ease electromagnetic field immunity a range of applications.
FEATURES Ratings 40 to 3000 amps (2, 3 or 4 poles) UL 1008 listed at 480 VAC CSA certified at 600 VAC (200-225 amp 480 V) IEC listed at 480 V Double throw, mechanically interlocked contactor mechanism Electrically operated, mechanically held Designed for emergency and standby applications Available in standard open transition (CTG) or delayed transition (CTGD) models Ringing wave immunity per IEEE 472 (ANSI C37.90A) Conducted and Radiated Emissions per EN55022 Class B (CISPR 11) (Exceeds EN55011 & MILSTD 461 Class 3) ESD immunity test per EN61000-4-2 (Level 4) Radiated RF, electromagnetic field immunity test per EN61000-4-3 (ENV50140) 10v/m Electrical fast transient/burst immunity test per EN61000-4-4
Surge immunity test per EN61000-4-5 IEEE C62.41 (1.2 X 50 ms, 5 & 8 kV) Conducted immunity test per EN61000-4-6 (ENV50141) Voltage dips and interruption immunity EN61000-4-11 Seismic Compliance to IEEE-693-2005 and IBC-2003
DESIGN AND CONSTRUCTION FEATURES
Close differential 3 phase under-voltage sensing of the normal source factory standard setting 90% pickup, 80% dropout (adjustable);under frequency sensing of the normal source factory setting 95% pickup (adjustable) Voltage and frequency sensing of the emergency source factory standard setting 90% pickup voltage, 95% pickup frequency (adjustable) Test switch (fast test/load/no load) to simulate normal source failure automatically bypassed should the emergency source fail Type 1 enclosure is standard also available in open style or Types 3R, 4, 4X, or 12.
LEXX0523-08
AUTOMATIC TRANSFER SWITCH
STANDARD FEATURES AND OPTIONS STANDARD FEATURES Auxiliary Contact: Closed when the switch is in the emergency position(Additional contacts optional) Auxiliary Contact: Closed when the switch is in the normal position (Additional contacts optional) 7, 14, 28 day interval timed exerciser, pushbutton/timer operation Engine Start Contact Indicating LED Pilot Lights: Switch in emergency position Switch in normal position Normal source available Emergency source available Time Delay to Engine Start: Standard setting 3 seconds, adjustable 0-10 seconds In-Phase Monitor, self-adjusting (Not available on CTGD models) Time Delay on Retransfer to Normal: To delay retransfer to normal source (immediate retransfer on generator set failure); standard setting 30 minutes, adjustable 0-60 minutes Pushbutton Bypass of time delay and normal emergency Test Switch Momentary Event Log OD 16 Event that track date, time, reason and action taken Voltage and Frequency Indication for S1 and S2 Peak Shave/Remote Load Test: Input for peak shave or remote load test; includes automatic return to normal if emergency source fails and normal is present; 120 VAC When specified for use with a CTGD Series delayed transition switch, the control panel also includes the following: Time Delay from Neutral Switch Position to Normal on Retransfer: Standard setting 5 seconds, adjustable 0-10 minutes Time Delay from Neutral Switch Position to Emergency: Standard setting 5 seconds, adjustable 0-10 minutes Center-Off position/Off Delay Timing Indicators MX150 CONTROL PANEL Time Delay for Engine Cool Down: Allows engine to run unloaded after switch retransfer to normal; standard setting 5 minutes, adjustable 0-60 minutes Time Delay on Transfer to Emergency: To delay transfer to emergency after verifying emergency source available; standard setting 1 second, adjustable 0-5 minutes Timer and voltage/frequency settings adjustable without disconnection from power sources Built-in diagnostics with LCD display for immediate troubleshooting LED/LCD indicators for ease of viewing and long life Nonvolatile memory (exerciser battery backup not required for standard operation) Processor and digital circuitry isolated from line voltage Inputs optoisolated for high electrical immunity to transients and noise Communications header for network interface OPTIONAL ATTACHMENTS Plant Exerciser, clock type (load/no load): Allows the generator to start and run unloaded or to simulate a power failure, start generator and run under load (7-14-28-365 days, user selectable) Space heater and thermostat Network communications interface card (LonWorks/ModBus) Maintained Test Switch Maintained Test Switch w/Keypad Service entrance configuration Auxiliary Contact, operates on Source 1 line failure Auxiliary Contact, operates on Source 2 availability Auxiliary Contacts: Closed when the transfer switch is in Source 2 position Auxiliary Contacts: Closed when the transfer switch is in Source 1 position Disconnect Switch: Permits transfer in AUTO position and inhibits transfer in INHIBIT position. (Standard 800A and above) Elevator Pre-Signal Auxiliary Contacts: Open 0-60 seconds prior to transfer to either direction, re-closes after transfer Universal Motor Load Disconnect Circuit: Auxiliary Contact opens 0-60 seconds prior to transfer in either direction, re-closes after transfer. Can be configured by end user for Pre-transfer, Post-transfer, or both. Voltage Imbalance Monitor (Three Phase) Lockable, see-through cover for ATS controller
LEXX0523-08
AUTOMATIC TRANSFER SWITCH
OPTIONAL ATTACHMENTS (continued) POWER MEASUREMENT METERS M90 EPM 2000 Digital Power Meter with Display: Amps, Volts, and Frequency M91 EPM 6000 Digital Meter with Display of Amps, Watts, Volts, Frequency, plus THD capability with Ethernet
NOTE: For applications requiring additional options or other configurations, see the CTS Series fully configurable transfer switch.
DIMENSIONAL SPECIFICATIONS CTG & CTGD TRANSFER SWITCHES MODEL AMP RATING POLES HEIGHT (A) NEMA 1 ENCLOSED WIDTH DEPTH (B) (C) REFERENCE FIGURE WEIGHT APPLICATION NOTES
Application Notes : 1. Dimensions are listed in inches (mm) and weights in pounds (kg). 2. Includes 1.25" door projection beyond base depth. Allow a minimum of 3" additional depth for projection of handle, light, switches, pushbuttons, etc. 3. All dimensions and weights are approximate and subject to change without notice and are not for construction use. 4. Packing materials must be added to weights shown. Allow 15% additional weight for cartons, skids, crates, etc. 5. Special enclosures (NEMA 3R, 4, 4X, 12, etc.) dimensions may differ. Consult Caterpillar for details. 6. CTG 40-200 require larger 36" H X 24" W X 14" D enclosure depending on options specified. Consult Caterpillar for details. 7. Add 3" in height for lifting eyes. 8. Ventilation louvers on side/rear of 2600 and 3000A units require one side or rear of enclosure to be clear in order to afford proper airflow.
Figure A CTG Series Transfer Switch (40-400 amp)
Figure B CTG Series Transfer Switch (600-1200 amp)
Figure C CTG Series Transfer Switch (1600-3000 amp)
LEXX0523-08
AUTOMATIC TRANSFER SWITCH
TESTING STANDARDS UL, CSA and IEC listed Ringing wave immunity Conducted and Radiated Emissions ESD immunity test Class B Radiated RF, electromagnetic field immunity test Electrical fast, transient / burst immunity test Surge immunity test Conducted immunity test Voltage dips and interruption immunity UL 1008, CSA 22.2 No. 178, IEC 947-6-1 IEEE 472 (ANSI C37.90A) EN55022 Class B (CISPR 11) (Exceeds EN55011 & MILSTD 461 Class 3) EN61000-4-2 (Level 4) EN61000-4-3 (ENV50140) 10v/m EN61000-4-4 EN61000-4-5 IEEE C62.41 EN61000-4-6 (ENV50141) EN61000-4-11
AL/CU UL LISTED SOLDERLESS SCREW-TYPE TERMINALS FOR EXTERNAL POWER CONNECTIONS
Normal, Emergency and Load Terminals Cables per Pole Range of Wire Sizes 1 #8 to 3/0 AWG 1 1 2 4 8 #6 AWG to 250 MCM* #4 AWG to 600 MCM* #2 AWG to 600 MCM #2 AWG to 600 MCM #2 AWG to 600 MCM
Switch Size (Amps) 40, 80 100, 150, 200 & 225 260 & 400 600 800, 1000, 1200 1600, 2000, 2600, 3000 *or 2 1/0 - 250 MCM may be used
MX150 CONTROL SETTING RANGES
Control Function Normal Line Sensing- Under-voltage Emergency Line Sensing - Under-voltage Emergency Line Sensing - Under-frequency Time Delay - Engine Start Time Delay - Engine Cool Down Time Delay - Transfer to Emergency Time Delay - Retransfer to Normal Time Delay - Motor Disconnect or Transfer Presignal (When applicable) Delayed Transition Time Delays (When applicable) Dropout Pickup Dropout Pickup Dropout Pickup Range 75-98% 85-100% 75-98% 85-100% 2 Hz below pickup 90-100% 0-10 seconds 0-60 seconds 0-5 minutes 0-60 minutes 0-60 seconds 0-10 minutes Factory Setting 80% 90% 80% 90% Set 95% 3 seconds 5 minutes 1 second 30 minutes 20 seconds 5 seconds
LEXX0523-08
AUTOMATIC TRANSFER SWITCH
WITHSTAND CURRENT DATA Withstand Current Ratings per UL 1008 Maximum Circuit Amps Maximum Circuit Amps When Used With When Used With Specific Current CTGD Specific Coordinated Limiting Switch Coordinated Breaker Fuse Ratings Breaker Rating CTG/CTGD (Amps) Rating 30,000 35,000 50,000 65,000 85,000 100,000 200,000 40, 80, 100 150, 225, 260 400, 600 800 1000, 1200 1600, 2000, 2600, 3000 50,000 50,000 50,000 65,000 85,000 100,000
Information contained in this publication may be considered confidential. Discretion is recommended when distributing. Materials and specifications are subject to change without notice. CAT, CATERPILLAR, their respective logos, Caterpillar Yellow, the Power Edge trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. www.Cat-ElectricPower.com LEXX0523-08 LEXX0523-08 (06-10)
2010 Caterpillar All Rights Reserved. Printed in U.S.A.
