Scribd Logo
Upload

Welcome to Scribd!

  • 439 views

    Valve Seat Material Selection Guide

    Uploaded by

    murtuza5
    The document provides a guide for selecting valve seat materials based on their properties and applicable temperature and pressure ranges. It lists several common materials including various grades of PTFE, reinforced PTFE, PEEK, Delrin, UHMW-PE, and stainless powder PTFE. Each material is described briefly along with its suitable temperature range, color, common applications, and maximum suggested pressure under normal temperatures. PTFE and reinforced PTFE grades are best for general chemical applications, while PEEK and Delrin can withstand higher temperatures and pressures. UHMW-PE and stainless powder PTFE offer abrasion resistance.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Valve Seat Material Selection Guide

    Uploaded by

    murtuza5
    439 views1 page
    The document provides a guide for selecting valve seat materials based on their properties and applicable temperature and pressure ranges. It lists several common materials including various grades of PTFE, reinforced PTFE, PEEK, Delrin, UHMW-PE, and stainless powder PTFE. Each material is described briefly along with its suitable temperature range, color, common applications, and maximum suggested pressure under normal temperatures. PTFE and reinforced PTFE grades are best for general chemical applications, while PEEK and Delrin can withstand higher temperatures and pressures. UHMW-PE and stainless powder PTFE offer abrasion resistance.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a guide for selecting valve seat materials based on their properties and applicable temperature and pressure ranges. It lists several common materials including various grades of PTFE, reinforced PTFE, PEEK, Delrin, UHMW-PE, and stainless powder PTFE. Each material is described briefly along with its suitable temperature range, color, common applications, and maximum suggested pressure under normal temperatures. PTFE and reinforced PTFE grades are best for general chemical applications, while PEEK and Delrin can withstand higher temperatures and pressures. UHMW-PE and stainless powder PTFE offer abrasion resistance.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    439 views1 page

    Valve Seat Material Selection Guide

    Uploaded by

    murtuza5
    The document provides a guide for selecting valve seat materials based on their properties and applicable temperature and pressure ranges. It lists several common materials including various grades of PTFE, reinforced PTFE, PEEK, Delrin, UHMW-PE, and stainless powder PTFE. Each material is described briefly along with its suitable temperature range, color, common applications, and maximum suggested pressure under normal temperatures. PTFE and reinforced PTFE grades are best for general chemical applications, while PEEK and Delrin can withstand higher temperatures and pressures. UHMW-PE and stainless powder PTFE offer abrasion resistance.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Valve seat Material Selection Guide

    Seat Code Material Description Applicable Temp. Range Colour Service Application Suggested Pressure under normal Temp.
    70 bar 1000 psi

    PTFE

    Virgin Polytetrafluoethylene

    Virgin PTFE is the most common sealing material and is suitable for almost all media as it has excellent chemical resistance. 15% Glass Filled Reinforced PTFE chemical resistance is compatible to PTFE and improved cycle life and greater pressure temp. Rating. Second Generation PTFE offers better Creep, Lower coefficient of friction provides lower torque values and resist deformation. This is excellent application. Carbon Graphite Reinforced PTFE an excellent seat material for steam and thermal services and having good abrasion resistance. Due to its high cycling capabilities, it is the recommended soft seat for modulating control application. Glass and metal Oxide PTFE filled withstand pressure than CTFE. Good resistance under load and not recommended for food stuff. Poly Ether Ketone a material outstanding pressure capabilities at elevated temperature and has excellent chemical and abrasion resistance. Delrin is capable of handling extremely high pressure. Must not used for oxygen service. UHMW-PE is ideal for use in low level radiation service. This seat also meets the requirements of the tobacco industry where PTFE is prohibited and it offers an excellent resistance to abrasion medium. Stainless Powder combines the strength of metal with the lubricity of PTFE. 50% SS316 powder combines with 50% PTFE offers abrasion resistance of metal with higher pressure and temperature rating than RTFE

    -45oC~160oC (-49oF-320oF)

    White

    General Chemical

    RTFE

    15% Glass Filled Reinforced PTFE

    -45oC~180oC (-49oF-356oF)

    Off-White

    For low and medium pressure service for steam service upto 150 psig.

    140 bar 2000 psi

    TFM1600

    Modified PTFE (PFA & PTFE)

    -57oC~180oC (-70oF-356oF)

    White

    Ideal for application requiring higher purity such as semiconductor

    140 bar 2000 psi

    MS02 Filled PTFE CTFE MG1431

    -45oC~200oC (-49oF-392oF)

    Black

    For high temperature and high pressure service for steam services up to 450 psig

    140 bar 2000 psi

    MS02 MG1413

    MS02 Filled PTFE

    -45oC~180oC (-49oF-356oF)

    Grey

    For high Temperature and High pressure service for steam service up to 450 psi.

    140 bar 2000 psi

    PEEK

    Poly Ether Keton

    -45oC~260oC (-49oF-500oF)

    Grey

    Best suited for high temperature and pressure service up to 3000 psig.

    400 bar 5000 psi

    DELRIN

    Duponts Acetal Homopolymer (Delrin) Ultra High Molecular weight Polyethylene

    -40oC~80oC (-40oF-176oF)

    Creamy White

    Best suited for high pressure service up to 6000 psig.

    425 bar 6000 psi

    UHMW-PE

    -30oC~80oC (-22oF-176oF)

    White

    Best suited for tobacco duty and abrasion resistance.

    350 bar 5000 psi

    Stainless Powder PTFE SS/PTFE

    -28oC~220oC (-18oF-428oF)

    Grey

    Best suited for abrasion resistance and control steam application.

    150 bar 2130 psi

    You might also like