Technical Specification 6-9405-H 2007-05-07

Sandvik DT820-C

A P PL ICA TI ON
The Sandvik DT820-C is a two boom electro hydraulic jumbo for fast and accurate drilling in tunneling and cavern excavation of 12 110 m2 cross sections. The hydraulic controlled drilling system with added automatic functions and different optional instrumentation levels enable productive and high quality excavation. The HLX5 rock drills deliver superior performance with high consumable life. The TB 90 universal booms have a large optimum shaped coverage and full automatic parallelism. The booms can also be used for cross-cutting and bolt hole drilling. An optional basket boom for bolting and utility works is available. The powerful 4-wheel-drive center articulated carrier ensures rapid and safe tramming with good balance. The noise and vibration insulated safety cabin provides an ergonomic workplace with excellent visibility for both tramming and drilling.

M A I N S P EC IF IC A T IO N S
Carrier Safety cabin Rock drill Feed Boom Control system Powerpack Air compressor Shank lubricating device Water pump Main switch Cable reel 1 x TC 8 1 x FOPS (ISO 3449) 2 x HLX5 2 x TF 500-16 2 x TB 90 2 x THC 560 2 x HP 560 (55,0 kW) 1 x CT 10 1 x SLU 2 1 x WBP 2 1 x MSE 20 1 x TCR 3E

Length 14 900 mm Width Transportation 2 500 mm Tramming / Drilling 3 000 mm Height 3 600 mm Weight 26 850 kg Tramming speed Horizontal 16,0 km/h 14 % = 1:7 = 8 5,4 km/h Gradeability 28 % = 1:3,5 = 15 Noise level (EN 791, free field condition) In cabin LpA = 76 dB Emitted LwA = 125 dB

2007 Sandvik Mining and Construction

1/4

Technical Specification 6-9405-H 2007-05-07

Sandvik DT820-C

GENERAL DIMENSIONS

3 600

15 400 2 300 4 120

22

3 200

14 900 (with TF 50016 feed)

TC 8 CARR IER
Diesel engine Transmission Axles Brakes Service Parking and emergency Tyres Steering Articulation Rear oscillation Ground clearance Fuel tank Hydraulic jacks Front Rear Safety cabin MB OM904LA 110 kW (149 hp) Clark 20 000 Hydrodynamic Clark-Hurth Hydraulically operated wet disc brakes SAHR type, fail-safe wet disc brakes 14.00 24 PR 28 Frame steering, Orbitrol 37 8 400 mm 150 l 2 x TJ 60 2 x TJ 75 FOPS (ISO 3449) Pressurized

HLX5 ROCK DR ILL

Weight Length Profile height Power class Max working pressure Percussion Rotation Max torque 125 cm motor Hole size Recommended steel 210 kg 955 mm 87 mm 20 kW 225 bar 175 bar 625 Nm 43 64 mm T38-H35-R32 T38-H35-alpha 330 T38-R39-R35 7304-7585-01 (T38) 10 20 bar Cylinder wire rope 25 kN Hole Rod Machine length length length (mm) (mm) (mm) 3 440 4 050 4 660 5 270 5 880 3 700 4 305 4 915 5 525 6 135 14 680 14 900 14 900 15 350 16 400

Shank adapter Flushing water pressure

T F 5 00 F EE D
Feed type Feed force FEED TF 500 12 14 16 18 20 Total length (mm) 5 270 5 880 6 490 7 100 7 710

2007 Sandvik Mining and Construction

2/4

1 410

2 370

Technical Specification 6-9405-H 2007-05-07

Sandvik DT820-C

TURNING RADIUS

16 17 0 750 W

750 R2 37 R1

FEED TF 50012 TF 50014 TF 50016 TF 50018 TF 50020

W

R1 7 940 7 940 8 050 8 190 8 300

R2 4 655 4 655 4 655 4 655 4 655

W 4 730 4 730 4 840 4 980 5 090

TB 90 BOO M
Parallel coverage Boom extension Feed extension With TF-feed Boom weight, net Rotation angle Power control Rotation control Automatic functions 90 m 1 800 mm 1 650 mm 2 650 kg 358 Adjustable full power Adjustable collaring power Adjustable rotation speed Collaring Feed controlled percussion Anti-jamming Flushing Stop and return Fully proportional 1 x 55 kW 3-phase motor 1 x 150 l/min variable displacement axial piston pump 1 x 80 l/min variable displacement axial piston pump, max. flow restricted 50 l/min by rotation main valve 1 x 20 micron 1 x 10 micron

Oil tank volume Tank filling Oil cooling

Max. 235 l, min. 135 l 1 x manual pump 1 x OW 30 water cooler 1 x CT 10 1,0 m/min, 7 bar 1 x SLU 2 250 350 l/min / rock drill 180 250 g/h / rock drill 1 x WBP 2 100 l/min (15 bar) With 5 bar inlet pressure 2 7 bar (while drilling) 1 x WP 70

A IR C IRCUIT
Compressor type Capacity Shank lubricating device Air consumption Oil consumption

TH C 560 CON TROL SYSTEM

WAT ER C IRCU I T
Water pump type Capacity Inlet pressure Inlet pressure control valve

Boom controls

E L EC T R IC A L S Y ST EM
Total input power 135 kW Main switch 1 x MSE 20 Standard voltages 380 690 VAC Voltage fluctuation Max. 10 % Star Delta Starting (380 690 VAC only) Lighting Combined working and driving lights (24 VDC) 8 x 35 W (HID) front Working lights (24 VDC) 2 x 35 W (HID) rear Driving lights (24 VDC) 4 x 35 W (HID) rear Automatic cable reel 1 x TCR 3E

H P 560 POW ER PACK

Electric motor Pump types Percussion, feed and boom Rotation

Filtration Pressure Return

2007 Sandvik Mining and Construction

3/4

Technical Specification 6-9405-H 2007-05-07

Sandvik DT820-C

COVERAGE AREA

8 420

3 000 2 500 1 920

300

2 370

13 325 14 210

OPTIONAL EQUIPMENT
DRILLING SYSTEM
*) HLX5T rock drills *) Feed length 12, 14, 18 or 20 *) Telescopic feed TFX-series Rod retainer TRR1 for one feed TRS two-rod system for one boom (includes TRR1) Drill angle measuring instrument TMS D2 Drill angle and depth measuring instrument TMS DDSS2 Drill position and angle measuring instrument TCAD-DS Data logging unit TLOG for TCAD *) Double flushing with CT 16 compressor (11 kW) Air mist flushing kit for auxiliary water/air connection Flushing flow control Electric cable rubber or PUR Ground fault and overcurrent unit VYK *) 1 000 VAC electric system Extra working lights 2 x 35 W (24 VDC) HID Spotlight 70 W (24 VDC) for basket boom Cabin air conditioning (drilling and tramming) Cabin heating (drilling and tramming) 12 VAC electric outlet and CD-player / radio readiness CD-player / radio in cabin Exhaust scrubber Exhaust catalyzer Complete spare wheel *) Stainless steel cabin (FOPS only) *) Low mounted cabin (machine height 3 190 mm) Fire extinguisher (bottle only) Manual fire suppression system ANSUL, 6 nozzles Pressure cleaning system (15 bar) with reel High pressure cleaning system with reel and handset Automatic water hose reel THR 2.5E Water hose 1 " (65 m) *) Electric filling pump for hydraulic oil Greasing reel with pump and nozzle Automatic greasing system (Lincoln) Biodegradable oils Air cleaner IP 5 with connections Fast filling and evacuation system Wiggins for fuel Fast filling and evacuation system Wiggins for fuel, transmission, engine and hydraulic oil Basket boom TBB 3 (Note: Changes in weight, turning radius and ramp tramming speed) FOPS safety canopy for basket boom TBB 3 *) EU, UL, CSA, AUS norms package

OTHER OPTIONAL EQUIPMENT

ELECTRICAL SYSTEM

CARRIER

*) = Replaces standard component

Sandvik Mining and Construction reserves the right to change this specification without further notice. Sandvik Mining and Construction Oy P.O.Box 100, FIN33311 Tampere, Finland 2007 Sandvik Mining and Construction44 4771 Tel. +358 205 44 121, Telefax +358 205 www.sandvik.com

4/4