analytical hplc

SofGrip One-Piece High-Pressure Fittings

Soft elastomer cushion makes hand-tightening comfortable Graph-Tite construction is three times stronger than PEEK One-piece integrated ferrule eliminates handling small pieces No-Slip version stays on tubing between connections

best seller
Other Fittings No-Slip SofGrip
4615

hplc accessories | fittings

SofGrip One-Piece Fitting Specifications Material: Graph-Tite (Carbon-Reinforced PEEK) Max. Temperature: 100C Max. Pressure: 5000psig Thread Type: 10-32 UNF Typical Use: 1/16" o.d. Tubing Connections

4614

Integral barrel tines in No-Slip SofGrip fittings lightly grip tubing. This holds the fitting in place between connections.

6361

One-Piece High-Pressure Fittings

PEEK or Graph-Tite construction is inert and biocompatible One-piece integrated ferrule eliminates handling small pieces No-Slip version stays on tubing between connections
One-Piece Fitting Specifications Material: PEEK or Graph-Tite (Carbon-Reinforced PEEK) Max. Temperature: 100C Max. Pressure: Finger-Tight: 5000psig / Wrench-Tight: 8000psig Thread Type: 10-32 UNF Typical Use: 1/16" o.d. Tubing Connections
5425

A One-Piece High-Pressure Fittings

Graphic Length

B
Color

C
Material

D
Qty.

E
Standard Part No.

F
No-Slip Part No.

SofGrip One-Piece Fittings A Short A Short A Short A Short A Short B Long A Short One-Piece Fittings, Finger-Tight C Short C Short C Short C Short C Short C Short C Short D Long D Long One-Piece Fittings, Hex-Head E Short E Short F Long F Long

Black Red Blue Green Yellow Black Assort. Natural Red Yellow Blue Green Black Assort. Natural Black Natural Black Natural Black

Graph-Tite Graph-Tite Graph-Tite Graph-Tite Graph-Tite Graph-Tite Graph-Tite PEEK PEEK PEEK PEEK PEEK Graph-Tite PEEK PEEK Graph-Tite PEEK Graph-Tite PEEK Graph-Tite

10 10 10 10 10 10 10 10 10 10 10 10 10 12 10 10 10 10 10 10

40501 40502 40503 40504 40505 40506 40507 32233 32072 32074 32076 32078 32343 32070 32235 32236 32347 32238 32349

40511 40512 40513 40514 40515 40516 40517 32293 32936 32935 32933 32931 31001 32937 31002 32297 31003 32299 31004

112

www.discoverysciences.com

analytical hplc

Two-Piece High-Pressure Fittings

Double-Sided Ferrule (DSF) Fittings
Double-sided ferrule (DSF) provides twice the gripping power PEEK construction is inert and biocompatible Economical two-piece design DSF fittings have a double-sided ferrule which grips tubing in two places. This increases the holding power and decreases the force on one area of the tubing. A unique Wrench-TightTM and Finger-Tight design is available and combines the convenience of a Finger-TightTM fitting with the option to wrench-tighten when higher pressures are used.

best value

Two-Piece DSF Fitting Specifications Material: PEEK or Kel-F Max. Temperature: 100C Max. Pressure: Finger-Tight: 5000psig Wrench-Tight: 10,000psig Thread Type: 10-32 UNF Typical Use: 1/16" o.d. Tubing Connections

hplc accessories | fittings

A Two-Piece DSF Fittings

Color Material Qty.

B
Wrench-Tight/Finger-Tight Part No. (A) Short Hex-Head Part No. (B)

C
Long Hex-Head Part No. (C)

Two-Piece DSF Fittings Natural PEEK Black PEEK Replacement Ferrules (DSF) Natural PEEK Natural Kel-F

10 10 10 5

35753 35077 35740 32025

35744 37087 35740 32025

35735 37097 35740 32025

Wing-Nut Fittings
Wing-Nut provides Finger-Tight operation to 6000psig Easier to make and break connections by hand Economical two-piece design PEEK or Graph-Tite construction is inert and biocompatible
Two-Piece Wing-Nut Fitting Specifications Material: PEEK or Graph-Tite (Carbon-Reinforced PEEK) Max. Temperature: 100C Max. Pressure: 6000psig Thread Type: 10-32 UNF Typical Use: 1/16" o.d. Tubing Connections

A Two-Piece Wing-Nut Fittings

Graphic Color Material

Qty.

Part No.

Two-Piece Wing-Nut Fittings with Ferrules A Black Graph-Tite B Natural PEEK Replacement Ferrules C PEEK Ferrules PEEK
Carbon-reinforced PEEK.

10 10 10

32327 32326 32335

Stainless Steel Hex-Head and Finger-Tight Fittings

Stainless Steel Two-Piece Hex-Head Fitting Specifications Material: 300 Stainless Steel Max. Temperature: 500C Max. Pressure: 10,000psig Thread Type: 10-32 UNF for 1/16", 6-32 UNF for 1/32" Typical Use: 1/16" and 1/32" o.d. Tubing Connections Stainless Steel Two-Piece Finger-Tight Fitting Specifications Material: 300 Stainless Steel and PEEK Max. Temperature: 100C Max. Pressure: 7000psig Thread Type: 10-32 UNF Typical Use: 1/16" o.d. Tubing Connections

Stainless Steel Two-Piece Fittings

Graphic Description Length Qty. Part No.

Stainless Steel Two-Piece Hex-Head Fittings A 1/16" Nut Short B 1/16" Nut Long C 1/16" Nut Extra-Long 1/32" Nut Short D 1/16" Female Nut Ferrules E 1/16" 1/32" Stainless Steel Two-Piece Finger-Tight Fittings F 1/16" Nut Short G 1/16" Nut Long Ferrule H PEEK, 1/16"

5 5 5 10 5 5 10 5 5 5

206085 286335 306141 306101 321355 286075 30640 321185 321025 321805

www.discoverysciences.com

113

analytical hplc

Valco High-Pressure Fittings

Valco Fitting Specifications Material: 316 Stainless Steel, PEEK, or PTFE Max. Temperature: 500C (SS) 100C (PEEK and PTFE) Max. Pressure: 10,000psig (SS), 8000psig (PEEK and PTFE) Typical Use: High-Pressure Tubing Connections

hplc accessories | fittings

Valco Nuts and Ferrules

Valco Unions

5431

5697

5698

5549

5511

5512

Valco Nuts and Ferrules

Graphic Description Qty. Part No.
5520

Stainless Steel Nuts A 1/32" Nut A 1/16" Nut A 1/8" Nut Stainless Steel Ferrules B 1/32" (Type 303) B 1/16" (Type 316) B 1/8" (Type 316) PEEK Ferrules C 1/16" C 1/8" PTFE Ferrules D 1/16" D 1/8"

10 10 10 10 10 10 10 10 10 10

306101 306121 306151 30640 30646 30647 30661 30662 30671 30672
5521

5550

J Valco Unions
Graphic Size Bore

K
Part No.

Valco Tees and Crosses

5522

5523

E Valco Tees and Crosses

Graphic Size Bore

F
Part No.

Internal Unions G 1/16" G 1/16" G 1/16" G 1/16" G 1/8" G 1/8" External Unions H 1/8" Internal Reducing Unions I 1/16" to 1/32" I 1/8" to 1/16" I 1/8" to 1/16" I 1/4" to 1/8" External/Internal Reducing Unions J 1/8" to 1/16" J 1/4" to 1/8" J 1/4" to 1/8" Column Endfittings K 1/4" to 1/16" K 1/4" to 1/16"

0.25mm 0.50mm 0.75mm 1/16" 2.0mm 1/8" 2.0mm 0.25mm 0.25mm 0.75mm 1/8" 1/16" 2.0mm 1/8" 2.1mm 3.0mm

30713 30714 30715 45835 30718 30719 30731 30740 30746 45850 30755 30761 30765 30766 45905 45907

Tees E E E E Crosses F F 1/32" 1/16" 1/8" 1/8" 1/32" 1/16" 0.25mm 0.25mm 0.75mm 2.0mm 0.25mm 0.75mm 30770 30771 30773 30774 30780 30782

related products

Looking for stainless steel tubing? See pages 386 and 388.

5562

114

www.discoverysciences.com

analytical hplc

High-Pressure Adapters
Universal Direct-Connect Column Coupler
The Universal Direct-Connect Column Coupler will join any two columns, regardless of fitting type. A 10-32 threaded body accepts any of the three Kel-F tips on either side. Select the correct tip to join columns of any fitting type.
Stainless Steel Body Waters Tip Female Tip Valco Tip
A Universal Direct-Connect Column Couplers
Graphic Description Color Part No.

Universal One-Piece Coupler

Universal one-piece column couplers adapt to the stop depth of any 10-32 port. Each side of these PEEK couplers adjusts and bottoms out in the port to ensure that minimal dead volume is created.
Color-coded sleeve indicates i.d.

best seller

Waters Tip Female Tip Valco Tip

B Universal One-Piece Coupler
Description Color Part No.
6362

hplc accessories | fittings

Universal Direct-Connect Column Coupler A Universal Type* Replacement Kel-F Tips B Waters (C) B Female (B) B Valco

Red Black Blue

28638 28004 28002 28006

0.005" i.d. 0.007" i.d. 0.009" i.d. 0.020" i.d.

Red Yellow Blue Orange

336501 336502 336503 336504

*Includes one stainless steel body, two Waters tips, and two ferrule tips.

One-Piece Couplers
One-Piece PEEK Couplers have a non-wetted color-coded Delrin handle. Stop depth of the tip is fixed, and provides a reliable connection when used with matching port configurations.
One-Piece Column Couplers
Port Configuration Color

best value

Universal Direct-Connect Column Adapter

Double-sided adapter works with male or female 10-32 fittings Polymeric ferrule insert adjusts to any stop depth Seals Finger-Tight to 5000psig Inert PEEK or Graph-Tite ferrule insert
Graph-Tite ferrule insert

5441

Part No.

Female Waters Male Valco Female to Waters

Black Red Red Blue

28191 28192 28193 28194 28196

PEEK ferrule insert

Column Coupler Kits

5428

5442

Connect to female port

Connect to male port

1706b

Stainless Steel

Flip adapter around to accommodate any 10-32 fitting. Universal Direct-Connect Column Adapter
Description PEEK Part No. Graph-Tite Part No.

PEEK Column Coupler Kits*

Description

5856

Universal Direct-Connect Column Adapter Replacement Inserts Universal Adapter Kit*

*Includes two adapters and four inserts.

29242 292405 29244

29246 29247 29248

Part No.

Stainless Steel PEEK

9549 9614

*Includes two 10-32 UNF fittings, two ferrules, and a 5cm 1/16" o.d. x 0.010" i.d. tube.

www.discoverysciences.com

115

analytical hplc

High-Pressure Adapters, Plugs, and Caps

Stainless Steel Adapters, Plugs, and Caps
Stainless Steel Adapters, Plugs, and Caps Specifications Material: 300 Stainless Steel Max. Temperature: Max. Pressure: Thread Type: Typical Use: 500C 10,000psig with Stainless Steel Ferrules 10-32 UNF 1/16" o.d. Tubing

Polymeric Adapters, Plugs, and Caps

Polymeric Adapters, Plugs, and Caps Specifications Material: PEEK, Delrin, Nylon Maximum Temperature: Maximum Pressure: Thread Type: Typical Use: 100C 8000psig 10-32 UNF 1/16" o.d. Tubing

hplc accessories | fittings

5476

5477

5483

5478

6287

D
5484 5485

5479

E F

5480

5486

5470

5471

5472

5482

5481

Stainless Steel Adapters, Plugs, and Caps

Graphic Description Bore Qty. Part No.

Polymeric Adapters, Plugs, and Caps

Graphic Description Bore Qty. Part No.

Stainless Steel Adapters Union, Female A Union, Female A Union, Waters B Union, Male C Union, Male to Female D Union, Female, Finger-TightTM* E Bulkhead Union F Tee Stainless Steel Plugs G Standard (7000psig) H High-Pressure (10,000psig) Stainless Steel Cap I Standard

0.003" 0.012" 0.012" 0.067" 0.067" 0.013"

ea ea ea ea ea ea ea ea ea ea ea

77450 28627 97332 10061 28609 32110 31505 28629 30631 30636 30606

PEEK Adapters A Union B Tee C Cross D Bulkhead Union Delrin Plugs E Blue E Black E White E Red E Yellow E Green Nylon Caps F White

0.010" 0.010" 0.010"

ea ea ea ea 10 10 10 10 10 10 10

32141 32143 32145 31504 8872 18873 18874 18875 18876 18877 8870

*Finger-TightTM union has PEEK ferrule, maximum pressure 8000psig, maximum temperature 100C.

technical assistance

Contact Tech Support: Phone: 1.800.255.8324 (North America) Email: [email protected] Online: www.discoverysciences.com

116

www.discoverysciences.com

analytical hplc

High- and Low-Pressure Fittings

Flange-Free Low-Pressure Fittings
Convenient ferrule eliminates need for flanging Compatible with all 1/4-28 UNF ports The Flange-Free system makes connections to 1/4-28, flat-bottomed ports without flanging tools. Hand-tightened connections produce a leak-free seal to 500psig on 1/8" o.d. PTFE tubing and to 1000psig on 1/16" o.d. PTFE tubing. Hex-head fittings are available for use with harder tubing, such as PEEK, Tefzel, or metal.

Flanged Tubing Low-Pressure Fittings

Use with 1/8" or 1/16" flanged tubing Easily tighten without a tool
Flanged Tubing Fitting Specifications Material: PEEK with Stainless Steel Washers Maximum Temperature: 100C Maximum Pressure: Limited by Tubing Strength Thread Type: 1/4-28 UNF Typical Use: Low-Pressure Plumbing

hplc accessories | fittings

U.S. Patent #4,690,437.

Flange-Free Fitting Specifications Material: Varies, See Price Block Maximum Temperature: 100C Maximum Pressure: 1/8" 500psig 1/16" 1000psig Thread Type: 1/4-28 UNF Typical Use: 1/16" or 1/8" o.d. Tubing Connection

5542

5543

AFinger-Tight Flanged Tubing Fittings, 10/pk

Graphic Description Material

BWashers

1/16" Part No.

1/8" Part No.

5488

5489

5490

Flanged Tubing Fittings (washer included) A Natural PEEK Replacement Washers B 316 SS SS

37165 20067

37175 20068

Flange-Free Fittings, 10/pk

Graphic Description Material 1/16" o.d. Tubing Part No. 1/8" o.d. Tubing Part No.

Pre-Flanged PTFE Tubing

Chemically inert Supplied with 1/4-28 nylon fittings flanged in place

Finger-Tight Nuts A White A Black A White, Long A Black, Long A Natural Hex-Head Nuts B Aluminum B Stainless Steel Flange-Free Ferrules C Ferrules C 0.3mm Bore C 0.8mm Bore C Ferrules C Ferrules

Delrin Delrin Delrin Delrin PEEK Metal Metal PEEK Kel-F Kel-F Kel-F Tefzel

201101 201122 201131 201141 37065 200911 200936 201171 200771 200781 201152 20240

201201 201211 201221 201231 37075 200901 200926 201271 201251 20242

5539

Pre-Flanged PTFE Tubing Specifications Material: PTFE Maximum Temperature: Maximum Pressure: 100C 0.020" i.d., 1200psig 0.030" i.d., 900psig 0.063" i.d., 400psig 0.100" i.d., 300psig Low-Pressure Plumbing

Flange-Free Plus High-Pressure Fittings

Seals Finger-Tight to 5000psig Connects to any standard 1/4-28 port Available only for 1/16" tubing
6260

Typical Use:

Pre-Flanged PTFE Tubing, ea

Length o.d. i.d. Part No.

5cm 10cm 25cm 50cm 100cm

Flange-Free Plus Fitting Specifications Material: PEEK and Stainless Steel Maximum Temperature: 100C Maximum Pressure: 5000psig Thread Type: 1/4-28 UNF Typical Use: 1/16" o.d. Tubing Connection Flange-Free Plus Fittings
Description Qty. Part No.

1/16" 1/8" 1/16" 1/8" 1/16" 1/8" 1/16" 1/8" 1/16" 1/8"

0.030" 0.063" 0.030" 0.063" 0.030" 0.063" 0.030" 0.063" 0.030" 0.063"

20013 20012 20015 20014 20017 20016 20027 20018 20043 20020

Fitting System* Replacement Parts Stainless Steel Bushings PEEK Ferrules

*Includes 10 each of fittings, bushings, and ferrules.

10 10 10

25020 25022 25021

www.discoverysciences.com

117

analytical hplc

High- and Low-Pressure Adapters

PEEK Port Adapters
INTERNAL PORT TYPE
CPI Standard (B) Waters (C)

1/4-28 UNF

M6

1
CPI Standard (B)

A
Part No. 32015 Part No. 32022 Part No. 32065

hplc accessories | fittings

EXTERNAL THREAD TYPE

Waters (C)

B
Part No. 32023 Part No. 32066

1/4-28 UNF

C
Part No. 32013 Part No. 32016 Part No. 32067

D
Part No. 32014 Part No. 32017 Part No. 32024

PEEK Port Adapters

Graphic Coordinate External Thread Type Internal Port Type Part No.

M6

PEEK Port Adapters (continued)

Graphic Coordinate External Thread Type Internal Port Type Part No.

A2 A3 A4 B3 B4

CPI Standard CPI Standard CPI Standard Waters Style Waters Style

Waters Style 1/4-28 UNF M6 1/4-28 UNF M6

32015 32022 32065 32023 32066

C1 C2 C4 D1 D2 D3

1/4-28 UNF 1/4-28 UNF 1/4-28 UNF M6 M6 M6

CPI Standard Waters Style M6 CPI Standard Waters Style 1/4-28 UNF

32013 32016 32067 32014 32017 32024

PEEK Luer Adapters

INTERNAL PORT TYPE
CPI Standard (B) 1/4-28 UNF M6

1
Female

LUER TYPE

E
Part No. 20132 Part No. 20136 Part No. 20138

Male

F
Part No. 20133 Part No. 20137 Part No. 20139

PEEK Luer Adapters

Graphic Coordinate Luer Type Internal Port Type Part No.

PEEK Luer Adapters (continued)

Graphic Coordinate Luer Type Internal Port Type Part No.

E1 E2 E3

Female Luer Female Luer Female Luer

10-32 Female 1/4-28 Female M6 Female

20132 20136 20138

F1 F2 F3

Male Luer Male Luer Male Luer

10-32 Female 1/4-28 Female M6 Female

20133 20137 20139

118

www.discoverysciences.com

analytical hplc

Low-Pressure Adapters and Plugs

Chemically inert 1/4-28 threaded ports For use with Flange-Free or flanged fittings
A Low-Pressure Adapters and Plugs Specifications Material: Varies, See Price Block Maximum Temperature: 100C Maximum Pressure: Limited by Fittings Thread Type: 1/4-28 UNF
5456 5457

hplc accessories | fittings

6292

1/4-28 Low-Pressure Adapters and Plugs

Graphic Description Material Qty. Part No.

Unions A Union B Bulkhead Union C Waters Pump Tubing Union Tees D 0.8mm Bore Tee D 1.5mm Bore Tee Crosses E 0.8mm Bore Cross E 1.5mm Bore Cross Male 1/4-28 Adapters F Male 1/4-28 to Male Luer G Male 1/4-28 to Female Luer H Male 1/4-28 to Slip-Fit* I Male 1/4-28 to 1/4" o.d. Tube J Male 1/4-28 to 1/8" o.d. Tube K Male 1/4-28 to Female 10-32 Female 1/4-28 Adapters L Female 1/4-28 to 1/8" MPT M Female 1/4-28 to Female 10-32 N Female 1/4-28 to Male 10-32 O Female 1/4-28 to Female 10-32 P Female M6 to Female 10-32 Plugs Q Natural Q Black R White R White

PEEK PEEK PEEK PEEK PEEK PEEK PEEK Tefzel Tefzel PEEK SS SS PEEK Brass SS SS PEEK PEEK PEEK PEEK Nylon Kel-F

ea ea ea ea ea ea ea ea ea ea ea ea 2 ea ea ea 2 ea 10 10 5 5

20088 31506 590110 20058 20023 20059 20025 20019 20055 28848 20021 20056 32261 20053 20041 20057 32262 32264 37185 37187 20050 20089
5445 5734 5448

5813

5814

5451

5452

5733

5447

5453

*Slip-Fit fits 1/16" to 5/32" i.d. tubing. Slip-Fit Waters pump tubing to left side of union, and connect standard 1/8" or 1/16" o.d. tubing to right side of union.

5454

5455

5455

5460

5444

www.discoverysciences.com

119

analytical hplc

Low-Pressure Accessories
Easy-Flange Tool
Uses mechanical force to form flangesno electricity or heat required Forms perfect flanges on 1/16" to 1/8" o.d. PTFE or thin-walled PEEK tubing Completely portableuse it anywhere in your lab Using mechanical force (no electricity or heat required), Easy-Flange forms perfect flanges on any PTFE tubing with an o.d. between 1/16" and 1/8" or thin walled (0.015" maximum wall thickness) PEEK tubing. Simply cut the tubing to the desired length, place a fitting on the tubing, slide the tubing into the Easy-Flange body, and form the flange using the flange-rolling tool. The entire operation takes just seconds and produces flanges with superior sealing characteristics compared to flanges formed by conventional heat methods.

Low-Pressure In-Line Quick Connect

Make and break 1/16" or 1/8" tubing connections quickly and easily Eliminate wear and tear on fittings and ferrules Highly inert PEEK construction The Alltech Low-Pressure In-Line Quick Connect allows fast, effortless connection of 1/16" or 1/8" tubing where 1/4-28 fittings are used. Made from high quality PEEK, the quick connect withstands repetitive connections and is compatible with a wide range of solvents. The 1/16" quick connect withstands pressures up to 1000psig, and 1/8" quick connect withstands pressures up to 500psig.

hplc accessories | fittings

Quick Connect
5526 6156

Easy-Flange Tool
Description Part No.

Suggested Quick Connect Usage:

35900 35905 35906 35910 35909 35907 35908 35920 35902 35903

Easy-Flange Flanging Tool* Replacement Parts 1.5mm Pin (Polymer) 1.3mm Pin (Polymer) 1.3mm Pin (Titanium) 1.0mm Pin (Polymer) 0.8mm Pin (Polymer) 0.5mm Pin (Titanium) 0.8mm Pin (Titanium) Clean-Cut Tubing Cutter Replacement Blade (for Part No. 35902)

Perfect for plumbing low- and medium-pressure LC systems Use with any low-pressure switching valve Quickly swap mobile phase bottles from LC system or filtration equipment Make and break connections to an online degasser
Low-Pressure In-Line Quick Connect
Description Part No.

*Includes: Clean-Cut tubing cutter and insert disks 35908, 35907, 35906, 35910, 35920.

1/16" Quick Connect 1/8" Quick Connect

77301 77302

related product

Looking for low-pressure tubing? See page 387.

related product

Looking for low-pressure 1/4-28 fittings? See page 117 for Flange-Free fittings. See page 117 for flanged fittings.

5531

120

www.discoverysciences.com

analytical hplc

Fitting and Accessory Kits

Basic Start-Up Package
Provides the essential products for HPLC system start-up. No frills and no unnecessary cost.

Advanced Start-Up Package

Keeps your HPLC consumables stocked for some time with products that maximize system and lab efficiency.

best value

best value

hplc accessories | fittings

6283

6282

Basic Start-Up Package

Description Material Qty. Part No.

Advanced Start-Up Package

Description Material Qty. Part No.

Basic Start-Up Package Replacement Individual Components Short Hex-Head Nuts/Ferrules Long Hex-Head Nuts/Ferrules Short Finger-Tight One-Piece* 1/8" Flange-Free Nuts 1/8" Flange-Free Ferrules 1/16" x 0.020" i.d. Tubing 1/16" x 0.007" i.d. Tubing 1/8" x 0.063" i.d. Tubing Plastic Tubing Cutter Replacement Blade 10m Solvent Inlet Filter 20L Sample Loop Open-End Wrench, 1/4" x 5/16" Union

PEEK PEEK PEEK PEEK Tefzel PEEK PEEK TFE SS PEEK PEEK

1 10 10 12 10 10 10ft 10ft 10ft 1 1 2 1 1 1

97817 35744 35735 32070 37075 20242 35708 35712 20063 3206 3214 28870 32195 1998 32141

Advanced Start-Up Package Replacement Individual Components Short Hex-Head Nuts/Ferrules Long Hex-Head Nuts/Ferrules Short Finger-Tight No-SlipTM Fitting* Long Finger-Tight No-SlipTM Fitting 1/8" Flange-Free Nuts 1/8" Flange-Free Ferrules 1/16" x 0.020" i.d. Tubing 1/16" x 0.005" i.d. Tubing 1/8" x 0.063" i.d. Tubing Clean-Cut Tubing Cutter Replacement Blade 10m Last-Drop Inlet Filter In-Line Filter, 2m Replacement Filter Elements 20L Flex-Connect Sample Loop 100L Flex-Connect Sample Loop Handy-Lok Fitting Wrench Open-End Wrench, 1/4" x 5/16" Union
*Assorted Colors

PEEK PEEK PEEK PEEK PEEK Kel-F PEEK PEEK TFE PAT PAT PAT PEEK PEEK PEEK

1 10 10 24 10 10 10 20ft 20ft 10ft 1 2 2 1 5 1 1 1 1 2

97818 35744 35735 32937 32295 37075 201251 35708 35714 20063 35902 35903 28839 68250 68152 32195 32204 35751 1998 32141

related products

Accessories for your system. Grace has an assortment of Accessories Quick Reference guides available for many popular instruments.

Waters Alliance System Accessories Request M202

Agilent 1100 and 1200 System Accessories Request M203

Waters Acquity UPLC System Accessories Request M204

www.discoverysciences.com

121

analytical hplc

Alltech Fitting Kits

Find all common accessories in one convenient kit Fittings to match your HPLC system Includes both high- and low-pressure fittings Alltech Fitting Kits provide all the necessary HPLC accessories conveniently stored in one place. You will always find what you need to keep your system running. The chart lets you determine how many of each product are included in each systems fitting kits.

hplc accessories | fittings

6261

Fittings Kits
System Components Part No. Material Beckman 97137 PerkinElmer 97148 Rheodyne* 97130 Shimadzu* 97151 Universal 97145 Waters 97155

Nuts Universal SS Male Nut Two-Piece Finger-Tight Universal Wrench-Tight/Finger-Tight 1/16 Flange-Free (1/4-28) Long Universal SS Male Nut One-Piece Fitting Long Finger-Tight One-Piece Standard Wrench-Tight/Finger-Tight Ferrules Universal SS Ferrule Ferrule for Two-Piece Finger-Tight Double-Sided Ferrule 1/16 Flange-Free Ferrule Plugs 10-32 Plug SSI Products Nut Ferrule Rheodyne Products Bushing Long Bushing Extra-long Bushing Ferrule Unions PEEK Female Union SS Male Union Waters Female Union Adapters Universal Column Adapter Tubing, EDM-Cut 0.010 i.d. x 5cm 0.010 i.d. x 10cm 0.010 i.d. x 20cm 0.020 i.d. x 5cm 0.020 i.d. x 10cm 0.020 i.d. x 20cm
*Can also be used for Spectra-Physics.

206085 32310 35754 201101 28633 32232 32234 35752 286075 32322 35730 201152 8872 01-0140 01-0142 77510 77512 77519 77511 32141 10061 97332 29242 97045 97055 97060 97075 97080 97085

316 SS PEEK PEEK Delrin 316 SS PEEK PEEK PEEK 316 SS PEEK PEEK Kel-F Delrin 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS PEEK 316 SS 316 SS PEEK/SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS

15 2 5 6 20 4 10 6 2 1 5 5 5 5 5 5

5 2 5 6 10 4 10 6 2 4 4 4 2 2 10 1 5 5 5 5 5 5

4 2 4 6 10 4 2 10 5 5 4 2 2 10 3 1 5 5 5 5 5 5

10 2 5 2 4 10 4 10 2 4 4 10 10 1 5 5 5 5 5 5

5 15 2 10 30 3 1 1 5 5 5 5 5 5

2 5 6 10 20 4 10 6 2 1 5 5 5 5 5 5

122

www.discoverysciences.com