Cryofuges

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Thermo Scientific Heraeus Cryofuge Centrifuges

Large volume refrigerated centrifuges for practical work in blood banks and biotechnology.

Part of Thermo Fisher Scientific

Thermo Scientific Heraeus Cryofuge Refrigerated Centrifuges


Our Heraeus Cryofuge centrifuges are attractively designed, large volume, floor standing, refrigerated models offering optimised technology for lowspeed applications. They are ideal for use in blood banks, biotechnology and the pharmaceutical industry, where large volumes require high speeds and constant temperatures.
The use of sophisticated microelectronics systems and high strength materials for rotors and accessories guarantees outstanding reproducibility and highly-accurate centrifugation. The Heraeus Cryofuge 6000i offers a top speed of 4240 rpm (6010 x g) while the Heraeus Cryofuge 8500i offers a top speed of 5050 rpm (8525 x g). Safety When designing our Heraeus Cryofuge centrifuges, all international safety standards were kept in mind to guarantee the highest level of safety. Diagnostic and fault messages are clearly visible. Pre-selection of buckets protects against overspeeding. The lid lock system and steel armoured rotor chamber further ensure safe operation. A key operated switch safeguards against unauthorised use.

Highest Versatility Swinging-bucket rotors for the Heraeus Cryofuge series centrifuges support a diverse array of sample processing applications without the need to modify existing protocols.

Our Heraeus Cryofuge centrifuges work with the Thermogenesis APX system to automatically separate cord blood into a freezing bag (for the mononuclear cell product), an erythrocyte bag and an excess plasma bag.

Convenient Operation The SEPACONTROL operating panel is systematically arranged, clearly displaying all functional areas and allowing easy access to operating parameters. Visual diagnostic indicators and acoustic signals supplement the information supplied by the microcomputer. This makes the centrifuge easy to use right from the start. The delay function permits users to delay system start-up.

Panel Five visual displays facilitate the identification of problems during centrifugation. When the lid is opened, the rotor is unevenly balanced. In the event of a system error, programming error, or if the temperature limit has been exceeded, an LED signals a warning. Memory Control 33 memory locations are available to save run parameters for future use. New programs generated using the function panel can be immediately added to the library.

Status The status field is systematically arranged into the following areas: start-up and braking curves, speed and rotor data, time and temperature. LEDs prevent the user from confusing the values on the display. Software for Sample Tracking Heranet software allows users to document centrifugation in blood banks. The software saves actual and set values and processes information which is entered at the centrifuge, using a barcode reader.

Easy Opening and Closing The robust, automated lid-lock mechanism protects operators and makes lid openings and closures effortless.

Easy Set-Up, Programming and Monitoring An intuitive operator keypad allows you to recall protocols at the touch of a button. Only five keys are required for completely programming all parameters.

Easy User Access Front panel controls allow users to start, stop and open the lid of the centrifuge. Whisper-Quiet Operation A noise level under 58 dBA provides the lab with a more comfortable working environment.

Energy-Efficient Performance Energy-saving design increases refrigeration efficiency and minimizes heat output, ensuring a more comfortable working environment.

BUCKETS AND ACCESSORIES Complete Sample Preparation Solutions

Double Bucket for Blood Packs


Ordering Information Model Cat. No. Max. speed (rpm) Max. RCF (x g) Max. capacity Max. perm. mass (g) Min. temp. at max. RCF* Max. acceleration time (s) Min. braking time (s) Radius (cm)

Heraeus Cryofuge 6000i


75007617 4,000 5,312 2 x 950 ml 3,500 5 C 140 180 29.7

Heraeus Cryofuge 8500i


75007617 4,000 5,312 2 x 950 ml 3,500 5 C 140 180 29.7

Technical data Operation with blood packs No. of pack systems/bucket Polyamide plastic inserts: Order no. M2) Opening M (mm) Order no. L1) Opening L (mm) Order no. XL3) Opening XL (mm) Order no. XXL4) Opening XXL (mm) double-quint 2 76007667 110 x 57 76007647 110 x 70 76007657 110 x 76 76007677 110 x 88

* At ambient temp. of 25 C M, L and XL plastic inserts come complete with balancing weights 75007645. One set of balancing weights includes 4 weights of 6 and 15 g each. Balancing plates 75005759 can be used to compensate big weight differences. One set includes 2 plates at 35 and 65 g each. The balancing insert 75007668 consists of an XL plastic insert, 2 balancing weights and 30 balancing plates, enabling compensation of up to a full bucket load. 1) Suitable for triple and quad systems. 2) Suitable for double systems. 3) Suitable for quad systems, systems with soft filters. 4) Suitable for quad and quintuple systems, systems with filters..

Ordering Information Additional Accessories for Blood Pack Operation 75006681 75005759 75015638 12 rubber volume compensation plates 4 rubber balancing plates Hook adapter for Cord Blood Seperations (max RCF 1,328xg)

Double Rectangular Bucket


Ordering Information Model Cat. No. Max. speed (rpm) Max. RCF (x g) Max. capacity Max. perm. mass (g) Min. temp. at max. RCF* Max. acceleration time (s) Min. braking time (s) Radius (cm)
* At ambient temp. of 25 C 1) Boehringer Mannheim or Hitachi-sample racks

Heraeus Cryofuge 6000i 76008078 4240/3006 4984/2506 24 x 15 ml/3 racks1


2500/1800 4 C 150 190 24.8

Heraeus Cryofuge 8500i 76008078 5050/3006 7070/2506 24 x 15 ml/3 racks1


2500/1800 +6 C 190 220 24.8

Accessories for Standard Tubes in Rectangular Bucket


Ordering Information Nominal volume of tube (ml) No. of tubes per adaptor No. of tubes per rotor Type of tube Max. length of tube (mm) Max. tube (mm) Max. cap (mm) Colour of adaptor Adaptor order no. (7500xxxx) 1.5 40 480 ML 45 11 black 5335 7 20 240 DIN 110 13 14 yellow 5321 7 12 144 B. Coll. 110 14 18 grey 5330 15 12 144 DIN 111 17 18 red 5322 15 11 132 B. Coll. 109 17 19.5 white 5327 15 61) 72 Con. 121 17 23 brown 5387 25 5 60 DIN 100 25 25.9 orange 5323 25 4 48 Univ. 120 25.5 31 green 5391 50 2 24 DIN 130 35 36 green 5324 50 2 24 Con. 120 29.5 37.5 gr./yel. 5386 50 6 36 Con. 117 29 35 nat. 2261 50 2 24 Univ. 120 29.5 37.5 gr./yel. 5389 100 1 12 DIN 120 45 48 blue 5325 150 1 12 DIN 120 55 black 5326

1) Make sure that the bucket swings out correctly when all places are used. Type of tube: ML = microlitre tube; B. Coll. = blood collection tube; Con = disposable conical tube; Oil test = oil test tube, pear shaped; Univ. = universal container (with vertical edge, disposable conical type). Standard tube: a) 1.5 ml microlitre tubes, b) borosilicate glass, c) 12 ml Nunc.-screw cap tube, d) oil test tube, pear shaped, e) 50 ml disposable conical screw cap tube. Adaptors can be used with tubes with the following shape bottom: F = flat, R = round, C = conical, S = special

BUCKETS AND ACCESSORIES

Round Bucket
Ordering Information Model Cat. No. Max. speed (rpm) Max. RCF (x g) Max. capacity Max. perm. mass (g) Min. temp. at max. RCF* Max. acceleration time (s) Min. braking time (s) Radius (cm)
*At ambient temp. of 25 C Aerosol tight cap (order no. 75008081) available on request.

Heraeus Cryofuge 6000i


75008165 4,240 6,010 1 x 1000 ml 3,200 4 C 150 190 29.9

Heraeus Cryofuge 8500i 75008165 5,050 8,525 1 x 1000 ml 3,200 +8 C 190 220 29.9

Accessories for Large Volume Tubes in Round Bucket


Ordering Information Nominal volume of tube (ml) No. of tubes per adaptor No. of tubes per rotor Type of tube Max. length of tube (mm) Max. tube (mm) Max. cap (mm) Colour of adaptor Adaptor order no. (7500xxxx) 250 1 6 DIN 190 59 nat. 66494) 2502) 1 6 Div./H. 190 62.5 nat. 8144 250 1 6 Corni. 190 61.5 nat. 8147 500 1 6 H 190 70 nat. 8145 650 1 6 DIN 1953) 84 nat. 66376) 750 6 H 148 100 87 1000 1 6 H 190 100 87 1000 6 HST 175 99.5 Bp 1 6 Sing.-trip. nat. 6639

Nominal volume of tube: Bp. = blood pack, Type of tube: Div. = diverse, Corni. = Corning bottle, H = Heraeus tube, HST = Heraeus stainless steel tube Standard tube: b) borosilicate glass. 2) Additional pad for conical tubes required from manufacturer, 3) Only use without cap 75008081, 4) Pad 75001808 required, 6) Pad 75001913 required, 7) max. speed 2,600 rpm Adaptors can be used with tubes with the following shape bottom: F = flat, R = round, C = conical, S = special

Accessories for Standard Tubes in Round Bucket


Ordering Information Nominal volume of tube (ml) No. of tubes per adaptor No. of tubes per rotor Type of tube Max. length of tube (mm) Max. tube (mm) Max. cap (mm) Colour of adaptor Adaptor order no. 1.5/2 48 288 ML 42 11 black 75008132 7 35 210 DIN 177 13 14 yellow 75008133 7 27 114 B. Coll. 162 14 18.5 black 11210822 15 19 114 DIN 177 17 18.5 red 75008135 15 17 102 B. Coll. 177 17 20 white 75008136 15 12 72 Con. 177 17 23.7 brown 75008137 25 7 42 DIN 177 25 31 orange 75008138 50 4 24 DIN 177 35 39 green 75008140 50 7 42 Con. 177 29.5 39 black 11210826 100 2 12 DIN 177 45 47.5 blue 75008142

Type of tube: ML = microlitre tube; B. Coll. = blood collection tube, Con = disposable conical tube Standard tube: a) microlitre tubes, b) borosilicate glass, c) 15 ml disposable conical screw cap tube, e) 50 ml disposable conical screw cap tube. Adaptors can be used with tubes with the following shape bottom: F = flat, R = round, C = conical.

SPECIFICATIONS AND ORDERING INFORMATION

Thermo Scientific Cryofuge Refrigerated Centrifuges


Specifications Model Description Max. speed Max. RCF Max. capacity Control and drive Acceleration and braking profiles Runtime Program memory Heraeus Cryofuge 6000i Heraeus Cryofuge 8500i Large volume refrigerated Large volume refrigerated floor standing centrifuge floor standing centrifuge 4240 rpm 5050 rpm 6010 x g 8525 x g 6 x 1000 ml bottles or 12 blood bags 6 x 1000 ml bottles or 12 blood bags 550 ml each 550 ml each High performance induction drive, High performance induction drive, SEPACONTROL with microprocessor SEPACONTROL with microprocessor 9/10 profiles 9/10 profiles 1 min 99 hrs, continuous operation 1 min 99 hrs, continuous operation 33 user centrifugation programs, one of which with freely combinable braking and acceleration curves, key operated switch for protection against unauthorised access, data last used saved, in the case of a power interruption data saved for unlimited period of time. 20 C to +40 C 20 C to +40 C Lid lock and interlock, imbalance cut-out, steel armoured chamber Sturdy, torsion resistant steel design with stainless steel rotor chamber 1178 x 800 x 905 mm 1178 x 800 x 905 mm 445 kg 445 kg 4.2 kW 5.4 kW 1.9 kW 1.9 kW 25A 25A European directive 2006/95/EC for Low voltage equipment: DIN EN 601010-1 2nd edition; IEC 61010-2-20 2nd Edition; IEC 60529 protection version IP20 European directive 2004/108/EC for Electromagnetic compatibility: DIN EN 61326 CLASS A (for EMC) 75006606 75006606 included in basic package included in basic package

Temperature control range Safety features Design Dimensions (hxwxd) Weight (excl. rotor) Power consumption Refrigeration unit Recommended fuse Designed and tested in acc. with

Rotor Wind-shielded rotor with lid

Ordering Information Electrical Configuration 220 V, 50 Hz, Single Phase 230 V, 50 Hz, Single Phase 400 V, 50 Hz, 3 phase 220 V, 60 Hz, Single Phase GMP model* 400 V, 50 Hz, 3 phase with built-in refrigeration unit 400 V, 50 Hz, 3 phase for external refrigeration unit Heraeus Cryofuge 6000i 75007520 75007526 75007521 75007528 75007562 75007566 Heraeus Cryofuge 8500i 75007550

75007561

* external refrigeration unit required when operating a GMP unit (part number 75015709

Protecting Your Investment Centrifuge rotor maintenance is critical to the safety of your lab. We offer rotor safety seminars and rotor inspection clinics to ensure the longevity of your investment, and the safety of your workplace. If you would like to learn more about hosting a clinic at your facility or taking part in one at one of our facilities, please contact your local representative for further information.

2008 Thermo Fisher Scientific Inc. All rights reserved. Hitachi is a registered trade mark of Hitachi Koki Co., Ltd. Corning is a registered trademark of Corning, Inc. All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representative for details.

North America: USA/Canada +1 866 984 3766 www.thermo.com/centrifuge Europe: Austria +43 1 801 40 0, Belgium +32 2 482 30 30, France +33 2 2803 2000, Germany national toll free 08001-536 376, Germany international +49 6184 90 6940, Italy +39 02 02 95059 434-254, Netherlands +31 76 571 4440, Nordic countries +358 9 329 100, Russia/CIS +7 (812) 703 42 15, Spain/Portugal +34 93 223 09 18, Switzerland +41 44 454 12 12, UK/Ireland +44 870 609 9203 Asia: China +86 21 6865 4588 or +86 10 8419 3588, India +91 22 6716 2200, Japan +81 45 453 9220, Other Asian countries +852 2885 4613 BRO-LECF-CRYO-0108 Countries not listed: +49 6184 90 6940 or +33 2 2803 2000

You might also like