DMVD
DMVD
DMVD
7.31
Technical description The DUNGS double solenoid valve DMV integrates two solenoid valves in one compact fitting. - Automatic shut-off valves as per DIN EN 161 Class A Group 2. - Two A valves in one housing - Double seat valves - High flow rates - Max. operating pressure up to 0.5 bar - Fast closing - Fast opening (DMV-D/11) or slow opening (DMV-DLE/11) with adjustable fast stroke for start gas volume - Adjustable main volume - DC solenoid - Mountable closed position signal contact - Compact, light-weight
Application Double solenoid valves are used where two single valves were mounted previously. In connection with DUNGS gas regulators and additional components, a wide variety of regulating tasks can be performed. It does not contain any non-ferrous metals, suitable for gases of up to max. 0.1 vol.% H2S, dry. Suitable for gases of families 1, 2, 3 and other neutral gaseous media. Approvals EC type test approval as per EC Gas Appliance Directive: DMV-5040-5125/11 CE-0085 AN 2801 EC type test approval as per EC Pressure Equipment Directive: DMV-5040-5125/11 CE0036 Approvals in other important gas consuming countries.
16
DMV-D/11 DMV-DLE/11
Two single-stage solenoid valves normally closed, fast opening, fast closing. Manual limitation of flowing gas volume by main volume setting (D) at valve 1 (V1). Two single-stage solenoid valves normally closed, slow opening (L), fast closing. Opening time setting (E) with fast stroke section at valve 2 (V2). Manual limitation of flowing gas volume by main volume setting (D) at valve 1 (V1).
Specifications Nominal diameters Flange DN 40 50 65 80 100 125 Connection flange as per DIN 2501 Part 1, to fit preweld flanges as per DIN 2633 (PN 16) DN 40 to DN 125, ISO 7005 - 1 (PN 16), ISO 7005 - 2 (PN 16) Construction length as per DIN 3202 Part 1, row F1 for DN 65 to DN 125 500 mbar (50 kPa) Automatic shut-off valve as per EN 161: Class A, Group 2 Automatic shut-off valve as per EN 161: Class A, Group 2 <1s DMV-D/11: < 1 s DMV-DLE/11: approx. 20 s at room temperature +20C and without fast stroke Adjustable Adjustable Housing: aluminium, steel, no non-ferrous metals Seals at valve seat: NBR basis, suitable for gases as per G260/l -15 C to +60 C Solenoid vertically upright to lying horizontally Sieve installed. To protect the complete gas train we recommend you to install an upstream gas filter (refer to Datasheet 2.03) G 1/4 DIN ISO 228 centrally upstream of V1 and downstream of V2 G 1/8 DIN ISO 228 on both sides upstream of V1, between V1 and V2, downstream of V2 G 3/4 ignition gas flange as per ISO 228, possible on both sides between V1 and V2 50 - 60 Hz, 220 V - 240 V AC, -15% +10%, further voltages on request Other preferred voltages: 110 V - 120 V AC, 24 V - 28 V DC Version DMV-D(LE) 5040/11 DMV-D(LE) 5050/11 DMV-D(LE) 5065/11 DMV-D(LE) 5080/11 DMV-D(LE) 5100/11 DMV-D(LE) 5125/11 IP 54 / 100 % PG* 11 cable gland, plug connection as per DIN EN 175301-803 on request (* = heavy-gauge conduit thread) Degree of interference N Type K01/1 (DIN tested), can be mounted on V1 and V2
26
Max. operating pressure Solenoid valve V1 Solenoid valve V2 Closing time Opening time Fast stroke Main valve restrictor Materials of gas conveying parts Ambient temperature Installation position Dirt trap Measuring gas connection Ignition gas connection Voltage/frequency Rating / power consumption at 230 V AC, + 20C
Approx. operating current [A] 0.37 0.37 0.46 0.46 0.56 0.84
Degree of protection / switch-on duration Electrical connection Radio interference Closed position signal contact
PG 11 (Option)
Plug-in base
e f
Version
Order No. (PG11) 5040/11 5050/11 5065/11 5080/11 5100/11 5125/11 5040/11 5050/11 5065/11 5080/11 5100/11 5125/11 224 380 224 381 224 382 224 383 224 384 224 385 224 923 224 924 224 925 224 926 226 111 226 107
pmax. [bar] 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Dimensions [mm] a e c d b 240 240 290 310 350 400 240 240 290 310 350 400 62.5 73 87 104 119 142 62.5 73 87 104 119 142 192 192 251 293 331 412 220 220 269 312 382 462
1)
f 150 165 185 200 220 255 150 165 185 200 220 255
Solenoid No. 1211 1212 1411 1511 1611 1711 1211 1212 1411 1511 1611 1711
Switching rate/h1) 1000 1000 1000 1000 1000 1000 100 100 100 100 100 100
Weight [kg] 7.8 8.3 14.6 23.6 30.6 50.6 7.9 8.4 14.8 24.1 31.1 51.1
DMV-D DMV-D DMV-D DMV-D DMV-D DMV-D DMV-DLE DMV-DLE DMV-DLE DMV-DLE DMV-DLE DMV-DLE
330 330 450 510 600 750 330 330 450 510 600 750
100 100 102 129 143 161 100 100 102 129 143 161
36
Equipment variants of DMV.../11 double solenoid valve, single-stage mode DMV-D DMV-DLE Sieve Gas pressure switch can be mounted: on flange downstream of sieve downstream of valve 2 Valve V1, double-seat Valve V2, double-seat Valves opening separately G 3/4 ignition gas flange can be mounted () -= = = standard on request not possible
46
System accessories The double solenoid valve is prepared for direct mounting of DUNGS system accessories and additional equipment. Information on system accessories VPS 504 valve proving system Datasheet 8.10 Pressure limiter B, NB...A2 for multiple actuators Datasheet 5.08
56
Compact pressure switch for multiple actuators GWA5 Datasheet 5.02 K01/1 closed position signal contact to monitor closed position of valves Datasheet 12.01
Double solenoid valve Flow diagram DN 40 - DN 125 nominal diameters DMV-D/11 DMV-DLE/11
V-D (LE )5 04 0/1 DM 1D V-D N4 DM (LE 0 V-D ) 5 (LE 050 /11 )5 06 5/1 DN 5 1D 0 DM N6 V-D 5 (LE )5 08 DM 0/1 V-D 1D (LE N8 )5 0 10 0/1 1D N1 0
p [mbar]
DM
10 6 5
4 3 2
1 10 20 30 40 50 60 80 100 200
DM
V-D (
300 400
600 8001000
LE
20
)5
12
5/1
+ 15 C, 1013 mbar, trocken + 15 C, 1013 mbar, dry + 15 C, 1013 mbar, sec + 15 C, 1013 mbar, secco
1D
30
N1
40
25
2000
3000 4000
20
30
40 50 60
f=
Dichte Luft Spec. weight air poids spcifique de l'air peso specifico aria Dichte des verwendeten Gases Spec. weight of gas used poids spcifique du gaz utilis peso specifico del gas utilizzato
V Luft/air/air/aria x f
We reserve the right to make any changes in the interest of technical progress. Head Offices and Factory Karl Dungs GmbH & Co. KG Siemensstrae 6-10 D-73660 Urbach, Germany Telephone +49 (0)7181-804-0 Fax +49 (0)7181-804-166 Postal address Karl Dungs GmbH & Co. KG Postfach 12 29 D-73602 Schorndorf, Germany e-mail info@dungs.com Internet www.dungs.com
66