Ficha Tecnica Genset

Technical Data
February 2012
John Deere 3029 TF158
CGT Stamford PI 144
Generator Model:
BCJD 40-60
60 Hz
3-Phase
Power Factor
Cos = 0.8
STANDBY POWER (LTP)
kVA 50 50 50 50 50 kWe 40 40 40 40 40 Amps 60 66 69 120 131
RATINGS Voltage 480/277 440/254 416/240 240/138 220/127
PRIME POWER (PRP)

kVA 46 46 44 46 46 kWe 37 37 35 37 37
Definition of Ratings & Reference Conditions

Prime Power (PRP) is the nominal output continuously available, where the average load (variable) does not exceed 70% of the prime power rating. 10% overload is available for a maximum of 1 hour in 12 hours of operation. Standby Power (LTP) is the maximum output available, for up to 500 hours per year, where the average load (variable) does not exceed 70% of the standby power rating. No overload is available. Standard Reference Conditions: air temperature 25C (77F), barometric pressure 99kPa, [110m (361ft) altitude], 30% relative humidity. Note: The above ratings may be subject to derate at different operating conditions. Please see the Derate Guidelines on the Broadcrown Website. All power ratings and reference conditions in accordance with ISO 8528-1 and ISO 3046-1.
Key Features:
Efficient water cooled John Deere diesel engine. Single bearing CGT Stamford alternator Radiator with pressure cap and drain point Fully guarded engine-driven fan Fully welded steel skid base with fork lift pockets Integral fuel tank with filler cap and gauge Heavy duty rubber anti-vibration mountings 12V starter battery and connecting cables Separate engine-driven battery charging alternator Spin on oil and fuel filters and dry type air filter element Industrial silencer (15dBA reduction) supplied loose Key Start control system with analogue instruments Main line circuit breaker Factory Test Certificate Operation & Maintenance Manual Wide range of optional extra features available
Overall Dimensions & Weights - Open Set
Length (L) = 2080mm [82in] Width (W) = 680mm [27in] Height (H) = 1420mm [56in] Dry Weight (inc oil) = 725kg [1600lb] Operating Weight = 870kg [1920lb]
Typical Open Generator Sound Pressure Level at 1m, Free Field (dB)
Overall dBA 96 63 Hz 82 125 Hz 83 250 Hz 88 500 Hz 91 1000 Hz 92 2000 Hz 89 4000 Hz 84 8000 Hz 78
All designs and specifications subject to change without notice
BCJD 40-60
February 2012
ENGINE & COOLING SYSTEM

SI Units Engine Speed Gross Power Fan Power Net Power Emissions Certification Altitude Capability Cylinders / Type Aspiration / Charge Cooling Governing / Engine Management Bore / Stroke Cubic Capacity BMEP Fuel Consumption at 100% Power Fuel Consumption at 75% Power Fuel Consumption at 50% Power Total fuel flow Standard Fuel Tank Capacity Engine Air Flow Maximum Air Intake Restriction (used filter) Exhaust Gas Flow Exhaust Gas Temperature Maximum Exhaust Back Pressure Typical Exhaust Pipe Diameter Radiator Cooling Air Flow Max Restriction to Cooling Air Flow Max Radiator Air-On Temperature Maximum Coolant Temperature Coolant Capacity - Engine Only Total Coolant Capacity Total Oil Capacity incl Filters Typical Oil Pressure at Rated Speed Typical Oil Consumption (>250hrs Operation) Heat Rejection to Engine Cooling Water Heat Rejection to Charge Cooler Heat Radiated From Engine (Typical) Electrical System Voltage Battery Type Battery Capacity SAE CCA Performance r/min kWm kWm kWm m [US Units] [rpm] [bhp] [bhp] [bhp] [ft.]
JOHN DEERE 3029 TF158

PRIME
1800 43 [ 58] 2 [ 2.7 ] 41 [ 55] x 2285 [ 1000 ] 1525 [ 1000 ] 48 [ 64] 2 [ 2.7 ] 46 [ 62]
STANDBY
mm litres kPa litres/h litres/h litres/h litres/h litres m/s kPa m/s C kPa mm m/s Pa C C litres litres litres kPa litres/h kW kW kW
[in.] [cu.in.] [psi] [gal/h] [gal/h] [gal/h] [gal/h] [gal] [cfm] [inWG] [cfm] [F] [inWG] [in.] [cfm] [inWG] [F] [F] [gal] [gal] [gal] [psi] [pt/h] [btu/min] [btu/min] [btu/min] V A
3 cyl / inline / 4-stroke Turbocharged / None Mechanical Governor 106 / 110 [ 4.19 / 4.33 ] 2.9 [ 179 ] 984 [ 143] 11.1 [ 2.9] 8.7 [ 2.3 ] 6.0 [ 1.6 ] 111 [ 29] 155 [ 41] 0.058 [ 124] 6.25 [ 25] 0.142 [ 300] 480 [ 896] 7.5 [ 30] 65 [ 2.5 ] 1.1 280 50 105 5.7 16.5 9.0 345 0.03 25 [ 1423]
n/a [ 2331] [ 1.1 ] [ 122] [ 221] [ 1.5 ] [ 4.4] [ 2.4 ] [ 50] [ 0.06]
General
1099 [ 159 ] 12.4 [ 3.3] 9.6 [ 2.5 ] 6.7 [ 1.8 ]
Fuel
Air
0.060 [ 127] 0.153 [ 325] 505 [ 941]
Thermal
Oil
Cooling
Exhaust
28 [ 1594] 6.0 [ 342] 12 1 X 643 660
5.4 [ 306]
Elec
ALTERNATOR
SI Units Manufacturer Model (may vary with voltage) Operating Temperature Coupling / No. of Bearings Phase / Poles / Winding Type Power Factor Excitation Insulation System AVR Type Voltage Regulation [US Units]
CGT STAMFORD PI 144

PRIME STANDBY
[F]
Cummins Generator Technologies - STAMFORD PI 144 J PI 144 J 40 [104] 27 [81] Direct / Single Bearing 3-Phase / 4-Pole / Winding 311 Cos = 0.8 Self Excited Class H SX 460 1.0%
General Data
BCJD 40-60
February 2012
STANDARD CONTROL SYSTEM

The standard control system for this model is the BC 7210 Auto Start system, based on the DSE 7210 control module, which provides : Automatic remote start Overspeed protection Underspeed protection Low oil Pressure protection High coolant temperature protection Fail to Start indication Automatic cool-down timer function Optional - Common Alarm & System In Auto volt-free contacts
BC 7210 Digital Auto Start
Together with digital displays for : Volts, Amps and Frequency Engine operating hours This system also has an increased digital input/output count for external options and, being cost effective in comparison with the optional (BC 701) analogue system, is the preferred choice for most customers.
CONTROL SYSTEM OPTIONS

BC 7310 & BC 7320 control systems (just the DSE modules shown here) provide complete power monitoring and protection facilities. Compared to BC 7210, addition features include : Pre-alarms for Low Oil Pressure and High Coolant Temperature Digital display of kW, kVA and Power Factor Under/Over Volts protection Over Current Protection Full RS485 Telemetry implementation as well as full SAE J1939 CANBus implementation. In fact, all generating sets driven by engines with onboard ECU/CANBus come with this system as standard.
The BC 7320 provides full AMF functionality with integrated mains monitoring and generator/mains contactor control. BC 7510 & BC 7520 control systems provide the same features as BC 7310 & BC 7320 respectively, plus : BC 7510 - Set-to-Set Synchronisation BC 7520 - Single Set-to-Mains Synchronisation with integrated mains monitoring For Multi Set-to-Mains synchronisation, each set requires BC 7510 with the addition of one mains monitoring panel BC 7560 (not illustrated). See the Synchronisation Guidelines for further details.
The optional control system for this model is BC 701 (photo), based on the Deep Sea Electronics DSE701 Key Start controller. This provides for the manual control of the generator via a two-position key switch and membrane push button for Start, together with Overspeed, Low Oil Pressure and High Coolant Temperature protection. LED indications for protection operation & charge alternator fail Analogue voltmeter with 7-position selector switch Analogue ammeter with 4-position selector switch Analogue frequency meter Analogue gauges for Oil Pressure, Coolant Temp & Charge Amps Engine hours counter Emergency Stop button One auxiliary input for optional features Optional - analogue kW meter, Generator Running volt-free output
The panel is constructed in 1.5mm steel, powder coated to RAL9001 for a high quality, durable finish with side-hinged door.
BCJD 40-60
February 2012
OPTIONAL ACOUSTIC ENCLOSURE
Canopy 1
The optional acoustic enclosure for this model is Canopy 1, suitable for operation in harsh outdoor environmments whilst providing excellent security and acoustic performance. All steel canopy components are pre-treated and polyester powder coated (to a typical thickness of 70-80m) in RAL9001 white and the baseframe is finished in RAL9005 black. Acoustically, the canopy is designed to meet the requirements of EU Legislation 2000/14/EC, achieved by extensive use of fire-retardant polyurethane foam together with efficient management of cooling air. Exhaust noise is minimised by internally mounted high performance exhaust silencers. A steel fuel tank with filler, gauge and accessory points, is integrated within the baseframe. Alernatively, a bund with separate fuel tank can be provided where this is required. Other key features include : Gull-wing doors with gas struts for good service access Panel/breaker access door with viewing window Heavy duty locks on all doors for total security Weather cap on exhaust discharge Emergency Stop button relocated to canopy exterior Lifting and holding down points Fork Lift pockets Optional single roof lifting point.
Dimensions mm [in] L x W x H
Additional Weight kg [lbs] [
Typical Sound Pressure Level at Standby Power dB(A) at 1m [3ft] dB(A) at 7m [23ft]
Fuel Tank Capacity Litres [US gal] Integral Bunded
Single Point Lift
2261 [89.0]
851 [33.5]
1621 [63.8]
235 [518]
82
72
115 [30.4]
100 [26]
Optional
[ Indicative weight of canopy additional to open set Typical SPL is a mean level, measured in free field conditions, with no contributory background noise.
KEY MECHANICAL OPTIONS (Open Set)

Engine & Cooling : Electronic governor Oil and coolants drains extended to edge of baseframe Manual lub oil drain pump Coolant heater Medium duty air cleaner Exhaust manifold guards Fuel System : Baseframe with integral bund and drop-in fuel tank Fuel filter/separator Low fuel level switch (single point) Fuel level switch (four point) Manual fuel transfer pump Pumped/gravity fuel transfer system
Alternator : Anti-condensation heater Quadrature droop kit Alternative AVR Thermistor probes and controls
Exhaust System : - Residential silencer - Critical silencer - Flange/connection kit
Please refer to Broadcrown Sales Department for full details of these and other options

Ficha Tecnica Genset

Uploaded by

Copyright:

Available Formats

Ficha Tecnica Genset

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ficha Tecnica Genset

Uploaded by

Copyright:

Available Formats

Technical Data

John Deere 3029 TF158

CGT Stamford PI 144

RATINGS Voltage 480/277 440/254 416/240 240/138 220/127

PRIME POWER (PRP)

Definition of Ratings & Reference Conditions

Overall Dimensions & Weights - Open Set

All designs and specifications subject to change without notice

ENGINE & COOLING SYSTEM

JOHN DEERE 3029 TF158

1099 [ 159 ] 12.4 [ 3.3] 9.6 [ 2.5 ] 6.7 [ 1.8 ]

0.060 [ 127] 0.153 [ 325] 505 [ 941]

28 [ 1594] 6.0 [ 342] 12 1 X 643 660

CGT STAMFORD PI 144

STANDARD CONTROL SYSTEM

BC 7210 Digital Auto Start

CONTROL SYSTEM OPTIONS

All designs and specifications subject to change without notice

OPTIONAL ACOUSTIC ENCLOSURE

Additional Weight kg [lbs] [

Fuel Tank Capacity Litres [US gal] Integral Bunded

Single Point Lift

KEY MECHANICAL OPTIONS (Open Set)

Exhaust System : - Residential silencer - Critical silencer - Flange/connection kit

All designs and specifications subject to change without notice

You might also like