Dual Fuel Waste Vegetable Oil Burner Brochure
Dual Fuel Waste Vegetable Oil Burner Brochure
Dual Fuel Waste Vegetable Oil Burner Brochure
options
Gas / Oil Burner (left), Control Panel (above), Oil Pre-heater Assembly (below)
www.inov8-intl.com 877-684-6688
INOV8
Natural or propane gas #2 Fuel oil or any petroleum based used oil Vegetable or fryer used oil
Multi-Fuel Burners
Uncompromised engineering specifically designed for the challenges of burning waste oils in a safe, clean and reliable manner. This new burner combines the superior quality of an Italian built gas burner with the patented features of the INOV8 design. Similar to the model S200 burner that INOV8 technology is based upon, the new G-series dual-fuel burners provide clean combustion, flexibility of fuels, low operating costs and unmatched safety. The G-series dual-fuel burners allow the user to switch between fuels and automatically revert back to natural or propane gas should the used oil supply run out. The burners also provide all the safety features INOV8 customers have trusted for years, such as: 90 second prepurge, 10 second trial for ignition, three-second fuel shutoff, seven electronic checks, UV sensor, main flame trial-for-ignition. This burner can be used on furnaces, boilers, hot water heaters and waste water evaporators providing a reliable fuel backup. Fuel options include:
Burns gas or oil at the same time (half BTU rates of each fuel) Burns difficult bi-products such as water laden coolant oil or glycerin (when used in combination with gas)
Specifications
Additional Specifications:
Manifold Gas Pressure: .71 to 3.0 Oil consumption per US gallon: .84 to 7.2 GPH Compressed air requirement: 2 cfm @ 35 psig Motor Ratings: 120 v 60 Hz 2.2 amp (G200 & G400) or 4.3 amp (G750 & G900) Motor RPM: 3250 Gas train included: Maxitrol inlet pressure regulator, two stage Honeywell, & ASCO two-way solenoid low pressure valve. Tested & Listed by ETL to UL296A, CSA B140.0, ANSI Z21.17* / CSA 2.7-M98 Domestic Gas Conversion Burner, and AEI, CSA C22.2 #3* AEI
Standard equipment includes: oil pre-heater assembly with air & oil pressure gauges and regulators; control panel that includes Fireye Combustion Control, PLC control, hour meter, operating lights and fuel selection switch; and a pump assembly.
INOV8 International, Inc., 430 Nelson Place, La Crosse, WI 54601 Toll Free: 877-684-6688 Local: 608-785-2879 Fax: 608-785-2868 www.inov8-intl.com
INOV8 Evaporators
Eliminate wastewater disposal costs along with your waste oils and high energy costs. The evaporators come with controls for safe operation, provide flexibility of fuels, and fully automatic method of eliminating waste waters.