Orchid Pests and Diseases by Sue Bottom
Orchid Pests and Diseases by Sue Bottom
Orchid Pests and Diseases by Sue Bottom
Scale
Symptoms: Scale are sucking insects that attach to and feed on the underside of leaves, in leaf axils, on pseudobulbs and on rhizomes. They often are hidden under old leaves and pseudobulb sheaths. Severe infestations cause chlorotic areas to appear on the leaves and plant surfaces which will yellow and may darken and can cause the leaf to drop prematurely. Treatment: If there are only a few scale, use a Q tip dipped in isopropyl alcohol or toothbrush dipped in a pesticide like Malathion, Orthene or Safer Soap (used per label instructions) to physically remove scale. For more severe infestations, apply the pesticide at the crawler stage and repeat the application 2 weeks later. Be sure to spray all plant surfaces, particularly the undersides of leaves and leaf axils. Prevention: Remove old leaf and flower sheaths to eliminate scale hiding places and allow easy inspection. Check new plants carefully before adding to the growing area.
Mealybugs
Symptoms: Mealybugs are sucking insects that attack any part of the plant but tend to stay tucked away at the junction of leaf and stem. Severe infestations cause chlorotic areas to appear on the leaves, which may darken, causing the leaf to yellow and drop prematurely. Treatment: If there are only a few mealybugs, use a Q tip dipped in isopropyl alcohol or toothbrush dipped in a pesticide like Malathion, Orthene or Safer Soap (used per label instructions) to physically remove the mealybugs. For more severe infestations, apply the pesticide and repeat the application 2 weeks later. Be sure to spray all plant surfaces, particularly the undersides of leaves and leaf axils. Prevention: Remove old leaf and flower sheaths to eliminate hiding places and allow easy inspection. Check new plants carefully before adding to the growing area.
Aphids
Symptoms: Aphids are sucking insects that attack buds, flowers and new growths and transmit disease from plant to plant. Buds and flower may fail to open and leaves may have a sticky deposit. Treatment: Wash aphids away from the plant with a jet of water. Plants can be sprayed with a pesticide like Malathion, Orthene or Safer Soap using the product in accordance with label instructions. Miscellaneous: The honeydew excreted by aphids and other sucking insects is attractive to ants and is an ideal medium for sooty mold. When sooty mold is present, inspect the plants for aphids, mealybugs, scale and mites.
pictures courtesy of the American Orchid Society
Thrips
Symptoms: Thrips are very small sucking insects that feed on flowers and occasionally leaves and can transmit disease from plant to plant. Infested buds may not open and flowers may be deformed exhibiting water soaked spots. Leaves may appear pitted, stippled, silvery or bleached. Treatment: Plants and flowers can be sprayed with a pesticide like Orthene, Malathion or Safer Soap, applied in accordance with label instructions. Repeat applications will be required because thrips remain hidden on the plant or can be reintroduced to the plant from other flowers in the landscape. Control: Good sanitation will help prevent infestation as will keeping plant hosts (flowers, citrus, gardenias, eucalyptus, etc.) separate from your orchids.
Whiteflies
Symptoms: Whiteflies are small, moth-like insects that attack buds, flowers and new growth. The tell tale sign of whiteflies is a cloud of tiny white insects arising from an affected plant when it is moved or disturbed. Treatment: Plants can be sprayed with Malathion, Orthene or Safer Soap following label instructions. Repeat applications at 4 day intervals until whiteflies are no longer present. Control: Good sanitation and elimination of weeds will help prevent infestation as will keeping plant hosts separate from your orchids.
bottom picture courtesy of the American Orchid Society
Caterpillars
Symptoms: Caterpillars are the immature stage of moths and butterflies. While not common, they are voracious feeders that can do a great deal of damage to flowers and leaves in a short period of time. Treatment: Caterpillars can be physically picked off the plant and destroyed, check the underside of leaves for their presence. Bacillus thuringiensis or Bt is a naturally occurring bacteria of insects, it is a safe and natural product that can be sprayed in the growing area following label instructions. Prevention: Keep the growing area clean of free of fallen leaves and debris in which insect pests and their eggs can hide. Keep the landscape free of caterpillars.
bottom picture courtesy of the American Orchid Society
Symptoms of Anthracnose
Colletotrichum & Glomerella spp.
Symptoms: This fungal disease infects the aerial portion of the plant. The leaves are most often attacked. Leaf tips turn brown beginning at the apex and proceeding toward the base. Dark brown or light gray patches develop, sometimes as concentric rings or as numerous dark bands across the leaf. The affected area is usually sharply defined and somewhat sunken, while the remainder of the leaf appears normal. Sporing bodies develop in the infected area. Flowers develop watery, black or brown pustules which are usually raised and occur on the underside of older sepals and petals. The spots may merge and cover the entire flower.
Treatment of Anthracnose
Colletotrichum & Glomerella spp.
Treatment: Systemic fungicide like thiophanate methyl (like Cleary's 3336) or protectant fungicides like Mancozeb, following label instructions. Alternate systemic and protectant fungicide use. Prevention: Normal sanitation, good air movement, lower temperatures (if possible) and increased light may help reduce the spread of this disease. The pathogen is most active in warm weather when light is low and moisture is high.
Viruses
Symptoms Chlorotic and necrotic spots, streaks, lines and rings in the leaves. Flowers may show necrotic spots and streaks as well as color break. The virus, if present, is present in all parts of the plant. Treatment There is no treatment for a virused plant. Destroy the plant to prevent it from infecting other plants. If the plant is valuable, isolate it completely from other plants and follow precautions to prevent infecting other plants.
First picture courtesy of the American Orchid Society
Viruses
Use Sterile Cutting Tools Viruses are spread by transmitting the plant sap from one plant to another via mechanical means. The primary means by which viruses are spread from plant to plant is by improperly sterilized cutting tools. There are two ways to keep cutting tools sterilized, either use sterile single edged razor blades that are discarded after each and every use or use a hot flame to sterilize cutting tools after using the tools on a given plant. The cutting tool should be sterilized for 15 to 20 seconds with a hot flame on each side.
Viruses
Control During Repotting Viruses can be spread whenever there is mechanical transmission of sap from an infected plant to another plant, even by leaves rubbing against one another. Observe these additional controls: Latex Gloves. Wear latex gloves when handling a given plant and discard those gloves when you are done handling the plant. Your bare hands can come into contact with plant sap containing the virus and infect the next plant. Newspaper on Potting Surface. Keep the potting surface sterile. Keep a stack of newspapers handy and when repotting, place newspaper under the potting area. Upon completion, wrap up the newspaper, gloves and other detritus and discard them before touching the next plant.
Viruses
Disinfect your Pots Prior to Use Make sure your pots are sterile. Disinfection of Plastic Pots Plastic pots can be disinfected by first washing them with soap to remove residual organic matter, then soaking them for an hour in a 20% bleach solution, then soaking them for an hour in Physan mixed per label instructions. Disinfection of Clay Pots Clay pots are porous and cannot be sterilized against viruses by using bleach and Physan alone. Follow the normal disinfection routine for plastic pots above and then bake them in the oven at 350oF for an hour to kill any residual virus.
Viruses
Control During Routine Activities Viruses can be spread whenever there is mechanical transmission of sap from an infected plant to another plant, even by leaves rubbing against one another. Observe these additional controls: Cutting Inflorescences. Use a sterile tool to cut each inflorescence from the plant. The easiest way to do this is to use a sterile, single edged razor blade to remove the inflorescence and discard it after each use. If you use shears, you should flame sterilize them between each inflorescence. Removing Inflorescences by Hand. Dont do it! A virus, if present, can be unknowingly transmitted to your hand and you can infect the next plant when you touch it or remove the next dead flower bud by hand. Instead, use a sterile razor blade and discard it after each use.
Tospovirus