Dissertation Report On: "A Brief Study On Effectiveness of Channel of Distribution of Pepsi Products in Patna"
Dissertation Report On: "A Brief Study On Effectiveness of Channel of Distribution of Pepsi Products in Patna"
Dissertation Report On: "A Brief Study On Effectiveness of Channel of Distribution of Pepsi Products in Patna"
DECLARATION
I, Danish Khan declaring that all the information given in this project report is true and correct as far as I know. I am also declaring that all the work in this project is done by me and not copied from anywhere.
ACKNOWLEDGEMENT
At the very outset of engaging myself in to the Project Report. I would like to express my sincere gratitude to all those who extended their not only to convey their best wishes but also to give me support on this hi-undertone path. This project could not have been completed without timely suggestion advice and co-operation of a lot of persons. I am extremely thankful and pay my gratitude to Mr. Prabir Guha (Head Marketing Faculty) Amity Kolkata for his valuable guidance and support on completion of this project in its presently . I also acknowledge with a deep sense of reverence, my gratitude towards my parents and member of my family, who has always supported me morally as well as economically. At last but not least gratitude goes to all of my friends who directly or indirectly helped me to complete this project report.
CONTENTS
Preface Acknowledgement Title Chapter 1. Introduction to the Study Objective of the Study Importance and relevance of the Study Scope of the Study Methodology used in the study Limitation of the study Chapter 2. Introduction of the Soft Drinks in India History of Soft Drinks in India History of Pepsi Production Process Product Manufactured and Main Consumer Chapter 3. Chapter 4. Chapter 5. A Theoretical frame work of Channel of distribution Channel of distribution of Pepsi Conclusion and Suggestions
Questionnaire
CHAPTER 1.
INTRODUCTION TO THE STUDY
Objective Of The Study Importance And Relevance Of The Study Scope Of The Study Methodology Used In The Study Limitation Of The Study
Pepsi company has pumped in Rs. 300 crores ($ 95 million) as fresh capital and has recently received permission from the foreign investment board in Rs. 300 crores ($95 million) more. The investment phase will continue and could add unto Rs. 700 crores over the next three years. The figure is not cast in stone if volume exceeds according to expectation. They will increase capital expenditure. Apart from these things there is an expression which can not verify easily that is Pepsi has made qualitative gains. The foremost is its image from being perennially seen as a loosing company its now got the image of being a winner. This major turn around is not small achievement considering that since it was established in 1989 taking the hard ship route prior to liberalization and weighed down by export commitments. Pepsi has won more battles than it has lost. In April 1993 Voltas and Punjab Argos stakes were bought over converting Pepsi foods from a three way joint venture to be a fully owned subsidiary week bottlers who did not have the financial capacities were given massive support in the form in interest free loans to upgrade their operating capacity . But the strategy which has proved to be winner was the position, Pepsi decided to take in Company Owned Bottling Operation (COBO). For this another subsidiary PepsiCo. India holding was set up as an investment vehicle, capitalized 95 million dollar. Within a year 1994 Pepsi has bought over 5 bottlers including dukes in Mumbai, which was running in Maharastra which has been bought over from Voltas high speed imported lines with a speed of 600 bottles per minute was installed in Delhi. Pepsi has a strong franchisee in the Jaipurias of Pearl drinks. Pepsi is setting up a new plant at Jaipur.
In interview schedule I used multiple choice question and ranking system questions.
CHAPTER-2
INTRODUCTION TO THE SOFT DRINK IN INDIA
History Of The Soft Drink In India History Of Pepsi Production Process Product Manufacturing And Main Consumers
HISTORY OF PEPSI
PepsiCo is a USA based company having its head quarters at New York with the net worth of $30-40 million. The average sales of the company are approx 90 million bottles per month. Pepsi made it first international move in Russia in 1959. During the Khrushchev era, within 32 years Pepsi emerged as the biggest competitor for Coca Cola. Pepsi is available in 155 countries. In any soft drink, on the globe Pepsi food is one of the largest soft drink companies in the world with its headquarters in New York. It was invented by Pharmacist Culab D. Baradham in 1898 to cure the disease Dyspepsia. It is from this word that its name was related to Pepsi. Soon it entered the American market as soft drink, which at that time mostly dominated by Coca Cola, but soon Pepsi able to dominate the Cola market, and there after it never looked back. Pepsi and Coca Cola are engaged in ferocious cola war that has taken the whole world by storm. Pepsi entered the Indian soft drink in Kanpur in 1988 and began its production in May 1990 and soon it was giving the local contenders run for their money in soft drink market. It comes out with dazzling marketing innovation that rocked the cola market, like selling the product through function Pepsi outlets. Its advertisement agency was Hindustan Thomson Association (HTA). Its advertisement budget for 1995-1996 was valued at Rs. 24 crores which is likely to be increased manifold in coming years. Pepsi food is one of the largest and best foreign investments in India. Till today it has invested Rs. 500 crores in India to develop the local market. Pepsi has distributed exclusive franchises in India to bottle its total product. There are 28 bottling plant of Pepsi in India. Some are directly controlled by Pepsi and rest is under various franchisees. Pepsi stands 51st position among the fortune 500 companies of the world. Its total capital is approx $3000 crores and total sales annually is worth $37 crores. Its total profit
PRODUCTION PROCESS
The process of manufacture of Aerated water (soft drink) like Pepsi brand product is divided into mainly five parts such as 1. Water Treatment 2. Syrup Making 3. Bottle Washing 4. Filling 5. Testing of Product
(1) Water Treatment: - Water treatment is very essential in soft drinks plants as
the nature and quality of water varies from place to place. To set uniform and standard water the process of treatment is carried on. The water taken out from bore well by the help of motor pump and pipe line are collected in storage tank where is pre chlorinated by chlorinators and by the help of pipe lines comes to treatment tank called coagulation tank where to this water solutions of different strength of bleaching powder, ferrous sulphate, hydrated lime are added through dosing pump to reduce alkalinity, hardness, kill the bacteria .The chemical are mixed by mechanical stripper and then the suspend mattress settle down as sludge and clear water passes to retention tank. From this tank, the water passes through sand filter containing fine sand and pebbles and carbon filter containing granular carbon and finely through water polisher, micron filter, and UV lamp to ensure clear and sanitary water for use. Further water used in bottle washer and boiler need softening .for this purpose ,the water from storage tank ,after passing through two filter beds contain fine sand and granular carbon respectively comes to pass through bad resin were it is softened .this soft water is essential to use in and bottle washer to reduce scale formation inside the machines.
(2) Syrup Making:- For syrup making of particular brand, calculate quantity of
sugar water activated carbon and high flow super cell known as filter aid taken in to sugar to enter steam and also filled by a motor with agitator. Sugar syrup called raw-syrup is prepared by dissolving the sugar with continuous stirring and heating by steam supplied by fired boiler. This hot syrup by the help of pump is filtered through a filter press attached with a series of quality filter paper to separate out carbon particles. Clear hot syrup by the help of SS pipe lines passes through water P.H.E. for cooling and the then another P.H.E. circulated by glycol for further cooling. The chilled syrup comes to a mixing tank to use calculating of sugar quantity by Brix Hydrometer, concentrate added and mix thoroughly by a mechanical Stirrer fitted to the tank. This syrup is now finished syrup ready for use. The concentrate mainly, the liquid part are kept in a cold store, the temperature of finished syrup is also maintained by air-conditioner. All the containers used for syrup making are cleaned and sanitized by Soda-Bi-Crab, strong chlorine solution and hot caustic soda solution.
(3) Bottle Washing: Bottle washing is an important part in soft drink plant. The
empty durable and returnable bottle used are returned from market in plastic carats are fed to a bottle washing machine (washer). The machine has double end system with circular chain to carry the bottles. Caustic soda Tri-Sodium Phosphate, Sodium Glausonate is adding to the caustic by the supplied. The Caustic tank filled in with water heated by steam supplied by the boiler. The empty bottles enter to the hot Caustic tank in one end and after being cleaned by hot Caustic solution and finally washed with water through spray jets fitted are discharged in other end. The washed bottle proper inspections are SU 319 and SU 853 used for conveyor cleaned and smooth running of chain carrying bottles. SU 260 and SU 773 is used for bottle cleaning, shining, and mold removing.
(4) Filling: - Finished syrup and treated water lime are commixed to a dosing pump
which mixes syrup and water with ratio of 1:5 and the syrup mixed with water enters to carbonator tank to mix CO2 gas, which is preserved in cylinder for use. The cylinders are connected through CO2 manifold to tank to use requisite quantity of gas. To control CO2 pressure and temperature of liquid; we used recording control (Taylor). The syrup passed through a P.H.E. which is called itself by circulation of chilled glycol supplied chilling F-22 gas used. The syrup being chilled easily mixed with CO2 gas and enters to filter for bottling. The filter is connected with filling valves and lift cylinders. The lift cylinder functions by pressure of air supplied by an air composer. The syrup is known as beverage in this stage is filled in the cleaned bottles which are durable in nature and returnable by buyer filling machine (filter) by a counter pressure of carbon dioxide gas. After beverage filled in bottle it goes to the crowner where with the help of crown crocks the bottles are sealed (crowned) to project the carbonation, flavor, outside contamination and spoilage. The finished products are coded by a coding machine and inspected properly by inspection light while passing through the conveyor where finished product are accumulated enters to carat washer machine and it is washed moves through the conveyor where finished product are accumulated. Then the products are kept in plastic carats which are durable in nature and returnable by buyer, put on palates and sent to shipping for shipment. The entire container in contact with syrup are properly cleaned and sanitized by Soda-BiCarbonate, hot water, caustic soda solution and strong chlorine does.
(5) Testing of product:- Finally the finished syrup during bottle is tested in
laboratory to meet the parameters and also to get a standard and quality products to maintain the standard and information and uniformity in products the sugar contents and carbonation in the bottle are checked in regular intervals by Brixhydrometers, Refrectometer and pressure gauge. The dead weight tested is used to calculate pressure gauge to know the correct pressure. TA & Ph are tested by digital Ph meter. Electronic digital balanced is used to weight chemical to conduct test in lab. The purity of CO2 is checked by CO2 purity tester. The chlorine
comparators. The microbiology test of the product and water used in syrup making and production are also done to ensure that the product is free from any bacteriological contamination. To conduct the micro test hot sterilizer incubator, autoclave, pads filter membranes, media are produced and used. The Diesel generator is operated in case of electricity failure for smooth operation of the plant. To drawn electricity for the State Electricity Board the transformer is used. The steps involved in the production process are: First the fork lift supplies the empty bottles which are collected from the distributions. Then depalletising is done i.e. separating cases filled or empty bottles from the wooden planks. Uncasing is done by separating empty bottles from the cases/carats. Empty bottles are then fed into the bottle washer where stream with some chemical is used for washing. Washed bottles are then send to the filler where premix (Composed of syrup, treated water bulk CO2) is filled in it. The whole concentrated is chilled with glycol before filling and then crowning is done. The filled bottles are passed through inkjet coder for printing price and date. Then again the filled bottles are send for final light inspection and from there they are collected on a table. Lastly the filled bottles are arranged in the crates (casing) and then palletizing is done for storing it in the warehouse. PREPARATION OF SYRUP Treated water + Sugar = Flavour
PRODUCT MANUFACTURED
The product manufactured by Lumbini Beverages Pvt. Ltd. are very limited ranges as it is not independent to diversity its products. It is a unit of Pepsi food Pvt. Ltd. which supplies concentrates for drinks. They are:Products Pepsi Mirinda Mirinda Mirinda 7 Up Mountain Dew Slice Lehar soda Pet Pet Can Aquafina (Mineral Water) Quantity 300 ml, 200ml 300 ml, 200ml 300 ml, 200ml 300 ml, 200ml 300 ml, 200ml 300 ml, 200ml 300 ml 300 ml 1.5 lt. 2 lt. 330 ml 1 lt. Colour Brunt sugar Sun-set Tetrazine Tetrazine Colorless Colorless Sunset Tetrazine Brunt sugar Brunt sugar Brunt sugar Colorless Flavour Cola Orange Lime Mango Lemon Lemon Mango Lemon Cola Cola Cola White
CONSUMERS
The main consumers of these products naturally are youth. Besides the direct consumer it is also used for the some purpose of providing it to the mass by hoteliers, restaurant owners and various other soft drink peddlers. These products are the choice of the new generation. Thus it can be said that it is a product of mass consumption.
CHAPTER 3.
The channel of distribution is a structure which organized and presents a choice among alternative channels of distribution of the different marketing situations faced by retailers, whole sellers and producers with in the structure. It may be considered as a series of function which must be performed in order to make producers efficiency. To bearing maximum profits of all institutions concerned a channel of distribution should be treated as a unit of total system of action. The activities of the manufacturer need to be coordinated with these middlemen used in the distribution of given product. The important of middlemen in channel of distributional can be over emphasized. It is that who1. Collects concentrates the output of various producers, 2. Subdivides these into lot desired by the customers gathers various items together in the assortment wanted and 3. Disperses the assortment to consumer industrial buyers. The role of middlemen that of specialist in concentration equalization and dispersion besides he side in the creation of the time from and procession utilities.
CHANNEL DYNAMICS
Distribution channel do not stand still. New wholesaling and retailing institution emerge and new channel system evolves. There are four types of marketing channels. 1. Conventional Distribution Channel A Channel consist one or more independent wholesaler and retailers. Each is a separate business seeking to maximize its own profits even if this goal reduces profit for the system as a whole. No. of channel members has complete or substantial control over the other members. 2. Vertical Marketing Channel This is most recent marketing channel. A distribution channel system as producers, wholesaler and retailers act as unified systems. One channel member, the channel captain owns the others or franchises them or has so much power that they all cooperate. The channel captain can be the producer, the wholesaler or the retailer. 3. Horizontal Marketing Channel A distribution channel system in which two or more unrelated companies put together resources or programmes to exploit an emerging marketing opportunity. 4. Multi Channel Marketing In the past, many companies sold to single market through a single channel. Multi channel marketing occurs when a single firm uses two or more marketing channels to reach one or more customer segments.
RETAILING
Includes all the activities involved in selling goods or services directly to final consumers for personal non-business use. A retailer or retail store is any business enterprise whose sales volume comes primarily from retailing. Retailers are the last but not the least in the marketing channel through whom the eventual transfer of ownership of goods take place. The use of retailer boils down to their superior efficiency in making goods widely available and accessible to target markets. In most of the cases the retailers performs the important functions mentioned as under. 1. Information 2. Promotion 3. Negotiation 4. Ordering 5. Financing 6. Risk Taking 7. Physical Possession 8. Payment 9. Title The major types of retailer are as following:1. Specialty Store: - They sell narrow product line with deep assortment. 2. Departmental stores: - They sell several product line with each line operated as separate department managed by specialist buyers or merchandisers. 3. Super market: - They are relatively large, low cost, low margin, high volume self service operation designed to serve total needs for food, laundry and household maintenance product. 4. Convenience Store: - These are relatively small store located near residential areas, open long hours, seven days a week and carrying an united lines of high turn over convenience products at slightly higher prices. 5. Discount Store: - These sell standard merchandise at lower prices with lower margins and higher volumes. 6. Off price Retailers: - These sell the merchandise which are bought at less than regular wholesale prices and sold as less than retail. These may be of three types mentioned as under:
a) Factory orders b) Independent off price retailers c) Warehouse clubs ( Wholesale clubs )
Chapter 4.
CHANNEL OF DISTRIBUTION
Channel of Distribution
To make its products available at the right places at the right time in the market, the sales department of the company pays major attention on controlling the channels of distribution. Single type of markets channel is maintained by the company right from its pioneering stage. The nature of the channel is as follows:Company Distributors Dealers Different Outlet Owners Consumers At first the soft drinks supplied to the distributors directly. Retailers or owners of any outlet can not take the delivery from company. They have to take the products from their respective or nearest distributor. There are about 50 distributors and innumerable number of retail outlets operating with the company in its entire market areas which contains total Bihar. In all the important places of entire territory this company has its distributors. These distributors selected on the basis of assurance given by them regarding the minimum sales which they have to maintain annually. The selection is also done on the basis of the financial position and reputation of distributor in the market. As for example in appointing a distributor first engaged in soft drink business second priority is given to those people who are in cigarette selling business. Depending upon the market, each distributor in the initial stage has to deposit some security money.
The retailers are selected by the distributor fixed criteria for the selection or appointment or retailers from the side of the distributor. Any one like Panwala, Cigarettewala or any other shopkeeper can have the stall for the sale of soft drinks and they are called retailers or outlet owners. They have to give assurance to the concerning distributor for better sale and at the time of taking delivery they have to deposit the security i.e. the charges if the empty bottles with specified retailers purchasing price. The charges if the empty bottles with specified retailers purchasing price. The distributor at first has to seek the permission of sales department for the number of cases of soft drinks required by them. After getting the proper authority from sales department paying the requisite amount either cash or demand draft.
WAREHOUSING
Every company has to store its finished goods until they sold. A strong facility is necessary because production and consumption cycles rarely match. Warehousing is not a simply storing activity but a package of services that enables the smooth running of the industry. The stores must be in constant touch with the use department in order to provide uninterrupted services to the manufacture and its decision since working capital is locked up in the warehousing stores in equal to money. The stores functions can be organized in the following manner:a) To receive raw material components equipments etc. b) To meet the demand of use department by issuing the order c) Accounting the transaction properly. d) Minimizing obsolescence surplus and scrap by right identification and using correct preservation method. The company supply finished products frequently to different distributors as per the demand. Every distributor keeps a minimum stock of different products of the product line so that the uninterrupted supply could not affect. In the industrial sector service of optimization where boils down to any exercise of optimization where limited available resources are to be distributed equitably. The problem arises from the material that are in stock the form of capital cost, storage loss, pilferage obsolescence, insurance, handling, documentation etc. Services level that can be maintained and hence the concept stores in money should be understood by every body in the organization.
INVENTORY DECISION
(1) by Lumbini Beverages Pvt. Ltd. itself some are followed according to the standing instruction of Pepsi Foods Pvt. Ltd. So far as the process of branding and packaging is concerned the Lumbini Beverages Pvt. Ltd. Along with the authorized bottle in India adopt the same pattern.
(2)
Wholesaling
Wholesaling includes all the activities involved in selling goods or services to those who buy for resale or business use. Manufactures use wholesalers because wholesalers can perform function better and more cost effectively than the manufacture can. These functions are not limited to selling and promoting, buying and assortment building bulk barking, warehousing, transporting financial risk bearing dissemination of marketing information and provision of management services and consulting. Like retailers wholesaler must decide on target market, product assortment and services promotion and place. The most successful wholesalers are those who adopt their services to meet and target customers needs, recognizing that existing to add value to the channel.
(3) Retailing
Retailing includes all the activities involved in selling goods or services directly to find consumer for their personal non-business use. A retailer or retail store is any enterprise which sales volume comes primarily form retailing. All marketer retailers must prepare marketing plans that include decision on target market. So the marketing channels can be viewed as a set of interdependent organization with high potential for conflict. Then why would any business chosen to become part of channel system.
TRANSPORTATION
Transportation is life blood of business management and commerce. The purchase offices job in incomplete until and unless he ensures that the material is shipped from the vendors premises located in different areas to his organization. Purchasing the transportation is a key element in his job particularly in the context of the transportation cost. In deciding to transporting models shippers can choose from private contract and common carriers. Transport decisions must consider the complex trade off between various transportation mode and their implications for other distribution elements such as warehousing and inventory.
DISTRIBUTION OF PEPSI
Here there are four systems of distribution channels. Channel 1. Channel 2. Channel 3. Channel 4. ManufacturerConsumer ManufacturerRetailer..Consumer ManufacturerWholesaler.RetailerConsumer Manufacture.WholesalerJobberRetailer..Consumer
Channel of distribution of Lumbini Beverages Pvt. Ltd. By Lorry or Truck Distributor Dealers of customer
STUDY ON PRODUCTS
Product line is a group of product, that are closely related because they satisfy a class of needs or used together or sole to the same customer groups or marketed through the same types of outlets or fall within given price range. Lumbini Beverages Pvt. Ltd., has the following product line:
C.RATE
RATE 192 240 480 495 192 240 480 495 192 240 192 240 480 495 192 480 495 240 552 576 360 600 360 240 480 PER PCS RATE 8 10 20 55 8 10 20 55 8 10 8 10 20 55 8 20 55 10 23 48 15 25 12 10 20
STUDY ON RETAILERS
Retail Shop type I. Monopoly Retail Shop II. Mix Shop : : The shop selling only one companys Products The shop selling many companys Products
The retailers can build a great deal of goodwill for the firm. The marketing strength depends on the strengths of retail dealers. Research has conduct survey on different types of outlet like bakeries, cold drink parlor, Booth and general stores etc. According to his survey, the major reasons for selling Pepsi products are: (1) (2) (3) (4) (5) (6) (7) Brand Image Customer Demand Profit Margin Advertisement Good Quality Sales Promotion for Retailers Sales Promotion for Consumers 18% 20% 05% 30% 10% 07% 10%
BRAND PREFRENCE
Pepsi products are most popular brand but Coke products are very dear brand of consumers due to advertisement. After the collection of different views from consumer which includes, servicemen, students, and businessman and observing the sale of Pepsi products. The research has calculated the preference consumption of different Pepsi products by the people of PATNA
Brand Preference of Consumers Flavour Cola Orange Lemon Lime Mango % Consumption 49% 16% 12% 07% 17%
49%
Chapter 5.
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)
Suggestions
Lumbini Beverages Pvt. Ltd. should introduce some change in its marketing function and advertising to market more rational. The following factors to be worthy of consideration:1. A complain Register should be provided by the company to every distributor in every route so that, retailers/customers can write their problems. The complain register should be checked by consumer executive and depot in charge at time to time. 2. A clear notification should be given to teach distributor and each route agent to give cash memo (with printed number) and maintain route card for every transaction. 3. Proper care should be given the companys employees at the time of scheme close. Signature of scheme receiving on the cash memo should be taken and it should be also maintained in route card. Claim of scheme should be passed after the deeply stud y of above three points i.e. difference between opening stock and closing, signature of scheme receiving on the cash memo and sells maintained in the route card. 4. Some retailers keep other companies products in the Pepsis fridge, while is provided by the company. To check additional scheme be given in every month, in the peak seasons After the checking of Pepsis Fridge (3or 4 times in every month ) if It is found that retailer does not keep other companies products in the Pepsis Pepsi fridge the claim of scheme should be passed . Thus we can improve/increase its sell and employees activities. 5. There is no electricity problem in the whole area of Patna. For chilled soft drink, ice box which is compulsory and dredge both should be provided by the company. 6. The numbers of outlets are too much. So it is required to short the route and extra vehicles/tricycles provide in this route. 7. Facilities provided by the company should be increased. Facilities requirements should be fulfilled in all the rural and urban area properly after deeply study for various aspects or retailers by the help of company employee and depot incharge. 8. Number of tricycle can be installed at various place like public during the peal hours i.e. evening and busy roads and chowks near the town`s commercial
centers. Care should be taken to install these tricycles under a shady tree where providing relief from h eat to the prospective customers as well as the vendor. 9. All these tricycles targeted the tired and thirsty consumer or the road and other place, care should be taken that soft drinks in the ice box are always chilled and ice readily available. 10. The vendors must be taught to be polite to the consumers. 11. The vendors can also be provided with uniform by the company in order to give them visibility. 12. An appropriate name should be given to these tricycles and properly advertisement thus giving them some sort of identity. 13. In winters, as the sales from these tricycles may be very low because of seasonal factors Beverages Pvt. Ltd. should think of introducing such packs Beaver its various brands of beverages . 14. It is vital take for Lumbini Beverages Pvt. Ltd. that maintain the performance of Pepsi in future therefore performance of soft drink was very good in this year in comparison of coke. 15. Now a day with the introduction of tetra packs such as fruity, Tree Top etc. So Lumbini Beverages Pvt. Ltd. should think of introducing such packs of its various brands of beverages. 16. Lumbini beverages Pvt. Ltd. should be provided its the rural area also. 17. Coke is the only competitor of Pepsi. So we should try to keep every information about Coke i.e. prices scheme, policy etc. always it will help in Decision making. At last only this can be said that these suggestions are mot totally but even partially can be used by the Lumbini Beverages Pvt. Ltd. it would be pleasure for me and is certain that if these are carried out by management , it will helpful in establishing the Lumbini Beverages Pvt. Ltd. on a more stronger footing.
QUESTIONNAIRE
Name: - .. Address: - .. ....................... Contact No: - (1) Monthly sales (in Rs.) (a) Less than 5000 (c) 10,000 to 15,000 (2) (a) 0 - 50 carets (c) 100 to 150 carets (3) Which type of outlet? (a) General Store (c) Betel Shop (4) (a) Pepsi Cola (c) Mirinda (L) (e) Slice (5) demands? (Rank them) (a) Pepsi (c) Others (6) Do you know about all flavours pack (size) and respective wholesale price Pepsi soft drinks. (a) Yes (7) (a) 0 - 50 carets (c) 100 to 150 carets (8) (a) Very Good (c) Bad (b) No (b) 50 to 100 carets (d) 150 to 200 carets (b) Good (d) Worse Which companys soft drink is demanded most? (b) Coca Cola (b) Grocery (d) Sweet Shop (b) Mirinda (O) (d) 7Up (f) Mountain Dew (b) Between 5000 to 10,000 (d) Above 15,000 (b) 50 to 100 carets (d) 150 to 200 carets
When a customer comes to your shop which brand of soft drinks does he/she
(9)
What is the frequency of the visit of Pepsi executive? (a) Daily (c) Weekly (10) Which factors affect the sale most? (a) Advertisement (c) Presence (e) Price (11) (a) Pepsi (c) Both (12) (a) Highly satisfactory (c) Less satisfactory (13) (14) (15) etc. (a) Yes (b) Scheme (d) Taste (f) Others (b) Coca Cola (d) Own (b) satisfactory (d) Not satisfactory (b) No (b) Alternate Day (d) Fortnightly
Have you been provided with sign board/display rack by Coke Company? Have you any type of dissatisfaction regarding the product. It yes then why? Please give any suggestion for improvement regarding distribution, brand, bottling
... (16) What is your opinion about Pepsi products? Thank You Place:- Date:- Surveyed by
ANNEXURE