How to Secure Your Wireless (Wi-Fi) Home Network

Learn how you can secure your wireless network fin simple steps. You can prevent hackers from intercepting your Wi-Fi network and also avoid casual users from using your wireless broadband connection. Ads by Google Clinical Research Degree www.liverpool.ohecampus.com Study MSc Clinical Research & Widen Your Prospects With 100% Support! This article describes how you can secure your Wireless Network from hackers and youll also learn about free tools that people generally use to intercept your Wi-Fi signals. Wireless Networking (Wi-Fi) has made it so easy for you to use the computer, portable media player, mobile phones, video game consoles, and other wireless devices anywhere in the house without the clutter of cables. With traditional wired networks, it is extremely difficult for someone to steal your bandwidth but the big problem with wireless signals is that others can access the Internet using your broadband connection even while they are in a neighboring building or sitting in a car thats parked outside your apartment. This practice, also known as piggybacking, is bad for three reasons:

It will increase your monthly Internet bill especially when you have to pay per byte of data transfer. It will decrease your Internet access speed since you are now sharing the same internet connection with other users. It can create a security hazard* as others may hack your computers and access your personal files through your own wireless network.

[*] What do the bad guys use - There have been quite a few instances where innocent Internet users have been arrested for sending hate emails when in reality, their email accounts where hacked though the unsecured Wi-Fi networks that they had at home. Wireshark is a free packet sniffing tool for Linux, Mac and Windows that can scan traffic flowing though a wireless network including cookies, forms and other HTTP requests.

How to Secure Your Wireless Network

The good news is that it is not very hard to make your wireless network secure, which will both prevent others from stealing your internet and will also prevent hackers from taking control of your computers through your own wireless network. Here a few simple things that you should to secure your wireless network:

Step 1. Open your router settings page

First, you need to know how to access your wireless routers settings. Usually you can do this by typing in 192.168.1.1 into your web browser, and then enter the correct user name and password for the router. This is different for each router, so first check your routers user manual. You can also use Google to find the manuals for most routers online in case you lost the printed manual that came with your router purchase. For your reference, here are direct links to the manufacturers site of some popular router brands Linksys, Cisco, Netgear, Apple AirPort, SMC, D-Link, Buffalo, TP-LINK, 3Com, Belkin.

Step 2. Create a unique password on your router

Once you have logged into your router, the first thing you should do to secure your network is to change the default password* of the router to something more secure. This will prevent others from accessing the router and you can easily maintain the security settings that you want. You can change the password from the Administration settings on your routers settings page. The default values are generally admin / password. [*] What do the bad guys use - This is a public database of default usernames and passwords of wireless routers, modems, switches and other networking equipment. For instance, anyone can easily make out from the database that the factory-default settings for Linksys equipment can be accessed by using admin for both username and password fields.

Step 3. Change your Networks SSID name

The SSID (or Wireless Network Name) of your Wireless Router is usually pre-defined as default or is set as the brand name of the router (e.g., linksys). Although this will not make your network inherently* more secure, changing the SSID name of your network is a good idea as it will make it more obvious for others to know which network they are connecting to. This setting is usually under the basic wireless settings in your routers settings page. Once this is set, you will always be sure that you are connecting to the correct Wireless network even if there are multiple wireless networks in your area. Dont use your name, home address or other personal information in the SSID name. Also see: Change Network Name to Prevent Wi-Fi Theft [*] What do the bad guys use - Wi-Fi scanning tools like inSSIDer (Windows) and Kismet (Mac, Linux) are free and they will allow anyone to find all the available Wireless Networks in an area even if the routers are not broadcasting their SSID name.

Step 4. Enable Network Encryption

In order to prevent other computers in the area from using your internet connection, you need to encrypt your wireless signals. There are several encryption methods for wireless settings, including WEP, WPA (WPAPersonal), and WPA2 (Wi-Fi Protected Access version 2). WEP is basic encryption and therefore least secure (i.e., it can be easily cracked*, but is compatible with a wide range of devices including older hardware, whereas WPA2 is the most secure but is only compatible with hardware manufactured since 2006. To enable encryption on your Wireless network, open the wireless security settings on your routers configuration page. This will usually let you select which security method you wish to choose; if you have older devices, choose WEP, otherwise go with WPA2. Enter a passphrase to access the network; make sure to set this to something that would be difficult for others to guess, and consider using a combination of letters, numbers, and special characters in the passphrase. [*] What do the bad guys use - AirCrack and coWPAtty are some free tools that allow even non-hackers to crack the WEP / WPA (PSK) keys using dictionary or brute force techniques. A video on YouTube suggests that AirCrack may be easily used to break WiFi encryption using a jail-broken iPhone or an iPod Touch.

Step 5. Filter MAC addresses

Whether you have a laptop or a Wi-Fi enabled mobile phone, all your wireless devices have a unique MAC address (this has nothing to do with an Apple Mac) just like every computer connected to the Internet has a unique IP address. For an added layer of protection, you can add the MAC addresses of all your devices to your wireless routers settings so that only the specified devices can connect to your Wi-Fi network. MAC addresses are hard-coded into your networking equipment, so one address will only let that one device on the network. It is, unfortunately, possible to spoof a MAC address*, but an attacker must first know one of the MAC addresses of the computers that are connected to your Wireless network before he can attempt spoofing. To enable MAC address filtering, first make a list of all your hardware devices that you want to connect to your wireless network**. Find their MAC addresses, and then add them to the MAC address filtering in your routers administrative settings. You can find the MAC address for your computers by opening Command Prompt and typing in ipconfig /all, which will show your MAC address beside the name Physical Address. You can find the MAC addresses of Wireless mobile phones and other portable devices under their network settings, though this will vary for each device. [*] What do the bad guys use - Someone can change the MAC address of his or her own computer and can easily connect to your network since your network allows connection from devices that have that particular MAC address. Anyone can determine the MAC

address of your device wireless using a sniffing tool like Nmap and he can then change the MAC address of his own computer using another free tool like MAC Shift.

Step 6. Reduce the Range of the Wireless Signal

If your wireless router has a high range but you are staying in a small studio apartment, you can consider decreasing the signal range by either changing the mode of your router to 802.11g (instead of 802.11n or 802.11b) or use a different wireless channel. You can also try placing the router under the bed, inside a shoe box or wrap a foil around the router antennas so that you can somewhat restrict the direction of signals. Apply the Anti-Wi-Fi Paint Researchers have developed a special Wi-Fi blocking paint that can help you stop neighbors from accessing your home network without you having to set up encryption at the router level. The paint contains chemicals that blocks radio signals by absorbing them. By coating an entire room, Wi-Fi signals cant get in and, crucially, cant get out.

Step 7. Upgrade your Routers firmware

You should check the manufacturers site occasionally to make sure that your router is running the latest firmware. You can find the existing firmware version of your router using from the routers dashboard at 192.168.*.

Connect to your Secure Wireless Network

To conclude, MAC Address filtering with WPA2 (AES) encryption (and a really complex passphrase) is probably the best way to secure your wireless network. Once you have enabled the various security settings in your wireless router, you need to add the new settings to your computers and other wireless devices so that they all can connect to the Wi-Fi network. You can select to have your computer automatically connect to this network, so you wont have to enter the SSID, passphrase and other information every time you connect to the Internet. Your wireless network will now be a lot more secure and intruders may have a tough time intercepting your Wi-Fi signals.

Who is Connected to your Wireless Network

If you are worried that an outsider may be connecting to the Internet using your Wireless network, try AirSnare its a free utility that will look for unexpected MAC addresses on your Wireless network as well as to DHCP requests. Another option is that you open your routers administration page (using the 192.168.* address) and look for the DHCP Clients

Table (its under Status > Local Network on Linksys routers). Here you will see a list of all computers and wireless devices that are connected to your home network. *It is also a good idea to turn off the router completely when you are not planning to use the computer for a longer period (like when you are out shopping). You save on electricity and the door remains 100% shut for wireless piggybackers. **If you ever want to let a new device connect to your network, you will have to find its MAC address and add it to your router. If you simple want to let a friend connect to your wireless network one time, you can remove his MAC address from the router settings when he or she leaves your place.