Scribd
Upload
103 views1 page

CAN Bus

Controller Area Network (CAN) is a vehicle bus standard that allows microcontrollers and devices in a vehicle to communicate without a host computer. CAN was originally developed in 1983 by Robert Bosch GmbH for automotive applications but is now also used in industrial automation and medical equipment. CAN uses a message-based protocol and became mandatory for all cars and light trucks sold in the US in 1996 and vehicles in the EU in 2001 and 2004 as part of their OBD-II and EOBD diagnostics standards.

Uploaded by

kuthbudeen123
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
103 views1 page

CAN Bus

Controller Area Network (CAN) is a vehicle bus standard that allows microcontrollers and devices in a vehicle to communicate without a host computer. CAN was originally developed in 1983 by Robert Bosch GmbH for automotive applications but is now also used in industrial automation and medical equipment. CAN uses a message-based protocol and became mandatory for all cars and light trucks sold in the US in 1996 and vehicles in the EU in 2001 and 2004 as part of their OBD-II and EOBD diagnostics standards.

Uploaded by

kuthbudeen123
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CAN bus - Wikipedia, the free encyclopedia

Page 1 of 1

CAN bus
From Wikipedia, the free encyclopedia

Controller Area Network (CAN or CAN bus) is a vehicle bus standard designed to allow microcontrollers and devices to communicate with each other within a vehicle without a host computer. CAN is a message-based protocol, designed specifically for automotive applications but now also used in other areas such as industrial automation and medical equipment. Development of the CAN bus started originally in 1983 at Robert Bosch GmbH.[1] The protocol was officially released in 1986 at the Society of Automotive Engineers (SAE) congress in Detroit, Michigan. The first CAN controller chips, produced by Intel and Philips, came on the market in 1987. Bosch published the CAN 2.0 specification in 1991. CAN is one of five protocols used in the OBD-II vehicle diagnostics standard. The OBD-II standard has been mandatory for all cars and light trucks sold in the United States since 1996, and the EOBD standard has been mandatory for all petrol vehicles sold in the European Union since 2001 and all diesel vehicles since 2004.[2]

Contents
1 Applications 1.1 Automotive 2 Technology 3 Data transmission 4 ID allocation 5 Bit timing 6 Layers 7 Frames 7.1 Data frame 7.1.1 Base frame format 7.1.2 Extended frame format 7.2 Remote frame 7.3 Error frame 7.4 Overload frame

http://en.wikipedia.org/wiki/CAN_bus

04/02/2012

You might also like