Console Application Tutorial A VB.NET console application uses a command line window for its user interface.

Because there is no opportunity for the user to provide inputs other than those asked for by the program, a console application is not event driven. The actions performed in the program must follow in a linear fashion, and are completely defined by the program, and thus the programmer. This procedural programming is limiting, but makes a good introduction since the complexity of the user interface is eliminated. 1. Start Microsoft Visual Studio.NET. Note that it is not listed as Visual Basic.NET. Visual Studio.NET supports other programming languages other than VB. A Start Screen is displayed to help you open new or existing VB projects.

2. Click the New Project button.

3. The New Project dialog box is shown. You select the type of project and name it here.

4. Ensure that the Visual Basic projects folder is opened, and then scroll to and click Console Application from the list of templates.

5. Enter ConsoleTut as the name of the project. All the files associated with the project will be stored in a folder as indicated in the Location text box (note this so you can find it later). Click OK to create the project.

6. The VS (Visual Studio) IDE (Integrated Development Environment) is where you build your program. You can actually create any VB program in Notepad, but the IDE provides a large number of tools that greatly simplifies the process of creating a Windows program.

7. For this tutorial, you can ignore most of the windows and tools in the IDE. The Solution Explorer in the top right corner of the IDE shows the files associated with the project. The console application template provides the required files. The Module1.vb file is the active file, and its contents are shown in the editor window.

8. The code contained within the Module1.vb file is listed between the two statements:
Module Module1

End Module

The module currently contains a single subroutine (dont worry too much about terms just yet) called Main. The code inside the Main

subroutine is automatically run when the program starts. You will add all the code for this tutorial in between the Sub Main() and End Sub statements. Program Statement and Planning: The requirements of this program are as follows: Obtain radius and height of a cylinder from the user (INPUT). Calculate the Volume and surface area of the cylinder. Calculate the radius of a sphere with the same volume. Output the three calculated values to the screen (OUTPUT).

Write out an algorithm to solve this problem (it is not much more complicated than the problem statement, but should contain a bit more detail). Tools: The console application simplifies input and output in that the user interface is essentially text based. The user types in the input, and the output is posted to the same text window. This text window is referenced in your program code by using the keyword Console. Three actions associated with the Console object enable you to receive input (ReadLine) and output (Write and WriteLine) text characters to the console window. Variables: A variable is a named location in the computers memory that stores a certain type of data (character, string of characters, integer, real number, and so on). The variable is identified in the program by a unique name.

What variables do we require in this program? A variable to hold the radius (real or integer) input by the user. A second variable to hold the cylinder height (real or integer) input by the user. A variable to hold the volume of the cylinder. A variable to hold the surface area of the cylinder. A variable to hold the radius of a sphere with equal volume. Others?

By storing each of the inputs in memory (in a variable), you can use them again and again within the program without requiring that the user re-input them. Variable Declaration: Before variables can be used to store data, they must be Declared. This reserves the appropriate amount of memory to store the value assigned to the variable. 1. In the editor window, below Sub Main() but above End Sub, type:

Note that when you type in the space after the word As, a window pops up with a long list of possible Types. Each variable is declared as a type associated with the data it will hold (text characters, integer, real number, and so on). As you continue to type, the list scrolls to match the current state of the word. Once you have type do, the Double type is highlighted. A tool tip gives information on the type.

2. Press the Enter or Tab key to complete the word. The Double variable type stores real numbers. 3. Create additional declarations for the other identified variables. Declare all as type Double.

Variable Assignment: Our first challenge is to get a number from the user and into a variable. To provide guidance to the user, you prompt him/her for the number. 1. In the editor window, below the variable declarations but above End Sub, type:

Again, note that when you type the period after Console, a list of properties and methods associated with the Console object are displayed. The Write method prints out characters to the console window but what characters? 2. Immediately after the word Write, type an open bracket and a double quote.

3. Next, type in a prompt that the user will see, asking them to input the radius. Complete the statement with a second double-quote (the characters between the quotes are written to the console window) and a closing bracket.

If you forget a quote or bracket, the integrated development environment (IDE) will recognize the error and highlight it by underlining the code with a blue wavy line.

Tip: Move the cursor over the blue line to view a tool tip on the error. 4. On the next line, enter a statement that enables the program to read input from the user. The ReadLine method accepts all characters typed in by the user prior to the Enter key being pressed. Add the following line of code immediately below the previous line.

The above line illustrates the fundamental programming concept of assignment. The equal sign tells VB to take the resulting value of the expression on the right hand side of the equal sign, and store that value in the variable located on the left side of the equal sign. This assignment is ALWAYS in this direction. The ReadLine method captures the characters typed in by the user (before they press Enter), and assigns them to the Radius variable. Why is there no blue line indicating an error in this code? 5. Place the cursor at the beginning of the first line (Module1). Press enter to add one or two blank lines at the top of the editor window. Enter the following two lines of code.

The Readline statement now shows an error. Hold the cursor over the blue line.

Since you turned on strict type checking VB can no longer attempt to change the characters returned from the console (as a string data type) into the Double data type of the Radius variable. 6. Fix the conversion error by performing an explicit conversion.

CDbl() attempts to convert the results of the expression inside the brackets into a double data type. 7. Enter the following code to obtain the cylinder height.

Note that we have used WriteLine in place of Write in the prompt for the height. Examine the console window when the program runs to see the difference between the two. The two variables radius and height now hold the numbers input by the user. Next, you write equations to calculate the volume and surface area of the cylinder. You store the results of each calculation in the variables declared at the beginning of the tutorial. The volume of a cylinder = area of the circular profile * height The area of the circular profile = PI * R^2 The surface area of the cylinder = 2 * area of circular profile + area of cylinder (tube) Area of the tube = 2 * PI * radius * height

Since the area of the circular profile is required more than once it should be stored in a variable. You calculate it once and then reuse the value.

The results of the calculation are assigned to the variable. 8. Declare a new variable for the area of the circle.

What about PI? This constant value is built into the .NET programming environment, but it is not available by default. It is stored in a Math class (library) and you direct your program to find it there as follows:

Complete the calculation an assignment.

Because we have used descriptive names it is easy to interpret the above statement. The caret symbol (^) is used to raise the preceding value to the power of the following value. 9. On the next line, calculate the volume of the cylinder and assign it to the variable declared to store this value. 10. Calculate the surface area of the cylinder and assign the value to the appropriate variable. 11. The volume of a sphere is: 4/3 * PI * Radius ^ 3. The radius of a sphere of known volume is: (3/4 * Volume / PI) ^ (1/3) We will discuss mathematical precedence in the lecture.

Output: Finally, we want to display the results in the console window. The WriteLine method appears to be the likely candidate for outputting these. If you just print out the values assigned to the variables, it would be difficult for the user to interpret (which one is which?). A better approach would be to print out an indication of what the value represents, and then the value itself. The WriteLine method enables you to create a string (group of characters) that includes the current value of one or more variables. We will look at this in more detail later, and we will use similar techniques with non-console (Windows) applications. 12.Enter the following line below the sphere radius calculation (and above End Sub). Note that the brackets around the zero are braces {}, not parentheses ().

The {0} acts as a placeholder for the value of a variable. The 0 indicates that this part of the string should be replaced by the 0th variable listed after the comma. Whoa, whats a 0th variable? In programming, lists are very common, and elements of the list are often referred to by where they appear in the list. Lists in VB.NET are always zero based, which means the index of the first item in the list is zero. Since Radius is the first variable (0th element) listed after the comma, its value replaces the {0} placeholder in the string. 13.Add two lines to output the surface area of the cylinder and the radius of an equal volume sphere. Your code should match the following:

Run the Program: You typically test a program throughout its development. Leaving the testing until you thought all the code was complete would be an invitation to disaster. Ridding small sections of the program of errors before proceeding is a requirement in all but the most trivial programs. VB.NET works differently than earlier versions of VB. The program must be compiled into an EXE program before it is run. Only then can the program be executed. VB.NET allows you to combine the two steps with a single button click, or separate the two procedures. We will build the EXE separately, and then run the EXE program. 1. Select Build > Build Solution from the main menu. You will notice some text scrolling by in the Output window at the bottom of the IDE. A report on the compiling process is generated, and any errors are reported. Hopefully, the report will indicate that the build succeeded.

The EXE file is now ready to run. 2. Click the Start button on the IDE toolbar, as shown in the following figure.

After a few seconds, the console window appears, with a prompt to enter the radius.

3. Type 4.5 and press Enter. You are now prompted for the height number. Can you see the difference between Write and WriteLine? 4. Type 7.945 and press the Enter key. The screen flashes and then disappears, what happened? There is actually nothing wrong, the program makes the calculations, and displays the output. It then recognizes that the program is over, so it closes the console window. To stop the console window from closing, you can start the program using a slightly different method. 5. Select Debug > Start Without Debugging from the main menu. 6. Enter 4.5 for radius. 7. Enter 7.945 for height. The results of the calculations are displayed and you are prompted to press any key to close the console window.

Try It: What can you do to improve the input an output of this program? Use Console.WriteLine() to print a blank line. Use Write in place of WriteLine for the second number input. Limit the display precision using format codes in the output string. Using Windows Explorer, browse to the folder where you saved the project and examine the files and folders created by this program. Run the program using the Start button, and enter an impossible value for one of the numbers (say xt6, which cannot be interpreted as a number). What happens?

End of tutorial.