Scribd
Upload
2 views3 pages

CSC509 Assisgnmnet

Osctech Company Ltd. plans to expand its banking and insurance services in Owerri, Nigeria, and seeks final-year university students to design and implement a network for its new four-story building. The network must support various departments with specific requirements for PCs, printers, VLANs, DHCP, and secure communication protocols. Students are tasked with using software tools for modeling and simulation, configuring devices, and ensuring network security and communication across all departments.

Uploaded by

dunuchiedozie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2 views3 pages

CSC509 Assisgnmnet

Osctech Company Ltd. plans to expand its banking and insurance services in Owerri, Nigeria, and seeks final-year university students to design and implement a network for its new four-story building. The network must support various departments with specific requirements for PCs, printers, VLANs, DHCP, and secure communication protocols. Students are tasked with using software tools for modeling and simulation, configuring devices, and ensuring network security and communication across all departments.

Uploaded by

dunuchiedozie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

CSC 507 ASSIGNMENT

Case Study and Requirements


Osctech Company Ltd. is a NIGERIA-owned company that deals with Banking and
Insurance. The company is intending to expand its services across the south east having
the first branch to be located in Owerri, Imo state. The company has secured a four-
story building to operate within the Owerri capital city. Therefore, the company would
like to allow sourcing the knowledge from a group of final-year students from the local
university to design and implement their company network. Assume you are among the
students to take over this role, carefully read down the requirements then model the
design and implement the network based on the company's needs. Each floor has
departments as provided in the table below.;

FIRST FLOOR
NO Department Number of PCs Number of Printers
1 Management 20 4
2 Research 20 4
3 Human Resource 20 4

SECOND FLOOR
No Department Number of PCs Number of Printers
1 Marketing 20 4
2 Accounting 20 4
3 Finance 20 4

THIRD FLOOR
No Department Number Of PCs Number of Printers
1 Logistic and Store 20 4
2 Customer Care 20 4
3 Guest Area 40 2

FOURTH FLOOR
No Department Number of PCs Number of Number of
Printers Servers
1 Administration 20 2 -
2 ICT 20 2 -
3 Server Room 2 Admin PCs - 3 (DHCP,
HTTP And
EMAIL)

 Use a software modeling tool to visualize the network topology (Use Hierarchical
Network Design
- Software Modelling Tools: MS Visio, Visual Paradigm, or Draw.io for modeling
network design.
 Use any of the following network simulation software to implement the above
topology.
- Simulation software: Cisco Packet tracer or GNS3 for design and
implementation.
 Use OSPF as the routing protocol to advertise routes.
 Each department is required to have a wireless network for the users.
 Each department except the server room will be anticipated to have around 60
users both wired and wireless users.
 Host devices in the network are required to obtain IPv4 addresses automatically.
 Devices in all the departments are required to communicate with each other.
 Create HTTP, and E-mail servers.
 All devices in the network are expected to obtain an IP address dynamically from
the dedicated DHCP servers located at the server room.
 Configure SSH in all the routers for remote login.
 Configure the basic configuration of the devices: Hostnames, Line Console and
Enable passwords, Banner messages Disable domain IP lookup, encrypt all
configured passwords.
 Each department should be in a different VLAN and subnetwork; VLANs you will
use in your case, e.g. 10, 20, 30… etc..
 Planning of IP Addresses: You have been given 192.168.10.0 as the base address
for this network. Do subnetting based on the number of hosts in every
department as provided above. Identify subnet mask, useable IP address range,
and broadcast address for each subnet.
 End Device Configurations: Configure all the end devices in the network with the
appropriate IP address based on the calculations above.
 Configure port-security: Use sticky command to obtain MAC Address and
Violation mode of the shutdown.
 Test and Verifying Network Communication.

Technologies Implemented

1. Creating a network topology using Cisco Packet Tracer.


2. Hierarchical Network Design.
3. Connecting Networking devices with correct cabling.
4. Configuring Basic device settings.
5. Creating VLANs and assigning ports VLAN numbers.
6. Subnetting and IP Addressing.
7. Configuring Inter-VLAN Routing on the Multilayer switches (Switch Virtual
Interface).
8. Configuring Dedicated DHCP Server device to provide dynamic IP allocation.
9. Configuring SSH for secure Remote access.
10. Configuring OSPF as the routing protocol.
11. Configuring switchport security or Port-Security on the switches.
12. Configuring WLAN or wireless network (Cisco Access Point).
13. Host Device Configurations.
14. Test and Verifying Network Communication.

You might also like