Telecom-, Signal and RF Relays

AXICOM

W11 Relay V23101

108-98010 Aug. 08 Rev. D ECOC: JM10

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101

Disclaimer
While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this datasheet) regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this datasheet are for reference purpose only and are subject to change without notice. Specifications are subject to change without notice.

Index
Dimensions Coil Data and operating range Relay Code Contact Data Insulation / General Data 4 6 9 10 11 2 of 13

UL 508

File No. E 111441

All specifications subject to change. Consult Tyco Electronics for latest specifications.

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101

1 pole PCB relay, non-polarized, Through Hole Type (THT) ROHS compliant (Directive 2002/95/EC) as per product date code 0401.

Features
Multi purpose relay Small size permitting high packing density 1 changeover contact (1 form C / SPDT) 200 mW and 450 mW coils 1 A and 3 A contacts High shock resistance of 30 g Ambient temperature for sensitive version up to 85 C Immersion cleanable

Typical applications
Security devices Electric door openers Duplex intercommunication systems Measurement and controls

Relay types
Non-latching, 1 coil Terminal assignments symmetrical or asymmetrical 5- or 6-pin version

All specifications subject to change. Consult Tyco Electronics for latest specifications.

3 of 13

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101 Dimensions

THT V23101-Dxxx-Xxxx mm L W H T 15.5 0.1 10.5 0.1 11.5 - 0.2 3.5 - 0.2 inch 0.610 0.004 0.413 0.004 0.453 - 0.008 0.138 - 0.008

Dimensions in mm

THT Version

Mounting hole layout

View onto the component side of the PCB (top view)

Version: 6 pins

Version: 5 pins (without pin no. 6)

All specifications subject to change. Consult Tyco Electronics for latest specifications.

4 of 13

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101 Terminal assignment

Relay top view

V23101-D0 xxx-Axxx
6 pin version with symmetrical coil assignment

V23101-D1 xxx-Axxx
5 pin version with symmetrical coil assignment

V23101-D0 xxx-Bxxx
6 pin version with asymmetrical coil assignment

V23101-D1 xxx-Bxxx
5 pin version with asymmetrical coil assignment

All specifications subject to change. Consult Tyco Electronics for latest specifications.

5 of 13

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101 Coil Data (values at 20 C)

Nominal Voltage Unom Vdc Operating voltage range Minimum Voltage Umin Vdc Maximum voltage Umax Vdc Release/ reset voltage Minimum Vdc Coil power mW Coil Resistance 15%

Ordering Information
Relay code Tyco part number

6 pin version with symmetrical coil assignment, 450 mW nom. Power consumption, AgPd+Au contacts 1.5 3 5 6 9 12 24 1.5 3 5 6 9 12 24 12 5 12 24 5 12 24 12 24 12 5 12 24 12 12 1.3 2.1 3.5 4.2 6.3 8.4 16.8 1.3 2.1 3.5 4.2 6.3 8.4 16.8 8.4 3.5 8.4 16.8 3.5 8.4 16.8 8.4 16.8 8.4 3.5 8.4 16.8 8.4 8.4 2.6 4.7 7.9 9.5 14.2 19.0 38.0 2.6 4.7 7.9 9.5 14.2 19.0 38.0 19.0 7.9 19.0 38.0 7.9 19.0 38.0 19.0 38.0 19.0 7.9 19.0 38.0 19.0 19.0 0.15 0.30 0.50 0.60 0.90 1.20 2.40 0.15 0.30 0.50 0.60 0.90 1.20 2.40 0.20 0.50 1.20 2.40 0.50 1.20 2.40 1.20 2.40 1.20 0.50 1.20 2.40 1.20 1.20 375 450 446 450 450 450 450 375 450 446 450 450 450 450 450 446 450 450 446 450 450 450 450 450 446 450 450 450 450 6 20 56 80 180 320 1280 6 20 56 80 180 320 1280 320 56 320 1280 56 320 1280 320 1280 320 56 320 1280 320 320 V23101-D0001-A201 V23101-D0002-A201 V23101-D0003-A201 V23101-D0004-A201 V23101-D0005-A201 V23101-D0006-A201 V23101-D0007-A201 V23101-D0001-B201 V23101-D0002-B201 V23101-D0003-B201 V23101-D0004-B201 V23101-D0005-B201 V23101-D0006-B201 V23101-D0007-B201 V23101-D0006-A301 V23101-D0003-B301 V23101-D0006-B301 V23101-D0007-B301 V23101-D0003-A401 V23101-D0006-A401 V23101-D0007-A401 V23101-D0006-B401 V23101-D0007-B401 V23101-D1006-A201 V23101-D1003-B201 V23101-D1006-B201 V23101-D1007-B201 V23101-D1006-A401 V23101-D1006-B401 1393779-1 1393779-3 1393779-5 1393779-8 1-1393779-1 1-1393779-3 1-1393779-8 1393779-2 1393779-4 1393779-6 1-1393779-0 1-1393779-2 1-1393779-6 2-1393779-2 4-1419172-4 1393779-7 1-1393779-7 2-1393779-1 1422028-2 1422028-3 1422028-5 1422028-4 1422028-6 4-1393779-1 4-1393779-0 4-1393779-2 1413012-1 1-1422028-2 1-1422028-3

6 pin version with asymmetrical coil assignment, 450 mW nom. Power consumption, AgPd+Au contacts

6 pin version with symmetrical coil assignment, 450 mW nom. Power consumption, AgNi contacts 6 pin version with asymmetrical coil assignment, 450 mW nom. Power consumption, AgNi contacts

6 pin version with symmetrical coil assignment, 450 mW nom. Power consumption, AgNi+Au contacts

6 pin version with asymmetrical coil assignment, 450 mW nom. Power consumption, AgNi+Au contacts

5 pin version with symmetrical coil assignment, 450 mW nom. Power consumption, AgPd+Au contacts 5 pin version with asymmetrical coil assignment, 450 mW nom. Power consumption, AgPd+Au contacts

5 pin version with symmetrical coil assignment, 450 mW nom. Power consumption, AgNi+Au contacts 5 pin version with asymmetrical coil assignment, 450 mW nom. Power consumption, AgNi+Au contacts

All specifications subject to change. Consult Tyco Electronics for latest specifications.

6 of 13

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101 Coil Data (values at 20 C)

Nominal Voltage Unom Vdc Operating voltage range Minimum Voltage Umin Vdc Maximum voltage Umax Vdc Release/ reset voltage Minimum Vdc Coil power mW Coil Resistance 15%

Ordering Information
Relay code Tyco part number

6 pin version with symmetrical coil assignment, 200 mW nom. Power consumption, AgPd+Au contacts 1.5 3 5 6 9 12 24 18 1.5 3 5 6 9 12 24 12 24 12 5 12 24 18 24 12 24 12 24 12 12 12 1.1 2.3 3.8 4.5 6.8 9.0 18.0 13.5 1.1 2.3 3.8 4.5 6.8 9.0 18.0 9.0 18.0 9.0 3.8 9.0 18.0 13.5 18.0 9.0 18.0 9.0 18.0 9.0 9.0 9.0 3.6 7.1 11.6 14.2 21.2 28.0 56.0 33.0 3.6 7.1 11.6 14.2 21.2 28.0 56.0 28.0 56.0 28.0 11.6 28.0 56.0 33.0 56.0 28.0 56.0 28.0 56.0 28.0 28.0 28.0 0.15 0.30 0.50 0.60 0.90 1.20 2.40 1.80 0.15 0.30 0.50 0.60 0.90 1.20 2.40 1.20 2.40 1.20 0.50 1.20 2.40 1.80 2.40 1.20 2.40 1.20 2.40 1.20 1.20 1.20 188 200 208 200 203 206 206 200 188 200 208 200 203 206 206 206 206 206 208 203 206 200 206 203 206 203 206 203 203 203 12 45 120 180 400 700 2800 1620 12 45 120 180 400 700 2800 700 2800 700 120 700 2800 1620 2800 700 2800 700 2800 700 700 700 V23101-D0101-A201 V23101-D0102-A201 V23101-D0103-A201 V23101-D0104-A201 V23101-D0105-A201 V23101-D0106-A201 V23101-D0107-A201 V23101-D0108-A201 V23101-D0101-B201 V23101-D0102-B201 V23101-D0103-B201 V23101-D0104-B201 V23101-D0105-B201 V23101-D0106-B201 V23101-D0107-B201 V23101-D0106-A301 V23101-D0107-A301 V23101-D0106-B301 V23101-D0103-A401 V23101-D0106-A401 V23101-D0107-A401 V23101-D0108-A401 V23101-D0107-B401 V23101-D1106-A201 V23101-D1107-A201 V23101-D1106-B201 V23101-D1107-B201 V23101-D1106-B301 V23101-D1106-A401 V23101-D1106-B401 2-1393779-2 2-1393779-4 2-1393779-6 2-1393779-8 3-1393779-0 3-1393779-2 3-1393779-5 3-1393779-9 2-1393779-3 2-1393779-5 2-1393779-7 2-1393779-9 3-1393779-1 3-1393779-3 3-1393779-8 1422037-2 3-1393779-7 3-1393779-4 1422028-7 1422028-8 1422028-9 1-1422028-1 1-1422028-0 4-1393779-3 4-1393779-6 4-1393779-4 4-1393779-7 4-1393779-5 1-1422028-4 1-1422028-5

6 pin version with asymmetrical coil assignment, 200 mW nom. Power consumption, AgPd+Au contacts

6 pin version with symmetrical coil assignment, 200 mW nom. Power consumption, AgNi contacts

6 pin version with asymmetrical coil assignment, 200 mW nom. Power consumption, AgNi contacts 6 pin version with symmetrical coil assignment, 200 mW nom. Power consumption, AgNi+Au contacts

6 pin version with asymmetrical coil assignment, 200 mW nom. Power consumption, AgNi+Au contacts 5 pin version with symmetrical coil assignment, 450 mW nom. Power consumption, AgPd+Au contacts

5 pin version with asymmetrical coil assignment, 450 mW nom. Power consumption, AgPd+Au contactsw

5 pin version with asymmetrical coil assignment, 200 mW nom. Power consumption, AgNi contacts 5 pin version with symmetrical coil assignment, 200 mW nom. Power consumption, AgNi+Au contacts 5 pin version with asymmetrical coil assignment, 200 mW nom. Power consumption, AgNi+Au contacts

All specifications subject to change. Consult Tyco Electronics for latest specifications.

7 of 13

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101 Coil Operating Range

2.6 2.4 2.2 2

200 mW coil Umax. at 0 A Umax. at 1.25 A

Unom = Umax. = Uop. min. = Urel. min. =

Coil Voltage [U/Unom]

1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100

Nominal coil voltage Upper limit of the operative range of the coil voltage (limiting voltage) Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min. Lower limit of the operative range of the coil voltage (reliable release voltage)

Unom. nominal coil voltage

Uop. min. Urel. min.

Ambient Temperature [C]

2.6 2.4 2.2 2.0

450 mW coil Umax. at 0 A Umax. at 1.25 A

Coil Voltage [U/Unom]

1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100

Unom. nominal coil voltage

Uop. min. Urel. min.

Ambient Temperature [C]

All specifications subject to change. Consult Tyco Electronics for latest specifications.

8 of 13

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101 Relay Code

V 2 3 1 0 1
Identification of the Relay W11 - 1 changeover contact Pin version D0 = Standard 6 pins D1 = 5-pin version (without pin no. 6)

Coil number Standard version 001 = 1.5 V nominal voltage 002= 3 V 003 = 5 V 004 = 6 V 005 = 9 V 006 = 12 V 007 = 24 V

Sensitive version 101 = 1.5 V nominal voltage 102= 3 V 103 = 5 V 104 = 6 V 105 = 9 V 106 = 12 V 107 = 24 V

Coil assignment A = Symmetrical B = Asymmetrical Contact / Material 201 = AgPd, gold plated 301 = AgNi 401 = AgNi, gold plated

Ordering example: V23101-D0104-B401 Small relay W11 - 1 changeover contact, standard pin version (6 pins), sensitive version, coil 6 V nominal voltage, terminal assignment B, contact material AgNi, gold plated. Note: Special designs can be carried out to customer specifications. Please contact your local representative.
All specifications subject to change. Consult Tyco Electronics for latest specifications.

9 of 13

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101 Contact Data

Number of contacts and type Contact assembly Contact material Limiting continuous current at max. ambient temperature Maximum switching current (see load limit diagram) Maximum swichting voltage Maximum switching capacity Thermoelectric potential Initial contact resistance / measuring condition: 10 mA / 20 mV Electrical endurance standard: at 24 Vdc / 1.25 A at 24 Vdc / 3 A at 120 Vac / 1.25 A at 120 Vac / 3 A at 24 Vdc / 1.25 A at 24 Vdc / 3 A at 120 Vac / 1.25 A at 120 Vac / 3 A AgPd, gold plated AgNi, gold plated 1.25 A 1.25 A 120 Vdc 125 Vac 30 W / 62.5 VA < 10 V 100 m min. 3 x 105 operations min. 1.5 x 105 operations 1 changeover contacts single contacts AgNi 3A 3A 120 Vdc 125 Vac 72 W / 360 VA < 10 V 100 m

min. 2 x 105 operations min. 4 x 105 operations

sensitive:

min. 2 x 105 operations min. 1 x 105 operations

min. 1 x 105 operations min. 3 x 105 operations

Mechanical endurance, typ

107 operations

Max. DC Load Breaking Capacity

DC Voltage [Vdc]

DC current [A]

All specifications subject to change. Consult Tyco Electronics for latest specifications.

10 of 13

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101 Insulation

Insulation resistance at 500 Vdc Dielectric test voltage (1 min) between coil and contacts between open contacts > 109 1000 Vrms 750 Vrms

High Frequency Data

Capacitance between coil and contacts between open contacts max. 10 pF max. 2 pF

General Data
Operate time at Unom typ./ max. Release time without diode in parallel, typ. / max. Release time with diode in parallel, typ. / max. Bounce time at closing contact, typ. / max. Maximum switching rate without load Ambient temperature Thermal resistance Maximum permissible coil temperature Vibration resistance (function) Shock resistance, half sinus, 11 ms Degree of protection Needle flame test Mounting position Processing information Weight (mass) Terminal coating Resistance to soldering heat 5 ms / 7 ms 3 ms / 5 ms 10 ms / 12 ms 1 ms / 2 ms NO contact 5 ms / 10 ms at NC conctact 20 operations/s -40 C ... +70 C / 85 C, standard / sensitive coil < 125 K/W 130 C 10 G, 10 to 200 Hz 30 G (function) 100 G (damage) immersion cleanable, IP 67 application time 20 s, burning time < 15 s any Ultrasonic cleaning is not recommended max. 4 g SnCu 0,7 265 C / 10 s

Packing
Tube dimensions 25 relays per tube 625 relays per box

Dimensions in mm

All specifications subject to change. Consult Tyco Electronics for latest specifications.

11 of 13

AXICOM

Telecom-, Signal and RF Relays

108-98010 Rev. D

W11 Relay V23101

IM Relays
4th generation slim line low profile polarized 2 c/o telecom signal relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G relay on the market. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV 2 / 10 s) and FCC part 68 (1,5 kV 10 / 160 s). The IM relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height.

D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV 10 / 160 s). Dimensions approx. 20 x10 mm board space and 11 mm height.

P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV 10 / 160 s). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version.

P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV 2 / 10 s) and FCC part 68 (1,5 kV 10 / 160 s). The P2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height.

W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.

FX2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV 2 / 10 s) and FCC part 68 (1,5 kV 10 / 160 s). The FX2 relay is tested according CECC/ IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.

Reed Relays
High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version.

FT2 / FU2 Relays

3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV 2 / 10 s) and FCC part 68 (1,5 kV 10 / 160 s). The FT2/FU2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height.

Cradle Relays
Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height.

FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV 10 / 160 s). The FP2 is tested according CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height.

Other Relays
We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional.

High Frequency Relays

HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics in a small package. All HF series relays are suitable for SMD soldering processes. Available as non latching or latching versions with 1 or 2 coils and a nominal coil voltage range from 3 24 V, a coil power consumption of 140 mW or 70 mW (single coil latching types). HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm. 50 W hot switching and 50 W RF power carry capability. Dimensions 14.6 x 7.3 x 10.3 mm. HF3S: High performance, high power RF relay suitable up to 3 GHz, 50 W hot switching and 150 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. HF6: High performance, high power RF relay suitable up to 6 GHz, 50 W hot switching and 50 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm.

MT2
2nd generation non polarized, non latching 2 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 150/200/300/400 and 550 mW. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV 10 / 160 s). Dimensions approx. 20 x 10 mm board space and 11 mm height.

All specifications subject to change. Consult Tyco Electronics for latest specifications.

12 of 13

Tyco Electronics Logistics AG Werk Axicom Au Seestrasse 295 CH-8804 Au-Wdenswil / Switzerland Phone +41 44 782 91 11 Fax +41 44 782 90 00 E-mail: [email protected]

Tyco Electronics Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: [email protected]

Tyco Electronics EC Trutnov s.r.o. Komenskho 821 CZ-541 01 Trutnov / Czech Republic E-mail: [email protected]

Telecom-, Signal and RF Relays

AXICOM

Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752