Product Matrix
Product Matrix
com
BCAP0001 P270 T014 2.7 1 - - 700 - 0.006 0.4 0.7 0.001 0.91 8.0 12.0 1.1 Straight Lead
BCAP0005 P270 S014 2.7 5 45 36 - 70 0.008 2.3 3.8 0.005 2.4 10.0 20.5 2.1 Straight Lead
ESHSR-0005C0-002R7
BCAP0022 P270 T01 2.7 22 - - 45 - 0.055 2.6 4.2 0.022 3.38 12.5 35.5 6.5 Straight Lead
BCAP0050 P270 S014 2.7 50 16 10 - 16 0.073 6.1 10 0.05 4.1 18.0 41.0 12.2 Straight Lead
ESHSR-0050C0-002R7
BCAP0100 P270 S074 2.7 100 12 8 - 11 0.26 10 17 0.10 4.8 22.0 46.0 21.1 Snap-In
ESHSR-0100C0-002R7
BCAP0350 E270 T11/T134 2.7 350 - - 3.2 - 0.30 21 34 0.35 5.9 33.3 61.5 60 Radial Tab
BCAP0360 P270 S184 2.7 360 3.2 2.9 - 3.4 0.75 23 38 0.36 5.1 35.0 63.0 71.4 Snap-In
ESHSR-0360C0-002R7A1
79.5 Threaded
BCAP0650 P270 K04/054 2.7 650 - - 0.8 - 1.5 54 88 0.66 4.1 60.4 160
57.86 Weldable
102 Threaded
BCAP1200 P270 K04/054 2.7 1,200 - - 0.58 - 2.7 70 110 1.22 4.7 60.4 260
80.36 Weldable
113 Threaded
BCAP1500 P270 K04/054 2.7 1,500 - - 0.47 - 3.0 84 140 1.52 5.4 60.4 280
91.28 Weldable
130 Threaded
BCAP2000 P270 K04/054 2.7 2,000 - - 0.35 - 4.2 110 170 2.03 5.6 60.4 360
108.36 Weldable
BCAP0003 P270 X014 2.7 3 70 55 - 129 0.005 1.8 2.9 0.003 2.1 8.0 19.5 1.4 Straight Lead
ESHSR-0003C0-002R7UC
BCAP0005 P270 X014 2.7 5 45 36 - 70 0.008 2.3 3.8 0.005 2.4 10.0 20.5 2.1 Straight Lead
ESHSR-0005C0-002R7UC
BCAP0025 P270 X014 2.7 25 25 16 - 27 0.049 3.7 6.1 0.025 3.7 16.0 25.5 6.8 Straight Lead
ESHSR-0025C0-002R7UC
Series BCAP0003 P300 X11/X124 3.0 3 95 62 - - 0.007 1.4 2.3 0.0038 2.7 8.0 19.5 1.4 Straight Lead
Bent Lead
BCAP0005 P300 X114 3.0 5 45 35 - - 0.012 2.2 3.6 0.0063 3.0 10.0 20.5 2.1 Straight Lead
Straight Lead
BCAP0010 P300 X11/X124 3.0 10 25 20 - - 0.025 3.4 5.5 0.0125 4.0 10.0 30.5 3.2 Bent Lead
Straight Lead
BCAP0025 P300 X11/X124 3.0 25 22 17 - - 0.055 4.4 7.2 0.0313 4.7 16.0 25.5 6.8 Bent Lead
BCAP0050 P300 X114 3.0 50 13 10 - - 0.1 7.1 11.6 0.0625 5.4 18.0 41.0 12.4 Straight Lead
Images not to scale.
maxwell.com
166 Threaded
BCAP3000 P270 K04/054 2.7 3,000 - - 0.29 - 5.2 130 210 3.04 6.7 60.4 510
144.36 Weldable
166 Threaded
BCAP3400 P270 K04/054 2.7 3,400 - - 0.29 0.22 10 130 210 3.44 7.1 60.4 513
DuraBlue® 144.36 Weldable
Series BCAP3400 P285 K04/054 2.85 3,400 - - 0.28 0.22 18 131 211 3.84 7.4 60.4 166 520 Threaded
144.36 Weldable
166 Threaded
BCAP3400 P300 K04/K054,7 3.0 3,400 - - 0.24 0.15 12 140 225 4.25 8.57 60.4 496
144.36 Weldable
PCAP0050 P230 S01 2.3 50 36 27 - - 0.076 - - 0.036 5.2 16.0 25.5 7.0 Straight Lead
PSHLR-0050C0-002R3
Pseudo- PCAP0120 P230 S01 2.3 120 27 16 - - 0.172 - - 0.088 5.8 18.0 41.0 15.0 Straight Lead
capacitor PSHLR-0120C0-002R3
PCAP0300 P230 S07 2.3 300 18 13 - - 0.96 - - 0.22 9.1 22.0 46.0 24.0 Snap-In
PSHLR-0300C0-002R3
FOOTNOTES
1. Capacitance and ESRDC measured at 25°C per Document Number “Application Note: Test 4. UL 810a maximum rated voltage may differ.
Procedures for Capacitance, ESR, Leakage Current and Self-Discharge Characterizations
of Ultracapacitors” available at www.maxwell.com. 5. Duration = 60 seconds. Not intended as an operating parameter.
2. After 72 hours at 25°C and rated voltage. Initial leakage current can be higher. 6. Maximum continuous current (BOL, Beginning of Life)
BMOD0001 P005 B02 5 1.5 < 130 < 0.005 1.2 2 0.0052 1.5 None None 100 None 23 17.5 9.5 0.0034
EMHSR-0001C5-005R0
BMOD0002 P005 B02 5 2.5 < 85 < 0.008 1.6 2.6 0.0086 1.7 None None 100 None 23 21.5 12 0.005
EMHSR-0002C5-005R0
BMOD0058 E016 B024 16 58 22 170 12 19 2.1 3.3 IEC60068-2-6 Passive 750 5,600 226.5 49.5 76 0.63
BMOD0009 P024 B02 24 9 < 145 5.0, typical - - 0.70 1.7 IEC60068-2-6 Passive 500 4,000 148 59.4 58 0.41
EMHSR-0009C0-024R0
BMOD0083 P048 B01 48 83 10 3.0 61 100 27 2.6 SAE J2380 VMS 2.0 750 2,500 418 194 126 10.3
ISO16750-3
BMOD0165 P048 C014 48 165 6.0 - 79 130 53 N/A CMS 2.0 750 2,750 418 194 179 14.2
Table 12
Telcordia
BMOD0130 P056 B034 56 130 8.1 120 61 99 57 3.1 GR-63 Passive 750 4,000 683 177 175 18
Zone 4
BMOD0094 P075 B02 75 94 13 50 48 78 73 2.9 SAE J2380 Passive 750 2,500 515 263 220 25
BMOD0010 P090 B02/C02 90 10 < 121 26, typical - - 11.2 1.7 SAE J2380 Passive 750 4,000 292 116 282.6 6.3
EMHSR-0010C0-090R0 C1/C2
BMOD0141 P064 B04 64 141 8.3 - 60 46 80 5.5 None CMS 3.1 1,500 5,600 421 293 182 14.5
BMOD0006 E160 B02/C02 160 5.8 240 25 7.0 12 21 4 IEC60068-2-6 Passive 750 5,600 367 234 79.4 5.1
BMOD0004 P240 B02 240 3.75 < 323 < 26, typical - - 30 2.2 IEC60068-2-6 Passive 750 4,000 462 176.8 224.4 13.3
EMHSR-0003C7-240R0C
FOOTNOTES
1. Capacitance and ESRDC measured at 25°C per Document Number “Application Note: Test 4. UL 810a maximum rated voltage may differ.
Procedures for Capacitance, ESR, Leakage Current and Self-Discharge Characterizations
of Ultracapacitors” available at www.maxwell.com. 5. Duration = 60 seconds. Not intended as an operating parameter.
2. After 72 hours at 25°C and rated voltage. Initial leakage current can be higher. 6. Maximum continuous current (BOL, Beginning of Life)
GEN 31-0900-12V-2T 2 External 12 7.2 / 16.2 500 0.004 16.4 18.2 900 13.0 / 5.9
GEN 31-1800-12V-2T 2 External 12 7.2 / 16.2 1,000 0.002 32.8 36.5 1,800 18.5 / 8.4
SAE 3/8”- 16UNC, UL2200
2 each
GEN 31-0900-24V-2T 2 External 24 14.4 / 27.0 300 0.004 45.6 30.4 900 16.5 / 7.5
GEN 31-0980-24V-2T 2 External 24 14.4 / 28.5 340 0.004 45.6 34.4 980 17.5 / 7.9
Group 31 /
SAE J1455, -40°F to +149°F
13” L x 6 13/16” W x 9 7/16” H
RoHS 2002/95/EC (-40°C to +65°C)
(330mm L x 173mm W x 240mm H)
ULTRA 31/900 3 Internal 12 9.5 / 16.2 500 0.004 16.4 18.2 900 13.5 / 6.2
ULTRA 31/1800 3 Internal 12 9.5 / 16.2 1,000 0.002 32.8 36.5 1,800 19.0 / 8.7
SAE 3/8”- 16UNC, N/A
3 each
ULTRA 31/900/24V 3 Internal 24 18.0 / 27.0 300 0.004 45.6 30.4 900 17.0 / 7.8
ULTRA 31/1100/24V 3 Internal 24 18.0 / 28.5 340 0.004 50.8 38.4 1,100 18.0 / 8.2
FOOTNOTES
Vmax2
1. Peak Power =
4 x ESR
½ CV2
2. Total Energy =
3,600
C(Vmax-Vmin)
3. CCA = , where T = 3 seconds
(T + C x ESR)
Images not to scale. Product dimensions and specifications are for reference only unless otherwise identified; please see the individual product datasheets for further information. Product dimensions and
specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. Products and related processes may be covered by one or more
U.S. or international patents and pending applications. Please see www.maxwell.com/patents for more information.
MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, XP, DURABLUE, NESSCAP, BOOSTCAP, D CELL and their respective designs and/or logos are either trademarks or registered trademarks
of Maxwell Technologies, Inc., and/or its affiliates, and may not be copied, imitated or used, in whole or in part, without the prior written permission Maxwell Technologies, Inc. All contents copyright © 2019 Maxwell Technologies, Inc. All rights reserved.
No portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc.