Scribd
Upload
5 views1 page

Tutorial 7

This document is a tutorial for the B. Tech. Sem. II students in Electronics & Communication Engineering, focusing on Optoelectronics-Device. It includes multiple-choice questions, descriptive questions, and calculations related to photo detectors, quantum efficiency, and photo currents. The tutorial aims to enhance understanding of various types of photo-diodes and their operational principles.

Uploaded by

mindyourownbusiness396
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views1 page

Tutorial 7

This document is a tutorial for the B. Tech. Sem. II students in Electronics & Communication Engineering, focusing on Optoelectronics-Device. It includes multiple-choice questions, descriptive questions, and calculations related to photo detectors, quantum efficiency, and photo currents. The tutorial aims to enhance understanding of various types of photo-diodes and their operational principles.

Uploaded by

mindyourownbusiness396
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Department of Electronics & Communication Engineering

(Faculty of Technology, Dharmsinh Desai University, Nadiad)


Academic Year : 2024 - 2025

TUTORIAL – 7

Subject : PHYSICS (Optoelectronics-Device )


Class : B. Tech. Sem.II (EC/IT)
h = 6.626 × 10-34 J/Hz, c = 3 × 108 m/sec, q = 1.6 × 10-19 C
Q.1 Select the most appropriate option.
(1) Which material from the following is used as a photo detector at 1.5 µm?
(a) Si, (b) SiGe, (c) InGaAs (d) None
(2) Which of the following detectors give amplified output?
(a) pn photo diode, (b) p-i-n photo diode, (c) avalanche photo diode
(3) How can the quantum efficiency of a photo diode be improved? Show with necessary
equations.
(4) State true/false with justification, “The quantum efficiency is independent of the power
level falling on the detector at a given photon energy”.
(5) State true/false with justification, “The quantum efficiency decreases as wavelength
increases.”
Q.2 Do as Directed (Descriptive Answers, Examples etc)
(1) Distinguish between a p-n diode, a p-i-n diode, and an APD. Is it possible to make these
three types of photo-diodes using the same semiconductor?
Q.3 Do as Directed (Descriptive Answers, Examples etc)
(1) A p-n photo diode has a quantum efficiency of 70% for photons of energy 1.52 × 10-19 J.
Calculate (a) the wavelength at which the diode is operating and (b) the optical power
required to achieve a photo current of 3 µA when the wavelength of incident photons is
that calculated in part (a).
(2) A p-i-n photo-diode, on an average, generates one- EHP per two incident photons at a
wavelength of 0.85 µm. Assuming all the photo-generated electrons are collected,
calculate (a) the quantum efficiency of the diode; (b) the maximum possible band gap
energy in eV of the semiconductor, assuming the incident wavelength to be a long-
wavelength cut-off and (c) the mean output photo current when the incident optical power
is 10 µW. .
(3) Photons of wavelength 0.90 um are incident on a p-n photo diode at a rate of 5 × 1010
/sec and, on an average, the electrons are collected at the terminals of the diode at the
rate of 2 × 1010 /sec. Calculate (a) the quantum efficiency and (b) reponsivity of the diode
at this wavelength.
(4) An APD has a quantum efficiency of 40% at 1.3% µm when illuminated with optical
power of 0.3 µW at this wavelength, it produces an output photo current of 6 µA
after avalanche gain. Calculate the multiplication factor of the diode.
(5) Calculate the responsivity of an ideal p-n photo diode at the following wavelengths:
(a) 0.85 µm, (b) 1.30 µ m and (c) 1.55µm

* * *

You might also like