Scribd
Upload
0 views35 pages

TME413 Mod 1

The document is a compilation of materials related to the advanced strength of materials, specifically focusing on thick cylinders, compound cylinders, and rotating disks. It acknowledges various sources used for the compilation and includes example problems and applications in engineering contexts. The content is intended to serve as a supplementary aid alongside primary and secondary texts for students in mechanical engineering.

Uploaded by

makanjuolatolulope8
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0 views35 pages

TME413 Mod 1

The document is a compilation of materials related to the advanced strength of materials, specifically focusing on thick cylinders, compound cylinders, and rotating disks. It acknowledges various sources used for the compilation and includes example problems and applications in engineering contexts. The content is intended to serve as a supplementary aid alongside primary and secondary texts for students in mechanical engineering.

Uploaded by

makanjuolatolulope8
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 35

TME 413: Advanced Strength of

Materials

Module 1: Thick cylinders, compund


cylinders, Rotating Disks

1
This material is a compilation of materials from various sources and
it is compiled not as an original material but for a comprehensive aid
to be used in conjunction with our primary (recommended) and
secondary texts.

Effort has been made to reference and state sources from where
materials were obtained.

I hereby acknowledge these sources and thank them for making


their resources available for quick use on the internet.
Professor O. Oluwole
Mechanical Engineering Department
University of Ibadan

2
http://courses.washington.edu/me354a/Thick%20Walled%20Cylinders.pdf
3
Ref. Unknown
4
Ref. Unknown
5
Ref. Unknown
6
Ref. Unknown
7
Ref. Unknown
8
Ref. Unknown
9
Ref. Unknown
Summary of stresses in thick cylinders

10
Ref. Unknown
11
Ref. Unknown
12
Ref. Unknown
Rotating cylinder or Disc
If the cylinder or disc is rotating we have the
figure below

Ref. Budynas
13
14
Ref. Budynas
15
Ref. Budynas
16
Ref. Budynas
17
Ref. Budynas
Example problems

18
Ref. Budynas
19
Ref. Budynas
20
Ref. Budynas
21
Ref. Budynas
22
Ref. Budynas
This falls under press-fits and example can be seen in
example 5.8-3 on page 30.

23
Ref. Budynas
Compound cylinders( Press Fitting)
Compound cylinder (Fig. 1) is made by press-
fitting outer cylinder on the inner cylinder. The
purpose is that to increase the pressure capacity
of the cylinder

Fig.1

www.ajol.info
24
Ref. Unknown
Compound cylinders have wide applications in
hydraulic presses, forging presses, power plants,
gas storages, chemical and nuclear plants,
military applications etc. ... These residual
stresses can be summed up with hoop stress
developed due to internal pressure to find
maximum hoop stress in all the cylinders.

www.ajol.info.>ijest
25
Ref. Unknown
26
Ref. Budynas
27
Ref. Budynas
28
Ref. Budynas
29
Ref. Budynas
30
Ref. Budynas
31
Ref. Budynas
32
Ref. Budynas
33
Ref. Budynas
34
Ref. Budynas
References
• Budynas. Advanced Strength and applied
stress analysis
• Unknown. Thick Walled cylinders

35

You might also like