0% found this document useful (0 votes)

5 views85 pages

Derby Tools

The Derby Tools and Utilities Guide version 10.16 provides comprehensive information on the tools and utilities available for Apache Derby, including setup, usage, and command references. It covers JDBC connection basics, the ij command-line tool, and optional tools for database management. The document also includes licensing information and guidelines for contributions to the project.

Uploaded by

harshrastogi2020

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

5 views85 pages

Derby Tools

Uploaded by

harshrastogi2020

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 85

Derby Tools and Utilities Guide

Version 10.16

Derby Document build:

May 18, 2022, 1:43:45 PM (PDT)
Version 10.16 Derby Tools and Utilities Guide

Contents
Copyright................................................................................................................................5
License................................................................................................................................... 6
About this guide..................................................................................................................10
Purpose of this document...................................................................................... 10
Audience................................................................................................................... 10
How this guide is organized...................................................................................10
What are the Derby tools and utilities?............................................................................12
Overview................................................................................................................... 12
Environment setup and the Derby tools..............................................................12
About Derby databases...........................................................................................12
JDBC connection basics.........................................................................................13
JDBC drivers overview........................................................................................ 13
Database connection URLs.................................................................................13
Tools and localization............................................................................................. 14
About locales....................................................................................................... 14
Database locale...................................................................................................14
Specifying an alternate codeset.......................................................................... 15
Formatting display of locale-sensitive data......................................................... 15
Using ij................................................................................................................................. 16
Starting ij.................................................................................................................. 16
Creating a database using ij.................................................................................. 17
Starting ij using properties.....................................................................................17
Getting started with ij..............................................................................................18
Connecting to a Derby database........................................................................ 18
Using ij commands.............................................................................................. 20
Running ij scripts................................................................................................. 20
ij properties reference........................................................................................................ 22
ij.connection.connectionName property............................................................... 22
ij.database property................................................................................................. 22
ij.dataSource property............................................................................................. 23
ij.exceptionTrace property...................................................................................... 24
ij.maximumDisplayWidth property......................................................................... 25
ij.outfile property......................................................................................................25
ij.password property................................................................................................25
ij.protocol property.................................................................................................. 25
ij.protocol.protocolName property......................................................................... 26
ij.showErrorCode property......................................................................................26
ij.showNoConnectionsAtStart property................................................................. 27
ij.showNoCountForSelect property........................................................................27
ij.URLCheck property.............................................................................................. 28
ij.user property......................................................................................................... 29
derby.ui.codeset property....................................................................................... 29
derby.ui.locale property.......................................................................................... 30
ij commands and errors reference....................................................................................32
ij commands............................................................................................................. 32
Conventions for ij examples................................................................................ 32
ij SQL command behavior...................................................................................32
Absolute command..................................................................................................33
After Last command................................................................................................ 33

i
Version 10.16 Derby Tools and Utilities Guide
Async command...................................................................................................... 34
Autocommit command............................................................................................ 34
Before First command.............................................................................................35
Close command....................................................................................................... 35
Commit command....................................................................................................36
Connect command...................................................................................................36
Describe command.................................................................................................. 37
Disconnect command..............................................................................................37
Driver command.......................................................................................................38
Elapsedtime command............................................................................................ 38
Execute command................................................................................................... 39
Exit command.......................................................................................................... 40
First command......................................................................................................... 40
Get Cursor command.............................................................................................. 41
Get Scroll Insensitive Cursor command............................................................... 42
Help command......................................................................................................... 44
HoldForConnection command................................................................................44
Last command..........................................................................................................44
LocalizedDisplay command.................................................................................... 45
MaximumDisplayWidth command..........................................................................45
Next command......................................................................................................... 45
NoHoldForConnection command...........................................................................46
Prepare command....................................................................................................46
Previous command.................................................................................................. 47
Protocol command...................................................................................................47
Readonly command................................................................................................. 48
Relative command................................................................................................... 48
Remove command................................................................................................... 49
Rollback command.................................................................................................. 49
Run command.......................................................................................................... 50
Set Connection command...................................................................................... 50
Show command........................................................................................................50
Wait For command.................................................................................................. 54
Syntax for comments in ij commands...................................................................55
Syntax for identifiers in ij commands................................................................... 56
Syntax for strings in ij commands........................................................................ 56
ij errors......................................................................................................................57
ERROR SQLState............................................................................................... 57
WARNING SQLState...........................................................................................57
IJ ERROR............................................................................................................57
IJ WARNING....................................................................................................... 57
JAVA ERROR......................................................................................................57
sysinfo.................................................................................................................................. 58
sysinfo example....................................................................................................... 58
Using sysinfo to check the classpath................................................................... 59
dblook................................................................................................................................... 60
Using dblook............................................................................................................ 60
dblook options......................................................................................................... 60
Generating the DDL for a database....................................................................... 61
dblook examples...................................................................................................... 62
SignatureChecker................................................................................................................ 64
Using SignatureChecker......................................................................................... 64
PlanExporter........................................................................................................................ 65
Using PlanExporter..................................................................................................65

ii
Version 10.16 Derby Tools and Utilities Guide
PlanExporter XML format........................................................................................66
PlanExporter example............................................................................................. 67
Optional tools...................................................................................................................... 69
Using the databaseMetaData optional tool........................................................... 69
Using the foreignViews optional tool.................................................................... 69
Using the luceneSupport optional tool................................................................. 70
Creating an index................................................................................................ 72
Updating an index............................................................................................... 75
Querying an index............................................................................................... 75
Dropping an index............................................................................................... 76
Listing indexes.....................................................................................................77
Using the simpleJson optional tool.......................................................................77
Using the rawDBReader optional tool................................................................... 79
Trademarks.......................................................................................................................... 83

iii
Derby Tools and Utilities Guide
Apache Software FoundationDerby Tools and Utilities GuideApache Derby

4
Derby Tools and Utilities Guide

Copyright 2004-2022 The Apache Software Foundation

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this
file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0.
Related information
License

5
Derby Tools and Utilities Guide

License
The Apache License, Version 2.0

Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use,

reproduction, and distribution as defined by Sections 1 through
9 of this document.

"Licensor" shall mean the copyright owner or entity authorized

by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all
other entities that control, are controlled by, or are under
common control with that entity. For the purposes of this
definition, "control" means (i) the power, direct or indirect,
to cause the direction or management of such entity, whether by
contract or otherwise, or (ii) ownership of fifty percent (50%)
or more of the outstanding shares, or (iii) beneficial ownership
of such entity.

"You" (or "Your") shall mean an individual or Legal Entity

exercising permissions granted by this License.

"Source" form shall mean the preferred form for making

modifications, including but not limited to software source code,
documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical

transformation or translation of a Source form, including but
not limited to compiled object code, generated documentation,
and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or

Object form, made available under the License, as indicated by a
copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or

Object form, that is based on (or derived from) the Work and
for which the editorial revisions, annotations, elaborations,
or other modifications represent, as a whole, an original work
of authorship. For the purposes of this License, Derivative
Works shall not include works that remain separable from, or
merely link (or bind by name) to the interfaces of, the Work
and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including

the original version of the Work and any modifications or
additions to that Work or Derivative Works thereof, that is
intentionally submitted to Licensor for inclusion in the Work
by the copyright owner or by an individual or Legal Entity
authorized to submit on behalf of the copyright owner. For the
purposes of this definition,
"submitted" means any form of electronic, verbal, or written
communication sent to the Licensor or its representatives,
including but not limited to communication on electronic mailing
lists, source code control systems, and issue tracking systems

6
Derby Tools and Utilities Guide
that are managed by, or on behalf of, the Licensor for the
purpose of discussing and improving the Work, but excluding
communication that is conspicuously marked or otherwise
designated in writing by the copyright owner as "Not a
Contribution."

"Contributor" shall mean Licensor and any individual or Legal

Entity on behalf of whom a Contribution has been received by
Licensor and subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions

of this License, each Contributor hereby grants to You a
perpetual, worldwide, non-exclusive, no-charge, royalty-free,
irrevocable copyright license to reproduce, prepare Derivative
Works of, publicly display, publicly perform, sublicense, and
distribute the Work and such Derivative Works in Source or
Object form.

3. Grant of Patent License. Subject to the terms and conditions of

this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have
made, use, offer to sell, sell, import, and otherwise transfer
the Work, where such license applies only to those patent claims
licensable by such Contributor that are necessarily infringed by
their Contribution(s) alone or by combination of their
Contribution(s) with the Work to which such Contribution(s) was
submitted. If You institute patent litigation against any entity
(including a cross-claim or counterclaim in a lawsuit) alleging
that the Work or a Contribution incorporated within the Work
constitutes direct or contributory patent infringement, then any
patent licenses granted to You under this License for that Work
shall terminate as of the date such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the

Work or Derivative Works thereof in any medium, with or without
modifications, and in Source or Object form, provided that You
meet the following conditions:

(a) You must give any other recipients of the Work or

Derivative Works a copy of this License; and

(b) You must cause any modified files to carry prominent notices
stating that You changed the files; and

(c) You must retain, in the Source form of any Derivative Works
that You distribute, all copyright, patent, trademark, and
attribution notices from the Source form of the Work,
excluding those notices that do not pertain to any part of
the Derivative Works; and

(d) If the Work includes a "NOTICE" text file as part of its

distribution, then any Derivative Works that You distribute
must include a readable copy of the attribution notices
contained within such NOTICE file, excluding those notices
that do not pertain to any part of the Derivative Works, in
at least one of the following places: within a NOTICE text
file distributed as part of the Derivative Works; within the
Source form or documentation, if provided along with the
Derivative Works; or, within a display generated by the
Derivative Works, if and wherever such third-party notices
normally appear. The contents of the NOTICE file are for
informational purposes only and do not modify the License.
You may add Your own attribution notices within Derivative
Works that You distribute, alongside or as an addendum to
the NOTICE text from the Work, provided that such additional
attribution notices cannot be construed as modifying the
License.

You may add Your own copyright statement to Your modifications

7
Derby Tools and Utilities Guide
and may provide additional or different license terms and
conditions for use, reproduction, or distribution of Your
modifications, or for any such Derivative Works as a whole,
provided Your use, reproduction, and distribution of the Work
otherwise complies with the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state

otherwise, any Contribution intentionally submitted for
inclusion in the Work by You to the Licensor shall be under the
terms and conditions of this License, without any additional
terms or conditions. Notwithstanding the above, nothing herein
shall supersede or modify the terms of any separate license
agreement you may have executed with Licensor regarding such
Contributions.

6. Trademarks. This License does not grant permission to use the

trade names, trademarks, service marks, or product names of the
Licensor, except as required for reasonable and customary use
in describing the origin of the Work and reproducing the content
of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or

agreed to in writing, Licensor provides the Work (and each
Contributor provides its Contributions) on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied, including, without limitation, any warranties or
conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or
FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for
determining the appropriateness of using or redistributing the
Work and assume any risks associated with Your exercise of
permissions under this License.

8. Limitation of Liability. In no event and under no legal theory,

whether in tort (including negligence), contract, or otherwise,
unless required by applicable law (such as deliberate and
grossly negligent acts) or agreed to in writing, shall any
Contributor be liable to You for damages, including any direct,
indirect, special, incidental, or consequential damages of any
character arising as a result of this License or out of the use
or inability to use the Work (including but not limited to
damages for loss of goodwill, work stoppage, computer failure or
malfunction, or any and all other commercial damages or losses),
even if such Contributor has been advised of the possibility of
such damages.

9. Accepting Warranty or Additional Liability. While redistributing

the Work or Derivative Works thereof, You may choose to offer,
and charge a fee for, acceptance of support, warranty, indemnity,
or other liability obligations and/or rights consistent with this
License. However, in accepting such obligations, You may act only
on Your own behalf and on Your sole responsibility, not on behalf
of any other Contributor, and only if You agree to indemnify,
defend, and hold each Contributor harmless for any liability
incurred by, or claims asserted against, such Contributor by
reason of your accepting any such warranty or additional
liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, attach the following

boilerplate notice, with the fields enclosed by brackets "[]"
replaced with your own identifying information. (Don't include
the brackets!) The text should be enclosed in the appropriate
comment syntax for the file format. We also recommend that a
file or class name and description of purpose be included on the
same "printed page" as the copyright notice for easier
identification within third-party archives.

8
Derby Tools and Utilities Guide
Copyright [yyyy] [name of copyright owner]

Licensed under the Apache License, Version 2.0 (the "License");

you may not use this file except in compliance with the License.
You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software

distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied. See the License for the specific language governing
permissions and limitations under the License.

9
Derby Tools and Utilities Guide

About this guide

For general information about the Derby documentation, such as a complete list of books,
conventions, and further reading, see Getting Started with Derby.
For more information about Derby, visit the Derby website at http://db.apache.org/derby.
The website provides pointers to the Derby Wiki and other resources, such as the
derby-users mailing list, where you can ask questions about issues not covered in the
documentation.

Purpose of this document

This guide describes how to use the Derby tools and utilities.
The tools and utilities covered in this guide include the following.
• ij
• sysinfo
• dblook
• SignatureChecker
• PlanExporter

Audience
The audience for this guide includes several groups.
• Developers, who might use the tools when developing applications
• System administrators, who might use the tools to run scripts that perform
administrative tasks such as backups or importing and exporting data
• End-users, who might use one of the tools to run ad-hoc queries against a database

How this guide is organized

This guide includes the following sections.
• What are the Derby tools and utilities?
Overview of the tools and utilities, and Derby and JDBC basics for new or infrequent
users.
• Using ij
How to get started with ij, a JDBC and SQL scripting tool.
• ij properties reference
Reference for ij properties.
• ij commands and errors reference
Reference for ij commands and errors.
• sysinfo
Reference information on the utility that provides information about your Derby
environment.
• dblook
Reference information for a utility that dumps the DDL of a user-specified database
to either a console or a file.
• SignatureChecker

10
Derby Tools and Utilities Guide
Reference information for a tool that identifies any SQL functions and procedures in
a database that do not follow the SQL Standard argument matching rules.
• PlanExporter
Reference information for a tool that exports query plan data for further analysis.
• Optional tools
Reference information for optional tools.

11
Derby Tools and Utilities Guide

What are the Derby tools and utilities?

The Derby tools and utilities are a set of routines supplied with Derby that are typically
used to create, inspect, and update a Derby database.
For more complete information on developing a system using Derby, see the Derby
Developer's Guide.

Overview
Derby is a database management system (DBMS), accessed by applications through the
JDBC API. Included with the product are some standalone Java tools and utilities that
make it easier to use and develop applications for Derby.
These tools and utilities include:
• ij
ij is Derby's interactive JDBC scripting tool. It is a simple utility for running scripts
against a Derby database. You can also use it interactively to run ad hoc queries.
ij provides several commands for ease in accessing a variety of JDBC features.
ij can be used in an embedded or a client/server environment.
• sysinfo
sysinfo provides information about your version of Derby and your environment.
• dblook
dblook is Derby's Data Definition Language (DDL) Generation Utility, more
informally called a schema dump tool. It is a simple utility that dumps the DDL of a
user-specified database to either a console or a file. The generated DDL can then
be used for such things as recreating all or parts of a database, viewing a subset
of a database's objects (for example, those which pertain to specific tables and
schemas), or documenting a database's schema.
• SignatureChecker
The SignatureChecker tool identifies any SQL functions and procedures in a
database that do not follow the SQL Standard argument matching rules.

Environment setup and the Derby tools

The tools ij, sysinfo, dblook, and SignatureChecker can all be used in either an
embedded or a client/server environment.
Java Platform, Standard Edition 17
All Derby tools require Java Platform, Standard Edition (Java SE) 17 or later.
Classpath
The jar file derbyrun.jar simplifies the process of setting up the CLASSPATH
environment variable to run Derby and the tools.
Adding this jar file to your classpath has the effect of putting all the Derby jar files in your
classpath.
For details on using the Derby jar files for deploying applications, see the sections on
deploying Derby applications in the Derby Developer's Guide.

12
Derby Tools and Utilities Guide

About Derby databases

A Derby database consists of platform-independent files stored in a directory that has the
same name as the database.

JDBC connection basics

Most of the Derby tools are JDBC applications. A JDBC application is one that uses the
classes in the java.sql package to interact with a DBMS.
When you work with JDBC applications, you need to know about several concepts. The
most basic is the connection. A JDBC connection is the object through which commands
are sent to the Derby engine and responses are returned to the program. Establishing a
connection to a specific database is done by specifying a appropriate database URL. The
following sections provide background information to help in understanding the Derby
database connection URL.

JDBC drivers overview

Before a JDBC application connects to a database, it must cause the proper JDBC driver
to be loaded in the Java session.
Derby provides the following JDBC drivers for use with the Derby database engine:
• org.apache.derby.jdbc.EmbeddedDriver
For embedded environments, when Derby runs in the same JVM as the application.
This is commonly referred to as the embedded drvier.
• org.apache.derby.jdbc.ClientDriver
For client/server environments that use the Derby Network Server. This is
commonly referred to as the Network Client driver.
You can use ij to connect to any database that supplies a JDBC driver. For those
databases, you would need to load the supplied JDBC driver.

Database connection URLs

A JDBC URL provides a way of identifying a database so that the appropriate driver
recognizes it and connects to it. In the Derby documentation, a JDBC URL is referred to
as a database connection URL.
After the driver is loaded, an application must specify the correct database connection
URL to connect to a specific database. The Derby database connection URL allows you
to accomplish tasks other than simply connecting.
For complete information about the database connection URL, see the Derby Reference
Manual and the Derby Developer's Guide.
A JDBC URL always starts with jdbc:. After that, the format for the database connection
URL depends on the JDBC driver.
Here is the format for the database connection URL for connecting to an existing Derby
database using the embedded driver:
• jdbc:derby:databaseName;URLAttributes
The format for the database connection URL for connecting to an existing Derby
database using the Network Client is:
• jdbc:derby://host:port/databaseName;URLAttributes
The italicized items stand for something the user fills in:

13
Derby Tools and Utilities Guide
• databaseName
The name of the database you want to connect to. The databaseName value can
be either an absolute path name or a path name relative to derby.system.home, the
system directory. The path separator in the connection URL is a forward slash (/),
even in Windows path names. The database name value cannot contain a colon
(:), except for the colon after the drive name in a Windows path name.
• URLAttributes
One or more of the supported attributes of the database connection URL, such as
upgrade=true, create=true or territory=ll_CC. For more information, see "Setting
attributes for the database connection URL" in the Derby Reference Manual.
• host
The name of the machine where the server is running. It can be the name of the
machine or the address.
• port
The port number used by the server framework
About Protocols
Officially, the portion of the database connection URL called the protocol is jdbc:,
just as http:// is a protocol in web URLs. After that, derby: is officially the
subprotocol, and anything else between jdbc:derby: and databaseName is called
the subsubprotocol. See "Syntax of database connection URLs for applications with
embedded databases" in the Derby Reference Manual for details. However, the
subprotocol and subsubprotocol are informally considered part of the protocol. When you
see references to the protocol in this manual, consider the protocol to be everything that
comes before databaseName.

Tools and localization

The Derby tools provide support for common localization features such as localized
message files and GUI, locale-appropriate formatting of data, codesets, unicode
identifiers and data, and database locales.
For general information about localizing Derby systems, see the Derby Developer's
Guide.

About locales
The Derby documentation refers to three locales.
• Java system locale
This is the locale of your machine, which is automatically detected by your JVM. For
Derby and Derby tools, the Java system locale determines the default locale.
• Database locale
This is the locale associated with your database when it is created. By default,
this is the same as the Java system locale. The database locale determines the
language of database errors.
• Tools session locale
This locale is associated with your session, when using Derby tools such as ij
or dblook. This locale determines the language of messages, as well as the
localized display format for numbers, dates, times, and timestamps. You can use
the derby.ui.locale property to specify the session locale that should be used.

14
Derby Tools and Utilities Guide

Database locale
To specify a database locale, use the territory=ll_CC attribute on the URL connection
when creating the database.
Note: You cannot modify a database's locale after the database has been created.
For information about database locales, see "Localizing Derby" in the Derby Developer's
Guide.

Specifying an alternate codeset

You can specify an alternate codeset for your tool session.
Use the derby.ui.codeset property when starting ij or dblook. This property can
be useful when working with scripts created on a different system.

Formatting display of locale-sensitive data

To display dates, timestamps, numbers, and times in the format of the ij Session locale,
use the LocalizedDisplay command.
Note: These options do not change the way Derbystores locale-sensitive data, simply
the way the tool displays the data.
The following example demonstrates the use of LocalizedDisplay in an en_US
locale:

ij> VALUES CURRENT_DATE;

1
----------
2011-05-23
1 row selected
ij> localizeddisplay on;
ij> VALUES CURRENT_DATE;
1
------------------
May 23, 2011
1 row selected

15
Derby Tools and Utilities Guide

Using ij
ij is Derby's interactive JDBC scripting tool. It is a simple utility for running scripts or
interactive queries against a Derby database.
ij is a Java application, which you start from a command window such as a Windows
command prompt or a UNIX shell. ij provides several non-SQL commands for ease in
accessing a variety of JDBC features for testing.

Starting ij
Derby provides batch and shell scripts for users in Windows and UNIX environments that
can be used to start ij.
By calling the appropriate script, you can start ij and be able to connect with a simple
command. The scripts are found in the bin directory of your Derby installation. You can
also customize the ij scripts to suit your environment.
If you are using Derby as a client/server environment, start the Network Server before
connecting to the Derby database. (See "Starting the Network Server" in the Derby
Server and Administration Guide for details.) You can start ij by running the ij scripts
for your environment. Follow the instructions in "Setting up your environment" in Getting
Started with Derby to set the DERBY_HOME and JAVA_HOME environment variables and
to add DERBY_HOME/bin to your path. Then use the following command:

ij [-p propertyFile] [inputFile]

Alternatively, set the DERBY_HOME environment variable, then use one of these
commands:

(UNIX) java [options] -jar $DERBY_HOME/lib/derbyrun.jar ij

[-p propertyFile] [inputFile]

(Windows) java [options] -jar %DERBY_HOME%\lib\derbyrun.jar ij

[-p propertyFile] [inputFile]

Note that you cannot use the -cp argument or the CLASSPATH environment variable to
set CLASSPATH variables when you are using the -jar argument to start the ij tool.
That is, if you want to run the ij tool with a custom classpath, then you cannot use the
-jar argument. Instead, you have to use the full class name to start the ij tool (java
org.apache.derby.tools.ij).
You can also run the ij by setting the CLASSPATH or MODULEPATH variables via the
setNetworkServerCP or setNetworkServerCP.bat scripts. Note that you first need
to set DERBY_HOME variable. To run ij from the CLASSPATH, type

java [options] org.apache.derby.tools.ij

[-p propertyFile] [inputFile]

To run ij from the MODULEPATH, type

(UNIX) java -p $MODULEPATH \

-m org.apache.derby.tools/org.apache.derby.tools.ij \
[options]

(Windows) java -p %MODULEPATH% ^

-m org.apache.derby.tools/org.apache.derby.tools.ij ^
[options]

The command line items are:

16
Derby Tools and Utilities Guide
• java
Start the JVM.
• options
The options that the JVM uses. You can use the -D option to set ij properties (see
Starting ij using properties) or system properties, such as Derby properties.
• propertyFile
A file you can use to set ij properties (instead of the -D option). The property file
should be in the format created by the java.tools.Properties.save methods,
which is the same format as the derby.properties file.
• inputFile
A file from which to read commands. The ij tool exits at the end of the file or an
exit command. Using an input file causes ij to print out the commands as it runs
them. If you reroute standard input, ij does not print out the commands. If you do
not supply an input file, ij reads from the standard input.
For detailed information about ij commands, see ij commands and errors reference.

Creating a database using ij

You can create a Derby database from within the ij tool.
1. To create a database with the ij tool, type the following command:

ij> connect 'jdbc:derby:testdb;create=true';

This command creates a database called testdb in the current directory,

populates the system tables, and connects to the database. You can then run any
SQL statements from the ij command line.

Starting ij using properties

You can set ij properties in any of the following ways.
• By using the -D option on the command line
• By specifying a properties file using the -p propertyfile option on the
command line
Remember: ij property names are case-sensitive, while commands are
case-insensitive.
Examples
The following examples illustrate how to use ij properties.
To start ij by using a properties file called ij.properties, use a command like the
following (with the addition of the file paths):

java -jar derbyrun.jar -p ij.properties

To start ij with an ij.maximumDisplayWidth of 1000:

java -Dij.maximumDisplayWidth=1000 -jar derbyrun.jar

To start ij with an ij.protocol of jdbc:derby: and an ij.database of sample,

use the following command:

java -Dij.protocol=jdbc:derby: -Dij.database=sample derbyrun.jar

To start ij with two named connections, using the ij.connection.connectionName

property, use a command like the following:

17
Derby Tools and Utilities Guide
java -Dij.connection.sample=jdbc:derby:sample \
-Dij.connection.History=jdbc:derby:History \
-Dderby.system.home=c:\derby\demo\databases \
-jar c:\derby\lib\derbyrun.jar

To see a list of connection names and the URLs used to connect to them, use the
following command. (If there is a currently active connection, it will appear with an
asterisk (*) after its name.)

ij version 10.16
ij(HISTORY)> show connections;
HISTORY* - jdbc:derby:History
SAMPLE - jdbc:derby:sample
* = current connection
ij(HISTORY)>

Getting started with ij

This section discusses the use of the ij tool.

Connecting to a Derby database

To connect to a Derby database, you must perform the following steps.
1. Start the JVM.
2. Load the appropriate driver.
3. Create a connection by providing a valid database connection URL.
When you use ij interactively to connect to a Derby database, you generally supply
connection information on the full database connection URL. ij automatically loads the
appropriate driver based on the syntax of the URL. The following example shows how to
connect in this way by using the Connect command and the embedded driver:

java org.apache.derby.tools.ij
ij version 10.16
ij> connect 'jdbc:derby:sample';
ij>

If the URL entered contains Network Client information, the Connect command loads
the Network Client driver:

java org.apache.derby.tools.ij
ij version 10.16
ij> connect 'jdbc:derby://localhost:1527/sample';
ij>

Note: In these and subsequent examples, the databases are created in the
derby.system.home directory. For more information on the System Directory, see the
Derby Developer's Guide.
ij provides alternate methods of specifying part or all of a connection URL: the
ij.protocol, ij.database, and ij.connection.connectionName properties.
These properties are often used when a script is being used and the database path name
or the driver name is not known until runtime. The properties can also to used to shorten
the amount of information that must be provided with the connection URL. The following
are some examples of different ways to supply the connection information:
• Supplying full connection information on the command line
Specifying one of the following properties along with a valid connection URL on the
ij command line starts ij with the connection already active. This mechanism

18
Derby Tools and Utilities Guide
is often used when running a SQL script, so that the database path name can be
specified at runtime.
• ij.database: Opens a connection using the URL provided
• ij.connection.connectionName: Used to open one or more
connections. The property can appear multiple times on the command line
with different connectionNames and the same or different URLs.
This example shows how to create the database myTours and run the script
ToursDB_schema.sql by specifying the database URL using the ij.database
property.

java -Dij.database=jdbc:derby:myTours;create=true \
org.apache.derby.tools.ij \
%DERBY_HOME%\demo\programs\toursdb\ToursDB_schema.sql
ij version 10.16
CONNECTION0* - jdbc:derby:myTours
* = current connection
ij> -- Licensed to the Apache Software Foundation (ASF) under one or
more
-- contributor license agreements. See the NOTICE file distributed
with
...output removed...
ij> CREATE TRIGGER TRIG2 AFTER DELETE ON FLIGHTS FOR EACH STATEMENT
MODE DB2SQL
INSERT INTO FLIGHTS_HISTORY (STATUS) VALUES ('INSERTED FROM TRIG2');
0 rows inserted/updated/deleted
ij>
• Defining a Protocol and using a "short form" URL
You can specify a default URL protocol and subprotocol by setting the property
ij.protocol or using the Protocol command. This allows you to make a
connection by specifying only the database name. This "short form" of the database
connection URL defaults the protocol (For more information, see About Protocols).
This example uses the Protocol command and a "short form" connection URL:

java org.apache.derby.tools.ij
ij version 10.16
ij> protocol 'jdbc:derby:';
ij> connect 'sample';
ij>
• Specifying an alternate driver
If you are using the drivers supplied by Derby, you can specify the driver names
listed in JDBC drivers overview. However, the Derby drivers are implicitly loaded
when a supported protocol is used, so specifying them is usually redundant. You
may find it useful to specify the driver if you need to reload it after you have shut
down the Derby engine and deregistered the driver.
To load a driver explicitly, use the ij command Driver or specify the JVM system
property jdbc.drivers.
The ij Driver name and connection URL
The following table summarizes the different ways to specify the driver name and
database connection URL.
Table 1. Specifying the driver name and database connection URL

19
Derby Tools and Utilities Guide

System
Action Property ij Property ij Command
Loading the None ij.connection.connectionName Protocol,
driver implicitly (plus full URL), ij.database Connect (plus
(plus full URL), ij.protocol, full URL)
ij.protocol.protocolName
(plus protocol clause in Connect
command)
Loading the None
jdbc.drivers Driver
driver explicitly
Specifying None ij.connection.connectionName, Connect
the database ij.database
connection URL

Using ij commands
The primary purpose of ij is to allow the execution of Derby SQL statements
interactively or by means of scripts.
Since SQL statements can be quite long, ij uses the semicolon to mark the end of
a statement or command. All statements and commands must be terminated with a
semicolon. If you press Return before terminating a statement or command, ij places a
continuation character (>) at the beginning of the next line.
ij uses properties, listed in ij properties reference, to simplify its use.
ij also recognizes specialized commands that provide additional features, such as the
ability to create and test cursors and prepared statements, transaction control, and more.
For complete information about ij commands, see ij commands and errors reference.
Other uses for ij
ij is a JDBC-neutral scripting tool with a small command set. It can be used to access
any JDBC driver and any database accessible through that driver.
The main benefit of a tool such as ij is that it is easy to run scripts for creating a
database schema and automating other repetitive database tasks.
In addition, ij accepts and processes SQL commands interactively for ad hoc database
access.

Running ij scripts
You can run scripts in ij in any of the following ways.
• Name an input file as a command-line argument.
For example:

java org.apache.derby.tools.ij myscript.sql

• Redirect standard input to come from a file.
For example:

java org.apache.derby.tools.ij < myscript.sql

• Use the Run command from the ij command line.
For example:

20
Derby Tools and Utilities Guide
ij> run 'myscript.sql';
Note: If you name an input file as a command-line argument or if you use the Run
command, ij echoes input from a file. If you redirect standard input to come from a file,
ij does not echo commands.
You can save output in any of the following ways:
• By redirecting output to a file:

java org.apache.derby.tools.ij myscript.sql > myoutput.txt

• By setting the ij.outfile property:

java -Dij.outfile=myoutput.txt org.apache.derby.tools.ij

myscript.sql
ij exits when you enter the Exit command or, if executing a script, when the
end of the command file is reached. When you use the Exit command, ij
automatically shuts down an embedded Derby system by issuing a connect
jdbc:derby:;shutdown=true request. It does not shut down Derby if it is running in
a server framework.

21
Derby Tools and Utilities Guide

ij properties reference
When starting up ij, you can specify properties on the command line or in a properties
file.
See Starting ij using properties for details.

ij.connection.connectionName property
The ij.connection.connectionName property creates a named connection to the
given database connection URL when ij starts up.
The property is equivalent to the Connect AS Identifier command. The database
connection URL can be of the short form if an ij.protocol is specified. This property
can be specified more than once per session, creating multiple connections. When ij
starts, it displays the names of all the connections created in this way. It also displays the
name of the current connection, if there is more than one, in the ij prompt.
Syntax

ij.connection.connectionName=databaseConnectionURL

When specified on the command line, the databaseConnectionURL should not be

enclosed in single quotes. However, if the database path contains special characters
(such as a space), it must be enclosed in double quotes.
Example
This example connects to the existing database sample and creates, then connects to,
the database anotherDB.

java -Dij.connection.sample1=jdbc:derby:sample \
-Dij.connection.anotherConn=jdbc:derby:anotherDB;create=true \
org.apache.derby.tools.ij
ij version 10.16
ANOTHERCONN* - jdbc:derby:anotherDB;create=true
SAMPLE1 - jdbc:derby:sample
* = current connection
ij(ANOTHERCONN)>

If you do not specify ij.dataSource.databaseName and get an error indicating

no database was found, you can still connect to a database by using ij's Connect
command. You should not specify the protocol (for example, jdbc:derby:) in the
connect command when using ij.dataSource.
Example
In the following example, ij connects to a database named sample using an
EmbeddedDataSource. The sample database is created if it does not already exist.

java -Dij.dataSource=org.apache.derby.jdbc.EmbeddedDataSource \
-Dij.dataSource.databaseName=sample \
-Dij.dataSource.createDatabase=create org.apache.derby.tools.ij
ij version 10.16
CONNECTION0*
* = current connection
ij>

ij.exceptionTrace={ false | true }

Example
In the following example, ij is started with the ij.exceptionTrace property set to
true.

java -Dij.exceptionTrace=true org.apache.derby.tools.ij

ij version 10.16
ij> connect 'jdbc:derby:wombat';
ERROR XJ004: Database 'wombat' not found.
SQL Exception: Database 'wombat' not found.
at
org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException(SQLExceptionFactory.jav
at
org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException(SQLExceptionFactory.jav
at
org.apache.derby.impl.jdbc.Util.generateCsSQLException(Util.java:228)
at
org.apache.derby.impl.jdbc.Util.generateCsSQLException(Util.java:223)
at
org.apache.derby.impl.jdbc.EmbedConnection.newSQLException(EmbedConnection.java:3198)
at
org.apache.derby.impl.jdbc.EmbedConnection.handleDBNotFound(EmbedConnection.java:766)
at
org.apache.derby.impl.jdbc.EmbedConnection.<init>(EmbedConnection.java:436)
at
org.apache.derby.jdbc.InternalDriver.getNewEmbedConnection(InternalDriver.java:647)
at
org.apache.derby.jdbc.InternalDriver.connect(InternalDriver.java:301)
at
org.apache.derby.jdbc.InternalDriver.connect(InternalDriver.java:932)
at
org.apache.derby.jdbc.AutoloadedDriver.connect(AutoloadedDriver.java:147)
at java.sql.DriverManager.getConnection(DriverManager.java:571)
at java.sql.DriverManager.getConnection(DriverManager.java:187)
at org.apache.derby.impl.tools.ij.ij.dynamicConnection(ij.java:1486)
at org.apache.derby.impl.tools.ij.ij.ConnectStatement(ij.java:1316)
at org.apache.derby.impl.tools.ij.ij.ijStatement(ij.java:1101)
at
org.apache.derby.impl.tools.ij.utilMain.runScriptGuts(utilMain.java:347)
at org.apache.derby.impl.tools.ij.utilMain.go(utilMain.java:245)
at org.apache.derby.impl.tools.ij.Main.go(Main.java:229)
at org.apache.derby.impl.tools.ij.Main.mainCore(Main.java:184)
at org.apache.derby.impl.tools.ij.Main.main(Main.java:75)
at org.apache.derby.tools.ij.main(ij.java:59)
at org.apache.derby.iapi.tools.run.main(run.java:53)
Caused by: ERROR XJ004: Database 'wombat' not found.
at
org.apache.derby.iapi.error.StandardException.newException(StandardException.java:290)
at
org.apache.derby.impl.jdbc.SQLExceptionFactory.wrapArgsForTransportAcrossDRDA(SQLExcep
at
org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException(SQLExceptionFactory.jav

24
Derby Tools and Utilities Guide
... 22 more
ij>

ij.maximumDisplayWidth property
The ij.maximumDisplayWidth property specifies the maximum number of characters
used to display any column.
The default value is 128. Values with display widths longer than the maximum are
truncated and terminated with an ampersand (&) character.
Syntax

ij.maximumDisplayWidth=numberOfCharacters

Example

java -Dij.maximumDisplayWidth=1000 org.apache.derby.tools.ij

See also
• MaximumDisplayWidth command

ij.outfile property
The ij.outfile property specifies a file to which the system should direct output for a
session.
Specify the file name relative to the current directory, or specify the absolute path.
Syntax

ij.outfile=fileName

Example

java -Dij.outfile=out.txt org.apache.derby.tools.ij myscript.sql

ij.password property
The ij.password property specifies the password used to make connections.
This property is used in conjunction with the ij.user property to authenticate a
connection. If authentication is not active, these properties are ignored.
Syntax

ij.password=password

Example

java -Dij.user=me -Dij.password=mine org.apache.derby.tools.ij

See also
See the Derby Security Guide for more information on Derby authentication and security.

ij.protocol property
The ij.protocol property specifies the default protocol and subprotocol portions of the
database connection URL for connections.
The Derby protocol is:

25
Derby Tools and Utilities Guide
jdbc:derby:

The property allows you to use a short form of a database name in a connection URL.
Syntax

ij.protocol=protocolForEnvironment

Example

java -Dij.protocol=jdbc:derby: org.apache.derby.tools.ij

ij version 10.16
ij> Connect 'newDB;create=true';
ij>

ij.showErrorCode={ false | true }

Example

java -Dij.showErrorCode=true -Dij.protocol=jdbc:derby: \

org.apache.derby.tools.ij
ij version 10.16
ij> Connect 'sample';
ij> VLUES 1;
ERROR 42X01: Syntax error: Encountered "VLUES" at line 1, column 1.
(errorCode = 30000)
...
ij>

26
Derby Tools and Utilities Guide
See also
See "Derby exception messages and SQL states" in the Derby Reference Manual.

ij.showNoConnectionsAtStart property
The ij.showNoConnectionsAtStart property specifies whether the connections
message should be displayed when ij is started.
The default is false; that is, a message is displayed that indicates the current
connections, if any.
Syntax

ij.showNoConnectionsAtStart={ false | true }

Example
In the following example, ij connects to a previously created database named sample
using an EmbeddedDataSource. The property ij.showNoConnectionsAtStart is
set to true in the first session of the example and to false in the second session.

java -Dij.dataSource=org.apache.derby.jdbc.EmbeddedDataSource \
-Dij.dataSource.databaseName=sample -Dij.showNoConnectionsAtStart=true \
org.apache.derby.tools.ij
ij version 10.16
ij> disconnect;
ij> exit;

java -Dij.dataSource=org.apache.derby.jdbc.EmbeddedDataSource \
-Dij.dataSource.databaseName=sample -Dij.showNoConnectionsAtStart=false \
org.apache.derby.tools.ij
ij version 10.16
CONNECTION0*
* = current connection
ij> disconnect;
ij> exit;

ij.showNoCountForSelect property
The ij.showNoCountForSelect property specifies whether to display messages
indicating the number of rows selected.
The default is false; that is, if the property is not set, select count messages are
displayed.
Syntax

ij.showNoCountForSelect={ false | true }

Example
In the following example, ij is first started with the ij.showNoCountForSelect
property set to true, then with the property set to false.

java -Dij.showNoCountForSelect=true org.apache.derby.tools.ij

ij version 10.16
ij> connect 'jdbc:derby:sample';
ij> create table t1 (c1 int);
0 rows inserted/updated/deleted
ij> insert into t1 values 1, 2, 3;
3 rows inserted/updated/deleted
ij> select * from t1;
C1
-----------

27
Derby Tools and Utilities Guide
1
2
3
ij> disconnect;
ij> exit;

java -Dij.showNoCountForSelect=false org.apache.derby.tools.ij

ij version 10.16
connect 'jdbc:derby:sample';
ij> select * from t1;
C1
-----------
1
2
3

3 rows selected
ij>

ij.URLCheck property
The ij.URLCheck property specifies whether ij should check for invalid or non-Derby
URL attributes when you are using the embedded driver.
Set this property to false to prevent ij from validating URL attributes. The default value
is true.
When the ij.URLCheck property is set to true, you are notified whenever a connection
URL contains an incorrectly specified attribute. For example, if the attribute name is
misspelled or has an incorrect case, ij prints a message.
Note: ij checks attribute values if the attribute has pre-defined values. For example,
the attribute shutdown has the pre-defined values of true or false. If you try to set
the attribute shutdown to a value other than true or false, ij displays an error. For
example:

ij> Connect 'jdbc:derby:anyDB;shutdown=rue';

ERROR XJ05B: JDBC attribute 'shutdown' has an invalid value 'rue',
valid values are '{true|false}'.
ij>

Syntax

ij.URLCheck={ false | true }

Example
By default, ij displays messages about invalid attributes:

java org.apache.derby.tools.ij
ij version 10.16
ij> connect 'mydb;uSer=naomi';
URL Attribute [uSer=naomi]
Case of the Derby attribute is incorrect.

The following command line turns off URL attribute checking in ij.

java -Dij.URLCheck=false org.apache.derby.tools.ij

ij version 10.16
ij> connect 'mydb;uSer=naomi';
ij>

Typically, you would only explicitly turn off the URL checker if you were using ij with a
non-Derby JDBC driver or database.
Notes

28
Derby Tools and Utilities Guide
The URL checker does not check the validity of properties, only database connection
URL attributes.
For a list of attributes, see "Setting attributes for the database connection URL" in the
Derby Reference Manual. Because the ij.URLCheck property is valid only with the
embedded driver, it does not apply to attributes such as securityMechanism=value,
ssl=sslMode, and the attributes related to tracing.

ij.user property
The ij.user property specifies the login name used to establish the connection.
This property is used in conjunction with the ij.password property to authenticate a
connection. If authentication is not active, these properties are ignored.
When you supply a username, you need to be aware of the database schema. When
you connect using ij.user, the default database schema applied to all SQL statements
is the same as the user ID provided, even if the schema does not exist. Use the SET
SCHEMA statement to change the default when the schema does not match the
username. Alternately, you can fully qualify the database objects referred to in the SQL
statements. If no user is specified, no SET SCHEMA statement has been issued, or SQL
statements do not include the schema name, all database objects are assumed to be
under the APP schema.
Syntax

ij.user=username

Example

java -Dij.user=me -Dij.password=mine org.apache.derby.tools.ij

ij version 10.16
ij> connect 'jdbc:derby:sampleDB';
ij> set schema finance;
ij> select * from accounts;

See also
See the Derby Security Guide for more information on Derby authentication and security.

derby.ui.codeset property
The derby.ui.codeset property specifies an alternative supported character encoding
value when you use one of the Derby tools with a language not supported by your default
system.
This property is commonly used in conjunction with the derby.ui.locale property.
Syntax

derby.ui.codeset=derbyval

where derbyval is a supported character encoding value, such as UTF8 (see the table
later in this topic).
Example
The following command runs ij using the Japanese locale
(derby.ui.locale=ja_JP) and Japanese Latin Kanji mixed encoding
(derby.ui.codeset=Cp939):

java -Dderby.ui.locale=ja_JP -Dderby.ui.codeset=Cp939 \

-Dij.protocol=jdbc:derby: org.apache.derby.tools.ij

29
Derby Tools and Utilities Guide
The following table contains a sampling of character encodings. Supported encodings
vary from product to product. For example, to see the full list of character encodings that
are supported by the Java Platform, Standard Edition 7 Software Development Kit, go to
http://docs.oracle.com/javase/7/docs/technotes/guides/intl/encoding.doc.html.
Table 2. Sample character encodings

Character Encoding Explanation

8859_1 ISO Latin-1
8859_2 ISO Latin-2
8859_7 ISO Latin/Greek
Cp1257 Windows Baltic
Cp1258 Windows Vietnamese
Cp437 PC Original
EUCJIS Japanese EUC
GB2312 GB2312-80 Simplified Chinese
JIS JIS
KSC5601 KSC5601 Korean
MacCroatian Macintosh Croatian
MacCyrillic Macintosh Cyrillic
SJIS PC and Windows Japanese
UTF8 Standard UTF-8

derby.ui.locale property
The derby.ui.locale property specifies an alternative supported locale name when
you use one of the Derby tools with a language not supported by your default system.
The locale determines the localized display format for numbers, dates, times, and
timestamps, as well as the language of the messages from the Derby tools.
This property is commonly used in conjunction with the derby.ui.codeset property.
Syntax

derby.ui.locale=derbyval

where derbyval is a supported locale name, in the form ll_CC, where ll is the two-letter
language code, and CC is the two-letter country code; for example, ja_JP.
Example
The following command runs ij using the Japanese locale
(derby.ui.locale=ja_JP) and Japanese Latin Kanji mixed encoding
(derby.ui.codeset=Cp939):

java -Dderby.ui.locale=ja_JP -Dderby.ui.codeset=Cp939 \

-Dij.protocol=jdbc:derby: org.apache.derby.tools.ij

Language codes consist of a pair of lowercase letters that conform to ISO 639-1. The
following table shows some examples.

30
Derby Tools and Utilities Guide
Table 3. Sample language codes

Language Code Description

de German
en English
es Spanish
ja Japanese

To see a full list of ISO 639 codes, go to

http://www.loc.gov/standards/iso639-2/php/code_list.php.
Country codes consist of two uppercase letters that conform to ISO 3166. The following
table shows some examples.
Table 4. Sample country codes

Country Code Description

DE Germany
US United States
ES Spain
MX Mexico
JP Japan

A copy of ISO 3166 can be found at

http://userpage.chemie.fu-berlin.de/diverse/doc/ISO_3166.html.

31
Derby Tools and Utilities Guide

ij commands and errors reference

This section describes the commands and errors within the ij tool.

ij commands
ij accepts several commands to control its use of JDBC.
It recognizes a semicolon as the end of an ij or SQL command; it treats semicolons
within SQL comments, strings, and delimited identifiers as part of those constructs, not as
the end of the command. A semicolon is required at the end of an ij or SQL statement.
All ij commands, identifiers, and keywords are case-insensitive.
Commands can span multiple lines without any special escaping for the ends of lines.
This means that if a string spans a line, the new lines will appear in the value in the
string.
ij treats any command that it does not recognize as an SQL command to be passed
to the underlying connection, so syntactic errors in ij commands will cause them to be
handed to the SQL engine and will probably result in SQL parsing errors.

Conventions for ij examples

Examples in this document show input from the keyboard or a file in bold text and
console output from the command prompt or the ij application in regular text.

java -Dij.protocol=jdbc:derby: org.apache.derby.tools.ij

ij version 10.16
ij> connect 'menuDB;create=true';
ij> CREATE TABLE menu(course CHAR(10), item CHAR(20), price INTEGER);
0 rows inserted/updated/deleted
ij> disconnect;
ij> exit;

ij SQL command behavior

Any commands other than those documented in the ij command reference are handed
to the current connection to execute directly.
The statement's closing semicolon, used by ij to determine that it has ended, is not
passed to the underlying connection. Only one statement at a time is passed to the
connection. If the underlying connection itself accepts semicolon-separated statements
(which Derby does not), they can be passed to the connection using ij's Execute
command to pass in a command string containing semicolon-separated commands.
ij uses the result of the JDBC execute request to determine whether it should print a
number-of-rows message or display a result set.
If a JDBC execute request causes an exception, it displays the SQLState, if any, and an
error message.
Setting the ij property ij.showErrorCode to true displays the SQLException's error
code (see ij properties reference).
The number-of-rows message for inserts, updates, and deletes conforms to the JDBC
specification for any SQL statement that does not have a result set. DDL (data definition
language) commands typically report "0 rows inserted/updated/deleted" when they
successfully complete.

32
Derby Tools and Utilities Guide
To display a result set, ij formats a banner based on the JDBC ResultSetMetaData
information returned from getColumnLabel and getColumnWidth. Long columns wrap the
screen width, using multiple lines. An & character denotes truncation (ij limits displayed
width of a column to 128 characters by default; see MaximumDisplayWidth command).
ij displays rows as it fetches them. If the underlying DBMS materializes rows only as
they are requested, ij displays a partial result followed by an error message if there is a
error in fetching a row partway through the result set.
ij verifies that a connection exists before issuing statements against it and does not
execute SQL when no connection has yet been made.
There is no support in ij for the JDBC feature multiple result sets.
ij command example

ij> INSERT INTO menu VALUES ('appetizer','baby greens',7),

3 rows selected
ij>

Absolute command
The Absolute command moves the cursor to the row specified by the int argument,
then fetches the row.
The command displays a banner and the values of the row. The cursor must have been
created with the Get Scroll Insensitive Cursor command.
Syntax

ABSOLUTE int Identifier

Example

ij> autocommit off;

ij> get scroll insensitive cursor scrollCursor as
'SELECT * FROM menu FOR UPDATE OF price';
ij> absolute 3 scrollCursor;
COURSE |ITEM |PRICE
-----------------------------------------------
entree |lamb chop |14

After Last command

The After Last command moves the cursor to after the last row, then fetches the row.
Since there is no current row, it returns the message No current row.
The cursor must have been created with the Get Scroll Insensitive Cursor
command.
Syntax

AFTER LAST Identifier

Example

33
Derby Tools and Utilities Guide
ij> get scroll insensitive cursor scrollCursor as
'SELECT * FROM menu FOR UPDATE OF price';
ij> after last scrollcursor;
No current row

Async command
The Async command lets you execute an SQL statement in a separate thread.
This command is used in conjunction with the Wait For command to get the results.
Syntax

ASYNC Identifier String

You supply the SQL statement, which is any valid SQL statement, as a String. The
Identifier you must supply for the async SQL statement is used in the Wait For
command and is a case-insensitive ij identifier. An identifier that does not specify a
connectionName must not be the same as any other identifier for an async statement
on the current connection; an identifier that specifies a connectionName must not be
the same as any other identifier for an async statement on the designated connection.
You cannot reference a statement previously prepared and named by the ijPrepare
command in this command.
ij creates a new thread in the current or designated connection to issue the SQL
statement. The separate thread is closed once the statement completes.
Examples

ij> async aInsert 'INSERT into menu values (''entree'',''chicken'',11)';

ij> INSERT INTO menu VALUES ('dessert','ice cream',3);
1 rows inserted/updated/deleted.
ij> wait for aInsert;
1 rows inserted/updated/deleted.
-- the result of the asynchronous insert

ij> connect 'jdbc:derby:memory:dummy;create=true;user=john'

3 rows selected
ij(FRED_CONN)>

Autocommit command
The Autocommit command turns the connection's auto-commit mode on or off.
JDBC specifies that the default auto-commit mode is ON. Certain types of processing
require that auto-commit mode be OFF. For information about auto-commit, see the
Derby Developer's Guide.
If auto-commit mode is changed from off to on when there is a transaction outstanding,
that work is committed when the current transaction commits, not at the time auto-commit

34
Derby Tools and Utilities Guide
is turned on. Use Commit or Rollback before turning on auto-commit when there
is a transaction outstanding, so that all prior work is completed before the return to
auto-commit mode.
Syntax

AUTOCOMMIT { ON | OFF }

Example

ij> autocommit off;

ij> DROP TABLE menu;
0 rows inserted/updated/deleted
ij> CREATE TABLE menu (course CHAR(10), item CHAR(20), price INT);
0 rows inserted/updated/deleted
ij> INSERT INTO menu VALUES ('entree', 'lamb chop', 14),
('dessert', 'creme brulee', 6),
('appetizer', 'baby greens', 7);
3 rows inserted/updated/deleted
ij> commit;
ij> autocommit on;
ij>

Before First command

The Before First command moves the cursor to before the first row, then fetches the
row.
Since there is no current row, it returns the message No current row.
The cursor must have been created with the Get Scroll Insensitive Cursor
command.
Syntax

BEFORE FIRST int Identifier

Example

ij> get scroll insensitive cursor scrollCursor as

'SELECT * FROM menu FOR UPDATE OF price';
ij> before first scrollcursor;
No current row

Close command
The Close command closes the named cursor.
The cursor must have previously been successfully created with ij's Get Cursor or
Get Scroll Insensitive Cursor command.
Syntax

CLOSE Identifier

Example

ij> get cursor menuCursor as 'SELECT * FROM menu';

35
Derby Tools and Utilities Guide
dessert |creme brulee |6
ij> close menuCursor;
ij>

Commit command
The Commit command issues a java.sql.Connection.commit request.
Use this command only if auto-commit is off. A java.sql.Connection.commit request
commits the currently active transaction and initiates a new transaction.
Syntax

COMMIT

Example

ij> commit;
ij>

Connect command
The Connect command connects to the database indicated by the ConnectionURLString
argument.
Specifically, the command takes the value of the ConnectionURLString (the database
connection URL) and issues a getConnection request using java.sql.DriverManager or
a javax.sql.DataSource implementation (see the ij.dataSource property) to set the
current connection to that database connection URL.
You have the option of specifying a name for your connection. Use the Set
Connection command to switch between connections. If you do not name a connection,
the system generates a name automatically.
You also have the option of specifying a named protocol previously created with the
Protocol command or the ij.protocol.protocolName property.
If the connection requires a user name and password, supply those with the optional user
and password parameters.
If the command succeeds, the connection becomes the current one, and ij displays
a new prompt for the next command to be entered. If you have more than one open
connection, the name of the connection appears in the prompt.
All further commands are processed against the new, current connection.
Syntax

CONNECT ConnectionURLString [ PROTOCOL Identifier ]

[ AS Identifier ] [ USER String PASSWORD String ]

Examples

ij> connect 'jdbc:derby:menuDB;create=true';

ij> -- we create a new table in menuDB:
CREATE TABLE menu(course CHAR(10), item CHAR(20), price INTEGER);
ij> protocol 'jdbc:derby:';
ij> connect 'sample' as sample1;
ij(SAMPLE1)> connect 'newDB;create=true' as newDB;
ij(NEWDB)> show connections;
CONNECTION0 - jdbc:derby:menuDB
NEWDB* - jdbc:derby:anotherDB
SAMPLE1 - jdbc:derby:newDB
ij>

36
Derby Tools and Utilities Guide
ij> connect 'jdbc:derby:sample' user 'sa' password 'cloud3x9';
ij>

ij> protocol 'jdbc:derby:';

ij> connect 'memory:sample;create=true';

ij> protocol 'jdbc:derby:memory:';

ij> connect 'sample;create=true';

Describe command
The Describe command provides a decription of the specified table or view.
For a list of tables in the current schema, use the Show Tables command. For a list
of views in the current schema, use the Show Views command. For a list of available
schemas, use the Show Schemas command.
If the table or view is in a particular schema, qualify it with the schema name. If the
table or view name is case-sensitive, enclose it in single quotes. You can display all the
columns from all the tables and views in a single schema in a single display by using the
wildcard character '*'. See the examples below.
Syntax

DESCRIBE { table-Name | view-Name }

Examples

ij> describe airlines;

-- describe a table in another schema:

ij> describe user2.flights;
-- describe a table whose name is in mixed-case:
ij> describe 'EmployeeTable';
-- describe a table in a different schema, with a case-sensitive name:
ij> describe 'MyUser.Orders';
-- describe all columns from all tables and views in the APP schema:
ij> describe 'APP.*';
-- describe all columns in the current schema:
ij> describe '*';

Disconnect command
The Disconnect command disconnects from the database.
Specifically, Disconnect issues a java.sql.Connection.close request against the
connection indicated on the command line. There must be a current connection at the
time the request is made.
Syntax

DISCONNECT [ ALL | CURRENT | ConnectionIdentifier ]

37
Derby Tools and Utilities Guide
If ALL is specified, all known connections are closed, and there will be no current
connection.
Disconnect CURRENT is the same as Disconnect without indicating a connection:
the default connection is closed.
If a connection name is specified with a ConnectionIdentifier, the command disconnects
the named connection. The name must be the name of a connection in the current
session provided with the ij.connection.connectionName property or with the
Connect command.
If the ij.database property or the Connect command without the AS clause was
used, you can supply the name the system generated for the connection. If the current
connection is the named connection, when the command completes, there will be no
current connection, and you must issue a Set Connection or Connect command.
A Disconnect command issued against a Derby connection does not shut down the
database or Derby (but the Exit command does).
Example

ij> connect 'jdbc:derby:menuDB;create=true';

ij> -- we create a new table in menuDB:
CREATE TABLE menu(course CHAR(10), ITEM char(20), PRICE integer);
0 rows inserted/updated/deleted
ij> disconnect;

ij> protocol 'jdbc:derby:';

ij> connect 'sample' as sample1;
ij> connect 'newDB;create=true' as newDB;
SAMPLE1 - jdbc:derby:sample
NEWDB* - jdbc:derby:newDB;create=true
* = current connection
ij(NEWDB)> set connection sample1;
ij> disconnect sample1;
ij> disconnect all;
ij>

Driver command
The Driver command takes the value of the DriverNameString argument and issues a
Class.forName request to load the named class.
The class is expected to be a JDBC driver that registers itself with
java.sql.DriverManager.
You may find this command useful if you need to reload the driver after you have shut
down the Derby engine and deregistered the driver.
If the Driver command succeeds, a new ij prompt appears for the next command.
Syntax

DRIVER DriverNameString

Example

ij> -- load the Derby driver so that a connection

-- can be made:
driver 'org.apache.derby.jdbc.EmbeddedDriver';
ij> connect 'jdbc:derby:menuDB;create=true';
ij>

38
Derby Tools and Utilities Guide

Elapsedtime command
The Elapsedtime command, if set to ON, displays the total time elapsed during
statement execution.
The default value is OFF.
Syntax

ELAPSEDTIME { ON | OFF }

Example

ij> elapsedtime on;

ij> VALUES current_date;
1
----------
1998-07-15
ELAPSED TIME = 2134 milliseconds
ij>

Execute command
The Execute command executes an SQL statement or a named prepared statement.
Syntax

EXECUTE { SQLString | PreparedStatementIdentifier }

[ USING { String | Identifier } ]

The Execute command can be used in either of the following ways:

• To execute an SQL statement entered as an SQLString. The SQLString is passed
to the connection without further examination or processing by ij.
Note: Normally, you execute SQL statements directly, not with the Execute
command.
• To execute a named statement identified by PreparedStatementIdentifier. This
command must be previously prepared with ij's Prepare command.
To execute either flavor of statement when that statement contains dynamic parameters,
specify the values in the Using portion of the command. In this style, the SQLString or
previously prepared PreparedStatementIdentifier is executed using the values supplied
as String or Identifier. The Identifier in the Using clause must have a result set as its
result. Each row of the result set is applied to the input parameters of the statement to
be executed, so the number of columns in the Using clause's result set must match the
number of input parameters in the Execute command's SQL statement. The results of
each execution of the Execute command's SQL statement are displayed as they are
made. If the Using clause's result set contains no rows, the Execute command's SQL
statement is not executed.
When auto-commit mode is on, the Using clause's result set is closed upon the first
execution of the Execute command's SQL statement. To ensure multiple-row execution
of the Execute command, use the Autocommit command to turn auto-commit off.
Examples

ij> autocommit off;

ij> prepare menuInsert as 'INSERT INTO menu VALUES (?, ?, ?)';
ij> execute menuInsert using 'VALUES
(''entree'', ''lamb chop'', 14),
(''dessert'', ''creme brulee'', 6)';
1 row inserted/updated/deleted
1 row inserted/updated/deleted

39
Derby Tools and Utilities Guide
ij> commit;

ij> connect 'jdbc:derby:firstdb;create=true';

ij> create table firsttable (id int primary key,
name varchar(12));
0 rows inserted/updated/deleted
ij> insert into firsttable values
(10,'TEN'),(20,'TWENTY'),(30,'THIRTY');
3 rows inserted/updated/deleted
ij> select * from firsttable;
ID |NAME
------------------------
10 |TEN
20 |TWENTY
30 |THIRTY

3 rows selected
ij> connect 'jdbc:derby:seconddb;create=true';
ij(CONNECTION1)> create table newtable (newid int primary key,
newname varchar(12));
0 rows inserted/updated/deleted
ij(CONNECTION1)> prepare src@connection0 as 'select * from firsttable';
ij(CONNECTION1)> autocommit off;
ij(CONNECTION1)> execute 'insert into newtable(newid, newname)
values(?,?)' using src@connection0;
1 row inserted/updated/deleted
1 row inserted/updated/deleted
1 row inserted/updated/deleted
ij(CONNECTION1)> commit;
ij(CONNECTION1)> select * from newtable;
NEWID |NEWNAME
------------------------
10 |TEN
20 |TWENTY
30 |THIRTY

3 rows selected
ij(CONNECTION1)> show connections;
CONNECTION0 - jdbc:derby:firstdb
CONNECTION1* - jdbc:derby:seconddb
ij(CONNECTION1)> disconnect connection0;
ij>

Exit command
The Exit command causes the ij application to complete and processing to halt.
Issuing this command from within a file started with the Run command or on the
command line causes the outermost input loop to halt.
ij automatically shuts down a Derby database running in an embedded environment
(that is, it issues a Connect 'jdbc:derby:;shutdown=true' request) on exit.
ij exits when the Exit command is entered or, if given a command file on the Java
invocation line, when the end of the command file is reached.
Syntax

EXIT

Example

ij> disconnect;
ij> exit;

40
Derby Tools and Utilities Guide

First command
The First command moves the cursor to the first row in the ResultSet, then fetches the
row.
The command displays a banner and the values of the row. The cursor must have been
created with the Get Scroll Insensitive Cursor command.
Syntax

FIRST Identifier

Example

ij> get scroll insensitive cursor scrollCursor as

'SELECT * FROM menu FOR UPDATE OF price';
ij> first scrollcursor;
COURSE |ITEM |PRICE
-----------------------------------------------
entree |lamb chop |14

Get Cursor command

The Get Cursor command creates a cursor with the name of the specified Identifier by
issuing a java.sql.Statement.executeQuery request on the value of the specified String.
If the String is a statement that does not generate a result set, the behavior of the
underlying database determines whether an empty result set or an error is issued. If there
is an error in executing the statement, no cursor is created.
ij sets the cursor name using a java.sql.Statement.setCursorName request. Behavior
with respect to duplicate cursor names is controlled by the underlying database. Derby
does not allow multiple open cursors with the same name.
Once a cursor has been created, you can use ij's Next and Close commands to
step through its rows and (if the connection supports positioned update and delete
commands) to alter the rows.
Syntax

GET [ WITH { HOLD | NOHOLD } ] CURSOR Identifier AS String

WITH HOLD is the default attribute of the cursor. For a non-holdable cursor, use the WITH
NOHOLD option.
Examples

ij> -- autocommit needs to be off so that the positioned update

ij> -- can see the cursor it operates against.
ij> autocommit off;
ij> get cursor menuCursor as
'SELECT * FROM menu FOR UPDATE OF price';
ij> next menuCursor;
COURSE |ITEM |PRICE
-----------------------------------------------
entree |lamb chop |14
ij> next menuCursor;
COURSE |ITEM |PRICE
-----------------------------------------------
dessert |creme brulee |6
ij> UPDATE menu SET price=price+1 WHERE CURRENT OF menuCursor;
1 row inserted/updated/deleted
ij> next menuCursor;
COURSE |ITEM |PRICE
-----------------------------------------------

41
Derby Tools and Utilities Guide
appetizer |baby greens salad |7
ij> close menuCursor;
ij> commit;
ij>

ij> connect 'jdbc:derby:memory:dummy;create=true;user=john'

as john_conn;
ij> create table john_tbl(c int);
0 rows inserted/updated/deleted
ij> insert into john_tbl values(1),(2),(3);
3 rows inserted/updated/deleted
ij> connect 'jdbc:derby:memory:dummy;user=fred' as fred_conn;
ij(FRED_CONN)> get cursor john_cursor@john_conn
as 'select * from john_tbl';
ij(FRED_CONN)> next john_cursor@john_conn;
C
-----------
1
ij(FRED_CONN)> next john_cursor@john_conn;
C
-----------
2
ij(FRED_CONN)> next john_cursor@john_conn;
C
-----------
3
ij(FRED_CONN)> next john_cursor@john_conn;
No current row
ij(FRED_CONN)> close john_cursor@john_conn;
ij(FRED_CONN)> disconnect all;
ij>

Get Scroll Insensitive Cursor command

The Get Scroll Insensitive Cursor command creates a scrollable insensitive
cursor with the name of the specified Identifier.
It does this by issuing a call to
createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY) and then executing the statement with a
java.sql.StatementExecuteQuery request on the value of the specified String.
If the String is a statement that does not generate a result set, the behavior of the
underlying database determines whether an empty result set or an error is issued. If there
is an error in executing the statement, no cursor is created.
ij sets the cursor name using a java.sql.Statement.setCursorName request. Behavior
with respect to duplicate cursor names is controlled by the underlying database. Derby
does not allow multiple open cursors with the same name.
Once a scrollable cursor has been created, you can use the following commands to work
with the result set:
• Absolute command
• After Last command
• Before First command
• Close command
• First command
• Last command
• Next command
• Previous command
• Relative command
Syntax

42
Derby Tools and Utilities Guide
GET SCROLL INSENSITIVE [ WITH { HOLD | NOHOLD } ]
CURSOR Identifier AS String

WITH HOLD is the default attribute of the cursor. For a non-holdable cursor, use the WITH
NOHOLD option.
Examples

ij> autocommit off;

ij> connect 'jdbc:derby:memory:dummy;create=true;user=john'

as john_conn;
ij> create table john_tbl(c int);
0 rows inserted/updated/deleted
ij> insert into john_tbl values(1),(2),(3);
3 rows inserted/updated/deleted
ij> connect 'jdbc:derby:memory:dummy;user=fred' as fred_conn;
ij(FRED_CONN)> get scroll insensitive cursor john_cursor@john_conn
as 'select * from john_tbl';
ij(FRED_CONN)> next john_cursor@john_conn;
C
-----------
1
ij(FRED_CONN)> getcurrentrownumber john_cursor@john_conn;
1
ij(FRED_CONN)> last john_cursor@john_conn;
C
-----------
3
ij(FRED_CONN)> previous john_cursor@john_conn;
C
-----------
2
ij(FRED_CONN)> first john_cursor@john_conn;
C

43
Derby Tools and Utilities Guide
-----------
1
ij(FRED_CONN)> after last john_cursor@john_conn;
No current row
ij(FRED_CONN)> before first john_cursor@john_conn;
No current row
ij(FRED_CONN)> relative 2 john_cursor@john_conn;
C
-----------
2
ij(FRED_CONN)> absolute 1 john_cursor@john_conn;
C
-----------
1
ij(FRED_CONN)> close john_cursor@john_conn;
ij(FRED_CONN)> disconnect all;
ij>

Help command
The Help command prints out a brief list of the ij commands.
Syntax

HELP

HoldForConnection command
The HoldForConnection command sets the default holdability for a connection to the
default ResultSet.HOLD_CURSORS_OVER_COMMIT.
Syntax

HOLDFORCONNECTION

Example

ij> HOLDFORCONNECTION;

Last command
The Last command moves the cursor to the last row in the ResultSet, then fetches the
row.
The command displays a banner and the values of the row. The cursor must have been
created with the Get Scroll Insensitive Cursor command.
Syntax

LAST Identifier

Example

ij> get scroll insensitive cursor scrollCursor as

44
Derby Tools and Utilities Guide

LocalizedDisplay command
The LocalizedDisplay command specifies that ij should display locale-sensitive
data (such as dates) in the native format for the ij locale.
The ij locale is the same as the Java system locale.
Syntax

LOCALIZEDDISPLAY { on | off }

Example
The following demonstrates LocalizedDisplay in an English locale:

ij> VALUES CURRENT_DATE;

1
----------
2014-07-01

1 row selected
ij> localizeddisplay on;
ij> VALUES CURRENT_DATE;
1
------------------
July 1, 2014

1 row selected

MaximumDisplayWidth command
The MaximumDisplayWidth command sets the largest display width for columns to the
specified value.
This command is generally used to increase the default value in order to display large
blocks of text.
Syntax

MAXIMUMDISPLAYWIDTH integer_value

Example

ij> maximumdisplaywidth 3;
ij> VALUES 'NOW IS THE TIME!';
1
---
NOW
ij> maximumdisplaywidth 30;
ij> VALUES 'NOW IS THE TIME!';
1
----------------
NOW IS THE TIME!

Next command
The Next command fetches the next row from the specified named cursor.
The command displays a banner and the values of the row. The cursor must have been
created with the Get Cursor or Get Scroll Insensitive Cursor command.
Syntax

NEXT Identifier

45
Derby Tools and Utilities Guide
Example

ij> get cursor menuCursor as 'SELECT * FROM menu';

ij> next menuCursor;
COURSE |ITEM |PRICE
-----------------------------------------------
entree |lamb chop |14
ij>

NoHoldForConnection command
The NoHoldForConnection command changes the default holdability
for a connection from ResultSet.HOLD_CURSORS_OVER_COMMIT to
ResultSet.CLOSE_CURSORS_AT_COMMIT.
Syntax

NOHOLDFORCONNECTION

Example

ij> NOHOLDFORCONNECTION;

Prepare command
The Prepare command creates a java.sql.PreparedStatement using the value of the
specified String, accessible in ij by the Identifier given to it.
If a prepared statement with that name already exists in ij, an error will be returned, and
the previous prepared statement will remain. Use the Remove command to remove the
previous statement first. If there are any errors in preparing the statement, no prepared
statement is created.
Any SQL statements allowed in the underlying connection's prepared statement can be
prepared with this command.
If the Identifier specifies a connectionName, the statement is prepared on the specified
connection.
Syntax

PREPARE Identifier AS String

Examples

ij> prepare seeMenu as 'SELECT * FROM menu';

2 rows selected
ij>

ij> connect 'jdbc:derby:firstdb;create=true';

46
Derby Tools and Utilities Guide
------------------------
10 |TEN
20 |TWENTY
30 |THIRTY

Previous command
The Previous command moves the cursor to the row previous to the current one, then
fetches the row.
The command displays a banner and the values of the row. The cursor must have been
created with the Get Scroll Insensitive Cursor command.
Syntax

PREVIOUS Identifier

Example

ij> get scroll insensitive cursor scrollCursor as

Protocol command
The Protocol command specifies the protocol for establishing connections and
automatically loads the appropriate driver.
Providing a protocol allows you to use a shortened database connection URL for
connections. You can provide only the database name (and a subsubprotocol name
if needed) instead of the full protocol. In addition, you do not need to use the Driver
command or specify a driver at start-up, since the driver is loaded automatically.
Syntax

PROTOCOL String [ AS Identifier ]

The protocol specified by the String is the part of the database connection URL syntax
appropriate for your environment, including the JDBC protocol and the protocol specific to
Derby. For further information about the Derby database connection URL, see Database
connection URLs. Only Derby protocols are supported. Those protocols are listed in
ij.protocol property.
If you name the protocol by specifying an Identifier, you can refer to the protocol name in
the Connect command.
Examples

ij> protocol 'jdbc:derby:';

47
Derby Tools and Utilities Guide
ij> connect 'sample';

ij> protocol 'jdbc:derby:';

ij> connect 'memory:sample;create=true';

ij> protocol 'jdbc:derby:memory:';

ij> connect 'sample;create=true';

Readonly command
The Readonly command sets the current connection to a "read-only" connection, as if
the current user were defined as a readOnlyAccess user.
For more information about database authorization, see "Configuring user authorization"
in the Derby Security Guide.
Syntax

READONLY { ON | OFF }

Example

ij> connect 'jdbc:derby:menuDB';

Relative command
The Relative command moves the cursor to the row that is the specified number of
rows relative to the current row, then fetches the row.
The command displays a banner and the values of the row. The cursor must have been
created with the Get Scroll Insensitive Cursor command.
Syntax

RELATIVE int Identifier

Example

ij> -- autocommit needs to be off so that the positioned update

ij> -- can see the cursor it operates against.
ij> autocommit off;
ij> get scroll insensitive cursor scrollCursor as
'SELECT * FROM menu FOR UPDATE OF price';
ij> last scrollcursor;
COURSE |ITEM |PRICE
-----------------------------------------------
dessert |creme brulee |6
ij> previous scrollcursor;
COURSE |ITEM |PRICE
-----------------------------------------------
entree |lamb chop |14

48
Derby Tools and Utilities Guide
ij> relative 1 scrollcursor;
COURSE |ITEM |PRICE
-----------------------------------------------
dessert |creme brulee |6

Remove command
The Remove command removes a previously prepared statement from ij.
Syntax

REMOVE Identifier

The specified Identifier is the name by which the statement was prepared. The statement
is closed to release its database resources.
Example

ij> prepare seeMenu as 'SELECT * FROM menu';

2 rows selected
ij> remove seeMenu;
ij> execute seeMenu;
IJ ERROR: Unable to establish prepared statement SEEMENU
ij>

Rollback command
The Rollback command issues a java.sql.Connection.rollback request.
Use this command only if auto-commit is off. A java.sql.Connection.rollback request
undoes the currently active transaction and initiates a new transaction.
Syntax

ROLLBACK

Example

ij> autocommit off;

3 rows selected
ij>

49
Derby Tools and Utilities Guide

Run command
The Run command redirects ij processing to read from a specified file.
The command assumes that the value of the specified String is a valid file name. It
reads from that file until it ends or an Exit command is executed. If the end of the file is
reached without ij exiting, reading will continue from the previous input source once the
end of the file is reached. Files can contain additional Run commands.
ij prints out the statements in the file as it executes them.
Any changes made to the ij environment by the file are visible in the environment when
processing resumes.
Syntax

RUN String

Example

ij> run 'setupMenuConn.ij';

ij> -- this is setupMenuConn.ij
-- ij displays its contents as it processes file
ij> connect 'jdbc:derby:menuDB';
ij> autocommit off;
ij> -- this is the end of setupMenuConn.ij
-- there is now a connection to menuDB and no autocommit.
-- input will now resume from the previous source.
;
ij>

Set Connection command

The Set Connection command specifies which connection to make current when
more than one connection is open.
Use the Show Connections command to display open connections.
If there is no such connection, an error results and the current connection is unchanged.
Syntax

SET CONNECTION Identifier

Example

ij> protocol 'jdbc:derby:';

ij> connect 'sample' as sample1;
ij> connect 'newDB;create=true' as newDB;
ij (NEWDB)> show connections;
SAMPLE1 - jdbc:derby:sample
NEWDB* - jdbc:derby:newDB;create=true
* = current connection
ij(NEWDB)> set connection sample1;
ij(SAMPLE1)> disconnect all;
ij>

Show command
The Show command displays information about active connections and database objects.
Syntax

SHOW

50
Derby Tools and Utilities Guide
{
CONNECTIONS |
FUNCTIONS [ IN schemaName ] |
INDEXES [ IN schemaName | FROM tableName ] |
PROCEDURES [ IN schemaName ] |
ROLES |
ENABLED_ROLES |
SETTABLE_ROLES |
SCHEMAS |
SYNONYMS [ IN schemaName ] |
TABLES [ IN schemaName ] |
VIEWS [ IN schemaName ] |

SHOW CONNECTIONS
If there are no connections, the SHOW CONNECTIONS command returns "No connections
available".
Otherwise, the command displays a list of connection names and the URLs used to
connect to them. The currently active connection, if there is one, is marked with an
asterisk (*) after its name.
SHOW CONNECTIONS Example

ij> connect 'sample' as sample1;

ij> connect 'newDB;create=true' as newDB;
ij(NEWDB)> show connections;
SAMPLE1 - jdbc:derby:sample
NEWDB* - jdbc:derby:newDB;create=true
* = current connection
ij(NEWDB)>

SHOW FUNCTIONS
The SHOW FUNCTIONS command displays all functions in the database. By default, both
system functions and user-defined functions appear in the output.
If IN schemaName is specified, only the functions in the specified schema are displayed.
SHOW FUNCTIONS Example
If you created the TO_DEGREES function described in "CREATE FUNCTION statement"
in the Derby Reference Manual, the output of the CREATE FUNCTION statement and
the SHOW FUNCTIONS command would look something like the following:

ij> connect 'jdbc:derby:firstdb';

ij> CREATE FUNCTION TO_DEGREES ( RADIANS DOUBLE )
> RETURNS DOUBLE
> PARAMETER STYLE JAVA
> NO SQL LANGUAGE JAVA
> EXTERNAL NAME 'java.lang.Math.toDegrees';
0 rows inserted/updated/deleted
ij> show functions in app;
FUNCTION_SCHEM|FUNCTION_NAME |REMARKS
-------------------------------------------------------------------------
APP |TO_DEGREES |java.lang.Math.toDegrees

1 row selected

SHOW INDEXES
The SHOW INDEXES command displays all the indexes in the database.
If IN schemaName is specified, only the indexes in the specified schema are displayed.
If FROM tableName is specified, only the indexes on the specified table are displayed.

51
Derby Tools and Utilities Guide
SHOW INDEXES Examples

ij> show indexes in app;

4 rows selected

SHOW PROCEDURES
The SHOW PROCEDURES command displays all the procedures in the database that have
been created with the CREATE PROCEDURE statement, as well as system procedures.
If IN schemaName is specified, only procedures in the specified schema are displayed.
SHOW PROCEDURES Example

ij> show procedures in syscs_util;

18 rows selected

SHOW ROLES, SHOW ENABLED_ROLES, and SHOW SETTABLE_ROLES

52
Derby Tools and Utilities Guide
The SHOW ROLES command displays the names of all roles created, whether settable for
the current session or not.
The SHOW ENABLED_ROLES command displays the names of all the roles whose
privileges are available for the current session. That is, it shows the current role and any
role contained in the current role. (For a definition of role containment, see "Using SQL
roles" in the Derby Security Guide.)
The SHOW SETTABLE_ROLES command displays all the roles that the current session
can set, that is, all roles that have been granted to the current user or to PUBLIC.
The roles shown by these commands are sorted in ascending order.
SHOW ROLES, SHOW ENABLED_ROLES, and SHOW SETTABLE_ROLES
Examples
In the following examples, both CASUALUSER and POWERUSER contain ANYUSER,
but ANYUSER is not settable directly.

ij> show roles;

ROLEID
------------------------------
ANYUSER
CASUALUSER
POWERUSER

3 rows selected
ij> show enabled_roles;
ROLEID
------------------------------
ANYUSER
CASUALUSER

2 rows selected
ij> show settable_roles;
ROLEID
------------------------------
CASUALUSER
POWERUSER

2 rows selected

SHOW SCHEMAS
The SHOW SCHEMAS command displays all of the schemas in the current connection.
SHOW SCHEMAS Example

ij> show schemas;

TABLE_SCHEM
------------------------------
APP
NULLID
SQLJ
SYS
SYSCAT
SYSCS_DIAG
SYSCS_UTIL
SYSFUN
SYSIBM
SYSPROC
SYSSTAT

11 rows selected

SHOW SYNONYMS

53
Derby Tools and Utilities Guide
The SHOW SYNONYMS command displays all the synonyms in the database that have
been created with the CREATE SYNONYMS statement.
If IN schemaName is specified, only synonyms in the specified schema are displayed.
SHOW SYNONYMS Example

ij> show synonyms;

TABLE_SCHEM |TABLE_NAME |REMARKS
------------------------------------------------------------------------
APP |MYAIRLINES |

SHOW TABLES
The SHOW TABLES command displays all of the tables in the current schema.
If IN schemaName is specified, the tables in the given schema are displayed.
SHOW TABLES Example

ij> show tables;

7 rows selected

SHOW VIEWS
The SHOW VIEWS command displays all of the views in the current schema.
If IN schemaName is specified, the views in the given schema are displayed.
SHOW VIEWS Example

ij> show views;

TABLE_SCHEM |TABLE_NAME |REMARKS
------------------------------------------------------------------------
APP |TOTALSEATS |

1 row selected

Wait For command

The Wait For command displays the results of a previously started asynchronous
command.
The identifier for the asynchronous command must have been used in a previous Async
command on this connection. The Wait For command waits for the SQL statement to
complete execution, if it has not already, and then displays the results. If the statement
returns a result set, the Wait For command steps through the rows, not the Async
command. This might result in further execution time passing during the result display.
Syntax

WAIT FOR Identifier

Example
See Async command.

54
Derby Tools and Utilities Guide

Syntax for comments in ij commands

ij accepts two forms of comments in commands.
Syntax

-- Text

/* Text */

You can use a double dash to create a comment anywhere within an ij command line
and as permitted by the underlying connection within SQL commands. The comment is
ended at the first new line encountered in the text.
Comments are ignored on input and have no effect on the output displayed.
You can also enclose text in /* */ characters to create either one-line or multi-line
comments. Nested comments are permitted. For example, you could put lines like the
following into a script named comment.sql:

/* start the file with a /* nested comment */ and see what happens */
connect 'jdbc:derby:newdb;create=true';
values 'hi!';
create table t (x int);
/* use a multi-line comment */
/*
insert into t values 1, 2, 3;
insert into t values 4, 5, 6;
*/
/* end the file with a comment */
values 'This is a test';
/* This is also a test */

Examples

ij> -- this is a comment;

-- the semicolons in the comment are not taken as the end
-- of the command; for that, we put it outside the --:
;
ij>

ij> run 'comment.sql';

ij> /* start the file with a /* nested comment */ and see what happens */
connect 'jdbc:derby:newdb;create=true';
ij> values 'hi!';
1
---
hi!

1 row selected
ij> create table t (x int);
0 rows inserted/updated/deleted
ij> /* use a multi-line comment */
/*
insert into t values 1, 2, 3;
insert into t values 4, 5, 6;
*/
/* end the file with a comment */
values 'This is a test';
1
--------------
This is a test

1 row selected
ij> /* This is also a test */
;

55
Derby Tools and Utilities Guide
ij>

Syntax for identifiers in ij commands

Some ij commands require identifier arguments.
These identifiers exist within the scope of ij only and are distinct from any identifiers
used in SQL commands, except in the case of the Get Cursor command. The Get
Cursor command specifies a cursor name to use in creating a result set.
ij does not recognize or permit delimited identifiers in ij commands. They can be used
in SQL commands.
Syntax

Identifier [ @ connectionName ]

These ij identifiers are case-insensitive. They must begin with a letter in the range A-Z,
and they can consist of any number of letters in the range A-Z, digits in the range 0-9,
and underscore (_) characters.
An identifier can optionally use an at sign (@) followed by a connectionName. Spaces on
either side of the @ sign are optional. If you specify a connectionName, you can refer to
databases on different connections. This capability enables you to perform tasks such
as copying data from one database to another. For an example of copying data between
databases, see Execute command. For other examples, see Async command, Get
Cursor command, and Get Scroll Insensitive Cursor command.
Examples
These are valid ij identifiers:

foo1
exampleIdentifier12345
another_one
myId@connection0
id2 @ connection1

Syntax for strings in ij commands

Some ij commands require string arguments.
Syntax

'Text'

ij strings are represented by the same literal format as SQL strings and are delimited
by single quotation marks. To include a single quotation mark in a string, you must use
two single quotation marks, as shown in the examples below. ij places no limitation on
the lengths of strings, and will treat embedded new lines in the string as characters in the
string.
Some ij commands execute SQL commands specified as strings. Therefore, you must
double any single quotation marks within such strings, as shown in the second example
below.
The cases of letters within a string are preserved.
Examples

This is a string in ij And this is its value

'Mary''s umbrella' Mary's umbrella
'hello world' hello world

56
Derby Tools and Utilities Guide

--returns Joe's
execute 'VALUES ''Joe''''s''';

ij errors
ij might issue messages to inform the user of errors during processing of statements.

ERROR SQLState
When the underlying JDBC driver returns an SQLException, ij displays the
SQLException message with the prefix "ERROR SQLState". If the SQLException has no
SQLState associated with it, the prefix "ERROR (no SQLState)" is used.

WARNING SQLState
Upon completion of execution of any JDBC request, ij issues a getWarnings request
and displays the SQLWarnings that are returned.
Each SQLWarning message is displayed with the prefix "WARNING SQLState". If an
SQLWarning has no SQLState associated with it, the prefix "WARNING (no SQLState)"
is used.

IJ ERROR
When ij runs into errors processing user commands, it prints out a message with the
prefix "IJ ERROR".
Examples of errors include being unable to open the file named in a Run command and
not having a connection to disconnect from.

IJ WARNING
ij displays warning messages to let the user know if behavior might be unexpected. ij
warnings are prefixed with "IJ WARNING".

JAVA ERROR
When an unexpected Java exception occurs, ij prints a message with the prefix "JAVA
ERROR".

57
Derby Tools and Utilities Guide

sysinfo
Use the sysinfo utility to display information about your Java environment and Derby
(including version information).
To use sysinfo, do one of the following:
• If you are relatively new to the Java programming language, follow the
instructions in "Setting up your environment" in Getting Started with Derby
to set the DERBY_HOME and JAVA_HOME environment variables and to add
DERBY_HOME/bin to your path. Then use the following command:

sysinfo
• If you are a regular Java user but are new to Derby, set the DERBY_HOME
environment variable, then use a java command to invoke the derbyrun.jar file:

(UNIX) java [options] -jar $DERBY_HOME/lib/derbyrun.jar sysinfo

(Windows) java [options] -jar %DERBY_HOME%\lib\derbyrun.jar sysinfo

• If you are familiar with both the Java programming language and Derby, you have
already set DERBY_HOME. Set your classpath to include the Derby jar files. Then
use a java command to invoke the sysinfo class directly.

java org.apache.derby.tools.sysinfo

sysinfo example
When you run the sysinfo command using the derbyrun.jar file, the output looks
something like this.

java -jar C:\db-derby-10.11.0.0-bin\lib\derbyrun.jar sysinfo

------------------ Java Information ------------------
Java Version: 1.8.0_05
Java Vendor: Oracle Corporation
Java home: C:\Program Files\Java\jre8
Java classpath: C:\db-derby-10.11.0.0-bin\lib\derbyrun.jar
OS name: Windows 7
OS architecture: amd64
OS version: 6.1
Java user name: user1
Java user home: C:\Users\user1
Java user dir: C:\DERBYDBS
java.specification.name: Java Platform API Specification
java.specification.version: 1.8
java.runtime.version: 1.8.0_05-b13
--------- Derby Information --------
[C:\db-derby-10.11.0.0-bin\lib\derby.jar] 10.11.0.0 - (2222222)
[C:\db-derby-10.11.0.0-bin\lib\derbytools.jar] 10.11.0.0 - (2222222)
[C:\db-derby-10.11.0.0-bin\lib\derbynet.jar] 10.11.0.0 - (2222222)
[C:\db-derby-10.11.0.0-bin\lib\derbyclient.jar] 10.11.0.0 - (2222222)
------------------------------------------------------
----------------- Locale Information -----------------
Current Locale : [English/United States [en_US]]
Found support for locale: [cs]
version: 10.11.0.0 - (2222222)
Found support for locale: [de_DE]
version: 10.11.0.0 - (2222222)
Found support for locale: [es]
version: 10.11.0.0 - (2222222)
Found support for locale: [fr]
version: 10.11.0.0 - (2222222)
Found support for locale: [hu]
version: 10.11.0.0 - (2222222)

58
Derby Tools and Utilities Guide
Found support for locale: [it]
version: 10.11.0.0 - (2222222)
Found support for locale: [ja_JP]
version: 10.11.0.0 - (2222222)
Found support for locale: [ko_KR]
version: 10.11.0.0 - (2222222)
Found support for locale: [pl]
version: 10.11.0.0 - (2222222)
Found support for locale: [pt_BR]
version: 10.11.0.0 - (2222222)
Found support for locale: [ru]
version: 10.11.0.0 - (2222222)
Found support for locale: [zh_CN]
version: 10.11.0.0 - (2222222)
Found support for locale: [zh_TW]
version: 10.11.0.0 - (2222222)
------------------------------------------------------

When you request help for a problem by posting to the derby-user mailing list, include a
copy of the information provided by the sysinfo utility.

Using sysinfo to check the classpath

sysinfo provides an argument (-cp) which can be used to test the classpath.

java org.apache.derby.tools.sysinfo -cp

[ [ embedded ][ server ][ client] [ tools ] [ anyClass.class ] ]

If your environment is set up correctly, the utility shows output indicating success.
You can provide optional arguments with -cp to test different environments. Optional
arguments to -cp are:
• embedded
• server
• client
• tools
• classname.class
If something is missing from your classpath, the utility indicates what is missing.
For example, if you neglected to include the directory containing the class named
SimpleApp in your classpath, the utility would indicate this when the following command
line was issued (enter all on one line):

$ java org.apache.derby.tools.sysinfo -cp embedded SimpleApp.class

FOUND IN CLASS PATH:

Derby embedded engine library (derby.jar)

NOT FOUND IN CLASS PATH:

user-specified class (SimpleApp)

(SimpleApp not found.)

59
Derby Tools and Utilities Guide

dblook
Use the dblook utility to view all or parts of the Data Definition Language (DDL) for a
given database.
To use the dblook utility, do one of the following:
• If you are relatively new to the Java programming language, follow the
instructions in "Setting up your environment" in Getting Started with Derby
to set the DERBY_HOME and JAVA_HOME environment variables and to add
DERBY_HOME/bin to your path. Then use the following command:

dblook -d connectionURL [options]

• If you are a regular Java user but are new to Derby, set the DERBY_HOME
environment variable, then use a java command to invoke the derbyrun.jar file
(all on one line):

(UNIX) java [options] -jar $DERBY_HOME/lib/derbyrun.jar dblook

-d connectionURL [options]

(Windows) java [options] -jar %DERBY_HOME%\lib\derbyrun.jar dblook

-d connectionURL [options]
• If you are familiar with both the Java programming language and Derby, you have
already set DERBY_HOME. Set your classpath to include the Derby jar files. Then
use a java command to invoke the dblook class directly.

java org.apache.derby.tools.dblook -d connectionURL [options]

Using dblook
The syntax for the command to launch the dblook utility is as follows.

dblook -d connectionURL [options]

The value for connectionURL is the complete URL for the database. Where appropriate,
the URL includes any connection URL attributes that might be required to access the
database. For complete information on connection URL attributes, see "Setting attributes
for the database connection URL" in the Derby Reference Manual.
For example, to connect to the database myDB, the URL would simply be
'jdbc:derby:myDB'. To connect using the Network Server to the database
'C:\private\tmp\myDB' on a remote server (port 1527), the URL would be:

'jdbc:derby://localhost:1527/
"C:\private\tmp\myDB";user=someusr;password=somepwd'

As with other Derby utilities, you must ensure that no other JVMs are started against the
database when you call the dblook utility, or an exception will occur and will print to the
dblook.log file. If this exception is thrown, the dblook utility will exit. To recover, you
must ensure that no other Derby applications running in a separate JVM are connected
to the source database. These connections need to be shut down. Once all existing
JVMs running against the database have been shut down, the dblook utility will execute
successfully.
You can also start the Derby Network Server and run the dblook utility as a client
application while other clients are connected to the server.

60
Derby Tools and Utilities Guide

dblook options
The dblook utility options include the following.
-z schemaName
Specifies the schema to which the DDL should be restricted. Only objects with the
specified schema are included in the DDL file.
-t tableOne tableTwo ...
Specifies the tables to which the DDL should be restricted. All tables with a name
from this list will be included in the DDL file subject to -z limitations, as will the DDL
for any keys, checks, or indexes on which the table definitions depend.
Additionally, if the statement text of any triggers or views includes a reference to
any of the listed table names, the DDL for that trigger/view will also be generated,
subject to -z limitations. If a table is not included in this list, then neither the table nor
any of its keys, checks, or indexes will be included in the final DDL. If this option is
not provided, all database objects will be generated, subject to -z limitations. Table
names are separated by whitespace.
-td
Specifies a statement delimiter for SQL statements generated by dblook. If a
statement delimiter option is not specified, the default is the semicolon (;). At the end
of each DDL statement, the delimiter is printed, followed by a new line.
-o filename
Specifies the file where the generated DDL is written. If this file is not specified, it
defaults to the console (that is, standard System.out).
-append
Prevents overwriting the DDL output (-o option, if specified) and dblook.log
files. If this option is specified, and execution of the dblook command leads to
the creation of files with names identical to existing files in the current directory,
dblook will append to the existing files. If this option is not set, the existing files will
be overwritten.
-verbose
Specifies that all errors and warnings (both SQL and internal to dblook) should be
echoed to the console (through System.err), in addition to being printed to the
dblook.log file. If this option is not set, the errors and warnings go only to the
dblook.log file.
-noview
Specifies that CREATE VIEW statements should not be generated.

Generating the DDL for a database

The dblook utility generates all of the following objects when generating the DDL for a
database.
• Checks
• Functions
• Indexes
• Jar files
• Keys (primary, foreign, and unique)
• Schemas

61
Derby Tools and Utilities Guide
• Stored procedures
• Triggers
• Tables
• Views
• Roles
• User-defined types
• User-defined aggregates
When dblook runs against a database that has jar files installed, it creates a new
directory, called DERBYJARS, within the current directory, where it keeps copies of all of
the jar files it encounters. In order to run the generated DDL as a script, this DERBYJARS
directory must either
• Exist within the directory in which it was created, or
• Be moved manually to another directory, in which case the path in the generated
DDL file must be manually changed to reflect to the new location
The dblook utility ignores any objects that have system schemas (for example, SYS),
since DDL is not able to directly create or modify system objects.

dblook examples
The following examples demonstrate how the various dblook utility options can be
specified from a command line. These examples use the sample database.
Note: The quotation marks shown in these examples are part of the command argument
and must be passed to dblook. The way in which quotation marks are passed depends
on the operating system and command line that you are using. With some systems it
might be necessary to escape the quotation marks by using a forward slash before the
quotation mark. For example:

"\"My Table"\"

Status messages are written to the output (either a -o filename, if specified, or the
console) as SQL script comments. These status messages serve as headers to show
which types of database objects are being, or have been, processed by the dblook
utility.
Writing the DDL to the console
You can write the DDL to the console for everything that is in the sample database. In
this example, the database is in the current directory. For example:

java org.apache.derby.tools.dblook -d jdbc:derby:sample

Including error and warning messages in the dblook command

You can write error and warning messages when you write the DDL to the console. The
messages are written using System.err. For example:

java org.apache.derby.tools.dblook -d jdbc:derby:sample -verbose

Writing the DDL to a file

You can write the DDL to a file called myDB_DDL.sql for everything that is in the
sample database. In this example, the database and file are in the current directory. For
example:

java org.apache.derby.tools.dblook -d jdbc:derby:sample -o myDB_DDL.sql

Specifying directory paths in the dblook command

62
Derby Tools and Utilities Guide
If the database or file is not in the current directory, you must specify the directory path.
For example:

java org.apache.derby.tools.dblook -d
'jdbc:derby:c:\private\stuff\sample'
-o 'C:\temp\newDB.sql'

Specifying a schema in the dblook command

You can specify the schema for the database. To write the DDL to the console, for all of
the objects in the sample database where the database is in the SAMP schema, use the
following command:

java org.apache.derby.tools.dblook -d jdbc:derby:sample -z samp

Specifying a remote database and host

If the sample database is in the SAMP schema on localhost:1527, you must specify
your user ID and password. For example, use the following command to write the DDL to
the console:

java org.apache.derby.tools.dblook
-d 'jdbc:derby://localhost:1527/"C:\temp\sample";
user=someusername;password=somepassword' -z samp

Specifying a schema and a table within the database in the dblook command
You can specify that only the objects in the sample database that are associated with
the SAMP and the My Table table are written to the console. For example:

java org.apache.derby.tools.dblook -d jdbc:derby:sample -z samp -t "My

Table"

Specifying multiple tables in the dblook command

You can specify more than one table in the dblook command by separating the names
of the tables with a space. For example, for objects in the sample database that
are associated with either the My Table table or the STAFF table, use the following
command:

java org.apache.derby.tools.dblook -d jdbc:derby:sample -t "My Table"

staff

Writing DDL to a file without a statement delimiter

To write the DDL for all of the objects in the sample database to the myDB_DDL.sql file
without a statement delimiter, you must omit the default semicolon. You can append the
DDL to the output files if the files are already there. For example:

java org.apache.derby.tools.dblook -d jdbc:derby:sample

-o myDB_DDL.sql -td '' -append

Excluding views from the DDL

To write the DDL to the console for all of the objects in the sample database except for
views, use the following command:

java org.apache.derby.tools.dblook -d jdbc:derby:sample -noview

63
Derby Tools and Utilities Guide

SignatureChecker
Use the SignatureChecker tool to identify any SQL functions and procedures in a
database that do not follow the SQL argument matching rules described in "Argument
matching" in the Derby Reference Manual.
If your application uses SQL functions and/or procedures, you should run this tool against
your databases.

Using SignatureChecker
Before you run the SignatureChecker tool, make sure that your classpath contains the
Derby jar files, including derbytools.jar.
On a Java SE platform, run the SignatureChecker tool as follows, where
connection-url-to-database is the connection URL you would use in order to obtain a
connection by calling DriverManager.getConnection():

java org.apache.derby.tools.SignatureChecker connection-url-to-database

Alternatively, you can invoke the tool using derbyrun.jar. For example:

java -jar derbyrun.jar SignatureChecker "jdbc:derby:myDB"

The tool examines every routine registered in the database and displays results like the
following:

Found a matching method for: "APP"."DOINSERT"( )

Found a matching method for: "APP"."DOINSERTANDCOMMIT"( )
Found a matching method for: "APP"."APPENDFOOANDBAR"( VARCHAR )
Unresolvable routine: "APP"."IDONTEXIST"( VARCHAR , INTEGER ).
Detailed reason: No method was found that matched the method call
z.iDontExist(java.lang.String, int),
tried all combinations of object and primitive types and any possible
type conversion for any parameters the method call may have.
The method might exist but it is not public and/or static, or the
parameter types are not method invocation convertible.
Found a matching method for: "APP"."RUNDDL"( VARCHAR )
Unresolvable routine: "APP"."TABFUNCDOESNTEXIST"( VARCHAR , BIGINT ).
Detailed reason: No method was found that matched the method call
org.apache.derbyTesting.functionTests.tests.lang.TableFunctionTest.
appendFooAndBar(java.lang.String, long),
tried all combinations of object and primitive types and any possible
type conversion for any parameters the method call may have.
The method might exist but it is not public and/or static, or the
parameter types are not method invocation convertible.

In the example above, the SignatureChecker tool found matches for all routines
except for the functions app.iDontExist and app.tabFuncDoesntExist. If the tool cannot
find a match for one of your functions or procedures, it tells you what signature it
expected to find. You need to adjust your application in one of the following ways:
• Method: Change the signature of your Java method to match the signature
suggested by the SignatureChecker tool.
• Routine: Drop and recreate your function or procedure so that its arguments and
return type match your Java method according to the SQL Standard rules described
in "Argument matching" in the Derby Reference Manual.

64
Derby Tools and Utilities Guide

PlanExporter
Use the PlanExporter tool to export query plan data for further analysis.
The query plan data can be exported in a variety of formats:
• XML, the base format for exported query plan data
• HTML, which helps you view graphically the execution plans of complex queries you
have executed
By using this tool, you can avoid querying XPLAIN style tables to get a basic idea of the
query plan followed by the optimizer.
You can specify other query plan export formats by specifying an appropriate XSL
stylesheet to transform the query plan data, or you can export the query plan data as
XML, then reformat it as appropriate using any external XML-aware tool of your choice.
Note: The PlanExporter tool is in an experimental stage. The Derby team welcomes
feedback on how to improve it.

Using PlanExporter
Before you run the PlanExporter tool, make sure that your classpath contains the
Derby jar files, including derbytools.jar/
Before you run the PlanExporter tool, you must capture the stmt_id of the query you
have executed from SYSXPLAIN_STATEMENTS system table. To do so, follow these
steps:
1. Use XPLAIN styles to capture the runtime statistics.
Refer to "SYSCS_UTIL.SYSCS_SET_XPLAIN_SCHEMA system procedure" in the
Derby Reference Manual to see how to do this.
Note: You must remember the schema_name.
2. Query the SYSXPLAIN_STATEMENTS system table to obtain the stmt_id of
the query you have executed.
Refer to "SYSXPLAIN_STATEMENTS system table" in the Derby Reference
Manual for information about the SYSXPLAIN_STATEMENTS system table.
You can run the tool as follows in the directory where your database is located (all on one
line).

java org.apache.derby.tools.PlanExporter derby_connection_URL

schema_name stmt_id options

The options can be passed according to your requirements. Consider the following
possible scenarios:
• To generate an XML file of the query plan, specify the following option:

-xml path

The path can be either absolute or relative. If the root filename does not have a
suffix, the tool appends .xml.
• To generate a plain HTML file of the query plan, you can use the default simple
style sheet provided with Derby. Specify the following option:

-html path

If the root filename does not have a suffix, the tool appends .html.

65
Derby Tools and Utilities Guide
To generate the XML file as well, specify the following options:

-xml path -html path

To use a different style sheet that does not contain any Javascript functions, specify
the following options:

-xsl path -html path

To generate the XML file as well, specify the following options:

-xml path -xsl path -html path

• To generate an advanced view of the query plan, you can use advanced XSL style
sheets provided with Derby inside
derbytools.jar/org/apache/derby/impl/tools/planexporter/
resources/, or you can specify a style sheet you created. To do this, specify the
following options:

-adv -xsl fileName -xml path

Note:
• Before you use the -adv feature, you must copy the advanced XSL style
sheet into the current directory. Thus, you must specify only the name of the
style sheet, not the path.
• Generating HTML is not supported when you use the -adv option of the
PlanExporter tool. But if you open the generated XML file in a web browser,
the browser will do the necessary transformation.

PlanExporter XML format

The PlanExporter tool extracts the query plan of an executed query as a XML
document by using the statistics captured from Derby XPLAIN style tables.
An XML document generated by the PlanExporter tool has the following structure.
• The basic tree structure:
• plan: The root of the XML tree
• statement: First child, the query executed
• time: Second child, the time that this query executed
• stmt_id : Third child, the STMT_ID of the query
• details: Fourth child, containing the query plan
• The statement element:
This element has only its value. That value implies the query executed, as retrieved
from the STMT_TEXT row of the SYSXPLAIN_STATEMENTS table.
For example:

<statement>select * from my_table</statement>

• The time element:
This element has only its value. That value implies the date and time
when the query executed, as retrieved from the XPLAIN_TIME row of the
SYSXPLAIN_STATEMENTS table.
For example:

<time>2010-07-13 14:27:59.405</time>
• The stmt_id element:

66
Derby Tools and Utilities Guide
This element has only its value. That value implies the statement ID of the query
executed, as retrieved from the STMT_ID row of the SYSXPLAIN_STATEMENTS
table.
For example:

<stmt_id>9ac8804c-0129-cc31-ca9a-00000047f1e8</stmt_id>
• The details element:
This element contains the query plan, as a tree structure of plan nodes.
For a particular query there is only one root plan node.
• A node element:
Contains the details of a plan node of the query plan. This element can contain zero
or many child elements of the same type (node elements).
This element contains one or more attributes, given that they are not null. The
possible attributes and their meanings are shown in the following table.
Table 5. Attributes of the node element

Attribute Name Meaning

name Name of the plan node
input_rows Retrieved from the INPUT_ROWS row of the
SYSXPLAIN_RESULTSETS system table
returned_rows Retrieved from the RETURNED_ROWS row of the
SYSXPLAIN_RESULTSETS system table
no_opens Retrieved from the NO_OPENS row of the
SYSXPLAIN_RESULTSETS system table
visited_pages Retrieved from the NO_VISITED_PAGES row of the
SYSXPLAIN_SCAN_PROPS system table
scan_qualifiers Retrieved from the SCAN_QUALIFIERS row of the
SYSXPLAIN_SCAN_PROPS system table
next_qualifiers Retrieved from the NEXT_QUALIFIERS row of the
SYSXPLAIN_SCAN_PROPS system table
scanned_object Retrieved from the SCAN_OBJECT_NAME row of the
SYSXPLAIN_SCAN_PROPS system table
scan_type Retrieved from the SCAN_TYPE row of the
SYSXPLAIN_SCAN_PROPS system table
sort_type Retrieved from the SORT_TYPE row of the
SYSXPLAIN_SORT_PROPS system table
sorter_output Retrieved from the NO_OUTPUT_ROWS row of the
SYSXPLAIN_SORT_PROPS system table

For example:

<node name="TABLESCAN" returned_rows="100000" no_opens="1"

visited_pages="2165" scan_qualifiers="None" scanned_object="USERS"
scan_type="HEAP">

PlanExporter example

67
Derby Tools and Utilities Guide
This example shows the steps that you must follow in order to use the PlanExporter
tool.
1. Move to the directory where your database was created.
2. Run the ij tool:

java org.apache.derby.tools.ij
3. Create a connection to the database:

CONNECT 'jdbc:derby:myDb;create=false';

Note: You can use a Derby client/server database as well.

4. Use XPLAIN styles:

CALL SYSCS_UTIL.SYSCS_SET_RUNTIMESTATISTICS(1);
CALL SYSCS_UTIL.SYSCS_SET_XPLAIN_SCHEMA('MY_SCHEMA');
select * from my_table;
CALL SYSCS_UTIL.SYSCS_SET_RUNTIMESTATISTICS(0);
CALL SYSCS_UTIL.SYSCS_SET_XPLAIN_SCHEMA('');
5. Obtain the stmt_id of the query:

select stmt_text, stmt_id from MY_SCHEMA.SYSXPLAIN_STATEMENTS;

exit;

Now find the stmt_id of the executed query in the displayed results and note it
down. It looks something like this:

9ac8804c-0129-cc31-ca9a-00000047f1e8
6. Run the PlanExporter tool in the same location:

java org.apache.derby.tools.PlanExporter jdbc:derby:myDb MY_SCHEMA

9ac8804c-0129-cc31-ca9a-00000047f1e8 -html plain_html;

This command uses the default style sheet provided with Derby, and the HTML
file will be generated at the same location, since the command does not specify a
different path. The name of the HTML file generated is plain_html.html.

68
Derby Tools and Utilities Guide

Optional tools
Derby supports optional tools, which you can load and unload by using the
SYSCS_UTIL.SYSCS_REGISTER_TOOL system procedure as described in the Derby
Reference Manual.

Using the databaseMetaData optional tool

The databaseMetaData optional tool creates functions and table functions
corresponding to most of the methods in the java.sql.DatabaseMetaData interface.
Before you run the databaseMetaData optional tool, make sure that your classpath
contains the Derby jar files, including derbytools.jar.
You can load and unload the databaseMetaData tool by using the
SYSCS_UTIL.SYSCS_REGISTER_TOOL system procedure. See the Derby Reference
Manual for information about this procedure.
To load the databaseMetaData tool, use the following statement:

call syscs_util.syscs_register_tool( 'databaseMetaData', true )

This command creates metadata functions and table functions in the current schema.
The functions and table functions have the same names as the corresponding
java.sql.DatabaseMetaData methods which they wrap. Once you have loaded this tool,
you can filter and join these functions to create powerful metadata queries. For instance,
the following query lists the column names and datatypes for all columns in tables
created by users:

select t.table_schem, t.table_name, c.column_name, c.type_name

from table( getTables( null, '%', '%' ) ) t,
table( getColumns( null, '%', '%', '%') ) c
where c.table_schem = t.table_schem
and c.table_name = t.table_name
and t.table_type = 'TABLE'
order by table_schem, table_name, column_name

A few DatabaseMetaData methods take array arguments. Because those arguments

cannot be represented as Derby types, the arguments are eliminated. This means that
the trailing types arguments to getTables() and getUDTs() have been eliminated. In
addition, the following DatabaseMetaData methods do not have corresponding metadata
routines:
• getRowIdLifetime() is eliminated because Derby does not provide an
implementation of java.sql.RowIdLifetime.
• getSchemas() is eliminated because Derby does not support overloads. The more
general getSchemas( String, String ) method is included.
• supportsConvert() is eliminated because Derby does not support overloads. The
more general supportsConvert( int, int ) is included.
When you have finished joining metadata results, you can drop this package of functions
and table functions as follows:

call syscs_util.syscs_register_tool( 'databaseMetaData', false )

Using the foreignViews optional tool

69
Derby Tools and Utilities Guide
The foreignViews optional tool creates schemas, table functions, and convenience
views for all user tables in a foreign database. This can be useful for bulk-importing
foreign data.
Before you run the foreignViews optional tool, make sure that your classpath contains
the Derby jar files, including derbytools.jar.
You can load and unload the foreignViews tool by using the
SYSCS_UTIL.SYSCS_REGISTER_TOOL system procedure. See the Derby Reference
Manual for information about this procedure.
To load the foreignViews tool, use a statement like the following:

call syscs_util.syscs_register_tool( 'foreignViews', true,

'foreignDatabaseURL', 'XYZ_' )

The two trailing arguments have the following meanings:

• foreignDatabaseURL is a URL suitable for creating a connection to the foreign
database by calling java.sql.DriverManager.getConnection(). For example:

'jdbc:derby:db3;user=fred;password=fredpassword'
• 'XYZ_' is a string prefixed to the names of all schemas created by this tool. This
argument may be omitted. If it is omitted, the tool will create schemas which have
the same names as the schemas in the foreign database.
For example, suppose that the foreign database has two schemas, S1 and S2. S1
contains two user tables, T1 and T2. S2 contains two user tables, U1 and U2. Loading
the tool as shown above will create the following objects in your Derby database:
schema XYZ_S1
table function XYZ_S1.T1, which reads S1.T1 from the foreign database
table function XYZ_S1.T2, which reads S1.T2 from the foreign database
view XYZ_S1.T1, which wraps the corresponding table function
view XYZ_S1.T2, which wraps the corresponding table function
schema XYZ_S2
table function XYZ_S2.U1, which reads S2.U1 from the foreign database
table function XYZ_S2.U2, which reads S2.U2 from the foreign database
view XYZ_S2.U1, which wraps the corresponding table function
view XYZ_S2.U2, which wraps the corresponding table function
The views hide the arguments to the table functions. You can then populate your local
schema by using the following SELECT statements:

insert into S1.T1 select * from XYZ_S1.T1

insert into S1.T2 select * from XYZ_S1.T2
insert into S2.U1 select * from XYZ_S2.U1
insert into S2.U2 select * from XYZ_S2.U2

When you have finished bulk-importing the foreign data, you can drop this package of
schemas, table functions and views as follows:

call syscs_util.syscs_register_tool( 'foreignViews', false,

'foreignDatabaseURL', 'XYZ_' )

Using the luceneSupport optional tool

The luceneSupport plugin is an optional tool that lets you use Apache Lucene to
perform full-text indexing and searching of the contents of Derby text columns.

70
Derby Tools and Utilities Guide
The mainline API documentation for Apache Lucene at
https://builds.apache.org/job/Lucene-Artifacts-trunk/javadoc/ is a useful starting point for
understanding Lucene's capabilities.
Note: The luceneSupport plugin can be used only after a database has been fully
upgraded to Derby Release 10.11 or higher. (See "Upgrading a database" in the Derby
Developer's Guide for more information.) The plugin cannot be used on a database that
is at Release 10.10 or lower.
Terminology
The following concepts are important to an understanding of the luceneSupport plugin.
• Analyzer: An analyzer is an implementation of
org.apache.lucene.analysis.Analyzer. It extracts indexable terms from a
block of text. The same analyzer should be used to index the text and to query it. An
analyzer may perform language-specific tasks such as stemming and filtering. More
information on analyzers can be found in the Lucene API documentation. Users can
extend the existing Lucene analyzers or write their own custom analyzers.
• Filtering: Filtering is the language-specific task of throwing away insignificant words
such as articles and conjunctions.
• Query-parsing: Query-parsing is the process of interpreting a Lucene query
string. Lucene has its own query language. By extending the default Lucene
QueryParser class, users can enhance the Lucene query language or replace it
with some other query language.
• Score: The score measures how well a query matches a block of text (a text
column value). The higher the score, the better the match. The score is a float
value. There is no minimum or maximum value.
• Stemming: Stemming is the language-specific task of reducing related words to
their common root. For instance, an English stemmer might map all of the following
words onto the common root "house": "house", "houses", "housed", and "housing".
Classpath for running the luceneSupport optional tool
Before you run the luceneSupport optional tool, make sure that your
classpath/modulepath contains the following jar files:
• derbyshared.jar
• derbytools.jar
• derby.jar
• derbyoptionaltools.jar
• core: The core Lucene machinery. For Lucene 4.5.0, this is
lucene-core-4.5.0.jar.
• analyzers-common: The common Lucene analyzers. For Lucene 4.5.0, this is
lucene-analyzers-common-4.5.0.jar.
• queryparser: The basic Lucene logic for query-parsing. For Lucene 4.5.0, this is
lucene-queryparser-4.5.0.jar.
The Lucene jar files are included in the Derby source tree; alternatively, you can
download them from http://lucene.apache.org/.
Loading and unloading the luceneSupport optional tool
In a database protected by SQL authorization, only the database owner can issue the
commands which load and unload the Lucene plugin. (See "Database Owner" in the
Derby Security Guide for more information.)
Loading the plugin looks very much like loading any other optional tool. You call the
SYSCS_UTIL.SYSCS_REGISTER_TOOL system procedure in a statement like the
following:

71
Derby Tools and Utilities Guide
call syscs_util.syscs_register_tool( 'luceneSupport', true );

This command creates the LUCENESUPPORT schema, which contains the following
objects:
• CREATEINDEX: A database procedure for indexing Derby text columns. See
Creating an index for details.
• UPDATEINDEX: A database procedure for refreshing an index built by
CREATEINDEX. See Updating an index for details.
• DROPINDEX: A database procedure for dropping an index built by CREATEINDEX.
See Dropping an index for details.
• LISTINDEXES: A table function for listing the indexes created by CREATEINDEX.
See Listing indexes for details.
Removing the plugin also looks much like unloading other optional tools. Call the
SYSCS_UTIL.SYSCS_REGISTER_TOOL system procedure in a statement like the
following:

call syscs_util.syscs_register_tool( 'luceneSupport', false );

This command does the following:

• Drops Lucene directories: Deletes the directories which were created to hold the
Lucene indexes
• Drops schema objects: Drops all schema objects created by CREATEINDEX
commands
• Drops LUCENESUPPORT: Drops the LUCENESUPPORT schema and all schema
objects which it contains
See the Derby Reference Manual for information about the
SYSCS_UTIL.SYSCS_REGISTER_TOOL system procedure.
Encryption and the luceneSupport tool
The luceneSupport tool may not be used on an encrypted database. Users who need
full-text indexing of encrypted data should store the database in an encrypted directory or
on an encrypted device.
Lucene versions
The Derby community has tested the luceneSupport tool against the following
versions of Lucene. Other versions of Lucene may or may not work.
• 4.5.0
• 4.7.1
• 4.8.1
• 4.9.0
Derby cannot make any guarantees about the compatibility of two different versions of
Lucene. Users should bear the following in mind:
• No time travel: Derby will raise an error if you try to use an earlier version of
Lucene to read an index created by a later version of Lucene.
• Bounce your indexes: When you change versions of Lucene, it is always safest to
call LUCENESUPPORT.UPDATEINDEX on all of your existing Lucene indexes (see
Updating an index).

Creating an index
The luceneSupport optional tool lets you use Apache Lucene to perform full-text
indexing and searching of the contents of Derby text columns.

72
Derby Tools and Utilities Guide
After the luceneSupport tool has been loaded, a user can index a text column in a
table or view which that user owns. If SQL authorization is enabled, then the database
owner is the only account which can index a text column in another user's table. The
following procedure makes this possible:

LUCENESUPPORT.CREATEINDEX
(
SCHEMANAME VARCHAR( 128 ),
TABLENAME VARCHAR( 128 ),
TEXTCOLUMN VARCHAR( 128 ),
INDEXDESCRIPTORMAKER VARCHAR( 32672 ),
KEYCOLUMNS VARCHAR( 32672 ) ...
)

The procedure parameters are as follows:

• SCHEMANAME: The SQL identifier of the schema which holds the table or view. This
argument is case-insensitive unless you double-quote it.
• TABLENAME: The SQL identifier of the table or view (also case-insensitive).
• TEXTCOLUMN: The SQL identifier of the text column being indexed (also
case-insensitive). The column must have a character datatype.
• INDEXDESCRIPTORMAKER: If the argument is not null, this is the
full name of a zero-argument static, public method which creates
an org.apache.derby.optional.api.IndexDescriptor.
If the argument is null, the index is created
using the default maker method,
org.apache.derby.optional.api.LuceneUtils.defaultIndexDescriptor.
An org.apache.derby.optional.api.IndexDescriptor specifies the
following:
• The analyzer to use when parsing text into indexable terms
• The names of the indexed fields which can be queried later on
• The subclass of
org.apache.lucene.queryparser.classic.QueryParser which
should be used when querying the index later on
The default org.apache.derby.optional.api.IndexDescriptor
supplies one field name (luceneTextField) along with an instance of
org.apache.lucene.queryparser.classic.MultiFieldQueryParser
as its QueryParser. In addition, the default
org.apache.derby.optional.api.IndexDescriptor attempts to find a
Lucene-supplied analyzer matching the default language of the database. Matches
are found for the languages listed in the following table. Note that the Chinese
analyzer was deprecated, so for Chinese, the plugin uses the StandardAnalyzer
instead.
Table 6. Language codes supported by the Lucene plugin

Language Language Code

Arabic ar
Armenian hy
Basque eu
Brazilian br
Bulgarian bg
Catalan ca
Czech cz

73
Derby Tools and Utilities Guide

Language Language Code

Danish da
Dutch nl
English en
Finnish fi
French fr
Galician gl
German de
Greek el
Hindi hi
Hungarian hu
Indonesian id
Irish ga
Italian it
Latvian lv
Norwegian no
Persian fa
Portuguese pt
Romanian ro
Russian ru
Spanish es
Swedish sv
Thai th
Turkish tr

Derby supplies another utility method which instantiates

the default Lucene analyzer; this utility method is called
org.apache.derby.optional.api.LuceneUtils.standardAnalyzer,
and it materializes an
org.apache.lucene.analysis.standard.StandardAnalyzer.
• KEYCOLUMNS: This is an optional list of SQL identifiers for other columns in the
table or view. The values of these columns are stored in the text index for use in
joining Lucene results back to the original data. If the KEYCOLUMNS are omitted,
TABLENAME must identify a base table with a primary key; in this case, the whole
primary key is stored in the text index for joining later.
The keys and the text column cannot have the following names:
• DOCUMENTID
• SCORE
CREATEINDEX creates a table function named $TABLENAME__$TEXTCOLUMN in the
$SCHEMANAME schema. Querying an index describes this table function in greater detail.
Example

74
Derby Tools and Utilities Guide
-- index the POEMTEXT column of the POEMS table,
-- using its primary key and the default IndexDescriptor maker
CALL LUCENESUPPORT.CREATEINDEX( 'ruth', 'poems', 'poemText', null );

-- index the POEMVIEW view, using POEMID and VERSIONSTAMP as keys

-- and a custom IndexDescriptor
CALL LUCENESUPPORT.CREATEINDEX
(
'ruth', 'poemView', 'poemText',
'myapp.MyIndexDescriptor.makeMe',
'poemID', 'versionStamp'
);

Updating an index
After an index has been created, a user can perform a bulk reindexing of the text column.
If SQL authorization is enabled, the database owner is the only account which can
reindex a text column in another user's table. The following procedure reindexes the
column across the whole table:

LUCENESUPPORT.UPDATEINDEX
(
SCHEMANAME VARCHAR( 128 ),
TABLENAME VARCHAR( 128 ),
TEXTCOLUMN VARCHAR( 128 ),
INDEXDESCRIPTORMAKER VARCHAR( 32672 )
)

The first three arguments identify the column to be reindexed. The last argument lets you
override how the text is indexed and how queries are parsed.
This release of the luceneSupport tool does not support the incremental reindexing of
data. Updating the index is a bulk operation, which reindexes an entire data set. For this
reason, this release of the luceneSupport tool is not appropriate for update-intensive
applications where the results of full-text queries must be current. The luceneSupport
tool is better suited to applications for which yesterday's full-text query results are good
enough:
• Read-mostly: Applications which analyze static text data
• Fuzzy: Applications which can perform a bulk reindexing of the text data periodically
(for example, once a day), and which can tolerate that amount of fuzziness in query
results
Example

-- reindex a column using a custom analyzer

CALL LUCENESUPPORT.UPDATEINDEX
(
'ruth', 'poemView', 'poemText',
'myapp.MyIndexDescriptor.makeMe',
);

Querying an index
To query an index, use the table function created by CREATEINDEX.
The table function created by CREATEINDEX has the following shape:

$SCHEMANAME.$TABLENAME__TEXTCOL
(
QUERY VARCHAR( 32672 ),
WINDOWSIZE INT,
SCORECEILING REAL

75
Derby Tools and Utilities Guide
)
RETURNS TABLE
(
$keyColumn1 $keyColumn1datatype,
...
$keyColumnN $keyColumnNdatatype,
DOCUMENTID INT,
SCORE REAL
)

The arguments have the following meaning:

• QUERY: This is the Lucene query text. For more information, see the description of
the Lucene query language.
• WINDOWSIZE: This is the maximum number of rows (matches) to return.
• SCORECEILING: This causes Lucene to return only rows whose score is less than
this number. WINDOWSIZE and SCORECEILING are the variables which Lucene
uses to process a result into windows. See the example below. A value of NULL
means "return the best WINDOWSIZE matches".
Remember that when the index was created, the application specified how the query
should be parsed.
In the returned result set, the key columns join back to the original table or view, and
they identify which row of that table/view holds the scored text. The other columns in the
returned result set have the following meanings:
• DOCUMENTID: This is a Lucene-generated number which may be useful for
debugging Lucene-related issues. This number has no meaning to Derby or to the
end user.
• SCORE: This value measures how well Lucene thought the column fit the query. A
higher score means a better fit.
Derby uses the same analyzer to query the index that was last used to create or update
the index.
Example

-- Selects the primary key and score for the best 3 matches for
-- the text.
select presidentID, speechID, score
from table
(
us.presidentsSpeeches__speechText
(
'When in the course of human events',
3,
null
)
) t;

-- The last row in the previous result had score 1.0.

-- This selects the primary key and score for the next 4 matches for the
-- text.
select presidentID, speechID, score
from table
(
us.presidentsSpeeches__speechText
(
'When in the course of human events',
4,
1.0
)
) t;

76
Derby Tools and Utilities Guide

Dropping an index
A Lucene index can be dropped by the table owner.
If SQL authorization is enabled, the database owner is the only account which can drop
an index on another user's table. The following procedure makes this possible:

LUCENESUPPORT.DROPINDEX
(
SCHEMANAME VARCHAR( 128 ),
TABLENAME VARCHAR( 128 ),
TEXTCOLUMN VARCHAR( 128 )
)

The arguments are the same as those for CREATEINDEX. See Creating an index for
details.
Example

-- drop an index
CALL LUCENESUPPORT.DROPINDEX
(
'ruth', 'poemView', 'poemText'
);

Listing indexes
You can use a table function to list all Lucene indexes.
After the luceneSupport tool has been loaded, anyone can list the Lucene indexes by
selecting from the following table function:

LUCENESUPPORT.LISTINDEXES()
RETURNS TABLE
(
SCHEMANAME VARCHAR( 128 ),
TABLENAME VARCHAR( 128 ),
COLUMNNAME VARCHAR( 128 ),
LASTUPDATED TIMESTAMP,
LUCENEVERSION VARCHAR( 20 ),
ANALYZER VARCHAR( 32672 ),
INDEXDESCRIPTORMAKER VARCHAR( 32672 )
)

Example

-- list all the indexes

SELECT * FROM TABLE( LUCENESUPPORT.LISTINDEXES() ) T;

Using the simpleJson optional tool

The simpleJson optional tool creates functions and a user-defined type, which can be
used to integrate relational data with data represented in the popular JSON format.
The simpleJson optional tool relies on support classes provided by
the third party JSON.simple jar file. That jar file can be obtained from
http://code.google.com/p/json-simple/. Before loading the simpleJson tool, make
sure that your classpath contains this third party jar file as well as derby.jar and
derbyoptionaltools.jar. The simpleJson tool has been tested with version 1.1 of
JSON.simple (json_simple-1.1.jar).
You can load and unload the simpleJson tool by using the
SYSCS_UTIL.SYSCS_REGISTER_TOOL system procedure. See the Derby Reference
Manual for information about this procedure.

77
Derby Tools and Utilities Guide
To load the simpleJson tool, use the following statement:

call syscs_util.syscs_register_tool( 'simpleJson', true )

This command creates a JSONArray user-defined type in the current schema.

That type is bound to the JSON array abstraction provided by JSON.simple
(org.json.simple.JSONArray). The registration command also creates the following
functions in the current schema. Javadoc for these functions can be found in the public
API for org.apache.derby.optional.api.SimpleJsonUtils:
• readArrayFromString() - This function turns a JSON document string into a
JSONArray value.
• readArrayFromFile() - This function reads a JSON document stored in a file and
turns that document into a JSONArray value.
• readArrayFromURL() - This function reads a JSON document from an URL and
turns that document into a JSONArray value.
• arrayToClob() - This function turns a JSONArray value into a Clob so that it can be
inserted into a text column.
These functions have the following signatures:

create function readArrayFromString( document varchar( 32672 ) )

returns JSONArray
language java parameter style java contains sql
external name
'org.apache.derby.optional.api.SimpleJsonUtils.readArrayFromString'

create function readArrayFromFile

( fileName varchar( 32672 ), characterSetName varchar( 100 ) )
returns JSONArray
language java parameter style java contains sql
external name
'org.apache.derby.optional.api.SimpleJsonUtils.readArrayFromFile'

create function readArrayFromURL

( urlString varchar( 32672 ), characterSetName varchar( 100 ) )
returns JSONArray
language java parameter style java contains sql
external name
'org.apache.derby.optional.api.SimpleJsonUtils.readArrayFromURL'

create function arrayToClob( jsonDocument JSONArray ) returns clob

language java parameter style java no sql
external name 'org.apache.derby.optional.api.SimpleJsonUtils.arrayToClob'

The first three functions can then be used to turn JSON documents into tabular data sets
using org.apache.derby.optional.api.SimpleJsonVTI. That class is documented in Derby's
public api too. Using this technique, you can join JSON data with other relational data.
You can also exploit this technique to import JSON data into Derby tables. Here's an
example of how to use these functions to import data:

create function thermostatReadings( jsonDocument JSONArray )

returns table
(
"id" int,
"temperature" float,
"fanOn" boolean
)
language java parameter style derby_jdbc_result_set contains sql
external name 'org.apache.derby.optional.api.SimpleJsonVTI.readArray';

insert into thermostatReadings

select * from table
(

78
Derby Tools and Utilities Guide
thermostatReadings
(
readArrayFromURL( 'https://thermostat.feed.org', 'UTF-8' )
)
) t;

After running that query, the contents of the target table might look something like this:

id |temperature |fanOn
------------------------------------------
1 |70.3 |true
2 |65.5 |false

The simpleJson tool declares one more function:

• toJSON() - This function turns a query result into a JSONArray value.
This function has the following signature:

create function toJSON

(
queryString varchar( 32672 ),
queryArgs varchar( 32672 ) ...
)
returns JSONArray
language java parameter style derby reads sql data
external name 'org.apache.derby.optional.json.SimpleJsonTool.toJSON

toJSON() prepares the query, plugs the optional queryArgs into the query's ?
parameters, executes the query, and returns the results packed into a JSONArray. Here's
an example of how to use this function:

values( toJSON( 'select * from thermostatReadings where "id" = ?', '1' )

);

That statement returns a JSONArray which looks something like this:

[
{ "id": 1, "temperature": 70.3, "fanOn": true }
]

The tool can be unloaded via the following command. This command drops the
JSONArray type and all of the functions discussed above:

call syscs_util.syscs_register_tool( 'simpleJson', false )

Using the rawDBReader optional tool

The rawDBReader optional tool creates functions and views, which can be used to
extract data out of a corrupt or unbootable database into a new, healthy database.
Overview
Derby is a stable, well-tested database engine. Nevertheless, it is possible for a Derby
database to become corrupt. If a Derby database becomes corrupt but remains bootable
(for instance, a single index becomes inconsistent), then the damage may be located
by querying the SYSCS_UTIL.SYSCS_CHECK_TABLE system table function and the
damage may be repaired by running the SYSCS_UTIL.SYSCS_COMPRESS_TABLE
system procedure. These tools are documented in the Derby Developer's Guide.
However, if the database is unbootable, then the best approach is to restore the
database from a recent backup. If a backup isn't available, then you may be able to

79
Derby Tools and Utilities Guide
extract some data out of the corrupt database by using the rawDBReader optional tool.
The rawDBReader tool is not guaranteed to retrieve all of the data. In some situations,
the tool may retrieve data which was deleted before the database became unbootable.
The rawDBReader optional tool is a last resort to salvage something.
When running the rawDBReader tool, you will work with two databases. Both of these
databases must be on the machine where you are running the tool.
• corruptDB - This is the corrupt or unbootable database whose data you are trying
to salvage.
• healthyDB - This is a new database which you create in order to hold the retrieved
data.
The rawDBReader tool works by copying all of your user data from the corrupt database
into a totally separate, healthy database. Each table in the corrupt database will be
copied to a fresh table in the healthy database. The healthy target table will have the
same schema name, the same table name, and the same column names as the original,
corrupt table.
There are three steps to using rawDBReader:
• load - You call SYSCS_REGISTER_TOOL with arguments specific to your
situation. This will prepare the healthy database to accept data from the corrupt
database. This will also generate a text file containing a series of commands. This is
the recovery script.
• extract - You then run the recovery script in order to retrieve your data from the
corrupt database and copy the data into the healthy database.
• unload - Finally, you can remove the tool via another call to
SYSCS_REGISTER_TOOL.
These steps are described in greater detail below.
Loading the tool
To run the rawDBReader tool, you must be signed on to the machine where the
corrupt database resides. Your classpath must contain derby.jar, derbytools.jar, and
derbyoptionaltools.jar.
To load the rawDBReader tool, connect to the healthy database and issue the following
statement:

call syscs_util.syscs_register_tool
(
'rawDBReader',
true,
$recoveryScript,
$controlSchema,
$schemaPrefix,
$corruptDBPath,
$corruptEncryptionAttributes,
$corruptDatabaseOwner,
$corruptDatabaseOwnerPassword
);

Where the arguments have these meanings:

• $recoveryScript - The name of a file into which a recovery script will be written.
• $controlSchema - The name of a schema which will be created in the healthy
database and which will hold table functions and views for querying the core
catalogs of the corrupt database.
• $schemaPrefix - A string which will be prefixed to the names of user schemas
which will be created in the healthy database. For every schema in the corrupt
database, a corresponding schema will be created in the healthy database. These

80
Derby Tools and Utilities Guide
schemas will hold functions and views which can be used to extract data out of the
corrupt database.
• $corruptDBPath - The file path to the corrupt database directory.
• $corruptEncryptionAttributes - The encryption directives with which the corrupt
database was created. May be null.
• $corruptDatabaseOwner - The name of the owner of the corrupt database.
• $corruptDatabaseOwnerPassword - The password of the owner of the corrupt
database. May be null.
The schema prefix is just a tag which helps the tool create unique schema names that
won't conflict with the names of user schemas. The control schema is a separate schema
whose name should not conflict with any user schemas. If the corrupt database has the
following user schemas...

S1
S2

...then the healthy database will have the following schemas after loading the
rawDBReader tool and after running the recovery script:

S1
S2
$controlSchema
$schemaPrefixS1
$schemaPrefixS2

For instance, if the corrupt database was created without encryption and without
specifying a database owner, then the following command would load the rawDBReader
optional tool:

call syscs_util.syscs_register_tool
(
'rawDBReader',
true,
'recoverMyData.sql',
'CONTROL',
'BAD_',
'tmpdbs/corruptDB',
null,
'APP',
null
);

If, on the other hand, the corrupt database was created with encryption and with
credentials for a database owner, then you would load the tool with a command like the
following statement:

call syscs_util.syscs_register_tool
(
'rawDBReader',
true,
'recoverMyData.sql',
'CONTROL',
'BAD_',
'tmpdbs/corruptDB',
'bootPassword=DBpassword',
'dbo',
'DBO_password'
);

Running the recovery script

81
Derby Tools and Utilities Guide
Loading the tool will write a recovery script containing statements which will create
schemas and tables in the healthy database. The schemas and tables correspond to the
user schemas and tables in the corrupt database. The script will also contain statements
which extract data out of the corrupt tables into their healthy counterparts. Here's a
sample recovery script:

connect 'jdbc:derby:tmpdbs/healthyDB';

create schema "S1";

-- siphon data out of c490.dat

create table "S1"."T1" as select * from "BAD_S1"."T1" with no data;
insert into "S1"."T1" select * from "BAD_S1"."T1";

create schema "S2";

-- siphon data out of c4a0.dat

create table "S1"."T2" as select * from "BAD_S1"."T2" with no data;
insert into "S1"."T2" select * from "BAD_S1"."T2";

-- siphon data out of c4b0.dat

create table "S2"."T1" as select * from "BAD_S2"."T1" with no data;
insert into "S2"."T1" select * from "BAD_S2"."T1";

-- siphon data out of c4c0.dat

create table "S2"."T2" as select * from "BAD_S2"."T2" with no data;
insert into "S2"."T2" select * from "BAD_S2"."T2";

Unloading the tool

You can unload the tool after you have run the recovery script and copied data out of the
corrupt database into the healthy database. Note that you must specify the same control
schema and schema prefix which you specified when you loaded the tool:

call syscs_util.syscs_register_tool
(
'rawDBReader',
false,
'CONTROL',
'BAD_'
);

82
Derby Tools and Utilities Guide

Trademarks
The following terms are trademarks or registered trademarks of other companies and
have been used in at least one of the documents in the Apache Derby documentation
library:
Cloudscape, DB2, DB2 Universal Database, DRDA, and IBM are trademarks of
International Business Machines Corporation in the United States, other countries, or
both.
Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft
Corporation in the United States, other countries, or both.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names
may be trademarks of their respective owners.
UNIX is a registered trademark of The Open Group in the United States and other
countries.
Other company, product, or service names may be trademarks or service marks of
others.

Dimetra IP System Overview
100% (1)
Dimetra IP System Overview
201 pages
Advance Java Unit 1
No ratings yet
Advance Java Unit 1
14 pages
So You Wanna Be A Producer
100% (1)
So You Wanna Be A Producer
78 pages
Victorious Roleplayinggame PDF
No ratings yet
Victorious Roleplayinggame PDF
146 pages
Derby Server and Administration Guide: Derby Document Build: November 28, 2012, 7:41:33 PM (UTC)
No ratings yet
Derby Server and Administration Guide: Derby Document Build: November 28, 2012, 7:41:33 PM (UTC)
103 pages
52, 53 SMU MBA Assignment IV Sem
No ratings yet
52, 53 SMU MBA Assignment IV Sem
119 pages
Java DB Tools and Utilities Guide: Derby Document Build: April 21, 2008, 12:35:02 PM (EDT)
No ratings yet
Java DB Tools and Utilities Guide: Derby Document Build: April 21, 2008, 12:35:02 PM (EDT)
75 pages
Swift MT
No ratings yet
Swift MT
287 pages
LVL 3 Forsaken Labyrinth of The Golden Baron v1.0
0% (1)
LVL 3 Forsaken Labyrinth of The Golden Baron v1.0
7 pages
Studio RM 2.0 Release Notes
No ratings yet
Studio RM 2.0 Release Notes
39 pages
The Demonplague Part III - Icefall
100% (1)
The Demonplague Part III - Icefall
110 pages
ZetCode Apache Derby Tutorial
No ratings yet
ZetCode Apache Derby Tutorial
68 pages
RF Guia Do Mundo - 5edab30fdec61
100% (4)
RF Guia Do Mundo - 5edab30fdec61
402 pages
Derby Tools and Utilities Guide: Derby Document Build: August 10, 2009, 1:04:43 PM (PDT)
No ratings yet
Derby Tools and Utilities Guide: Derby Document Build: August 10, 2009, 1:04:43 PM (PDT)
77 pages
PCAR Part 1 Summary
50% (2)
PCAR Part 1 Summary
6 pages
Sample Questions LLM 13.02.2024
100% (1)
Sample Questions LLM 13.02.2024
23 pages
19 JDBC
No ratings yet
19 JDBC
36 pages
Apache Derby A Jug Presentation
No ratings yet
Apache Derby A Jug Presentation
18 pages
Derby Server and Administration Guide: Derby Document Build: August 10, 2009, 1:00:19 PM (PDT)
No ratings yet
Derby Server and Administration Guide: Derby Document Build: August 10, 2009, 1:00:19 PM (PDT)
73 pages
Java Group 1
No ratings yet
Java Group 1
13 pages
Derby Backup
No ratings yet
Derby Backup
17 pages
Apache Derby Database
No ratings yet
Apache Derby Database
4 pages
Apache Derby Tutorial PDF
0% (1)
Apache Derby Tutorial PDF
15 pages
Odbcjdbc
No ratings yet
Odbcjdbc
12 pages
Derby Plugins Slides
No ratings yet
Derby Plugins Slides
9 pages
Working With The Java DB (Derby) Database - NetBeans IDE Tutorial
No ratings yet
Working With The Java DB (Derby) Database - NetBeans IDE Tutorial
7 pages
Progress JDBC Driver Guide
No ratings yet
Progress JDBC Driver Guide
72 pages
Industrial Protocols Manual
No ratings yet
Industrial Protocols Manual
134 pages
ANSYS Mechanical APDL Structural Analysis Guide
No ratings yet
ANSYS Mechanical APDL Structural Analysis Guide
520 pages
Task 1: Get Familiar With Java DB by Using Netbeans: PDC Lab: JDBC
No ratings yet
Task 1: Get Familiar With Java DB by Using Netbeans: PDC Lab: JDBC
4 pages
Advanced Players Guide Errata
100% (1)
Advanced Players Guide Errata
5 pages
Derby-Database: Notice That Multiple Entries in The Class Path Are Separated by A Semicolon ( ) On Windows
No ratings yet
Derby-Database: Notice That Multiple Entries in The Class Path Are Separated by A Semicolon ( ) On Windows
3 pages
PTP 850 User Guide - PHN 4969 - 000v001
No ratings yet
PTP 850 User Guide - PHN 4969 - 000v001
560 pages
Java Database
No ratings yet
Java Database
124 pages
10 JDBC
No ratings yet
10 JDBC
35 pages
JDBC-Basic Beginner Guidance
No ratings yet
JDBC-Basic Beginner Guidance
80 pages
JDBC
No ratings yet
JDBC
9 pages
Mumbai High Court PDF
No ratings yet
Mumbai High Court PDF
87 pages
MOC 20687C ENU Companion
No ratings yet
MOC 20687C ENU Companion
184 pages
Cloud Csa Us Eng v040119
No ratings yet
Cloud Csa Us Eng v040119
8 pages
CO 2024 LS Grade7 CUF TLE Q1 W8 R, P, V, H
No ratings yet
CO 2024 LS Grade7 CUF TLE Q1 W8 R, P, V, H
13 pages
FTSE All-World High Dividend Yield Index
No ratings yet
FTSE All-World High Dividend Yield Index
16 pages
HB264-Gourmet Bottle Bill
No ratings yet
HB264-Gourmet Bottle Bill
8 pages
368 Friends: A Dramatic Monologue
0% (1)
368 Friends: A Dramatic Monologue
4 pages
T & C For Flats
No ratings yet
T & C For Flats
5 pages
Political and Legal Environment (Ch. 5)
No ratings yet
Political and Legal Environment (Ch. 5)
6 pages
Programming Questions-1
No ratings yet
Programming Questions-1
33 pages
Psychiatry Review and Canadian Certification Exam Preparation Guide 1st Edition James A. Bourgeois & Usha Parthasarathi & Ana Hategan
No ratings yet
Psychiatry Review and Canadian Certification Exam Preparation Guide 1st Edition James A. Bourgeois & Usha Parthasarathi & Ana Hategan
41 pages
WASH Child Health India
No ratings yet
WASH Child Health India
7 pages
Graphic Era Deemed To Be University
No ratings yet
Graphic Era Deemed To Be University
42 pages
Infosys Written and Interviews Sheet
No ratings yet
Infosys Written and Interviews Sheet
4 pages
MySQL DAY 6
No ratings yet
MySQL DAY 6
9 pages
Greek and Roman Military Manuals Chlup James T Whately Conor Download
No ratings yet
Greek and Roman Military Manuals Chlup James T Whately Conor Download
22 pages
Industrial
No ratings yet
Industrial
10 pages
Dwarka Prasad Laxmi Narain v. State of U.P., (1954) S.C.R. 803
No ratings yet
Dwarka Prasad Laxmi Narain v. State of U.P., (1954) S.C.R. 803
15 pages
Conflict Resolution Styles and Skills and Variation Among Medical Students
No ratings yet
Conflict Resolution Styles and Skills and Variation Among Medical Students
9 pages
Programming Questions
No ratings yet
Programming Questions
6 pages
Nature Patenting Vs Publishing Dilemma
No ratings yet
Nature Patenting Vs Publishing Dilemma
4 pages
1 - SE Introduction
No ratings yet
1 - SE Introduction
9 pages
Setting Nutritional Laboratory
No ratings yet
Setting Nutritional Laboratory
5 pages
Boundaries, Baby: How to Say ‘No’ and Still Be a Rockstar Educator,”
From Everand
Boundaries, Baby: How to Say ‘No’ and Still Be a Rockstar Educator,”
Thomas Grey
No ratings yet
TINY SHIFTS, BIG RESULTS: How Small Habits Shape Who You Become and Transform Your Life: How Small Habits Shape Who You Become and Transform Your Life: How Small Habits Shape Who You Become and Transform Your Life
From Everand
TINY SHIFTS, BIG RESULTS: How Small Habits Shape Who You Become and Transform Your Life: How Small Habits Shape Who You Become and Transform Your Life: How Small Habits Shape Who You Become and Transform Your Life
J.T. Warren
No ratings yet
Music Production 101
From Everand
Music Production 101
Caio Barbosa
No ratings yet
CIVIL ENGINEERING DESIGN INFORMATION SYSTEMS.: 2 & 3 - DIMENSIONAL AUTOCAD MODELING IN REAL COORDINATE GEOMETRY VLADIMIR
From Everand
CIVIL ENGINEERING DESIGN INFORMATION SYSTEMS.: 2 & 3 - DIMENSIONAL AUTOCAD MODELING IN REAL COORDINATE GEOMETRY VLADIMIR
VLADIMIR L NEMCHENOK
No ratings yet
The Silence of Everything: Unspoken emotions of the loudest sound
From Everand
The Silence of Everything: Unspoken emotions of the loudest sound
Malaika Nawaz
No ratings yet
BlockChain for Beginners
From Everand
BlockChain for Beginners
Matthew Smith
No ratings yet
Human Nature Potential in Nurture
From Everand
Human Nature Potential in Nurture
David L. Hawk
No ratings yet
ChatGPT for Business: Strategies for Success
From Everand
ChatGPT for Business: Strategies for Success
Matthew C. Smith
1/5 (1)
I Don't Need an Acting Class
From Everand
I Don't Need an Acting Class
Milton Justice
5/5 (3)
Cybersecurity for Executives: A Guide to Protecting Your Business
From Everand
Cybersecurity for Executives: A Guide to Protecting Your Business
Matthew C. Smith
No ratings yet
Options Trading for Income: Learn the strategies and techniques for maximizing returns and minimizing risk in the options market (2023 Guide for Beginners)
From Everand
Options Trading for Income: Learn the strategies and techniques for maximizing returns and minimizing risk in the options market (2023 Guide for Beginners)
Lane Conner
No ratings yet
Deadline Istanbul (The Elizabeth Darcy Series)
From Everand
Deadline Istanbul (The Elizabeth Darcy Series)
Peggy Hanson
5/5 (1)
Deadline Yemen (The Elizabeth Darcy Series)
From Everand
Deadline Yemen (The Elizabeth Darcy Series)
Peggy Hanson
5/5 (1)
The Linux Terminal for Advanced Users - The Command Line Made Easy: First Edition
From Everand
The Linux Terminal for Advanced Users - The Command Line Made Easy: First Edition
Michael Basler
No ratings yet
Conquering the Competition: Strategies for Standing Out in the Gaming Content Landscape
From Everand
Conquering the Competition: Strategies for Standing Out in the Gaming Content Landscape
Rian McCullen
No ratings yet
Keys to Better Reading
From Everand
Keys to Better Reading
Judy McFall
No ratings yet
Business English Writing: Effective Business Writing Tips and Will Help You Write Better and More Effectively at Work
From Everand
Business English Writing: Effective Business Writing Tips and Will Help You Write Better and More Effectively at Work
Mary G. Lewis
No ratings yet
How to Sell on Amazon and Product Research: Product Research Tips and Practical Guide on How to Find a Winning Product to Sell on Amazon Fba
From Everand
How to Sell on Amazon and Product Research: Product Research Tips and Practical Guide on How to Find a Winning Product to Sell on Amazon Fba
David L. Ross
No ratings yet
Cutting-Edge Desktop UI Development with Python, PySide6, PyQt6
From Everand
Cutting-Edge Desktop UI Development with Python, PySide6, PyQt6
Jay Nans
No ratings yet
A Discourse Analysis of 1 Peter
From Everand
A Discourse Analysis of 1 Peter
Ervin Ray Starwalt
No ratings yet
Osama the Gun
From Everand
Osama the Gun
Norman Spinrad
5/5 (1)
Content Creation Revolution with chatGPT
From Everand
Content Creation Revolution with chatGPT
Maria Cowen
No ratings yet
The Amazing Biological Revolution and The Amazing New Health Care
From Everand
The Amazing Biological Revolution and The Amazing New Health Care
Bertil Lindmark
No ratings yet
Gray Hat Hacking the Ethical Hacker's
From Everand
Gray Hat Hacking the Ethical Hacker's
Çağatay Şanlı
5/5 (1)
Operation Longlife
From Everand
Operation Longlife
E. Hoffmann Price
3.5/5 (3)
Day Trader-Forex Trading
From Everand
Day Trader-Forex Trading
Murry Naga
No ratings yet
Intrusion Detection Honeypots
From Everand
Intrusion Detection Honeypots
Chris Sanders
3/5 (2)
A To Z of Internet: Everything You Wanted to Know
From Everand
A To Z of Internet: Everything You Wanted to Know
Bittu Kumar
No ratings yet
Lock 'n Load Tactical Core Rules v5.0
From Everand
Lock 'n Load Tactical Core Rules v5.0
David Heath
No ratings yet
10K Blueprint
From Everand
10K Blueprint
Cian O Farrell
5/5 (2)
Securing ChatGPT: Best Practices for Protecting Sensitive Data in AI Language Models
From Everand
Securing ChatGPT: Best Practices for Protecting Sensitive Data in AI Language Models
Matthew C. Smith
No ratings yet
Software Patterns Made Easy
From Everand
Software Patterns Made Easy
Justice Nanhou
No ratings yet
Hamlet Had an Uncle: A Comedy of Honor
From Everand
Hamlet Had an Uncle: A Comedy of Honor
James Branch Cabell
4.5/5 (7)
Kellory the Warlock
From Everand
Kellory the Warlock
Lin Carter
No ratings yet
Anne of green gables
From Everand
Anne of green gables
L. M. Montgomery
No ratings yet