Scribd
Upload
4 views2 pages

RFID Program

This document contains an RFID program written in C++ that utilizes the MFRC522 library for reading RFID cards. It sets up a system to grant or deny access based on the UID of scanned cards, activating a relay for authorized access and a buzzer for denied access. The program includes serial communication for debugging and user interaction.

Uploaded by

suraj650novice
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
4 views2 pages

RFID Program

This document contains an RFID program written in C++ that utilizes the MFRC522 library for reading RFID cards. It sets up a system to grant or deny access based on the UID of scanned cards, activating a relay for authorized access and a buzzer for denied access. The program includes serial communication for debugging and user interaction.

Uploaded by

suraj650novice
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

RFID program

#include <SPI.h>
#include <MFRC522.h>

#define SS_PIN 5
#define RST_PIN 9
#define RELAY 3 //connect the relay to number 3 pin
#define BUZZER 2 // connect the buzzer to 2 pin
#define ACCESS_DELAY 2000
#define DENIED_DELAY 1000
MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522
instance.
void setup()
{
Serial.begin(9600); // Initiate a serial communication
SPI.begin(); // Initiate SPI bus
mfrc522.PCD_Init(); // Initiate MFRC522
pinMode(RELAY, OUTPUT);
pinMode(BUZZER, OUTPUT);
noTone(BUZZER);
digitalWrite(RELAY, HIGH);
Serial.println("Put your card to the reader for scanning ...");
Serial.println();

}
void loop()
{
// Look for new cards
if ( ! mfrc522.PICC_IsNewCardPresent())
{
return;
}
// Select one of the cards
if ( ! mfrc522.PICC_ReadCardSerial())
{
return;
}
//Show UID on serial monitor
Serial.print("UID tag :");
String content= "";
byte letter;
for (byte i = 0; i < mfrc522.uid.size; i++)
{
Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " ");
Serial.print(mfrc522.uid.uidByte[i], HEX);
content.concat(String(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : "
"));
content.concat(String(mfrc522.uid.uidByte[i], HEX));
}
Serial.println();
Serial.print("Message : ");
content.toUpperCase();
if (content.substring(1) == "AB CD EF GH") // enter your own
card number after copying it from serial monitor
{
Serial.println("Authorized access");
Serial.println();
delay(500);
digitalWrite(RELAY, LOW);
delay(ACCESS_DELAY);
digitalWrite(RELAY, HIGH);

else {
Serial.println(" Access denied");
tone(BUZZER, 300);
delay(DENIED_DELAY);
noTone(BUZZER);
}
}

You might also like