Scribd
Upload
9 views3 pages

BEEE Bit Paper

The document contains a series of multiple-choice questions related to electrical engineering concepts, including Ohm's law, electrical potential, transformers, and current types. Each question presents options for answers, focusing on fundamental principles and applications in electrical circuits. The content is structured to assess knowledge in various areas of electrical engineering.

Uploaded by

sanu19309
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views3 pages

BEEE Bit Paper

The document contains a series of multiple-choice questions related to electrical engineering concepts, including Ohm's law, electrical potential, transformers, and current types. Each question presents options for answers, focusing on fundamental principles and applications in electrical circuits. The content is structured to assess knowledge in various areas of electrical engineering.

Uploaded by

sanu19309
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

1. Which of the following elements of electrical engineering cannot be analyzed using Ohm’s law?

[ ]
a) Capacitors
b) Inductors
c) Transistors
d) Resistance

2. What is constant for a charged spherical shell according to basic electrical energy? [ ]
a) Electrical potential outside the spherical shell
b) Electrical potential inside the spherical shell
c) Electrical field outside the spherical shell
d) Electrical field inside the spherical shell

3. Where does electro-static shielding occur in a charged spherical shell? [ ]


a) When electrical potential outside spherical shell is zero
b) When electrical potential inside the spherical shell is zero
c) When electrical field outside the spherical shell
d) Electrical field inside the spherical shell

4. Which of the following is a correct representation of peak value in an AC Circuit? [ ]


a) RMS value/Peak factor
b) RMS value*Form factor
c) RMS value/Form factor
d) RMS value*Peak factor

5. Which of the following according to fundaments of electrical energy is correct about alternating current? [ ]
a) Frequency is zero
b) Magnitude changes with time
c) Can be transported to larger distances with less loss in power
d) Flows in both directions

6. What will be the direction of the drift velocity of electrons change with respect to the electric field? [ ]
a) same as that of electric field
b) opposite to that of electric field
c) perpendicular to that of the electric field in a positive direction
d) perpendicular to that of the electric field in a negative direction

7. What will be the current density of metal if a current of 30A is passed through a cross-sectional area of 0.5m2? [ ]
a) 7.5 A/m2
b) 15 A/m2
c) 60 A/m2
d) 120 A/m2

8. Which of the following is correct about the power consumed by R 1 and R2 connected in series if the value of R1 is greater than R2? [ ]
a) R1 will consume more power
b) R2 will consume more power
c) R1 and R2 will consume the same power
d) The relationship between the power consumed cannot be established

9. What is zero for a charged spherical shell? [ ]


a) Electrical potential outside the spherical shell
b) Electrical potential inside the spherical shell
c) Electrical field outside the spherical shell
d) Electrical field inside the spherical shell

10. What kind of quantity is an Electric potential? [ ]


a) Vector quantity
b) Tensor quantity
c) Scalar quantity
d) Dimensionless quantity

11. What do crowded lines of force indicate? [ ]


a) Strong electric field
b) Weak electric field
c) Strong electric potential
d) Weak electric potential

12. What is the direction of the electric field at a point? [ ]


a) Along the line perpendicular to the electric field
b) Along the line tangent to the electric field
c) Electric field has no direction
d) Electric field has a random direction
13. What is the magnitude of mutually induced emf, E2 in a transformer? [ ]
a) directly proportional to rate of change of flux and number of secondary turns
b) inversely proportional to rate of change of flux and number of secondary turns
c) proportional to rate of change of flux and inversely proportional to number of secondary turns
d) inversely proportional to the rate of change of flux and proportional to number of secondary turns

14. Which of the following will happen in a transformer when the number of secondary turns is less than the number of primary turns?
[ ]
a) The voltage gets stepped up
b The voltage gets stepped down
c) The power gets stepped up
d) The power gets stepped down

15. What is the number of primary turns in a 200/1000 V transformer if the emf per turn is 10V? [ ]
a) 5
b) 10
c) 20
d) 40

16. Which of the following is a correct representation of average value in an AC Circuit? [ ]


a) RMS value/Form factor
b) RMS value*Form factor
c) RMS value/Peak factor
d) RMS value*Peak factor

17. Who defined electric current and devised a method to measure current? [ ]
a) Michael Faraday
b) Andre-Marie Ampere
c) Nikola Tesla
d) Alessandro Antonio Volta

18. How many electrons will constitute 2 Coulombs of electric charge? [ ]


a) 6.24 * 1018 electrons
b) 12.48 * 1018 electrons
c) 1.602 * 1019 electrons
d) 3.204 * 1019 electrons

19. Which of the following is correct about direct current? [ ]


a) Magnitude is constant
b) Frequency is zero
c) Can be transported to larger distances with less loss in power
d) Flows in one direction

20. Who witnessed the effect of magnetism for the first time? [ ]
a) Hans Christian Orsted
b) Alexander Graham Bell
c) Michael Faraday
d) Gustav Robert Kirchhoff

21. Which of the following according is correct about electrical conductivity? __________
22. What is responsible for the current to flow? __________
23. Which of the following according to KCL must be zero? __________
24. How many directions can the electric field at a point have? __________
25. Which of the following will happen in a transformer when the number of secondary turns is greater than the number of primary turns?
__________
26. Which of the following is correct about the voltage transformation ratio in electrical engineering? __________
a) Ratio of number of primary turns to the number of secondary turns
b) Ratio of induced emf in secondary to induced emf in primary
c) Ratio of secondary current to the primary current
d) Ratio of power in primary to power in secondary
27. Which of the following according to the fundamentals of electrical engineering is correct about the induced emf in primary of transformer?
a) It is the ratio of primary turns to emf induced per turn
b) It is the product of primary turns and emf induced per turn
c) It is the ratio of secondary turns to emf induced per turn
d) It is the product of secondary turns and emf induced per turn
28. Which of the following current is drawn by the primary circuit of an ideal transformer when the secondary is open?
a) Secondary current
b) Leakage current
c) Magnetizing current
d) Working on current

29. What does positive power in an electrical element indicate? __________


30. How does induce emf in DC motor react to supply voltage? __________
31. Which of the following type of circuits in electrical engineering cannot be analyzed using Ohm’s law? __________
32. Which of the following according to KVL must be zero? __________
33. Mesh analysis employs the method of ___________
34. Mesh analysis is generally used to determine _________
35. Mesh analysis can be used for __________
36. Nodal analysis is generally used to determine_______
37. If there are 10 nodes in a circuit, how many equations do we get? __________
38. Nodal analysis can be applied for________
39. How many nodes are taken as reference nodes in a nodal analysis? __________
40. A voltage across a series resistor circuit is proportional to? __________
41. Many resistors connected in series will? __________
42. What is the voltage measured across a series short? __________
43. What happens to the current in the series circuit if the resistance is doubled? __________
44. If two bulbs are connected in parallel and one bulb blows out, what happens to the other bulb? __________

You might also like