Scribd
Upload
1 views2 pages

NTM Quick Start Express3

The Quick Start Guide for the Fluke Networks Network Time Machine (NTM) Express 3 Model provides installation and setup instructions, including connecting cables, powering on the device, and logging into the system. Users are guided to start the NTM application and add an agent for monitoring and analysis. Additionally, contact information for Fluke Networks support is provided for assistance in various regions.

Uploaded by

ductuyenit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1 views2 pages

NTM Quick Start Express3

The Quick Start Guide for the Fluke Networks Network Time Machine (NTM) Express 3 Model provides installation and setup instructions, including connecting cables, powering on the device, and logging into the system. Users are guided to start the NTM application and add an agent for monitoring and analysis. Additionally, contact information for Fluke Networks support is provided for assistance in various regions.

Uploaded by

ductuyenit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Fluke Networks Network Time Machine

Quick Start Guide: Express 3 Model

Your Network Time Machine (NTM) comes with the software already installed and licensed.
After you have unpacked it from its shipping container, proceed as follows:

1. Install the NTM in a 19-inch rack.


2. Connect cables as shown in the figure below.
3. Turn on the AC power and wait for the server to boot up.
4. When the Windows 2008 Server login screen appears, login with username operator and
password ClearSight1.
5. Start the NTM application by selecting Start > All Programs > Fluke Networks > Network
Time Machine Distributed > Network Time Machine Distributed Agent Manager.
6. After it launches, add the Agent:
 Host: localhost
 Username: Admin
 Password: (leave blank)
7. Connect to the Agent.

Connect a
monitor here. Connect the
Connect these Ethernet power cables
ports to the network(s) here.
Connect a USB Connect one of these Ethernet
from which you want to keyboard and ports to your control network for
monitor, capture frames, mouse here. remote operation of this NTM.
and perform analysis.
Contacting Fluke Networks
www.flukenetworks.com
[email protected]
+1-425-446-4519
 Australia: 61 (2) 8850-3333 or 61 (3) 9329 0244

 Beijing: 86 (10) 6512-3435

 Brazil: 11 3759 7600

 Canada: 1-800-363-5853

 Europe: +31-(0) 40 2675 600

 Hong Kong: 852 2721-3228

 Japan: 03-6714-3117

 Korea: 82 2 539-6311

 Singapore: 65-6799-5566

 Taiwan: (886) 2-227-83199

 USA: 1-800-283-5853

 Anywhere in the world: +1-425-446-4519


Visit our website for a complete list of phone numbers.

© 2011 Fluke Corporation. May 2011. All rights reserved. Printed in USA.

You might also like