0% found this document useful (0 votes)
39 views32 pagesRCC Objective
The document is a study course for RCC and Pre-stressed Concrete, providing an objective practice set for civil engineering students preparing for IES, GATE, and PSUs. It covers various topics including concrete design, shear, bond, torsion, and prestressed concrete members, along with practice questions and answers. The content is structured into chapters with specific focus areas and includes references to IS codes for design standards.
Uploaded by
bishal KCCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
39 views32 pagesRCC Objective
The document is a study course for RCC and Pre-stressed Concrete, providing an objective practice set for civil engineering students preparing for IES, GATE, and PSUs. It covers various topics including concrete design, shear, bond, torsion, and prestressed concrete members, along with practice questions and answers. The content is structured into chapters with specific focus areas and includes references to IS codes for design standards.
Uploaded by
bishal KCCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
/ 32
POSTAL STUDY COURSE
2015
RCC & Pre-stressed Concrete
(Objective Practice Set)
r=
MADE EASY
India’s Best Institute for IES, GATE & PSUs. Civil Engineering
CONTENTS
ME a aa
1. Introduction ————— 3-10
2. Concrete Design a 1-21
Shear, Development Length, Bond and Torsion eee 22-27
(nnn 28. 32
4. Prestressed Concrete Members Chapter
Introduction
2 span of 12 meters, to satisty
effective depth shall
by
@) 25%
() 40%
Q.4 Consider the following sta
1. Flexural strength ol
2
0.7 fhe N/mm Q8 Thelaplength in compression shall not be less
2. The creep coefficient at 7 days of loading than
Is 1.6, . (a) 24 (b) 30>
3, Modulus of elasticity of concrete can be © 2 (@) 1%
where $s the diameter of bar
Q.9 The straight length of lap shall not be less than
(a) 18§0r200mm (b) 2490r 240mm
(©) 1880r240mm (4) 3040r 200mm
expressed as 5000,/f, N/mm?
Which of these statements is/are correct?
(a) Both1and3 (b) Both 2and3
(©) Bothtand2 (d) 1,2and3
“3
RCC & Pre-stressed Concrete Objective Practice Set wwwmadeeasy.in MADE ERS [oe | noids | ehopal | Hyderabad | Jaipur | Lucknow | Indore | Bhubaneswar Pscce15|
Inia ve eet oS GAS FE
Q.10 The pitch of main bars ina slab should neither Q.17 Flat slab systems, designed by direct design
be more than three times the effective depth of method shall fulfil the following conditions
the slab nor exceed 1, There shall be minimum of three continuous.
(@) 300mm (bv) 450mm spans in each direction
(©) 400mm (d) 360mm 2. The design live load shall not exceed two
times the design dead load
3, The panels shall be rectangular, and the
ratio of the longer span to the shorter span
Q.11 Percentage of reinforcement in either direction
ofhigh strength deformed bars in slab shall not
beless than
(@) 0.15 (b) 0.16 within a panel shall not exceed 2.0
(©) 0.12 (@) none of theak Which of these statements is/are correct?
ht and2 — (b) Both 2 and 3
nd3 (d) 1, 2and3
1. The size of the Jo
inacolumns the cross-sectional area
jot exceed
SBSH 0] =| =)
column is ementshall be spaced not
(a) 6% more b) 10 spart than three times the thickness
(© 5%more d iis nor 450 mm
@se statements isfare correct?
Both 1and2 (b) Both 2and3
(©) Bothtand3 (d) 1,2and3
/ Q.15 Acontinuous beam shall be-de
deep beam when the ratio of effective
over-all depths less than
@ 20 () 25 Q.20 The ratio of the permissible bearing stress in
@ 3.0 15 working stress method of design and limit stata
@.16 Asimply supported beam shall be deemed to method of design is
beadeep beam when the ratio effective span 1). 985 (©) 5:9
} to over-all depth is less than © 6:5 @) 5:6
i @ 20 (b) 2.5 Q.21 The values of partial safety factor fordead load |
@ 30 15 and live load in limit state of collapse are
ae ‘© Copyright: MADEEASY. www.madeeasy.in Civil Engineering -_
MADE EASY
sy tore Fate on ES GATE E Paws | CMY | Noida | Bhopal | Hyderabad | Jaipur | Lucknow | Indore | Bhubaneswar |
PSCCETS|
@ 15and15 — (b) 1.5and1.0
Q.30 The nature of shrinkage stresses in concrete and
©) 10and15 — (d) 1.5and1.5
Steel in symmetrically reinforced sections are
.22 Inthe limit state of collapse, the values of partial o ooo esshva
safety factor for concrete and steel are © aneeea cadtandid
(@) 1.67 and0.87 (b) 1.5and 1.15 (G0) cone tha above
(©) 1.45and1.5 — (d) 0.87 and 1.67
; , Q.31 Meridional thrust in a spherical dome subjected
0.28 The maximum strainin concrete athe outer most toa concentrated load or uniformly distributed
Compression fibre in the limit state design of
- load, is always
flexure is (b) compressive
(@ 0.003 () (a) none of the above
(©) 0.0035 g)
ported beam of compo:
Q.24 Theareaotthe st
for concrete is
@) 036
On of lifting points
folerances in construction
The correct answeris |
Q.28 In cantilever retaining walls, expansion and () 1.2and3 (0) 1,3anda |
Contraction joints are provided at an interval of (© 23and4 (0) 1,2, 3and4 |
aon ‘oon Q.35 Sinking of an intermediate support of a
som (920m continuous beam |
Q.29 In counterfort retaining walls, the counterforts 1. reduces the negative moment at support
are provided at a spacing of 2. increases the negative moment at support
(@) 3t035m (b) 1.51020m 3. reduces the positive moment at centre of
© 4to5m (6) 5to6m span
Ss j
de
RCC & Pre-stressed Concrete Objective Practice Set www.madeeasy.in [dre | Shuboneswar| PSCCET
SYMRDE ERASE osm | oes | eon | iyentd | ore | wero’
res vt ence or ER GATE EF
3. Used for large spans
4, ine i treol
sreases the positive moment at cent 3 atom lood water to pass over
span
Which of these statements is/are correct? Codes:
(@) tand3 (b) 1and4 AB 3
(©) 2and3 (@ 2and4 @ 343
- wy 1234.
Q.36 A beam whose effective span is /, effective 3142
depth is ‘d' and overall depth is ‘D’, shall be @i324
deemed to be a deep beam when the ratio of
@.39 Which of the following are not dependenton the
1. 4 istess than 2.0 for a simply supporter applied load?
a ic strain
using the codes given
4, inclined ‘ s
Wnts tatemer i intial agreement with the
an
(@) tand4
Q.38 Match List-I with List-Il and
‘answet.using the codes given below the iis
‘answer using the codes given
(b) 1,2and3.
List-l " (© 2and3 (@) 1and2
‘A. Continuous bridge Q.41 A trapezoidal combined footing for two axially
B. Causeways loaded columns is provided when
. Economic span 1. Width of the footing near the heavier column
D. eae is restricted,
s ; 2. Length of the footing is restricted.
1. Used for deciding the number of piers 3. Projections ofthe ealng beyond the heavier
2. Bridge to enable road to pass over a cutting columns are restricted.
Ce. copreee ‘www.madeeasy.in Civil Engineering MADE EASY
Delhi | Noida | Bhopal | Hyderabad | Jaipur | Lucknow | Indore | Bhubanevor] PSCCE15:
Reba sereeeterrchrrs=n
Select the correct answer using the codes given
below:
(@) 1and2 (b) tends.
(©) 2and3 (6) 1,2and3
Q.42 Consider the following statements: Q.47 As per IS : 456-2000 side face reinforcement,
Under-reinforced concrete flexural members not less than 0.05% of web area, is provided on
1. aredeeper each side when the depth of web is not less
2. arestiter
3. _canundergo larger detlection {b) 400mm
Which of these statements is/are.@ (d) 750mm
(@) 1,2and3 ——(b)
(©) 2only
Reason (R) : Ifa uniform rate of strain is not
adopted it is not possible to obtain the
descending portion of stress and strain curve
beyond maximum stress.
allowing statements:
ty for steel should be based
Directions: The follp
statements; one labs
Assertion (A) :
greater than that ford
Reason (R) : The live oad ET with List-ll and select the correct
than dead loads.
sWer using the codes given below the lists :
0.45 List!
Assertion (A) : For determining uniaxial ;
compressive strength of concrete, cube is a ‘A. Moment and shear coefficients
better test specimen as compared to cylinder. . Fire resistance
D.
Reason (A): Stress distribution is more uniform Sidiog
over the cross-section of acyiinder as compared Span to depth ratiocot beam
tocubs, Lista
1. Durabiity
Q.46 Assertion (A) : The stress block used in the 2. Stability
limitstate design method is obtained by testing 3. Analysis of structure
of concrete cylinder under uniform rate of strain, 4, Deflection limits
RCC & Pre-stressed Concrete Objective Practice Set
www.madeeasy.in nF TIDE ERSES ox a | mato | pu |tadoow | de | meron FSET
MARE aso
nee Q.55 Compressive strength of concret
'8 taken ag
ABCD 0.67 f,, and not 1, because of
@4213 1. size factor which is constant for a cube
(oe) 3 2 1 4 size greater than 450 mm,
O4123 2. size factor which is constant for a cube gy
@ 3 124 size greater then 550 mm,
end friction zone which acts throughout tig
Q.52 Thetemperature reinforcementtin the vertical slab length of cube.
of a shaped RC. retaining wall is end friction zone which acts thre :
(@) Notneeded onto
. length of cylinder,
Hy Provided equally on inner and {ron hof these statements are correct?
() e
(b) 1and4
(6) 2and4
(0)
lab onslopeisSkNing, |
eCepmight:MADEEASY ‘wwwamadeeasyin ‘Civil Engineering Gamave EASY
ere Ear | Det | Noida | hops! | Hyderabad | Jaipur | Lucknow | Indore | Bhubaneswar
Introduction
12 @) 2. @) 3. @ 4. @ 5. (2) 6. ©) 7. (@)
8 (a) 9. @) 10. (a) 11. 12. (b) 13.(@) 14. ©)
15. (b) 16. (a) 17. ©) 18. (b) 19. d) 20. (b) 21. (0)
22. (6) 23. (©) . (2) 27.) 28. @)
29. (a) 30. 34. (0) 35. (b)
36. (b) 37. 41. 42. &)
43. (a) 48. (b) 49. (b)
50. (b)
-@ 56.
57.
MADE EAS.
for Fe 250
Feats
4. (a)
Creep costficient SCording to clause 26.26.1 of IS 456 : 2000
at Tdays = 22 :
eee ts the lap length in compression shall be equal to
2 jel the development length in compression butnot
5. (a) less than 249.
L
For cantilever beam =7 for L< 10m 9. @)
According to clause 26.2.5.1 (c) of IS 456: 2000.
for L> 10m
tL. 10 10. (a)
S*aer "7 According to clause 26.3.30f IS 456: 2000, the
apa horizontal distance between the parallel main
= d= 143mm
rainforcement bars shall notbe more than three
RCC & Pre-stressed Concrete ‘Objective Practice Set wwwmadeeasyin = ° 9 TIE ESS ocr: nous | eons | Hyco | opr | tuhnow | lode | hubanesnr| PSCCETE
say feet hottie A GEE PE —
times the effective depth of solid slab or 300 strength of concrete since restraing effect of
mm whichever is smaller. plates is less in case of oylinder as compar
tocube.
11. (e)
i 7 48. (b)
According toclause 26.5.2.10f 's 456: 2000, Abeam collapses when st # e
the mild steel reinforcement in either direction cay tvarcih ora evess’ nee a a
in slabs shall not be less than 0.15% of total gee re aueaesh Concrete.
cross-sectional area. However, this value can feu: 7
be reduced to 0.12%, when high strength 49. (b)
Geformed bars are used. =
Vinimum
(b) grade of
Spacing of longitudinal b reinforced
the periphery of the .¢ ed concrete
(a)
In flexure, the
45.
to.cube for determinining uniaxial compressive
2 ee www.madeeasyiin Civil Engineering Chapter
Concrete Design
Qi
flat slab, the absolute sum of
wverage negative bending
tion shall be taken as
ViADE EASY
It in any given plane one
unsupported then its unsupported
“The radial moment at the centre of a simply
shall not exceed
supported circular slab carrying a uniformly
be rt distributed load is
(a) 100 (©) 100=-
0 D Bye 2y2
> 5 @ 76" ©) ye"
b'
(©) 100 (a) 100=, we we
i ° ote Og
where b is width of the cross-section and D is
the depthot te cross-section measured inplane 9 The final deflection in beams dus to all loads
under consideration including the effects of temperature, creep and
RCC & Pre-stressed Concrete ‘Objective Practice Set ‘www.madeeasy.in au es ve cei tr £3 GATE 6 PO
‘shrinkage measured from the as cast level of
the support of the floors, roofs and all other
horizontal members shall not normally exceed
L
il
© 3 (©) 365
Z i
3 © 25
where /is the span of the beam
©
Q.10 The deflection including
temperature, creep ai
indetermina
(@) 15%
(©) 30%
Q.14 Incircular tanks witha
wall and the base
1. the thickness of the wall should not be less
than 150mm
TRADE EASES cts | ncida | enor | Hyderabod | Jsipur | Lucknow | Indore | Bhubaneswar} Bg
@.16 According to whitneys stress block in ultimatg
Q.21 The depth of footing for an isolated column is
Q.15 Acurved beamis designed for
1. bending moment
2, shear
3. tension
The correct answer is
(@ bothtand3 — (b) only3
() both2and3 (a) 1,2and3
load design method, the depth of stress
for a balanced section is limited to
(b) 0.67d
ect answeris
2) Only 1 (©) Both 4 and2
(©) Both1 ands (d) 1, 2and3
2, tensile stress in concrete shall not exceed Gatsby
1.2 Nimm?
3. bottom slab may be 150 mm to 200 mm z ee cpedlamoment
thick :
; 3. punching shear
Which of these statements islare correct? :
Which of ect?
(@) Both tand2 — (b) Both 1 and 3 @ oi res — sie carn
(©) Bolh2and3 (d) 1,2and3 (© tand3 (@) 1,2and3
12+ Ccopranemoensr www.madeeasyin Civil Engineering MADE EASY oem | noida | shopat | Hyderabad | Jaipur | Lucknow | Indore | Bhubaneswar
sal ont Yt fo ES GATE Pe
Q.22 For a continuous R.C. beam, match List-I List-I
(Condition) with List-II (Placement of live load) 1. Serviceability
and select the correct answer using the codes 2. Durability
given below the lists: 3. Reduction in sectional depth
List- 4, Ultimate moment capacity
‘A, Formaximum sagging moment in a span Codes:
B. Formaximum hogging momentat a support AB
C,_Formaximum hogging moment in a span 1
List-I
1. The spans adjoining the span
alternate span
ynerwo
aanaO
lowing statements:
prced (singly reinforced)
less than that for a
MADE EASY.
ts of contraflexureis3.60 m
be considered
of resistance of the 58
Which of these statements are CO
(@ tand2 (b) 1and4 Q.27 Match List-! with List-II regarding the minimum
(e) 3and4 (@) 2and3 concrete cover to reinforcing steel and select
Q.24 Match List-! with List-lI and select the correct the correct answer using the codes given below
answer using the codes given below the lists: the lists:
List-1 List-I
ir A. For longitudinal reinforcement in columns:
‘A. Doubly reinforced sectior i
B, Limit ances : cof size 200 mm and less, with 12 mm.
C. Minimum cover diameter bars as longitudinal steel.
D. Spandepthratio B. Forlongitudinal reinforcement in beams.
(b) 1900 mm
RCC & Pre-stressed Concrete ‘Objective Practice Set www.madeeasy.in ats : a
a i
Tan | Rade | Bhopal | Hyderbad |8pur | Lucknow | ndoe | Bhubareny
MADE EASS ar ee
somite | of these statements are
. For longitudinal bars in slabs.
e For! ential barsincolumnsof sizemmore (@) Sand4 Otani
than 200 mm. (©) 2and3 (6) tand2 |
tee Q.30 The specified span to de |
1, 40mmor diameter ofbar whichever is more satisfying the limits of sari a ott
2. 1Smmor diameter of bar whichever is more wren unin Bm, clonal
3. 25mmor diameter of bar whichever is more 4. Forhigher spans, these aeto be
4. 25mm by multiplying the ratios by (Y0fpan
~~ metres) a
For higher spans, these areto be med |
multiplying the ratios by (spaninety |
member are computed for factored 28 gest
Q.29 Consider the following statements: Reason (RA) : In the working st
‘The reinforcement in reinforced concrete shall method itis ensured that he interme! an
have concrete cover, the thickness of such cover due to working loads are less nant
shall be not less than aseees.
4, 25mm ave dose
2. thediameter of bar Q.32 Assertion (A) : All columns sh pote
3, thespacing betweenbars for aminimumeccertticty SFE rset
of colurnn vided by 500, PSION yao
led by 30subj toa! nd
cartoon
Th + econttiMADEEASY wwwamadeeasy. MADE EASY [cet | nas | shopat | Hyderabad | Jpur | wcknow | indore | Bhubeneswar
ae fet eke rE GATE
Reason (R) : Assertion refers to the design of concrete is 50 kg/cm? and the modular ratio is
axially loaded column and it may not be possible 18, then the stress developed in steel would be
to build a perfectly axially loaded column in (a) 1800kg/om? — (b) 1600 kg/em?
practice. (©) 1350ka/om? — (¢) 1300kg/em?
Q.33 Assertion (A) : According to IS: 456-2000, over-_ Q.39 The radial moment at the boundary of a simply
reinforced sections are not permitted supported circular slab of radius R, subjected
Reason (R) : There is ductile failure of over- to a uniformly distribution load of w will be
reinforced sections. (@) wR8 (b) wR
Q.34 A240 mm x 500 mm rectangular sa (0) swrene Qin
with M25 grade conctete i ying capacity of a column designed
The cracking momen}
(@) 35kN-m
(©) 7.0KN- (b) 662.5 kN
id) 1100.0 kN
in fig. span
rviceabilty limit
then it will be found that
Q.37 Aconerete colt
and a bending ma Pv codnrevi
Anisolated footing of
side along the plane of the B
provided under the column, cent: a
of column and footing coincide. The net
maximum and the minimum pressures in kN/m?
on soil under the footing are respectively ‘Column,
esection is sale
itcan not be judged from the given data
Q.42
(@) 95and55 (b) 95 and 75
(©) 75and55 (@) 7S and 75
Q.38 The effective depth of a singly reinforced Pedestal
rectangular beam is 30 cm. The section is over
reinforced and the neutral axis is 12cm below
the top. If the maximum stress attained by q=3MPa
RCC & Pre-stressed Concrete ‘Objective Practice Set wwmmadeeasyin = 15 TIADE EASY [oon | noida | short |
yerabad | Fair | wucknow | Indore
| Bhubaneswar |.
‘Aconcrete pedestal made of M20 mixis shown
in fig. The tan a value in this case will be
(@) notless than 3.6
(b) less than or equal to 3.6
(©) greaterthan3.6
(@)_ greater than or equal (03.6
Q.43. The reduction coefficient of a reinforced concrete
column with an effective length of 4.8,m,and
size 250 x300 mm is
(@) 0.80
{b) 0.85
a6 Arei
following B
Dead load 20 kN
Live load 30 KNm’
Seismic load 10 kN
The design bending
collaps¢ is
(a) 6OkKNm- (b) 75 kN
() 72m (6) 80kNm
Q.47 An R.C. short column with 300 mm x300 mm
‘square cross-section is made of M20 grade
concrete and has 4 numbers, 20 mm diameter
longitudinal bars of Fe415 steel. It is under the
action of a concentric axial compressive load,
Ignoring the reduction in the area of concrete
0.48
ase
ue tosteel bars, the ultimate axial load carrying
capacity of the column is
() 1659 kN {b) 1548KN
() 1198kN (6) 1069kN
‘An RC. square footing of side length 2m and
uniform effective depth 200 mm is provided for
2300 mm x00 mm column. The line of action
ofthe vertical compressive load passes through
the centroid of the footing as well as of the
olumn, If the magnitude of the load is 320 KN,
ial transverse (one way) shear stress
20 mm
What is tho effective span of the beam as per
6?
(2) 5300mm (b) 5400mm_
(c) 5200mm (d) 5150mm
Which one of the following statements about the
Percentage of tensile steel required to produce
a balanced reinforced concrete section is
correct?
16 + eceppigt naDEEAsy
‘wwormadeeasyiin
Civil Engineering MADE ERsg
Ine bert
Ea er ES GATE
‘Delhi | Noids | Bhopal | Hyderabad | Jaipur | Lucknow | Indore | Bhubaneswar /PSCCE15
The required percentage of steel
(@) Reduces as the
increases
Id strength of steel
) -
(©) Remains unchanged irrespective of the
yield strength of steel
's the same for a given quality of steel
irrespective of whether working stress
‘method is followed or ultimate load method
is used
(2) _Isonly a function of the modu
of steel,
(©)
Q.53 Beam sections
‘as compared to
(b)_ maximum tensile stress in steel reaches its
permissible value while maximum
compressive stress in concrete is less than
its permissible value
(©) maximum compressive strain in concrete
reaches the ultimate crushing value while
tensile strain in steel is less than its yield
value
()_ maximum compressive stress in concrete
reaches its permissible value while tensile
in steel is less than its permissible
MADE EAS)
the widths of colur
(@) 30mand 1.5m
() 1.5mand3.0m
(©) 3.0mand 3.0m
(6) 15mand 1.5m
Q.57 Inlimitstate design, under reinforced section is,
‘one inwhich
(@ tensile strain in steel reaches yield value
while maximum compressive strain in
concrete Is less than its ultimate crushing
strain
RCC & Pre-stressed Concrete
‘Objective Practice Set
te and Fe 250
(©) 10.00bD
(@) 17.26bD
aUare column section of size 350 mm 350
‘mis reinforced with four bars of 25 mm diameter
and four bars of 16 mm diameter. Then the
transverse steel should be
(@ Smmdia @240 mmole
(©) 6mm dia @250 mm c/e
(©) 8mm dia @250 mmole
(d) 8mm dia @350 mm cle
wwwmadeeasyin — * 17 yeknow | Indore | Chubar
[MADE ESE omen! Tod | nr |e Lins | Drie [SCETS]
mADE ERE al
lk ANSWERS |
Concrete Design 5. (@) 60) 72e
) 4, (0) »
1, (0) 2, (b) 2 1 12, (0) 13. (0)
8. (a) 9.) 10. (@) . 49. (a) 20. (0) -
re 7. @ 1s
15. (d) ©) il 25. (b) 26. (a) 27. (a)
22. (2) 23. - . () 34, (@)
41. @)
48.
5.
based on elastic theory (working
According to clause 26.5.1.1 of IS
Ms a Ss)
minimum area of tension reinforcement shal no Maximum redistribution of moment = 15%
be less than that given by
26. (d)
fon - De Tho otfoctive width, b, of the flange is given bk
by = by +2460,
9. (b) . i si500 7
According to clause 23.2 of IS 456 : 2000, ja
Jy = 3600mm
D, = 100mm
t * Song
je Carnipe Okt, www.madeeasy.in Civil Engineering ——————————————
mei
‘ Joe | hubsreswar | PSCCETS
TIDE RSS oct nace | chopa | viet | npr | anon | Indore | hs [ese]
SD rete tet tia nS CATE Fe
450 , 60x6
oi b= 200+ 229 45100 = 2x3” 2x3" a
= 75 +20= 95K
= 300 + 600 + 600 ene
= 1500mm i £3
30. (a)
= 75-20 = 55 kNim?
The permissible value of spanieffective depth
Tatio depends on: 38. (c)
(@) The basic’vatue, that is, span and support
conditions
(6) The type and amount of te
(©) The amount of comp
(6) The type of be;
33. (c)
‘Thereis
sO kglomt
MADE EASY
¥ 0.9,
00x 3
09, +1
36. (c) * 20
£09%4
£36
43. (b)
Reduction coefficient
Jett
= 125-38
ACC & Prestressed Concrete ‘Objective Practice Set [mabe EAsy|
ll fe Pte ee GATE GON
44. (c)
Foracantilever
In this case
L W357
500
Hence it fails in deflection,
For lateral stabilly L shall not exceed 25 b nor
100b7/d
Now, 25b = 25 x 150 =.
But L
Henes it fails in lateral
(a)
= 1256.64 mm?
A, = 30?
P, = 0.4 x20 x300? + 0.67
x415 x1256.64N
= 1069 KN
48, (a)
Uniform soil pressure on footing
a To
Deiht | Noida | thopet | Hiydea | J" | tu %
1» 2204 80 KNin?
2
Now nocton for ono way shone 1 ata det
‘arom tho forco of tho column
0)
1000
“0? 10003200
= 0.26 inn?
tor of tho bars shall not oxceed one
a} thicknoss of tho slab,
Bait integrally wis
akon as clear span plus the
Of slab or beam or contre to
Upports, whichover is less.
= 5400 mm
and offective span = § x 1000
300 , 300
22
= 6300 mm
52. (a)
For a balanced section
0.36 fbx = 0.87 fy Ay
Cop MADEEAST
‘wwwimadeeasyin
Civil Engineering G3MADE EAs
Deis | tsida | Bhopal | Hyderabod
| Jaipur | Lucknoer | Indore | Bhubaneswar
Do Fat fr RYE ie
= Ay = 226 babe
Oa7t,
AS |, increases A, decreases,
54, (d)
L
q % 28 simply supported stab
i.
q 32 continuous slab
Lis the short span of slab
For continuous beam, lever arm is given by
z = 0.2(1+1.5D)
1
For 106 58
and z= 051
net
ra D
wurth of the diameter of the
din no case less than
MADE EAS
‘Objective Practice Set
RCC & Prestressed Concrete
wwwmadeeasy.in
+21 Chapter
Bacluisl cee
hear, Developme!
Tho avorago pormissl
bars is moro tha
a4
stross shal
(a) 1.6Ninm
(0) 28Nimm?
Minimum shear roinforcementis)
(a) nominal shear stress fs oss th
shear stross
nominal shoar stress: is mort
pormissible shear stress
(0). nominal shoar stress oxcoeds half tho value
of pormissiblo shear stross
(6) none of tho above
@.6 Tho contribution of bent up bars towards shoar
resistance shall not be more than
as
(b) than
22 + © ConpyitsMADEEASY
nt Length,
Bond and Torsion
shear reinforcement
yar reinforcement
reinforcement
infggcement
ay be used without ond
nfavided development lena!
ents satisfied.
‘eso staternantsisfare correct?
(b) Both 1 and 3
(d) 1, 2and3
ing of shear renforoamer
'@ member shal
() Both 1and2
The maximum spaci
moasured along the axis of th
notexceed
(a) 0.75d for vertical stirrups
(b) 0.75d for inclined stirrups
() 200 mm for vertical stirrups
(d) 250 mm‘or inclined stitups
Git Engineeti"d
asy.In
Te i CON ————V UU
GSU ERASE oan ce tna ocd | np | edn | ee | eta] PSCCETS)
erie
Q.10 Study the following statements: Godse=
1. Inno case, the spacing of stirups ina beam A 8} GD
shall exceed 300 mm, wee’ i
2 Shear reinforcement in the form of stirups 4-3 214
04523
Shall not be less than, 24S were, is 134 6
O87 i
Which of these,
@
©
aig M
Q.14 Inaring beam subjected to uniformly distributed
load
1
Stirrup spacing, b is breadth of the beam
and f, is the characteristic strength of
stirrups.
The characteristic
not exceed 4:
shear force at mid spanis zero
shear force at mid span is maximum |
ion at mid span is zero j
mid span is maximum
atements are correct?
(b) 1and4
Both 1 af
MADE EASY‘
select the
below.the lists
dinto a simple support must be
= p their full strength at a designated
ne (eondiaiee So that their moment capacity is more
B) Tempel sess: an the bending moment at that point. The
C. Hoop stress clauses of the code require that
D. Torsional stress shear 1.3m,
List-Il 1 tgs SM,
1, Zeroatcentre of cross-section
2. Circumferential stress 2 $98 13M +g
3, Linear stress 4% OV
4. Longitudinal stress
5, Zeroonthesurtace 3 osu)
RCC & Pre-stressed Concrete Objective Practice Set www.madeeasy.in +23 .dore | Bhubaneswar
seers]
MADE EASY)!
ans CAE BS 7
reinforcement in beams and slabs is sulk
Which ofthese statements ar comet rite rack. ent
tO ands o 12. and 3 Reason (R):A large number of smaller diameter
ie) eae sls pars, well aistriputed inthe tension zone, redvcs
0.17, Thecoda provisions recommend minimum shear bars mc nicnmoreefecivey analogs
forcementin he form stirUps nme beams: iameter bars of the same area.
in the beamsection .
‘9.22 Consider the following statements:
4. tocaterfor any torsion
2. toimprove ductility oft
3. to improve dowel acti
he oross-section ds
ion -of longitudinal 1. Reinforcement thatis nolonger requredtor
tension bars flexure beyond a certain section, shall
Which of these statements is/2r060 however be extended by d or 12,
(@ 1.2and3 nichever is greater, before curtaling.
(©) Onlyt ) aif the bars should be bentupat
" point.
Directions: The follo¥ veity at cut point
the shear force at hat
provided local bond stress. ,
Q.20: Assertion (A) : The development length " ;
for
HYSD Fed15 bars isless than that for mil oi
. plain bars. — @ :
(c) 4
Reason (R) : The permissible bond
stress
HYSD Fe 415 bars is more than that for aa a”
steel plain bars.
plain bars : 024 A beam of rectangular cross-seeth
@.21 Assertion (A) : Dolalling of bars as per the Did Bec ec Ae
san) ag of us apr be maim tenn
d/6
(@) 25Poh —(b) 3.0PalL o ra dis andas
(©) 35Poh. (@) 4.0PQIL
143-1980 limits the minimum characteristic
Q.15 If a simply supported coneett ai
prestressed withaforceg N,isdesign gstressed concrete for post tersoned
of 10 mand toca
central dip of thé:
2
(2 3 4
Inthe PS.C. beam shown in fig. fy = 45 MPa @4 1 2
and it supports a ud. of 15 kNin including Q.21. Ancidinary mild steel barhas been prestressed
self weight Itis prestressed by a paraoblic cable to a workin ‘s
; 19 stress of 200 MPa. Young’
carrying an effective prestress of 200 kN, The ‘Modulus of steel is 200 GPa. Permanentnegalve
shear rektance of uncracked section at the strain due to shrinkage and creep is 0.0008, HOW
‘support wil
ao ‘ a 8 ast ‘much is the effective stress loft In stoo!?
(©) 94.2kN (6) 95.4kN o eiiea oo
7 (© 40MPa (@) 16 MPa z
30 + © Otoppimammneusy
www.madeeasy.in Civil Engineering mADE
EEFASS Tens | woida | oropat | ryserabod | Jopur | Lucknow | indore | Bhubaneswar] PSCCE15.
ren fet atte ES GATE @ Pa
Q.22 A prestressed concrete b
eam has a cross- ici
seclert with the following properties: toe ©) of elasticity and creep values are
= 46,400 mm, | = ¢ i
'=75.8 x 107 mm, (d) of high modulus of elasticity and low creep
Yootom = 244 MM, Yigg = 156 mm.
lis subjected to a prestressing force at an 2-24 lHpercentage gain instioss due to UDL in tendon
eccentricity e' so as to have a zero stress at zero} lhepieccenireny Wl”
the top fibre. The value of 'e is given by wi E, wi 4
(@) 66.66mm (6) 66.9mm © BEE ©) 1aP Ee
(© 10472mm — (4) 183.33mm °
For prestressed structura = oe
strength concrete is use 12P
(2) both shrinkag cestrossing force in tendon, w is
is of elasticity of concrete and
sticity of steel.
1_Po
Re eon |
Pel? w? 40x10? |
= (upwards) 2 we
er Wovens) = 8? BP” 8x 2506
4. (d) = 0.2m= 200mm
Tobalancethe concentratedtoad, the maximum 16. (3) Ae
BM due to the concentrated load should be = 150x300 = 45000 mm?
‘equal to the moment due to the prestressing iz 150x300 zane
force ‘P'. 12
RCC & Pre-stressed Concrete ‘Objective Practice Set www.madeeasy.in 31 Delhi | Noida | Bhopal | Hyderabad | Jaipur | Lucknow | indore | Phubeneswar
MADE ERS!
b>
MADE FASS LPS
- kN/m using small wedding gr ™
25 x0.18 x0.80 = 1.125 ANH Each grip consists of imo LA
In Lee Mc Call system anchoring ab
we Ee agknem done by screwing special treageyy te
