A

MINI PROJECT

REPORT ON

"ENERGY HARVESTING USING BICYCLE POWER GENERATOR"

Dissertation submitted in partial fulfilment of the requirement for the award of the degree of

BACHELOR OF TECHNOLOGY
IN

MECHANICAL ENGINEERING
By
CH. JAYAKANTH 23QT5A0302

Under the esteemed guidance of

Mr. M. MURTHY REDDY MTech,(Ph.D)

Asst. Professor

DEPARTMENT OF MECHANICAL ENGINEERING

KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S
(Academic Year :2021-2025)
 A
MINI PROJECT

REPORT ON

"ENERGY HARVESTING USING BICYCLE POWER GENERATOR"

Dissertation submitted in partial fulfilment of the requirement for the award of the degree of

BACHELOR OF TECHNOLOGY
IN

MECHANICAL ENGINEERING
By
MD. AFRIDI 23QT5A0314

Under the esteemed guidance of

Mr. M. MURTHY REDDY MTech,(Ph.D)

Asst. Professor

DEPARTMENT OF MECHANICAL ENGINEERING

KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S
(Academic Year :2021-2025)
 A
MINI PROJECT

REPORT ON

"ENERGY HARVESTING USING BICYCLE POWER GENERATOR"

Dissertation submitted in partial fulfilment of the requirement for the award of the degree of

BACHELOR OF TECHNOLOGY
IN

MECHANICAL ENGINEERING
By
D. SANDEEP 23QT5A0310

Under the esteemed guidance of

Mr. M. MURTHY REDDY MTech,(Ph.D)

Asst. Professor

DEPARTMENT OF MECHANICAL ENGINEERING

KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S
(Academic Year :2021-2025)
 A
MINI PROJECT

REPORT ON

"ENERGY HARVESTING USING BICYCLE POWER GENERATOR"

Dissertation submitted in partial fulfilment of the requirement for the award of the degree of

BACHELOR OF TECHNOLOGY
IN

MECHANICAL ENGINEERING
By
V. BALAJI 22QT1A0305

Under the esteemed guidance of

Mr. M. MURTHY REDDY MTech,(Ph.D)

Asst. Professor

DEPARTMENT OF MECHANICAL ENGINEERING

KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S
(Academic Year :2021-2025)
 KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S

DEPARTMENT OF MECHANICAL ENGINEERING

C E RTIFI CATE
This is to certify that the Mini Project Report entitled

"ENERGY HARVESTING USING BICYCLE POWER GENERATOR"

That is being submitted
By

CH. JAYAKANTH 23QT5A0302

In partial fulfilment for the award of the degree of Bachelor of Technology in Mechanical Engineering
from the Jawaharlal Nehru Technological University, Hyderabad. This is a bonafide work carried out by
them under our guidance and supervision. The results presented in this dissertation have been verified and
are found to be satisfactory. The results embodied in this dissertation have not been submitted to any other
University or Institute for the award of any other post-graduation.

INTERNAL GUIDE HEAD OF THE DEPARTMENT

Mr. M. MURTHY REDDY, M.Tech.,(Ph.D) Mr. M. MURTHY REDDY, M.Tech.,(Ph.D)

Department of Mechanical Engineering Department of Mechanical Engineering

EXTERNAL EXAMINER PRINCIPAL

 KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S

DEPARTMENT OF MECHANICAL ENGINEERING

C E RTIFI CATE
This is to certify that the Mini Project Report entitled

"ENERGY HARVESTING USING BICYCLE POWER GENERATOR"

That is being submitted
By

MD. AFRIDI 23QT5A0314

In partial fulfilment for the award of the degree of Bachelor of Technology in Mechanical Engineering
from the Jawaharlal Nehru Technological University, Hyderabad. This is a bonafide work carried out by
them under our guidance and supervision. The results presented in this dissertation have been verified and
are found to be satisfactory. The results embodied in this dissertation have not been submitted to any other
University or Institute for the award of any other post-graduation.

INTERNAL GUIDE HEAD OF THE DEPARTMENT

Mr. M. MURTHY REDDY, M.Tech.,(Ph.D) Mr. M. MURTHY REDDY, M.Tech.,(Ph.D)

Department of Mechanical Engineering Department of Mechanical Engineering

EXTERNAL EXAMINER PRINCIPAL

 KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S

DEPARTMENT OF MECHANICAL ENGINEERING

C E RTIFI CATE
This is to certify that the Mini Project Report entitled

"ENERGY HARVESTING USING BICYCLE POWER GENERATOR"

That is being submitted
By

D. SANDEEP 23QT5A0310

In partial fulfilment for the award of the degree of Bachelor of Technology in Mechanical Engineering
from the Jawaharlal Nehru Technological University, Hyderabad. This is a bonafide work carried out by
them under our guidance and supervision. The results presented in this dissertation have been verified and
are found to be satisfactory. The results embodied in this dissertation have not been submitted to any other
University or Institute for the award of any other post-graduation.

INTERNAL GUIDE HEAD OF THE DEPARTMENT

Mr. M. MURTHY REDDY, M.Tech.,(Ph.D) Mr. M. MURTHY REDDY, M.Tech.,(Ph.D)

Department of Mechanical Engineering Department of Mechanical Engineering

EXTERNAL EXAMINER PRINCIPAL

 KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S

DEPARTMENT OF MECHANICAL ENGINEERING

C E RTIFI CATE
This is to certify that the Mini Project Report entitled

"ENERGY HARVESTING USING BICYCLE POWER GENERATOR"

That is being submitted

By

V. BALAJI 22QT1A0305

In partial fulfilment for the award of the degree of Bachelor of Technology in Mechanical Engineering
from the Jawaharlal Nehru Technological University, Hyderabad. This is a bonafide work carried out by
them under our guidance and supervision. The results presented in this dissertation have been verified and
are found to be satisfactory. The results embodied in this dissertation have not been submitted to any other
University or Institute for the award of any other post-graduation.

INTERNAL GUIDE HEAD OF THE DEPARTMENT

Mr. M. MURTHY REDDY, M.Tech.,(Ph.D) Mr. M. MURTHY REDDY, M.Tech.,(Ph.D)

Department of Mechanical Engineering Department of Mechanical Engineering

EXTERNAL EXAMINER PRINCIPAL

 ACKNOWLEDGEMENT

It is customary for a student to thank all those who have helped him to successfully
complete a project, particularly a different one, but we are doing so not because of the
monotonous tradition but because they are genuinely entitled to our heart full thanks.
I am highly indebted to Smt. K.NAGAMANI, Chairperson,KLR College of
Engineering & Technology, Paloncha.
We are very much grateful to MR. SIDDHARTH REDDY, secretary of
KLR college of engineering & technology, paloncha.
We are greatly obliged to our Principal Dr. K RAJENDRA PRASAD, Head of the
Department Mr. M. MURTHY REDDY, for creating an excellent academic Eli mate which
made this endeavour possible.

We would like to extend our sincere thanks to our guide, Mr. M. MURTHY
REDDY, Asst. Professor for his keen interest, valuable suggestions and constant
encouragement throughout the project.

We are also thankful to the staff of department labs, KLR, PALVONCHA, for
providing us with the required tests and thankful to the library staff for providing journals and
academic books.

We take great pleasure in expressing deep gratitude to all those who guided us during
the project work.

Last but not the least, we wish to acknowledge our parents and friends for giving
moral strength and constant encouragement.

CH. JAYAKANTH 23QT5A0302

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 ACKNOWLEDGEMENT

It is customary for a student to thank all those who have helped him to successfully
complete a project, particularly a different one, but we are doing so not because of the
monotonous tradition but because they are genuinely entitled to our heart full thanks.
I am highly indebted to Smt. K.NAGAMANI, Chairperson,KLR College of
Engineering & Technology, Paloncha.
We are very much grateful to MR. SIDDHARTH REDDY, secretary of
KLR college of engineering & technology, paloncha.
We are greatly obliged to our Principal Dr. K RAJENDRA PRASAD, Head of the
Department Mr. M. MURTHY REDDY, for creating an excellent academic Eli mate which
made this endeavour possible.

We would like to extend our sincere thanks to our guide, Mr. M. MURTHY
REDDY, Asst. Professor for his keen interest, valuable suggestions and constant
encouragement throughout the project.

We are also thankful to the staff of department labs, KLR, PALVONCHA, for
providing us with the required tests and thankful to the library staff for providing journals and
academic books.

We take great pleasure in expressing deep gratitude to all those who guided us during
the project work.

Last but not the least, we wish to acknowledge our parents and friends for giving
moral strength and constant encouragement.

MD. AFRIDI 23QT5A0314

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 ACKNOWLEDGEMENT

It is customary for a student to thank all those who have helped him to successfully
complete a project, particularly a different one, but we are doing so not because of the
monotonous tradition but because they are genuinely entitled to our heart full thanks.
I am highly indebted to Smt. K.NAGAMANI, Chairperson,KLR College of
Engineering & Technology, Paloncha.
We are very much grateful to MR. SIDDHARTH REDDY, secretary of
KLR college of engineering & technology, paloncha.
We are greatly obliged to our Principal Dr. K RAJENDRA PRASAD, Head of the
Department Mr. M. MURTHY REDDY, for creating an excellent academic Eli mate which
made this endeavour possible.

We would like to extend our sincere thanks to our guide, Mr. M. MURTHY
REDDY, Asst. Professor for his keen interest, valuable suggestions and constant
encouragement throughout the project.

We are also thankful to the staff of department labs, KLR, PALVONCHA, for
providing us with the required tests and thankful to the library staff for providing journals and
academic books.

We take great pleasure in expressing deep gratitude to all those who guided us during
the project work.

Last but not the least, we wish to acknowledge our parents and friends for giving
moral strength and constant encouragement.

D. SANDEEP 23QT5A0310

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 ACKNOWLEDGEMENT

It is customary for a student to thank all those who have helped him to successfully
complete a project, particularly a different one, but we are doing so not because of the
monotonous tradition but because they are genuinely entitled to our heart full thanks.
I am highly indebted to Smt. K.NAGAMANI, Chairperson,KLR College of
Engineering & Technology, Paloncha.
We are very much grateful to MR. SIDDHARTH REDDY, secretary of
KLR college of engineering & technology, paloncha.
We are greatly obliged to our Principal Dr. K RAJENDRA PRASAD, Head of the
Department Mr. M. MURTHY REDDY, for creating an excellent academic Eli mate which
made this endeavour possible.

We would like to extend our sincere thanks to our guide, Mr. M. MURTHY
REDDY, Asst. Professor for his keen interest, valuable suggestions and constant
encouragement throughout the project.

We are also thankful to the staff of department labs, KLR, PALVONCHA, for
providing us with the required tests and thankful to the library staff for providing journals and
academic books.

We take great pleasure in expressing deep gratitude to all those who guided us during
the project work.

Last but not the least, we wish to acknowledge our parents and friends for giving
moral strength and constant encouragement.

V.
CH.BALAJI
JAYAKANTH 22QT1A0305
23QT5A0302

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 DECLARATION

I here by declare that the project entitled "ENERGY HARVESTING USING BICYCLE
POWER GENERATOR" is submitted to KLR COLLEGE OF ENGINEERING &
TECHNOLOGY inpartial fulfillment of the requirement for the award of Degree of
bachelor of Technology in Mechanical Engineering by JNTUH, the project is done by us
and not has been submitted to any other institute or university for the award of any
degree or equivalent.

Date :
Place : PALONCHA

PROJECT ASSOCIATES

CH. JAYAKANTH 23QT5A0302

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 DECLARATION

I here by declare that the project entitled "ENERGY HARVESTING USING BICYCLE
POWER GENERATOR" is submitted to KLR COLLEGE OF ENGINEERING &
TECHNOLOGY inpartial fulfillment of the requirement for the award of Degree of
bachelor of Technology in Mechanical Engineering by JNTUH, the project is done by us
and not has been submitted to any other institute or university for the award of any
degree or equivalent.

Date :
Place : PALONCHA

PROJECT ASSOCIATES

MD. AFRIDI
CH. JAYAKANTH 23QT5A0314
23QT5A0302

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 DECLARATION

I here by declare that the project entitled "ENERGY HARVESTING USING BICYCLE
POWER GENERATOR" is submitted to KLR COLLEGE OF ENGINEERING &
TECHNOLOGY inpartial fulfillment of the requirement for the award of Degree of
bachelor of Technology in Mechanical Engineering by JNTUH, the project is done by us
and not has been submitted to any other institute or university for the award of any
degree or equivalent.

Date :
Place : PALONCHA

PROJECT ASSOCIATES

D.
CH.SANDEEP
JAYAKANTH 23QT5A0310
23QT5A0302

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 DECLARATION

I here by declare that the project entitled "ENERGY HARVESTING USING BICYCLE
POWER GENERATOR" is submitted to KLR COLLEGE OF ENGINEERING &
TECHNOLOGY inpartial fulfillment of the requirement for the award of Degree of
bachelor of Technology in Mechanical Engineering by JNTUH, the project is done by us
and not has been submitted to any other institute or university for the award of any
degree or equivalent.

Date :
Place : PALONCHA

PROJECT ASSOCIATES

V.
D.
CH.BALAJI
SANDEEP
JAYAKANTH 22QT1A0305
23QT5A0310
23QT5A0302

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING