Pump Division

MSP
Vertical, In-line, Medium Speed Pump

Bulletin PS-10-1b (E/A4)

Pump Division

Pump Supplier To The World

Pumping Solutions Flowserve is providing pumping solutions which permit customers to continuously improve productivity, profitability and pumping system reliability. Market Focused Customer Support Product and industry specialists develop effective proposals and solutions directed toward market and customer preferences. They offer technical advice and assistance throughout each stage of the product life cycle, beginning with the inquiry.

Dynamic Technologies Flowserve is without peer in the development and application of pump technology, including: Hydraulic engineering Mechanical design Materials science Intelligent pumping Manufacturing technology Broad Product Lines Flowserve offers a wide range of complementary pump types, from pre-engineered process pumps, to highly engineered and special purpose pumps and systems. Pumps are built to recognized global standards and customer specifications.

Pump designs include: Single stage process Between bearing single stage Between bearing multistage Vertical Submersible motor Rotary Reciprocating Nuclear Specialty

Pump Division

Type MSP Medium Speed Pump With Variable Frequency Technology

Innovative Design Closely following API 610, 8th Edition design criteria, the MSP is a vertical, in-line, single stage, medium speed pump. It offers exceptional performance and operating benefits. Hydraulics specifically designed for low flow, high head applications Modified concentric volute to minimize radial forces Radial vaned impeller with balance holes to minimize axial forces

Medium speed induction motor with variable frequency drive for optimal BEP and adaptability in a wide range of changing service conditions Pump control by motor frequency adjustment or integrated PI controller EExd (e) II C T4, IP 55,motor design for hazardous environments Complete electronicelectrical package and customized control solutions available Broad Application MSP pumps may be applied in low flow, high head applications in: Power generation Oil production and transportation Hydrocarbon processing Petrochemical and chemical processing General industry Complementary Pump Designs MSP pumps may be used with other Flowserve pumps of API design. These include: Petroleum process pumps Horizontal, between bearing pumps Vertical pumps Specialty pumps

HPX

Pump Division

Type MSP Medium Speed Pump With Variable Frequency Drive

Flowserves MSP design brings a new level of sophistication to low flow, high head pump technology. Featuring a medium speed induction motor with a range from 2000 rpm to 8000 rpm, the MSP delivers peak efficiency, excellent economy, simplified installation and reduced maintenance. Design Features Advanced low flow, high head performance Variable speed motor-pump control Soft-starting of electric motor Elimination of step-up gearbox and lubrication Elimination of throttling, bypass or control valves Easy integration into main process control circuit Complete electronic-electrical packages for quick connection to power supply Customized control solutions including programmable minimum flow protection

Typical Applications Low flow, high head requirements in: Power Generation Boiler feedwater Condensate Oil & gas production and hydrocarbon processing Feed Recycle Charging Transfer Chemical processing and general industry Transfer Wash down and cleaning services Options Inducer for lower NPSHR Horizontal configuration Two stage opposed impeller configuration Materials CA6NM Carbon steel 316 stainless steel Duplex stainless steel

Operating Parameters Temperatures from -40C (-40F) to 200C (392F) Pressures to 100 bar (1450 psi) Maximum suction pressure to 40 bar (580 psi) Operating speeds from 2000 rpm to 8000 rpm Maximum flow at 8000 rpm 25 m3/h (110 gpm) Maximum head at 8000 rpm 900 m (2950 ft)

Variable Frequency Drive Reduced energy cost is achieved as no energy is wasted for throttling and the pump is running at or close to BEP. Other benefits include: Elimination of gearbox Optimal pump performance over a wide range of service conditions Manual control by selecting desired speed Optional, integrated PI controller to adjust pump performance in response to physical parameters like pressure or flow rate (Example: speed regulation based upon a pressure set point can easily be established, thus eliminating the need for a throttling control valve.)

Pump Division

Variable Speed ensures consistent BEP performance. It achieves system fluid demand without throttling for significant energy savings. Changing operating conditions are addressed by simple speed adjustment Variable Frequency Drive includes all safety features. Choice of speed control or PI controller for easy process control implementation Numerous control options for exact requirements of system configuration Rigid Coupling ensures precision shaft alignment while eliminating time-consuming manual alignment. No need for gear box and lubrication Lifetime lubricated bearings for most applications Vertical In-line Design permits easy pump installation and mechanical seal access Special Hydraulics provide efficient low specific speed hydraulics for low flows at high heads. Modified concentric volute and impeller with balance holes for minimal radial and axial force, respectively Open impeller with deep scallops for superior axial thrust control Compliance with API 610 bearing life requirements Variable Speed Motor is EExd (e) II C T4, IP55, explosion-proof, medium speed with grease lubricated, ball bearings Mechanical Seals are available in single or dual cartridge design. Single seals with API Plans 11 or 23 for seal face flushing Dual seals with API Plans 11/52 or 53 Impeller Sub-Shaft allows wide range of materials for wetted shaft

Pump Division

Options and Technical Data

Horizontal Configuration While primarily designed for vertical in-line installation, a horizontal end suction arrangement is available.

Inducer A high specific speed, axial flow, pumping device, an inducer provides significant improvement in suction performance by reducing pump NPSHR. MSP2 Two Stage Design Two stage opposed impeller configuration limits axial thrust and is particularly well suited for very high head applications.

Frequency Converter Control of the frequency converter enhances the performance, reliability and safety of the pump and motor combination. Frequency converter can be supplied as a component for user installation. It is also available as a plug-in package with pre-set motor parameters, all required accessories and specifications to local codes. Optimal computer software and integrated PI controller further customize pump-motor operation.

MSP Variable Speed Range Chart

m 1000

MSP 1 stage
900 800 700 600 500 400 300 200 100 0 m3/h gpm
20 10 15 25 30 125

MSP 2 stage

TDH

1750 1500 1250 1000 750 500 250

25

50

75

Flow Rate

100

Pump Division

Global Service and Technical Support

Advanced Technologies Few if any pump companies can match Flowserves capabilities in hydraulic and mechanical design or in materials engineering. These capabilities include: Computational fluid dynamics Flow visualization Cavitation studies Efficiency optimization Finite element analysis Rapid prototyping Captive high nickel alloy and light reactive alloy foundries Non-metallic materials processing and manufacturing

Service and Repair Group Flowserves Service and Repair Group is dedicated to maximizing equipment performance and reliability-centered maintenance programs. Pump related services include: Startup and commissioning Diagnostics and prognostics Routine and repair maintenance ANSI and ISO power end exchange program Re-rates, upgrades and retrofits Spare parts inventory and management programs Training

Pump Improvement Engineering Services Flowserve is committed to helping customers obtain the best possible return on their pump equipment investment. Engineering assistance and technological solutions for pumping problems are readily available.

These services include: Field performance testing Vibration analysis Design analysis and root-cause problem solving Material improvements Pump and system audit Advanced technology solutions PumpTrac remote pump monitoring and diagnostic services Instruction manual updates Training courses

Flowserve... Supporting Our Customers With The Worlds Leading Pump Brands

Jeumont-Schneider
USA and Canada Flowserve Corporation Pump Division Millennium Center 222 Las Colinas Blvd., 15th Floor Irving, Texas 75039-5421 USA Telephone: 1 972 443 6500 Telefax: 1 972 443 6800 Europe, Middle East, Africa Worthington S.P.A. Flowserve Corporation Via Rossini 90/92 20033 Desio (Milan), Italy Telephone: 39 0362 6121 Telefax: 39 0362 303396 Latin America and Caribbean Flowserve Corporation Pump Division 6840 Wynnwood Lane Houston, Texas 77008 USA Telephone: 1 713 803 4434 Telefax: 1 713 803 4497 Asia Pacific Flowserve Pte. Ltd. Pump Division 200 Pandan Loop #06-03/04 Pantech 21 Singapore 128388 Telephone: 65 6775 3003 Telefax: 65 6779 4607

Pump Division
Your local Flowserve representative:

To find your local Flowserve representative please use the Sales Support Locator System found at www.flowserve.com Or call toll free: 1 800 728 PUMP

Printed in U.S.A. January 2003 Flowserve Corporation