Scribd
Upload
49 views6 pages

Advance Workshop Practice 2021

This document outlines the examination structure for the subject 'Advance Workshop Practice and CNC Machine' for the 5th semester, including instructions for answering questions from two parts. Part A consists of multiple-choice and true/false questions, while Part B includes descriptive questions on topics such as open and closed loop systems, numerical control advantages, and CNC programming. The total marks for the exam are 35, with a time limit of one and a half hours.

Uploaded by

smatypie2006
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views6 pages

Advance Workshop Practice 2021

This document outlines the examination structure for the subject 'Advance Workshop Practice and CNC Machine' for the 5th semester, including instructions for answering questions from two parts. Part A consists of multiple-choice and true/false questions, while Part B includes descriptive questions on topics such as open and closed loop systems, numerical control advantages, and CNC programming. The total marks for the exam are 35, with a time limit of one and a half hours.

Uploaded by

smatypie2006
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Total No.

of printed pages = 6
END SEMESTER EXAMINATION- 2021
Semester: Sth
Subject Code : Me-504
ADVANCE WORKSHOP PRACTICE
AND CNC MACHINE
Fuil Marks - 35
Tirme - Onc and half hours
PART - A (Half hour)
PART - B (One hour)
The, figures in the margin indicate full marks
for the questions.
Instruction :
Answer all questions from PART-A and from
PART-B question uaber 11 and any four questions
from the rest.
PART - A
Marks - 12
1. Choose the corect answer from the following:
1x66
(). CNC machining centres do not include
operations like
(a) weldng (b) tapping
(c) miling (4) boring
[Tum over
(ii) Which of the following is not the advantage
of CNC machines ?

(a) Reduced scrap rate


bImproved strength of the components
(c) Higher flexibility
(0) Improved quality

(iii) Which machine tools are basically handled


and controlled by Computer Numerical
Control (CNC) machine especially at the
manufacturing sector ?
(a) Mills (b) Drilling
(c) Lathes (9 All of these
(iv) In CNC machine tool, the part program
entered into the computer memory
(a) can be used again and again
(b) can be used again but it has to be
modified every time
(c) can be used only once
() None of the above

117/Me-S04/AWP&CNCMc. (2)
(v) In CNC machining, what is the term used for
a set of instruction or blocks that can be
inserted into a program and repeated when
required ?

(a) diagnostics
(b) miscelaneous function
(c) programnable increment

(d) sub-program

(vi) Which of the following system has feedback


system ?

(a) Open loop system

b)- Closed loop system


(c) Dired loop system

(d) None of the above

2. State whether the following statements are true


or false: Ix6-6

)NC contouring is an example of point-to


point positioning,
117/Me-504/AWP&CNCMC. (3) [Tun over
turning lathes the machine zero point is
(ii) On stock.
generally at the dead centre of tail

machine tool, the part program


(ii) In CNC memory can be
entered into the computer
used only once.
Part-programming mistakes can be avoided
(iy machine tool.
in NC (Numerical Control)

(v)For CNC machining skilled part programmers


are needed.

An absolute NC system is one in which all


(vi)
coordinates are referred to one fixed
position
origin called the zero point.
PART-B
Marks - 23

and a
3. Distinguish between an open loop system 4
closed loop system.
of
4. What are the advantages and disadvantagcs 4
numerical control ?

5. Explain the diferences between continuous path


control, straight line and point to point positioning.

117Me-504/AWP&CNCMc. (4) 950(B)


6. Discuss the merits and denmerits of various types
of input elements. 4

7. Differentiate between absolute and incremental


coordinate system used in CNC part programming
with an cxample. 4
8. Discuss the factors to be considered while
selecting components for machining on CNC
machine tools. 4

9. Explain the use of following codes : 4

GO1, G71, G90, G94, G18, G33, MO3, MOS.


10. Write short notes : (any one) 4x]=4
(a) Differences between NC, CNC and DNC
'machines.
(6) Ball screw and Nut Assembly in CNC
machine.

(c) Classification of CNC machine.

) Basic components of a numerical control


System.

117/Me-504/AWP&CNCMc. (5) [Turn over


part programme for the vork piece (uny
J. Write a Fig. 2 using absolute
one) shovn in Fig. land
dimensioning. (Assume suitable machining data)?
90

4u
55

R15

(0.0)| 100

(AII dimensions are in mm)


Fig.-1.

Or

(0,0)
20 o16

110

Maximum depth of cut is 2mm


(All dimensions are in mm)
Fig.-2.
117/Me-504/AWP&CNCMC. (6) 950(B)

You might also like