1.
Construct an ellipse when the distance between focus and the directrix is 30 mm and
the eccentricity is ¾. Draw the tangent and normal at any point P on the curve
2. Draw an ellipse when the eccentricity is 2/3 and the distance of the focus from the
directrix is equal to 50 mm. Also draw a normal and tangent to a point on the ellipse
which is at a distance of 70 mm from the directrix
3. The focus of a conic is 50 mm from the directrix. Draw the locus of a point ‘p
moving in such a way that its distance from the directrix is equal to its distance from
the focus. Name the Curve. Draw a tangent to the Curve at a point 60 mm from the
directrix.
4. Draw locus of a point on the periphery of a circle having diameter of 50mm,which
rolls on straight line path. Name the curve and draw a tangent and normal to the
curve at any point of it
5. A string of length 155 mm is wound round a circle of radius 20 mm. Draw the path
traced by the end of the string. Also draw a tangent and normal to a point on the
involute
6. Construct the conic curve, if the locus of a point P which moves in a plane in such a way
that the ratio of its distances from a fixed point F and fixed straight line AB is always
2/3, the distance between the fixed point F and fixed straight line is 50 mm. Also draw
the tangent and normal on a point on the locus at a horizontal distance of 55 mm from
the fixed straight line.
7. Construct a hyperbola when the distance between the focus and directrix is 45 mm
and eccentricity is 5/4. Also draw the tangent and normal to any point on the curve
8. A coin of 35 mm diameter rolls in a straight line on a table .Plot and name the locus
point lying on the circumference of the coin
9. A circus man rides motor bike inside a globe of 6m diameter. the motor bike has the
wheel of 1m diameter. Draw the locus of the point on the circumference of the
motor-bike for one complete revolution. Adopt suitable scale.
10. Construct an epicycloid of a circle of 40 mm diameter that rolls on another circle of
diameter 150 mm for one revolution. Also draw a tangent and normal at any point
on the curve.
11. The distance between the fixed point and a fixed line is 54 mm. Trace the path of a
point moving in the same plane such that its distance between the fixed point and
the fixed line is always equal. If the point moves upto 72 mm from the fixed point,
plot the curve
12. An inelastic string of length 100 mm is wound around a circle of 25 mm
diameter.Draw the path traced by the end of the string when the string is unwound
around the circumference of the circle.
13. Draw the projections of the following points on the same XY line, keeping
convenient distance between each projectors. Name the quadrants in which they lie.
Point P - 20 mm above HP and 35 mm infront of VP.
Point Q - 30 mm above HP and 40 mm behind VP.
Point R - 40 mm above HP and on VP.
Point S - 35 mm below HP and 30 mm infront of VP
14. Construct the projection of points for the following conditions
a) Point P is 35 mm behind the VP and 20 mm below the HP
b) Point Q is 30 mm above the HP and 40 mm in front of VP.
c) Point R 50 mm behind the VP and 15 mm above the HP.
d) Point S is 40 mm below HP and in the VP
15. Draw the projections of the following points on the same XY line, keeping
convenient distance between each projectors. Name the quadrants in which they lie.
Point A - 30 mm above HP and 35 mm infront of VP.
Point B - 35 mm above HP and 40 mm behind VP.
Point C - 40 mm above HP and on VP.
Point D - 35 mm below HP and 30 mm infront of VP
16. The distance between the projectors of two points A and B is 70 mm. A is 15 mm
above the HP and 15 mm infront of VP.B is 50 mm above HP and 30 mm infront of
VP. Find the shortest distance between A and B by rotating line method. Find the
true inclination of AB with VP and HP
17. A line AB 90 mm long is inclined at 300 to the HP. Its’s end A is 12 mm above HP
and 20 mm infront of the VP. Its front view measures 65mm.Draw the top view of
AB and determine its inclination with the VP
18. A line 60mm long has one end 10 mm above HP and 20mm in front of VP. The line
is inclined at 300 to the HP and 450 to VP. Draw the projection and Also draw the
traces
19. One end P of a line PQ 70 mm long is 35 mm infront of VP and 25 mm above HP the
line inclined at 400 to the HP and 300 to the VP .Draw the projections of PQ
20. The top view of a 80 mm long line AB measures 65 mm, while the length of its front
view is 55 mm . Its one end A in the HP and 12 mm infront of the VP. Draw the
projections of AB and determine its inclination with HP and VP
21. A line 60mm long has one end 10 mm above HP and 20mm in front of VP. The line
is inclined at 350 to the HP and 500 to VP. Draw the projection and Also draw the
traces
