Scribd
Upload
7 views4 pages

Iot 7

The assignment sheet includes multiple-choice questions on electrical concepts such as types of current, Ohm's Law, and resistance calculations. It also provides instructions for building a circuit in Tinkercad with specific components and challenges related to voltage and current measurements. Lastly, it prompts research on the suitability of AC versus DC for long-distance transmission and their differences.

Uploaded by

Shronik Soni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views4 pages

Iot 7

The assignment sheet includes multiple-choice questions on electrical concepts such as types of current, Ohm's Law, and resistance calculations. It also provides instructions for building a circuit in Tinkercad with specific components and challenges related to voltage and current measurements. Lastly, it prompts research on the suitability of AC versus DC for long-distance transmission and their differences.

Uploaded by

Shronik Soni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Assignment Sheet

Session – 07
(Questions)

Question 1 :

MCQ:

1. Which type of current flows in one direction only?

A) AC

B) DC

C) Both AC and DC

D) None of the above

2.Ohm's Law relates which quantities together?

A) Current and voltage

B) Power and resistance

C) Neither A nor B

D) None of the above

3. A resistor has a voltage of 12 V across it and a current of 3 A flowing through it.


What is the resistance?

A) 4 ohms
Assignment Sheet
Session – 07
(Questions)
B) 12 ohms

C) 36 ohms

D) 15 ohms

4.What type of current reverses direction periodically?

A) DC

B) AC

C) Both A & B

D) None of the above

5.The SI unit for electric current is:

A) Volt (V)

B) Ampere (A)

C) Ohm (Ω)

D) None of the above

Question 2:

Circuit Analysis in TinkerCad

Components:
Assignment Sheet
Session – 07
(Questions)
● Battery (9V)
● Resistor 1 (220 Ω)
● Resistor 2 (470 Ω)
● Multimeter (set to both voltage and current)

Instructions to build circuit in Tinkercad:

1. Build the circuit in Tinkercad Circuits by connecting the battery to one end
of Resistor 1 and the other end of Resistor 1 to one end of Resistor 2.
Connect the other end of Resistor 2 back to the negative terminal of the
battery. This creates a series circuit.
2. Use the multimeter to measure the voltage across each resistor (voltage
between the two leads of each resistor). Record the values

Challenge:

1. What is the voltage across Resistor 1?


2. What is the voltage across Resistor 2?
3. Are the voltages across each resistor the same? Why or why not?
4. What is the current flowing through the entire circuit?
5. Based on your observations, can you explain the relationship between
current and voltage in a series circuit? (Hint: Ohm's Law)
Assignment Sheet
Session – 07
(Questions)
Question 3:

Conduct research on what makes one type of current more suitable for
long-distance transmission compared to the other and why? Additionally, explore
how the AC and DC differ and the implications of these differences for electrical
transmission.

You might also like