COLD ROLLED STEEL SHEET

COLD ROLLED STEEL SHEET

Cold rolled steel sheets offer a variety of outstanding properties, including easy formability and a smooth, clean surface, and are used in automobiles, appliances, furniture, and many other everyday items. JFE Steel Corporation who holds ISO9001, QS-9000 and ISO14001 certifications, produces a full range of cold rolled products for these and other applications. Because strict quality requirements are now applied to meet the needs of improved product functions, JFE has adopted an integrated quality control system. Customer requirements are reflected in products from the quality design stage in order to supply customers with the optimum material for each application in a timely manner. Based on a wealth of experience and an advanced production system, JFE is continuing to develop new technologies and products which meet the needs of the times.

Characteristics
Superior workability
JFEs cold rolled products have excellent formability and minimal deviation in mechanical properties thanks to the companys accumulated technical exper tise, newly constructed and modernized facilities and innovative technologies, and integrated quality control system extending from raw materials to the final product.

Wide range of sizes

The available size range includes thickness from 0.14mm to 3. 2 mm and width up to 1,850mm.

Superior shape
Applying tension leveler ensures superior strip flatness.

Superior surface quality and dimensional accuracy

Modern facilities, advanced operational technologies, strict inspection, and integrated quality control ensure excellent surface quality. Dimensional accuracy is guaranteed by an automatic thickness control system using advanced numerical models.

Outstanding technical service

To m e e t t h e r e q u i r e m e n t s of diver s e client s, JFE ha s established a complete technical servicing system with advises clients on questions ranging from material proper ties to processing technologies.

Wide range of product standards

JFE produces cold rolled products to meet a wide range of product standards, including JIS and other public standards, as well as internal JFE standards. Products range from general use, including extra deep drawing quality and bake hardening sheets, to high strength sheets and sheets for enameling and other special applications.

Cold rolled steel sheet

Contents

Manufacturing process 2 Correspondence with JFE standards to public standards 4 Product Standards, Characteristics and Application 5 JFE Standards 8 Dimensional and shape tolerances 18 Available product size range 20 Surface finish and strip edge 24 Packaging and labeling 25 Remarks on product use and handling precautions / Instructions for ordering 26 (Appendix) Extracts from Japanese Industrial Standard (JIS) (1) 27 (Appendix) Extracts from Japanese Industrial Standard (JIS) (2) 28

COLD ROLLED STEEL SHEET

COLD ROLLED STEEL SHEET

Manufacturing process

Fully continuous cold strip mill

Annealing The formability of products is determined by annealing. Because cold rolling significantly increases material hardness, making forming difficult, annealing is performed to improve ductility by inducing a recrystallized structure in the steel. As the annealing process, coils are piled and covered by the box and annealed and this is called the batch annealing. The other is the continuous annealing process, in which coils are continuously treated. JFE uses two annealing technologies, depending on product requirements. JFE is among the worlds leaders in process technology for the continuous annealing line (CAL), and has also used the CAL to develop a wide range of new products, from 1500N/mm2 high strength steel to non-aging extra deep drawing grade. JFEs advanced CALs are highly computerized and feature automatic quality assurance equipment, such as an automatic surface inspection device which was developed by JFE. Skinpass rolling Annealed coils are lightly rolled by the skinpass mill to prevent a defect called stretcher strain, improve strip shape, and adjust mechanical properties. Skinpass rolling is also used to produce dull finish and bright finish products. Finishing After skinpass rolling, coils are processed at the recoiling line, where they are cut to produce product coils of the specified weight, or at the shearing line, where they are cut to sheets of the specified dimensions. Product thickness, width, shape, and surface quality are inspected, and mechanical properties are tested using specimens taken at the finishing line.

Lime stone

Iron ore

Coke

Continuous annealing line

Blast furnace

Converter

Skinpass mill

Vacuum degasser

Reheating furnace

Continuous caster

Scale breaker

Rougher

Finishing train

Shearing line Cold rolled sheet Box annealing Electrolytic cleaning line Recoiling line Open coil annealing Pickling line Continuous cold strip mill Skinpass mill Cold rolled coil Continuous annealing line Cold rolled coil (As-rolled) Cold rolled slit coil Cold rolled coil

Manufacturing process

Cold rolling The thickness accuracy of cold rolled products is determined by the cold rolling process. Rolling force and strip tension are computer-controlled to minimize thickness deviations during rolling, based on measurements of the strip thickness at the entry and delivery sides of the mill.

Cleaning Rolling oil on the cold rolled strip is burned off during annealing, which is the next process after cold rolling. Other types of rolling oil are removed by electrolytic cleaning prior to annealing. In particular, electrolytic cleaning is used with products which require a clean surface to ensure good paintability.

Manufacturing process

COLD ROLLED STEEL SHEET

Correspondence with JFE standards to public standards

Classification

JFE standard

JIS

ASTM

Others

Steel sheets for general uses

JFE-CC JFE-CD JFE-CE

G3141

SPCC SPCD SPCE

A109 A1008

BS1449 Part1 DIN1623-2 BS EN10130 DIN EN10130 BS EN10139 DIN EN10139

High strength steel sheets Atmospheric corrosion resistance steel sheets Corrosion resistance steel sheets

JFE-CA

G3135

SPFC

A980 A1008 A606 BS EN10155 DIN EN10155

JFE-CCUP

G3125

SPA-C

JFE-ASA G3133 SPP A424 BS EN10209 DIN EN10209

Correspondence with JFE standards to public standards

4

Steel sheets for porcelain enameling Steel sheets for electric wire sheath Steel sheets for galvanizing

JFE-CPE

JFE-HWD

JFE-HKT

Steel sheets without annealing Steel sheets in high temperature atmosphere

JFE-CNA

JFE-CHCR

COLD ROLLED STEEL SHEET

Product Standards, Characteristics and Application

JFE Steel is producing wide range of products which have excellent characteristics based on the public standards like Japanese Industrial Standard(JIS) to original JFE standard, at the East Japan Works (Chiba and Keihin plants) and the West Japan Works (Fukuyama and Kurashiki plants).

Public Standard Products

JFE Steel is producing products based on following public standards. Japanese Industrial Standard (JIS)
Classification G 3141 Cold-reduced carbon steel sheets and strip Cold rolled high strength steel sheets with improved formability for automobile structure use Superior atmospheric corrosion resisting rolled steels Designation SPCC-T SPCC SPCE SPCF SPCD SPFC SPFC***Y SPFC***H SPA-C Characteristics and Application Best suited for automobiles, electrical appliances, etc. due to wider workable ranges from commercial to deep drawing qualities. Mainly used for automobiles due to high strength and improved formability. Best suited for rolling stock bodies or constructions due to superior atmospheric corrosion resistance.

G 3135

G 3125

The Japan Iron and Steel Federation Standard (JFS)

Classification A 2001 Cold rolled steel sheets for automobile use Designation JSC Characteristics and Application Specifying cold rolled steel products for automobile use (General use to high strength steel)

Product Standards, Characteristics and Application

COLD ROLLED STEEL SHEET

COLD ROLLED STEEL SHEET

JFE Standard Products

JFE Steel is producing cold rolled steel sheets for general use, high strength steel sheets and cold rolled steel sheets for special use based on JFE standards. Cold rolled steel sheets for general use
Classification Commercial quality Drawing quality Deep drawing quality 1 Deep drawing quality 2 Extra deep drawing quality Ultra deep drawing quality Bake hardenability quality Deep drawing quality with bake hardenability Designation JFE-CC JFE-CD JFE-CE JFE-CF 89 JFE-CG JFE-CGX JFE-CEH JFE-CGH JFE produces six grades of cold rolled soft steel products, ranging from commercial quality JFECC (equivalent to JIS-SPCC) to extra deep drawing quality JFE-CG, which is superior to JIS-SPCF, and ultra deep drawing quality JFE-CGX, which features an extremely high plastic strain ratio (mean r-value). JFE also produces two grades of bake handenable (BH) cold rolled steel products which have a increased yield point during baking after painting. Pages Characteristics and Application

Cold rolled steel sheets for special use

Classification Cold rolled steel sheets for porcelain enameling Cold rolled steel sheets for electric wire sheath Cold rolled steel sheets for galvanizing Cold rolled steel sheets without annealing Cold rolled corrosion resistance steel sheets Cold rolled atmospheric corrosion resistance high strength steel sheets Cold rolled steel sheets in high temperature atmosphere Designation JFE-CPE Pages 14 Characteristics and Application Chemical compositions are adjusted for porcelain enameling use. General use or deep drawing, 1-coat or 2-coat usages are available. Products especially developed for electric wire sheathing. Superior for welding and working. Annealed cold-rolled sheet as the mother material for galvanizing is available. Non-annealed cold-rolled sheet of thinner gages are available. Suitable for application needed strength without forming. Having superior resistance against sulfuric acid corrosion and atmospheric corrosion. Suitable to the air pre-heater of boilers, heat exchangers, chemical plants and exhaust chambers. Having the superior corrosion resistance without painting due to the stable oxide lm. Suitable to rolling stock bodies and structures. Having superior anti-oxidation properties and keeping strength under C). high temperature(450-600 Suitable to application like chimney ducts, needed heat resistance and workability.

JFE-CWD

15

JFE-CKT

15

JFE-CNA

16

JFE-ASA

16

JFE-CCUP

17

Cold rolled high strength steel sheets

Classification Designation Pages Tensile Strength ( N/mm2 ) 340

370

390

440

490

540

590

780

980

1180

1370

1470

Characteristics Suitable for general processing like drawing or bending. Applying the water-quenching by a continuous annealing process, maximum 1,470N/mm2 tensile strength is available. Superior in deep drawability and bake-hardening. Suitable for outer parts of automobiles which require anti-dent properties. Superior ductility and suitable to drawing application. Having excellent ductility and high r-value, suitable materials for deep drawing. Adding excellent r-value and ductility with attaining super fine grain structure, suitable materials for extra deep drawing because of having good secondary-embrittlement resistance. Having excellent ductility and high stretch ange formability, suitable for drawing with ange expansion forming.

Application for automobile

Structure Reinforce Outer panel Outer panel Inner part Outer panel Inner part Outer panel Inner part Structure Reinforce

Commercial quality Deep drawing quality with bake hardenability Drawing quality Deep drawing quality Extra deep drawing quality High stretch flange formability quality Low yield ratio quality type 1 Low yield ratio quality type 2 High elongation quality

JFE-CA JFE-CAH JFE-CAF JFE-CAP

JFE-CAG

10 13

JFE-CASF JFE-CAY1 JFE-CAY2 JFE-CAA

Having excellent ductility and high work hardening coefcient, suitable material for deep drawing processing.

Structure Reinforce

Applying TRIP (Transformation Induced Plasticity) effects, excellent ductility and work hardening coefcient are achieved at the high strain range.

Structure Reinforce

Product Standards, Characteristics and Application

JFE-CHCR

17

Product Standards, Characteristics and Application

COLD ROLLED STEEL SHEET

COLD ROLLED STEEL SHEET

JFE Standards
Cold rolled steel sheets for general use JFE-C
JFE produces six grades of cold rolled soft steel products, according to formability, ranging from commercial quality JFE-CC (equivalent to JIS-SPCC) to extra deep drawing quality JFE-CG, which is superior to JIS-SPCF, and ultra deep drawing quality JFE-CGX, which features an extremely high plastic strain ratio (mean r-value). JFE also produces two grades of bake-hardening (BH) cold rolled sheets, which display yield point increase when baked after painting.
Relation between elongation and average plastic strain ratio (mean r-value) of cold rolled steel
Thickness : 0.8mm 2.5 Ultra deep drawing

Comparison of height of cups cylinder between extra deep drawing and ultra deep drawing quality Extra deep drawing Ultra deep drawing

Average plastic strain ratio (Mean r -value)

Extra deep drawing 2.0 Deep drawing 2 1.5 Deep drawing 1 Drawing 40 50 Elongation (%) 60

Automobile part (Front fender)

Automobile part (Side panel outer)

Mechanical Properties
Tensile Test Yield Point min. (N/mm2) Classification Designation 0.4 < 0.8 Commercial quality Drawing quality Deep drawing quality 1 Deep drawing quality 2 Extra deep drawing quality Ultra deep drawing quality Bake hardenability quality Deep drawing quality with bake hardenability JFE-CC JFE-CD JFE-CE JFE-CF JFE-CG JFE-CGX JFE-CEH JFE-CGH 135 135
145

Thicknessmm 0.8 < 1.0

135

1.0 3.2
125

Tensile Strength min. (N/mm2)

270

Elongation min. (%) Thicknessmm 0.4 < 0.6

37

Mean r-value min. Thicknessmm 1.6 < 2.0

42

BH Value min. (N/mm2)

0.6 < 0.8

38

0.8 < 1.0

39

1.0 < 1.2

40

1.2 < 1.6

41

2.0 < 2.5

43

2.5 3.2
44

0.5 1.0
1.2 1.4 1.6

1.0<
1.6 1.1 1.3 1.5

135 130 120 100 100

125 120 110

115 110 100 90 90

270 270 270 260 260 270 260

40 42 44 46 46 40

41 43 45 47 47 41 44

42 44 46 48 48 42 45

43 45 47 49 49 43 46

44 46 48 50 50 44

45 47 49 51

46 48 50 52

47 49 51

1.8 2.1
1.4 1.6

1.7 2.0
1.3 1.4

125 125

115 115

45

30 30

Reference1. JIS No.5 test piece for tensile test taken in rolling direction. 2. For thickness less than 0.6mm, the above tests are omitted if not specically requested. 3. Figures in parentheses are reference values.

Dimensional tolerance Size tolerances conform JIS G 3141(Cold-reduced carbon steel sheets and strip). Refer to page 18.

Available product size range The available size range is shown on page 20.

JFE Standards

JFE Standards

COLD ROLLED STEEL SHEET

COLD ROLLED STEEL SHEET

Cold rolled high strength steel sheets (1) JFE-CA

Cold rolled high strength steel sheets produced by JFE have varieties from a commercial quality to an extra deep drawing quality. Applying the original JFE technology of the continuous annealing line, a wide range of tensile strength from 340N/mm2 class to 1,470N/mm2 class is available.

Automobile part (Door assembly)

Automobile part (Door outer)

Mechanical Properties
Tensile Test Yield Point min. (N/mm2) Thicknessmm 0.4 < 0.8 Commercial quality Commercial quality JFE-CA340 JFE-CA370 JFE-CA390 JFE-CA440 JFE-CA490 JFE-CA590 JFE-CA780 JFE-CA980 JFE-CA1180 JFE-CA1370 JFE-CA1470 JFE-CA340H JFE-CA340F JFE-CA370F JFE-CA390F JFE-CA440F JFE-CA340P JFE-CA370P JFE-CA390P JFE-CA440P JFE-CA340G JFE-CA370G JFE-CA390G JFE-CA440G 205 205 245 285 305 430 420 600

Classification

Designation

0.8 < 1.0 195 195 235 275 295 420 410 590

1.0 3.2 185 185 225 265 285 410 400 580 825 950 1000 165 165 175 205 245 145 155 185 225 135 145 175 215

Tensile Strength min. (N/mm2) 340 370 390 440 490 590 780 980 1180 1370 1470 340 340 370 390 440 340 370 390 440 340 370 390 440

Elongation min. (%) Thicknessmm 0.4 < 0.6 33 30 29 26

Mean r-value min. Thicknessmm 1.6 < 2.0 2.0 < 2.5 38 35 34 31 26 18

BH Value min. (N/mm2)

0.6 < 0.8 34 31 30 27 23 17 12

8

0.8 < 1.0 35 32 31 28 24

1.0 < 1.2 36 33 32 29 25

1.2 < 1.6 37 34 33 30 25

2.5 3.2

0.5 1.0
1.5 1.4 1.4 1.4 1.3

1.0 <
1.6 1.4 1.3 1.3 1.3 1.2 1.4 1.4 1.4 1.3

Hole Expanding Ratio min. %

Commercial quality Commercial quality Commercial quality Commercial quality Commercial quality Commercial quality Commercial quality Commercial quality Commercial quality Deep drawing quality with bake hardenability Drawing quality Drawing quality Drawing quality Drawing quality Deep drawing quality Deep drawing quality Deep drawing quality Deep drawing quality Extra deep drawing quality Extra deep drawing quality Extra deep drawing quality Extra deep drawing quality

13
9

14
10 6

15
11 7 5

16
12 8

185 185 195 225 265 165 175 205 245 155 165 195 235

175 175 185 215 255 155 165 195 235 145 155 185 225

34 33 31 29 26 35 33 31 28 35 33 31

35 34 32 30 27 36 34 32 29 36 34 32 29

36 35 33 31 28 37 35 33 30 37 35 33 30

37 36 34 32 29 38 36 34 31 38 36 34 31

38 37

39 38 35

30

33 30 39 37 35 32 39 37 35 32 40 38 36 33 40 38 36 33

34 31

1.5 1.5 1.5 1.4

1.7 1.7 1.7 1.6

1.6 1.6 1.6 1.5

Reference 1. JIS No.5 test piece for tensile test taken transverse to rolling direction. 2. For thickness less than 0.6mm, the above tests are omitted if not specically requested. 3. Figures in parentheses are reference values.

10

11

JFE Standards

JFE Standards

COLD ROLLED STEEL SHEET

COLD ROLLED STEEL SHEET

Cold rolled high strength steel sheets (2) JFE-CA

Mechanical Properties (Cont.)
Tensile Test Yield Point min. (N/mm2) Thicknessmm 0.4 < 0.8 High stretch flange formability quality High stretch flange formability quality High stretch flange formability quality High stretch flange formability quality JFE-CA440SF JFE-CA590SF JFE-CA780SF JFE-CA980SF 320 430

Classification

Designation

0.8 < 1.0 310 420

1.0 3.2 300 410 500 630 875 215 305 400 530 710 305 360 530 710

Tensile Strength min. N/mm2 440 590 780 980 1180 440 590 780 980 1180 590 780 980 1180 590

Elongation min. % Thicknessmm 0.4 < 0.6

Mean r-value min. Thicknessmm

0.6 < 0.8 24 17

0.8 < 1.0 25

1.0 < 1.2 26

1.2 < 1.6 27 18

1.6 < 2.0

2.0 < 2.5 28

2.5 3.2

0.5 1.0

1.0 <
1.6

Hole BH Value Expanding Ratio min. N/mm2 min. %

80 60 50 40 40

14 10 7

High stretch flange formability quality JFE-CA1180SF Low yield ratio quality type 1 Low yield ratio quality type 1 JFE-CA440Y1 JFE-CA590Y1 JFE-CA780Y1 JFE-CA980Y1 JFE-CA1180Y1 JFE-CA590Y2 JFE-CA780Y2 JFE-CA980Y2 JFE-CA1180Y2 JFE-CA590A JFE-CA780A

235

225 315

29

30 21

31 23 14 10

32 23 15 11 7 25 20 13 9 30 24 21 14 10

33 24 16

Low yield ratio quality type 1 Low yield ratio quality type 1 Low yield ratio quality type 1 Low yield ratio quality type 2 Low yield ratio quality type 2 Low yield ratio quality type 2 Low yield ratio quality type 2 High elongation quality type Retained austenite High elongation quality type Retained austenite

325

315

22

23

24 19 12 8 29 23

26

355

27

28

31 25

400

780

Reference 1.JIS No.5 test piece for tensile test taken transverse to rolling direction. 2.For thickness less than 0.6mm, the above tests are omitted if not specically requested. 3.Figures in parentheses are reference values.

Dimensional tolerance Size tolerances conform JIS G 3141(Cold-reduced carbon steel sheets and strip). Refer to page 18. Available product size range Available size range is shown on page 21.

Automobile part (Body in white)

Automobile part (Center pillar inner)

12

13

JFE Standards

JFE Standards

COLD ROLLED STEEL SHEET

Cold rolled steel sheets for porcelain enameling JFE-CPE

JFEs cold rolled steel sheets for porcelain enameling are for general use, deep drawing quality and for 1-coat, 2-coat depending on application. Chemical compositions of the steel are severely controlled. Manufacturing Standard
Classification 1-Coat Drawing 1 Drawing 2 Flat sheet use 2-Coat, 2-Bake Commercial use Drawing Deep drawing Designation JFE-CPE1D1 JFE-CPE1D2 JFE-CPE2P JFE-CPE2C JFE-CPE2D JFE-CPE2E As wall material P 0.008 0.008 0.012 0.013 0.011 0.008 S 0.018 0.018 0.015 0.013 0.007 0.030 Al

Typical Chemical Composition ( wt.%)

Designation JFE-CPE1D1 JFE-CPE1D2 JFE-CPE2P JFE-CPE2C JFE-CPE2D JFE-CPE2E C 0.0012 0.0015 0.0030 0.0230 0.0504 0.0020 Si 0.01 0.01 0.01 0.01 0.02 0.01 Mn 0.29 0.25 0.25 0.18 0.15 0.25 N 0.0018 0.0080 0.0080 0.0060 0.0077 0.0080 O 0.055 0.020 0.014

Cu 0.030 0.030 0.030 0.030 0.030 0.035

Others

added added added added added

0.050 0.055 0.040

JFE Standards
14

Mechanical Properties
Mean r-value Elongation min. % min. Tensile Thickness Strength Designation Thicknessmm Thicknessmm mm min.. 0.4 0.8 1.0 N/mm2 0.2 0.5 0.6 0.8 1.0 1.2 1.6 2.0 2.3< 2.5 0.5 1.2 <0.8 < 1.0 3.2 <0.5 <0.6 <0.8 <1.0 < 1.2 < 1.6 < 2.0 <2.3 < 2.5 3.2 < 1.2 1.6 Yield point min. N/mm2 JFE-CPE1D1 JFE-CPE1D2 JFE-CPE2P JFE-CPE2C JFE-CPE2D JFE-CPE2E 135 135

125 125

115 115

270 270 275 270 270 275

39 39 30 30 39 43

40 40 35 37 40 44

41 41 36 38 41 45

42 42 36 39 42 46

43 43 38 40 43 47

44 44 38 41 44 48

45 45 39 42 45 49

46 46 39 43 46 50

46

47 1.21.1
1.21.1

40 43

40 44

145 135 120

135 125 110

125 115 100

1.21.1

50

51

1.6

1.5

Reference1.JIS No.5 test piece for the tensile test taken to the rolling direction. 2. In case of thickness less than 0.6mm, above tests are skipped if not requested. 3. Figures in the parentheses are the reference values.

Example of Mechanical Properties

Designation JFE-CPE1D1 JFE-CPE1D2 JFE-CPE2P JFE-CPE2C JFE-CPE2D JFE-CPE2E Thickness mm 0.80 1.00 0.30 0.50 1.20 0.80 Yield point (N/mm2) 165 165 252 201 161 148 Tensile Strength Elongation (%) (N/mm2) 282 51.4 313 351 325 286 307 46.0 39.0 41.8 51.7 49.0 Mean r-value 1.50 1.77

n-Value 0.22 0.26

1.42 1.64 2.16

0.21 0.25 0.27

Dimensional tolerance

Size tolerances conform JIS G 3141(Cold-reduced steel sheets and strip). Refer to page 18. Available size range is the same as for JFE-CF. Refer to page 20.

Available product size range

COLD ROLLED STEEL SHEET

Cold rolled steel sheets for electric wire sheath

JFE-CWD

Developed by JFE for electric wire sheathing and has good weldability and workability. Mechanical Properties
Tensile Test Designation Yield Point min. N/mm2

Tensile Strength min. N/mm2 270

Elongation min. (%) Thicknessmm 0.4 , < 0.6 35 0.6 , < 0.8 37 0.8 , 1.0

JFE-CWD

Reference1. JIS No.5 test for the tensile test piece taken to the rolling direction.

Dimensional tolerance Size tolerances conform JIS G 3141(Cold-reduced steel sheets and strip). Refer to page 18. Available product size range

Cold rolled steel sheets for galvanizing

Annealed cold rolled steel sheets are available for galvanizing. Mechanical Properties
Tensile Test Yield Tensile Point Strength min. min. N/mm2 N/mm2

JFE-CKT

Elongation min. (%) Thicknessmm 0.4 < 0.6

30

Designation

0.6 < 0.8

32

0.8 < 1.0

32

1.0 < 1.2

33

1.2 < 1.6

33

1.6 < 2.0

34

2.0 < 2.5

34

2.5 3.2
35

JFE-CKT

Reference1. JIS No.5 test piece for the tensile test taken to the rolling direction. 2. Figures in the parentheses are the reference values.

Dimensional tolerance Size tolerances conform JIS G 3141(Cold-reduced steel sheets and strip). Refer to page 18. Available product size range Available size range is the same as for commercial quality JFE-CC. Refer to page 20.

15

JFE Standards

Strip thickness from 0.30mm to 1.00mm and strip widths from 610mm to 1,600mm are available. Strip products are available in widths of 50mm to 200mm.

COLD ROLLED STEEL SHEET

Cold rolled steel sheets without annealing JFE-CNA

It is suitable for application which needs only toughness and no working. Dimensional tolerance Size tolerances conform JIS G 3141(Cold-reduced steel sheets and strip). Refer to page 18. Available product size range Available size range is shown on page 22.

Cold rolled corrosion resistance steel sheets JFE-ASA

It has superior corrosion resistance against sulfuric acid and superior atmospheric corrosion resistance. It is suitable to the air pre-heater of boilers, heat exchangers and chimney ducts, etc. Chemical Composition( wt.%)
Designation C 0.14max. 0.17max. Si 0.55max. 0.55max. Mn P S Cu Ni 0.50max. 0.50max. Cr 0.50-1.00 0.50-1.00 Sb 0.05-0.20 0.05-0.20 Sn 0.10max. 0.10max. Mo 0.10max. 0.10max.

JFE Standards
16

JFE-ASA400W JFE-ASA440W

0.30-0.70 0.030max. 0.020max. 0.25-0.50 0.30-0.70 0.030max. 0.020max. 0.25-0.50

Mechanical Properties
Tensile Test Designation Yield Point min. (N/mm2) 245 265 Tensile Strength min. (N/mm2) 400 440 Elongation min. (%) 22 22

JFE-ASA400W JFE-ASA440W

Reference1. JIS No.5 test piece for the tensile test taken transverse to the rolling direction. 2. The bend test is available depending on a demand. JIS No.3 test piece for the bend test taken transverse to the rolling direction.

Dimensional tolerance Size tolerances conform JIS G 3141(Cold-reduced steel sheets and strip). Refer to page 18. Available product size range Available size range is shown on page 22.

COLD ROLLED STEEL SHEET

Cold rolled atmospheric corrosion resistance high strength steel sheets JFE-CCUP
Have unpainted corrosion resistance due to formation of a stable oxidation film on the strip surface. Suitable for rolling stock bodies and exposed structures. Chemical Composition( wt.%)
Designation JFE-CCUP C 0.12max. Si 0.25-0.75 Mn 0.20-0.50 P 0.07-0.15 S 0.040max. Cu 0.25-0.60 Ni 0.65max. Cr 0.30-1.25

Mechanical Properties
Tensile Test Designation Yield Point min. (N/mm2) 315 Tensile Strength min. (N/mm2) 450 Elongation min. (%) 26

JFE-CCUP

Reference1.JIS No.5 test piece for the tensile test taken transverse to the rolling direction.

Dimensional tolerance Size tolerances conform JIS G 3141(Cold-reduced steel sheets and strip). Refer to page 18. Available product size range Available size range is shown on page 23.

Cold rolled steel sheets in high temperature atmosphere JFE-CHCR

Have cold formability and anti-oxidation properties combined with adequate high temperature strength (450-600C). Suitable for applications which require heat resistance and cold formability, such as chimney ducts. Chemical Composition( wt.%)
Designation JFE-CHCR C 0.10max. Si

Mn

Cu

Ni

Cr

Sb

Sn

0.40max. 0.035max. 0.035max.

Including other chemicals

Mechanical Properties
Tensile Test Designation Yield Point min. (N/mm2)

Tensile Strength (N/mm2)

310-410

Elongation min. (%)

36

JFE-CHCR

Reference 1. JIS No.5 test piece for tensile test taken in rolling direction. 2. Figures in parentheses are reference values.

Dimensional tolerance Size tolerances conform JIS G 3141(Cold-reduced steel sheets and strip). Refer to page 18. Available product size range Available size range is shown on page 23.

17

JFE Standards

COLD ROLLED STEEL SHEET

Dimensional and shape tolerances

Dimensional and shape tolerances as specified in JIS G 3141 (Cold-reduced carbon steel sheets and strip) are shown below. Normally, Table A is applied to thickness, width, and length tolerances. When stricter tolerances are required, Table B is applied. Thickness tolerance Thickness is measured at the normal point in case of strips or coils, and at any point 15mm from the strip edge in case of sheets.

Table A
Width Thickness 0.25 > 0.25 , < 0.40 0.40 , < 0.60 0.60 , < 0.80 0.80 , < 1.00 1.00 , < 1.25 < 630
0.03 0.04 0.05 0.06 0.06 0.07 0.08 0.10 0.12 0.14 0.16

Unit mm 630 < 1000

0.03 0.04 0.05 0.06 0.06 0.07 0.09 0.11 0.13 0.15 0.17

1000 < 1250

0.03 0.04 0.05 0.06 0.07 0.08 0.10 0.12 0.14 0.16 0.19

1250 < 1600

0.06 0.06 0.08 0.09 0.11 0.13 0.15 0.17 0.20

1600
0.07 0.09 0.11 0.13 0.15 0.17 0.20

Dimensional and shape tolerances

18

1.25 , < 1.60 1.60 , < 2.00 2.00 , < 2.50 2.50 , < 3.15 3.15

Table B
Width Thickness < 0.1 0.10 , < 0.16 0.16 , < 0.25 0.25 , < 0.40 0.40 , < 0.60 0.60 , < 0.80 0.80 , <1.00 1.00 , < 1.25 1.25 , < 1.60 1.60 , < 2.00 2.00 , < 2.50 2.50 , < 3.15 3.15 < 160
0.010 0.015 0.020 0.025 0.035 0.040 0.04 0.05 0.05 0.06 0.07 0.08 0.09

Unit mm 160 < 250

0.020 0.020 0.025 0.030 0.040 0.045 0.05 0.05 0.06 0.07 0.08 0.09 0.10

250 < 400

0.030 0.035 0.040 0.045 0.05 0.05 0.06 0.08 0.08 0.09 0.10

400 < 630

0.030 0.035 0.040 0.045 0.05 0.06 0.06 0.08 0.09 0.10 0.11

COLD ROLLED STEEL SHEET

Width tolerance Width is measured at the normal point in case strips and coils, and at any point in case of sheets.
Table A
< 1250 +7 0 1250 +10 0
Unit mm

Table B
< 1250 +3 0 1250 +4 0

Unit mm

Length tolerance Length is measured at any point in case of sheets

Table A Length < 2000 2000 , < 4000 4000 , < 6000 Tolerance +10,0 +15,0 +20,0 Unit mm Table B Length < 1000 1000 , < 2000 2000 , < 3000 3000 , <4000 Tolerance +3,0 +4,0 +6,0 +8,0
Unit mm

Flatness The maximum value of flatness is shown below. The flatness tolerance shall be classified into class A and class B as given Table A and Table B, respectively. These tables shall be applied to the steel sheet of standard temper grade which is 500mm or over in width during cold rolling. Flatness shall be measured by lying a steel sheet under its own mass on flat surface plate, and the value of flatness shall be determined as the difference between the maximum deviation of convex from the flat surface and the nominal thickness of the steel sheet when its convex side is upper-most.

Table A Strain Width < 1000 1000 , < 1250 1250 , < 1600 1600 Warp 12 15 15 20 EdgeWave 8 9 11 13

Unit mm Buckle 6 8 8 9

Table B Strain Width < 1000 1000 , < 1250 1250 , < 1600 1600 Warp 2 3 4 5 EdgeWave 2 2 3 4

Unit mm Buckle 2 2 2 2

ReferenceTable is not applied to the strip processed by a stretch leveler.

Camber Strip,Band Width 30 ,< 60 60 ,< 630 630 8 4 2 Strip Length < 2000 Length 2000

Unit mm Band

At any length of 2000 8

4 2

ReferenceTable is not applied to the abnormal portion.

19

Dimensional and shape tolerances

COLD ROLLED STEEL SHEET

Available product size range

Examples of the available products size range are shown below. Other size outside the available range and products not shown here are subject to negotiation.

Applicable StandardJFE-CC
3.5 3.2508 3.0 2.61829 2.5 Strip thickness(mm) 3.21600

2.0

1.5

Available range

1.61850

1.0

Strip thickness(mm)

Available product size range

20

0.5 0.3508 0.2610 0.0 0 500 1000 Strip width(mm) 0.21000 1500

0.51850 0.31829 2000

Applicable StandardJFE-CF
3.5 3.2508 3.0 2.61829 2.5 3.21600

2.0

1.5

Available range

1.61850

1.0

0.5

0.5508 0.4650

0.431250 0.41050 1000 Strip width(mm) 1500

0.51850

0.0

500

2000

COLD ROLLED STEEL SHEET

Other size outside the available range and products not shown here are subject to negotiation.

Applicable StandardJFE-CA340
3.5 3.2508 3.0 2.61829 2.5 Strip thickness(mm) 3.21600

2.0

Available range
1.5

1.61850

1.0

0.5

0.5508

0.51850

0.0

500

1000 Strip width(mm)

1500

2000

Applicable StandardJFE-CA440
3.5

3.0 2.7750 2.6700 2.5 Strip thickness(mm) 2.4650 2.71000 2.61300 2.41350 2.31450 2.01650 1.61829

2.0

1.5

Available range

1.0

1.21829 1.01650 0.61600 0.51550

0.5

0.5650

0.0

500

1000 Strip width(mm)

1500

2000

21

Available product size range

COLD ROLLED STEEL SHEET

Examples of the available products size range are shown below. Other size outside the available range and products not shown here are subject to negotiation.

Applicable Standard JFE-CNA

3.5 3.2650 3.0 3.21600 2.91625 2.61850 2.5 Strip thickness(mm)

2.0

1.5

Available range

1.0

Strip thickness(mm)

Available product size range

22

0.5 0.15650 0.0 0 500 1000 Strip width(mm) 0.21230 0.151000 1500 0.31850 2000

Applicable Standard JFE-ASA

3.0 2.7750 2.6610 2.5 2.71000 2.61829

2.0

1.5

Available range

1.0 0.8610 0.5 0.81829 0.61600 0.5650 0.51550

0.0

500

1000 Strip width(mm)

1500

2000

COLD ROLLED STEEL SHEET

Other size outside the available range and products not shown here are subject to negotiation.

Applicable StandardJFE-CCUP
3.0 2.7750 2.5 2.4650 2.3508 2.71000 2.61300 2.41350 2.31600

Strip thickness(mm)

2.0

1.5

Available range

1.0

0.5

0.61600 0.51550

0.5650

0.0

500

1000 Strip width(mm)

1500

2000

Applicable StandardJFE-CHCR
3.5 3.2610 3.0 3.21219

2.5 Strip thickness(mm)

2.0

Available range

1.5

1.0

0.5

0.6610

0.61219

0.0

500

1000 Strip width(mm)

1500

2000

23

Available product size range

0.65508

COLD ROLLED STEEL SHEET

Surface finish and strip edge

Surface finish
Classification Designation Characteristics

Dull finish

SD

Finished with rough (dull ) surface rolls which are processed mechanically or chemically. Dull surface products are widely used to improve pressing performance by ensuring even distribution of press oil and to improve paint adhesion. It is equivalent to D nish in JIS.

Bright finish

SB

Finished with smoothly polished rolls. Bright products are suitable for application which require attractive luster, such as metallic coated surfaces and for lightly painted surfaces. It is equivalent to B nish in JIS. Products brighter than JIS bright nish are also available and are subject to negotiation.

Reference 1. Normally dull nish is applied. Detailed discussion is requested for bright nish. 2. Not available in as-annealed products. 3. Other surface classications are subject to negotiation.

Surface finish and strip edge

24

Strip edge
Classification Contents Products are normally edge trimmed at the pickling line and then cold rolled, and edge trimming is not performed at the nishing line. This is the standard edge specication for coil products. (However, edge trimming may be performed at the nishing line for operational reasons, even when mill edge is specied.)

Mill edge

Cut edge

Edge trimming is performed at the shearing line or slitting line. (Standard edge specication for cut sheet products).

COLD ROLLED STEEL SHEET

Packaging and labeling

Packaging Cold rolled products are packaged according to applicable standards and preserved in a properly controlled environment until shipment.
Example of coil package

Labeling Labels showing the product standard, dimensions, mass and product serial no. are attached to the product. Sample is shown below.

25

Packaging and labeling

COLD ROLLED STEEL SHEET

Remarks on product use and handling precautions / Instructions for ordering

Remarks on product use and handling precautions

Product use Cold rolled steel sheets include a wide range of products with diverse properties. More economical manufacturing can be expected if the user fully understands these differences. JFE will propose the optimum product for the customers intended application. JFE can also provide advice on operational problems. Handling precautions In using cold rolled steel sheets, the following precautions should be taken in order to ensure optimum use: JFE products are normally coated with rust preventive oil with a degreasing property. However, products should be used promptly, as rust can occur if products are held for long periods after unpacking. Avoid exposure to water, including condensation, as this can cause rust even in case of oil-coated sheets. The strip edge is sharp and must be handled carefully using gloves to avoid injury.

Remarks on product use and handling precautions / Instructions for ordering

26

Instructions for ordering

When ordering, please include following information:
1 2 3 Classication of standard / Dimension / Quantity / Delivery date Application or part name Type of processing (In case of press forming, please show the part shape in detail) Unit mass and packaging : Maximum and minimum coil mass / Maximum coil outer diameter /Inner diameter / Acceptability of welded portion in coil Sheets : Maximum lot mass
Coils

Other requirements :Surface nish, edge form, strip shape, oiling, etc.

COLD ROLLED STEEL SHEET

(Appendix) Extracts from Japanese Industrial Standard (JIS) (1)

JIS G 3141 (2002)
Table 1. Symbol of quality Symbol of quality SPCC SPCD SPCE Remarks Commercial quality Drawing quality Deep Drawing quality

Remark 1. When the steel sheet and coil of standard temper grade and as-annealed one in quality SPCC are requested by the purchaser to guarantee tensile test values, letter symbol T shall be suffixed to the symbol of quality, thus appears SPCCT.

JIS G 3141 (2002)

Table 2. Temper grade Temper grade As-annealed Standard temper grade 1/8 hard 1/4 hard 1/2 hard Full hard Symbol of temper grade A S 8 4 2 1

27

(Appendix) Extracts from Japanese Industrial Standard (JIS) (1)

COLD ROLLED STEEL SHEET

(Appendix) Extracts from Japanese Industrial Standard (JIS) (2)

JIS G 3141 (2002)

Table 3. Surface finish Surface finish Dull finish Bright finish Symbol of surface finish D B Remarks A matt nish produced with a roll roughened its surface mechanically or chemically A smooth nish produced with a roll nished its surface smoothly

Remarks : This table is not applicable to the steel sheet and coil as-annealed.

JIS G 3141 (2002)

(Appendix) Extracts from Japanese Industrial Standard (JIS) (2)

28

Table 4. Tensile strength, elongation and non-aging property Tensile strength N/mm2 Symbol of quality 0.25 or over SPCC SPCD SPCE ( 270 min.) 270 min. 270 min. Elongation % mm Tensile test piece

Discrimination according to nominal thickness

0.25 or over 0.40 or over 0.60 or over 1.0 or over 1.6 or over to and excl. to and excl. to and excl. to and excl. to and excl. 2.5 or over 0.40 0.60 1.0 1.6 2.5 ( 32 min.) 34 min. 36 min. ( 34 min.) 36 min. 38 min. ( 36 min.) 38 min. 40 min. ( 37 min.) 39 min. 41 min. ( 38 min.) 40 min. 42 min. ( 39 min.) 41 min. 43 min. No. 5, in rolling direction

Remarks 1. The tensile test value, as a rule, is not applicable to SPCC. When specied (SPCCT) by purchaser, however, the values in parentheses shall be applied. 2. For those less than 0.60mm in thickness, as a rule, the tensile test shall be omitted. 3. This table is applicable to those of 30 mm or over in width.

COLD ROLLED STEEL SHEET

JIS G 3141 (2002)

Table 5. Hardness Temper grade 1/8 hard 1/4 hard 1/2 hard Full hard Symbol of temper grade 8 4 2 1 Hardness HRB 50 to 71 65 to 80 74 to 89 85 min. HV 95 to 130 115 to 150 135 to 185 170 min.

Remarks : As to hardness, either HRB or HV shall be applied.

JIS G 3141 (2002)

Table 6. Bendability Temper grade As-annealed Standard temper grade 1/8 hard 1/4 hard 1/2 hard Full hard Symbol of temper grade A S 8 4 2 1 Bend test

180 180 180 180 180

Flat on itself Flat on itself Flat on itself Thickness 0.5 Thickness 1.0

No. 3 test piece, in the rolling direction

Remarks : The bend test may be omitted for the steel sheet and coil of as-annealed and of standard temper grade.

29

(Appendix) Extracts from Japanese Industrial Standard (JIS) (2)

Bend angle

Inside Radius

Bend test piece

Cat.No.B1E-002-04

http://www.jfe-steel.co.jp/en/
TOKYO HEAD OFFICE Hibiya Kokusai Building, 2-3 Uchisaiwaicho 2-chome, Chiyodaku, Tokyo 100-0011, Japan Phone : (81)3-3597-3111 Fax : (81)3-3597-4860 JFE Steel America, Inc., New York Office 600 Third Avenue, 12th Floor, New York, NY 10016, U.S.A. Phone : (1)212-310-9320 Fax : (1)212-308-9292 JFE Steel America, Inc., Houston Office 10777 Westheimer, Suite 1010 Houston, TX 77042, U.S.A. Phone : (1)713-532-0052 Fax : (1)713-532-0062 JFE Steel Australia Resources Pty Ltd. Level 19, CPA Centre, 307 Queen St, Brisbane, QLD 4001, Australia Phone : (61)7-3229-3855 Fax : (61)7-3229-4377 JFE Steel do Brasil LTDA, Rio de Janeiro Office Praia de Botafogo, 228 Setor B, Salas 508 & 509, Botafogo, CEP 22359-900, Rio de Janeiro-RJ, Brazil Phone : (55)21-2553-1132 Fax : (55)21-2553-3430 JFE Steel Europe Limited 15th Floor, The Broadgate Tower, 20 Primrose Street, London EC2A 2EW, U.K. Phone : (44)20-7426-0166 Fax : (44)20-7247-0168 JFE Steel India Private Limited 1101, 11th Floor, Unitechs Signature Tower, Tower-A, South City-I, NH-8, Gurgaon, Haryana, 122002, India Phone : (91)124-426-4981 Fax : (91)124-426-4982 JFE Steel Asia Pte. Ltd. 16 Raffles Quay, No. 15-03, Hong Leong Building, 048581, Singapore Phone : (65)6220-1174 Fax : (65)6224-8357 JFE Steel Corporation, Bangkok Office 22nd Floor, Abdulrahim Place 990, Rama IV Road, Bangkok 10500, Thailand Phone : (66)2-636-1886 Fax : (66)2-636-1891 JFE Steel Corporation, Jakarta Office 16th Floor Summitmas II, JL Jendral Sudirman Kav. 61-62, Jakarta 12190, Indonesia Phone : (62)21-522-6405 Fax : (62)21-522-6408 JFE Steel Corporation, Manila Office 23rd Floor 6788 Ayala Avenue, Oledan Square, Makati City, Metro Manila, Philippines Phone : (63)2-886-7432 Fax : (63)2-886-7315 JFE Steel Korea Corporation 6th Floor. Geumgang-Tower. 889-13, Daechi-dong, Gangnam-gu, Seoul, 135-570, Korea Phone : (82)2-3468-4130 Fax : (82)2-3468-4137 JFE Steel Corporation Beijing 1720 Beijing Fortune Building No.5, Dongsanhuan North Road, Chaoyang District, Beijing, 100004, P.R.China Phone : (86)10-6590-9051 Fax : (86)10-6590-9056 JFE Consulting (Shanghai) Co., Ltd. Room 801, Building A, Far East International Plaza, 319 Xianxia Road, Shanghai 200051, P.R.China Phone : (86)21-6235-1345 Fax : (86)21-6235-1346 JFE Consulting (Guangzhou) Co., Ltd. Room 3901, Citic Plaza, 233 Tian He North Road, Guangzhou 510613, P.R.China Phone : (86)20-3891-2467 Fax : (86)20-3891-2469

NEW YORK OFFICE

HOUSTON OFFICE

BRISBANE OFFICE

RIO DE JANEIRO OFFICE

LONDON OFFICE

NEW DELHI OFFICE

SINGAPORE OFFICE

BANGKOK OFFICE

JAKARTA OFFICE

MANILA OFFICE

SEOUL OFFICE

BEIJING OFFICE

SHANGHAI OFFICE

GUANGZHOU OFFICE

Notice

While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the readers risk and no warranty is implied or expressed by JFE Steel Corporation with respect to the use of information contained herein. The information in this publication is subject to change or modification without notice. Please contact the JFE Steel office for the latest information.
1103R(0703) JTR Printed in Japan