Third national Conference on

Materials Sciences And Engineering,

(MSE’25)
June 11-12, 2025 in Chlef, Algeria
Organized by
Mechanics and Energetics Laboratory (LME)
Faculty of Technology,
Hassiba Benbouali University, Chlef

TECHNICAL PROGRAM
Wednesday, June 11th, 2025 | Face-to-Face Conference Day
Welcoming Participants at Auditorium Hall 2000
08:00 – 09:00
of the Hassiba Benbouali University, ElHassania, Chlef
09:00 – 09:30 Conference Opening Ceremony Lecture Hall B
First Plenary
Chemical Engineering of Polymers
09:30 – 10:00 Pr. Kamel CHAOUI (Univ- Annaba) Lecture Hall B
Session Chairs: Pr. HOUCINE Abdelkader, Pr FALLAH Mamoun,
Pr. GUEDRI Abdel elmoumene, and Mr. BELGHIT Salim
Second Plenary
L’apport de la métrologie pour les laboratoires de contrôle qualité des
matériaux de construction Lecture Hall B
10:10 – 10:45
Monsieur le Directeur DJEBRA Houcine (IRMA GLOBAL)
Session Chairs : Pr. HOUCINE Abdelkader, Pr FALLAH Mamoune,
Pr. GUEDRI Abdel elmoumene, and Mr. BELGHIT Salim
Coffee Break
Poster Session 1
10:45 – 11:30 Poster Session Chairs: Pr. BOUHEKA Ahmed (UEW Tissemsilt), Hall 2000
Dr. ZEGGAI Oussama, Dr. Hadj Mouloudj, Dr. BENICHOU Boucif,
Dr. MOKADEM Azzedine (ENP Oran), Dr. Rachid Traiche
Materials and environment Lecture Hall A
11:30 – 13:00 Oral Session 1 Renewal Energy and Electrical Engineering Lecture Hall B
Mechanical Engineering Lecture Hall C
Nano Science Lecture Hall D
Chemistry Lecture Hall E
13:00 – 13:45 Lunch
Poster Session 2
13:45 – 14:30 Session Chairs: Pr. Khaled MILOUDI, Dr. Abdessoufi BENHAMOU, Hall 2000
Dr. AMARA Mouna, Dr. Mohamed HAENTABLI, Dr. Khadidja AYADI,
Dr. Fatima GUITARNI
Materials and environment Lecture Hall A
14:30 – 16:15 Oral Session 2 Renewal Energy and Electrical Engineering Lecture Hall B
Mechanical Engineering Lecture Hall C
Nano Science Lecture Hall D
Nano Science Lecture Hall E
Coffee Break
Poster Session 3
16:15 – 17 :00 Session Chairs: Dr. Mouna AMARA, Dr. Mohamed DEKKICHE, Hall 2000
Dr. SAMEUT BOUHAIK Izzeddine, Dr. Mohammed SAADOU,
Dr. Fatima GUITARNI
 Wednesday, June 11th, 2025 | Online Conference Day
Nano Materials Room 1
Materials and environment Room 2
Renewal Energy Room 3
Oral
10:00– 16:15 Chemistry Room 4
Session 2
Engineering Room 5
Mechanical and Civil Engineering Room 6
Metallurgical and materials engineering Room 7
Nano Science Room 8
Applied Ceramic Technology Room 9

Thursday, June 12th, 2025 | Face-to-Face Conference Day

Welcoming Participants at Auditorium Hall 2000
08:00 – 09:00
of the Hassiba Benbouali University, ElHassania, Chlef
Poster Session 4
Session Chairs:
09:00 – 09:45 Dr. Houari KHOUIDMI, Dr. Sid ahmed BENZOUAOUI, Boubaker Hall 2000
BESSADIK, Dr. Boulanoir SAADAT, Dr. Houari AOUED, Dr.
First Plenary
La Trasition Energitique 2030
10:00 – 10:25 Pr. Larbi LOUKARFI (Univ- chlef) Lecture Hall B
Session Chairs: Pr. Rabia KHALIF and Pr, Maamar Djilali BAYEDA
Second Plenary
Intelligence Artificelle et la Securité Industrielle
10:30 – 11:55 Pr. Youcef ZANNIR Lecture Hall B
Session Chairs : Pr. Rabah KHENATA, Pr. Abdelhalim ALLOUI, and
Mr. Salim BELGHIT
Coffee Break
Poster Session 5
11:00 – 11:45 Session Chairs: Pr. ZIDANE Ibrahim, Pr. LARBI Ahmed Amine, Hall 2000
Dr. Abdessoufi BENHAMOU, Dr. Youcef KAMLA, Dr. BELKACEM
Nefissa, Dr. FOUKRACH Mohammed and Dr. BOUAKKAZ Ahmed
Ouadah
Panel
11:50 – 12:30 University/Industry Echange Panel Lecture Hall B
12 :30 – 13 :00 Conference Closing Ceremony Lecture Hall B

2
 DETAILED PROGRAM
MSE’25, June 11-12th, 2025
10:45 – 11:20 Poster Session 1 | Wednesday, June 11th, 2025
Hall 2000 | Nano-Sciences
ID 571 Synthèse écologique et caractérisation de nanoparticules de TiO₂
Achour Achouak, Necira Zelikha, Bouhenna Abdessalem
ID 1505 L’analyse des vibrations libres des poutres composites renforcées FG-CNT par la théorie de la
déformation par cisaillement du premier ordre (FSDT)
Asmaa Djilali Bouzina, El Hadj Meziane, Riad Bennai, Sarra Sendjasni
Structural and optical properties of highly textured thin films of undoped and Ag-doped ZnO
ID 958
herzi Abdelkarim, Ouadha Ismail
Chemical composition and electronic properties of undoped and Cu doped TiO2
ID 1253
bedrouni mahmoud, Abdelkrim Mahfoud, Halati Mohamed Salah
ID 708 Graphene patch antenna for Ku band satellite application
sana dahou, soumaya larouci, khaoula toudert, Amine rabah
ID 470 Half-Metallica ferrimagnetic of novel Ti2-based ternary Heusler alloys: DFT calculations.
drief mohammed, Guermit youcef, hocine kamel
ID 414 Evaluation of physical and structural properties of Ti-25Nb-25Zn alloy obtained by powder
metallurgy for use as biomaterial
fouzia hamadi, mamoun fellah, dikra bouras
ID 1780 Low dimensional behavior of normal and anomalous densities for
homogeneous Bose gases at finite temperature
Mehedi atika
ID 1808
Simulation and characterization of dual layer ITO/ZnO/P3HTPC61BM/MAPbI3/MASnI3/Spiro-
OMETAD/perovskite solar cells by using TCAD – SILVACO
Bourahla Nassima
ID 1833 Effects of the Geometric Parameters on the Interfacial
Stresses Bone/Implant
Yamina CHELAHI CHIKR
ID 1023 Mechanical behavior of porous functionally graded plates
SAFA Abdelkader, HADJI Lazreg, CHAMI Guermit Mohamed Bilal
Modeling Left-Turn Movements at Signalized Intersections with Shared Lanes: A Case Study
ID 1525 from Oran, Algeria
wissem BELKHEIR, wafa TEBBOUNE, Ahmed BOUMEDIENE
ID 1441 Comparative Study of the Magnetic and Structural Properties of Nanostructured iron-nickel
and iron Tin Alloys Synthesized via mechanical alloying
Abderahim ABADA, Abderrahmane YOUNES, Rachid AMRAOUI
ID 1437 Role of Cobalt in Improving the Magnetic Behavior of Mechanically Milled Iron-Alumina
Nanocomposites.
Rachid AMRAOUI, Abderrahmane YOUNES, Djilali ALLOU, Abderahim ABADA
ID 1733 Étude numérique de l'amélioration du transfert de chaleur dans une marche descendante à
l'aide de nanofluides et d'une ailette flexible.
KHELIF Fatima zohra
Étude de l’influence de l’ajout de rangées de boulons sur la distribution des contraintes de Von
Mises dans les assemblages par platine d’about
ID 1232
Hichem Rakib SEBBAGH, Abdessamade MENDLI, Sid Ahmed BEKHTI, Anis ABIDELAH,
Abdelhamid BOUCHAIR
3
ID 1292 Mesoporous nanocomposite CuO/MCM-41: Synthesis, and Structural Characterization
ahlam belabed, hamza Medjadji, Mohammed sadou, Nassima Salhi
ID 1414 Structural, Optical and Electrical properties of NiO and Cu-doped NiO thin films synthesized
by spray pyrolysis
Yousra Boussida
La désalinisation et l’amélioration de la résistance de compression du sol de la sebkha d’Oran
ID 1577 par le traitement électrocinétique
HADJADJ FATIMA ZOHRA, LAREDJ NADIA, MISSOUM HANIFI
Identification des sources de déformation des assemblages de type couvre joint
ID 1239 Abdessamade MENDLI, Hichem Rakib Sebbagh, Sid Ahmed Bekhti, Anis Abidelah, Abdelhamid
Bouchair
A DFT-Based Insight into the Physical Properties of Lead-Free Double Halide Perovskite:
ID 635 Toward Eco-Friendly Optoelectronic Innovation
Ahmed Azzouz-rached, Ismail OUADHA
Optoelectronics: The Rise of a New Layered Semiconductor for Next-Gen Applications
ID 634
Ahmed Azzouz-rached, Ismail Ouadha
ID 1076 Nano-TiO2 layer /ZnO Heterojunction supported raw diatomite and modified by phosphoric
acid based on a Solvothermal process
cherrak rachida, sekkal kawtar, zerrouki nawel, seghier abdelkrim, hadjel mohammed,
benderdouche noureddine
ID 1339 Sustainable Nano Alumina Production from Aluminum Waste: A Dual-solution for Recycling
and Resource Scarcity
Houssem Eddine RAMREME, Anis DJILANI, Mohamed AIT AHMED, Mohamed Anis
BOUTAOUI, Abdessabour BENAMOR, Mohamed HADJI, Maamar HAKEM
ID 1344 Nano Alumina extracted from Kaolinite vs. Exfoliated Kaolinite: Unlocking the Potential of
Al2O3-Rich Clays
Anis DJILANI, Houssem Eddine RAMREME, Mohamed AIT AHMED, Mohamed Anis
BOUTAOUI, Abdessabour BENAMOR, Mohamed HADJI, Maamar HAKEM
ID 1139 Numerical Modeling of a Coupled Structure–Actuator System Based on Piezoelectric Elements
Somia Lemoussi, Adel Zemirline, Mohammed Ouali
ID 1327 Structural Characterization of ZnO: Ni thin films prepared by sol-gel dip-coating technique
BELKASSA MISSOUM, LARBAH Youssef, GHALEB ABDELLATIF, HAMRI YAZID ZAKARIA,
HERZI Abdelkarim, ADNANE Mohamed, MESBAH HASSEN
ID 1084 Eco-friendly development of mesoporous-supported copper nanoparticles using coffee extract
Kawter Nor El Houda SEKKAL, Rachida CHERRAK, Rachida OUARGLI-SAKER
ID 1027 Maghnite-H+ un nouveau catalyseur vert pour la synthèse de nanocomposites
Smail Boutaleb, Hodhaifa Derdar
ID 1436 Structural and Magnetic behavior of Ni3Fe/ NiFe₂ O₄ Nanocomposites Synthesized via
Mechanical Milling process
Abderrahmane Younes, Rachid Amraoui, Abderahim Abada
Contribution de l’échangeur air-sol (EAHE) à l’amélioration de la performance énergétique des
ID 1202 bâtiments dans différents contextes climatiques algériens
MAADEN Hafsa, Menhoudj sayeh, MOKHTARI abderrahmane Mejedoub
ID 1061 Effects of SIMS primary ion beam energy on HBT Ge depth profiles
aymen allele, Fayçal Boulsina, Maya Lakhdara
ID 885 Hydroxyapatite Nanocomposites: Properties and Practical Applications
sara safa
ID 553 Development of High-Performance Layered Na1.1MnO2 Oxides via Niobium Doping for
Advanced Sodium-Ion Batteries Applications.
Abdelali Benzaid, Rawdah Whba, Nedjemeddine Bounar, Abdelmalek Saoudel, Serdar Altin
Experimental study and pre-treatment of the leachate
ID 1203
Zohra bounouara
ID 572 Synthesis of nanocomposites: effect of the interface on the performance of the material
habiba tabet
ID 1597 Étude ab initio des propriétés structurales, électroniques et optiques des alliages Alₓ Ga₁ ₋ ₓ As
4
 Kheira CHEBBAH, Fatiha Besahraoui
ID 1555 Effect of mechanochemical surface modification of calcined kaolin with urea-stearic acid co-
system on PVC/calcined kaolin compatibility: Improved properties of rigid PVC
nanocomposites.
Oum Keltoum MALLEM, Fatma Zohra Benabid, Foued Zouai, Oussama Yahi
ID 564 Synthesis, structural and magnetic properties of CoxFe100-x thin films deposited onto Si (111)
substrate
Ahlem MELLOUL, Ahmed KHARMOUCHE
ID 463 Calcul numérique des courbes de dispersion de phonons des structures de nano-alliage de
surface ordonnées Au3Pd, AuPd et AuPd3
Bilal Menguelti
ID 530 Synthesis and application of ZnO material
Hassiba MESSAOUDI
ID 1744 Preparation of a cream based on Opuntia ficus-indica gel, zinc nanoparticles, and essential oils
Mohamed Redha Itatahine, Djallal Mahiaddine, Fatima Zohra Kermezli, Fouzia Ouadah
Bensalah
ID 1031 Synthèse par la méthode sol-gel et caractérisation de nanophosphores phosphovanadates
activés par le terbium
AHLAME MRAOUEFEL, LAKHDAR GUERBOUS, MADJID DIAF
ID 1651 Propriétés des films minces d'oxyde de baryum pulvérisé au lithium Effets du dopage
Nassima HAMZAOUI, Mostefa Ghamnia
ID 1730 Molten Salt Shielded Synthesis of the Ternary Nanolayered Cr2AlB2 MAB phase
Anis Mohamed Boutaoui, Mohamed Ait Ahmed, Anis Djilani, Houssem Eddine Ramreme,
Nabil Chiker, Abdessabour Benamor
ID 1738 Formulation development of deodorant cream from Aloe vera gel, zinc oxide nanoparticles
and essential oils.
Chemseddine SENDJASNI, Maamar KOUIDRI ZOURGUI, Fatima Zohra KERMEZLI, Fouzia
OUADAH BENSALAH
ID 1741 Structural and NLO Properties of FBID1: A Combined Experimental and Theoretical Study
khadidja soltane, naima Boubegra, khayra hammou, Mohammed Hadj Mortada Belhachemi,
abdelkader Chouaih
ID 567 Different techniques for manufacturing composite coatings with incorporation of nanoparticles
by the electrodeposition method
ABDESSELAM YASSINE
ID 552 Study of a mechanical mill with connecting rod and crank system for mechanical alloying
ZIDANE Djilali
ID 446 Microstructure characterization, phase evolution and mechanical properties of nanostryctured
FeAlV
Zineb Hamlati, Hanane Mechri, Hacene Hachache
Improvement of 400 kV Power Line Transmission Capacity Using a FACTS System
ID 677
Boukarana leila, Yassina Medghaghet
ID 644 The structural and physical properties of platinum-based half-Heusler alloys PtTiM (M=Ge, Si,
Sn) using density functional theory (DFT).
Benallal Mohamed
ID 541 illustrations of the post-gaussian approximation a binary mixture of BEC
koudjil fatima, Benarous Mohemad
ID 749 Investegation on physical properties of new Silicon Telluride compounds from First-Principles
Calculations.
Krarcha Hadda
ID 872 Theoretical Investigation of Nonlinear Optical Properties of Push-pull Organometallic
Molecules
Hicham MAHDJOUB-ARAIBI, Mourad ZOUAOUI-RABAH, Abdelkader M ELHORRI, Madani
HEDIDI
ID 1477 Electronic, elastic and thermoelectric properties of quarternaire Heusler compound ScTaMnIn .
Miloudi Mohamed Esseddik
5
ID 548 Advanced computer simulations of double perovskites Rb2ScInX6 (X= Br, Cl): Predicting
physical properties via DFT theory
Youssef Seksak, Abderrahman Khalifa, Amel Merrad, Rabah Moussa
ID 1037 Enhancing Hydrogen Storage Efficiency with Charged Fullerenes: A Simulation Study
ABID BOUDIAR, Habbala Bendifallah
ID 1725 Theoretical study on the physical properties of Ti2Co (Al, Ga)
Ahmed TAHRI
ID 814 Magnetic and structural properties of half-metallic ferromagnets Co2Mn0.5Pr0.5Si.
Ahmed Benidris, Siham Amari
ID 1105 Modelling and Simulation of Aerosol Particle Coalescence Using Monte Carlo Probabilistic
Methods.
Mohammed Fawzi AMARA, Joanna DIB, Djilali AMEUR
ID 486 Temperature sensing of double-well qubit in biwire ultracold polar molecules.
Asma Tahar Taiba
ID 1312 Numerical Optimization of CuBi2O4-Based Kusachiite Solar Cells with ZnO Electron and NiO
Hole Transport Layers: Insights from SCAPS-1D Simulations
Mousaab Belarbi, Oussama Zeggai, Mohamed El Amine Boukli Hacene, Abdessalem Bouhenna,
Hadj Mouloudj
ID 1277 Effect of halogenation of polycyclic aromatic hydrocarbons on theirs electronic properties and
chemical reactivity: DFT study
Amina Benalia, Abdelali Boukaoud, Rachid Amrani
ID 1092 Structural, Elastic, Mechanical, Thermodynamic, Electronic, and Magnetic Properties of
Ni2MnZ (Z = As, Pb) Full-Heusler Alloys: DFT Calculation
Boucif Benichou, Halima Bouchenafa, Amel Merrad, Zakia Nabi, Badra Bouabdallah
ID 1429 Numerical Simulation Studies of Structural, Electronic, and Magnetic Characteristics of the Full-
Heusler Compounds Sc2CrZ (Z = Ge, As)
Azeddine Cherigui, Boucif Benichou, Halima Bouchenafa, Amel Merrad, Zakia Nabi, Badra
Bouabdallah, Samia Radjel
ID 1435 First-Principles Insight on Electronic Structure, Mechanical Stability, and Magnetic Features of
Ternary Full-Heusler Alloys Ni2MnZ (Z = Ga, Ge)
Samia Radjel, Boucif Benichou, Halima Bouchenafa, Amel Merrad, Badra Bouabdallah, Zakia
Nabi, Azeddine Cherigui
ID 1756 Theoretical analysis of mechanism and regio- and stereoselectivityof 1, 3-dipolar cycloaddition
of cyclic nitrone and substituted alkenesby DFT method
samir Bouacha, chenna Malika
ID 1618 Kinetic modeling of H₂ O adsorption on TiO₂ surfaces: insights into hydroxyl group dynamics
and oxygen vacancy dependence
Fatima Bouzidi, Ahmed Bouhekka, Abderrezak Berbri
ID 1229 Design, molecular characterization, and DFT investigation of a thiazolobenzimidazole-based
organic semiconductor for photovoltaic applications
Ahmed Djafri, Rachida Rahmani, Nadia Taibi, Narimane Kheddam, A. Bouchama, A. Chouaih
ID 950 Optical Properties of Materials: A Theoretical Approach
Hanane Djouama, Rabie Djouama, Malika Nouadji
ID 1737 Lensing in matched interior and exterior Schwarzschild–de Sitter spacetimes
Mourad Guenouche
ID 1284 Electronic and Magnetic Behavior of ZnFeSnO₄ Double Spinel
Asma Hachilif, Friha Khelfaoui, Tarek Djeldjeli, Hamza Saci, Aissa Benkatlane
ID 741 The effect of In, Cu Co-doping on the electronic structure and optical properties of ZnS. First
principal calculations
Hakima HEDJAR
ID 1068 Optimization of Parameters for the Von Weizsäcker formula for the Determination R.M.S
Hadj Mouloudj, Oussama Zeggai, Rachid Traiche
ID 1315 Structural, Elastic, and Thermoelectric property of Anti-perovskites Ag3SX (X =I, Br and Cl)
compounds
BERROUNA HENEN, AZZAZ YAHIA, ZAIR LATIFA, MEKHALEF BENHAFSA Leila
6
ID 1235 Simulation and Calibration of Heterogeneous Structures via Plasmonic Resonance and its
Applications in Cancer Detection
Abdellatif CHARAIF
ID 1237 The Kretschmann configuration induces surface plasmon resonance in nanostructured metal
films
Abdellatif CHARAIF
ID 1165 Breathers solutions of nonlinear hirota equation
Zeyneb TAIBI

11:30-13:00 Oral Session 1| wednesday, June 11th, 2025

Lecture Hall A | Materials and Environment
Oral Session Chairs: Pr. Ghania HANINI, Pr. TAHRAOUI DOUMA Naima, Dr. Malika OUAGUAD
Numerical Study on Improving Energy Efficiency of Bricks for Hot Climates: The Case of Msila
and the Influence of Material Types
ID 1679
Mahi Eddine Brahimi, Mustapha Maliki, Nadia Lared, Hanifi Missoum, Djihad Bennaceur, Kheira
Belhamideche
High-Performance of a Magnetic Nanocomposite loaded Agro-Industrial Pomace: “A Sustainable
ID 678 Solution for Tannery Effluent Treatment"
Ahlem Khelali, Fatiha Benmahdi
Comparative Analysis of Energy Optimization in Green Construction Using Insulated Materials
ID 483 in the Algerian South Sahara Region
Issam Aouari, Aicha Rouabeh, Baizid Benahmed
Effect of Potassium Permanganate-Treated Date Stone Flour as a Filler on the Elastic Properties
ID 1057 of Green Epoxy Resin
Nacera BENGHANEM, Nadia Aguerssif, Nouara Chibane
Adsorption and photocatalytic degradation study of new Ruddlesden-Popper doped oxide:
ID 511 Sr1.8M0.2FeO4 (M=La, Ce, Ni)
GUESSOUM Khadoudj, FOUDI Samira, RAMDANI Sonia
GaAsPN/GaAs QDs Structure For Solar Cell Applications
ID 376
fethi BENYETTOU, Abdelkader Aissat
ID 1821 EXTRACTION AND CHARACTERIZATION OF PHENOLIC COMPOUNDS FROM
ALGERIAN Wild FENNEL SEEDS
Karima Dahmani

7
 11:30-13:00 Oral Session 1| wednesday, June 11th, 2025
Lecture Hall B | Renewal Energy Electrical Engineering
Oral Session Chairs: Pr. Toufik TAHRI, Pr. M’hamed BARRIACHE, Dr. Mohamed BOUTABA
Caractérisation multiéchelle de l'isolation en PRC des câbles MT vieillis thermiquement : SEM,
ID 526 FTIR, comportement mécanique et diélectrique
Yasmina SEBBANE
Optoelectronic and Thermoelectric Optimization of Chalcogenide Perovskites via GGA-PBE and
ID 743 TB-mBJ
hamiche korichi, SEFIR YAMINA
Net Metering Framework for PV Integration in Smart Grids
ID 454
Abderrezzaq Ziane, Rachid Dabou, Abdelkrim Rouabhia, Ammar Necaibia
Operational assessment of Zaouiet Kounta 06 MW PV power plant under harsh desert
conditions
ID 1006
Chekal Affari Belhadj, Kahoul Nabil, Younes Mohammed, Kherici Zoubida, Cheghib Houcine,
Necaibia Ammar
Development and Characterization of an Indirect Solar Dryer Integrated with a PVT Collector
ID 502 for Drying Agri-food Products in Saharan Regions
ahmed amine larbi, ahmed mediani
Optimizing a Hybrid Renewable Energy System for Remote Mobile Network Connectivity in
ID 1146 Chlef, Algeria: A Techno-Economic Analysis Using HOMER Pro
Mohamed DEKKICHE, Toufik TAHRI

11:30-13:00 Oral Session 1| wednesday, June 11th, 2025

Lecture Hall C | Mechanical Engineering
Oral Session Chairs: Pr. KHELIL Ali, Pr. Mohamed BRAIKIA, Dr. Zakaria MADAOUI
Autonomous Shear Wall Distribution In Reinfoced Concrete Buildings Under Earthquake
ID 1130 Excitations
Nesreddine Djafar-Henni, Nassim Djedoui, Rachid Chebili, Akram Khelaifia, Salah Guettala
Impact de l’ajout d’un plancher collaborant sur la stabilité au flambement des poteaux d’un
ID 1230 hangar métallique réhabilité
ines addou, abdessamade mendli, Hichem Rakib Sebbagh, Sid Ahmed Bekhti, Anis Abidellah
Creep of UHPC based on dune sand from the western erg of Algeria containing silica fume or
ID 1770 metakaolin
Ahmed TAFRAOUI
MHD Investigation of Natural Convection of a Square Cavity Containing Four Rectangles Using
ID 1164 Nanofluid
Said Azzi
Influence de l’allongement du boulon sur le comportement d’un T-stub sous températures
élevées
ID 1078
DOUAH Yasmina, FEKIR Mohamed Mokhtar, SEBBAGH Hichem Rakib, ABIDELAH Anis,
BOUCHAIR Abdelhamid
Contribution d'un renfort par contre-plaque à la résistance monotone et cyclique des
ID 983 assemblages métalliques
Mohammed Mokhtar FEKIR, Yasmina DOUAH, Hichem Rakib SEBBAGH, Anis ABIDELAH

8
 11:30-13:00 Oral Session 1| wednesday, June 11th, 2025
Lecture Hall D | Nano-Sciences
Oral Session Chairs: Pr. BENTOUAF Ali (UTM Saïda), Dr. BOUHANI BENZIANE Hamida (UHB Chlef),
Dr. BERBRI Abderrezak (UHB Chlef)
ID 575 A DFT study of the Eco-friendly Ba-based chloro-perovskites Ba3MCl3 (M= P, As and Sb):
Structural , elastic, and optoelectronic properties for efficient energy harvesting applications
Hadjer BENDJILALI, Amina ARRAR, Habib ROZALE, Abbes CHAHED
ID 800 Localization of Quasiparticles in a Bose-Bose mixture in Disorder Potentials
zohra mehri, Abdelaali Boudjemaa
ID 1320 A DFT-Guided Study of Yttrium-Containing Quaternary Heusler Alloys for Sustainable Energy
Solutions
Abdelbasset Abdelli, Salem Hebri, Nour-eddine Benkhettou
ID 1294 Investigating Anisotropic Tunneling Magneto-Resistance in Antiferromagnetic Based Junction.
AISSAT DJAMEL, BAADJI NADJIB
ID 1200 First-Principles and EELS Based Analysis of Electronic and Optical Properties of Indium
Antimonide for Optoelectronics Applications
Fatiha Besahraoui, Kheira Chebbah, Hakima Hedjar, Lakhdar Boumia
ID 1641 Synthèse, caractérisation structurale et évaluation biologique du composé C₂ ₄ H₁ ₅ O₃ N₃ F₂ S
Narimane KHEDDAM, AHMED DJAFRI, ABDELGHANI BOUCHAMA, Nawel ZERROUKI,
Abdelkader CHOUAIH

11:30-13:00 Oral Session 1| wednesday, June 11th, 2025

Lecture Hall E | Chemistry
Oral Session Chairs: Pr. Miloudi Khaled, Pr. Laidani yekhlef and Dr. SARDI Amina
Effect of rotation speed on the microstructure features and micro-hardness of AZ31 Mg alloy
ID 1088 friction stir welds
Khawla AMARA, Walid BEDJAOUI, Riad BADJI, Mabrouk BOUABDALLAH
Experimental characterization of Portevin-Le Chatelier instabilities in the industrial Al-Mg alloy
ID 661 at room temperature
CHIBANE Nouara, BENGHANEM Nacera, AGUERSSIF Nadia
Improving fatigue performance of API X70 pipeline steel through microstructural optimization
ID 1625 via two heat treatments
daas ahmed, Khelifi halima, allaoui omar
Synthesis, Structural Study and Biological Evaluation of a New Hydrazone Derivative: 2-((2,4-
Dimethoxybenzylidene) hydrazono)-1,2-diphenylethanone – Experimental Approach and
ID 394
Molecular Modeling
Samia DJABBOUR, Nourdine BOUKABCHA
Methanol oxidation through the catalysis of an elaborated NiMn alloy
ID 1596
Hizia MERKOUNE
Enhancing Mechanical Properties of Plastic Mortars through Recycled Concrete Sand and
ID 1089 Mineral Additions
Imene Bouldoum, Boubekeur Toufik, Ezziane Karim
Proactive Measures for Long-Term Hydrocarbon Deposit Conservation: Implications of Water
Pumping from the Terminal Complex, El Oued, Algeria Case Study
ID 1453
Hafidha Khebizi, Bachir Benlaoukli, Said Gaci, Mohand Laid Idri, Youcef Mokrani, Nesrine
Belabad
ID 1836 To reduce organic pollutants, prepare the nanoparticles, polyethylene glycol
nanocomposites, and organophilic clay.
Amina Sardi a,b,c, Soumia Abdelkrim j,h ,Khadidja Kradra Brahmab,f,j, Souad Bennabi a,c

9
13:45 – 14:30 Poster Session 2 | Wednesday, June 11th, 2025
Hall 2000 | Chemistry
Modeling and Simulation of the Mechanical Integrity of Orthopedic Implants Based on
ID 466 Biodegradable Magnesium Alloys
sadouki bellal, AZZOUG Rabah, Chitroub Mouhamed, BENHEBAL Hadj, BENRABAH Bedhiaf
Etude de Premiers Principes du LaC2
ID 479
mebarki djalel
Microstructural and Mechanical Characterization of SiC-Reinforced Zn-Al-Cu Alloy
ID 509
Djamel ABDELKEBIR
Mitigating the negative effects of boring surface treatment by supplementary heat treatment
ID 1584
halima khelifi
Effects of yield deformation (Re) on the corrosion of 25CD4 steel in 3.5% NaCl
ID 1504
Djilali ALLOU, Rachid AMRAOUI, Manel BENMOHAMED, Youcef FACI
The Impact of Coupling Medium Permittivity on Wave Penetrationin Microwave Breast
ID 925 Imaging
ZAFER Amina, CHOUITI Sidi Mohammed, MERIAH Sidi Mohammed
ID 1840 Molecular Structure Characterization of Asphaltenes Using XRD
Khadidja Kradra Brahma
Temperature effect on the modal frequencies of aluminum honeycomb plate
ID 1503
Redha AMRI
Effet de post-traitement sur les propriétés physiques et mécaniques des composes
ID 543 intermétalliques des couches de galvanisation
Younès Benarioua
Toward sustainable crack repair: Elastoplastic study of hybrid techniques for Aluminum
structures
ID 926
Wahiba Nesrine BOUZITOUNA, Wahid OUDAD, Noureddine DJEBBAR, Mohamed
BELHAMIANI
Etude des Propriétés structurales, électroniques et magnétiques du heusler ternaire GdRuSb
ID 1586
Yamina GHLEM, Nabila Mehtougui
Finite Element Simulation of Tensile Shear Behavior in Resistance Spot Welded Overlapped
ID 1576 Joints
Ismail Benchadli, Mustapha Benachour, Fethi Sebaa, Nadjia Benachour
Computational insights into the structural, mechanical, electronic and magnetic properties of
GdAlO3 semiconductor in cubic-perovskite using FP-LAPW method
ID 1036
Aboubakr Esseddik KOURDACI, Khaled Ibn El Walid BENBRAHIM, Boualem ABIDRI, Djamel
RACHED
Injectable Biomaterials for the Non-Surgical Stabilization of Osteonecrotic Bone
ID 909
Amel LAIDI, Mohammed AMMAR
Formulation, application, and physicochemical characterization of epoxy coatings with
ID 1220 conductive polymers for corrosion resistance in a 3.5% sodium chloride acidic environment.
Nacer Mounir, Choayb Bouhafs, Hamid YOUSFI
Compact Frequency-Reconfigurable Patch Antenna: Impact of Substrate Materials on
ID 794 Performance
FROUDA Nour El Houda, BERKAT Abdellatif, AZZAZ RAHMANI Salima
Ab Initio Analysis of RbNbCd and RbNbZn Half-Heusler Compounds as Promising Candidates
ID 974 for Thermoelectric Applications
Ismail OUADHA, Ahmed Azzouz Rached, Noureddine Bouteldja, Abdelkarim Herzi
Theoretical Analysis of YXO3 (X=Ti & Fe) Orthorhombic Perovskites for High-Energy Devices
ID 976
Ismail OUADHA
Impact of weak magnetic field and temperature on the corrosion of aluminum AL/XLPE
ID 610 0.6/1KV
Mohammed Mounir BOUROUIS, Rabeh SLIMANI, Sahnoun ZENGAH, Ismail DRAI
10
 A contribution study of rocks samples from Khangat Sidi Nadji Biskra
ID 747
RABIAA BENESSEDDIK, abderrahim achouri, aziez zeddouri, meriem touil
The concentration effect of extended BSA protein adsorption at solid surface
ID 1375
TADJINE MOUSTAFA, Bouzidi Fatima, Berbri Abderrezak, Bouhekka Ahmed
The evaluation of phosphate rock quality from Algerian deposits and its suitability for
ID 1648 phosphoric acid and fertilizer production represents a matter of critical regional importance
ameur amara
Advanced Thermo-Chemical Purification Of Taibet Sand for High-Purity Sand Production
ID 756
TOUIL Meriem, ACHOURI Abderrahim, MEFTAH Nassima, BENESSEDDIK Rabiaa
Welding parameters effects on static and fatigue behavior of dissimilar Steel/Al-alloy joints:
Review and Synthesis
ID 1134
Mustapha BENACHOUR, Nadjia BENACHOUR, Abdelkader BENYOUCEF, Fatima Zohra
SERIARI
The impact of the macroscopic - scale polarization on the piezoelectric characteristics of poly
ID 1682 (vinylidene fluoride) (PVDF)
SOUHA DEBILI, ALI GASMI
Experimental Analysis of the Resistance of Sanitary Product Enamels to Fish Scale Defects
ID 1463
Adel HADJ AMAR
Advanced microstructural characterization of WC composites repaired with TIG
ID 1459
Malek HEBIB, Bouzid MAAMACHE, Brahim BELKESSA, Billel Cheniti
COMPUTATIONAL OF ELECTRONIC BAND STRUCTURE AND ELECTRONIC CHARGE
ID 1102 DENSITY FOR THE TERNARY ALLOY
Hadjer Saheb
Theoretical Analysis of YXO3 (X=Ti & Fe) Orthorhombic Perovskites for High-Energy Devices
ID 978
ismail OUADHA, Ahmed AZOUZ RACHED, Noureddine BOUTELDJA, Abdelkarim HERZI
Influence of Rotational Speed on Temperature Distribution and Joint Quality in Rotary Friction
ID 1533 Welding of Dissimilar Stainless Steels"
Mekahal Abdelhamid
Etude ab-initio de la stabilité mécanique d’un matériau ferromagnétique full heusler
ID 1129
FARES Zineb
Synthesis, Characterization, and Anti-Hemorrhagic Activity of Silver-Ketoprofen Complexes
ID 1147
Kamel MOKHNACHE
DFT-Based Insights into the Antioxidant Activity of Flavonoid-Metal Complexes
ID 656
MEDIGUE Nor El Houda, FEDDAL Samira, BECHOHRA Lina Linda, KELLOU-TAIRI Safia
Selenium-Based Hybrid Crystalline Materials: Synthesis, Structural Elucidation, and Quantum
ID 1579 Chemical Analysis
Sonia Baaziz
Advancing Green Chemistry: Eco-Catalyzed Synthesis of N-vinylcarbazole-Based Copolymers
ID 1015 Using Clay Materials
Bouchra AIT SIDHOUM, Mohammed Chakib BAGHDADLI, Rachid MEGHABAR
Integrated Computational and Experimental Analysis of a Thiourea-Based Single Crystal:
ID 524 Structural and Electronic Characterization
Nour Eddine BENHARKAT
Green Synthesis and Antioxidant Evaluation of Selenium Nanoparticles Using Cocoa Bean Shell
ID 1058 Extract
Bouamama assia, reguieg fatiha, marina ramos
Synthesis, Characterization, and Evaluation of the Antibacterial and Enzymatic Potential of
ID 1750 Benzimidazole Compounds: An In Vitro and In Silico Study
DJAAFER-MOUSSA RAZIQA, Leila DJAHNIT, Chrif GUIASSA, Lakhemici KABOUB
Synthesis, Crystal Structure, Electronic Properties, and Molecular Docking Study of [5-Imino-7-
ID 393 phenyl-5H-thiazolo[3,2-a] pyrimidine-6-carbonitrile]
Samia DJABBOUR, Nourdine BOUKABCHA
Génération d’un pharmacophore commun à une série de dérivés de la Curcumine
ID 1211
Samira FEDDAL, Nor El Houda MEDIGUE, Safia KELLOU-TAIRI
ID 1499 Green Synthesis of Silver Nanoparticles Using Clove Extract for the Removal of a Cationic Dye
11
 CHIKH Hadjer, Cherifi zakaria, Derdar hodhaifa, Rachid Meghabar, Chebout redouane,
Bachari khaldoun
Sustainable Treatment of Industrial Dye Effluents via Fenton and Photo-Fenton Advanced
ID 1085 Oxidation Processes
khoussa hanaa, TOUAA Nesrine, BENABBOU khalil
DFT-Based Molecular Modeling, ADMET Prediction, and Molecular Docking Studies of
ID 1353 Transition Metal Complexes of Ortho-Phenylenediamine and Its Substituted Derivatives
Noura KICHOU, Manel TAFERGUENNIT, Nabila Ghechtouli
Theoretical Investigation of DMACB via DFT and Hirshfeld Surface Analysis: Insights into
ID 1479 Molecular Interactions and Optical Potential
Naima BOUBEGRA
Leveraging Aspen Plus for the Simulation of Continuous Pharmaceutical Manufacturing: A Case
ID 1484 Study on Ibuprofen
Malika Ouagued, Halima Maameri, Lamia Seddik
Simulation-Based Comparison of Ethyl Acetate Production via Reactive Distillation and
ID 1497 Conventional Process Using Aspen HYSYS
Malika Ouagued, Khouloud Keddar, Selsabil Attafi, Loubna Hammadi
Experimental and morphological studies of an expired antibiotic drug as a green corrosion
ID 846 inhibitor for brass in nitric acid solution.
Sofiane Sebiane, Farida Kellou-Kerkouche, Brahim Idir
Synthesis and Structural Analysis of poly(N-vinylcarbazole-co-Isobutyl Vinyl Ether) via Clay-
ID 1017 Catalyzed Cationic Copolymerization
Bouchra AIT SIDHOUM, Mohammed Chakib BAGHDADLI, Rachid MEGHABAR
Valorization of a medicinal plant, Artemisia herba -alba asso, from the Djelfa region (Algeria),
ID 1566 through Phytochemical screening
MAMMERI Bakhtia, KOUIDRI Mohamed
Valorization of medicinal plant, Artemisia herba -alba asso, from the Djelfa region (Algeria),
ID 1575 through Phytochemical screening.
MAMMERI Bakhtia, KOUIDRI Mohamed
Synthesis, Characterization, and Theoretical Study of a Zinc(II) Complex: Crystallographic
ID 1300 Analysis, NLO Properties, and Molecular Docking Study
Abdelghani Bouchama, Ahmed Djafri, Nadia Taibi, Narimane Kheddam
Valorisation du chitosane dans le traitement du rouge Trisacrylamide : conception d'hydrogels
ID 599 composites efficaces.
Nihel DIB, Houari SEBTI, Fatima Zohra SEBBA, Boumediene BOUNACEUR
Regeneration of ‘Mobile DTE 10 Excel 32’ used lubricating oil by acid treatment
ID 1502
guendouz samira
Biosynthesis of Silver Nanoparticles Using Moringa: A Green Approach for Novel Applications
ID 996 CHIKH Hadjer, Cherifi zakaria, Derdar hodhaifa, Rachid Meghabar, Chebout redouane,
Bachari khaldoun
Amino Acid Profile Study of Faba Bean (Vicia faba L.): A Chemical Approach for Nutritional
ID 461 Valorization
Nacera HEDIA, malika meziane ahmed, khedidja boudour
Thermal and Chemical Properties of ABS/15% PMMA Bilayer Polymer Sheet
ID 1247
ABDELWAHAB KHLEDJ
Antioxidant Comparison between Essential Oil, Ethanol and Water Extracts of Moringa
oleifera Leaves
ID 528
fatiha arioui, safia ali haimoud, amina delmi bouras, zohra Boukefoussa, salima boudane,
manel allem
ÉVALUATION DU POUVOIR ANTIOXYDANT ET DE LA COMPOSITION PHENOLIQUE DE
ID 662 PLANTES MEDICINALES GASTRO PROTECTRICES
NEHARI ASSIA, SADOK zeyneb, KOICHE Malika, MEDJKANE Meriem
Computational Study of Salvia officinalis Compounds Using Density Functional Theory (DFT)
ID 444 and Their Potential Biological Activities.
RIDHA BENDAAS, Khaled HANFOUG
12
 The Thiobarbituric Acid Reactive Substances (TBARS) Test as an Indicator of Essential Oil
ID 481 Oxidative Stability.
Boutemtam Leila
Extraction & Comparative study of activities: Antibacterial, Antifungal and Antioxidant of
ID 464 extracts of essential oils from cumin seeds and fennel seeds.
fayssal boudjellal
CO-CRYSTALLIZATION BY FUSION OF RAMIPRIL AND METRONIDAZOLE WITH A 9/1
ID 374 RATIO (RM)
Fatima MILES
Source naturelle de molécules antioxydantes – étude Bio-chimique.
ID 788
SADOK Zeyneb
etimation de leffet de site topographique de la ville de boumerdes par une approche
ID 1473 numerique
salima ait el hocine, FATIHA DEBICHE, TAHAR MESSAFFER
Title: Mass parameters, Bohr Hamiltonian and resolution for the 160Gd isotope
ID 1156
Besma Belaifa, Atika Mehedi
Assessment of Seawater Intrusion Dynamics in a Coastal Aquifer: Case of the Bay of Algiers
ID 1309
BENAMAR Mohammed Abdelillah, KHOUS Dalale, CHORFI Hadjer, ZEMOUR youcef
GREEN CHEMISTRY APPROACH TO HEMI-SYNTHESIS USING CINNAMOMUM CASSIA
ID 440 ESSENTIAL OIL AS A RENEWABLE FEEDSTOCK
BRAHIM CHERFAOUI
Synthèse of an activated Carbon-nanocomposite for the traitement of polluents
ID 817
TABTI Senouci
Synthesis and characterization of activated carbon produced from a raw lignocellulosic material
ID 411 for the adsorption of pollutantsVisa de la faculté
soufi belkhir, cherbi rekia, aissaoui regadia
Evaluation of the antioxydant and antidiabetic effect of Berberis vulgaris
ID 1768
Wafa Kouadri Boudjelthia

14:30-16:00 Oral Session 2| wednesday, June 11th, 2025

Lecture Hall A | Materials and Environment
Oral Session Chairs: Pr. Abderahmen DJAAFER, Dr. Malika MEZIANE, Dr. Kamel MOKHNACHE
Structural, Environmental and Economic Benefits of Using Glass Powder for Manufacturing
ID 594 High-Performance Concrete
Oussama Douidi, Ahmed Tafraoui, Abdelkadir Makani
Valorization of Dam Sediments as Additives in Self-Compacting Eco-Concrete: A Sustainable
ID 843 Engineering Approach
Ahmed Sweiti, Rabah Chaid, El-Hadj Kadri
RECENT PROGRESS OF HALIDE PEROVSKITES SOLAR CELLS
ID 752
Krarcha Hadda
Mitigating Environmental Impacts of Phosphate Mining: Strategies for Sustainable Waste
ID 833 Management at Djebel-Onk
Hayet Makhdoumi, Imen Aichouri, Mohamed Chettibi
Synthesis and application of bidimensional 2D-materials MXenes/MBenes as oil additives: for
friction and wear reduction.
ID 1652
Abdessabour BENAMOR, Nabil Chiker, Sara Ramdoum, Hiba Benamor, Adel Haddad, Youcef
Hadji, Mohamed Hadji
Temperature Influencing Biofilm Adhesion and Their Impact on Biocorrosionof Carbon Steel in
ID 1032 Industrial Environments
Hadjer DIDOUH, Omar Bouledroua, Mohammed HADJ MELIANI
Identification of Work Hardening Behavior of Steel Sheet Using Digital Image Correlation
ID 1633 Technique
Amina BELGUEBLI, Ibrahim ZIDANE

13
 14:30-16:00 Oral Session 2| wednesday, June 11th, 2025
Lecture Hall B | Renewal Energy and Electrical Engineering
Oral Session Chairs: Pr. TALEB Rachid, Pr. BENBOUALI, Dr. Boubaker BESSEDIK
Enhanced Direct Current Control with Pulse Width Modulation PWM for Three-Level Shunt
ID 1103 Active Power Filter
FATIHA BOUHADJI, Ismail Bouyakoub, F. MEHEDI, Z. REGUIEG, Walid Mohammed KECEMI
Application of Enzymatic Pretreatment of Whey for Biohydrogen Production in Semi-
ID 512 Continuous Mode
Anissa Mouna Khezzar, Esma Bouchareb Mahfouf, Saadia Benelhadj Djelloul
Processor in the loop verification of A Dual-Extended Kalman Filter used in the control of a
ID 462 Grid-Connected PV inverter
Aboubakr Brahimi, Djallel Kerdoun, Abderraouf Boumassata, Kaouthar Lalia Dahmani
Experimental Characterization of a Natural Sugar Alternative (Erythritol) as a Phase Change
ID 563 Material for Latent Heat Storage in Solar Cookers, using the T-History Method.
Merouane Zedairia, Mahfoud Kadja, Arezki Harmim
Design and Implementation of a Smart IoT-Based Energy Meter for Real-Time Monitoring of
ID 783 Photovoltaic Systems
ROUABHIA Abdelkrim
Study and simulation of a hybrid PV/ Battery system with a load
ID 1140
Elhadj RAHMA, Toufik TAHRI, Mohamed DEKKICHE
2D Underactuated Biped Robots: Modeling and Control.
ID 1739
Ali Guessam, foudil Abdessemed

14:30-16:00 Oral Session 2| Wednesday, June 11th, 2025

Lecture Hall C | Mechanical Engineering
Oral Session Chairs: Pr. Hammou ZAHLOUL, Mohammed MANDAS, FEKAOUNI Mohammed
Analysis of Subharmonic Instabilities of Interfacial Gravity–Capillary Waves
ID 450
Chikhi Sara, Allalou Nabil, Debaine Mohammed
Damping Reduction Factors Evaluation Considering Epicentral Distance and Local Soil
ID 713 Characteristics Effects
Abdelmalek Abdelhamid, Baizid Benahmed, Issam Aouari, Idriss Rouaz
Numerical investigation on free convection inside enclosure with discrete heating from below
ID 899
Benameur Bouamoud, Samir HOUAT
Statistical Analysis of the Effect of Cutting Parameters on Tool Wear and Surface Roughness in
Hard Machining of AISI 4140
ID 535
Mohand Ouidir Sahbi, Abdelhamid Sadeddine, Mohamed Athmane Yallese, Salim Belhadi,
Abdelatif Belamri
Contribution to the Assessment of the Energy Performance of Reinforced Concrete Buildings in
ID 1416 an Arid Climate: Case of the City of Bechar
Imane BENOUDJAFER, Slimane ZIAD, Ibtissam BENOUDJAFER
Influence du relevage hydraulique du tracteur agricole sur le transfert de charge
ID 1393
hussine Amar
Predicting Earthquake Ground Motion Parameters in Soft Soil Sites Using Nonlinear Regression
ID 847
Issam Aouari, Aicha Rouabeh, Baizid Benahmed, Mehmet Palanci

14
 14:30-16:00 Oral Session 2| wednesday, June 11th, 2025
Lecture Hall D | Nano-Sciences
Oral Session Chairs: Pr. BOUDJEMAA Abdelaali (UHB Chlef), Dr. HADJ KHELIFA Mohamed (UHB
Chlef), Dr. RAKRAK Kaddour (UIK Tiaret)
Preparation and characterization of a series of Nano-perovskites LaAl1-XFeXO3 (X= 0- 0.1- 0.2)
ID 1439
Hamza Medjadji
Influence of Black Silicon Morphology Combined with FSF/SiO₂ /SiNx Stack on Optical and
Electrical Properties for Photovoltaic Applications
ID 1500
Nabil Khelifati, Fatima Samili, Nesrine Laidoune, Ghania Fortas, Leila Harkat, Amine Mefoued,
Warda Ouldmohamed, Brahim Mahmoudi
Magnetohydrodynamic Natural Convection of Nanofluids in a Square Cavity with an
ID 1276 Embedded Cold Block
KHERROUBI Seddik, MODERRES Mourad
Synthesis and Characterization of Cobalt-Doped Nanoferrites
ID 1673
BENKRIFA Zohra
la méthode verte pour la préparation de nanoparticules d'oxyde de zinc
ID 1131
BOUTALBI ABDERRAHMANE
Encapsulation d'huiles essentielles dans des nanoparticules biodégradables : une stratégie
ID 476 antifongique contre les infections nosocomiales
ZAHRA DOUILI

14:30-16:00 Oral Session 2|Wednesday , June 11th, 2025

Lecture Hall E | Nano-Sciences
Oral Session Chairs: Pr. KHENATA Rabah (UMS Mascara), Pr. BELABBAS Mohamed (UHB Chlef),
Dr. REKAB-DJABRI Hamza (UAMO Bouira),
Reducing of the Preparation Time and improving the Critical Temperature of the Bi-
2212 Superconducting Phase using the Photopolymerization Reaction.
ID 458
Mourad Mimouni, Chaima Rabhi, Ghani Rihia, Mebrouk Ghougali, Mohammed Sadok
Mahboub, Samia Ramdani
ID 1735 A b Initio Study of the Structural, Electronic, and Optical Properties of AlₓGa₁₋ₓAs Alloys for UV
Optoelectronic Applications
Kheira Chebbah, Fatiha Besahraoui, Lakhdar Boumia
ID 1059 Modeling Multi-Step Transitions in Hybrid Spin-Crossover Nanostructures: Elastic Coupling
Effects
Hassane OUBOUCHOU, Rachid TRAICHE, Kamel BOUKHEDDADEN
ID 1433 Nanoparticles effect on the hybrid journal bearing performances
BOUBENDIR SID ALI, MALKI Maamar, Larbi Salah, BOUBENDIR Lynda
ID 1158 Influence of Position-Dependent Effective Mass on Bose-Einstein Condensate.
miraoui somia
ID 1007 Isomorphism between the electro-elastic modeling of the spin transition andIsing-like model
with competing interactions: Elastic generation of selforganizedspin states in 1D SCO chain.
Traiche Rachid, Oubouchou Hassane, Mouloudj Hadj

15
16:15 – 17:00 Poster Session 3 | Wednesday, June 11th, 2025
Hall 2000 | Materials and Environment
Implementation of the Systemic Approach and Systems Engineering in the Small Dams Design
Id 638
Kouider Benmia, Rouissat Bouchrit, Bouanani Abderrazek
The factorial design applied for modeling the metronidazole antibiotic removal in microbial
ID 1116 electrolysis cell integrated with electro-fenton process
Nadjiya FETTAH
Etude la cinétique de l’adsorption compétitive des colorants Bleu Evans et Rouge Congo sur
ID 1556 l'argile marneuse naturelle
Nora Sahraoui
Enhancing photocatalytic performance by Synthesis and Characterization of TiO2
ID 390 Nanoparticles loaded on Iron Oxide Sludge for Photodegradation of Organic Pollutants
mourad ouanid, Boubakeur Asli, rachida cherrak, zerrouk Bekri
‎Characteristics of Micro Cellulose extracted from Seaweed Wastes as Reinforcement green
Composite
ID 1701
Nihad Amamra, Samira Maou, Yazid Meftah, Asmaa Benharket, Leila Djahnit, Fatima zohra
kermezli, Fouzia Ouadah bensalah
Development of carbon materials with controlled porosity for the elimination of emerging
organic contaminants
ID 422
AHMED BENDJEBBOUR, Bendjelloul Meriem, Benhachem Fatima Zahra, Amairi Chaimaa,
Seghier Abdelkarim, Boucherdoud Ahmed, Elandaloussi El Hadj
Low cost Biochar and biochar composites derived from marine residues for eco friendly uses
ID 1252 Asma Benharkat, Samira Maou, Yazid Meftah, Nihad Amamara, Leila Djahnit, Fatima zohra
Kermezli, Fouzia Ouadah bensalah
Montmorillonite/Alginate beads for the removal of malachite green from aqueous dye
solutions
ID 734
Boukhatem Horiya, Rezala Houria, Boudriche Lilya, Djouadi Lila, Saidani Amira, Douba Amel,
Bacha Salah
Photocatalytic performance and environmental applications of Cr:ZnO and Al:ZnO thin films
ID 455
Dikra Bouras, Mamoun Fellah, Fouzia Hamadi
Hydration heat of binders with various construction waste powders.
ID 1567
MANAL EZZIANE, Karim EZZIANE
Recovery of sludge discharged by the Taksebt treatment plant in Tizi Ouzou in Algeria
ID 558
AIT MEDJBER Farida
Response Surface Methodology for Optimizing Anionic Dye Adsorption from Synthetic
ID1004 Wastewater by Superparamagnetic Nanoparticles
Hennaoui Siham, El-Miloudi Khaled
Impact of Combining Industrial Waste-Based Fillers on the Physicomechanical Properties of
ID 685 Desert Sand Concrete
mohamed merniz, Madani BEDERINA, Abdelaziz MEDDAH
Cementitious Materials in the Oil Industry: A Study on the Effect of Temperature on Oil Well
ID 1029 Cement Properties and Its Role in Environmental Protection and Equipment Safety
Nabil Toum
Évaluation de la compacité des mélanges granulaires secs destinés à la formulation du béton à
ID 1080 l'aide du modèle fractal d'empilement granulaire
Mohammed ROUIBI, Kaddour CHOUICHA
Computational investigation of CsSnBr₃ perovskite: Insights for solar cell materials
ID 1010
Samir CHAREF, Dhilal ALOUANI
Development of a Chemical Sensor Based on Mercury thin Film and Gold Nanoparticles for
ID 1743
Selective Detection of Cadmium Ions Cd+2

16
 ameur amara
Low-Cost Biosorption of Dyes from Wastewater Using Agricultural Waste Materials
ID 1142
Nawel Zerrouki, Abdelkarim Seghier, Wahiba Cherrak, Narimane Kheddam
Effet de la variation de finesse sur la réactivité de la poudre de béton recyclé
ID 886
djamal eddine atamna, mohammed siline
Assessment of the Efficiency of the Activated Sludge Wastewater Treatment Plant at Ain Houtz,
ID 768 Tlemcen, Northwestern Algeria.
Abderrahim BADRAOUI, Sidi Mohamed TIAR, Chérifa ABDELBAKI, Madani BESSEDIK
Gilthead sea bream gelatin as wall-forming material for microencapsulation
ID 1330
farah ben abbes, Abir Drihem, ikram Bentelha
Development and Optimization of Hexavalent Chromium-Free Eco-Friendly Anodizing
Strategies Using TSA and TPA Electrolytes to Enhance Corrosion Resistance, Surface Durability,
and Long-Term Protection of 2024 Aluminum Alloy for Aerospace and High-Performance
ID 579
Industrial Applications
Manel BENMOHAMED, Ahmed HADDAD, Hadil meriem BOUHADJAR, Hassiba
BOULHOUACHE
A Review on eco-friendly fibres reinforced lime mortar: a solution for durability in extreme
ID 952 climates
mohamed boudjemaa, ali zaidi, khadra bendjillali
Transient Hygrothermal Aging Analysis of Thin Polymer Matrix Composite laminate Behavior.
ID 862
Billel BOUKERT, Mohamed Khodjet Kesba, Amina BENKHEDDA, El abbes ADDA BEDIA
Physical properties and thermoelectric performance calculated by first principle of
ID 1143 Half Heusler IrMnAs alloy
salim Kadri, Rabbie Amraoui, Aziza Boutouta
Traitement électrochimique des eaux usées de colorants azoïques synthétiques par
électrocoagulation : optimisation et évaluation de l'efficacité
ID 760
Souad CHERIFI, Meriem FIZIR, Abir MAHAMMEDI, Bakhta NOUNE, SalahEddine AOUDJ,
Abderrahmane Djafer
Mesoporous Silica-Based Polymer Composite Beads for Efficient Malachite Green Removal
from wastewater
ID 1640
Houda DOUBA, Meriem Fizir, Nadjia Kebiti, Smain Sabour, Mourad Bidaoui, Faiza Zermane,
Benamar Cheknane
Stratégies passives d’amélioration thermique des briques creuses en climat chaud par intégration
ID 1150 de MCP
HADJADJ Mohammed, NEHARI Taieb, ZEHOUANI Zahra Assala
Structural, optical and magnetic properties of CoFe2O4 nanomaterial for environmental
applications
ID 1612
Hani Hadjoudja, Charafeddine Sedrati, Hichem Sedrati, Souheyla Gagui, Bouzid Hadjoudja,
Baghdadi Chouial
Valorisation de déchets végétaux pour l’adsorption d’un micropolluant pharmaceutique :
ID 1121
étude paramétrique et cinétique
Effect of cement and lime ratios on the compressive strength of clay bricks made from different
ID 1727 soil types
Zakarya Laouidji, Mourad Boutlikht, Kamel Hebbache, Abdellah Douadi
Insight into the structural, electronic, and magnetic properties of vanadium-doped Li2S
ID 1260 compound
Hemza Mancer, Habib Rached
EFFECT OF Sn DOPANTS ON THE STRUCTURAL, MORPHOLOGICAL AND OPTICAL
ID 518 PROPERTIES OF ZnO THIN FILMS
GHERIB MEBARKA
"First-Principles Investigation of the Structural and Electronic Properties of a Binary Intermetallic
ID 863 Compound"
Mimoun Benouis, Lakhdar Boumia, Ali Bentouaf
la Rétention du CO2 par MCM-48 Modifié par des Dendrimère
ID 1352
Ghomari Mohammed kamel, Boukoussa Bohdjar
17
 OPTIMISATION OF CELLULOSE FILMS USING THE EXPERIMENTAL DESIGN
ID 841
Zineb Rais
Analyse DFT de la stabilité structurelle et phononique d'un nouveau demi-Heusler basé sur un
ID 1123 élément alcalino-terreux prometteur pour des applications énergétiques durables
hanane saib, hanane Benmahdjoub, Wiam Maafa
Application of a Rigorous QA/QC Protocol to EDXRF Spectrometry for the Elemental Analysis
of Archaeological Materials.
ID 725
SEGHIR ABDALLAH Houcine, BENAMAR Mohammed El Amine, BEKHTI Wided, ABDELLAH
ELHADJ Adel
Distribution of Rare Earth Elements in Archaeological Soils
ID 913 NABILA TAIBOUNI, NAIMA BELOUADAH, LEILA YETTOU, OUAFA BEN AZOUZ, NAZIHA
BOUDRA, CAMELIA YASMINE MEDOUR
Elastic and Thermodynamic Properties of Niobium Carbide Compound: Hard Anti-Corrosion
ID 779 Coating Material via Ab Initio Method
ABDELLAH ELHADJ Adel, BELKHARROUBI Fadila, AZZI Saliha, SEGHIR ABDALLAH Houcine
L'effet des stabilisants ciment, chaux et pouzzolane naturelle sur la résistance à la compression
des blocs en terre crue BTC
ID 1216
Sid Ahmed BEKHTI, Nasr-Eddine BOUHAMOU, Imene BENAISSA, Souad MALAB, Abdelkadir
BELGHIT, Nadia BELAS
Effect of Pressure and Temperature on Total and Partial Magnetic Moments in Mn₂NiAl
ID 576
Kadri Salim
Removal of anionic dye by adsorption on activated carbon
ID 1118
khalili khadidja
Numerical Simulation of Atmospheric Dielectric Barrier Discharge in Oxygen gas using
ID 1073 COMSOL Multiphysics
Nesrine Labdouni, Djilali Benyoucef, Hocine Tebani
Synergie entre granulats recyclés et fibres d’alfa pour optimiser la conductivité thermique du
ID 902 béton.
Benguedouad Ouissam, Siline Mohammed, Ghorbel Elhem
Etude de premier principe des propriétés structurales, électroniques ,élastiques et optiques du
ID 956 pérovskite halide CsGeCl3
Souad BOUSALEM
Material-based Green hydrogen storage
ID 536
Youcef SID AMER
Évaluation du potentiel des fibres textiles issues de PET recyclé par analyses physico-chimiques
ID 609 et mécaniques
Omar HASSI, Rabeh SLIMANI, Sahnoun ZENGAH, Ismail DRAI
Comportement thermo-mécanique d'un composite cimentaire à base de sédiments issus des
barrages
ID 1198
Hanaa Kawther TERRAH, Zine El Abidine KAMECHE, Hocine SIAD, Mohamed LACHEMI,
Youcef HOUMADI
Zéolites de mordénite à métaux de transition échangés : étude comparative des changements
ID 1154 structurels et texturaux
IKRAM YSSAAD, FATIHA HAMIDI
Crude glycerin recovery from date kernel ,rapeseed (Brassica napus L) and linseed (Linum
ID 664 usitatissimum) oils and pharmaceutical application
farah ben abbes, Rachid Belhattab, hadjer zekkour
Estimation of physical properties and transport performance of Heusler Co2MnGe alloy based
ID 1135 on DFT calculations
Aziza Boutouta, Salim Kadri, Rabbie Amraoui, Amor Bouaricha
EXTRACTION OF PUNICA GRANATUM ESSENTIEL OIL AND APPLICATION IN THE
ID 395 PREPARATION OF ORGANIC SCENTED CANDLES
Nardjesse Nemiche
Ab initio investigation of the physical properties of a Half-Heusler alloy
ID 1726
said chahlat, Sabrina BOUNAB, Lahcene NASRİ
18
 Cinétique et mécanismes d’adsorption des polluants organiques sur un biopolymère en solution
aqueuse
ID 1680
AMAIRI chaimaa, Bendjelloul Meriem, Benhachem Fatima Zahra, Bendjabore Ahmed,
Boucherdoud Ahmed, Seghier Abdelkarim, Elandaloussi El Hadj
Impact of Reducing Nitric Oxide on the Degradation of Acid Green 25 Dye in Gliding Arc
ID 1688 Discharge
Ghania Benhamdi
Study of the Dielectric Function as a Fundamental Optical Property of CdMnTe
ID 1249
Hanane BENMAHDJOUB, Habib RACHED, Sihem AMARI, Amel MERRAD, Hanane Saib
Eco-Materials for Water Treatment: Performance of a Cynodon dactylon-TiO₂ Bio-composite
ID 807 for Decolorization of Textile Wastewater
Benzerafa Asma, Hamoudi Aicha, Boulaouche Tarik
Waste-to-Resource: Functional Hydrogels Derived from Polymers for Environmental and
ID 1097 Agricultural Sustainability
Khayerddine KHROUFI
Propriétés rhéologiques et mécaniques des mortiers autoplaçants à base de sable recyclé et
ID 868 laitier
Omar Kouider djelloul, Touhami Tahenni
synthesis and characterisation of activated carbon produced of raw lignocellulosic material for
ID 413 the adsorption of pollutants
soufi belkhir, aissaoui regadia, Cherbi Rekia
Carbon Nanotube-Based BioFET: Toward Reliable and Rapid Detection of SARS-CoV-2
ID 1082
oussama zeggai

09:00 – 09:45 Poster Session 4 | Thursday, June 12th, 2025

Hall 2000 | Renewal Energy and Electrical Engineering
Free vibration analysis of behavior for functionally graded FGM sandwich plates
ID 1038 KRALIFA ABDERRAHIM SOUFFIANE, Benferhat Rabia, Zidour Mohamed, Tahar Hassaine
Daouadji, Tayeb Bensatallah
HIGH TEMPERATURE BEHAVIOR ON THE PROPERTIES OF FIBER CONCRETE
ID 1708
bennaceur ali, mazouz badis, achour yacin
Experimental Assessment of Grid-Induced Modifications in Turbulent Jets for HVAC
Applications
ID 385
Assiétou Moussa Maiga, Fatima Zahra Khedim, Abdelhak Fellague Chebra, Ali kHELIL,
Mohamed Braikia
Fault-Tolerant Fixed-Time Control Using Self-Structuring Networks for a Coaxial Rotor
UAVwith Sensor and Actuator Fault
ID 402
aymene bacha, Abdelghani Chelihi, Mohamed Achraf Senoussi, Aimen Abdellah Bouais,
Mohamed Lakhdar Tiar
ID 1786 Biotechnological Valorization of Molasses for Bioethanol Production in Algeria
Fatima Zohra Baouche, Djilali ELHADJ Djilali, Cherifa KARA MOSTEFA KHELIL, Ihssen
Hamzaoui, SELIM Aya, HATTAB Soumia
A Wavelet-Based Approach for Improved Defect Localization in Ultrasonic Non-Destructive
ID 1643 Testing
Ahmed BAHI AZZOUOUM, Ahmed Benyahia, Houcine GUESMI, Nabil Hafi
Energy management of an electric vehicle with a hybrid storage system: Battery/super
ID 718 capacitor
Basma Benbouya
Artificial Neural Networs for Incompressible Flows.
ID 1774

19
 Abdelbari Merwan

Contribution to Wind Turbine Control Using AI-Based Inverter for DFIG Systems
ID 1775
Azzedine Khati
Static Optimization of the Combined Heat and Power Economic Dispatch (CHPED) Using the
ID 823 AVOA Method
kaouthar lalia dahmani, aboubkre brahimi
ID 1771 Numerical Study on the Effect of Intake Manifold Parameters on the Internal Combustion
Engine Performances
B. MENACER , C. Belhout
ID 1772 Simulation Numérique d’Écoulements Non Newtoniens dans des Mélangeurs Statiques à
Gouffres : Influence des Paramètres hydrodynamiques et énergétiques
C.Belhout, K. Amrani , F.Z.Khelif, B. MENACER , M.Bouzit
Effect of Flexible Vortex Generator Length on Flow Dynamics and Thermal Mixing in a
ID 1422 Channel with Discrete Heat Sources
khaoula Dehdouh
Hybrid GA-PSO Optimization of Model Predictive Control Parameters for Enhanced
ID 538 Performance in Nonlinear Chemical Processes
habiba houari
Effect of Space-charge Field Time variation on the Photorefractive Effect in Semi-insulating
ID 1418 GaAs.
Ibrahim LAGRAA, soufyane TALEB
Satellite patch antenna array based on FR4 Substrate dielectric materiel
ID 732
soumaya larouci, khaoula toudert, Amine rabah
Control Of Coupled Axial-Torsional Vibrations In Petroleum Drill String Using A Fractional
Approach
ID 1507
Sabrina MEDDAH, Abdelhakim IDIR, Mohamed Zinelabidine DOGHMANE, Sid Ahmed
TADJER, Madjid KIDOUCHE
Broken Bar Fault Detection In Induction Motor Using Leakage Flux Analysis Method
ID 586
Rabeh Chehda, Salah Marih, Mohamed Boudiaf Koura
Fabrication of a Low-Cost Vertical Dip Coating Machine for Thin Film Deposition
ID 487
SADOUKI Bellal, AZZOUG Rabah, BENRABAH Bedhiaf, BENHEBAL Hadj
Electrochemical Corrosion behavior of API X70 steel in 1% Wt HCl, H2SO4 and H3PO4
ID 1035
Mellak Nadjat, Zidelmel Sami
Study of the Synergistic Effect of Two Advanced Oxidation Processes on the Degradation of
ID 1585 Chlortetracycline Antibiotic
Mustapha ZOUANTI, Djamila AOUAMEUR
"Optimization and Comparative Validation of Discharge Calculation Formulas for Submerged
ID 551 Rectangular Weirs in Geotechnical Structures"
bachir mebarki, Faris BELAABED1, Ishak ABDI, Leila ARABET
Robust Detection and Separation of Short Circuit Fault, Saturation Effects, and Supply
ID 1014 Asymmetries in Permanent Magnet Synchronous Motor Drives
Mohamed Boudiaf Koura, Salah Marih, Rabeh Chehda
Optimisation des paramètres de soudage par ponts et leurs effets sur le comportement
ID 1734 mécanique
RAMDANI MOHAMMED, BENACHOUR Mustapha, RAHOU Mohammed
Hybrid Comparison of Empirical and artificial neural network Models for Fatigue Crack
ID 1152 Propagation
abdelfetah moussouni, Nadjia BENACHOUR, Mustapha BENACHOUR
Comportement mécanique des stratifiées composites sous chargement statique : effet de
l'empilement et de l'orientation des fibres
ID 1041
KRALIFA ABDERRAHIM SOUFFIANE, TAHAR Hassaine Daouadji, Zidour Mohamed, Tayeb
Bensatallah
ID 1362 DWT-Based Imperceptible Watermarking for Copyright Protection
20
 Sarra Bencella, Ali SEDDIKI, Abdelkrim Ghaz
Sedimentological Analysis of the Illizi and Berkine Basin: From OutcropStudies to Depositional
ID 736 Models
Hassina BEROUR, Moussa Sadaoui, Mourad Medaouri
Backstepping controllers for Trajectory Tracking of Mobile Robot Wheeled
ID 753
labane chrif, Mekkaoui Mohamed, Meddahi Youssef
Modeling Study on Tunnel Excavation Using a Roadheader Machine – Case Study: Rass El Ma
ID 1173 – Azzaba Railway Tunnel, Algeria.
Nacereddine Fellouh, N.El Isslam Ketfi, Abdellah
Optimisation de la gestion des moteurs électriques par le contrôleur intelligent UMC100.3
ID 1187
GOURI Ammar, Zidane achrefeddine
One-dimensional modeling of a low-pressure radiofrequency discharge
ID 1169
Habel Elhadj
The influence of geometry on the temperature of a synchronous toothed-belt transmission
ID 979
Abdelhak HAROUN, Sidi Mohammed Merghache, Amine Hamdi, Mihoub MEDKOUR
: Analysis of defects in enameled sheets from national industrial production
ID 1629
Fatiha Keraghel, Samir Tebbane
Optimization of medium voltage composite insulator profiles using Finite Element
ID 1600 Method and Artificial Neural Networks
Mhamed MARICH, El hadj Habel
Prediction of the Force Absorbed by a Multi-Crack GFRP Composite Plate Using an
Optimization Algorithm
ID 1587
FAHEM Noureddine, OULAD BRAHIM Abdelmoumin, SOUICI Abderrahmene, ZARA
Abdeldjebar, ARIBI Chouaib
Numerical Investigation of Vertical Deformation in L-Shaped Reinforced Concrete Elements
ID 622
ghoul sahraoui, Ali Ahmed-Chaouch
The Equivalence Electrical Performance between the Plane - Plane and Multiple rods-rods
ID 405 configurations of a Uniform Polluted Glass Insulator
samia satta, Abdelhafid Bayadi
Robust Fault-Tolerant Control of Power Inverters under Actuator Fault Conditions
ID 972
Abderrahim TOUIL, Fatima BABAA, Nacer MERABET, Kenza BOUARROUDJ
A Signal-Based Approach to Early Detection of Broken Rotor Bar Faults in Induction Motors
ID 973 Using Hilbert and Fourier Transforms
Nacer MERABET, Fatima BABAA, Abderrahim TOUIL, Kenza BOUARROUDJ
Data-Driven Smart Diagnosis of Broken Rotor Bar Faults in Induction Motors Using the
ID 975 Random Forest Method
Kenza BOUARROUDJ, Fatima BABAA, Abderrahim TOUIL, Nacer MERABET
Integrated Material Solutions for Reducing Heat Transfer and Energy Demand in Building
ID 904 Envelopes
Zahra Assala ZEHOUANI, Taieb NEHARI, Mohammed HADJADJ
Analyse de l'impact de certains paramètres structuraux sur la réponse sismique d’une structure
ID 1282 auto-stables en béton armé
Ines Aouf, Mohammed Berradia, Sarra Sendjasni
Simulation and Optimization of Hybrid Photovoltaic Systems using HOMER Software:
ID 1544 Influence of Materials and Climatic Conditions
Hocine MAAMMEUR, Djamel Belatrache
Estimation Study of Green Hydrogen Production Utilizing Wind Turbine Systems in Isolated
ID 1370 Regions of Algeria
Zhour Abada, Hocine Maammeur, Djalel Dib
Design and Control of a Single-Phase AC Microgrid with Solar Generation and Battery Storage
ID 636 for Residential Use
YOUSFI ABDELKADER, Bot Yuocef, Mehedi Fayçal, Khelifi Otmane Khelifa
Integrative and Optimization Analysis of a Solar-Wind Energy System Supported by Artificial
ID 1160 Intelligence in a Simulated Environment
khentout abdelkader, Maammeur Hocine, ABDESSELAM Yassine
21
 Integration Renewable Energy Systems with Interconnected Power Systems for Stability
Enhancement Using Advanced Control Based on Intelligent Oscillations Dampers System
ID 796
Moussa BAKDI, Rachid TALEB, Asma TOUALBIA, Fayçal MEHEDI, Souaad TAHRAOUI,
Madjid MERIEM BENZIANE
Zéolite Y à base d'argile naturelle et sa capacité à capturer le dioxyde de carbone par échange
de cations
ID 714
bekri Zerrouk, Adel Mokhtar, Rachida Rahmani, Mourad Ouanid, Fatma Chergui, Mohammed
HACHEMAOUI, boukoussa bouhdjer
Optimal tuning of PI controller using Krill Herd algorithm for wind turbine application
ID 780
Yamina BELGAID, M’hamed HELAIMI, Rachid TALEB, Abdelaziz ZERGLAINE, Hemza SAIDI
Hydrodynamic Analysis of Point Absorber Wave Energy Converters Using Boundary Element
ID 1210 Method
Samir Miloud Belghoula, Abdessoufi Benhamou, Sylvain Sébastien Guillou
Electromechanical study the wind energy conversion system based DFIG and SCIG generators
ID 828
Samir BELLARBI
Design and Experimental Validation of a Solar Chimney Power Plant Prototype
ID 1301
youcef benettayeb, Abderrahmane Benbouali, Toufik Tahri, benali alouache
Advanced fuzzy logic-based power management for hybrid electric vehicles integrating fuel
ID 1672 cells and supercapacitors under dynamic driving conditions
berroudji ahmed, larbaoui ahmed, tabti khatir, alouache benali
Advanced Frequency Regulation in Hybrid Power Networks with HVDC-Based Energy
ID 965 Exchange
Houari BOUAMEUR, Tayeb ALLAOUI, Aicha AISSA BOKHTACHE, Rachid TALEB
Design of a Low-Cost Microcontroller-Based Narrowband PLC System with Scalable Node
ID 1394 Architecture
hamid chatbi, Sid Ahmed TADJER, Fathia CHEKIRED
Influence of Environmental Conditions on Bio-Inspired Wind Farm Optimization: A
ID 1444 Comparative Study of GA and AVOA
Wahiba El Mestari, Nawal Cheggaga
Offshore Wind Resource Assessment in Jijel, Algeria: Toward a Sustainable Mediterranean
ID 525 Energy Future
Salah MARIH, Rabeh CHEHDA, Mohamed Boudiaf KOURA
Improved performance of the multi-phase permanent magnet synchronous motor using
synergetic control strategy
ID 1024
Fayçal Mehedi, Ismail Bouyakoub, Abdelkader Yousfi, Rachid Taleb, Zakaria Reguieg, Lemya
Djafer
An Optimization Framework for Energy and Battery Management Systems Based on Genetic
Algorithms
ID 1572
alouache benali, Helaimi M’hamed, Allouache hadj, A. Gabbarb Hossam A. Gabbarb,
BELMADANI Bachir, benettayeb Youcef benettayeb
Modeling and Advanced Control of a permanent magnet-based wind energy system using a
ID 1185 multilevel converter for enhanced power quality injection
Ihssen Hamzaoui, Farid Bouchafaa, Fatima Zohra Baouche, Cherifa KARA MOSTEFA KHELIL
Intelligent Real-Time Fault Diagnosis and Adaptive Optimization of a Multi-Source PV–Wind
ID 1114 System Using IoT and AI Algorithms
meziane kaci, zakaria layate, slim rouabah, hakim ait said, hamou nouri, hassan ezziane
Mapping and Assessment of Wind Energy Potential in Tindouf Using WAsP: A Case Study
ID 555
Salah marih, Mohamed Boudiaf Koura, Rabeh Chehda
High performance speed control of multi-phase induction motor drives using third-order
sliding mode strategy and a three-to-five phase matrix converter
ID 1095
Fayçal Mehedi, Ismail Bouyakoub, Abdelkader Yousfi, Rachid Taleb, Zakaria Reguieg, Youcef
Bot
Synthesis of PPy/ZnO Nanocomposites for High-Performance Supercapacitors.
ID 383
Mohamed Cherif MAKHLOUFI, Billel Zahaf, Amine Didaoui
ID 1615 Thermal Effects on the Efficiency of InAs/GaAs Quantum Well Solar Cells
22
 Soufyane TALEB, Ibrahim LAGRAA, Mohamed MOUMNA, Moustafa TADJINE
Practical Implementation of an Efficient Control of Standalone Induction Generator for Wind
ID 1242 Energy Systems
Oussama Abdessemad, Ahmed Lokmane Nemmour, Lamri Louze
Application of the "DISRUPT AND OBSERVE" method for maximum power point tracking of a
ID 819 photovoltaic system
Mohamed ALI MOUSSA, Lakhdar CHOUIHA
Enhancing the electrical storage system's efficiency in a solar generator
ID 506
Mandi Benaissa
Hydrodynamic Analysis of Oscillating Water Column Devices for Marine Energy Harvesting
ID 1221
abdessoufi benhamou, Samir Miloud Belghoula, Sylvain Sébastien Guillou
Preview of Next-Generation Carbon-Free Energy Storage and Sustainable Power Generation
ID 1763 Based on Iron Powder Technology
Boukhelef Mohamed, Senouci Mohammed, Habib Merouane, Alliche Mounir
Effect of iron quantities on PECVD Prepared ZnO Thin Films Physical Properties: Experiments
ID 1274 Associated with DFT Calculations
Chaimaa Zaoui, Djellal Oussama, Haireche sofiane
Improving the energy performance of a school using straw and recycled plastic
ID 764
MERYEM CHAOUI, bensaad bouraaasia
Conception et simulation de la cellule solaire d'InGaN en utilsant Silvaco et Ogmanano
ID 477
BOCHRA NOR, ABDELHAK BOUSAID, Ihsen Yasser Taleb
Title: Study and simulation of a hybrid PV/ Battery system with a load
ID 1209
rahma elhadj
General study on economic solutions for the energy transition towards renewable energies
ID 982
Mohammed Ali KOUIDRI
"Design and Experimental Analysis of a Small-Scale Solar Chimney Prototype in Tiaret under
ID 629 Saharan Climatic Conditions"
LAHMAR Omar
ID 1796 Experimental Characterization of Shear Moduli in a Glass/Epoxy Laminated Composite:
Application to Orthotropic Behavior
A. Lakhdar.
ID 1797
Evaluation of Mixed-Mode Stress Intensity Factors for Internal Cracks in Functionally Graded
Thermal Barrier Coatings Under Thermo-Mechanical Loading
Tifour Meriem Hidayet, Abdelkader Boulenouar
Fuzzy sliding mode control of a Doubly Fed Induction Generator (DFIG) based wind turbine in
ID 1546 variable speed
Allam Mohamed, Adjoudj Redouane, Benkrama Khadidja
Machine learning Prediction Model for solar power energy
ID 739
okba rahmani
Étude expérimentale de l’influence des paramètres géométriques et météorologiques sur les
ID 1399 performances de cheminée solaire
AHMED AFGHOUL, ALI ATTATFA, Toufik TAHRI
Experimental Evaluation and Modeling of 85 W Solar Panel for Maximum Power Extraction
ID 584 Alla Eddine TOUBAL MAAMAR, Mourad NAIDJI, Aicha AISSA-BOKHTACHE, Maamar
LATROCH, Touhami ABDELOUAHED, Aimad BOUDOUDA
Electronic Structure and Magnetic Properties of CuFeS2: An ab initio DFT/GGA+U calibration
ID 705 study
LARBAOUI Kheira, Lakdja Aziz, Bassou Ghaouti
DFT Exploration of Novel Direct Band Gap Semiconducting Halide Double
ID 963 PerovskitesK2InAgX6 (X = Br, Cl) for Solar Cells Application
amel marrad, Halima Bouchenafa, Boucif Benichou, youssef saksak, Hanane Benmahdjoub
DC bus regulation of a shunt active power filter by FLC and SMC regulators using multilevel
ID 1837 inverters with NPC structure
MAAROUF OMAR, ALI MOUSSA MOHAMED, BELARBI WAHID
23
 11:30 – 12:15 Poster Session 5 | Thursday, June 12th, 2025
Hall 2000 | Mechanical Engineering
Predictive Modeling of Surface Chloride Concentration in Marine Concrete Using CatBoost
ID 1322
Ali Benzaamia, Mohamed Ghrici, Redouane Rebouh
Évaluation comparative du bio-polymère et du ciment Portland pour l'amélioration écologique
de la résistance au cisaillement des sables
ID 1299
Hachemi ADDA BERKANE, Abdelnasser BOUKEFFOUSSA EL ROUL, Noureddine DELLA,
Mehdi MISSOUM BENZIANE
Mechanical Characterization of Recycled and Loaded Materials
ID 410
Boussena Ahmed, Ghazi Abdelkader, Bouchouicha Benattou
Etude des vibrations libres et du flambement des poutres fonctionnellement graduées
ID 424 fonctionnel FGM en utilisant une théorie raffinée d’ordre élevé
Ahmed BEKHADDA, Mohamed ABDI, Benaissa BOUBABOURI
Effect of vegetable fibers on the workability of alkali-activated mortar based on slag and
ID 1740 recycled glass
Hamid BENMOUMENE, Mohamed KECHACHNI
ID 1773 Influence des paramètres clés sur le rendement d’un cycle de Linde simulé sous Matlab.
FOUKRACH Mohammed
ID 1774 Performance d’un cycle frigorifique à compression de vapeur simulé sous EES
FOUKRACH Mohammed
A novel method for reducing slip stress in a composite steel-concrete beam, bonded with an
ID 1040 adhesive.
Hayet Boumediene, Tahar Hassaine Daouadji, Tayeb Bensatallah, Mohamed Zidour
Effet de la poudre de verre recyclée sur les caractéristiques de compactage des sols expansifs
ID 1415
chahera touat, BAHIA LOUAFI
Laboratory investigation on cement-treated sand using UU triaxial tests
ID 1308
Fatma Zohra Chamma, Mehdi Missoum Benziane, Abdelhamid Flitti, Noureddine Della
Modélisation numérique des poutres en béton armé renforcées en flexion par matériaux
ID 1283 composites
Kawthar hamidi, Farid Bouziadi, Bensaid Boulekbache
Efficacité des plaques en matériaux composite le renforcement des poutres en acier
ID 1067
Hassaine Daouadji Maya, Hassaine Daouadji Tahar, Bensatallah Tayeb
Valorisation des fibres recyclées dans les bétons autoplaçants
ID 1226
Nor El-Houda Maameri, Hamza Bensaci, Said Kenai
Performance Analysis of Gypsum Mortar Partially Substituted with Recycled Gypsum
ID 1766
Mohamed amine Ouared, Abdelkader Bougara, Nadjia Kherraz
Simulation Thermique et Structurelle du Béton Soumis à un incendie
ID 1093
SALEM khalil, LAIB Tariq, BAGHDADI Mohamed, DIMIA Mohamed Salah, BERKANE Fatiha
Data-Driven Prediction of Axial Load-Carrying Capacity in FRP-Confined Concrete Columns
ID 1290 Using Machine Learning Approach
Sarra SENDJASNI, Mohammed Berradia, Riad Benzaid, Klaus Holschemacher, El hadj Meziane
Analysis and modeling of wooden beams strengthened by carbon fiber reinforced polymer
ID 1039 Belkacem Elhocine TOUHAMI, Tayeb BENSATTALAH, Tahar HASSAINE DAOUADJI,
Mohamed ZIDOUR
Analysis of the rotational moment in a reinforced column-beam system
ID 474
Aouissi Youcef, Kada Abdelhak, Belkacem Lamri, Mus'ab Salameh
Étude expérimentale de l’évolution du ressaut hydraulique dans un canal rectangulaire à fond
ID 522 rugueux
Abdelouahed Brahimi, Samir KATEB, Mouhamed Amine BRAHIMI
ID 433 Hydraulic Analysis of Drilling Mud Flow Around a PDC Drill Bit Using CFD Simulation

24
 Abdellah Mekedeme, Samir Benammar
Evaluation of the effect of recycled concrete sand on the properties of ordinary concrete
ID 1342
Manel Abdoun, M’hamed Adjoudj, Adem Ait Mohamed Amer, Karim Ezziane
Study of the rheological properties of ordinary concrete with quarry waste sand
ID 1357
Manel Abdoun, M’hamed Adjoudj, Adem Ait Mohamed Amer, Karim Ezziane
Effect of Bending Moment Orientation on the Behavior of Column Base Plate Connections
ID 712
Mohammed El Amin Aichouche
Application of Reverse Engineering: Reconstructing a 3D Model of an Impeller Blade Using a
ID 1190 Coordinate Measuring Machine (CMM)
AIMEUR Noureddine, AMOUR Aissa, LAHMAR Hanine
Hygrothermal Effect on Damaged RC Beams Strengthened with Bio-Inspired Helicoidal-
ID 1188 Recursive Composite Plates
Rezki Amara, Hassen Ait Atmane, Riadh Bennai, Mokhtar Nebab
NUMERICAL ESTIMATION OF THE EFFECT OF THE THERMAL RESIDUALSTRESSES ON THE
PERFORMANCES OF THE BONDED COMPOSITE REPAIR OFMETALLIC AIRCRAFT
ID 1691
STRUCTURES
Zakaria AMINALLAH
Dynamic finite element analysis of interfacial bone-implant stresses
ID 853
Mustapha Amine ARAB, Abdessamed BACHIRI, Nadia KADOURI
Study of the mechanical behavior of a structural steel under the effect of the galvanizing
ID 1197 operation
mohamed babakhali, abdelkader djebli, souad meftah
ID 1778 Experimental Study of the Effect of the Number of Blades on the Energy Performance of a
Savonius Wind
kachour adil, rekeiba rofaida, kamla youcef
ID 1779 Numerical simulation of the design impact of a radial agitator on mixing efficiency
kamla youcef
ID 1781 Dynamic behavior of Porous Power-Law and Sigmoid Functionally Graded Sandwich Plates
Nafissa ZOUATNIA, Latifa OULD LARBI and Lazreg HADJI
Free Vibration Analysis of Functionally Graded Polymer Composite Plates Reinforced with
ID 1782 Graphene Nanoplatelets
Lazreg HADJI, Nafissa ZOUATNIA, Hassen AIT ATMANE and Latifa OULD LARBI
ID 1783 An Efficient Shear Deformation Beam Theory For Mechanical Behavior of Functionally Graded
Beams Based On Neutral Surface Position
Latifa OULD LARBI, Nafissa ZOUATNIA and Lazreg HADJI1
Porosity Effect on the Fundamental Natural Frequencies of FG Sandwich Beams
ID 1784
Guermit Mohamed Bilal CHAMI, Lazreg HADJI , and Amar KAHIL
Design and optimization of tubular composite using stochastic optimization
ID 1785 Abdelkader
LOUZA , Abdelkader HOCINE , Abdelhakim MAIZIA , Levent AYDIN and Ghania
HABBAR
Experimental study of friction stir welding of polymers and its effect on mechanical strength
ID 1531
mohamed babakhali, zakaria aminallah, laid aminallah
Experimental Investigation of the Influence of Tool Rotational Speed on the Mechanical
ID 916 Properties of Friction Stir Welded AA6082-T6 Butt Joints Joints
Bachiri Abdessamed, Arab Mustapha Amine, Kadouri Nadia
Steady-State Heat Conduction in a Half-Space Containing a Penny-Shaped Crack and Subjected
ID 1707 to a Circular Heat Source
Zakaria Baka, Abdelbasset Gouadria
Non linear vibration of sandwich beams
ID 1508
Abdelhak BENAOUM

25
 Classification and Properties of Fibers Used in Reinforced Concrete
ID 876
fatiha berkane, Mohammed Salah Bouglada, Khalil Salem, tariq laib
Etude expérimentale sur le renforcement de sable de Oued Rass (Chlef) par les déchets de
ID 619 briques rouges : effet de diamètre
Ayyoub Bettahar, Maria Arab, Ahmed Arab, Yassine Benghalia
Numerical Prediction of Damage in Steel Pipe Elbows under Coupled Pressure and Bending
ID 660 Using XFEM
Chaaben Arroussi, Mouad Yaichi, Mohammed Amine Khater, Azzedin Belalia
L’effet des paramètres de compactage sur un sol argileux stabilisé par la chaux et fibres de
ID 694 polypropylènes : une étude expérimentale
Anfal Rihab Cheriet, Alaa Abdelmoumen Driss, Mohamed Ghrici
Stability of interfacial gravity–capillary waves in stratified fluids
ID 790
Chaib Meriem, Chikhi Sara, Debiane Mohammed, Allalou Nabil
L'effet de l'angle d'impression sur les propriétés mécaniques du PA12 imprimé en 3D
ID 919
KOUIDER DJELLAL, Benallel Farouk Boukhoulda, Kouider Bendine
Investigation of laminar flow characteristics between two parallel plates.
ID 1258 Ibtissem DJELLOUL BENCHERIF, Ikram khellafi, Sara youcefi, Zineb Hemmami, Azzedine
Hammami
Vibration Analysis of Polymer Beams Reinforced with Carbon Nanotubes on a Variable Elastic
ID 816 Foundation Using HDST
DJILALI DJEBBOUR Kenza, AIT ATMANE Hassen, BENNAI Raidh, NEBAB Mokhtar
Axisymmetric Torsion of an Elastic Layer with an External Crack Induced by Two Coaxial Rigid
ID 1532 Discs
Abdelbasset Gouadria, Zakaria Baka
Advancing Road Infrastructure Design with BIM: A Multi-Criteria Decision Approach for Flood-
ID 941 Resilient Solutions
Hadjar Manal Ikram, Zaoui Mohamed, Bensoula Moahmed
Geometric Modeling of a Piston Compressor Using SolidWorks
ID 1098
Odai Medjahdi
Green inhibitor and its mitigation of corrosion unisng plant extract
ID 1545
Khedim Fatima zahra, Amara Mouna, Hadj meliani Mohammed
Étude numérique de l'amélioration du transfert de chaleur dans une marche descendante à
ID 1733 l'aide de nanofluides et d'une ailette flexible
Fatima-Zohra KHELIF, Mohamed Habib BENDAOUAD, Meriem TOUMI, Faycal BOUZIT
Influence of Doum Fiber Content on the Mechanical Behavior of Sandy Soils
ID 1335
MEGROUSSE Mohammed, Zerrouki Amina Mounira, Mahmoudi Youcef, Cherif taiba Abdellah
Robust Adaptive Control of DC/DC Converters for Fuel Cell Power Systems
ID 1761
Hicham Mehida
Free vibration behavior angle-ply laminated composite plates
ID 1501
SAHLA Meriem
Comparison of the effect of marble filler and brick filler on the performance of dune sand
ID 676 concrete
kouidri Messaoud, Bendjillali Khadra, Bouziani Tayeb
Enhanced Heat Transfer Using Asteroid-Shaped Tubes in Wavy Bundle Configurations: A
ID 1697 Numerical Study
mohammed FOUAL, youcef becheffer
Heat Transfer Enhancement Using Hypotrochoid Cylinders
ID 1106
Mohammed Foual
Influence of Silt Fractions on the Undrained Behavior of Chlef Sandy Soil
ID 1515
Seyyid-ahmed ZAIRI, Mehdi MISSOUM BENZIANE, Ahmed ARAB
Semi analytical-based simulation to test the validity of a piping erosion experiments in
ID 1752 apermeameter compaction apparatus
Nourelhouda Slimani, Mohammed Amine Boukhemacha
Numerical Thermal Analysis of Cold-Formed Steel Sections
ID 1251
Sarra Taibi, Kada Abdelhak, Lamri Belkacem, hassoune mohammed
26
 Valorization of graphite waste from drilling in the epoxy matrix
ID 671
HIJAZ Tarik Khaled, ARIBI Chouaib, KENNOUCHE Salim
Experimental characterization of stabilized earth bricks: Correlation between type of binder
ID 1347 and physical properties
Sabah Touahria
Conception de matériaux de coupe en alliages durs par insertion
ID 606
Walid BENDJEDDOU, Salim KADRI, Abdelaziz Mahmoud Bouchelaghem
Modelling the Thermal Performance of Steel Bolted Braced Connections in Fire Scenarios
ID 1403
Ouissam Yessad, Abdelhak Kada, Balekacem Lamri
Intelligence Controller Design for Civil Engineering Structural Control
ID 1860
Leyla Fali, Khaled Zizouni , Brahim Mebari and Mohamed Djermane
Impact de la Déformation par Cisaillement sur les Caractéristiques Post-Flambage des Poutres
ID 1861 en Matériaux Fonctionnellement Gradués.
Ali Abbache, Rachid Rabehi and Hichem Berkak

Evaluation of the Integration of Natural Fibers in the Design of a Sandwich Pipeline under
Cyclic Internal Pressure
ID 1862
Ghania HABBAR, Abdelkader HOCINE, Abd Elhamid GHOUAOULA, Abdelkader LOUZA,
Abdelhakim MAIZIA

10:00– 14:00 Online Session | wednesday, April 11th, 2025

Room 1 |Nanomaterials | meet.google.com/tjx-kzpt-dqi
Online Session Chairs:
Enhancement in structural, and optical properties of sprayed In2O3 thin films using ultrasonic
spray.
ID 370
Ranida Bourhefir, Hanane Saidi, abdellah attaf, okba ben khetta, amina youcef, rania toumi,
nour elhouda djheiche
Solvothermal Synthesis and Structural Characterization of Pure and Cobalt-Doped Fe₃O₄
ID 375 Nanoparticles
Esma Aliouat, Nada Belmokhi, Besma Mihoubi, Nahman Boukheit
Influence of the pore Wall polarity in structure and dynamic of water in mesoporous silica
ID 406
nadia FEKKAR
‫ المصنعة بالترسيب الكهربائي‬Ni-TiO2-Al2O3 ‫ على خصائص الطالءات المركبة من‬Al2O3 ‫تأثير حجم مسحوق‬
ID 412
‫بسمة بن حورية‬
Effect of Tin on the Properties of Gallium Oxide Thin Films Prepared via the Sol-Gel Method.
ID 420
Fatma Amraoui, Noureddine Sengouga
Transparent β-Ga2O3 Thin Films Deposited by Spin-Coating
ID 429
lobna messeddek, Noureddine Sengouga, Louiza Arab, Fatma Amraoui
Optical Properties and Biosensing Applications of Core@Shell Nanoparticles: New Analytical
ID 442 Model
Adil Bouhadiche
A highly sensitive voltametric detection of uric acid using CoFe2O4/glassy carbon
ID 453 modified electrode .
DJERAFA MOUSSA, Azizi yasser
Tailoring the Dynamic Magnetic Response of Surface-Engineered Magnetite Nanoparticles for
ID 496 Hyperthermia
AYACHI Ahmed Abdelhakim, HAFIRASSOU Anissa Zohra
ID 504 Study of Adsorption Behavior of cationic Dye on metallic-Modified Activated Carbon: Kinetic

27
 and Thermodynamic Approaches
termoul mourad, Chemrak Mohammed Amin, Attouti Salima, Benderdouche Nouredine,
Bestani Benaouda
Characterization of Chrome Doping Effects in Sol-Gel Synthesized Alumina Powder
ID 516
Hamza HARA, Rassim YOUNES, Mikhael ALYMOV, Mohand Amokrane BRADAI
Green synthesis of silver nanoparticles using mixed plant extract: characterization, antioxidant,
ID 540 antimicrobial and effect on virulence factors of Candida
sid ali Zaidi, naima saidene, Radia Kadi, Taous Kaddour, Kenza Moulaoui
COPPER AND PALLADIUM LOADED POLYOL DENDRIMER–CLAY AS POTENTIAL
ID 561 ADSORBENTS FOR CO2 AND H2
Rachida OUARGLI SAKER
Advanced Evaluation of Inhibition Zones in Co-Doped SiO₂ Nanostructures for Antimicrobial
ID 614 Applications
Nadia Hadjila, Faiza Hadji, Asma Sadaoui
Green Synthesis and Characterization of Pure CuO Nanoparticles Using a Blend of Agricultural
ID 640 Wastes
Aya Bouaziz, Naima Gherbi
Auto combustion synthesis of Alumina nanoparticules (alpha & gama)
ID 667
Billel Zahaf, Mohamed Cherif Makhloufi, Sara Bendas
Temperature Dependence and Performance Characteristics of SiPMs Photodetectors.
ID 669
Faiza HADJI, Ali BENOUADAH, Bouzid BOUSSAHA
Investigation of the anti-corrosion properties of an electrochemically deposited nickel coating
using electrochemical techniques combining X-ray spectroscopy (XPS) and atomic force
ID 692 microscopy (AFM) in a saline environment
Hanene RAMDANE, Noureddine Benaioun, Noureddine Hakiki, Sadek Kadari, SidAhmed
Benseghier, Nasreddine Moulayat
Nanoengineering Lignin for Sustainable Material Innovation
ID 711
Zineb Laali, Rihab Boushaba, Khatima Kaabeche-Djerafi
Electrical and Optical Simulation of OLED with Fluorescent Dopant
ID 802 Samira Mehdi

Optoelectronics properties of the semiconductor ZnGeAs2 applied to photovoltaic cells

ID 482
kerroum djamel eddine, Djebbour Ben ali, Bouafia Hamza, Hiadsi Said
L'anodisation électrochimique est utilisée pour étudier et développer des nanotubes de TiO2.
ID 378
Nihad Nouadri
Synthesis, Characterization, and Applications of Nanomaterials in Adsorption and Catalysis
ID 379
Dehbi Atallah, Benchikh Imene, Dif Dif Mustapha Mahmoud
Formulation and optimization of Paclitaxel Loaded N-octyl, O-phosphate
ID 392 Chitosan Polymeric Micelles
fatima zohra badaoui
Nanomaterials: Green Synthesis and Characterization of Zinc Oxide Nanoparticles Using
ID 400 Green Tea Extract
BENCHIKH Imen, DEHBI Atallah
Biomimetic Fluorapatite from Eggshell Waste: Toward Bone Regeneration Applications
ID 415
Mouna BENBOUDA
Effects of Drying Temperature on Structural and Optical Properties of β-Ga2O3 Thin Films.
ID 426
lobna messeddek, Louiza Arab, Nouredine Sengouga, Fatma Amraoui, rima cherroun
Impact of Dual doping on the structural and electronic properties of Gahnite nanoparticles
ID 436
Nada Belmokhi, Esma Aliouat, Besma Mihoubi, Ahcene Karaali
mechanical performance and durability analysis of sand concrete modified with nano-silica
ID 447
Hachem Chaib, Ali Kechired
Ambient-Temperature Reduction of Cu(II) Ions Using Sodium Ascorbate: Formation,
Characterization physicochemical, and Potential Application of Eco-Friendly Copper Particles
ID 467
in Water Treatment
Meriem Hamidani, Souad Djerad
28
 Phase Transformation Kinetics in Ni/Si(100) Thin Films
ID 473
Messaouda CHAIBRABI, GAMRA TELLOUCHE
Numerical Investigation of a Square Tube Heat Exchanger Cooling System Using Hybrid
ID 484 Nanofluids
Belkacem AIT TALEB, Adel SAHI, Djamel SADAOUI
Élaboration et caractérisation d'un nanocomposite hybride: oxyde de zinc/poly orthotoluidine
ID 499
Mekkaoui Houria, Bekhemas Kheira
ELABORATION DES BIOCOMPOSITES RENFORCES PAR DES FIBRES NATURELLES
ID 505
Kheira Bekhemmas, Houria Mekkaoui
Synthesis and Characterization of Novel Biocomposite Hydrogel Polymers with Enhanced
ID 604 Thermal stability and Delayed Biodegradability Properties
meriem baziz, samy remita, kameche mostefa
The Effect of Precursor sources on the Properties of CuO Thin Films Deposited by Spray
ID 605 Pneumatic method
BEN MESSAOUD Ouarda, OUAHAB Abdelouahab
The Effect of Precursor sources on the Properties of CuO Thin Films Deposited by Spray
ID 607 Pneumatic method
BEN MESSAOUD Ouarda, OUAHAB Abdelouahab
Python-assisted analysis of the properties of spin-coated transparent Sn and Al-doped ZnO
ID 617 thin films
Amel Bakhouche, Sara Boutout
Characterization of Cu2SnSe3 thin films for photovoltaic applications
ID 628
Hadjer REKKACHE
Green synthesis of magnesium oxide nanomaterial using plant extract, optimization of
ID 654 synthesis operating conditions
Bouchra BOUNAB, Nacéra ZABAT, Imene ZITOUNI
Thermogravimetric and specific surface area characterization of synthesized graphene oxide
ID 659
Sabrina Bouriche, Mourad Makhlouf, Mohamed Kadari, Zoubir Benmaamar
Synthèse thermique et caractérisation de deux nouveaux nanomatériaux carbonés, le tGO
ID 679 oxydé et le trGO réduit
kawtar BENTEDLAOUTI
Green-Synthesized Silver Nanoparticles: Synthesis, Advanced Characterization, and Functional
ID 710 Attributes
Sarra Sebti, Badra Barhouchi
Yeasts as sustainable agents for nanoparticles synthesis: Opportunities in green
ID 731 nanotechnology.
Kaouthar Houiti, Smail Mehda, Pietro Buzzini
Contribution à l’analyse du flambement des nano-poutres reposant sur une fondation
élastique avec des conditions aux limites arbitraires
ID 735
Aicha Remil, Ahmed Bouamoud, Meriem Sahla, Mohamed-Ouejdi BelarbI, Mohammed Sid
Ahmed Houari, Ahmed Amine Daikh
Free vibration of a porous (Polymer-carbon nanotube) beam resting on Kerr elastic
foundation
ID 759
Hacini Khedidja, Selmoune Belkasem, Zidour Mohamed, semmah abdelwahed, Bousahla
Abdelmoumen Anis
CHARACTERIZATION OF OPTICAL AND STRUCTURAL PROPERTIES OF SPRAYED PURE
ID 782 AND Sm-DOPED NiO THIN FILMS
Hadil Kaibeche
Biosourced titanium dioxide nanomaterials for sustainable wastewater treatment processes
ID 820
Imene Zitouni, Bouchra Bounab, nacera Zabat
Impact des nanoparticules de dioxyde de titane (TiO₂) sur les propriétés structurales des
ID 821 nanocomposites à base de LDPE
DERBIL SAMIA
Development of Keratin Biocomposite Films Incorporating Silver Nanoparticles for Humidity
ID 826
Sensing.
29
 hayat Hammouche
Nanocomposites of 2Aminophenyl disulfide with Aniline using Cr2O3: synthesis,
ID 829 characterization and electrochemical studies
sarah benyakhou
Enhanced Cancer Cells Sensor with Symmetrical 1D Photonic Crystal
ID 830 Rami Zegadi, , Mohamed Lamine Bouknia, Yamina Tighilt, Sarra Khacha, Nor-elhouda
Mehenni, Djamel Sayad, CHAMESEDDINE ZEBIRI
sol-gel synthesis of Bi₄O₇-Bi₂O₃ nanoparticles
ID 864
wissam bouchal, djani faiçal, chaker laiadi, djamel eddine mazouzi
Free vibration of multi-directional functionally graded metal foam cylindrical nanoshells
ID 874
NADJI Loubna, DAIKH Ahmed Amine, DRAI Ahmed
XRD Analysis of Zn Doped CuO Nanoparticles for Photocatalytic Applications
ID 879
ABBAS FOUZIA, Attaf Sonia, Zaibet Asma
Development and characterization of a PVA/CMC/starch nanocomposite film doped with
ID 892 ZnO nanoparticles, environmental application
Hadjer ADDOU, radja MEGHERBI, Mohamed KARMAOUI, Fadhila BOUHELLA
Ab initio study of GdCo5 Nanomaterials structural and electronic properties
ID 912
djabri amina, Chemam Fayçal
Analyse vibratoire un rotor rigide supporte par un amortisseur hydrostatique avec lubrification
ID 922 magnetorheologique.Belgacem Souad*1
Belgacem Souad
Effect of Pore Size in Porous Silicon on the Efficiency of Solar Cells
ID 927
Samira OUSSIDHOUM, Hand OUELMOKHTAR, Saliha RABEHI, Zaina AITCHEKDHIDH
Synthèse, Caractérisation et Applications des Nanobiomatériauxdans le Domaine
ID 937 Agroalimentaire : Une Revue Complète
Mohamed El Khallil BOUZID, ZEMMOURI Hassiba, BOUDERDARA Nabila
Title: …………………….
ID 940
djamel eddine semsoum, mohamed sadoun
nano-materials
ID 959
Mahfoud Berkani, Berkani Mahfoud
Study of the development of ZnO nanomaterials used via sol-gel methods
ID 960 mounir rouabah, Abdelghani Khaldi, Khalladi Mouhamed Rida, Ziani Issam, Bouras Loubna,
Grine Madani
ID 1830 Optimizing PV Energy in Photovoltaic Systems Integrated with Lithium-Ion Battery Storage
Ben Si Ali Nadia
ID 1776 Assessment of Various Performances of Concrete Incorporatin Ground Dune Sand as a
Replacement Material & quot
LADJEL Mohamed
ID 1838 Effect of suface mechanical attrition treatment (SMAT) on the thermomechanical behavior of
NiTi Shape Memory alloy
Assia gasmi
ID 1839 Engineering propertiesof soils and rocks for the tagharist dam project, yabous (Khenchela
Province)
Haythem Dinar
ID 1777 X-ray diffraction line profile analwsis of Al-Cu thin films.
S. Lallouche
ID 1780 Low dimensional behavior of normal and anomalous densities for
homogeneous Bose gases at finite temperature
Mehedi atika
ID 1811 Elastic Modeling of a Nanobeam
Ould youcef Djamal
1807 Green Routes to ZnO Nanoparticles: Toward Sustainable Photocatalysis
Nesrine AMARI*a, Manel ICHRA a, Nadia GUETTAÏ a, Hafsa BOURAY a
ID 1798 Torsional Impact on Penny-Shaped Crack in Half-Space Elastic Material

30
 Loukmane Zeddam , Abdelkader Kirad and Fateh Madani
sol-gel synthesis and characterization of iron-doped zinc oxide (ZnO-Fe) nanopowders
ID 981
SALIHA RABEHI
Synthèse, et Activité Antibactérienne des 1,3,4-oxadiazole dérivés d'hydrazide d'acide
salicylique.
ID 988
Khaled Briki, Mouna Souad Abbassi, Talal Lahreche, Mokhtar Boualem Lahrech, Adil Ali
Othman, Ahmed Mohamed Elissawy, Abdel Nasser B. Singab
Synthèse 1,3,4-oxadiazole dérivés d'acide benzoïque: Caractérisation et activité antioxydante.
ID 990 Mouna souad Abbassi, Khaled Briki, Talal Lahreche, Mokhtar Boualem Lahrech, Adil Ali
Othman, Ahmed Mohamed Elissawy, Abdel Nasser Badawi Singab
structural and physical properties of Al1- xMox thin films grown by magnetron sputtering:
ID 993 influence of thermal annealing
asma mosbah
Ball Milling Development of an Fe-B-P Ternary Alloy
ID 999
SABAH BAARA, Locif Redouani
The impact of substrate temperature on CO3O4 thin-film structural characteristics.
ID 1003
Bali Khadidja, BEGGAS Azzeddine, Labbi , Labbi Asma, Mammi Mounira
Enhancement of electrical conductivity of polymer nanocomposites using graphene sheets
ID 1034
Amina Midoun
Natural Silica Utilization for Silicon Production in Photovoltaic Energy Systems: An
ID 1071 Experimental Approach
ASMAA ZEBOUDJ, SAAD Hamzaoui, MOHAMED adnane
Nitinol for Biomedical Use: Structure and Electrochemical Behavior
ID 1096
Nabila Bouchareb, Mamoun Fellah, Naouel Hezil, Imen Rim
Enhanced Thermal, Optical, and Antibacterial Properties of Bio-TiO2/PEG/PLA
ID 1101 Nanocomposites
Tassadit Benkacem, Soumia Guerziz, salim hammani
The effect of Mg on the structural and optical properties of Zn1-xMgxO for Ultraviolet
ID 1163 Photodetector Applications
fatima zohra aouacheria, Azzedine Telia
Impact of Nanostructuring on the Magnetocaloric Behavior of NiMnSn-Based Heusler Alloys
ID 1172
Lahcene Ghouari, Abdnnour El Mohri, Karima Dadda
Adsorption kenetic of methylene blue using nanocomposite
ID 1192
guettai hakima, ROUANE Abderrahmane, sebti houari, Sebba Fatima Zohra
Interface Contributions to the Rashba Effect in an Asymmetric GaAs/AlGaAs Double Quantum
ID 1206 Well
Loubna Melaab, Saadi Lamari
Elaboration de Carbon Quantum Dots pour Applications Photovoltaïques : optimisation et
ID 1222 caractérisation.
LOUBNA Amri
Optimisation de l’Encapsulant des Modules Photovoltaiques par Analyse Enthalpique
ID 1224 Différentielle.
FAIZ Ilhem
Structural Evolution and Magnetic Behavior of Mechanically Alloyed FeS2 Nanocrystalline
ID 1246 Powders
Naouam BOUDINAR, Nawel NEDJAH, Abdelmalik DJEKOUN
Synthesis and Characterization of CuO/TiO2 Thin Films
ID 1255
Meriem Boudiar, faouzi hanini
Synthesis, characterization and photocatalytic application of co-doped and non-doped
ID 1269 CaTiO3 nanoparticles by sol-gel method.
FILALI Hichem, BOUHROUM Rafika, BELMOKHI Nada
Etude et synthèse des films de Cu2NiSnS4 pour les applications photocatalytiques
ID 1286 MEDINA SOUAD, Nezzari Asma, Nebatti Abdelkader, Amrani Bouhaloune, Driss-khodja
kouider
ID 1306 Effect of Zn-doped CuO thin films on structural,and optical properties
31
 BENOTMANE Khouloud
Characterization of biomaterial based plasticized GGM films
ID 1363
Nacera Benouadah, Andrey V. Pranovich, Fetta Aissat
Valorization of Algerian dolomite
ID 1379
Chafia Bouchekrit, Mustapha Kolli, Mahmut Altiner
New Rare Earth mixed oxides Perovskite type for surface and Water treatment
ID 1384
Mohamed Anis SILAKHAL, Khadoudj GUESSOUM
Electrochemical properties of La1-xSrxMnO3 for solide oxide fuel celles (SOFC)
ID 1388
Ranya BOUFENCHOUCHE, Yazid BOUDJADJA, Meriem MEKIMAH
Controlled Formation of Nanostructured Ni-Co-Mo Alloys via Mechanical Alloying: A
ID 1410 Structural Insight
Hadjira Rafai, Billel Smili
Effect of doping by Y3+ and Al3+ on structural properties of Ce0.85 Y0.15 Alx O2−δ
ID 1427 electrolyte material for SOFC
Meriem Mekimah, Abdelmalek Saoudel, Ranya Boufenchouche
Green Synthesis of α-Fe2O3 Nanoparticles for Efficient Removal of Heavy Metals from
ID 1526 Petrochemical Wastewater
Abderrhmane Bouafia, Bachir Gherbi, Henda Daoudi, Souhaila Meneceur
Eco-Friendly CuO Nanoparticles for Effective Heavy Metal and Hydrocarbon Removal from
ID 1534 Petrochemical Wastewater
Bachir Gherbi, Abderrhmane Bouafia, Souhaila Meneceur
Electrochemical properties of La1-xSrxMnO3 for solide oxide fuel celles (SOFC)
ID 1536
Ranya BOUFENCHOUCHE, yazid BOUDJADJA, Meriem MEKIMAH
Eco-Friendly Synthesis and Multifunctional Properties of Mn-Doped NiO Nanoparticles for
ID 1551 Magneto-Optoelectronic Applications
Abdelmalik ZEMIECHE
Ultrasound-Assisted Synthesis and Characterization of Nickel Hydroxide Nanomaterials
ID 1570
Ghania DEKKICHE, Abdelkader BENABDELLAH, Noureddine HARID
Impact of Zinc Oxide Nanoparticles on Mineral Oil Impedance in Power Transformers: A Pre-
and Post-Enhancement Analysis
ID 1619
ABDERRACHID BERRAH, abderrahime reffas, Hocine MOULAI, Abderazak BENNIA, hicham
talhaoui, makhloufia AMARA
Effect of Deposition Cycle Number on the Photocatalytic Performance of ZnO Thin films
ID 1645
Abla BORDJI, Faiçal Bensouici, Selwa KEBAILI
Effect of Salt Precursors on the Optical and Structural Characteristics of Copper Oxide
ID 1658 Synthesized via the Sol-Gel Method
Roumaissa Malim
Temperature-Dependent Phase Evolution and Optical Properties of Al₂O₃- and In₂O₃-Doped
ID 1659 ZnO Nanocomposites: Crystallization Inhibition versus Spinel Formation
AICHA AYADI, FERIAL BENMAAMAR, LYES MAIFI
Numerical study to improve the performance of InGaN Single Junction Solar Cells
ID 1665 Amine Hadjouni, Akkal Boudali, Arslane Hatem. Kacha, Zineb Benamara, Mekki Abdelkader
Benamara
Title
ID 1712
hamza bouakraz
Substrate Heating Temperature effect on Microstructural and Photocatalytic Ceria Thin Films
ID 1759 Synthetized by Spray Pyrolysis Method
Sabrina IAICHE, Soumia TOUAM

32
10:00– 14:00 Online Session | wednesday, April 11th, 2025
Room 2 | Materials and Environment |meet.google.com/gyb-exic-qyy
Online Session Chairs:
Use Of An Eco-Friendly Biosorbent For The Treatment Of Water Polluted By Methylrosaniline
ID 371 Chloride: Experimentation And Modelling
Imane KEZRANE, Toufik CHAABANE
Preparation de charbon actif a la different concentrations de l'acide phosphorique
ID 384
SERAA Hicham, BELKHIRI Daouia
Enhancement Properties of Poly (3-Hydroxybutyrate‐Co‐3 Hydroxyvalerate) (PHBV)/Polylactide
(PLA) Blends and Composites
ID 386
Brahim REMILA, Idris ZEMBOUAI, Lynda ZAIDI, Kattia YALAOUI, Mustapha KACI, Antoine
KERVOELEN, Stéphane BRUZAUD
Effective uptake of Evans blue in aqueous solution using layered double hydroxide and its calcined
ID 396 material.
Hassiba BESSAHA, Kheira EL AKEB, Mohamed BOURAADA
Valorization of a natural clay for the elimination of an organic pollutant from pesticides: Study of
ID 408 adsorption performance
hadjer bousemat, Samira Ziane-Hezil, Halima Delali
Eco-Friendly Inhibition of Carbon Steel Corrosion by Plant Leaf Extracts in 1 M Hydrochloric
ID 409 Acid: Experimental Validation
Lynda Abdelli, Mlaika Nouadji, Saida Marmi
Propolis as a Multifunctional Bio-Inhibitor: Food Preservation, Metal Protection, and
ID 417 Environmental Care
Amel Serhane, Hakim Bensabra
Evaluating reuse of cement kiln dust as coagulant for wastewater treatment
ID 421
nadia ramdani
Development of environmentally-friendly materials
ID 451
DAOUDI CHAHRAZED
Extraction and Characterization of a Marine-Derived Polysaccharide and Evaluation of Its
ID 459 Antibacterial Activity.
Radhia Elong, Mahmoud Belalia, Louiza Belkacemi
Green extraction and process optimization for the recovery of bioactive phenolics from olive by-
products
ID 472
Taous KADDOUR, Nassima CHAHER-BAZIZI, Naima SAIDENE, Lamia HANIFI, Nabil DRIS, Lydia
KAROU, Rdia KADI, Atia AMINA, Mostapha Bachir Bey
Experimental study of the physical properties of Stabilized Earth Blocks (SEB)
ID 485 MOULAY ALI Abderrahmane, IDDER Abdelghani, FRIH Ahmed, BOUTADARA Youcef, BASSOUD
Abdelkader, KHELAFI Hamid
Evaluation of the Thermal Performance of a Sandwich Panel Incorporating a Bio-Based Insulation
ID 521 Material
hamza zitouni, Amel boudjabi, lila remache
STUDY OF THE ADSORPTION OF ORGANIC DYES ON pH-SENSITIVE HYDROGELS
ID 554 BASED ON AGAR-G-POLY-AA-CO-AMPS
Salima HOCINE, Mohamed Zighed, Foudil Bounchache, Faiza Aiche, Naima GHEMMIT
Traitement des eaux usées par ozonolyse catalysé par des matériaux mésoporeux et microporeux
ID 562
Rachida OUARGLI SAKER
Automated inspection of steel defects using cloud-based deep learning model
ID 624
BENAZZOUZ Younes
New use for organohalloysite for ciprofloxacin removal
ID 627
Amine AMAR
Geometric Alterations in Cu2ZnGexSn1−xS4 Due to Germanium Incorporation
ID 681
Mohamed Issam ZIANE, Hamza BENNACER, Moufdi HADJAB
Etude de phénomène d’adsorption de l’acide Orange 7 (AO7) sur le marc de raisin activé par
H3PO4
ID 697
Sarra BOURAHLA, Hanane BELAYACHI, Kawther Nesrine BENKHEMKHEM, Abir BENHADDA,
Fadela NEMCHI, Mostefa BELHAKEM

33
 Effect of cathodic materials on the degradation of organic pollutants on the efficiency of photo
ID 698 Electro Fenton processes
Fadoua Kerrouche, Salaheddine Aoudj, Nadjib Drouiche
Using gravimetric analysis and thermodynamic calculations to evaluate the efficiency of Asteraceae
ID 699 extract as an environmentally friendly corrosion inhibitor for mild steel in acidic environments.
Sirid Remache, Adlene Benyamina, Merzoug Benahmed, Ayache Boultif
Effect of the Use of Sewage Sludge Ash on the Compression Strength of Gypsum Sand
ID 729
Ahmed Amine Meraghni, Abderrezak KHELLOU
Effect of the Use of Sewage Sludge Ash on the Water Sensitivity of Gypsum Sand
ID 774
Ahmed Amine Meraghni, Abderrezak KHELLOU
Modeling hexavalent chromium adsorption using an innovative waste product, sunflower seed
ID 801 shells, in dynamic mode.
Amina LAHMAR, Zhour HATTAB
Valorization of PVC Waste in Plaster-Based Composite Materials
ID 808 Farid Brahim HOUTI, AhmedSoufiane BENOSMAN, Mohamed MOULI, Omar TALEB, Imen Fatema
Zohra MESLI, Baghdad Adel ZOUGHAR
Development of an enzymatic electrochemical sensor for the selective detection of catechol in
ID 878 aqueous environments
Faiza Bouhebila, Ali Zazoua, Sarra Fafa, Rabiaa Helim, Noureddine Raouafi
Effects of Dune Sand on Rutting and Void Content of Bituminous Mixtures
ID 883
SACI Ahmed
Machine Learning-Assisted Green Synthesis of CuO Nanoparticles for Enhanced Photocatalytic
ID 888 Activity
Reguia BOUDRAA, Hichem Tahraoui, Amira Saidani
Démonstration des propriétés mécaniques et optiques de la double pérovskite Pb2FeMoO6 en
ID 930 utilisant le premier principe
smain bendaoudia
Synthesis of an iron-succinate coordination polymer and its visible-solar-light-driven photocatalytic
ID 942 degradation of pharmaceutical pollutant
Ferfeche Lynda, Debbache Nadra
ID Adsorption of dyes by an activated carbon: Characterization study
1104 Djihad Telhas, Ines Hamdi, Khadidja Bouzid
ID CINNAMON EXTRACT AS GREEN CORROSION INHIBITOR FOR MILD STEEL IN 1M HCl
1204 Nora BENTERKI, Saida Marmi, Hayat Marmi, Malika Nouadji, Chahinez Siad, Abdelouahad Chala
Étude Comparative de la Photodégradation d’un colorant organique sous Irradiations Solaire et
ID
Artificielle en Présence de Couches Minces Élaborées par la Technique Dip Coating
1314
Manel Sellam, soulef Azizi, Dikra BOURAS, Mamoun FELLAH
Étude Comparative De l’Influence De La Concentration En Nickel (3 % Et 5 %) Sur Les Propriétés
ID
Photocatalytiques Des Oxydes Métalliques Pour La Dégradation Du Bleu De Méthylène
1348
Manel Sellam, Dikra Bouras, Mamoun Fellah
The Role of Permeable Pavement as a WSUD Technology in Building Urban Resilience and
ID
Mitigating Flood Risks
1364
Rania GHRIEB, Meryem BELADJILA, Atef AHRIZ, Aissa GRIB
Vers des hydrogels intelligents pour l'élimination des colorants : étude de l'influence du photo-
ID
initiateur sur l'adsorption
1386
Manel Safia Chouikhi, Salah Hamri, Zakia HADJOU BELAID, Fayçal DERGAL, Djahida LERARI
Sustainable Compacted Geopolymer Production Using Phosphate Waste Sludge and Natural Clay
ID
Maher Issa, Slavka Andrejkovičová, Marwa Zribi, Daniela Řimnáčová, Mónica S. A. Oliveira, Helena
1496
Pálková, Fernando Rocha, Samir Baklouti
Removal of 4-Chlorophenol from Aqueous Solutions Using prepared activated Carbon: Adsorption,
ID
Isotherms, and DFT Analysis
1675
Salima ATTOUTI, Mourad TERMOUL, Benaouda BESTANI, Nouredine Benderdouche
ID Maghnite-H+ catalytic synthesis and characterization of Polyindenes and oxidized
1787 derivatives.
mohamed marref
ID
1788 Morphology, Structure of polyvinyl chloride (PVC) nanocomposites with optimized thermal and

34
 optical properties. Materials synthesis and
mohamed marref
ID Production and characterization of composite coatings on steel
1789 Mouna Rekaik
ID Reliability Evaluation of Portal Frames Considering Soil Variability and Interaction
1790
A.E. Remadna
ID Study and simulation of a hybrid PV/ Battery system with a load
1791 Elhadj RAHMA
ID Influence de température de trempe sur les caractéristique d’un matériau à haute
1792 résistance : 42CrMo4
D. EMBAREK
ID Modélisation numérique des poutres en béton armé renforcées en flexion par matériaux
1793 composites
Hamidi kawther
ID One-dimensional modeling of a low-pressure radiofrequency discharge
1794
Elhadj Habel
ID Title: Study and simulation of a hybrid PV/ Battery system with a load
1795 Elhadj RAHMA
ID Synthesis of alginate-chitosan polyelectrolyte complex (PEC) biomaterial and their
1799 potential applications in biomedical
Mohammed DELLALI , Kheira ZANOUNE and Marcel POPA
ID Development of polymeric microparticls loaded with the anti-inflamatory drug delivery
1800 Kheira ZANOUNE , Mohammed DELLALI , Delia Mihaela Rata, Marcel POPA
ID Bending Analysis of 3D Softcore Porous Metal Foam Shells Using a Refined High-order
1801 Finite Element Approach
Soufiane Benounas, Salah Guettala, Akram Khelaifia
Epitaxial Formation of Calcite Crystals with use Isonicotinic Acid (INA) As Templates
ID 372
Hassiba TIGHIDET, Kahina AOUDIA, Nabila CHERCHOUR, Naima BRINIS
analyse des performances mécaniques des biocomposites à base de fibres végétales
ID 416
Besma Randa BAALI, Abdelkader NOUR
TD-DFT design of a new series of TADF compounds for organic LEDs
ID 435
Lamia KARA ZAITRI
Mathematical Modeling and Experimental Study of Hg(II) Removal on Bio-Based Activated
Carbon
ID 437
Mohammed Amin CHEMRAK, Mokhtar Benzekri Benallou, Halima Dellali, Mohamed Loucif,
Benaouda Bestani, Noureddine Benderdouche
Investigation of the electrical, optical, and thermoelectric characteristics of vacancy-ordered double
ID 449 perovskite K₂SnBr₆ using DFT method.
Afifa Zikem, Hakim Baaziz, Torkia Ghellab, Zoulikha Charifi
Domestic Sewage Treatment Of Arid Environments By Filters Planted With Scirpus
ID 456
Youcef sara, Seghairi Nora
……….
ID 471
Mohamed Yagoub
ID La dépollution de l’eau contaminée par le vert de malachite par le procédé d’électrocoagulation
1723 Nadjah Maghraoui
Optimization of bending performance of GFRP waste-based sandwich members with genetic
ID 478 algorithm
Abdelmadjid Si Salem, Mohammed Meddour, Souad Ait Taleb
Valorization of Chitin-Rich Squid Gladius Waste for Cationic Dye Adsorption: Isotherm Modeling
ID 493 and RSM Optimization
Assia Bensedjad, Fouzia Ouazani, Meriem Bouanani
ID 500 OPTIMIZATION OF THE USE RATE OF UNCOOKED CLINKER IN THE CEMENT
35
 MANUFACTURING IN ALGERIA
Batouche Toufik, Tabet Abdelhak, ZERZOUR Oussama, Dinar Haythem, ROUAIGUIA Issam,
CHEIKHAOUI Youcef
Bending and free vibration analysis of functionally graded plates using five variable refined plate
ID 507 theory
Mohammed Yahiaoui, Ali Meftah, Issam Terki Hassaine
In Vtro Protein Denaturation Potential of Total Alkaloids Extracted from a Desert Medicinal Plant:
ID 514 Wild Plant of El oued Region Algeria
AYACHI Mohammed Laid, MEKHELFI Tarak, REBIAI Abdelkerim
Influence of the incorporation of sand from clinker and ceramic waste on the properties of fibre
ID 523 sand concretes.
Mohamed Lazhar DANI
Environmental Remediation: Biomass for Efficient Heavy Metal Removal
ID 527 ZOUBIDA KOUROULOU, Mahmoud BELALIA, Fouad Fouad MEKHALEF BENHAFSA, Fatima
Zohra BELKACEM, Halima DELALI, Asmae BENABBOU
Performance of Self-Compacting Concrete Incorporating Marble Powder in Binary and Ternary
ID 533 Mix Designs.
Hind SALLAI, Nasr-Eddine Bouhamou
APPROACHES TO PROTECTED THE CONCRETE WORKS IN AGRESSIFS AREAS – CASE
ID 557 OF OUARGLAW
Wafa BOUAKA, Mohamed Brahim HACHANI, Tahar TIOUA, Mehdi SEGHIRI
Ecological footprint of the use of polymers in mining industry.
ID 598
BENDOUMA SABRINA
Efficient Purification of Natural Crystalline Silica via Acid Leaching for High-Purity
ID 620 Semiconductor materials and Advanced Applications
Saida HAOULI, Samiha MEZRAG
The influence of a biocompatible inhibitor on the corrosion processes of copper within an acidic
ID 623 environment.
Lahag Lemya, Guettaf Temam elhachemi, Ben.Temam hachemi
Thermal Characterization and Fire Resistance Assessment of Natural Algerian Plant
ID 630
Fatima Zohra Krim
Development of a Wildland Fuel Propagation Index
ID 631
Fatima Zohra Krim
Efficiency of Copper Schiff Base Complexes in the Photodegradation of organic Dyes
Soumia BOULEFRED, Fatema Zohra CHIBOUB FELLAH, Abdelghani CHIBOUB FELLAH, Racha
ID 648
Medjda Bouchenak Khelladi, Mohammed Reda Ramdani, adhya-eddine hamitouche, Khaldoun
BACHARI
Numerical FEM-based Prediction of the Bending and Shear Behavior of Functionally Graded
ID 651 Beams
FERHAT Soraya, Aghiles NEKMOUCHE, SI SALEM Abdelmadjid, Souad AIT TALEB
Reducing of copper ions by eco-friendly material.
ID 655
Fatiha Boumediene
Cream tartar Recovery using précipitation process
ID 658
Samira KHERICI, Djillali BENOUALI, Naedjess NEMMICHE
Impact of Unused Cutting Oil Contamination on Soil pH and Electrical Conductivity
ID 666
Asma Boutaghane
Interactions hydrophiles et biocomposites multiéchelles
ID 670
Siham BENNACER, Noura HAMOUR, Amel MENICHE
Valorisation de déchets végétaux pour l’adsorption du colorant rouge basique
ID 680
Rayane Mehennaoui, Soraya Merzouki, Salah Neghmouche Nacer, Fadila Louafi
Extraction liquide-liquide de polluant métallique cuivre (II) par La N, N'-bis(salicylidène)
diéthylènetriamine, dite H2saldien dans le mélange chloroforme-eau, en milieux sulfate et chlorure,
ID 691
en absence et en présence des tensioactifs ioniques SDS et CTAB.
Souhila BELHOCINE
Ingénierie de la bande interdite et amélioration photocatalytique dans les nanostructures CuO
ID 702 dopées au Zn pour les applications de traitement de l'eau
Madiha Zerouali, Radouane Daïra, Dikra Bouras, Loumafak Hafaifa, Mamoun Fellah

36
 Strategic plan for Recovery and Valorization of Oil Drill Cuttings: Challenges and Innovative
ID 706 Solutions
Oualid Lounas, Ammar Malek, ARIBI Chouaib
Effectiveness of Reduced Graphene Oxide (RGO) in Removing Nutrient Pollutants from Oued El
ID 715 Kaim Dam Water (Mila, Algeria)
Allia Zineb, Boumessenegh Amel, Zelbah Ikram
Characterization of Phosphate Mine Waste Rocks in the Algerian Phosphate Mining Area (Tébessa,
ID 724 NE Algeria)
Imen LAALA, bouzidi nedjima, Hadjer BOUZERIBA
Towards an Efficient Desulfurization of Diesel: Optimizing the Extraction Stage in Extractive-
ID 745 Oxidative Process
Louiza AICHAOUI, Soraya AIDENE, Boudjema HAMADA
A Comparative Study in the effects of Gasoline and Seawater on GFRP Composite Structures
ID 746
Bouhafara Djaber, Menail Younes, Mesrafet Farouk, Chaoui Kamel
The effects of Seawater and Distilled water on a Carbon C-Orthocryl composite used in orthopedic
ID 750 prosthesis manufacturing
farouk mesrafet, younes menail, djaber bouhafara, kamel chaoui
Efficient and Cost-Effective Membranes for the Removal of Organic and Inorganic Contaminants
ID 766
AOUES Amina
Heterogeneous Photo-Fenton Degradation of Malachite Green Using Maghemite (γ-Fe₂O₃) under
ID 769 UV Irradiation: Toward Efficient and Sustainable Wastewater Treatment.
Nassima Laid, Bouanimba Nour, Ghorab Sarra, Bouafia Safa
Evaluation of Heavy Metal Tolerance in Environmental Bacterial Strains
ID 770
Oumeima BOUFERCHA, Nour el Houda Benlahrache, Allaoueddine Boudemagh
Effet antibactérien des huiles essentielles de deux plantes Pistacia lentiscus et Lavandula
ID 781 angustifolia sur certaines souches bactériennes multirésistantes
AZIZI NASSIMA, ZOUAOUI NASSIM
The influence of zinc acetate and zinc chloride precursors on the properties of ZnO and Sr-doped
ID 785 ZnO thin films synthesized using the SILAR method.
Nourelhouda Mokrani, Elhachmi GHETTAF TEMAM
Le comportement magnétique d'une bicouche VI3
ID 791
Youssef CHEGRANE
Environmental Desulfurization and Zinc Recovery from Mining Waste: Case of the Chaabet el
Hamra Mine
ID 799
Mohamed chouafa, Hamza Azzouz rached, Tabet Trirat, Toufik Batouche, sofiane alirachedi, salah Arif,
saber belheoues
Optimization of Brilliant Green Dye Photodegradation Using TiO₂ Under UV Irradiation via Box-
ID 811 Behnken Design
Sabrina Oulad Brahim, Khedidja Benouis, Marwa Lamise HAMEL
Valorization of a local biosorbent modified by citric acid for the removal of methylene blue from
ID 824 wastewater
Othmane Mezzar, CHIFAA AD, Mebrouk Djedid
Studies on the structure and properties of Epoxy/arundo donax fiber composites
ID 839
fatiha SIAHMED, lotfi faghi
Enhanced Visible-Light Photocatalytic Degradation of Methylene Blue with Copper (II) Oxide:
ID 852 Process Optimization using Box-Behnken Design
Marwa Lamise HAMEL, Khedidja Benouis, Sabrina Oulad Brahim
Effet de sédiments calcinés sur les propriétés mécaniques du béton renforcé de fibres métalliques
ID 891
Bilel Boulakoud
Green synthesis and characterization of natural clay nanoparticles and their use in the removal of
ID 898 azo pollutants.
KHENNAOUI Badis, BATAICHE Insaf
Adsorptive Removal of Safranin O Dye Using Clay-Al-CTAB/Colloidal Silica/PVA Composite films
ID 905 as Adsorbents: Kinetics and Isotherms studies
Leila CHABANE
Sustainable Development: Synthesis of Mesoporous Materials from Plant Biomass for Cadmium
ID 906
Adsorption in Polluted Environments

37
 khelif meriem, bouchenafa saib naima
SYNTHESE ET CARACTERISATION DU ZNO/MCM-41 POUR L’ADSORPTION DU BLEU
ID 918 DE METHYLENE
Habiba FERDJOUNI, Benamar CHEKNANE, Naima BOUCHENAFA-SAIB
Groundwater Quality in a Semi arid region :Tebessa -Algeria
ID 949
SEDRATI NASSIMA, Benmerabet nadia, Halimi Fahima
Rheological Evaluation of Bitumen Modified with Recycled Rubber Powder from End-of-Life Tires
ID 955
Mohamed MELIK, Nabil KEBAILI, Said ABANI
Use Of An Eco-Friendly Biosorbent For The Treatment Of Water Polluted By Methylrosaniline
ID 964 Chloride: Experimentation And Modelling
Imane KEZRANE, Toufik CHAABANE
Green synthesis of Zn/Ag nanoparticles and their high efficiency in degrading organic pollutants
ID 966 and removingMES from industrial wastewater
Daoiya zouied, malika khelfaoui
Development of Biosourced Adsorbents for Industrial Wastewater Remediation: Towards
ID 984 Sustainable and Eco-Friendly Materials Engineering for Pollutant Removal.
Sabrina FARCH
Advancing Polypropylene Recycling: Investigating the Stabilizing Effects of Irganox 1076 on
ID 995 Rheological and Mechanical Properties Across Multiple Cycles
BENMOHAD Khouloud Feryal, AIT CHERIF Ghania, BOUNEKHEL Mahmoud
Producing water from air by cooling with a Peltier-effect electrothermal module, in the Tebessa
ID 997 region (north-east Algeria).
Zouita Nadjoua, Mimeche Leila, Alouani Ahmed Amine
Material Selection Paradigms and Environmental Performance Indicators for Cool Pavement
ID
Infrastructure: Towards Climate-Adaptive Urban Design
1012
Meryem BELADJILA, Rania GHRIEB, Atef Ahriz, Soufiane Fezzai
ID Influence of Date Palm Fibers on the Shrinkage and Cracking Characteristics of Expansive Clay
1021 Afaf Zeroual, Amina MASMOUDI, Ahmed BOUAZIZ, Sadok FEIA, Abdelali DADDA
ID The destructive and non-destructive testing in the evaluation of concrete strength.
1063 RENNANI FATIMA ZAHRA, MAKKANI ABDELKADIR
Dépollution de solutions aqueuses contenant de la rhodamine B à l'aide des feuilles de néflier
ID
modifiées
1065
samia YARIK, kenza BOUAOUINA, fatiha BARKA-BOUAIFEL, nacer BEZZI
ID Two-Phase Extraction of Dye Eosine B Imperial Red Using Non Ionic Surfactant Dehydol LT7
1074 Nacera Ghitri, Hassiba Bouabdesselam, Mostefa Kameche, Zahera Talbi
Etude ab- initio des propriétés structurales, électroniques des composes binaires a base de thallium
ID
( TlB, TlN, TlAs et TlP)
1091
Abed Zoulikha, Abdelali laid
Integrated Assessment of Treated Carob Leaves and Pods as Sustainable Feed Alternatives in
ID
Awassi Sheep Nutrition: Impacts on Performance, Meat Quality, and Environmental Efficiency
1100
Prof. Hajer Ammar
ID Effect of chemical treatment on the tensile properties of alfa fibers.
1109 Rami Benamrane, Mohammed Salah Bennouna
ID Less CO2 , more resistance: when nature reinforces construction
1111 Kattia YALAOUI
ID Role of Lead on Corrosion Resistance of Zn-Pb alloy coating
1136 Safa Benamor, Malika Diafi
ID ADSORPTION OF METHYLENE BLUE BY BITTER ALMOND SHELLS (Prunus amygdalus)
1144 MAZOUZ Ouissam, BOURFIS Nassima, FERHOUM Fatiha
PRODUCTION OF AN ACTIVE ADSORBENT FROM THE SHELL OF WILD BITTER
ID ALMOND (Prunus amygdalus)
1151 Nassima BOURFIS, MAZOUZ Ouissam, FERHOUM Fatiha, BACHOUCHE Nassima, MAHDI
Khadidja, BENSMAIL Souhila, Djaouhra Djamila
ID The removal of Hexavalent chromium (Cr+6) by adsorption on activated carbon.
1171 Sadaoui Loubna, Djebabra sihem, Charif Majda, Akacha Imane
ID Effect of PEG Molecular Weight on the Structural and Rheological Properties of PMMA/Cellulose
1176 Bio-Based Composites

38
 soumia guerziz, Slim HAMMANI, Sihem DAIKHI
ID Mechanical properties of superconducting materials
1179 Nawal Sayoud
Gamma Radiation Shielding Characteristics of a Novel Polyethylene Terephthalate–Aluminum
ID
Oxide Composite
1181
TAKOUA CHAREF, Foued zouai
Buckling analysis of hybrid cross-ply composite laminates on elastic foundation using trigonometric
ID
plate theory
1182
BENSELAMA KHADIDJA
synthesis of hydrogel polymer based on acid polyethylene dimethyl acrilate and spectroscopic study
ID
by IR technic and DRX
1193
rouane abderrahmane, nemiche nardjesse, GUETTAI hakima, SEBBA fatma zohra
ID Dual-Function Polyoxometalate for the Efficient Elimination of Eosin Y from Aqueous Solutions
1215 BALI AICHA, benadji siham, rabia cherifa
STUDY ON THE VALORIZATION OF A BY-PRODUCT OF THE SUGAR INDUSTRY FOR
ID
THE TREATMENT OF WATER LOADED WITH ORTHOPHOSPHATES
1225
HIND SAADI, FATIHA ATMANI, ouafia belamane, ZOHRA bensaadi
Fabrication and Additive Manufacturing of PLA-Based Biocomposites Reinforced with Yucca
ID
Fibers Featuring Improved Thermal and Dynamic Mechanical Properties.
1250
Mohamed Amine Kacem, Moussa Guebailia, Rami Benamrane, Lakhdar Hafsi
ID Life cycle assessment of cement based on dredged sediments
1259 Rachid HADJ SADOK
Catalyseur innovant à base d’oxydes métalliques (Fe/Ti) pour la production d'hydrogène à partir
ID
de l’eau.
1278
LARBAOUI Salima, HENTIT Hafida, ABDELHADI Bentouami, Amel Boudjemaa
ID Removal of Congo red dye by adsorption on activated carbon prepared from pomegranate peel.
1289 RABIA BESSERNI, Djamal Atia
In vitro antioxidant potential of Retama Sphaerocarpa extract and their antibacterial activity
ID
against human pathogens
1311
Hanane SEGHIER, Nassima AZIZI, Hayette BOUABIDA
ID Effect of ceramic waste on UHPC sustainability
1317 Lekoui Mohamed Tahar, Hebhoub Houria, Abdelouahed Assia, Berdoudi Said
Study of the Frequency Response of TORP Middle Ear Prostheses Using the Finite Element
ID
Method
1319
Naili takiyeddine, Sahli Abderahmene, Ghouari lahcen, Benatmane Charaf Eddine
Amélioration de l’Activité Photocatalytique du TiO₂ par Dopage au Nickel (5 %) : Étude de la
ID
Dégradation du Bleu de Méthylène en Milieu Aqueux
1334
Manel Sellam, Soulef Azizi, dikra Bouras, Mamoun Fellah
Effet du traitement thermique sur l’activité photocatalytique du TiO₂ pour la dégradation d’un
ID
colorant synthétique
1356
Manel Sellam, Dikra Bouras, Mamoun Fellah
Reduced Graphene Oxide-Polysulfone/ Sulfonated Polysulfone Composite Membrane for Water
ID
Purification applications
1358
Roquiya LAGHRIB, Abdallah CHERAITIA
The Structural, Mechanical, and Electronic Properties of Ternary bi-alkali Arsenide with
ID
honeycomb Structure: A First‐Principles Prediction
1367
sihem SAIED, Mohamed HALIT, Said MAABED, Mohamed BOUCHNAFA
Degradation of ibuprofen using the Photo-Fenton process
ID
EL HANAFI Nawel, GOUSSMI Nawel, AOUGJIT Farid, ZAABAR Aida, KERNANI Redha, LOUNICI
1380
Hakim
ID Removal of Safranine O dye by coagulation-flocculation using a biocoagulant
1397 Halima Aissaoui, Sihem Arris, Amina Abbaz
ID Elimination of pesticides in aqueous solution by clay matrices
1413 FEDDAL IMENE, Boukehili israa, Mimanne Goussem
ID Développement des bétons bas carbone à base de liants ternaires
1425 Amina BELAIDI, Mohamed BENMAMMAR, Omar TALEB, Amel FLITTI, Riham CHALABI
ID Study on the Combined Effect of Fine Recycled Aggregates and PET Fibers on the Durability of

39
1434 Self-Compacting Concrete
Bayah Meriem, Debieb Farid, Boubakeur Asmaa
First Extraction of Peroxidase from Desert Truffle and Its Application in Decolorizing
ID
Bromophenol Blue Dye
1440
Abdelhafid BOUREMANA, Fatima El-Houaria ZITOUNI-HAOUAR
Toward a Circular Economy: Ecological Department Model for Wastewater Reuse and Biogas
ID
Production
1449
Nardjess Belhadj, Lilia Belhadj, Abdelaziz Bendraoua
Synthesis of new material based on Metal-Organic Framework (MOF) mixed with Layered Double
ID
Hydroxide (LDH) for elimination of organic dye from wastewater
1454
Afoun Meryem, BENNABI Souad, HEDIDI Madani
ID Boosting the Efficiency of Thermoelectric Modules through Strain Engineering
1460 Khadidja Djelid, Taïeb Seddik, Omar Merabiha, Mohammed Batouche
Gestion des Déchets et Recyclage : Solutions pour Réduire la Pollution Liée aux Matériaux et
ID
Optimiser leur Recyclage en Algérie
1464
FATIMA ADJIRI
Formulation and Characterization of PVA-Based Water-Soluble Films for Biodegradable All-in-
ID
One Dishwasher Capsules
1466
Abderahmane Belafriekh
Electrochemical Nanostructured Materials for Sustainable Water Treatment: Case of Atrazine
ID
Removal
1474
Hanene HAMOUS, Javier Fernández, José Bonastre, Aicha KHENIFI, Francisco Cases
Développement Des Matériaux Organiques Dérives De La Rhodanine Pour La Purification De
ID
L’eau : Etude De Synthèse Et D’analyse Structurale
1485
argoub kadda, toubal khaled, benkouide ali mustapha
ID Improved Diclofenac Adsorption: A Mechanistic Approach Using Modified Halloysite
1486 Choulia Latifa HALLOUI, Mounir KHELIFA, Amina MOSTEFAI, Kheira MAROUF, Amine KHELIFA
Investigates the potential of transition metal-doped ZrS₂ monolayers as next-generation materials
ID for advanced chemical sensing applications: A DFT Study
1488 Chayma BOUCHAIR, Amal BOUROUMANA, Selma BOUCHAIR, Abdel-Ghani BOUDJAHEM,
Nedjoua CHEGHIB
ID Greener Concrete: Recycling Seashells and Ceramic Waste for Flowable Sand Concrete
1509 Serine bennabi, Djamila BOUKHELKHAL, Mohamed GUENDOUZ, Loubna Benatallah
corrosion Inhibition of c45 steel in hydrochloric acid medium by an aqueous extract of chamomile
ID
flower
1517
Malika Nouadji, Saida Marmi, Hanane Djouama, Hayat Marmi, Lynda Abdelli, Zineb Hamida
ID Les nouveaux matériaux ferromagnétiques d0 générés par le dopage d'un élément non magnétique .
1520 BEZZINE Karima
ID Assessment of Heavy Metal Distribution and Environmental Impact in Sediments
1530 saaidia samia, BELAIDI ouafa, BEKAKRIA Hamida, BENREDJEM Zahia
ID Study of the degradation of methylene blue by electro-oxidation on a PbO₂ electrode
1538 Belaidi Ouafa, Saaidia Samia, BEKAKRIA Hamida, Benredjem Zahia
ID Performance of self-compacting concrete made with recycled aggregates and ternary cement
1541 Boubakeur Asmaa, Menadi Belkacem, Djelloul Omer Kouider
ID Valorisation des déchets des tanneries en matériaux de construction durables, est-il possible ?
1548 khadidja DJABER
Modeling of Experimental Adsorption Isotherms of Methylene Blue Dye Using Sapindus mukorossi
ID
Pericarp Residue Biomass After Saponin Extraction
1561
Fatima Zohra Ziri, Abderrezak Benghalem
ID Evaluation of A283 Carbon Steel Corrosion in HCl medium Using hydrazine derivative
1571 Ilhem selatnia, Oday Mohammad Ahmad khamaysa, Assia sid
Potential use of Cerium Oxide as a Catalyst for The Photocatalytic Degradation of Methylene Bleu
ID
(MB) Dye Under UV Light: Effect of Sprayed Volume
1583
Sabrina IAICHE, Soumia TOUAM
The effect of cerium oxide and titanium dioxide nanoparticles on the photocatalytic degradation of
ID
direct blue 14
1594
Manel Dridi

40
 Algerian Coal Reimagined: A Nano-Scale Gateway to Sustainable Materials and Clean
ID Technologies
1617 Meriem FERFAR, Youssouf DRIOUCHE, Amina DRIDI, Souad NARSIS, Elfahem SAKHER, Aissa
BENSELHOUB
Dye Elimination Using Emulsion Liquid Membranes: Experimental Design and RSM Analysis
ID
Abdelkader BENDERRAG, Imene BENABLA, Boumediene HADDOU, Jean Paul Canselier, Christophe
1626
Gourdon
Détermination des paramètres thermodynamiques des mélanges PLA/PMMA par des méthodes
ID
numériques
1635
Lynda Abbane, Naima Khemici-Doulache, Mohamed Wafik Khemici, Mohammed Atma
Adsorption removal of methylene blue dye from aqueous solution using H3PO4 activated peanut
ID shells
1654 Farida Hamdache, Farid Halet, Saida bekhti, Ahmed Réda Yeddou, Boubekeur Nadjmi, Abdelmalek
Chergui
ID Effect of Toluene and THF on Asphaltene stability
1660 Ikram Ghalem, Karima Naamoun, Mortada Daaou, Boumediene Bounaceur
Étude de l'efficacité inhibitrice d’une molécule organique nouvellement synthétisée, vis-à-vis de la
ID
corrosion de l’acier XC70 en milieu acide.
1699
Benramdane Razika*1Amel Djedouani2, Linda Toukal3 et Benghanem Fatiha4
ID Recycling of an industrial waste used for the disposal of organic compounds
1753 MEZOUAGH Amina
Monte Carlo Simulation of Low-Energy Electron Penetration (1–5 KeV) in Semi-infinite Aluminum
ID
and Gold
1767
Moussaoui Ouidad, Bentabet Abdelouahab, Kahoul Abdelhalim

10:00– 14:00 Online Session | wednesday, April 11th, 2025

Room 3 | Renewable Energies | meet.google.com/ufg-cibj-stu
Online Session Chairs:
Effect of Substituting IZTO with Graphene in a β-Ga₂O₃ Solar-Blind Schottky Barrier Ultraviolet
ID 404 Photodetector
Rima Cherroun, Afak Meftah, Lobna Messeddek
Techno-Economic Optimization of an Off-Grid Hybrid Microgrid System Using Multi-Verse
ID 532 Optimizer
Zakaria Belboul, Belgacem Toual
Degradation Mechanisms and Early Performance Losses of Silicon Solar Modules in the Algerian
ID 542 Sahara
Mostefaoui Mohammed, Ziane Abderrezzaq, Larbi Ahmed Amine
Effet des défauts d’interface sur les performances du système n-B-n InAsSb-n / AlAsSb / InAsSb-n
ID 578 pour la détetion infrarouge:Simulation par SCAPS-1D.
Bentria Marwa, Cheriet Arbia, Mardhi Lina, Mebarki Mohamed, Aït-Kaci Hocine
Improved Grid-Forming Control of Inverters via Finite Control Set Model Predictive Control
ID 650 with Virtual Synchronous Generator Emulation
Mohamed Islam Grairia, Riad Toufouti, Larbi Bousbia
Maximum Power Point Tracking in PV Systems via an Indirect Adaptive Fuzzy Control Approach
ID 728
azzeddine Yahia, Mohamed Tahar Makhloufi, kheireddine chafaa, nadjiba terki
Multidimensional Analysis of Electronic Interfaces for Hybrid Photovoltaic Devices
ID 730
Lina merzougui, Mostefa Benhaliliba
Active Supercapacitor Control to Minimize Battery Stress in PV Systems
ID 737
Abdelkader Halmous, Hossam E.A Abbou, Khadidja Rahmoun
Enhancement of Frequency Using Virtual Inertia Control in Three-Area Interconnected System
ID 742 with High RESs Penetration
Hossam E.A Abbou, Abdelkader Halmous, Salem Arif
ID 777 Contribution of ZnS insulation layer on the performance of CIGS solar cells
41
 Abdelali Laid, Abed Zoulikha
Co-Simulation of Wind Turbine and DSIG Dynamics: A HIL Approach for Resilient Power System
Design
ID 810
khaled benzaoui, Ishaq Aiche, Ismail Ghadbane, Mohammed Boukhari, Abderrahmen Bouguerra,
Samir Zeghlache
Performance Comparison of Funnel Boundary Profiles in PI-Funnel Control of Wind Turbines
ID 822
Zaina AIT CHEKDHIDH, Aghiles ARDJAL, Samira Oussidhoum, Maamar BETTAYEB
Experimental Sensorless Control of Standalone DFIG Using FSPCC and MRAS for Enhanced Wind
ID 840 Energy Conversion
Toufik Mebkhouta, Ben Ouadeh Douara, Youcef Chouiha
Performance Comparison of PI and Predictive Control Approaches in Grid-Connected PVSystems
ID 875 with Five-Level PUC Topology
Touafek Abderraouf, Afghoul Hamza, Krim Fateh, Talbi Billel, Sahli Abdeslem
Le compromis entre la résistance série et l'effet d’ombre dans les cellules solaires en silicium
ID 946 sérigraphiées
Asmaa BOUYELFANE
Reducing Power Loss in PV Systems with Partial Shading Using Optimized PI Control
ID 1001
Loubna Khellaf, Adel Djellal, Hichem Mayache
PI-Funnel Control for the Speed of Wind Energy Systems
ID 1013
Hamdane Goucem, Rachid Saidani, Zaina Ait chekdhidh, Aghiles Ardjal
Implementation of P&O MPPT Algorithm for Partial Shading Conditions in Photovoltaic Systems
ID 1030 Using MATLAB/Simulink
Nadia Bouaziz
Optimized Power Extraction from PEM Fuel Cells Using Incremental Conductance MPPT for DC
ID 1051 Load Applications
Abdelhalim TAIBI, Fatima BACHIR, Rafik BOUAOUINA
Enhanced Distribution Network Performance via Optimal Renewable Integration and Demand
ID 1069 Response
Ahmed Hachemi, Mohamed Sahnoune
Integration of a PV Generator and Parallel Active Filter for Power Quality Enhancement in
ID 1112 Three-Phase Networks
Choayb Bousnoubra, Hassen Belila, Yacine Djeghader, Selma Allele
Adaptive Control of Small-Scale DFIG Wind Turbine Using Luenberger Observer
ID 1145
Yaakoub Diboune, Redouane Hachelaf, Djilali Kouchih
Design and Numerical Analysis of a Wind Energy–Driven Permanent Magnet Synchronous
ID 1186 Generator
Lina BOUHAFS, Salah TAMALOUZT, Ahcen BOUZIDA, Sara ALOUACHE
A Hybrid Algorithm Based on Grey Wolf Optimization and Variable Step Size P&O for
ID 1228 Maximum Power Point Tracking Under Partial Shading Conditions
Soufiane Hadiby, Dalila Beriber, Khelil Zaouche, Abdelaziz Talha
Double Rotor Wind Turbine and MPPT Controle
ID 1236
Afafe Addoun, Abdelkadir Belhadj Djilali, Adil Yahdou, M'Hamed Helaimi, Elhadj Bounadja
Detection and Severity Classification of Stator Short-Circuit Faults in DFIGs via Machine Learning
ID 1291
MIMOUNA ABID, SOUAD LARIBI, M'HAMED LARBI, Abderrahmane ABDELLAH
Convergent-divergent chimney optimization for maximum air flow rate in the solar chimney
ID 1295
Youcef Bouzida, Abdelmadjide Chehhat, Charafeddine Benatmane
Elimination of Multiple Low-Rank Harmonics in a Three-Level Inverter with SHEPWM Using the
ID 1343 Newton-Raphson Algorithm
Haithem BOUKERDOUN, Abdelaziz Talha, Salim Mohammed Benmerabet, Fayçal Chabni
Enhancing the efficiency of solar cells in terms of light absorption and energy conversion through
the preparation of optimized thin films deposited in varying proportions using the spray
ID 1374
pyrolysis technique (SPT).
Amiar Ali
Energy Management System-Based PV-Battery Power System Connected to The Grid
ID 1417
Necir Abdellatif
42
 Simulation the Effect of Absorber Layer Thickness in ZnO/ Cu2O Solar Cell
ID 1421
Khadidja Naceur, Toufik Tibermacine
Study of Temperature and Solar Irradiance Effects on Photovoltaic Array Performance
ID 1443
Salma NAIT BACHIR, Aghiles DJERADI
Impact of TCOs on solar cell efficiency
ID 1468
Mama Bouchaour, Imene Azzouni, Laaarej Merad, Taha Meziani
Finite Control Set-MPC of PV-Fed Split-Source Inverter Connected with the Grid Through an LCL
ID 1573 Filter
Moussa Abderrahim Mehiris, Billel Talbi, Idris Messaoudene, Houssam Eddine Mansouri
Energy building, heating, cooling requirements, and associated costs in greenhouse structures in
ID 1607 arid and semi-arid regions, such as Biskra Province
Ala Eddine Brikel, Hassina Megherbi, Oussama Bouaiss
Sustainable Energy Utilization Models in Greenhouse Agriculture in Biskra Province
ID 1621
Ala Eddine Brikel, Hassina Megherbi, Oussama Bouaiss
Impact of Distributed Photovoltaic Generation on Voltage Stability and Load Profile in IEEE 33-
ID 1630 Bus Distribution Network
Sabrine Morakeb, Samira Boumous, Zouhir Boumous
Brushless Direct Current Motor versus Induction Motor in Photovoltaic Pumping System: A
ID 1642 Comparative Study.
Fatima BELGACEM, Mohamed MOSTEFAI, Aicha BELGACEM, Yahia MILOUD

Numerical analysis of the thermal behavior and electrical performance of photovoltaic modules
ID 387 under different mounting systems
Badreddine LIMANE
Numerical study of thermal and dynamic fields during solar drying of clay bricks
ID 438
Messaoud Sandali
Neural Network Assisted Multi-Objective Optimization of Solid Oxide Fuel Cell channels
geometry
ID 448
Aimen Abdellah Bouaiss, Achraf Senoussi, aymene bacha, ibrahim hedouache, Mohamed Souri
Mimoune
Hybrid Renewable Energy System Manager Using Artificial Intelligence MIMO-Fuzzy Controller
ID 457
ILHAM AOUACI, ALLAOUA BOUMEDIENE
PI based Droop Controller for Distributed Generation Inverters in AC Microgrids
ID 465
Allele Selma, Djeghader Yacine
……………………..
ID 498
ELIAS ABDENOUR
Numerical simulation on the effect of a heated wall configuration on PCM melting processes
ID 508 subjected to external magnetic field
Massouda Djahida Selami, Lakhdar Aidaoui, Yahia Lasbet
The Energy Transition in Algeria: Renewable Energies Between Challenges and Investment
ID 544 Opportunities
Souad Chennoufi
Pyrolysis of Plastic Waste: A Sustainable Approach for Converting Plastic into High-Quality Fuels
ID 545 for Environmental and Energy Solutions
ABDERRAOUF Seddik
Effet du contact arrière sur les performances d'une cellule thermo-photovoltaïque, utilisant le
ID 577 système GaSb-GaAlAsSb(p/n)/InAsSb-n/GaSb à température ambiante.
Cheriet Arbia, Mardhi Lina, Mebarki Mohamed, Ait Kaci Hocine
Integration of Renewable Energy in Zero Liquid Discharge Desalination: Hydrogen Production
ID 581 and Water Recovery Optimization
ABDELLI Islam Safia, ATTOUTI Salima, Bettaher Ibrahim
The optimal FOPID controller design for DFIG-based WECS using metaheuristic algorithm with
ID 582 different cost functions.
MABROUK DAHANE, ABDELKRIM BENALI, Tedjini Hamza
ID 608 A Novel Approach for Optimal Placement and Sizing of Distributed Generation in Radial
43
 Distribution Networks
Badreddine Bendriss, Samir Sayah, Abdellatif Hamouda
Optimization of Water Use in Agriculture: Impact of Salinity and Sodicity on the Permeability of
ID 632 Irrigated Soils.
karou samira
Numerical Analysis of Thermal Regulation in Buildings Using Wall-Integrated Phase Change
ID 653 Materials
Mohamed Lamine Bedjaoui, Abdelghani Laouer
Improving the efficiency of lead-free FASnI3 perovskite solar cell using Zinc-based electron
ID 665 transporting layers.
yacine djalab, Loumafak Hafaifa, Mostafa Maache
Controlled Annealing of Sol–Gel Synthesized CoFe₂O₄ Nanoparticles for Optimized
ID 754 Supercapacitor Electrodes
loubna merabet, meryem acila
Ab initio investigation of structural, electronic, magnetic properties of SnCrO3 and a
ID 803 contribution in spintronic applications
Aissa BENKATLANE, Djamel RACHED, Habib RACHED
First-Principles Investigation of Structural, Electronic, and Magnetic Properties of a Half-Metallic
ID 804 Ferromagnet
Aissa BENKATLANE, Djamel Rached, Asma HACHILIF, Habib RACHED
"Advanced Electric-Thermal Materials: Bidirectional Energy Conversion for Heat-to-Power and
Power-to-Heat Applications"
ID 844
Bouadjemi Bouabdellah, mohamed houari, mohamed matougui, messoudi Abdelkarim, lantri
tayeb, hamiche korichi, samir bentata
Simulation and Optimization of CH3NH3PbBr3 Based Perovskite Solar Cells
ID 968
Fatima Zohra OTMANI
Modeling and Optimization of Lead-Free MASnBr3 Perovskite Solar Cells with FTO/ZnS/Spiro-
ID 980 OMeTAD Structure through Numerical Simulation
Mohamed Amine Benatallah, Abdennour El Mohri, Selma Rabhi
Control of active and reactive power of a wind turbine based on a synchronous generator
ID 992
DAHHOU BRAHIM
Evaluation of the Antibacterial Activity of Extracts Obtained from Natural Resources
ID 1009
Amireche Rayen Cherifa, Lerkeche Ouassila
Cellule solaire à pérovskite sans plomb à haut rendement intégrant deux couches absorbantes :
ID 1019 une étude numérique
Keltoum DRIS
Exploring Case Study to Enhance Photovoltaic Power Forecasting Using Artificial Intelligence
ID 1043 Techniques.
Fares Bennaceur, Boualem Benlahbib, samia gamouh, oussama mezioua
Leveraging Artificial Intelligence for Enhanced Short-Term Photovoltaic Power Forecasting
ID 1046
fares bennaceur, Boualem Benlahbib, samia gamouh, oussama mezioua
Photodegradation Effects on Polymer Materials Used in Photovoltaic Applications
ID 1050
Nour El Houda CHEHAT, Naima DOULACHE, Samira SALI
Integration of Lithium-Ion Battery Storage with Renewable Energy Systems Using a Fractional
ID 1053 Order PI (FOPI) Controller
Abdelhalim TAIBI, Fatima BACHIR, Rafik BOUAOUINA
Enhanced Maximum Power Point Tracking with Variable Incremental Conductance Algorithm
ID 1054 using Sliding Mode Control
Nassir Deghfel
Enhanced PO-MPPT Based PV-UPQC System for Power Quality Improvement and Grid Stability
ID 1066
Zakaria REGUIEG, ismail BOUYAKOUB, Fayçal MEHEDI, Fatiha BOUHADJI
Performance Optimization of CGS/CIGS Triple-Junction Solar Cells Using Silvaco-Atlas 2D
ID 1070 Simulation
DJEDOUI Layachi
ID 1141 Etude des écoulements convectifs et des applications énergétiques à base de nanoparticules de
44
 magnétite.
BITOUR Aya, BOUBAKER Rania, NAOUS Mohamed, KARAS Abdelkader, Abdelillah
BENAHMED
Numerical research on the New kinematic for flapping wing of Droop-Nose Leading-Edge
ID 1175 (DNLE) to increase the extracted power.
Belkacem LAMAMRA, Abdelbasset Chebana, Laala Ghilani, Mohamed Taher Bouzaher
Breaking Efficiency Barriers: A Comparative Simulation of GaAs and BAs Solar Cells for Next
ID 1205 Generation Photovoltaics
Laarej MERAD, Mama BOUCHAOUR, Imane BOUAZZAOUI
3D Numerical Investigation of an Air-Based Hybrid PV/T Solar Collector Featuring Innovative
ID 1212 parallelepiped Fins
Mallik Lynda, BENSIDER Nora, BENDJENNE Abdelghani, CHELBI Fatma zahra
Towards the Study of Stability in the Formation ofOrganic Solar Cells Using Martini force field
ID 1234
SEGHIRI Salah Eddine, SABEUR Sid Ahmed
Robust Networked Control for Hybrid Microgrid under Communication Delays and
ID 1256 Uncertainties
Mahfoudi Rayane yasmine, Boumous Zouhir, Boumous Samira
Performance evaluation of airflow and heat distribution in a drying room through experimental
measurements and CFD modeling.
ID 1336
Zouhair Aouissi, Bourhane Bouhabal, Abdelfatah Marni Sandid, Foued Chabane, Hamza
Benhacine, Salim Eutamene
Insight on structural, optoelectronic and thermoelectric properties of perovskite Rb2B'BiF6 (B' =
ID 1360 Ag, Cu) by an Ab-initio for solar cell and renewable energy applications
Allouche Asma
Electrical Performance and Degradation Analysis of Field-Aged PV Modules in Hot Climate: A
ID 1409 Comparative Experimental Study
Mohammed YOUNES, Belhadj CHEKAL AFFARI, Nabil KAHOUL, Zoubida KHERICI
Comparative Analysis of Conductive and Insulating Shell Materials case of tank
ID 1438
Chahinaz HABIB, Dajffar SEMMAR, Djamel Lafri
Prediction of Photovoltaic Array Performance Using Artificial Intelligence
ID 1446
Salma NAIT BACHIR, Aghiles Djeradi
Numerical study on the effect of the collector diameter of a solar chimney
ID 1470 Ammar SEMANE, Razika IHADDADENE, Elhouas BEDJEGHIT, Nabila IHADDADENE, Elhadj
RAOUACHE
Enhancing Photovoltaic Performance In Hot Climates Using Active Cooling: A Trnsys Simulation
ID 1492 Study
Dida Mustapha, korichi sabrin, Naili Nabiha
Fault Tolerant Control for IGBT in DC-DC Converters of PV Grid Systems
ID 1514
Ahmed Djerboub, Amina Tamer, Tayeb Allaoui
Improving the stability of perovskite solar structure using a protective layer
ID 1549
Aicha Aziza Ayad
Evaluation of the performance and efficiency of fractional-order feedback PI controllers in multi-
ID 1589 rotor wind turbine systems
Habib Benbouhenni, Hamza Gasmi
L’impact du choix de la technique de métallisation sur le facteur de forme des cellules solaires en
ID 1634 silicium.
Asmaa BOUYELFANE
Towards Eco-Friendly Solar Cells: Simulating Alternative Buffer Layers for Improved CZTSSe
ID 1661 Performance
BENTOUMI Khaoula
ID 1802 Bending and Free Vibration Responses of Isotropic and FGM Double-Curved Shells Using Semi-
Analytical Method Based on Efficient HSDT
M. A. Kenanda, Fodil Hammadi, Zakaria Belabed and Brahim Mebarki
ID 1803 Numerical Simulation of Aerosol Behavior in Indoor Environments

45
 Bachir ZEBACH, Fezzioui Naima1 and Benyamin Meberika1
ID 1804 Numerical investigation of PCM-Integrated Building Envelopes: Analysis of Thickness Effects

Brahim MEBARKI, Merwa Hayam LOGAB, Farouk BOUCHAKOUR,

Bachir ZEBACH, Fodil HAMMADI1 and Abdelmadjid ALOUANI1
ID 1805 Environmental impact of wastewater on a semi-arid watershed, North Eastern Algeria
BENRABAH Samia1, TOUATI Mounira2, ALLOUANI Nora3
Advanced Energy Management Strategy for Grid-Integrated PV Systems with Battery Storage
ID 1806
ZAIDI Sarra, MELIANI Bouziane, BOUDDOU Riyadh and MOHAMMED BELHADJ Souheyb
Biotechnological Valorization of Molasses for Bioethanol Production in Algeria
ID 1809
Fatima Zohra Baouche, Djilali ELHADJ Djilali, Cherifa KARA MOSTEFA KHELIL, Ihssen
Hamzaoui, SELIM Aya, HATTAB Soumia
Imane Benkechkache, Mehdi Kaghouche, zerti Mouna

ID 1606 Geospatial Analysis Applied to Natural Hazard Prevention: Methods and Applications. Case
Study of the City of Constantine

Computational Analysis of a New Azo Material for Bulk Heterojunction Solar Cells
ID 1812
Nour El Houda Belkafouf , Ikram Belkafouf, Rachida Rahmani, Merzouk Saidj and Abdelkader.
Chouaih
YOLOv8-Based Real-Time Obstacle Identification and Avoidance with RGB-D Sensors
ID 1813
amar.medjaldi
Optimizing PV Energy in Photovoltaic Systems Integrated with Lithium-Ion Battery Storage
ID 1684
Nadia Ben Si Ali, Nora Zerzouri, Nadia Benalia
ID 1686 Model Predictive Control: A Robust Strategy for Fault Detection and Mitigation
Hadia Belhouchet, Zouhir Boumous, Samira Boumous
Adaptive PID Control of H₂ and O₂ Supply Pressures for Improved Efficiency and Stability of
ID 1687 Fuel Cell Systems Under Fluctuating Load Conditions
Kabache Sabah, Bouregba Hicham
FPGA-based Real Time Implementation of Lyapunov-based Model Predictive Control for LCL
ID 1714 Filtered Grid-tied Inverter
Moussa Abderrahim Mehiris, Billel Talbi, Idris Messaoudene, Houssam Eddin Mansouri
Dynamic Stall Analysis in H-Type VAWTs: A Numerical Study
ID 1731
Abdelouahed Ayachi Amar, Ali Ayachi Omar, Chaima Ayachi Amar
Modeling and Control of a Marine Current Turbine
ID 1749
Rayenne KADRI, Zakia ACHAIBOU, Abdelkader GARMAT
Degradation of multicrystalline silicon solar cell under illumination
ID 1754
Imad Yacine Zentar

46
 Online Session | wednesday, April 11th, 2025
10:00– 14:00
Room 4 | Chemistry | meet.google.com/mqu-moui-oms
Online Session Chairs:
Élimination photocatalytique assistée par UVA de la rhodamine B à l'aide de charbon activé
ID 403 synthétisé de manière écologique dérivé des noyaux de dattes et imprégné d'Ag/ Ag3PO4.
Fouad GUENFOUD
Synthèse, calculs théoriques et docking moléculaire de 3-méthyl-2-alkylthio-5-
ID 425 phénylaminométhylène imidazol-4-one .
MERDJA KHEDIDJA
Volumetric and Optical properties of the binary mixtures of 1-ethyl-3-methylimidazolium ethyl
phosphonate + methanol or 2-propanol
ID 434
FARIDA ALLAL, Fatiha BENTAHAR, Messouda BOUZIANI, Omar ElFarouk HOUACHE, Zohra
HOUYOU
Nanoparticules supportés sur des mésopores pour l'adsorption de CO2 et le stockage de H2
ID 574
Asma Kawther Lachachi, Rachida Ouargli Saker, Lylia Saker
Quantum study of corrosion inhibition of carbon steel in acidic medium by a new molecule
ID 643 SB-H
Imene BENMAHAMMED, Tahar DOUADI, Saifi ISSAADI
Chemical Composition and Acaricidal Activity of Eucalyptus sideroxylon from Algeria
ID 657
Ghania Atmani-Merabet, Sihem Fellah, Hichem Hazmoune, Abdelmalik Belkhiri
Quantum Chemical Insights into the Nonlinear Optical Properties of Chalcone Derivatives for
ID 684 Optoelectronic Material
Benamar Baroudi, Toufik Bensafi, Djebar Hadji
Structure optimization during the adsorption of FAF on a metallic surface
ID 709
Hanaa SARI MOHAMMED, Karim MERABTI, Sihem AZIZI
Evaluation of the corrosion inhibiting efficacy of three isoxazoles derivatives against XC38
ID 719 steel corrosion in HCl
Rebie Chahrazed, Benali Omar, Sehmi Abdelghani
« 5-[(2-Hydroxyethyl)aminomethyl]-8-hydroxyquinoline: Synthesis, structural analysis, and
ID 720 evaluation of antiproliferative activity. »
AOUNALLAH Aicha Houaria, HADJEDJ-AOUAL Fatima, CHADLI Radouane
UTILISATION DES NANOMATERIAUX POUR LA SYNTHESE D'HETEROCYCLES AZOTES PAR
ID 758 CYCLOADDITION DIPOLAIRE-1,3
sarah zeghada, Mohammed Amine Mehdid, Nawal Ameur, Ghenia Bnetabed-ababsa
Synthesis, Spectroscopic Studies, and Crystal Structure of 2-(5-Bromo-2-
hydroxyphenyl)benzimidazol-3-ium Acetate Acetic Acid Solvate
ID 787
Raounek Rouag, Lamia Bendjeddou, Stéphane Golhen, Amani Hind Benahsene, Hocine
Merazig
Identification of Acetylcholinesterase Inhibitors and Stability Study of Inclusion Complexes:
ID 797 Computational Perspectives
Noria Mostefai
Synthesis, characterization, and photoluminescence studies of a novel Dy(III) coordination
ID 869 polymer.
Roza MAOUCHE, Yasmine CHEDDANI, Sabrina BELAID, Belkacem BENMERAD
Characterization of magnesium carbonate-reinforced polypropylene composites processed by
ID 890 injection molding
GUEMMOUR Hind, KHEFFACHE Djaffar
The effect of mineral salt concentration on the biosynthesis of nanoparticles from a medicinal
ID 944 plant
ABDELHAK AZZOUZ, Nadia fekih, Mohamed beldjilali
In Silico Prediction of Pharmacokinetics and Toxicity for a Dibrominated Aromatic
ID 998 Compound: Implications for Drug Development
Douadi Khaoula, Rikouh Rahma Amina, Douadi Tahar

47
 EXTRACTION DES ALCALOIDES A PARTIR DES PLANTES (Datura stramonium L)
ID 1060
aicha ZERROUKI, ahcene AIT AMER, mostefa KAMECHE, Cristophe innocent
Synthèse, Caractérisation Spectrale, Docking Moléculaire Et Analyse ADMET D’un Nouveau
ID 1079 Dérivé De La Vanilline
Takoua Belghit
OPTIMISATION DE L’EXTRACTION DE BLEU DE METHYLENE PAR MEMBRANE LIQUIDE
ID 1081 EMULSIONNEE EN UTILISANT LE D2EHPA COMME EXTRACTANT
Bendebane farida, Bendebane Salima, bendebane Hawa, Ismail Fadhel
Predicting Melting Points of Polycyclic Aromatic Hydrocarbons Through QSPR Modeling with
ID 1167 Multiple Linear Regression
Youssouf DRIOUCHE, Meriem Ferfar, Amina Dridi, Ouahab Rahim, Salah Arif
Date Pits as a Polysaccharide Source: A Compositional Study
ID 1270
K., K., M., S., S.M.,S. BABOUCHE, HAFID, AGGOUN, SILVA, CARDOSO, FERREIRA
Synthesis, crystal structure and Hirshfeld surface analysisof Di-aqua-(1,10-phenanthroline-N,N')-
ID 1272 Nickel(II)sulfate complex
Ines Benzitouni, Nesrine Benarous
ALGERIAN Ruta. Sp: A NATURAL SOURCE OF BIOCTIVE COMPOUNDS FOR OXIDATIVE
STRESS THERAPY
ID 1297
Amira Randa Rimas Meziane, Hind FENGHOUR, Hanane SEGHEIR, Nessrine MERHOUNE,
Nasreddine BENABDESSALEM
Exploring the Antidiabetic Properties of Bioactive Compounds in Elaeagnaceae Species
ID 1333 rayene Bouaita, Randa Djemil, samira bouhalit, saber boutellla, zineb bouamrane, amina
hamzaoui
In silico Evaluation of Warfarin Enantiomers Affinity Toward the Cytochrome CYP2C9 using
ID 1346 Molecular Docking Study
Marwa Ghouizi, Khaled Sekkoum, Nasser Belboukhari
From Waste to Wealth: harnessing Plant Extracts for Green Corrosion Inhibition in Pickling
ID 1392 Processes
Lamis TOUATI, Mina BOULKROUNE, Kamilia Chahrazed KSIR
The formation of inclusion complex system between β-Cyclodextrin and Pyrazolidine:
ID 1396 characterization physicochemical and in-vitro antibacterial activity
Boubaker BOUKELLAL
Deep modeling approach combining DFT, NBO, AIM, TD-DFT, GIAO and SQMFF for the
ID 1407 study of a choline-based ionic liquid
Aya Khadidja TOUIL, Boumediene Haddad, Bekhaled Fetouhi
Chemistry of the vine cane waste
ID 1471
fatima kamah, Norhane Chouiter
Stereoselective Synthesis of R-1-(1-hydroxybutan-2-yl)-3-phenylthiourea
ID 1491
Thinhinane HAMACHE, Nasser BELBOUKHARI, Khaled SEKKOUM, Mohammed El Amin Zaid
VCD Analysis of Chiral N-Phenyl Thiourea Derivatives
ID 1493
Halima OULAD ALI, Nasser BELBOUKHARI, Khaled SEKKOUM
Molecular Docking Approach of 1-(1-hydroxypropan-2-yl)-3-phenylthiourea as a Potential
ID 1528 Mitogen-Activated Protein Kinase 14 (MAPK14) Inhibitor for Anti-inflammatory
Djawhara HADDAD, Nasser BELBOUKHARI, Khaled SEKKOUM, Meriem BOUANINI
The role of planted dune sand filters in improving the quality of treated water from
ID 1563 wastewater treatment plant No. 2 in the Oued Souf region (S.E Algeria)
Hnanou Ahmed, Mimeche Leila, Zouita Nadjoua
Development and Analysis of SnO₂ Thin Films
ID 1565
Tioursi amina, Miloua redouane
Extraits de plantes : leur effet biologique et leurs applications thérapeutiques
ID 1647
charif guiassa, sihem boudermine, Imen Ramli, Tarek Boudiar
Bioactive Rhodanine Derivatives: DPPH and ABTS Radical Scavenging Studies
ID 1710 HAOUA HAMANA, ABDELKRIM GOUASMIA, MERIEM BOUMEDJOUT, Chaouki BEN
SOUICI
ID 1722 Sustainable synthesis and theoretical study of some novel carboxylsulfonamides
48
 Soumaya Bouskia, Chafika Bougheloum
ID 397 Fragment-Based Drug Discovery of KRAS G12D Inhibitors for Pancreatic Cancer Therapy
Narimene Chahbaoui, Saida Khamouli
ID 399 DFT Study of the Adsorption and Sensing Behavior of MGe55 (M = Rh, Cr, Mo) Monolayers
Towards Toxic Gas Molecules
meryem derdare, abdel-ghani boudjahem, yasmine mezari, cheghib nedjoua
ID 401 Structural Study Of A New Polymorph Of 5,5-DichlorobarbituricAcid
wahiba Falek, Rim Benali-Cherif, Radhwane Takouachet, Zoubir Hemame, Faouzia Hamadi,
Nourredine Benali-Cherif
ID 432 Étude comparative de l’activité antioxydante et de l’effet hémolytique des huiles essentielles et
extraits de deux plantes médicinales : une approche en chimie verte au service de la santé
Meliani Nawel, Tchenar Faiza, Medjedoub Houria
ID 452 ANALYSE DES POLYPHENOLS ET DE L’ACTIVITE ANTIOXYDANTE D’UNE HOEV
COMMERCIALE
ESMA BOUDEHANE
ID 475 ÉVALUATION DE LA CYTOTOXICITÉ IN VITRO DE L'EXTRAIT HYDRO-ACÉTONIQUE DES
ÉCORCES DE FRUITS DE PUNICA GRANATUM
YOUNES Ikhlas, BENTABET Nesrine, MEFTAHI Choukria
ID 492 Electrochemical characterization of metallic materials in presence of an organic inhibitor in
HCl acid studying the effectiveness against corrosion
ikram DAKHOUCHE, Rachida KERKOUR, Nadjib CHAFAI
ID 570 Synthesis, characterization, crystal structure , FT-IR and HS of Zinc(II) Complexes.
Narimane Marwa Boukezzoula, Mehdi Boutebdja, Ahlem Linda Boulkedid, Tim GRUENE
ID 611 Electrochemical study of a plant extract as a corrosion inhibitor for steel in acidic environment
ksir kamilia, Boulkroune Mina, Touati Lamis
ID 626 Evaluation of the bactericidal efficacy of Balanite Aegyptiaca plant extract
YAZID AMRI, Mohammed abdelkader Belalem, mohammed said Nedjimi
ID 645 ABTS+ radical scavenging capacity of the key bioactive compound in rosemary essential oil
(Rosmarinus officinalis)
lezrag Hayet Ahlem
ID 673 Extraction of bioactive compounds and evaluation of the antioxidant activity of an Algerian
plant
ARAB Ouahiba, sebih fatiha, BELLAHOUEL Salima, KAMBOUCHE Nadia
ID 683 Adsorption du collecteur cationique sur quartz et son implication en flottation.
OUIZA MOHAMMED CHERIF
ID 726 Removal of Acid and Reactive Dyes Using Bentonite Intercalated with Hydroxy-Aluminum
and Cetyltrimethylammonium Bromide
faiza zahaf, reda marouf, fatima Ouadjenia
ID 778 In vitro assessment of total phenolic content, antioxidant activities of aqueous extract of
Echium boraginaceae family growing in the M’sila region (Algeria)
Amel FENNICHE
ID 798 Synthesis, biological evaluation and in silico analysis of 4-arylidenepyrazolone derivatives.
Rania Addadi
ID 827 Evaluation of the antioxidant activity of a medicinal plant from the Constantine region
(northeastern Algeria)
Aya Brika, Nadia Zeghad, Naoui Amira, Latifa Khattabi
ID 835 TREATMENT OF DAIRY WASTEWATER BY ADSORPTION ON ACTIVATED CARBON
EULMI AMINA, Abrane Rahma, Hazourli Sabir
ID 858 Highly Efficient Photocatalytic Degradation of Methylene Blue Dye Using Sodium
Alginate/TiO₂ Nanocomposites
Fadila Bekkar, Hadjer Belhaoua, Faiza Betaher, Rachid Meghaber
ID 865 Nanostructured micro-sensor for p-aminophenol determination in water samples
Lydia TAOURI, Mustapha BOUROUINA, Saliha BOUROUINA, Didier HAUCHARD
ID 866 Modulating Bovine Xanthine Oxidase Activity: The Role of Buffers and Salts
Fatna Bellahcene, Khedidja Benarous, Abderahmane Linani, Alaeddine Kaouka, Mohamed
49
 Yousfi
ID 894 DFT Study of AgnMo Clusters for Green Catalysis: Adsorption of SO₂ and H₂S for
Environmental Remediation
meryem derdare, abdel-ghani boudjahem, yasmine mezari, cheghib nedjoua, bochra
bencheikh
ID 895 Prediction of Fish Acute Oral Toxicity (LC50) of Pesticides Using QSAR Model
Badiet El Djamel Nedjma Mahtal
ID 945 Machine Learning for Chemical Innovation: From Material Functionalization to Food Analysis
Soraya Aidene
ID 951 A nonenzymatic IN625F-Ni(OH)2 electrodes for glucose oxidation adorned with Nickel
nanoparticles (NPs)
Rafiaa kihal, Mohamed Lyamine Chelaghmia, Fatima Zahra Makhlouf, Hassina Fisli, Widad
Drissi
ID 954 The alcohol extract of Calycotom spinosa as a green corrosion inhibitor for XC38 steel
oussama zaoui, Farouk Boudou, Abdelghani Sehmi, Karima Dehak-Oughlissi, Mebarka
Bouziane
ID 970 Comparison of deferent processes direct photolysis homogeneous photo-Fenton and
heterogeneous photo-Fenton and complex nanoparticle system and Like-Photo-Fenton
heterogeneous
Ibrahim Mouhoub * 1 , Farid aoulmit 2 , Sami kemoukh 3 Ibrahim Mouhoub * 1 , Farid
aoulmit 2 , Sami kemoukh 3
ID 986 Molecular Modeling of Pomegranate peel Phenolic Compounds: Solvent Interactions and
Activity Prediction.
BOUKEZZOULA Amina, BOUDEMAGH Djalila, BOUNEKHEL Mahmoud
ID 1028 Electrochemical Detection of Heavy Metal Ions Based on Nanocomposite Materials – A MINI
REVIEW.
Zebida Nouis, Naima Maouche, Chahrazad Amrane
ID 1044 Phosphorescence, molecular docking and molecular dynamic simulation of Pt(II) complexes.
IDDOU Dehbia Kaouthar
ID 1115 Cerium oxide nanoparticles as corrosion inhibitors for A1008 carbon steel in 3.5% NaCl: A
study on the effects of immersion time.
Safa Salmi, Hichem Boudellioua
ID 1126 Preparation of Isobornyl/Bornyl Methacrylate from Artemisia Arborescens Essential Oil
Naziha Chabane, Fayçal Dergal, Chewki Ziani-Cherif
ID 1153 Criblage phytochimique de plante médicinale saharienne Rhus Tripartita (Ucria)
atouani hadjer, benmahdi houcine, fellah khadidja
ID 1262 Synthesis of Fatty Nonionic Surfactants with Azole Ring and Study of Their Surface Parameters.
Manel Chehrouri, Adil Ali Othman, José Miguel Sansano
ID 1373 New Schiff bases derived from o-cyanoaniline: synthesis, crystal structure, Hirshfeld surface
analysis, biological activities, ADMET and molecular docking studies
Nesrine Benarous, Ines Benzitouni, Hassiba bougueria, Nabila Moussa Slimane, Aouatef
Cherouana
ID 1469 Efficient heavy metal removal from water using a novel thiosemicarbazone-based ligand
Mohammed Yassine HAMIMED, Imane BELFILALI, Fouad GUENFOUD
ID 1475 A GREEN CHEMISTRY APPROACH TO THE RESOLUTION OF SECONDARY ALCOHOLS VIA
ESTERIFICATION REACTION
Rahma Achouri, Nedjma Melais, Wassila YAHIA
ID 1481 Chemical Composition and Antimicrobial Potential of of Lavandula angustifolia Essential Oil
FATMA ZOHRA AYACHI AMAR, Mohamed Bilal GOUDJIL, Zineb MAHCENE, ASMA
AYACHI AMOR, CHAIMA AYACHI AMAR
ID 1487 Chemical Composition and Antimicrobial Potential of Mentha longifolia Essential Oil
FATMA ZOHRA AYACHI AMAR, Mohamed Bilal GOUDJIL, Zineb MAHCENE, ASMA
AYACHI AMOR, CHAIMA AYACHI AMAR
ID 1522 Modélisation moléculaire des anomères d’un biotensioactif à base de D-xylose
LOULOU Fatma, BIDJOU-HAIOUR Chahra
50
ID 1581 A computational study of the mechanism and selectivity of [3 + 2] cycloaddition reaction
between alkenes and nitroalkanes substituted with O-alkyl oxime groups.
Ahlam Chiheb, Wassila Yahia
ID 1623 A DFT study of the host-guest interaction between boric acid and β-cyclodextrin
Nihad MEKARBA, Ferial Krid, Youghorta Belhocine, Abdelaziz Bouhadiba, Seyfeddine Rahali
ID 1674 Synthesis and cgaracterization of cancrinite zeolite
Lagraa Ouafa
ID 1676 Influence of the extraction solvent on phenolic content, antioxidant, and anti inflamatory
activities of Ephedra Alata Alandra.
SAMIRA BOUHALIT, lilia DOUAOUYA
ID 1698 Comparative HPLC Analysis of Ascorbic Acid Content in Ethanolic Extracts of Leaves and Pulp
of Ceratonia siliqua L. from Blida and Tipaza (Algeria).
Yasmine Merdji, Meriem Touaibia
ID 1719 …………..
bekakria hamida
ID 1728 Evaluation of AntiAlzheimer's Potential of new Azo Dye : Synthesis, c haracte ri za tion
andCholinesterase Activity
Sana Bouanani, Hassiba Bougueria, Nesrine Benarous
ID 1762 In Vitro Anti-inflammatory Efficacy: N-FERROCENYLMETHYL-N-ACETYL-2-CHLOROANILINE
Compared to Steroidal/Non-Steroidal Agents
marwa djarallah, Elhafnaoui LANEZ, Lazhar Bechki, touhami lanez, aicha adaika

10:00– 14:00 Online Session | wednesday, April 11th, 2025

Room 5 | Engineering | meet.google.com/rnt-voge-uvo
Online Session Chairs:
ID 369 Investigating the Capability of VLC at Vehicular Intersections Scenario
Aicha Meghraoui, Mohamed Larbi Tayebi, Mokhtar Besseghier
ID 501 An Enhanced P-Version Finite Element for Free Vibration Analysis of FGM Sandwich Plates
with Multiple Porosity Distributions
BENTRAR HAKIM, Belalia Sid Ahmed, Chorfi Sidi Mohammed
ID 550 Process Optimization and Sustainable Valorization of Juniperus oxycedrus Essential Oils: A
Chemical Engineering Approach
Soumia MENAD
ID 589 a Numerical Simulation of Combustion in a Spark-Ignition Engine Running on Bioethanol
Bouighi Habib, Bengherbia Nardjes
ID 637 Impact of axial load variation on lateral dynamics and wave propagation in periodically
constrained drill strings: An Euler-Bernoulli beam analysis with periodic contact modelling
NORA BENMIR, Hamza Akroum, Mohamed.Z Doghmane
ID 647 Study of the speed control of a brushless Motor Based on indirect AC/ AC converter
Asma BENHEMINE, Hamza TEDJINI, Abdel Djabar BOUCHAALA, Imen CHAOUFI
ID 695 Data-Driven Machine Learning Approach for CO Emissions Forecasting in Industrial Power
Systems
Hassina Madjour, Hanane Zermane
ID 740 Mechanical characterization and multiscale approach of Date Palm Fiber-Reinforced PVC
composite
Samir Chouarfia
ID 744 Effet des propriétés mécaniques et dimensions de la cupule à double mobilité sur la contrainte
maximale du ciment osseux.
Benali Boutabout, Mohamed Mokhtar Bouziane, Noureddine Djebbar, Rachid Hadj Boulenouar
ID 855 Stealthy False Data Injection Attack against State Estimation in Smart Power Grid: A review
Younes Gasmi, Noureddine Bali, Atif Karim, Soufiane Belagoune
ID 856 Improving Cybersecurity in Smart Power Systems Through Machine Learning algorithms and
Data Augmentation
Younes Gasmi, Noureddine Bali, Atif Karim, Soufiane Belagoune

51
ID 961 Numerical study of the Influence of various types of nanomaterial on natural laminar convection
in heat exchanger
Addour khalissa
ID 1005 Electronic Structure, Optical Response, and Thermoelectric Potential of a Half-Heusler
Compound: A DFT Study
Aya Righi, Fatima Bendahma, Abbes Labdelli, Khedidja Mechehoud, Mohamed Mana, Bilel Achir
ID 1064 Electrical Reflectometry: From Conventional Diagnosis to Advanced Distributed System
Monitoring
Yasmina Tabouri, Mouad Addad, Ali Djebbari
ID 1099 Numerical Simulation of an Asymmetric Three-Dimensional Supersonic Nozzle Square-Shaped
Abada Omar, Ammour Fidaa
ID 1113 PQ & DQ based shunt active power filter with hysteresis technique
Choayb Bousnoubra, Hassen Belila, Djeghader Yacine, Selma Allele
ID 1128 Increasing Heat Exchanger Efficiency: The Impact of Strategic Baffle Implementation
litouche billel, Abdedaim Imene, Rebai Billel, Bella Mourad, Benslimane Hocine
ID 1148 Investigation of Phase Equilibrium in Ternary Liquid-liquid Extraction Systems
Soumaya Larous, Nadjet Boulkroune, Yousra Yamoun, Rania Tadjadj
ID 1180 Effect of Tempering Temperature on Hydrogen Desorption of AISI 4140: Neural Networks
Analysis
Soumia OURRAD
ID 1213 Enhancing Surface Roughness in Steel Machining: A Comparative Study of Ceramic Tools.
Hadjira LOT, Mohamed ELBAH, Mustapha TEMMAR, Nesrine MELZI
ID 1263 Numerical simulation of the degradation effects of adhesives and composite materials used in the
strengthening of damaged structures
BELGHOUL Hakima
ID 1340 Green and Efficient Extraction of Phenolic Compounds using Ultrasonic-Assisted Extraction:
Effect of Extraction Parameters
Monssef Merdjemak, Hadjer Mabrouki, Rosa Haouche, Djamal Eddine Akretche
ID 1494 Deep Learning-Based Thermal and Structural Analysis of Bone Tissues in Medical Imaging
Meriem Zeboudj
ID 1513 Effect of Various Parameters on the Dynamic Performance of Rotating Shafts Using FGMs and
p-FEM
abdelfetah moussouni, Ahmed Mezrag
ID 1518 Thin layers of ZnO under negative pressure for enhancing SAW strain sensor applications
Fahima Arab, Fares Kanouni
ID 1616 Theoretical and experimental investigation of the limiting flow discharge and the characteristics
of the hydraulic jump in a "U"-shaped channel.
sonia cherhabil, Ali Bedjaoui, Seifedine Benabid
ID 1655 Machine Learning Techniques for Fault Detection and Classification in Industrial Systems
Hassina Madjour, Rahmouni dejmaa, Hanane Zermane, Mohammed Djamel Mouss
ID 1732 Towards optimized maintenance in a distributed context
khaoula soltani, Messaoud Benzouai, Mohamed Djamel Mouss
ID 1764 Numerical Simulation of Magnetohydrodynamic Natural Convection in a W-Shaped Cavity
Filled with Ag-water Nanofluid
BOUKHAMLA FATIMA ZOHRA, ZEMANI Farah, LADJEDEL Omar, SEREIR TEWFIK
ID 468 Vehicular Applications Safety Aided Visible Light Communications
Aicha Meghraoui, Mohamed Tayebi, Mokhtar Besseghier
ID 519 Impact du climat semi aride sur les variations des paramètres physicochimiques des eaux
souterraines dans la région de
Rihab Chougar, Fethi Baali, Lassaad Ghreib
ID 520 Mapping the spatial variations of physicochemical parameters in the Tebessa–Morsott plain
using GIS
Rihab Chougar, Sana Rachi, Fethi Baali
ID 539 Comparative Analysis of Transfer Learning-Based Deep Learning Models for Brain Tumor
Classification
Abdelkarim Cherhabil
ID 549 Elaboration d’un film biodégradable à base d’amidon de pomme de terre

52
 fahima bouarar
ID 573 Science, ingénierie et agriculture durable : valorisation des déchets végétaux pour une économie
circulaire
Khedidja HOUTIA
ID 649 Comparative study of direct matrix converter and indirect converter
Asma BENHEMINE, Hamza TEDJINI, Imen CHAOUFI, Abdel Djabar BOUCHAALA
ID 663 Contribution to the study and improvement of fiber composite materials of plant.
Nedjema Araar, Nedjema Araar
ID 707 The importance of drain sizing in the stability of embankment dams
Latifa BENDAOUDI, Nadia SMAIL, Bouchrit ROUISSAT
ID 793 Effet de la géométrie de l’empreinte du poin FSW sur le comportement mécanique des
assemblages réparés par friction malaxage
Hasna Hadj boulenouar, Mohamed Mazari, Rachid Hadj boulenouar
ID 805 Detection and Diagnosis of Rotating Machinery Mechanical Faults Using MCSA and DWT-
Energy Technique
Houssem Hamdane, Abdelkarim Bouras, salim Aouabdi
ID 834 Optimizing Wireless Sensor Network Communication:A Comparative Study of ZigBee and
DigiMesh Protocols
Halima Sahraoui, Ameur Dahani
ID 851 Enhancing Machine Learning Algorithms through Feature Engineering Techniques for
detecting Cyber Attacks in Smart Power Grid
Younes Gasmi, Noureddine Bali, Atif Karim, Soufiane Belagoune
ID 889 Enhanced Gain of Reconfigurable Beam Slot Antenna Integarting Dielectric lenses for WLAN
applications
AICHA GHERBI, idris messaoudene, Massinissa BELAZZOUG, Choumeyssa CHENNOUF,
Boualem HAMMACHE, Salem TITOUNI
ID 921 Modélisation tribo-dynamique des interactions rotor-palier hydrostatique
Belgacem Souad
ID 953 Analytical Evaluation of MIMO Antenna Performance for 5G Applications Using a Combined
Cost Function of S11 and ECC
remili fatima, Bouttout Farid, Asma Djellid, Amine Harhouz, Brahimi Abdelhalim
ID 1008 Hardware Implementation of the space vector PWM control for a three-phase inverter
supplying an induction motor
Chafa mohamed, baali Mehdi
ID 1011 The effect of magnetic field on hydro-magnetic hybrid nanofluid flow through converging-
diverging channels
Daoudi Safa, Sari Mohamed Rafik, Kezzar Mohamed, Nehal Abdelaziz
ID 1025 Optimizing Wavelet Choice Based on Noise Source in Partial Discharge Denoising
Mohamed Ayoub Sahnoune, Boubakeur Zegnini, Tahar Seghier, Ibrahim Chakkem, Ahmed Hahemi
ID 1117 Interaction study of HDPE gas pipes with aggressive hydrocarbon environments
bouslah kouka, richi marwa, berkas khaoula, hamlaoui nacira, chaoui kamel, alimi latifa, melais fatma
zohra
ID 1122 Advanced Simulation of 5G Networks: Link and System Level Insights
Khalil Ibrahim Lairedj, Ikram OUICI, Sarra ABDEDOU
ID 1124 Remote Sensing and GIS for Identifying Flood-Prone Areas Using the Topographic Wetness
Index (TWI) in Mountainous Regions.
Farid Aoulmit, Ibrahim Mouhoub, Sami Kemoukh
ID 1138 Effect of Solvent Ratio on Liquid-Liquid Equilibrium in Quaternary Solvent Mixtures for
Formic Acid Extraction
Boulkroune Nadjet, Larous Soumaya, Kerboua Imene, Mahimoud Salsabil
ID 1155 comparative analysis of the vibration frequencies of a cold-formed steel model: experimental
and numerical approach
ibtissam dekmous, zahira bendla, naoual Djafour
ID 1162 Simulation-Based Analysis of Cache Size Influence in NDN Topologies
SEGHIER Meftah, Bouziani Merahi, KANDOUCI Chahinaz
ID 1166 MTPA-fuzzy DTC for Minimizing Torque Ripple in IPMSM Powertrain for Vehicular
Propulsion
53
 Norediene Aouadj, Kada Hartani, Yousra Slaimi, Israa Tlemsani
ID 1168 Comparative study of advanced oxidation processes on the degradation of persistent industrial
dye
KERABCHI NASSIM
ID 1178 Impedance Techniques for Thickness Control of Platinum Layers on Nickel Substrates
Chifaa ABER, Azzedine HAMID
ID 1196 Enhancing Micro-Scale Combustion Performance in Micro-Thermophotovoltaic Systems Using
Full Factorial Design and Response Surface Methodology
Lina Chouichi, Mohamed Said KAHALERAS, Salaheddine Azzouz
ID 1208 Analysis of the Influence of Patch Fiber Orientation on Stress Distribution in the Adhesive
Selma AMINALLAH, Lamisse TAYEBOUN, Sidi Mohamed FEKIH, Hamida FEKIRINI
ID 1214 Precision characterization of straightness and angular deviations in prismatic axes using the
Bryan principle
Mechta Ahlem, Slamani Mohamed
ID 1217 Consensus Gain Effect on Convergence Speed and Delay Tolerance in Multi-Agent Systems
Amina Khalfaoui, Sihem Kechida
ID 1218 Wavelet-Deep Learning Network for Low-Light Image Enhancement
Bilal AOUINANE, Abderrahmane NAMANE, Zahia NABI
ID 1227 Impact of Superhydrophobic Surface Roughness on Air Trapping and Droplet Behavior under
Electric Field
sara alouache
ID 1243 Intelligent Forest Fire Monitoring via GSM Communication Network
Adil BAKRI, Djamaleddine Berrabah, Boumediene Khaouani
ID 1265 Numerical Analysis of Composite Materials through Python–ABAQUS Integration
Mechta Ahlem
ID 1268 Influence of Soil-Structure Interaction on Inelastic Displacement Ratios in Structures on Soft
Soil: Artificial Neural Networks Based Framework
ADNANE BRAHMA, MOHAMED BENELDJOUZI, MOHAMED HADID, SAHRAOUI GHOUL
ID 1271 Comparative Evaluation of DWT and WPT Techniques for ECG Signal Denoising
Zahia NABI, Saida DAHMANE, Bilal AOUINANE
ID 1287 Effect of notch position on the fracture energy of HDPE pipe: impact mode
Nacira HAMLAOUI, kouka BOUSLAH, Mohamed Cherif Djamaa, Kamel CHAOUI
ID 1293 EMD-Based Bearing Fault Detection in Induction Motors Using Simulated Vibration Data
DAHMANE Saida, NABI Zahia, MORAKCHI Mohamed Razi
ID 1296 Incidence des films plastiques sur le comportement d'emboutissage des aciers
Imene Abdedaim, Billel Litouche, Elhadj Ouakdi
ID 1303 EMD-Based Bearing Fault Detection in Induction Motors Using Simulated Vibration Data
DAHMANE Saida, NABI Zahia, MORAKCHI Mohamed Razi
ID 1321 Analysis of pedestrian bridge comfort under pedestrian induced loading
lynda lounaci, Hocine HAMMOUM, Karima BOUZELHA
ID 1323 Fault Diagnosis in Five-Level NPC Inverters Using Backpropagation Neural Networks
Abderrahmane Abdellah, Djilali Toumi, M'hamed Larbi, Mimouna Abid
ID 1378 Three Level T-type Inverter Capacitor Voltage Balancing
Sofiane BRAHAMI, Ali BERBOUCHA, kamel DJERMOUNI, Said AISSOU, Elyazid
AMIROUCHE, Kaci GHEDAMSI
ID 1385 Study of CMOS Circuit Performance Under Varying Temperature and Channel Dimensions
remili fatima, Abdelhalim Brahimi, Nacerdine Bourouba, Okba Saidani, Abderrahim Yousfi, Amine
Harhouz
ID 1406 Effect of Shape Ratio on the Thermophysical Properties and Thermal Behavior of Nanofluids
NESRINE RACHEDI, Maiza imad
ID 1419 Constituent Materials Impact on the Characteristics and Performance of a Single-Sided Linear
Induction Motor
AISSA BENSEHILA
ID 1420 Palmprint Recognition Systems Using Transfer Learning Techniques: A Comparative Study
Kheira Fairouz BEDJEKINA, Bilal ATTALLAH, Youcef BRIK, Cheyma NADIR
ID 1426 Enhanced Speed Control of PMSM Using 2-DOF-PI based Artificial Neural Network Controller
tahar nouaoui
54
ID 1430 Three-Dimensional Investigation of Active Control of Corner Stall in Axial Compressors
Hayette DJEDAI, Mokhtar AOUISSI
ID 1445 Towards a Hybrid Approach for the Dynamic Assessment of Thermal and Toxic effects from
Boil-over in Petroleum Storage Facilities
Imane Aila, Samia Chettouh, Djamel Haddad
Effets des traitements thermiques sur les caractéristiques microstructurales et électrochimiques
ID 1814 de l’acier 304 soudé
ZIDANE KHEIRA , SEDDIKI HAYAT and BOUAKSA FETHIA
Encapsulation du Diclofénac Sodique par Gélation Ionotropique en Utilisant la Méthodologie
ID 1815 Plan Expérience
Souheila TOUATI, Rouquia Laghrib, Hanadi Laraib
Analysis of defects in enameled sheets from national industrial production
ID 1816
Fatiha keraghel
Structural Behavior of Self-Compacting Concrete Incorporating Recycled Aggregates
ID 1817
NADOUR Younes , BELABBAS Oualid , BOUZIADI Farid , HAMRAT Mustapha ,
BOULEKBACHE Bensaid
Micro-Defect Detection in Transparent Ceramics via Transmission Interferometry
ID 1818
Meziane Rahima, Abdelbaki Cherouana, Sofiane Bouheroum and Benaissa Salim
Numerical analysis of load transfer mechanisms in geosynthetic reinforced embankments
ID 1819 overlying localized weak zone
Fouad Berrabah and Sadok Benmebarek
Technical Analysis of Self-Compacting Concrete Incorporating Marble and Limestone
ID 1820 Powders
Ahmed Ragaa, Kamel Hebbache , Cherif Belebchouche
Influence of Black Silicon Morphology Combined with FSF/SiO₂/SiNx Layers on Optical and
ID 1822 Electrical Properties for Photovoltaic Applications
Nabil Khelifati
ETUDE DE LA FIXATION DU Ni 2+ ET Cr 3+ PAR LA RESINE ACIDE PARA-
1823 AMINOBENZOIQUE-FORMOL.
MAHI Ahmed
ID 1447 Effect of stress triaxiality on damage Initiation in the DC04 metal steel
Mohamed Lamine Mechenene, Mohamed Zaaf, Nedjoua Matougui, Oualid Chahaoui
ID 1452 Application de la méthode des éléments finis hiérarchiques à l’analyse vibratoire d’une plaque
composite à rigidité variable (CSRV), composée des fibres curvilignes (hyperboliques)
Amine Bendahmane, Djamel Bennacer
ID 1455 Analyse vibratoire d’une plaque composite à rigidité variable (CSRV), constituée des fibres
paraboliques par la version p de MEF.
Amine Bendahmane, Djamel Bennacer
ID 1456 Influence de l’interaction fluide structure sur le comportement vibratoire d’une plaque
composite à rigidité variable (CSRV) immergé dans un fluide.
Amine Bendahmane, Djamel Bennacer
ID 1457 Optimization of Magnetic Field Strength for Maximum Heat Transfer in Ferrofluid-Based
Cooling Systems
Abdelaziz Boumaiza
ID 1458 Engineering Efficient Fault Detection: A Data-First Approach to YOLO Model Selection
Ibrahim Chakkem, Boubakeur Zegnini, Mohamed Ayoub Sahnoune
ID 1480 The influence of the filler rate (CaCO3 ) on the mechanical properties of HDPE
Houria SACI, Salima BOUTERAA
ID 1498 Modélisation du contact mécanique soumise d'un mouvement oscillatoire de faible amplitude
SEHOUL Mohammed, SEHOUL Baghdad, BENDAHANE Khaled, BOUGUENINA Otbi
55
ID 1506 Hyperparameter-Optimized Models for High-Accuracy Transmission Line Fault Classification
Zakaria Belloula
ID 1529 Comparative Simulation Study of a Trapezoid-Type Stick-Slip Piezoelectric Linear Actuator
Using Right Circular Flexure Hinge
Naima Touati
ID 1535 Ensuring stability in construction through high-quality concrete.
sara NEDJAHI
ID 1547 Fuzzy-Based Event-Triggered Control under Deception Attacks
Djedjiga Brai, Fayçal Bourahala, Mohamed Rouamel, Ahmida Zahir
ID 1559 Impact of block model dimensions on mineral resources estimation
Hassina Foufou, Tayeb Serradj
ID 1593 Detection of stator short circuits in a self-excited asynchronous generator for wind power
conversion systems
FARES BELYNDA
ID 1598 Deep And Handcrafted Feature Fusion System For Diabetic Retinopathy Classification
Abderaouf Moustari, Youcef Brik, Bilal Attallah
ID 1608 Investigation of Terminal Velocity of Falling Liquid Droplets in Water
bochra djoudar, Mebarki Oussama, Mohamed Abdelouahab
ID 1614 ………………………………
Bouricha Nahla, LOUNIS MOURAD, MENAD MOHAMED
ID 1620 Performance Evaluation Of Fractional Order Sliding Mode Control For Induction Motor
Dalal Zellouma
ID 1622 Smart Elevator Prototype Based on Arduino and RFID
Mounir KRAZDI, Ikram HADDOUCHE, Abdelkader GARMAT
ID 1624 Effects of Distilled Water and Condensate Additions on the Viscosity and Flow Behavior of
Algerian Crude Oil
abdel hakim Kherief nacereddine, Omar Kholai
ID 1631 A DC Motor Drive Based on Single-Phase Full-Wave Rectifier with Cascade Speed Control
Younes Siradj, Elhachemi Mammeri
ID 1638 Simulation of Al/GeSn/Al photodetector for short wave infrared applications.
Abdelaziz Lazzaz, Khaled Bousbahi, Mustapha Ghamnia
ID 1664 Electrocoagulation as a Sustainable Pre-treatment Technique for Seawater Desalination: A
Parametric Study.
Abla ZOUAI, Souad BOUAFIA, Yasmine AIT OUAISSA, Malika CHABANI, Roumaissa
CHOUIEB
ID 1666 Fractional-Order Simplified Super-Twisting Algorithm for Multi-Rotor Wind Power Systems
Habib Benbouhenni, Hamza Gasmi
ID 1667 Optimized Control of a Mobile Manipulator Using a Fractional-Order PID Controller and
Particle Swarm Optimization
Malak MAOUCHE, Abdelkader GARMAT
ID 1683 Polymer Nanocomposites for 5G mmWave Applications: A Comprehensive Review
Mohamed Zellat
ID 1692 Broadband Terahertz Metamaterial Absorber with Polarization-Insensitive and Angle-Stable
Performance
ghada mebarki
ID 1695 Improving Thermal Efficiency in Buildings Using Solar Chimneys and Mixed Convection
Strategies
KALFALI Mahmoud
ID 1702 2D Modeling of a Planar Permanent Magnet-induced Eddy Current Braking Device
Bouchra Hania DAOUDI, Youcef OUAZIR, Mohamed MESSADI
ID 1715 Robust Super Twisting Sliding mode Control for Chattering reduction of Asynchrone Double
Star motor DSIM
Hadji Chaabane
ID 1717 Dynamic Precision Enhancement of 3-DOF Robotic Manipulator Using Computed Torque
Control
Nabil ISSAAD, Abdelkader GARMAT, Kamel GUESMI
ID 1757 Development of a Prototype for Automatic Date Marking on a Conveyor Line

56
 Rahma BENAZIZ, Ahlem BOUNABI, Abdelkader GARMAT
ID 1758 Ultra Compact Pass-Band Filter, Based On HMSIW Technic, Designed for mm Waves
Applications
Khier BENDERRADJI, Idris MESSAOUDENE, boualem HAMMACHE
ID 1765 An Orthogonal Approximate Discrete Tchebichef Transform for Image Coding in WVSNs
zidani nesrine, Doghmane Noureddine, Bouaziz Houda

10:00– 14:00 Online Session | wednesday, April 11th, 2025

Room 6 | Mechanical and Civil Engineering |meet.google.com/bki-hsic-jwk
Online Session Chairs:
ID 377 Numerical investigation of the first hydrodynamic and thermal instability appearance in a
horizontal Taylor-Couette system under differential heating
Ikram Redjaimia, Sofiane Touahri, Toufik Boufendi
ID 381 Amélioration de la perméabilité des sols des berges du barrage poids par injection de coulis
cimentaire.
KHEDIM Imane
ID 389 Numerical Analysis of PCM Melting Behavior in a Confined Enclosure with a Heated Vertical
Wall Using COMSOL Multiphysics
Ezzine Bennour, Ahmed taibaoui, Said Azzi, noureddine kaid, cheikh kezrane
ID 418 Numerical simulation of volatile organic compounds (VOCs) diffusion in building materials
NAIMA FEZZIOUI, Méberika Benyamine, Smail Boumedyen

ID 428 Free vibration analysis of nanocomposite doubly curved shells reinforced with carbon nanotubes
using a new integral high-order shear deformation theory
Mohammed Houssem Eddine Guerine, Zakaria Belabed
ID 445 Lane Keeping Fault Tolerant Control Based on Nonlinear MPC
Mohamed Achraf Senoussi, Aimen Abdellah Bouaiss, Bacha Aymene, Mohamed Boumahrez

ID 490 Modeling the Flexural Bearing Capacity of an Off-axis GFRP Waste-Based Core Using Hashin
Damage Criteria
Mohammed MEDDOUR, Souad AIT TALEB, Abdelmadjid SI SALEM
ID 494 Seismic Isolation Design Using Lead Rubber Bearings: Application to Algerian Code
(RPA99’03) Standards
BRAHIM ATHAMNIA, Mohamed Zohair KAAB
ID 495 Seismic Behavior of Base-Isolated Irregular Structures with Variable Lead Rubber Bearing
Damping
BRAHIM ATHAMNIA, Mohamed Zohair KAAB
ID 580 Effect of different activations of Supplementary Cementitious Materials (SCMs) on the
rheological properties of quaternary mortars
Hichem BERKAK, Ali ABBACHE, Moustafa Habib CHENAFI, Zoubir MAKHLOUFI, Madani
BEDERINA
ID 593 Analyse des régimes de fréquences propres d'une nanopoutre en époxy graphite sous l'effet
d'une déformation transversale
hamzi souad
ID 600 Control Design of Takagi-Sugeno fuzzy systems: Conservatism reduction using line integral
Lyapunov function
rabiaa houili, Mohamed Yacine Hammoudi, Marah Bacha, Abdenacer Titaouine
ID 613 Impact of Graphene on Microelectronic Component
Lounas BELHIMER, Nadia Bouaziz, mohamed Djouder

ID 633 Numerical Simulation of the Influence of Cohesive Length on Crack Propagation by Using
Fredholm Integral Equation
Ikram Slamani, Hicheme Ferdjani

57
ID 641 A Novel Higher-order Shear Deformation Theory for Predicting the Bending and Free
Vibration Responses of Thick Isotropic Plates
DJIDAR Fatima Zohra, DERRAS Abdelhak, HEBALI Habib
ID 642 A Novel Refined Plate Theory for the Free Vibration Response of Functionally Graded Plates
Resting on a Winkler–Pasternak Elastic Foundations
DERRAS Abdelhak, DJIDAR Fatima Zohra, HEBALI Habib
ID 696 Study on the Buckling Response of Functionally Graded Plates Employing a New Four-Variable
Refined Plate Theory
HEBALI Habib
ID 704 Numerical Modelling of RC Structures Considering Soil Variability and Static Soil-Structure
Interaction
Kamel BEZIH, Mohamed DJANENE, Mohamed LAOUCHE
ID 727 Comparative Study of two finite elements performance for Pinched Hemisphere Shell Analysis
Yasmine Merah, Djamal Hamadi, Kaddour Mouattah

ID 765 Comparative Analysis of Turbulence Models for Optimized Performance in Shell-and-Tube

Heat Exchangers with Circular and Elliptical Tube Geometries
sara SAHRANE, Slimane NIOU
ID 825 Numerical Investigation of Flow Separation and Turbulence in Laval Nozzles Using CFD
Merdassi Mustapha, Aouissi Mokhtar

ID 1026 Impact of Glass Fibers on Desiccation Cracking in Clayey Soil

Afaf Zeroual, Amina MASMOUDI, Ahmed BOUAZIZ, Sadok FEIA, Abdelali DADDA

ID 1075 Durability assessment of geosynthetics in aggressive environments: Insights from accelerated

aging tests
Linda Naga, Mohamed CHIKHOUI, Lynda DJERBAL
ID 1108 Étude numérique de l'influence de la géométrie du mur sur le comportement des murs en sol
renforcé par géosynthétiques
Ali Farik, Abdelfattah Aouadj
ID 1149 Investigation of Ecological Concrete for enhanced Thermal Insulation: a literature review.
djahida cherrallah, nadia lakreb

ID 1219 Eco-Efficient Shear Connectors for Steel-concrete Composite Structures: Reinforcement Design
in C-Shaped Perforated Angles
Nafissa Sakhri, Abd Nacer Touati Ihaddoudène, Messaoud Saidani, Da Costa Neves Luis Filipe
ID 1316 L’Étude expérimentale du renforcement biologique des sols sableux : Application aux sols
affaissables. Approche en laboratoire et sur site.
Meriem Selmi, Nassima Bakir, Sadok Feia
ID 1324 Application de l’intelligence artificielle pour la prédiction de la flèche des poutres métalliques
AbdelMoncef Hamedi

ID 1368 Impact de la variation de l’épaisseur et de la forme du gousset sur le comportement des

assemblages en profilés formés à froid
abdenour serdoun, nadir boumechra, abdelghani missoum
ID 1537 Effect of superplasticizer type on the mechanical and hydration properties of sulfate resistance
Portland cement
Kaci Chalah, Abdelbaki Benmounah
ID 1580 Numerical Modeling for Seismic Response Prediction of Pumice Masonry Structures: A
Validation Study
Boudjamaa roudane, Khedidja Himouri
ID 1748 Revue de littérature sur les matériaux de substitution au ciment pour des applications durables
en construction
Meriem Ouchenane, Samy Mezhoud
ID 382 Mechanical Behavior of Kevlar/Epoxy Composite Laminates
Adel DELIOU
ID 407 Experimental Evaluation of Stiffness and Damping in Carbon and Hybrid Carbon-Jute
Composite Plates
Rabab Zaoui, Hamza Mechakra
58
ID 430 Genetic Algorithm Code to optimize the geometric parameters of composite laminate
Hanane KHOUAS
ID 497 Impact de l'accélération sismique sur la réponse dynamique du barrage en terre de Ouarkiss
Tarek SEGHIR, Ali FOURAR, Ammar DEFFAF, Mehdi SEGHIRI, Abdelatif ZEROUAL, Mehdi
AMIOUR
ID 515 Review of pathologies of open-pit mining works, case study of aggregate quarries in the wilaya
of Sétif
Anissa MAHLEB
ID 547 Seismic Resilience of bridges
MOHAMMED ABDELLAOUI, mohamed badaoui, Mahmoud bensaibi, said koriga
ID 587 Amélioration des caractéristiques physico-mécaniques des bétons à hautes performances par
l'ajout du sable de dune broyé
Noureddine AGHA, Abdelkadir MAKANI, Ahmed TAFRAOUI, Fatima Zahra RENNANI
ID 590 CONTRIBUTION DES FINES DES GRANULATS RECYCLES ISSUS DE DEMOLITION
AUX PERFORMANCES MECANIQUES DES BETONS AUTOPLAÇANTS
Abdelhafid Sadok, Ahmed Tafraoui, Abdelkadir Makani
ID 848 Fatigue crack growth modelling within very high cycle range of the high-strength Chromium
steel
Abdelhak Nehila, Abdelmalek regad, Mohamed IKHLEF CHAOUCH, Wei Li
ID 850 Design and Performance Evaluation of Micro-Blade Configurations for Flow Control in Axial
Compressor: Part ІІ
Oussama Hachelfi, Riyadh Belamadi, Naouam Boudinar
ID 857 Numerical simulation of aiding and opposing double diffusive convection under different
directions of uniform magnetic field
Hamza BENNICHE, Said BOUABDALLAH, Aissa ATIA
ID 867 Numerical study of the bearing capacity of shallow foundations adjacent to sloping grounds
Mohamed El Hadi ZOBIRI, Cheima Bouraoui, Mohamed Saddek Remadna
ID 871 Seismic Soil-Structure Interaction: State-of-the-Art Modeling Approaches and Their
Implications for Building Design
Souheyla Saddouki, Mohamed Saadi, Djarir Yahiaoui
ID 873 Comparative Study of Fluid Viscous Dampers and Shear Walls for Seismic Optimization of
Reinforced Concrete Buildings
CHAFAI Hamid, TELMAT Djallal Eddine, IHADDOUDENE Abd Nacer Touati
ID 877 Free vibration analyses of antisymmetric laminated graphene reinforced functionally graded
plates
Nabila Ahlam,Yasser ,Mourad ,Mouloud Boukhalkhal,Chiker,Bachene,Guemana
ID 882 Validation of Finite Element model for FRP-Retrofitted Beam-column Joint Using the Grooving
Method
BOUROUMANA Issam, NAFA Zahreddine, NIGRI Ghania
ID 897 Sustainable Cement Development: Cenospheres Integration in LC3 Self Compacting Mortars
Systems
Slimani Yasmine
ID 910 Effect of Rough Minor Bed and Positive Slope on Hydraulic Jump Relative Length: An
Experimental Study in a Composite Rectangular Channel
Ibtissam HERRI, Samir KATEB, Ali GHOMRI, Djamel BESSER, Haroun KHECHIBA
ID 917 Geometric Optimization of Internal Fins for Improved Melting Performance of Nano-Enhanced
PCM in Thermal Energy Storage Systems.
Benyahia ilias, aissa abderrahmane, Mellah Hocine
ID 923 Mechanical behaviour of mortars incorporating brick waste at elevated temperatures
Houssam Eddine Abdelli, Salim Kennouche, EL Mouatez Billah Boudjellal, Abdelhamid Karouche,
Seifeddine Tabchouche
ID 935 Optimiser les performances du béton léger grâce à la valorisation des déchets industriels.
Lylia Meziane, Ahmed Ziregue, Belkacem Ziregue, Youcef Ghenrouti
ID 947 Modelling of three-dimensional beams using the 8-node hexahedral element: Abaqus
implementation
Lazhar Derradji, Toufik maalem, Tarek Merzouki
ID 971 In-Plane Compressive Behavior and Failure Mechanisms of GFRP Laminates

59
 Amina MASMOUDI, Afaf ZEROUAL, Ahmed BOUAZIZ, Abdelhak KHECHAI, Yassine ADIMI
ID 985 Comparaison des modèles analytiques prédisant la résistance à la compression des polymères
renforcés de fibres de carbone « PRFC »
nadia, sarra, Riad, Mohammed diboune, Sendjasni, Benzaid, Berradia
ID 1016 A Numerical Modeling of Large Penetration of Pile in Soils Using a Friction-Contact
Formulation
Ihab Bendida Bourokba, Nazihe Terfaya, Abdelmadjid Berga
ID 1020 ‫تأثير المواد على تخفيف الضغظ في بطانات األطراف االصطناعية السفلية‬
AICHOUBA adda cherif, MOULGADA Abdelmadjid, GUERCHOUH Nawel
ID 1022 Manufacturing Construction Materials from Industrial Waste: Towards Sustainable
Valorization of Residues
Sara Imane ZEGHINA, Walid KHELIFI
ID 1045 CFD Analysis of Paddle Impeller Stirred Tanks: Influence of Blade Height on Mixing
Performance
Ilhem Aicha AZZOUZ, Youcef KAMLA, Zied DRISS, Ghizlene Rahma RENNOU
ID 1048 Free Vibration Response of Cracked Composite Plates: A Comparison Between Conventional
and CNT-Reinforced Structures
Samah Maoudj, Rachid Tiberkak
ID 1062 Revue scientifique sur le développement de la technologie de chauffage de l'acier sous vide suivi
d'une trempe à l'air haute pression
Noureddine< Kacimi, Abdelmalek Regad
ID 1072 Regression Models for Predicting Shear Strength Contribution of Fully-Wrapping FRP in RC
Beams
Zahira Sadoun, Riadh BENNAI, Hassene AIT ATMANE
ID 1077 Comportement mécanique d’un tronçon en Té avec 4 boulons par rangée
HAOUAS Samira
ID 1083 Numerical Evaluation of Crack Propagation Using the J-Intégral in Composite Plates with
Circular Holes under Mode I Loading
Regad Abdelmalek
ID 1120 Leveraging Knee Biomechanics and Deep Learning for Improved Osteoarthritis Screening
KHADIDJA MESSAOUDENE, KHALED HARRAR
ID 1125 Analysis of Soil-Pipe Interaction: Estimating the Winkler Modulus of the Supporting Soil
Chahrazad BACHA, Meriem Zoutat, Mohammed Mekki
ID 1174 Modelling the Influence of Injection Modes and Hydrodynamic Forces on Particle Retention in
Porous Media
Kheira Bouragaa, Lyacine Bennacer, Nasre-Dine Ahfir
ID 1183 Numerical Analysis and Thermal Performance Assessment of a Heat Exchanger for Compact
Energy Applications
ABDELFATAH MARNI SANDID, Bourhane Bouhabel, Mahmoud Makhloufi, Fethi Moussa
Boudjema, Salim Eutamene
ID 1184 Numerical Study of Heat Transfer Enhancement in a Cross-Flow Heat Exchanger Using semi
eliptical fins
bourhane bouhabel, Abdelfatah MARNI SANDID, Zouhair aouissi, Ilyes Abacha, Salim Eutamene
ID 1195 MANUFACTURING OF CONCENTRIC HDPE-100 CYLINDRES TO ACCESS
MECHANICAL PROPERTIES DISTRIBUTION THROUGH WALL THICKNESS
SOUMIA BOUCHAKHCHOUKHA, LATIFA ALIMI, KAMEL CHAOUI, YOUSRA BOUGHAZI,
YOUNES MENAIL
ID 1231 Biomechanical Modeling of An Osteoporotic Femur with and without Implantation of a Total
Hip Prosthesis
Benkouachi Narimane, zagane mohammedelsallah, moulgada abdelmadjid
ID 1244 Flexural performance of sandwich composite structure :Density and Cell configuration effect .
Marwa Barberis, Layachi Boussouar, Yazid Fizi, Benoit Vieille
ID 1248 Investigation of Stress Response in the Beni Bahdel Dam Due to Transient Interaction with Its
Rock Foundation
Daoudi Mohammed Habib, Tahar Berrabah Amina
ID 1275 Multivariable Linear Regression Analysis for Elastic Modulus Prediction in Rubber-Modified
Cement Composites: Balancing Model Accuracy and Overfitting Risks
60
 Djallal Eddine TELMAT, Hamid CHAFAI, Madina KILARDJ
ID 1307 Evaluation of the safety coefficient of an earth dam as a function of foundation depth and
seismic zones.
BELAZOUZ LYNDA, BOUZELHA KARIMA, HAMMOUM HOCINE
ID 1310 Phase-Field Modeling of Quasi-Static Crack Propagation.
Azzaz Torkia, HACHI BrahimElkhalil
ID 1325 Effet synergique de la poussière de four à ciment (CKD) et de la poudre de verre (PV) sur les
performances du mortier autoplaçant : approche par plan composite central (PCC)
Redha Hammouche, Cherif Belebchouche
ID 1328 Investigation of Intermittent Microwave Drying of Wood Materials
Marwa BEDJAOUI, Salaheddine AZZOUZ, Soufien AZZOUZ
ID 1351 Évaluation de l’applicabilité du modèle Concrete Damage Plasticity (CDP) à la maçonnerie
Said Idekki, Souad Ait Taleb, Abdelmadjid Si salem

ID 1359 Rapid Estimation of Secondary Creep in Soft Clays Using Machine Learning
Hachimi Dahhaoui
ID 1361 Pressure effect on Thermal Contact Resistance (TCR)
CHERIET Rahmouna, BENSAAD Bourassia, BOUHADJELA Fatiha, BELHENINI Soufyane
ID 1448 Biomechanical Analysis of Contact and Shear Stresses in Transfemoral Prosthetic Liners Using
Finite Element Methods
Guerchouh Nawel, Moulgada Abdelmadjid, Sahli Abderahmane, Aichouba Adda Cherif, Zagane
Mohammed El Sallah, Boudjemaa Ismail, Ghouari Lahcene
ID 1490 Optimisation mono et multi-objective des paramètres de coupe lors de l’usinage de l'acier AISI
D2 en utilisant la lubrification MQL
ALLAL Mohammed, BELHADI Salim, YALLESE Mohamed Athmane
ID 1511 Heat transfer during melting of phase change material inside a spherical capsule
Fatiha Chebli, Farid Mechighel
1516 NUMERICAL MODELLING OF CFRP REINFORCED RC BEAMS ANCHOREDWITH
INCLINED FRP STRIPS
Abderrahmane Abdesselam, Tarek Metrouni
ID 1523 The Influence of the Inter-disc Cavity Inclination Angle on Cooling Efficiency
Aya Rehab Bekouche, Riyadh Belamadi, Djihane Mazouz
ID 1542 Numerical evaluation of composite patch effectiveness using XFEM and CZM
Mohammed BENYETTOU, Kouider Madani, Mohammed Walid Harmel, Kamel Zouggar, Sarra
Mama Nor El houda Boussahra
ID 1557 Material Influence on the Dynamic Response and Flexibility of Cable-Driven Continuum Robots
Djedili AMEL
ID 1558 An Automated Framework for Optimizing 3D Concrete Frame Structures According to
RPA2024
Nassim Djedoui, Nesreddine Djafar-Henni
ID 1560 Kinematic and Control Analysis of a Three-Section Dual-Cross Continuum Robot
Djedili AMEL, Amouri Ammar
ID 1595 Effect of Composite Substrate Properties on Von Mises Stress Distribution in the Adhesive of
Aluminium–Composite Joints
TOUATI BENALI ABDELAZIZ, ACHACHE HABIB
ID 1636 Optimizing Water Absorption and Workability for new bio-based material : Barley Straw-PCM
Gypsum composite .
KHADIDJA KEHLI, BELKACEM BELHADJ
ID 1637 Entropy Generation Due To Mhd-nanofluid Mixed Convection Within a Lid-Driven Cavity
Shaped L
Chihab Eddine BRAHMI, Mouna MAACHE, Nourredine BELGHAR, Mahmoud KALFALI
ID 1644 Mhd-nanofluid Mixed Convection inside a Lid-Driven Cavity Shaped L
Chihab Eddine BRAHMI, Mouna MAACHE, Nourredine BELGHAR, Mahmoud KALFALI
ID 1646 Numerical study of the vibration of steel beams under temperature conditions
AFAF TOAIBA
ID 1649 Performance of Three-Dimensional Finite Elements for the Analysis of Stiffened Shell
Structures
61
 Maria legouirah, Djamal Hamadi, Abdulrahman A-Nadhari
ID 1671 Synthesis of an Eco-Material Geopolymer Based on a Natural Waste
Mohamed Salah MOUAISSA
ID 1711 CFD Analysis of Cooling Configuration Optimization for High-Pressure Turbine Vane.
Djihane MAZOUZ, Salaheddine AZZOUZ, Aya REHAB BEKOUCHE
Application of the Discrete Kirchhoff-Mindlin Quadrilateral (DKMQ) Element for Free
ID 870 Vibration Analysis of Thin and Thick rectangular Plates coupled with stationary fluid
DJELLOUL BENTRIA, RASSIM BELAKROUM, Fodil Hammadi

10:00– 14:00 Online Session | wednesday, April 11th, 2025

Room 7 | Metallurgical and Materials Engineering | meet.google.com/cvf-eafo-epa
Online Session Chairs:
Ferroelectric and Piezoelectric Properties of Sm-Doped PZT Ternary Ceramics for Advanced
ID 391
Functional Applications
Ahlem Ksouri, Abdelhek Meklid
Thermal, Optical, and Structural Analysis of LDPE Modified with Copper and Zinc Additions
ID 423
Jihad GUENDOUZ, Mohamed BELHAMIANI, Wahid OUDAD
Influence of salinity on the corrosion resistance of an austenitic stainless steel AISI 304 L.
ID 431
Djedjiga Ben Abdesselam, Youcef Hadjali, Belkacem Korichi, Nacer Zazi, Fatah Hellal
Analyse de l’impact environnemental des opérations d’abattage dans la mine de phosphate de
Kef Essnoun, Nord-Est de l’Algérie.
ID 531
Abdelhak TABET, Toufik Batouche, Oussama ZERZOUR, Halima Saadia ZANOUDA, Ali
Ahmed Benyoucef, Kamel MENACER
Predicting Perovskite Structures: An AI-Powered Approach Using PCA and RFR
ID 537
touati soundous, Hebboul Zoulikha, Benghia Ali
Recovery of Iron, Cobalt, and Nickel from Metallic Hydroxide Sludge via Selective leaching
ID 596 and Precipitation
Chahrazad AMRANE, Afaf LALMI, Sabrina TAMERSIT
High-Resolution Crack Detection and Localization in Stainless Steel Structures Using Rayleigh
ID 621 Wave EMAT
Houssam Boughedda, Hemza Gheddar, Sid-Ahmed TOUIL
Surface Defect Detection in Metals Using YOLOv11n: A Computer Vision Approach Based on
ID 625 Artificial Intelligence
Bouhelassa Yassine, Benazzouz Younes
Optimisation géométrique des joints collés : effet du biseautage et du bourrelet d’adhésif sur la
ID 652 résistance mécanique
Rachid Hadj boulenouar, Noureddine Djebbar, Benali Boutabout, Hasna Hadj boulenouar
Electrochemical behavior of porous TiNi50-xCux alloys
ID 738
zineb SADAOUI, Latifa Kahloul, soumaya Meddah
Influence of Electrolyte Composition on the Anodization of AA5083 Aluminum Alloy.
ID 757
Meryem ACILA, Loubna MERABET, Feyrouz NAFA
Corrosion Resistance of Zinc and Copper Coatings Obtained by Thermal Spraying : A
Comparative Study
ID 806
Nesrine KHERBA, Sarah Boudjit, Younes Rassim, Mohand amokrane Bradai, Giuseppe
pintaude
An approach to reliability for high-density polyethylene gas pipes under aggressive ageing
ID 831 phenomenon
Khaoula Berkas, Sabrina Mammeri, Kouka Bouslah, Kamel Chaoui, Abdelaziz Amirat
Effet du champ magnétique sur les propriétés anticorrosion des couches d'oxyde obtenues par
ID 1055 anodisation de l'alliage d'aluminium 5083
Feyrouz NAFA, Hakim BENSABRA, Jean Paul CHOPART
Experimental study of the effect of resistance spot welding parameters on the mechanical
ID 1056
properties of heterogeneous steels.

62
 Fouad Ternane, Mustapha Benachour, Fethi Sebaa
Multi-Objective Optimization of GTAW Dissimilar Welding of Stainless Steels Using Grey-
ID 1094 Based Taguchi Method
Ayman KHALED, Youcef REDJEB, Ahmed KELLAI, Abdeldjebar HADJI
Optimization of Hot and Cold Rolling Process Using Design of Experiments: Hydrodynamic
ID 1107 Modeling, ANOVA Analysis
DERREZ MIMOUNE, Traiaia Noura
Experimental Investigation of Fracture Toughness in Aluminum Alloy AA3003 Welded by
ID 1119 Friction Stir Welding Using the Essential Work of Fracture Method
Hichem MEBARKI, Abdelmalek Regad, Hamida FEKIRINI
Characterization of Friction Welded Joints between AA 2017A Aluminum Alloy and AISI 316L
ID 1132 Stainless Steel
Fares Khalfallah, Laid Mahdi, Elhadj Raouache, Razik Benderradji
Mechanical properties of Fe-C-Mn-Si-Al alloy steel
ID 1161 Alimi Latifa, Boulkra Mohamed, Boukhezar Skander, Sehab Nadjette, Sassane Nadjette,
Oudjertli Salah, Manail Younès, Chaoui Kamel
Surface treatment of metal alloys by physical vapor deposition (PVD)
ID 1241
Salim ABDELLI, Djamel AMARI, Youcef KHELFAOUI, Khaoula RAHMOUNI, Nadia SAOULA
Modeling the ultrasonic wave’s velocity dependent on temperature-porosity in metallic
ID 1279 materials
Farah Hamdi
First-Principles Insights into the Structural, Electronic and Thermoelectric Properties of GaNi1-
ID 1288 xTaxSb Half-Heusler Alloys
Bouchentouf Mohamed amine
Mineralogical and Elemental Characterization of Phosphate Tailings from Djebel Onk
ID 1395
Rim Amata, Mohamed Bounouala, Amar Amata
Investigation of Alternative Substrates in EBT3 Film Electron Dosimetry
ID 1402
Asma Farah, Rebiha Labbani
Blood dynamics and complex properties of flow within atherosclerotic arteries with varying
ID 1428 hematocrit.
Badr eddine BEHIR
First principal investigation of structural, electronic and magnetic properties of transition metal
ID 1431 oxides alloys
Kalthoum Klaa, Yacine Benguerba, Mohamed Bououdina
Performance analysis of composite patch repairs under the effect of theageing process
ID 1550 Mohammed Walid Harmel, Kamel Zouggar, Mohammed BENYETTOU, Kouider Madani,
Sarra Mama Nor El houda Boussahra
Sustainable PHBV Biocomposites Reinforced with Spanish Broom Fibers: A Green Alternative
ID 1554 for High-Performance Applications
Amel ABALACHE, Idris ZEMBOUAI, Naima TOUATI, Lynda ZAIDI, Stephane BRUZAUD
The effect of a composite patch on the behavior of mixed-mode cracks
ID 1562 Sarra Mama Nor El Houda Boussahra, Kouider Madani, Mohammed BENYETTOU,
Mohammed Walid Harmel, Kamel Zouggar
Insight view of Y2MnAl Heusler material via DFT calculations: A study on structural, electronic
ID 1588 and magnetic properties
Chahrazed Zouaneb
Numerical Simulation of Laser Shock Peening on A357 and A2024-T351 Aluminum Alloys:
ID 1627 Analysis of Compressive Residual Stresses
Naoum Halima, Fekirini Hamida, TAYEBOUN LAMISSE, MEBARKI HICHAM
Impact of porosity defects on the thermomechanical performance of ceramic/metal interfaces
ID 1677 in multilayer structures
Ahmed Mehdi Zaoui
Effect of Basicity on Thermal Behavior of Iron Ore Powder
ID 1755
Nassima Chebel, Djamel Nettour, Mohamed Chettibi
ID 1127 HOMOGENIZATION PROBLEM OF TWO WEAKLY CONNECTED MATERIALS
63
 DEHAMNIA Abdelhakim
Rare-Earth Doped Oxyfluoride Glasses for X-ray Imaging Applications
ID 388
Kinoucha Khalida
Electrochemical Characterization of Activated Ni-Zn Alloy Coatings for the Hydrogen
ID 441 Evolution Reaction via Water Electrolysis
Sofiane Latreche, Naima Boutarek- Zaourar, Faouzi Messaoud, Samir Mansour
Comparative Study of the Effect of Coolant, Water, and Distilled Water on the Corrosion of
ID 503 AlSiMn Aluminum from an Automotive Radiato
YOUCEF HADJ-ALI, BELKACEM KORICHI, DJEDJIGUA BENABEDESSELAM, NACER ZAZI
Effect of milling time on Crystalline Disorder and Magnetic Performance in TiFe Alloys
ID 529
Boutheina Beldi, hayette Saifi
Fatigue Behavior of Multifunctional Composites with Embedded Metallic Inserts: Influence of
ID 569 Insert Thickness
Imene BACHIR BEY, Fatiha SI AHMED, Samir Mansour
Assessment of Hardness in ZnAlCu/SiC Homogenized Composite
ID 616
Faiza Lourdjane
Assessment of Hardness in ZnAlCu/SiC Homogenized Composite
ID 616
Faiza Lourdjane
Study of the structural, electronic, Magnetic and optical properties of NaSrXO (X=Ge,Si)
ID 842 Quaternary Heusler alloy: A first principal investigation
Sihem Fakhr Dine, Wiam Maafa, Charef Abbes, Samir Charef, Abdelkader Boukortt
From synthesis to Simulation: Experimental and SCAPS-1D simulation of ultrasonic spray
ID 911 pyrolyzed Cu2ZnSnS4 thin films.
Widad Menadi, Salim Kermadi, Lyes Zougar, Samira Sali
Experimental Optimization of Lanthanum(III) Extraction via Cloud Point Method Using
ID 932 C13E10 Non-Ionic Surfactant
SEFROU Zeyneb
Fretting Fatigue Behavior Study of a Bi-Material Bolted Joints (Steel-Aluminum)
ID 962
CHERIET Nour El houda, BOUCHOUICHA Benattou, BENGUEDIAB Mohamed
Design of ku band substrate integrated waveguide coupler
ID 1018
Rahali bouchra
Computational Study of Novel Quaternary Heusler Alloys for Spintronic Devices.
ID 1110
Wiam MAAFA, Charef ABBES, Hanane SAIB, Abedelkader BOUKORT
the influence of heat treatments on casting defects of the AlSi13 alloy intended for industry
ID 1177
noura traiaia, abdennacer lemmoui
Using Self-Propagating Combustion to Produce High-Purity Silicon
ID 1189
Lamia DARSOUNI, Saida HAOULI, Amina GRAIRIA
Mechanical and Non-Destructive Evaluation of Rotary Friction Welded Joints between 316L
ID 1194 Stainless Steel and A60 Steel
Benfredj Amal, Raouache Elhadj
Fault detection and isolation of discrete event systems industrial
ID 1199 Ahmed Khalil MoussaouiAhmed Khalil Moussaoui Moussaoui, HIRECHE SLIMANE, HABBAB
MOHAMED
Analysis of the Mechanical Behaviour of Composite Materials
ID 1233
amel hammouya, ala djaariri, Ouail bekhouche, Rachid CHAIB
Ultra-Compact and High-Speed All-Optical OR/NOR Logic Gate Based on Nonlinear Photonic
ID 1240 Crystal Ring Resonator Switching
charik khalissa
Fatigue cracking in deep roller burnished an Al 2024 Alloy
ID 1266
Selma BELABEND, Hamid Hamadache, Seif eddine Bougoffa, Fathi Gharbi
Surface Roughness Optimization Using a Custom-Designed Burnishing Tool in Orthogonal Ball
ID 1273 Burnishing
Selma BELABEND, Hamid Hamadache, Ouahiba Taamallah, Nacer Mokas
PMMA in dentistry: mechanical properties, biocompatibility and clinical innovations
ID 1338
BENDELHOUM Zineb, MAHI Rawda, AZZOUNI Imene, BOUCHAOUR Mama
64
 Uniaxial Compression-Based Cold Forming of Powders: Evaluation of Compressibility
ID 1350 Coefficient
Souad Meftah
COMPARATIVE STUDY OF THE ELECTRONIC AND OPTICAL PROPERTIES OF THE
ID 1442 COMPOUNDS Na2ZnGe2S6 AND Na2ZnGe2Se6
Rekia MAHIAOUI, Tarik OUAHRANI, Abdelhak CHIKHAOUI
Development and Characterization of Reactive Powder Concrete: Experimental and
Numerical Approach
ID 1462
Nawal Siham ADAMOU DOUMI, Hadjila Bournine Amrane, Lamia Samah Ben saadi, Ali
Ahmed Benyahia
Hydrophilicity Enhancement and Aging Behavior of Polyethylene Treated with Argon
ID 1489 Atmospheric-Pressure Plasma Jet
Bedrouni Fatma, Ouchabane Mohamed, Saidi-Amroun Nadia, Almabouada Fateh
Realisation of an all-optical OR Logic gate based on nonlinear kerr effect with high speed and
ID 1569 ultra compact size
Charik Khalissa
Development of high-performance dental porcelain using local raw materials: Influence of
ID 1574 TiO₂ additions on densification and mechanical properties
Fayçal Aouadja
Effect of heat treatment on transformation temperatures in shape memory alloy CuZn26Al4
ID 1582
Mourad Benzemmouri
Development and Characterization of a ZnO-Modified Hydrogel for Environmental
ID 1669 Applications
Chouana Hadjer, Sehil Hafidha, Mimouni Amina
Thicknesses Effect on conventional and inverted organic solar cells ( OSC and IOSC
ID 1751 ): Comparison study
Maroua ABDALLAOUI, Doaa ABDALLAOUI, Sarra BARKAT

Online Session | wednesday, April 11th, 2025

10:00– 14:00
Room 8 | Nanoscience | meet.google.com/xfq-njfj-pzm
Online Session Chairs:
Unveiling the Electronic and Magnetic Properties of Sr2VMoO6 Double Perovskite: A First-
Principles Study
ID 380
Atika Guendouz, Khadidja Hadj Larbi, Abdelkader Nabatti Ech-Chergui, Kouider Driss-Khodja,
Bouhalouane Amrani
Computational determination of structural, electronic, magnetic and elastic properties of Rare-
ID 398 earth-based intermetallic compounds as potential spintronic materials
montaha affane, saadiya benatmane
In Silico Prediction of Drug Distribution in Liposome vesicles Using Molecular Modeling
ID 439 Fatma Zahra Hab, Anfel Benmanseur, Rechda Amel Tachour, Rania Derguine, Abdelmalek
Rezgui, Yacine Benguerba, Bachra Khettal, Widad Sobhi
First-Principles Insights into a Half-Heusler for Opto-Thermo Applications
ID 443
Lakhdar BENAHMEDI, Anissa Besbes, Radouan Djelti, Ali AISSANI, Sidahmed Bendehiba
Thermodynamic Properties of the Dunkl Harmonic Oscillator in d-Dimensions: Exploring
ID 489 Reflection Symmetry and Statistical Mechanics.
Lakhdar Sek, Issam Zaiz, Abdelmonem Miloudi
First-Principles Investigation of Ag Doping Effects on the Structural and Electronic Properties of
ID 618 Cu₂Mg₁₋ₓAgₓSnS₄ (x = 0.125–1.00)
Mohamed Amine Chenafi, Abdesselam Boucif, Kamel Demmouche
Chimisorption et détection de la phénytoïne sur le cluster Ga₃ : étude DFT, DOS, ELF et effet
ID 674 du solvant
Cheghib Nedjoua

65
 Étude ab-initio du ferromagnétisme dans les matériaux ferromagnétiques demi-métalliques de
ID 687 type binaire
montaha affine
Computational determination of structural, electronic, magnetic and elastic properties of Rare-
ID 688 earth-based intermetallic compounds as potential spintronic materials
montaha affine
Investigation of Structural, Elastic, Mechanical, Magnetoelectronic and Optical chracterestics of
ID 776 KMgNS Heusler alloy
Houssam Meghchouche, Malika Labidi, Abdelaziz Amara, Salima Labidi
First principle study of spintronic properties for double perovskites Ba2XMoO6 with X=V, Cr
and Mn
ID 887
Bouchentouf idriss Yasmine, Akham Amel, Bouhadjer Khadidja, mekhtiche manal, bouadjemi
bouabdellah, Matougui Mohamed
Study of The Correlation among Rydberg dressed atoms as a Probe into Quantum
ID 1002 Computation
Leila Chia, Nabila Grar
Study of the structural, electronic and optical properties of semiconductor compounds
ID 1326
oughidni hicham
Performance Enhancement of Solid-State Dye-Sensitized Solar Cells Using Niobium Pentoxide
ID 1331 (Nb2O5) Transport Layer: Numerical Study
Abdellah Benyoucef, Mousaab Belarbi, Oussama Zeggai, Abdessalem Bouhenna
Study of the structural, optoelectronic, magnetic and thermoelectric properties of double
ID 1366 K₂NaXBr₆ perovskites (X = Sc, Cr) for spintronic devices and optoelectronic applications.
mohammed Kheir Allah, Djillai Ben Said
An investigation of the electronic stucture and optical properties of doped tin oxide based on
ID 1411 first prinsciples
kelthoum Abdaoui
Structural, elastic, electronic, and optical properties of the cubic perovskites AVO3 (A=Ca and
ID 1510 La)
Fatima Nemla, Djellal Cherrad
Electronic and Optical Properties of Mn-Doped HgSe Topological Insulator for Spintronic
ID 1524 Devices
Nour el houda HABIBES, Abdelkader BOUKORTT
Electronic and Thermoelectric Response of Mg₂Si Compounds to Uniaxial Compression
ID 1599
Fatima Zohra BEHAR
Étude in silico des interactions ligand–acétylcholinestérase pour la conception de nouveaux
ID 1602 inhibiteurs
charif guiassa, sihem boudermine, Imen Ramli, Tarek Boudiar
First Principles Study Using Hybrid Functional Approach of the Physical Properties of Narrow
ID 1670 Band Gap ScxY1-xN (0 ≤ x ≤ 1) Solid Solutions
Nour El Iman Zeghoum, Said Lakel, Nozha El Ahlam Doghmane, Houssem Eddine Doghmane
Exploring the Thermoelectric Potential of Perchalcogenoborates via DFT-Based Analysis
ID 1685
fatima garadi
Enhancing the structure, stability and electronic properties of arsenic nanoclusters through
ID 1742 transition metal doping : Quantum chemical study
Chaouki SIOUANI, Sofiane MAHTOUT
Exploring Lead-Free Halide Double Perovskites Rb₂SrBiBr₆ and Rb₂ZrBiBr₆ for Optoelectronic
ID 517 Applications Insights from First-Principles Calculations
Abderrahmen Khalifa, Youssef Seksak, Ahmed Gueddim
Modilisation of electron-matter interaction
ID 701
Tarek Khatir, Salim Houamer
Efficiency enhancement of MoS2 solar cell with tungsten disulfide as HTL - a numerical
ID 703 simulation approach
Abdelbasset Rahmoune
ID 845 Catalytic and Electronic Properties of Low-Dimensional MoSeTe: A Density Functional Theory
66
 Approach.
Amina BOUHEDDADJ
Study by modeling of high-energy photonic beams interactions with matter
ID 854
Rebiha Labbani, Amira Bouhabila
Electronic structure and magnetic properties of AgMnO2 : DFT study.
ID 900
Ismahane Berrached, Ahlem Rahmani, Oussama Mahroua
A theoretical study of Fe(II), Co(II), Ni(II) and Cu(II) complexes with tridentate (NNO donor )
ID 1052 Schiff base ligand: structure , bonding and property
Noura Benhamada, Bachir Zouchoune
Effect of Confinement Geometry on the Self-Assembly of Magnetic Nanoparticles for Water
ID 1087 Purification
Lila Bouzar
Effects of Tilted Angles and Hartmann Number on Thermal Performance Factor Parameters in
ID 1133 Nanofluid Mixed Convection
Ayoub BENNIA, Sidahmed ALLICHE
Numerical modeling of the impact of fiber arrangement on Poisson’s Ratio ν12 of a
ID 1264 unidirectional CNT/polymer nanocomposite material
CHARAFEDDINE BENATMANE, SAMIR BREK, LAHCENE GHOUARI, TAKIEDDINE NAILI
First principal investigation of the halide substitution on the phonon instabilities in multi-
ID 1298 layered phases.
BENOMAR SARRAH, IBRAHIM ABDELLAOUI, DJANI HANIA
Monte Carlo Study of Magnetic Properties in Nano-Graphene Based on the Ising Model
ID 1332
Yazid Benbouzid
A comprehensive examination of structural and optoelectronic characteristics of ternary halide
ID 1341 perovskites AgXBr3 (X= Ca, Sr, and Ba)
Maroua Khenata, Abdelkader Dehbi, Abdelkader Belfedel
First-Principles Analysis Transition Metal Doped Ceria: Electronic, Thermoelectric, and Optical
ID 1355 Properties
BENMALEK Aida, Doghmane Mlika, Chettibi Sabah
Quantal study of the satellite features in the absorption spectra of Cs (6p ← 6s) perturbed by
ID 1389 Helium
Abdelaziz MOUSSAOUI
Theoretical study of BP/GeC van der Waals Heterostructures for High-Efficiency Solar Cell
ID 1398
Khawla Chaoui, Kamel Zanat
Comparison of Sheath Formation criterion in a Collisional plasma Between Boltzmann and
ID 1467 Nonthermal Electrons
ilhem bensaoucha, ammar mosbah
Growth behavior, electronic, magnetic and optical properties of pure Gen and doped SnGen
ID 1472 clusters and their applications: DFT simulation approach
Soumaia DJAADI
Investigation of structural, electronic and magnetic properties of doped Oxide Perovskite
ID 1613 BaZrO3, Ab initio study.
rahmani ahlem
On the Structure of Quantum States for Central Potential Systems via the Variational
ID 1628 Approach
Ouanassa Haif Khaif
Study of the Optical Properties of Tin Oxide Thin Films Synthesized Using Spray Pyrolysis
ID 1824
Halima HABIEB
Interaction of Non-Planar Dust Ion-Acoustic Solitary Waves in a Dusty Plasma with
ID 1825 Epstein Drag
S.Kadi
Hybrid Optimization of Interpolation Methods Using Particle Swarm
ID 1826 Optimization
Belkheir ZIANI
ID 1827 Breaking Efficiency Barriers: A Comparative Simulation of GaAs and BAs Solar Cells for
67
 Next-Generation Photovoltaics
Laarej Merad
Adaptive PID controller using Load Frequency Control with ANN and ANFIS algorithms
ID 1828
Benalia Nadia
Analysis of Cutting Speed Impact on Ceramic Tool Wear during Hardened Steel Machining
ID 1829
Faouzi Hamza
Modeling and Simulation of a Single-Stage Grid-Connected Photovoltaic System
ID 1831
Zerzouri Nora
Adaptive PID controller using Load Frequency Control with ANN and ANFIS algorithms
ID 1832
Benalia Nadia
Removal of anionic dye by adsorption on activated carbon
ID 1834
Khadidja Khalili
Investigation of the current-voltage characteristics of a InP nitride Schottky diode
ID 1835
Toumi Hayet

10:00– Online Session | wednesday, April 11th, 2025

14:00
Room 9 | Applied Ceramic Technology |meet.google.com/xfq-njfj-pzm
Online Session Chairs:
ID 427 Design and 3D Printing of Fluorohydroxyapatite Scaffolds for Biomedical Applications
AGSOUS Maissa, KHIREDDINE Hafit, YALA Sabeha
ID 938 Microstructural Characterization of Calcium Phosphate Bioceramic Powder
Djahida Sidane, Lila Ouzougoua, Nadir Slimani, Hafit Khireddine
ID 675 Studying the Physical and Biological Properties of Synthetic Diopside Derived from Local Dolomite
Souheila Zouai, Fatiha Guerfa, Fahima Zenikheri, Faiza Bouaïcha
ID 700 Predicting Dynamic Response of Functionally Graded Beams Resting on Winkler-Pasternak
Foundations
FOURN Hocine, Bennai Riadh, NEBAB Mokhtar, AIT ATMANE Hassene
ID 893 Wear resistance and surface damage of MgAl2O4 spinel ceramic after scratch exposure
Khadidja hoggas, Salim Benaissa, Mohamed hamidouche, gilbert fantozzi
ID 1354 A Theoretical Study Structural and Opto-electronic Properties of the Germanium Based
Halide Perovskite
AICHA bendjedid
ID 1369 Synthesis and characterization of ceramic superconductors
Harma Fatima, Belakroum Karima
ID 1662 Electrochemical synthesis and characterization of ZnO nanosheets on Al/Al2O3 for photocatalysis
application
Nawal Boukmouche

68
Publication
All accepted papers will be published in the conference proceedings.
For exceptional contributions, the best articles (will be considered for publication in
the prestigious, indexed international journals
1. Journal of Building Materials Science(JBMS) (SCOPUS indexed)
2. Journal Environmental & Earth Science (JEES) (SCOPUS indexed)
3. Research in Ecology (RE) (SCOPUS indexed)
4. Trends in Immunotherapy (TI) (SCOPUS indexed)
NB: Publication fees may apply
National publications:
1- International Journal of Automation and Safety (IJAS)
2- Recueil De Mécanique (RDM)

69