Scribd
Upload
3 views1 page

Assignment # 03

This document outlines Assignment #03 for the AML151 Engineering Mechanics course, detailing four problems related to forces and tensions in various mechanical systems. Students are required to determine forces and tensions for a lamp, cables attached to a plate, a crate supported by cords, and the vertical distance of a lamp from the ceiling. The assignment is due on 28/04/2021 and is graded out of a maximum of 10 marks.

Uploaded by

gameboy10t
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3 views1 page

Assignment # 03

This document outlines Assignment #03 for the AML151 Engineering Mechanics course, detailing four problems related to forces and tensions in various mechanical systems. Students are required to determine forces and tensions for a lamp, cables attached to a plate, a crate supported by cords, and the vertical distance of a lamp from the ceiling. The assignment is due on 28/04/2021 and is graded out of a maximum of 10 marks.

Uploaded by

gameboy10t
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DEPARTMENT OF APPLIED MECHANICS

Course: AML151 Engineering Mechanics


Assignment # 03
Date of Display: 24/04/2021 Maximum Marks: 10
Date of Submission: 28/04/2021 Instructors: Dr. Sachin Bakre & Dr. Sonal Dhanvijay

1. Determine the force F needed to hold the 4-kg lamp in the position shown in Fig1.

Fig1 Fig2

2. The ends of the three cables are attached to ring at A and to the edge of a uniform 150-kg plate.
Determine the tension in each of the cables for equilibrium shown in Fig2.

3. A 100 Kg crate, as shownin Fig3, is supported by three cords. One cord has a spring in it. Find the
tension in cords AC and ADand the stretch of the spring.

Fig3 Fig4

4. The 10 kg lamp in Fig4, is suspended from the three equal-length cords. Determine its smallest
vertical distance is from the ceiling if the force developed in any cord is not allowed to exceed 50 N.

You might also like