Scribd
Upload
6 views5 pages

Customer Stack Up

The document outlines the proposed stack-up for a PCB design, detailing the layers, materials, and thicknesses involved. It includes information on copper weight, dielectric constants, and impedance calculations for single-ended and differential configurations. Overall, the total thickness of the stack-up is 0.56667 mm.

Uploaded by

Benyamin Farzaneh Aghajarie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views5 pages

Customer Stack Up

The document outlines the proposed stack-up for a PCB design, detailing the layers, materials, and thicknesses involved. It includes information on copper weight, dielectric constants, and impedance calculations for single-ended and differential configurations. Overall, the total thickness of the stack-up is 0.56667 mm.

Uploaded by

Benyamin Farzaneh Aghajarie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Customer Stack-up

Proposed
Copper Thickness
Layer Structure figure Thickness
Weight (mm)
(mm)

Top Soldermask 0.01524


L1 l01_top.art 0.5oz+Plate 0.05004

Prepreg 0.10465
L2 l02_gnd1.art 2oz 0.0635
Core 0.10008
L3 l03_pwr1.art 2oz 0.0635
Prepreg 0.10465
L4 l04_bottom.art 0.5oz+Plate 0.05004

Bottom Soldermask 0.01524


Overall Thickness (mm) 0.56667
Stack-up Information
Single E
50ohm ±4
Reference
Structure Foil type Dk Df Customer
Layer
Design
LW(mm)

1/3oz+Plate H T E-PL. L2 0.1524


L2
L2
L2
L2
R5670K_1035*2 RC70 3.05 0.002
RTF
R1755V_106*2 RC71 3.68 0.019
RTF
R5670K_1035*2 RC70 3.05 0.002
1/3oz+Plate H T E-PL. L3 0.1524
L3
L3
L3
L3
Single Ended Single Ended
50ohm ±4.0ohm 55ohm ±4.4ohm

Customer
Calculated Calculated Calculated
Design
LW(mm) IMP(ohm) LW(mm)
LW(mm)

0.20066 50.00 0.12395 0.16256

0.20066 50.00 0.12395 0.16256


Ended Differential Differe
±4.4ohm 90ohm ±7.0ohm 100ohm ±

Customer Customer
Calculated Calculated Calculated
Design Design
IMP(ohm) LW/SP(mm) IMP(ohm)
LW/SP(mm) LW/SP(mm)

55.00 0.15875/0.24765 0.19558/0.21082 90.00 0.1016/0.1397


0.0889/0.10922
0.127/0.17272
0.127/0.254
0.1524/0.2667

55.00 0.15875/0.24765 0.19558/0.21082 90.00 0.1016/0.1397


0.0889/0.10922
0.127/0.17272
0.127/0.254
0.1524/0.2667
Differential
100ohm ±8.2ohm

Calculated Calculated
LW/SP(mm) IMP(ohm)

0.1143/0.127 100.00
0.09398/0.10414 100.00
0.13462/0.1651 100.00
0.15748/0.22352 100.00
0.1651/0.254 100.00

0.1143/0.127 100.00
0.09398/0.10414 100.00
0.13462/0.1651 100.00
0.15748/0.22352 100.00
0.1651/0.254 100.00

You might also like