An Industrial Automation Company

INDUSTRIAL INTERACE SOLUTIONS

Standard Relay Modules Solid State Relay Module

DC & AC Relay Module DC & AC Relay Module

with 1/2/4 C/O with with 2/4/8 channel with
fuse & fuse blown indication fuse & fuse blown
indication
Available in 2/4/8/16/32
channel

Moduler Wiring Solution

Available for Digital input / output, Analog input with 2
wire & 4 wire & Analog output with fuse protection &
with isolation

CNC Specific I/O Interface

Slim Relay Modules
Modules with 50 Pin FRC Cable

DC & AC Relay Module Available with DC EMR / SSR Relay

with 1 C/O with without fuse & with fuse with FRC Cable
fuse & fuse blown indication

Available in 2/4/8/16/32
channel

Panel Accessoiries Modules

Utility Module with ON/OFF Fan Failure Detection Module Redundant Diode Oring Module with plastic & metalic enclosure
Control for tube lights and fans for 2 &4 Fans with Temperature and PCB open type
Monitoring Available in 5A / 10A / 20A / 40A / 70A

2
 INDUSTRIAL INTERACE SOLUTIONS

Passive Interface Modules Genset ON/OFF Relay Module

D sub to IDC/FRC to
Screw Terminals Screw Terminals

Terminal PCB 50 Pin MR50-L/F

Signal Isolators And Multipliers
Honda Connector 1 Mtr Cable Set

Signal Isolating Current & Voltage

Repeater Signal Isolator

Customized Prefabricated
Cables Assembles

Prefab Cable with Prefab cable with Prefab Cable with Prefab Cable with one side STP/UTP
both side D connector Both side FRC connector 40 pin FCN other end FRC IOTA connector & Lugs at other end Cable harness

Fiber Optic Patch Panels / LIU &

Patch Cords

Single mode 9 / 125 SC-SC/ST/LC

Duplex Patch Cords

Available in 6 / 8 / 12 / 24 / 48 port with Din Rail / Wall / Rack Mount with Multi mode (OM1/OM2) 62.5 / 125
SC/ST/LC/FC/Type couplers SC-SC/ST/LC Duplex Patch Cords

3
 ETHERNET TECHNOLOGY

UNMANAGED SWITCHES LITE MANAGED SWITCH

Available in 5/8/16/24 Available in 4/5/6 Ports

Ports with/without with/without MM/SM FO.
MM/SM FO. Support Supports ring
auto-negotiation and redundancy protocol.
auto-MDI/MDI-X. Rigid Support auto-negotiation
housing design. DIN-Rail and auto-MDI/MDI-X.
and wall mounting Rigid housing design.
enabled.

MANAGED SWITCH 3000 SERIES INDUSTRIAL MEDIA CONVERTERS

Available in 6/8/16/24 Available in 100M/1G

Ports with/without Speeds. Supports auto-
MM/SM FO. Supports negotiation and auto-
fastest redundant MDI/MDI-X. High
ethernet ring protocols. reliability and rigid metal
Supports L2/L3 managed housing. DIN-Rail and
functionality. Available in wall mounting enabled.
DIN-Rail and Rack Mount

CABLES FOR INDUSTRIAL COMMUNICATION

MODBUS RS-485 PROFIBUS

The RS-485 cables are the reference Downtime in industrial applications is

choice for automation systems, extremely costly: Cables ensure
including Modbus, BACnet MS/TP, maximum reliability, uptime, and
CANopen, or DMX512. Low performance. Tested, certied and
capacitance and enhanced noise proven to ensure application exibility
protection allow extended reach and in tough environments, including
the highest performance under harsh outdoors and in areas where multiple
conditions, as well as improving safety cable runs are required. Product
in case of re. Range: PROFIBUS DP, PROFIBUS PA
and PROFINET

ETHERNET CABLE /
VFD & SERVO CABLE
DATA / SIGNAL CABLE

ETHERNET CABLE: Product LÜTZE supplies exible and highly

Range: CAT5E, CAT6, CAT6A, exing motor connection and energy
CAT7, Industrial ethernet cable supply cables as well as system-
specic servo and feedback cables and
DATA / SIGNAL CABLE: Product low-capacitance cables for efcient
Range: Unshielded/Shielded, power transfer. LÜTZE servo cables
PVC/XLPE/Halogen free. are suitable for all types of drives,
however they are particularly effective
for motors with frequency convertors.

4
 INDUSTRIAL CONNECTIVITY

SENSOR/ACTUATOR CABLE I/O SYSTEMS

Flexible and robust designs, as For intelligent and reliable data

well as a remarkably large transmission, a flexible and cost-
number of standard and special effective I/O system is essential.
options, make Sensor/Actuator The Lumberg Automation I/O
Connectors from Lumberg systems portfolio offers a variety of
Automation suitable for a wide solutions to meet your needs,
variety of applications and ranging from passive distribution
markets, such as food and boxes, fieldbus and modular I/O
beverage, transportation, systems to high-performance
automotive or material modules.
handling.

SINGLE PAIR ETHERNET

DATA CONNECTORS CORDSET
(SPE) CONNECTORS

Compact, industrial-grade SPE NEW M8 D-Coded connector

products designed to enable the products meet the growing needs
connection from IP20 controlled for miniaturized components to
environments down to IP65/IP67 support cyber-physical integration
harsh industrial areas and tight in the IIoT. M8 D-Coded connectors
transportation applications. are 30% smaller than M12 circular
connector products and provide
new flexibility to build Ethernet-
based data networks in tight
spaces.

INDUSTRIAL PLUG IN RELAYS / PRODUCTS

RELAY Relay Base

A relay is an electrically operated

switch. It consists of a set of
input terminals for a single or
multiple control signals, and a set
of operating contact terminals.
The switch may have any number
of contacts in multiple contact
forms, such as make contacts,
break contacts, or combinations

Available with 8 & 14 pin with clip

CONNECTORS

PROFIBUS CONNECTORS PROFINET CONNECTORS

• Available in 90, 0 , 35 Degree angled • Quick-connect technology Easy

• Metalized housing Connect®
• No loose parts • Heavy-Duty metal housing.
• Integrated programming / diagnostic port • Transfer-rates of up to 100 Mbps
• Integrated switchable terminating resistor • Easy to mount and meet the IP20
• Screw terminals requirements
• With and Without LED Indication • 4-wired Twisted-Pair cables
• Easy Connect and Screw connect facility • Models: 90 °/ 180°, RJ45, Easy
• Optional DB9 with M12 Connectivity Connect®, 10/100 Mbps
• Support Rs 485 Technology

5
 CABLE CONNECTIONS

CABLE LUGS CONNECTORS

SWITCH MODE POWER SUPPLY ETHERET SWICTHES

Available in Quint / Essential series with Available in unmanged & managed switch with
2.5A / 5A / 10A / 20 / 40A & with 3 phase 5 / 8 / 16 port with POE

THERMOCOUPLE MEASURING
SAFETY RELAYS
TRANSDUCER

Our TÜV-certified safety

relays with force-guided
contacts provide maximum
safety for one to three fixed
safety functions. Depending
on space requirements,
highly compact designs
starting at just 6 mm are
available with SIL 2 or 3, Configurable temperature transducer for the
according to IEC 61508 connection of thermocouples. Can be configured via
DIP switches or, with extended functionality, using the
software. Screw connection, standard configuration.

SOLID -STATE RELAYS AND

ELECTROMECHANICAL RELAYS

PLC-INTERFACE, consisting of PLC-INTERFACE, consisting

basic terminal block PLC- of PLC-BSC.../21 basic
BSC.../21 with screw terminal block with screw
connection and plug-in connection and plug-in
miniature relay with power miniature solid-state relay,
contact, for assembly on DIN for mounting on DIN rail NS
rail NS 35/7,5, 1 changeover 35/7,5, 1 N/O contact, input:
contact, input voltage 24 V DC 24 V DC, output: 3 - 33 V
DC/3 A

6
 SOLID -STATE RELAYS AND
SWITCH MODE POWER SUPPLY
ELECTROMECHANICAL RELAYS

Available in S8FS & S8VK series from 2.1A to 40A Available in MY series & Slim Relay with EMR & SSR

SWITCH MODE POWER SUPPLY SMPS REDUNDANCY MODULE

Available in LRS / MDR /

EDR / NDR / SDR Series
Available in 20A & 40A

HEAVY DUTY CONNECTORS RELAY BASE

Available in 6 / 10 / 16 / 24 / 48 Pin Available in PCB & DIN Rail Mounting

7
FEED THROUGH TERMINALS
FUSE TERMINALS
(SCREW/SPRING TYPE)

• Polyamide 66 material • Polyamide 66 material

• Suitable for 35mm, 15mm and • Special Phosphor-Bronze
G type Rails contact for low contact
• For conductor sizes from 0.5 – resistance
95sqmm • LED fuse blow indication
• Various colours such as for 12/24/48/110/220VDC
Gn/Blk/Rd/Ye/Bl/Khaki/Or & 110/220VAC
available • Various colours such as
Gn/Blk/Rd/Ye/Bl/Khaki/Org
available

POWER/BUS BAR / HIGH

DISTRIBUTIONS BLOCKS
CURRENT TERMINALS

• Shrouded block with one • Wide range from 4 –

input and multiple outputs 240sqmm connection
• Suitable for power • Various colours such as
distribution in control Gn/Blk/Rd/Ye/Bl/Khaki/Org
circuits, panel earthing etc. available
• Various colours such as • New design of Finger Safe
Gn/Blk/Rd/Ye/Bl/Khaki/Org power TBs for 35/70sqmm
available capacity

PVC CABLE TRAYS

DIN RAILS
(WIRING DUCTS)

• Sizes available are 35x7.5, • Sizes in 25/40/45/60/80

35x15, 15x5.5mm & 100mm height & width
• Perforated & Non- • Available in Narrow as
perforated well as wide slot
• Length 1 Mtr & 2 Mtrs. • Std. Colour : Grey.
• RoHS & CE compliant White/Blue/Black
• Length 1 Mtr & 2 Mtrs.

INDUSTRIAL LUGS CABLE GLANDS

The plastic insulating sleeves simplify • Polyamide and metallic types

the fittings on to the conductor and • PG and Metric treading
the different colours denote the size • EMC cable glands available
of the cross sections. We also have • Accessories such as reducer,
cord end terminals for special enlarger, screw plugs
applications the twin series which
allows two conductors to be
compressed in our cord end
terminals.

AVP CORP
ShivShambho Paradise,
Sr. No. 28/6, Near Pari Company Chowk,
Dhayari, Pune - 411041
Phone: +91 7350004757 | +91 7720020004
www.avpcorp.in
E-mail: [email protected] | [email protected]