Scribd
Upload
2 views2 pages

Assignment7

This document is an assignment for the course AML152 Engineering Mechanics, due on April 11, 2025. It includes instructions for submission, presentation, and specific tasks such as drawing bending moment and shear force diagrams for various beams illustrated in provided figures. Late submissions will incur penalties.

Uploaded by

infovirenkataria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2 views2 pages

Assignment7

This document is an assignment for the course AML152 Engineering Mechanics, due on April 11, 2025. It includes instructions for submission, presentation, and specific tasks such as drawing bending moment and shear force diagrams for various beams illustrated in provided figures. Late submissions will incur penalties.

Uploaded by

infovirenkataria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DEPARTMENT OF APPLIED MECHANICS

Course: AML152 Engineering Mechanics


Assignment # 07 (S2025)

Date: 03/04/2025
Instructions:
1. Submit the assignments on plain A4 sized paper, leave sufficient margins on all sides of the paper.

2. Weightage will be given to neat presentation.

3. Illustrate your answers with neat figures, necessary formulas should be clearly mentioned and all answers should
have units.
th
4. Submit your assignments in the next week ( 11 April, 2025) in your respective tutorial sessions only. Late
submissions will be penalised.

1 Draw bending moment diagram and shear force diagram for the beams shown in Fig. 1. [6]

Fig. 1

2 Draw bending moment diagram and shear force diagram for the beam shown in Fig. 2. [4]

Fig. 2
3 Draw bending moment diagram and shear force diagram for the beam shown in Fig. 3. [4]
Locate the point of contraflexure.

Page 1 of 1
Fig. 3

4 Draw axial force diagram, shear force diagram and bending moment diagram for the [4]
beam as shown in Fig. 4.

Fig. 4

5 Draw shear force diagram and bending moment diagram for the beam as shown in Fig. [4]
5. Locate the point of contraflexure.

Fig. 5

6 Draw the shear force diagram of the beam AB loaded through the attached strut, shown [4]
in Fig 6.

Fig. 6

7 Draw the shear and moment diagrams for the cantilever beam subjected to the [4]
combination of distributed and point loads as shown in Fig. 7. State the distance b to the
left of A where the bending moment is zero.

Fig. 7

*****

Page 2 of 2

You might also like