Scribd
Upload
6 views1 page

Notes

The document outlines specifications for fabricating printed circuit boards (PCBs) using millimeters as the controlling dimensions. It mandates adherence to IPC standards for materials, including laminate and prepreg, which must be flame resistant and meet specific temperature ratings. Additionally, it emphasizes the use of customer-supplied data files for fabrication.

Uploaded by

Benyamin Farzaneh Aghajarie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
6 views1 page

Notes

The document outlines specifications for fabricating printed circuit boards (PCBs) using millimeters as the controlling dimensions. It mandates adherence to IPC standards for materials, including laminate and prepreg, which must be flame resistant and meet specific temperature ratings. Additionally, it emphasizes the use of customer-supplied data files for fabrication.

Uploaded by

Benyamin Farzaneh Aghajarie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

NOTES: UNLESS OTHERWISE SPECIFIED

1. MILLIMETERS (MM) ARE THE CONTROLLING DIMENSIONS FOR THE DRAWINGS AND
SUPPLIED DATA. INCH DIMENSIONS ARE FOR REFERENCE ONLY.
2. FABRICATE PCB IN ACCORDANCE WITH IPC-6012, CLASS 2; PER IPC-6011 USING
CUSTOMER SUPPLIED DATA FILES.
3. MATERIALS:
A. LAMINATE SHALL BE PER IPC-2221 PAR 4.3; IN ACCORDANCE WITH IPC-4101/25 OR /26,
LAMINATED SHEET, FLAME RESISTANT (MEETING UL 94V-0). TG RATING: 170° TO 200°.
B. PREPREG SHALL BE PER IPC-2221 PAR 4.2; IN ACCORDANCE WITH IPC-4101/25 OR /26,
PREPREG (B-STAGE), FLAME RESISTANT (MEETING UL 94V-0). TG RATING: 170° TO 200°.
REFER TO CROSS-SECTION FOR COPPER FOIL WEIGHTS.

You might also like