Scribd
Upload
2 views5 pages

Practical: RIP: IP Configure: PC A: IP Add: 10.0.0.2 Subnet Mask: 255.0.0.0 Default Gateway: 10.0.0.1

Uploaded by

jy193857.yadav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2 views5 pages

Practical: RIP: IP Configure: PC A: IP Add: 10.0.0.2 Subnet Mask: 255.0.0.0 Default Gateway: 10.0.0.1

Uploaded by

jy193857.yadav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Practical: RIP

IP Configure:

Pc A:

IP add: 10.0.0.2

Subnet mask: 255.0.0.0

Default Gateway: 10.0.0.1

Pc B:

IP add: 20.0.0.2

Subnet Mask: 255.0.0.0

Default Gateway: 20.0.0.1

Router Configure:

Router 2:

Router>en

Router#conf t

Router(config)#int se0/0/1
Router(config-if)#ip add 30.0.0.1 255.0.0.0

Router(config-if)#no shut

Router(config-if)#int se0/0/0

Router(config-if)#ip add 40.0.0.1 255.0.0.0

Router(config-if)#no sh

Router(config-if)#int fa0/0

Router(config-if)#ip add 10.0.0.1 255.0.0.0

Router(config-if)#no shut

Router(config-if)#ex

Router#conf t

Router(config)#router ?

bgp Border Gateway Protocol (BGP)

eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)

ospf Open Shortest Path First (OSPF)

rip Routing Information Protocol (RIP)

Router(config)#router rip

Router(config-router)#network 10.0.0.0

Router(config-router)#network 30.0.0.0

Router(config-router)#network 40.0.0.0

Router(config-router)#ex

Router3:

Router>en

Router#conf t

Router(config)#int se0/0/1

Router(config-if)#ip add 50.0.0.2 255.0.0.0

Router(config-if)#no shut
Router(config)#int se0/0/0

Router(config-if)#ip add 40.0.0.2 255.0.0.0

Router(config-if)#no shut

Router(config-if)#int fa0/0

Router(config-if)#ip add 20.0.0.1 255.0.0.0

Router(config-if)#no shut

Router(config-if)#router rip

Router(config-router)#network 20.0.0.1

Router(config-router)#no network 20.0.0.1

Router(config-router)#network 20.0.0.0

Router(config-router)#network 40.0.0.0

Router(config-router)#network 50.0.0.0

Router(config-router)#ex

Router1:

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int se0/0/0

Router(config-if)#ip add 30.0.0.2 255.0.0.0

Router(config-if)#no sh

Router(config-if)#int se0/0/1
Router(config-if)#ip add 50.0.0.1 255.0.0.0

Router(config-if)#no shut

Router(config-if)#router rip

Router(config-router)#network 30.0.0.0

Router(config-router)#network 50.0.0.0

Router(config-router)#ex

You might also like