${DocTitle}

${DocID}
April, 2012
Siemens Enterprise Communications GmbH & Co. KG
2011

Documentation
OpenScape Voice V7
SNMP Interface and MIBs
Interface Manual

A31003-H8070-T100-1-7618

Siemens Enterprise Communications

www.siemens-enterprise.com
 Our Quality and Environmental Management
Systems are implemented according to the
requirements of the ISO9001 and ISO14001 standard
certified by an external certification company.




Copyright © Siemens Enterprise
Communications GmbH & Co. KGApril, 2012
Hofmannstr. 51, D-80200 München
Siemens Enterprise Communications GmbH & Co. KG 
is a Trademark Licensee of Siemens AG
Reference No.: A31003-H8070-T100-1-7618
The information provided in this document contains
merely general descriptions or characteristics of
performance which in case of actual use do not always
apply as described or which may change as a result of
further development of the products. An obligation to
provide the respective characteristics shall only exist if
expressly agreed in the terms of contract. Availability
and technical specifications are subject to change
without notice.
OpenScape, OpenStage and HiPath are registered
trademarks of Siemens Enterprise
Siemens Enterprise Communications Communications GmbH & Co. KG. 
www.siemens-enterprise.com All other company, brand, product and service names
are trademarks or registered trademarks of their
respective holders.
Contents

List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2 Supported and Unsupported MIBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.1 Supported MIBS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.1.1 OpenScape Voice MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.1.2 SNMPv2 MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.2 Unsupported MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.3 Gathering MIBs Using Supported Compilers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.3.1 Standard RFC MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.3.2 Compilation Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.3.3 SNMP Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.3.4 Procedures for Compilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3 Event and Alarm Management MIBS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.1 Event Management MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.1.1 Event Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.1.1.1 Last Event Sequence Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1.1.2 Generic Trap OIDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.1.1.3 Event Descriptor Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.1.1.4 Filtered Event Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.1.1.5 Event Filter Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3.2 Alarm Management MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.2.1 Alarm Object Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.2.2 Active Alarm Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3.2.2.1 Correlation Trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4 External Message Flows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4.1 Message Flows Between the NOC and OpenScape Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4.2 Additional Message Flow Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4.3 Managing Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.3.1 Alarm Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.3.1.1 Alarm Clearance via Correlation Trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.3.1.2 Alarm Clearance via Trap with Clear Severity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.3.1.3 Manual Alarm Clearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.3.2 Alarm Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4.3.2.1 Lost Trap Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4.3.2.2 Periodic Audit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
4.3.3 Alarm Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5 SNMP Trap Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
5.1 Object Identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
5.1.1 hiQAccountMgmtFaultMgt (221). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5.1.2 hiQAucUscFaultMgmt (182) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5.1.3 hiQAudFaultMgmt (102) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.1.4 hiQCacFaultMgt (231) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
5.1.5 hiQGlobalFaultMgt (217) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

A31003-H8070-T100-1-7618, April, 2012

OpenScape Voice V7, SNMP and MIBs, Interface Manual 3
Contents

5.1.6 hiQHardwareFaultMgt (219) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

5.1.7 hiQLicensingFaultMgt (220). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
5.1.8 hiQNmFaultMgt (107) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
5.1.8.1 Failed Software Processes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
5.1.9 hiQOvlFaultMgmt (190) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5.1.10 hiQSbcFaultMgt (232) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5.1.11 hiQSecurityFaultMgt (218) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5.1.12 hiQSipFaultMgmt (230) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
5.1.13 hiQSnmFaultMgt (119). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
5.1.14 hiQSoapServerFaultMgmt (207) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
5.1.15 hiQSolidFaultMgt (141) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
5.1.16 hiQTicFaultMgmt (111) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
5.1.17 hiQTcaFaultMgt (216) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
5.1.18 hiQUCEServicesFaultMgmt (193) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5.1.19 hiQTcgFaultMgmt (233) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5.1.20 hiQPlatformFaultMgmt (234) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
5.1.21 hiQRapidStatFaultMgmt (235) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
5.1.22 hiQSmdiFaultMgmt (208). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
5.1.23 hiQNotificationMgmt (250) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
6 SNMP Performance Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6.1 OpenScape Voice MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6.1.1 SIP Signaling Manager Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6.1.2 MGCP Signaling Manager Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
6.1.3 UCE Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
6.1.4 Service Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
6.1.4.1 Call Forwarding Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
6.1.4.2 Calling Identity Delivery Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
6.1.4.3 Anonymous Call Rejection Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
6.1.4.4 Speed Calling Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
6.1.4.5 Screen List Editing Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
6.1.4.6 Selective Call Acceptance Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
6.1.4.7 Selective Call Rejection Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
6.1.4.8 Malicious Call Trace Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
6.1.4.9 Three Way Calling Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
6.1.4.10 Intercom Call Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
6.1.4.11 Voice Mail Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
6.1.4.12 Do Not Disturb Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
6.1.4.13 CSTA Monitor Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
6.1.4.14 CSTA Routing Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
6.1.4.15 CSTA Monitor List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
6.1.4.16 CSTA Routing List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
6.1.5 License Usage / Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
6.2 SNMPv2 MIBs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
6.2.1 IF-MIB II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
6.2.2 IP-MIB II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
6.2.3 TCP - MIB II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
6.2.4 UDP - MIB II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
6.2.5 SNMP - MIB II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
6.2.6 UCD-SNMP-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
6.2.6.1 Example of the data provided by the UCD-SNMP-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
7 Managing SNMP Trap Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

A31003-H8070-T100-1-7618, April, 2012

4 OpenScape Voice V7, SNMP and MIBs, Interface Manual
 Contents

7.1 Creating SNMP Trap Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

7.2 Modifying SNMP Trap Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
7.3 Deleting SNMP Trap Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
7.4 Displaying SNMP Trap Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
7.5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
7.5.1 Testing Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
7.5.2 Checking the node.cfg File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
7.6 Expert Mode Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170

A31003-H8070-T100-1-7618, April, 2012

OpenScape Voice V7, SNMP and MIBs, Interface Manual 5
Contents

A31003-H8070-T100-1-7618, April, 2012

6 OpenScape Voice V7, SNMP and MIBs, Interface Manual
 snmp_LOT.fm

List of Tables 0

Table 1 OpenScape Voice Supported MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Table 2 SNMPv2 Supported MIBs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 3 Unsupported MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 4 Variable Bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Table 5 Event Descriptor Table Variable Bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Table 6 Filtered Event Table Variable Bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Table 7 Event Filter Table Variable Bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Table 8 Alarm Object Table Variable Bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Table 9 Active Alarm Table Variable Bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Table 10 Correlation Trap Table Variable Bindings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Table 11 Fault Management Event Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Table 12 Account Managment Fault Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Table 13 Auc, User Collection Fault Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Table 14 Audit Fault Manager Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Table 15 CAC Fault Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Table 16 Global Fault Management Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Table 17 Hardware Managment Fault Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Table 18 License Fault Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Table 19 Node Manager Fault Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Table 20 SNMP Traps Reported When Software Processes Fail . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Table 21 Clearance Traps for Failed Software Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Table 22 Overload Fault Manager Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Table 23 SBC Fault Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Table 24 Security Fault Manager Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Table 25 Service Registration Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Table 26 Super Node Manager Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Table 27 Subscriber Manager (SOAP) Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Table 28 Solid Database Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Table 29 RTP Ticket Manager Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Table 30 Threshold Crossing Alarm (TCA) Fault Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Table 31 Service Registration Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Table 32 Test Call Generator Fault Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Table 33 Rolling Process Restart and Node Recovery Fault Traps . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Table 34 RapidStat Fault Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Table 35 SMDI Fault Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Table 36 Notification (Emergency Call) Trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Table 37 SIP Signaling Manager Measurement Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Table 38 MGCP Signaling Manager Performance Counters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Table 39 UCE Performance Measurement Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Table 40 Call Forwarding Performance Traffic Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Table 41 Calling Identity Delivery Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Table 42 Anonymous Call Rejection Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Table 43 Speed Calling Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Table 44 Screen List Editing Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Table 45 Selective Call Acceptance Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Table 46 Selective Call Rejection Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Table 47 Malicious Call Trace Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 7
snmp_LOT.fm

Table 48 Three Way Calling Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Table 49 Intercom Calling Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Table 50 Voice Mail Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Table 51 Do Not Disturb Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Table 52 CSTA Monitor Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Table 53 CSTA Routing Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Table 54 CSTA Monitor Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Table 55 CSTA Routing Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Table 56 License Usage Traffic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Table 57 IF-MIB II Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Table 58 IP-MIB II Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Table 59 TCP - MIB II Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Table 60 UDP - MIB II Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Table 61 SNMP - MIB II Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

A31003-H8070-T102-1-7618, April, 2012

8 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_LOF.fm

List of Figures 0

Figure 1 NOC Initial Alarm Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Figure 2 NOC Periodic Alarm Audit and Resynchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Figure 3 Alarm Correlation and Clearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Figure 4 Manually Clearing a System Alarm via the NOC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Figure 5 Filtered Alarm Initial Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Figure 6 Filtered Alarm Audit and Resychronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Figure 7 Lost Trap Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 8 Alarm Summary Retrieval. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 9
snmp_LOF.fm

A31003-H8070-T102-1-7618, April, 2012

10 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_overview.fm

1 Introduction
This chapter lists the SNMP Traps generated by the OpenScape Voice system
and received by the OpenScape Voice Assistant. The system generates traps to
alert management stations that failure events have been detected or cleared. The
OpenScape Voice supports the SNMP v2 trap format.

Note: For alarm descriptions and repair notes, refer to the OpenScape Voice
Service Handbook (SHB).

A fault is a condition in the system, detected by the system, where the system
does not behave as specified. All the faults are predefined by the system and can
not be changed.

When a fault is recognized by the system, it is raised to the system fault

management in order to be processed adequately:

• System internal service or component recognizes a fault

• System fault management is informed about the fault.

• Fault event is logged in the persistent system log file.

• Fault is assigned a fault severity.

• Faults with severity minor, major, critical are stored in the alarm database

• Faults with severity warning, minor, major, critical and fault clearance events
are reported with SNMP traps

• Alarm is set to the active (ON) state.

• If the alarm is switched on in the OpenScape Voice Assistant and there is

already the same alarm active, the new alarm data is taken over, e.g. the
timestamp of the active alarm is set to the new occurrence. In addition, the
alarm hit count1 is incremented.

• A corresponding alarm history entry is created in the alarm history log.

If, for any reason, forwarding of faults from OpenScape Voice to a surveillance
system (like Assistant) is not possible, the faults can be read from the OSV
database via SNMP, CLI or reading a file with a list of active alarms.

1. Shows how many times an alarm has been triggered since the last acknowledge action.

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 11
snmp_mibs.fm

2 Supported and Unsupported MIBS

The Managed Information Base (MIB) is a deliverable with the OpenScape Voice
system, and describes the objects that a third party system may manage via
SNMP. The MIB exists as a number of files, specified in Table 1 and Table 2.

To facilitate upgrades, the SNMP interface and MIBs must be backward

compatible. The NOC should be upgraded first to support the latest OpenScape
Voice system version, and therefore also be able to support previous OpenScape
Voice versions.

2.1 Supported MIBS

The MIBs are located in a zip archive (HiPath8000_Mibs.zip) in the /opt/SMAW/
SMAWrtp/snmpMib directory. The following sections include the MIBs that have
been retained and are now supported.

2.1.1 OpenScape Voice MIBs

Table 1 outlines the OpenScape Voice supported MIBs. For additional information
and specific OIDs for each group, refer to Section 6.1, “OpenScape Voice MIBs”,
on page 63.

hiq8000Admin.mib us_srxUce.mib RtpAdmAlarmMgmt.mib

hiqTrap.mib us_srxMgcp.mib RtpAdmEventMgmt.mib
hiqFeatLic.mib RtpAdm.mib surpassRtpAdmin.mib
us_srxService.mib surpassRtp.mib surpassRtpProducts.mib
us_srxSip.mib

Table 1 OpenScape Voice Supported MIBs

A31003-H8070-T102-1-7618, April, 2012

12 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_mibs.fm

2.1.2 SNMPv2 MIBs

Table 2 outlines the SNMPv2 supported MIBs. For additional information and
specific OIDs, refer to Section 6.2, “SNMPv2 MIBs”, on page 126.

SNMPV2-SMI (RFC 2578) TCP-MIB (RFC 4022)

SNMPV2-TC (RFC 2579) UDP-MIB (RFC 4113)
SNMPv2-CONF (RFC 2580) IANAifType-MIB
SNMPv2-MIB (RFC 3418) IP-MIB (RFC 4293)
INET-ADDRESS-MIB (RFC 2851) IF-MIB (RFC 2863)
UCD-SNMP MIB

Table 2 SNMPv2 Supported MIBs

2.2 Unsupported MIBs

SNMP MIBs are required to support third party Network Operations Centers,
operated by either customer or via EN Managed Service Offerings. However,
many legacy MIBs also support provisioning that has since been migrated to
SOAP instead of SNMP, and also Carrier-specific MIBs. Such MIBs are no longer
supported and have been removed from OpenScape Voice deliverables. Refer to
Table 3 for a list of these unsupported MIBs.

h323com.mib hiqSmdi.mib us_srxIcp.mib

hiqCaleaAdmin.mib hiqSubAdmin.mib us_srxIsdn.mib
hiqCGCTraffic.mib hiqTgTraffic.mib us_srxIsup.mib
hiqCmtsAdmin.mib hiqTrafficMeas.mib us_srxLnp.mib
hiqCSTA.mib hiqTTUD.mib us_srxMaintMgr.mib
hiqDfAdmin.mib us_srxSs7.mib us_srx.mib
hiqEvtMsg.mib us_srxTnsans.mib us_srxNfas.mib
hiqIN.mib usvoicemibs.mib us_srxPri.mib
hiqIrm.mib v2-tc.my us_srxPrm.mib
hiqHttpDigest.mib ussmi.mib us_srxPstnRteDest.mib
hiqPsa.mib us_srxAuc.mib us_srxPstnTrunk.mib
hiqRetailer.mib us_srxBase.mib us_srxTrap.mib
hiqRksAdmin.mib us_srxBch.mib us_srxXlaZone.mib
hiqRouting.mib us_srxCasSm.mib us_srxMegaco.mib
hiqSBrk.mib us_srxDnm.mib us_srxH323.mib
hiqSecurity.mib us_srxMain.mib us_srxOvl.mib
Table 3 Unsupported MIBs(Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 13
snmp_mibs.fm

RtpAdmProcessMgmt.my RtpAdmSS7Mgmt.my RtpAdmStatCountMgmt.my

Table 3 Unsupported MIBs(Seite 2 von 2)

2.3 Gathering MIBs Using Supported Compilers

The OpenScape Voice MIBs have been tested and collected successfully with the
following compilers. Instructions how to gather the MIBs with each compiler are
supplied in the ‘readme’ file located in the /opt/SMAW/SMAWrtp/snmpMib
directory.

• Net-SNMP - an open source product.

• MG-Soft - a supplier of SNMP, and general network management

applications, toolkits and solutions.

• Emanate - an SNMP toolkit, and,

• Zenoss Core - an enterprise-grade open source monitoring platform.

2.3.1 Standard RFC MIBs

In order to compile the OpenScape Voice MIBs, the following standard RFC MIBs
are needed:

• SNMPv2-SMI

• SNMPv2-TC

• SNMPv2-CONF

• SNMPv2-MIB

• INET-ADDRESS-MIB

• TCP-MIB

• UDP-MIB

• IANAifType-MIB

• IF-MIB

• IP-MIB

These MIBs are acquired from the compiler. In case they are not provided,
download them from the following directory in the OpenScape Voice system or
any Linux Machine with Net-SNMP installed:

/usr/share/snmp/mibs/

A31003-H8070-T102-1-7618, April, 2012

14 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_mibs.fm

2.3.2 Compilation Order

The recommended compile order is as follows:

1. SNMPv2-SMI

2. SNMPv2-TC

3. SNMPv2-CONF

4. SNMPv2-MIB

5. INET-ADDRESS-MIB

6. TCP-MIB

7. UDP-MIB

8. IANAifType-MIB

9. IF-MIB

10. IP-MIB

11. RtpAdm.mib

12. RtpAdmEventMgmt.mib

13. RtpAdmAlarmMgmt.mib

14. surpassRtp.mib

15. surpassRtpAdmin.mib

16. surpassRtpProducts.mib

17. hiq8000Admin.mib

18. hiqTrap.mib

19. hiqFeatLic.mib

20. us_srxSip.mib

21. us_srxUce.mib

22. us_srxService.mib

23. us_srxMgcp.mib

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 15
snmp_mibs.fm

2.3.3 SNMP Operations

The following SNMP functions (based on Net-SNMP) can be executed against
OpenScape Voice MIBs and MIB-II.

• SNMPTRANSLATE - displays MIB contents in meaningful text.

• SNMPGET - retrieves data.

• SNMPGETNEXT - retrieves unknown indexed data.

• SNMPWALK - performs a sequence of chained GETNEXT requests.

• SNMPTABLE - retrieves the contents of an SNMP table, and displays it one

row at a time.

• SNMPSET - performs write operations.

• SNMPBULKGET - retrieves data using SNMP GETBULK request.

• SNMPBULKWALK - retrieves a sub-tree of management values using SNMP

GETBULK requests.

• SNMPTRAP - notifications used to signal alarms.

2.3.4 Procedures for Compilation

Instructions for collecting the mibs using the qualified compilers (Zenoss,
NetSnmp, Emanate, MG-Soft) can be obtained from the README file also
delivered in /opt/SMAW/SMAWrtp/snmpMib.

Siemens Enterprise Communications does not guarantee that the MIBs provided
will collect, or gather, with other compilers without errors and/or warnings.

A31003-H8070-T102-1-7618, April, 2012

16 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_alarm_mibs.fm

3 Event and Alarm Management MIBS

There are two Managed Information Base (MIB) files for OpenScape Voice
alarming that specify all alarms reported by OpenScape Voice applications as
well as the new RTP alarm Object Identifiers (OIDs). These two MIBs are:

• Event Management

• Alarm Management

Sometimes referred to as a variable binding, the pairing of the name of a variable

and its associated value creates the OID. The variable bindings (see the first
column of Table 4) in a particular alarm grouping are combined to form the
category. Refer to Section 5.1, “Object Identifier”, on page 40 for additional
information.

3.1 Event Management MIB

The Event Management MIB contains information relating to details of the alarms
and event configuration and includes the following elements:

• Event Table (rtpEvtTable)

• Traps (rtpEvtTraps)

• Event Escalation Filter1 (rtpEvtEscalationFilterTable)

• Event Descriptors (rtpEvtDescriptorTable)

• Filtered Event Table (rtpEvtFilteredEventTable)

• Event Filter Table (rtpEvtFilterTable)

3.1.1 Event Table

The rtpEvtTable is a table that contains the details of each reported event. Table
4 defines the variable binding object list that comprises the Event Table. All are
read only. Refer to Table 4 for specific information.

rtpEvtTable 1.3.6.1.4.1.4329.2.1.2.1.1.1
Aggregate not-accessible
rtpEvtTableEntry 1.3.6.1.4.1.4329.2.1.2.1.1.1.1
Aggregate not-accessible
Table 4 defines the variable binding object list of every reported event. All are
read only.

1. Presently, this table is not used.

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 17
snmp_alarm_mibs.fm

Variable Binding Syntax/Values Description

rtpEvtSequenceNumberIndex Unsigned32 This variable binding records an event sequence number
that is unique within the entire OpenScape Voice system.
This value is incremented by one for each new event.
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.1
rtpEvtCurrId Unsigned32 This variable binding records the current log record ID of
the event in the database. This object’s value is always
identical to the value of rtpEvtSequenceNumberIndex.
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.2
rtpEvtSet Integer32 This variable binding records the National Language
(1 - 32767) Support (NLS) set number of the event.
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.3
rtpEvtNum Integer32 This variable binding records the NLS ID number of the
(1 - 32767) event.
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.4
rtpEvtSeverity INTEGER This variable binding records the event’s severity level.
• critical (1) Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.5
• major (2)
• minor (3)
• warning (4)
• informational (5)
• clear (6)
• unknown (7)
rtpEvtEventTime INTEGER This variable binding records the time at which the event
(0..2147483647) occurred, in seconds since 1.Jan.1970 00:00:00h.
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.6
rtpEvtReportingObject OCTET STRING This variable binding records the logical name of the
(Size = 0 - 63) process that reported the event. Please note that the
logical name of a process is unique within the entire
OpenScape Voice system.
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.7
rtpEvtFaultyObject OCTET STRING This variable binding describes what failed and records
(Size = 0 - 63) the OpenScape Voice node that reported the event (i.e.,
generated the trap).
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.8
rtpEvtEndkey INTEGER This variable binding records the end key as an integer
• noRecoveryDefined (0) and indicates whether an automatic recovery action has
• recoveryManagerInformed been initiated at the RTP or not. If this action succeeds,
(1) an appropriate clear message is sent by the RTP.
Otherwise, no clear message is sent.
Variable OID:
1.3.6.1.4.1.4329.2.1.2.1.1.1.1.9
NOTE: Currently, the end key is not supported and is
always set to noRecoveryDefined.
rtpEvtFormatText OCTET STRING This variable binding records the format string of the
(Size = 0 - 512) default short text with place holders, such as “printf” for
variable parameters.
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.10

Table 4 Variable Bindings (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

18 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_alarm_mibs.fm

Variable Binding Syntax/Values Description

rtpEvtParameters OCTET STRING This variable binding records the variable parts of the
(Size = 0 - 4096) event, encoded in the following manner:
rtpEvtParameters = <empty> or rtpEvtParameters
parameter
parameter = type = value <null-byte>
type = “c” (character), “s” (string), “d” (integer/long
integer), “u” (unsigned integer/unsigned long integer), or
“g” (float/double)
value = <empty> or value <non-null-character>
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.11
rtpEvtAlarmType Integer This variable binding reports the type of alarm object to
• Communication (1) which the event belongs (i.e., the alarm type).
• Service (2) Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.12
• Processing (3)
• Equipment (4)
• Database (6)
• Security (32)
• Indication (34)
NOTE: Values in the range 32
- 2147483647 are application
specific.
rtpEvtShortText OCTET STRING This variable binding describes the alarm and records the
(Size = 0 - 512) short text, including all variable parameters.
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.13
rtpEvtFilterLastTransId This variable binding records the end of the variable list
for each trap.
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.9.1.5
rtpClusterName OCTET STRING The cluster name is an identifier of the cluster publishing
the event.
Variable OID: 1.3.6.1.4.1.4329.2.1.2.1.1.1.1.14

Table 4 Variable Bindings (Seite 2 von 2)

3.1.1.1 Last Event Sequence Number

The following OID can be used to retrieve the sequence number of the last trap
that was reported to all "generic" destinations configured in the SNMP master
agent. If event filters are being used to route traps to specific management
systems, then the sequence number may be different for each system. Refer to
Section 3.1.1.5, “Event Filter Table”, on page 24 for more information.

rtpEvtLastEventSequenceNumber 1.3.6.1.4.1.4329.2.1.2.1.1.2
Unsigned32 read-only

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 19
snmp_alarm_mibs.fm

3.1.1.2 Generic Trap OIDs

Used only by RTP, the following OIDs represent the generic trap IDs for alarm
traps generated by RTP that do not have a specific OID configured for a given
Event Set-Event ID.

Attention: In general, generic trap IDs should be avoided to allow correlating a

clearing event with a specific alarm trap.

rtpEvtTrapCritical 1.3.6.1.4.1.4329.2.1.2.1.1.3.1
nonLeaf
rtpEvtTrapMajor 1.3.6.1.4.1.4329.2.1.2.1.1.3.2
nonLeaf
rtpEvtTrapMinor 1.3.6.1.4.1.4329.2.1.2.1.1.3.3
nonLeaf
rtpEvtTrapWarning 1.3.6.1.4.1.4329.2.1.2.1.1.3.4
nonLeaf
rtpEvtTrapInformation 1.3.6.1.4.1.4329.2.1.2.1.1.3.5
nonLeaf
rtpEvtTrapClear 1.3.6.1.4.1.4329.2.1.2.1.1.3.6
nonLeaf
rtpEvtTrapUnknown 1.3.6.1.4.1.4329.2.1.2.1.1.3.7
nonLeaf
Each trap, generic or specific, provides the following object list. Refer to Table 4
for details.

rtpEvtSequenceNumberIndex=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.1
=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.2
rtpEvtSet=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.3
rtpEvtNum=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.4
rtpEvtSeverity=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.5
rtpEvtEventTime=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.6
rtpEvtReportingObject=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.7
rtpEvtFaultyObject=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.8
rtpEvtEndkey=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.9
rtpEvtFormatText=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.10
rtpEvtParameters=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.11
rtpEvtAlarmType=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.12
rtpEvtShortText=1.3.6.1.4.1.4329.2.1.2.1.1.1.1.13
rtpEvtFilterLastTransId=1.3.6.1.4.1.4329.2.1.2.1.1.9.1.5

Note: rtpEvtFaultyObject contains a duplicate of the "FaultyObject" character

string, which is the concatenation of the first three variables of the
rtpEvtShortText.

3.1.1.3 Event Descriptor Table

The rtpEvtDescriptorTable is a table that contains the severity and alarm type
(summary category) for each Event Set-Event ID. These are configured in the
*.eds files. Refer to Table 5 for details.

A31003-H8070-T102-1-7618, April, 2012

20 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_alarm_mibs.fm

rtpEvtDescriptorTable 1.3.6.1.4.1.4329.2.1.2.1.1.5
Aggregate not-accessible
rtpEvtDescriptorTableEntry 1.3.6.1.4.1.4329.2.1.2.1.1.5.1
Aggregate not-accessible
Table 5 defines the variable binding object list of the Event Descriptor Table. All
objects are read only.

Object Syntax/Values Description/Variable OID

rtpEvtDescriptorSet Integer32 This object records the descriptor set number of the event.
(1..32767) 1.3.6.1.4.1.4329.2.1.2.1.1.5.1.1
rtpEvtDescriptorNum Integer32 This object records the descriptor ID number of the event.
(1..32767) 1.3.6.1.4.1.4329.2.1.2.1.1.5.1.2
rtpEvtDescriptorSeverity INTEGER This object records the event’s severity level.
• critical (1) 1.3.6.1.4.1.4329.2.1.2.1.1.5.1.3
• major (2)
• minor (3)
• warning (4)
• informational (5)
• clear (6)
• unknown (7)
rtpEvtDescriptorAlarmType INTEGER This object reports the type of alarm object to which the
• Communication (1) event belongs (i.e., the alarm type).
• Processing (3) 1.3.6.1.4.1.4329.2.1.2.1.1.5.1.4
• Equipment (4)
• Database (6)
• Security (32)
• Indication (34)
NOTE: Values in the range 32
- 2147483647 are application
specific.

Table 5 Event Descriptor Table Variable Bindings

3.1.1.4 Filtered Event Table

The rtpEvtFilteredEventTable is a table that contains details of the alarms that are
sent to management systems configured in the Event Filter Table and is indexed
by the IP address of the management system. Refer to Table 6 for details.

rtpEvtFilteredEventTable 1.3.6.1.4.1.4329.2.1.2.1.1.8
Aggregate not-accessible
rtpEvtFilteredEventEntry 1.3.6.1.4.1.4329.2.1.2.1.1.8.1
Aggregate not-accessible

Table 6 defines the variable binding object list of the Filtered Event Table (Fet).
All objects are read only.

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 21
snmp_alarm_mibs.fm

Object Syntax/Values Description/Variable OID

rtpEvtFetIpAddress OctetString This object is the address of the management station.
(4..8) 1.3.6.1.4.1.4329.2.1.2.1.1.8.1.1
rtpEvtFetCurrId Unsigned32 This object records the current log record ID of the event
in the database. This object’s value is always identical to
the value of rtpEvtSequenceNumberIndex.
1.3.6.1.4.1.4329.2.1.2.1.1.8.1.2
rtpEvtFetSet Integer32 This object records the Filtered Event Table set number of
(1..32767) the event.
1.3.6.1.4.1.4329.2.1.2.1.1.8.1.3
rtpEvtFetNum Integer32 This object records the Filtered Event Table ID number of
(1..32767) the event.
1.3.6.1.4.1.4329.2.1.2.1.1.8.1.4
rtpEvtFetSeverity INTEGER This object records the event’s severity level.
• critical (1) 1.3.6.1.4.1.4329.2.1.2.1.1.8.1.5
• major (2)
• minor (3)
• warning (4)
• informational (5)
• clear (6)
• unknown (7)
rtpEvtFetEventTime INTEGER This object records the time at which the event occurred,
(0..2147483647) in seconds since 1.Jan.1970 00:00:00h.
1.3.6.1.4.1.4329.2.1.2.1.1.8.1.6
rtpEvtFetReportingObject OctetString This object records the logical name of the process that
(0..63) reported the event. Note that the logical name of a process
is unique within the entire OpenScape Voice system.
1.3.6.1.4.1.4329.2.1.2.1.1.8.1.7
rtpEvtFetFaultyObject OctetString This object describes what failed and records the
(0..63) OpenScape Voice node that reported the event (i.e.,
generated the trap).
1.3.6.1.4.1.4329.2.1.2.1.1.8.1.8
rtpEvtFetEndkey INTEGER This object records the end key as an integer and
• noRecoveryDefined (0) indicates whether an automatic recovery action has been
• recoveryManagerInformed initiated at the RTP or not. If this action succeeds, an
(1) appropriate clear message is sent by the RTP. Otherwise,
no clear message is sent.
1.3.6.1.4.1.4329.2.1.2.1.1.8.1.9
NOTE: Currently, the end key is not supported and is
always set to 0 - noRecoveryDefined.
rtpEvtFetFormatText OctetString This object records the format string of the default short
(0..512) text with place holders, such as “printf” for variable
parameters.
1.3.6.1.4.1.4329.2.1.2.1.1.8.1.10

Table 6 Filtered Event Table Variable Bindings (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

22 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_alarm_mibs.fm

Object Syntax/Values Description/Variable OID

rtpEvtFetParameters OctetString This object records the variable parts of the event,
(0..4096) encoded in the following manner:
• rtpEvtParameters = <empty> or rtpEvtParameters
parameter
• parameter = type = value <null-byte>
• type = “c” (character), “s” (string), “d” (integer/long
integer), “u” (unsigned integer/unsigned long integer),
or “g” (float/double)
• value = <empty> or value <non-null-character>
1.3.6.1.4.1.4329.2.1.2.1.1.8.1.11
rtpEvtFetAlarmType INTEGER This object reports the type of alarm object to which the
• Communication (1) event belongs (i.e., the alarm type).
• Processing (3) 1.3.6.1.4.1.4329.2.1.2.1.1.8.1.12
• Equipment (4)
• Database (6)
• Security (32)
• Indication (34)
NOTE: Values in the range 32
- 2147483647 are application
specific.
rtpEvtFetShortText OctetString This object describes the alarm and records the short text,
(0..512) including all variable parameters.
1.3.6.1.4.1.4329.2.1.2.1.1.8.1.13

Table 6 Filtered Event Table Variable Bindings (Seite 2 von 2)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 23
snmp_alarm_mibs.fm

3.1.1.5 Event Filter Table

The rtpEvtFilterTable (the destination of the alarm trap) contains a list of

management stations to which alarms for specific event sets should be sent.

rtpEvtFilterTable 1.3.6.1.4.1.4329.2.1.2.1.1.9
Aggregate not-accessible
rtpEvtFilterEntry 1.3.6.1.4.1.4329.2.1.2.1.1.9.1
Aggregate not-accessible

Table 7 defines the variable binding object list of the Event Filter Table. All objects
are read only, unless noted.

Object Syntax/Values Description/Variable OID

rtpEvtFilterIpAddress OctetString(4..8) The object is the address of the management station.
1.3.6.1.4.1.4329.2.1.2.1.1.9.1.1
rtpEvtFilterEventSets OctetString(0..512) The object is the colon-separated list of event sets
Read-Create that should be sent. It can be specified as an empty
string, which indicates that all event sets and
severity levels should be sent.
1.3.6.1.4.1.4329.2.1.2.1.1.9.1.2
rtpEvtFilterSeverityLevels OctetString(0..13) The object is the colon-separated list of severity
Read-Create levels that should be sent. It can be specified as an
empty string, which indicates that all event sets and
severity levels should be sent.
1.3.6.1.4.1.4329.2.1.2.1.1.9.1.3
rtpEvtFilterSnmpVersion INTEGER 1.3.6.1.4.1.4329.2.1.2.1.1.9.1.4
• v1 (1)
• v2c (2)
• v3 (3)
Read-Create
NOTE: Currently, v3 is not
supported.
rtpEvtFilterLastTransId Unsigned32 This object records the end of the variable list for
each trap.
1.3.6.1.4.1.4329.2.1.2.1.1.9.1.5
rtpEvtFilterLastCurrId Unsigned32 This object records the last current log record ID of the
event in the database. This object’s value is always
identical to the value of rtpEvtSequenceNumberIndex.
1.3.6.1.4.1.4329.2.1.2.1.1.9.1.6
rtpEvtFilterRowStatus INTEGER 1.3.6.1.4.1.4329.2.1.2.1.1.9.1.7
• active (1)
• notInService (2)
• notReady (3)
• createAndGo (4)
• createAndWait (5)
• destroy (6)
Read-Create

Table 7 Event Filter Table Variable Bindings

A31003-H8070-T102-1-7618, April, 2012

24 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_alarm_mibs.fm

3.2 Alarm Management MIB

The Alarm Management MIB contains information pertaining to Alarm Summary
Objects as well as a list of the currently active alarms and includes the following
elements:

• Alarm Status Object Table (rtpArmAlarmObjectTable)

• Active AlarmTable (rtpArmAlarmTable)

• Correlation Trap (rtpArmCorrIdTrap)

3.2.1 Alarm Object Table

The rtpArmAlarmObjectTable holds the current status of each of the alarm types
or categories.

rtpArmAlarmObjectTable 1.3.6.1.4.1.4329.2.1.2.2.1.1
Aggregate not-accessible
rtpArmAlarmObjectEntry 1.3.6.1.4.1.4329.2.1.2.2.1.1.1
Aggregate not-accessible

Table 8 defines the variable binding object list of the Alarm Object Table. All
objects are read only, unless noted.

Object Syntax/Values Description/Variable OID

rtpArmAlarmObjectType INTEGER 1.3.6.1.4.1.4329.2.1.2.2.1.1.1.1
rtpArmAlarmObjectStatus INTEGER 1.3.6.1.4.1.4329.2.1.2.2.1.1.1.2
• rtpArmOk (0)
• rtpArmNOk (1)
rtpArmAlarmObjectAction INTEGER Setting rtpArmAlarmObjectAction to 1 (clear) will
• nothing (0) clear the alarms related to the given
• clear (1) rtpArmAlarmObjectType, clearing the alarm object
Read-Write for this type of alarm.
1.3.6.1.4.1.4329.2.1.2.2.1.1.1.3

Table 8 Alarm Object Table Variable Bindings

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 25
snmp_alarm_mibs.fm

3.2.2 Active Alarm Table

The rtpArmAlarmTable is a table of currently active alarms.

rtpArmAlarmTable 1.3.6.1.4.1.4329.2.1.2.2.1.2
Aggregate not-accessible
rtpArmAlarmEntry 1.3.6.1.4.1.4329.2.1.2.2.1.2.1
Aggregate not-accessible

Table 9 defines the variable binding object list of the Active Alarm Table. All
objects are read only, unless noted.

Object Syntax/Values Description/Variable OID

rtpArmAlarmType INTEGER 1.3.6.1.4.1.4329.2.1.2.2.1.2.1.1
rtpArmAlarmTime INTEGER( 1.3.6.1.4.1.4329.2.1.2.2.1.2.1.2
0..2147483647)
rtpArmAlarmId Unsigned32 The rtpArmAlarmId field that is returned is an index
into the RtpEvtTable, where details for the alarm can
be retrieved.
1.3.6.1.4.1.4329.2.1.2.2.1.2.1.3
rtpArmAlarmAction INTEGER Setting the rtpArmAlarmAction will cause alarms to
• nothing (0) be cleared as described below.
• deleteSingle (1) 1.3.6.1.4.1.4329.2.1.2.2.1.2.1.4
• deleteBeforeId (2)
• deleteBeforeTime (3) Setting this object to one of the specified actions has the
Read-Write following effects:

deleteSingle - Deletes a single entry selected by its

current Id (rtpArmAlarmId) from the alarm table.
rtpArmAlarmType and rtpArmAlarmTime should be set to
zero or to valid values (i.e. an existing OID).

deleteBeforeId - Deletes all entries within the specified

alarm type from the top of the alarm table to the set current
Id (rtpArmAlarmId) from the alarm table.
rtpArmAlarmTime should be set to zero or to a valid value
(i.e. an existing OID).

deleteBeforeTime - Deletes all entries within the

specified alarm type from the top of the alarm table to the
set alarm time (rtpArmAlarmTime) from the alarm table.
rtpArmAlarmId must be set to a valid value (i.e. an existing
OID).

nothing - has no effect

Table 9 Active Alarm Table Variable Bindings

A31003-H8070-T102-1-7618, April, 2012

26 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_alarm_mibs.fm

3.2.2.1 Correlation Trap

The rtpArmCorrIdTrap mainly contains the Current ID of a Clear event

('rtpEvtCurrId') and the list of Correlated IDs, i.e., those alarm IDs which have
been cleared by the Clear event ('rtpArmCiCorrIDs'). The list of Correlated IDs
may be empty. Or, it may also be too long to fit into a single SNMP Protocol Data
Unit (PDU). For the latter reason, it may be necessary to send more than one trap
for the same Clear event in order to provide all Correlated IDs. There are objects
in the trap controlling the sending of multiple parts of the Correlated ID list
('rtpArmCiMultipartNum', 'rtpArmCiAmountOfParts').

Note: Since there is no filtering for 'rtpArmCorrIdTrap' traps, all recipients

(configured either in 'rtpEvtFilterTable' - see the event management mib file:
RtpAdmEventMgmt.my - or at the EMANATE Master Agent) will receive the
same(!) value in 'rtpArmCiLastTransId', respectively!"

rtpArmCorrIdTrap 1.3.6.1.4.1.4329.2.1.2.2.1.3
nonLeaf

Table 10 defines the variable binding object list of the Correlation Trap Table. All
objects are read only.

Object Syntax/Values Description/Variable OID

rtpEvtCurrId Unsigned32 This object records the current log record ID of the event
in the database. This object’s value is always identical to
the value of rtpEvtSequenceNumberIndex.
Variable OID:
1.3.6.1.4.1.4329.2.1.2.1.1.1.1.2
rtpArmCiLastTransId Unsigned32 This object records the end of the variable list for each
trap.
1.3.6.1.4.1.4329.2.1.2.2.1.4
rtpArmCiMultipartNum Integer32 This object is the sequence number of the message (trap).
1.3.6.1.4.1.4329.2.1.2.2.1.5
rtpArmCiAmountOfParts Integer32 This object is the total number of traps to be sent.
1.3.6.1.4.1.4329.2.1.2.2.1.6
rtpArmCiAmountOfCorrIDs Integer32 This object is the number of correlation IDs contained in all
of the messages.
1.3.6.1.4.1.4329.2.1.2.2.1.7
rtpArmCiCorrIDs OctetString This object is the list of IDs, separated by colons. If this list
(0..4096) cannot be contained within one trap, multiple traps will be
sent.
1.3.6.1.4.1.4329.2.1.2.2.1.8
Table 10 Correlation Trap Table Variable Bindings

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 27
snmp_msg_flows.fm

4 External Message Flows

When an alarm is generated in the OpenScape Voice Server, the first snmpwalk
command issued from an external system to read the OSV alarm table
(rtpArmAlarmTable) may miss alarms. A second call however shows all alarms.

4.1 Message Flows Between the NOC and OpenScape Voice

This section includes external message flow examples between the Network
Operations Center (NOC) and the OpenScape Voice system.

• Figure 1 - NOC Initial Alarm Synchronization

• Figure 2 - NOC Periodic Alarm Audit and Resynchronization

• Figure 3 - Alarm Correlation and Clearing

• Figure 4 - Manually Clearing an Alarm in the OpenScape Voice system via

the NOC

There are, however, other methods to achieve the same end result, so possible
flows for other surveillance systems are shown in Section 4.2, “Additional
Message Flow Diagrams”, on page 32.

A31003-H8070-T102-1-7618, April, 2012

28 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_msg_flows.fm

Figure 1 NOC Initial Alarm Synchronization

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 29
snmp_msg_flows.fm

Figure 2 NOC Periodic Alarm Audit and Resynchronization

Figure 3 Alarm Correlation and Clearing

A31003-H8070-T102-1-7618, April, 2012

30 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_msg_flows.fm

Figure 4 Manually Clearing a System Alarm via the NOC

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 31
snmp_msg_flows.fm

4.2 Additional Message Flow Diagrams

If a surveillance system does not restrict which event sets cause traps to be sent,
and if all critical, major, minor, and clear severity traps are sent to the surveillance
system, then it is suggested (not required) to follow the "Filtered Alarm" flows that
are shown below:

• Figure 5 - Filtered Alarm Initial Synchronization

• Figure 6 - Filtered Alarm Audit and Resynchronization

• Figure 7 - Lost Trap Detection

• Figure 8 - Alarm Summary Retrieval

Figure 5 Filtered Alarm Initial Synchronization

A31003-H8070-T102-1-7618, April, 2012

32 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_msg_flows.fm

Figure 6 Filtered Alarm Audit and Resychronization

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 33
snmp_msg_flows.fm

Figure 7 Lost Trap Detection

Note: The lost trap detection mechanism described above cannot be used for
the OSV because the OSV does not send SNMP traps for all events (some event
sets and alarm severities are internally suppressed, e.g. warnings).
Consequently there will always be gaps in the RtpEvtCurrId sequence. See
Section 4.3.2.1, “Lost Trap Detection” which describes the process that must be
followed for lost trap detection with the OSV.

A31003-H8070-T102-1-7618, April, 2012

34 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_msg_flows.fm

Figure 8 Alarm Summary Retrieval

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 35
snmp_msg_flows.fm

4.3 Managing Alarms

Alarm clearance, (re)synchronization, and obtaining alarm summary information
are a few of the tasks associated with managing alarms. The following sections
offer possible solutions that a NOC might use to interface with the OpenScape
Voice alarm subsystem.

4.3.1 Alarm Clearance

The ability to automatically clear most alarms is provided. The OpenScape Voice
system has its own alarm-to-clearance event correlation that can be used. A
surveillance system can make its own correlation, based on receiving traps with
a Clear severity. And, in rare instances, it may be required to manually clear an
alarm in the OpenScape Voice system. All of these methods are described in the
following sections.

4.3.1.1 Alarm Clearance via Correlation Trap

OpenScape Voice contains a database and associated logic to correlate most

events of Clear severity to any active alarms that should be cleared when the
specific clear event is generated. The logic involved does a comparison not only
on the event, but may match string and numeric arguments that are part of the
event or trap. A surveillance system can take advantage of this by using the
correlation trap, which is sent as a result of a clear event. If the logic in
OpenScape Voice has determined that any alarms should be cleared, a variable
in this trap contains a list of alarm IDs to be cleared. Refer to Figure 3 on page 30.

4.3.1.2 Alarm Clearance via Trap with Clear Severity

A surveillance system can perform its own alarm correlation by associating clear
traps with related alarm traps. Typically, but not always, the faultyObject trap
variable contains a string that is useful in identifying a specific object or collection
of objects.

4.3.1.3 Manual Alarm Clearance

In order to clear alarms in the OpenScape Voice system, the sequence depicted
in Figure 3 on page 30 is required.

A31003-H8070-T102-1-7618, April, 2012

36 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_msg_flows.fm

4.3.2 Alarm Synchronization

Because SNMP traps are sent via UDP and UDP by nature has no guaranteed
reliability, it is inevitable that some alarm traps will eventually be lost during
transport over the network. Therefore, a mechanism is provided to resynchronize
the OpenScape Voice traps with those present on the surveillance system. In
addition to recovering from lost packets, the mechanism can also be used to
synchronize alarms with the surveillance system upon startup of that system.

Possible methods to detect a mismatch of alarms between the surveillance

system and OpenScape Voice are:

• Lost trap detection

• Periodic audit

It may be desirable to use a combination of the two methods.

4.3.2.1 Lost Trap Detection

While there is a trap sequence number mechanism provided for lost trap
detection, it cannot be totally relied upon. If the last trap that was sent by the
OpenScape Voice system was lost, the surveillance system does not detect the
lost trap until some point in time that OpenScape Voice sends yet another alarm
trap. To avoid this issue, the surveillance system periodically retrieves the value
of rtpEvtFilterLastTransId for a specified IP address.

Another consideration with this method is that if alarms are manually cleared in
OpenScape Voice via one surveillance system, other surveillance systems
monitoring the same OpenScape Voice will not detect the clearing of that alarm
since no trap is sent as a result.

Event Filtering

The RTP event SNMP traps include the rtpEvtFilterLastTransId object.

This transmission ID is handled separately for each filter entry in rtpEvtFil-
terTable. For each trap, which is sent to a particular IP address, the rtpEvt-
FilterLastTransId value is increased by one. Thus, an SNMP manager can
use this object to detect the loss of traps. However, to recover event data of lost
traps, rtpEvtFilterLastTransId cannot be used since there is no persistent
relationship between it and the event’s logRecordID.

The SNMP manager rather has to use the logRecordID of the last received trap
(rtpEvtSequenceNumberIndex or rtpEvtCurrId) as an index for
rtpEvtFil- teredEventTable (see also the description above). If an SNMP
manager re- ceives no traps at all, it should regularly poll the
rtpEvtFilterLastTransId object of the filter entry corresponding to its IP

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 37
snmp_msg_flows.fm

address (in rtpEvtFilterT- able). As long as this object's value is identical to

the last received rtpEvtFil- terLastTransId (as part of a trap), the SNMP
manager knows that its event list is up-to-date.

Lost trap Detection

Background:

The transmission ID is not stored persistently to avoid an additional database

write access for each trap being sent (which can be more than one write access per
received event!). Another effect of this implementation is, the transmission ID will
be reset to 0 each time the subagent starts (and increments after having sent a
trap, respectively). Therefore the transmission ID values can only be used to detect
the loss of traps but not to recover the related event data.

Restart of the subagent:

If the RTP subagent restarts (e.g. after a process crash), the transmission ID will
start at 1 again for the first sent trap. If the SNMP manager detects that rtpE-
vtFilterLastTransId (either as part of a trap or read from rtpEvtFilterT-
able) is less than the last received one, it should recover possibly lost traps using
rtpEvtFilteredEventTable.

Example:

These are the transmission IDs and logRecordIDs in the event traps sent to
11.21.31.41:

rtpEvtFilterLastTransId: rtpEvtrtpEvtCurrId:
1 101
2 103
3 110
4 111 <--- trap gets lost
5 120 <--- trap gets lost

The SNMP manager detects the loss of traps, since it receives the transmission IDs
1, 2 and 5. Now it recovers the logRecordIDs of the lost traps using the last
received logRecordID (rtpEvtSequenceNumberIndex or rtpEvtCurrId)
as index for rtpEvtFetCurrId in rtpEvtFilteredEventTable (for
simplicity reasons the event attributes are omitted in the example):

Manager / GET_NEXT(rtpEvtFetCurrId.4.11.21.31.41.103)
Agent / response: rtpEvtFetCurrId.4.11.21.31.41.110: 110

A31003-H8070-T102-1-7618, April, 2012

38 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_msg_flows.fm

Manager / GET_NEXT(rtpEvtFetCurrId.4.11.21.31.41.110)
Agent / response: rtpEvtFetCurrId.4.11.21.31.41.111: 111

Manager / GET_NEXT(rtpEvtFetCurrId.4.11.21.31.41.111)
Agent / response: rtpEvtFetCurrId.4.11.21.31.41.120: 120

The SNMP manager should not assume that it knows from the gap in the trans-
mission ID values how many traps it has to recover (2 in the above example). It is
safer to read the logRecordIDs until it gets one, which has already been re- ceived
as trap. The SNMP manager then knows for sure that all logRecordIDs belonging
to lost traps have been recovered.

Alternatively, the SNMP manager can determine the logRecordID of the most
recent event trap from rtpEvtFilterLastCurrId. When a response to one of
the manager's GET NEXT requests to rtpEvtFilteredEventTable returns
that logRecordID, the manager is up-to-date again. Using rtpEvtFilterLast-
CurrId could be easier to handle for the SNMP manager especially if during
event recovery - simultaneously - new event traps are received. Note that like
rtpEvtFilterLastTransId, rtpEvtFilterLastCurrId is non-persistent;
after a restart of the subagent, its value is first reset to 0 and is updated to the
logRecordID after having sent a trap, respectively.

Again, for each retrieved rtpEvtFetCurrId, the related full event data can
also be read from the same table specifying the corresponding OIDs in the
same GET NEXT request.

4.3.2.2 Periodic Audit

A simple solution that the NOC uses is to poll for active alarms at startup and
periodically audit the active alarms in OpenScape Voice against the active alarm
list maintained by the NOC. This method is simple and reliable, however, if there
are a large number of alarms present, excessive resources might be used during
the audit, when compared with the lost trap detection, that simply detects a break
in trap sequence numbers. Refer to Figure 7 on page 34.

4.3.3 Alarm Summary

A surveillance system can retrieve the current state of all alarm summaries on the
OpenScape Voice system. For instance, one of the given alarm summaries is for
communication alarms. If any communication alarm type is currently active, the
alarm summary for communication alarms would indicate so. The process of
retrieving alarm summary information is shown in Figure 8 on page 35.

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 39
snmp_traps.fm

5 SNMP Trap Categories

SNMP Traps are categorized into several categories, called Event Sets
(rtpEvtSet). These categories or event sets help organize the faults that are
generated by the OpenScape Voice system into logical areas. These areas are
outlined in the internal hiqTrap.mib file (mib = managed information base) and
provided to users in this section. Table 11 outlines the OpenScape Voice Fault
Management event sets.

For additional information on Event and Alarm Management MIBs, refer to

Chapter 2, “Supported and Unsupported MIBS”.

Section 5.1.1, “hiQAccountMgmtFaultMgt (221)” Section 5.1.12, “hiQSipFaultMgmt (230)”

Section 5.1.2, “hiQAucUscFaultMgmt (182)” Section 5.1.13, “hiQSnmFaultMgt (119)”
Section 5.1.3, “hiQAudFaultMgmt (102)” Section 5.1.14, “hiQSoapServerFaultMgmt (207)”
Section 5.1.4, “hiQCacFaultMgt (231)” Section 5.1.15, “hiQSolidFaultMgt (141)”
Section 5.1.5, “hiQGlobalFaultMgt (217)” Section 5.1.16, “hiQTicFaultMgmt (111)”
Section 5.1.6, “hiQHardwareFaultMgt (219)” Section 5.1.17, “hiQTcaFaultMgt (216)”
Section 5.1.7, “hiQLicensingFaultMgt (220)” Section 5.1.18, “hiQUCEServicesFaultMgmt (193)”
Section 5.1.8, “hiQNmFaultMgt (107)” Section 5.1.19, “hiQTcgFaultMgmt (233)”
Section 5.1.9, “hiQOvlFaultMgmt (190)” Section 5.1.20, “hiQPlatformFaultMgmt (234)”
Section 5.1.10, “hiQSbcFaultMgt (232)” Section 5.1.21, “hiQRapidStatFaultMgmt (235)”
Section 5.1.11, “hiQSecurityFaultMgt (218)” Section 5.1.22, “hiQSmdiFaultMgmt (208)”
Section 5.1.23, “hiQNotificationMgmt (250)”

Table 11 Fault Management Event Sets

5.1 Object Identifier

Object Identifier (OID) is part of the SNMP definition of the trap. For the
OpenScape Voice alarms, the OID is expressed numerically and identifies the
specific alarm. All of the numbers are the same for all OpenScape Voice alarms
with the exception of the last two numbers. The last two numbers represent the
rtpEvtSet and the rtpEvtNum, respectively. Refer to SNMP Trap OID Example:.
The rtpEvtSet is the event (alarm) set or group and the rtpEvtNum is the event
(alarm) number. Refer to Table 11 for a list of OpenScape Voice event sets.

For more information on the RTP event records, refer to Section 3.1.1, “Event
Table”, on page 17.

A31003-H8070-T102-1-7618, April, 2012

40 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

SNMP Trap OID Example:

Trap OID for hiQAccountInactiveTrap is 1.3.6.1.4.1.4329.2.18.2.2.1.47.221.1

– The last two numbers of the trap OID are 221.1, where the 221 represents
the rtpEvtSet and the 1 represents the rtpEvtNum.

Note: The largest event set is 255 and the largest event number is 32767. For the
event set, 1 through 175 are reserved for use by RTP; 176 and above are for
applications.

The sections below outline the SNMP trap name, its object identifier (OID),
corresponding alarm name, severity of the trap, as well as the trap name that can
clear the alarm.

5.1.1 hiQAccountMgmtFaultMgt (221)

Table 12 outlines the SNMP traps that are associated with the Account
Management Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQAccountInactiveTrap Minor Must be cleared manually
1.3.6.1.4.1.4329.2.18.2.2.1.47.221.1
hiQAccountDisabledTrap Minor Must be cleared manually
1.3.6.1.4.1.4329.2.18.2.2.1.47.221.2
hiQAccountDeletedTrap Minor Must be cleared manually
1.3.6.1.4.1.4329.2.18.2.2.1.47.221.3

Table 12 Account Managment Fault Traps

5.1.2 hiQAucUscFaultMgmt (182)

Table 12 outlines the SNMP traps that are associated with the AUC, User
Collection (USC) Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQAucUscServerTxCdrTrap Major hiQAucUscServerInitTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.182.15
hiQAucUscPriStorNotPossibleTrap Warning hiQAucUscPriStorOKTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.182.35
hiQAucUscPriStorOKTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.182.36

Table 13 Auc, User Collection Fault Traps (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 41
snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Number
hiQAucUscSecStorNotPossibleTrap Minor hiQAucUscLocalSecStorageOkTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.182.37
hiQAucUscFileSeqNumberErrorTrap Minor Must be cleared manually
1.3.6.1.4.1.4329.2.18.2.2.1.47.182.38
hiQAucUscLocalSecStorageOk Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.182.39

Table 13 Auc, User Collection Fault Traps (Seite 2 von 2)

5.1.3 hiQAudFaultMgmt (102)

Table 14 outlines the SNMP traps that are associated with the Audit Manager
Faults.

Trap Name Severity Clearing Trap Name

OID Name
hiQAuditStartingTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.1
hiQAudAvailDiskSpBelowCritThld Critical hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.201 hiQAudFileSystemBelowMin1Trap
hiQAudFileSystemBelowMin2Trap
hiQAudFileSystemBelowMin3Trap
hiQAudFileSystemBelowMin4Trap
hiQAudFileSystemAboveMinTrap
hiQAudAvailDiskSpBelowMajorThld Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.202 hiQAudFileSystemBelowMin1Trap
hiQAudFileSystemBelowMin2Trap
hiQAudFileSystemBelowMin3Trap
hiQAudFileSystemBelowMin4Trap
hiQAudFileSystemAboveMinTrap
hiQAudAvailDiskSpBelowMinorThld Minor hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.203 hiQAudFileSystemBelowMin1Trap
hiQAudFileSystemBelowMin2Trap
hiQAudFileSystemBelowMin3Trap
hiQAudFileSystemBelowMin4Trap
hiQAudFileSystemAboveMinTrap
hiQAudFileSystemBelowMin1Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.211
hiQAudFileSystemBelowMin2Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.212
hiQAudFileSystemBelowMin3Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.213
hiQAudFileSystemBelowMin4Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.214

Table 14 Audit Fault Manager Traps (Seite 1 von 6)

A31003-H8070-T102-1-7618, April, 2012

42 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Name
hiQAudFileSystemAboveMinTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.215
hiQAudFileGrpAboveCritThld Critical hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.301 hiQAudFileGroupSizeChange1Trap
hiQAudFileGroupSizeChange2Trap
hiQAudFileGroupSizeChange3Trap
hiQAudFileGroupSizeChange4Trap
hiQAudFileGrpBelowThreshTrap
hiQAudFileGrpAboveMajorThld Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.302 hiQAudFileGroupSizeChange1Trap
hiQAudFileGroupSizeChange2Trap
hiQAudFileGroupSizeChange3Trap
hiQAudFileGroupSizeChange4Trap
hiQAudFileGrpBelowThreshTrap
hiQAudFileGrpAboveMinorThld Minor hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.303 hiQAudFileGroupSizeChange1Trap
hiQAudFileGroupSizeChange2Trap
hiQAudFileGroupSizeChange3Trap
hiQAudFileGroupSizeChange4Trap
hiQAudFileGrpBelowThreshTrap
hiQAudFileGroupSizeChanged1Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.311
hiQAudFileGroupSizeChanged2Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.312
hiQAudFileGroupSizeChanged3Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.313
hiQAudFileGroupSizeChanged4Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.314
hiQAudFileGrpBelowThreshTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.315
hiQAudProcHeapAboveCritThld Critical hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.401 hiQAudProcStackSizeOkTrap
hiQAudProcStackSizeChanged1Trap
hiQAudProcStackSizeChanged2Trap
hiQAudProcStackSizeChanged3Trap
hiQAudProcStackSizeChanged4Trap
hiQAudProcRunningTrap
hiQAudProcHeapAboveMajorThld Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.402 hiQAudProcHeapSizeOkTrap
hiQAudProcHeapSizeChanged1Trap
hiQAudProcHeapSizeChanged2Trap
hiQAudProcHeapSizeChanged3Trap
hiQAudProcHeapSizeChanged4Trap
hiQAudProcRunningTrap
Table 14 Audit Fault Manager Traps (Seite 2 von 6)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 43
snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Name
hiQAudProcHeapAboveMinorThld Minor hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.403 hiQAudProcHeapSizeOkTrap
hiQAudProcHeapSizeChanged1Trap
hiQAudProcHeapSizeChanged2Trap
hiQAudProcHeapSizeChanged3Trap
hiQAudProcHeapSizeChanged4Trap
hiQAudProcRunningTrap
hiQAudProcHeapSizeChanged1Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.411
hiQAudProcHeapSizeChanged2Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.412
hiQAudProcHeapSizeChanged3Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.413
hiQAudProcHeapSizeChanged4Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.414
hiQAudProcHeapSizeOkTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.415
hiQAudProcStackAboveCritThld Critical hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.421 hiQAudProcStackSizeChanged1Trap
hiQAudProcStackSizeChanged2Trap
hiQAudProcStackSizeChanged3Trap
hiQAudProcStackSizeChanged4Trap
hiQAudProcStackSizeOkTrap
hiQAudProcRunningTrap
hiQAudProcStackAboveMajorThld Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.422 hiQAudProcStackSizeChanged1Trap
hiQAudProcStackSizeChanged2Trap
hiQAudProcStackSizeChanged3Trap
hiQAudProcStackSizeChanged4Trap
hiQAudProcStackSizeOkTrap
hiQAudProcRunningTrap
hiQAudProcStackAboveMinorThld Minor hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.423 hiQAudProcStackSizeChanged1Trap
hiQAudProcStackSizeChanged2Trap
hiQAudProcStackSizeChanged3Trap
hiQAudProcStackSizeChanged4Trap
hiQAudProcStackSizeOkTrap
hiQAudProcessRunningTrap
hiQAudProcStackSizeChanged1Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.431
hiQAudProcStackSizeChanged2Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.432
hiQAudProcStackSizeChanged3Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.433
hiQAudProcStackSizeChanged4Trap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.434
Table 14 Audit Fault Manager Traps (Seite 3 von 6)

A31003-H8070-T102-1-7618, April, 2012

44 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Name
hiQAudProcStackSizeOkTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.435
hiQAudOSProcNotRunningTrap Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.481 hiQAudProcessRunningTrap
hiQAudOSProcInstanceNotRunningTrap Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.482 hiQAudProcessRunningTrap
hiQAudProcNotRunningCriticalTrap Critical hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.491 hiQAudProcessRunningTrap
hiQAudProcessNotRunningMajorTrap Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.492 hiQAudProcessRunningTrap
hiQAudProcessNotRunningMinorTrap Minor hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.493 hiQAudProcessRunningTrap
hiQAudProcessRunningTrap Clear Refer to Table 21 for additional information.
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.496
hiQAudCPUUtilAboveCritThld Critical hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.620 hiQAudCPUUtilTrap
hiQAudCPUUtilBelowThreshTrap
hiQAudCPUUtilChangedTrap
hiQAudCPUUtilAboveMajorThld Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.621 hiQAudCPUUtilTrap
hiQAudCPUUtilBelowThreshTrap
hiQAudCPUUtilChangedTrap
hiQAudCPUUtilAboveMinorThld Minor hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.622 hiQAudCPUUtilTrap
hiQAudCPUUtilBelowThreshTrap
hiQAudCPUUtilChangedTrap
hiQAudCPUUtilTrap Info N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.628
hiQAudCPUUtilBelowThreshTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.629
hiQAudCPUUtilChangedTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.630
hiQAudSwapSpaceAboveCritThld Critical hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.640 hiQAudSwapUtilTrap
hiQAudSwapUtilBelowThreshTrap
hiQAudSwapUtilChangedTrap
hiQAudSwapSpaceAboveMajorThld Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.641 hiQAudSwapUtilTrap
hiQAudSwapUtilBelowThreshTrap
hiQAudSwapUtilChangedTrap
hiQAudSwapSpaceAboveMinorThld Minor hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.642 hiQAudSwapUtilTrap
hiQAudSwapUtilBelowThreshTrap
hiQAudSwapUtilChangedTrap
Table 14 Audit Fault Manager Traps (Seite 4 von 6)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 45
snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Name
hiQAudSwapUtilTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.648
hiQAudSwapUtilBelowThreshTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.649
hiQAudSwapUtilChangedTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.650
hiQAudShMemUtilTooAboveCrit Critical hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.680 hiQAudShMemUtilTrap
hiQAudShMemUtilBelowThreshTrap
hiQAudShMemUtilChangedTrap
hiQAudShMemUtilTooAboveMajor Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.681 hiQAudShMemUtilTrap
hiQAudShMemUtilBelowThreshTrap
hiQAudShMemUtilChangedTrap\
hiQAudShMemUtilTooAboveMinor Minor hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.682 hiQAudShMemUtilTrap
hiQAudShMemUtilBelowThreshTrap
hiQAudShMemUtilChangedTrap
hiQAudShMemUtilTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.688
hiQAudShMemUtilBelowThreshTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.689
hiQAudShMemUtilChangedTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.690
hiQAudSemUtilAboveCritThld Critical hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.700 hiQAudSemUtilTrap
hiQAudSemUtilBelowThreshTrap
hiQAudSemUtilChangedTrap
hiQAudSemUtilAboveMajorThld Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.701 hiQAudSemUtilTrap
hiQAudSemUtilBelowThreshTrap
hiQAudSemUtilChangedTrap
hiQAudSemUtilAboveMinorThld Minor hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.702 hiQAudSemUtilTrap
hiQAudSemUtilBelowThreshTrap
hiQAudSemUtilChangedTrap
hiQAudSemUtilTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.708
hiQAudSemUtilBelowThreshTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.709
hiQAudSemUtilChangedTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.710
Table 14 Audit Fault Manager Traps (Seite 5 von 6)

A31003-H8070-T102-1-7618, April, 2012

46 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Name
hiQAudSwapFrequencyAboveCritThld Critical hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.720 hiQAudSwapFrequencyUtilTrap
hiQAudSwapFrequencyBelowThreshTrap
hiQAudSwapFrequencyUtilChangedTrap
hiQAudSwapFrequencyAboveMajorThld Major hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.721 hiQAudSwapFrequencyUtilTrap
hiQAudSwapFrequencyBelowThreshTrap
hiQAudSwapFrequencyUtilChangedTrap
hiQAudSwapFrequencyAboveMinorThld Minor hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.722 hiQAudSwapFrequencyUtilTrap
hiQAudSwapFrequencyBelowThreshTrap
hiQAudSwapFrequencyUtilChangedTrap
hiQAudSwapFrequenyAboveWarningThld Warning hiQAuditStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.723 hiQAudSwapFrequencyUtilTrap
hiQAudSwapFrequencyBelowThreshTrap
hiQAudSwapFrequencyUtilChangedTrap
hiQAudSwapFrequencyUtilTrap Clear hiQAudSwapFrequencyAboveCritThld
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.728 hiQAudSwapFrequencyAboveMajorThld
hiQAudSwapFrequencyAboveMinorThld
hiQAudSwapFrequenyAboveWarningThld
hiQAudSwapFrequencyBelowThreshTrap Clear hiQAudSwapFrequencyAboveCritThld
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.729 hiQAudSwapFrequencyAboveMajorThld
hiQAudSwapFrequencyAboveMinorThld
hiQAudSwapFrequenyAboveWarningThld
hiQAudSwapFrequencyUtilChangedTrap Clear hiQAudSwapFrequencyAboveCritThld
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.730 hiQAudSwapFrequencyAboveMajorThld
hiQAudSwapFrequencyAboveMinorThld
hiQAudSwapFrequenyAboveWarningThld
Table 14 Audit Fault Manager Traps (Seite 6 von 6)

5.1.4 hiQCacFaultMgt (231)

Table 15 outlines the SNMP traps that are associated with the call admission
control (CAC) Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQCacHighThreshTrap Major hiQCacLowThreshTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.231.1
hiQCacLowThreshTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.231.2

Table 15 CAC Fault Traps

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 47
snmp_traps.fm

5.1.5 hiQGlobalFaultMgt (217)

Table 16 outlines the SNMP traps that are associated with the Global Fault
Mangement.

Trap Name Severity Clearing Trap Name

OID Number
hiQGlobalCriticalLossOfCommsTrap Critical hiQGlobalCommsEstablished
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.1
hiQGlobalMajorLossOfCommsTrap Major hiQGlobalCommsEstablished
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.2
hiQGlobalMinorLossOfCommsTrap Minor hiQGlobalCommsEstablished
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.3
hiQGlobalCommsEstablishedTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.4
hiQGlobalProcessInitActiveTrap Clear Refer to Table 21 for additional information.
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.5
hiQGlobalProcSevereInitFailTrap Major hiQGlobalProcessInitActiveTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.6
hiQGlobalProcPartialInitFailTrap Major hiQGlobalProcessInitActiveTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.7
hiQGlobalProcAbnormalTermTrap Major hiQGlobalProcessInitActiveTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.8
hiQGlobalProcessAliasGrpAvail Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.9 NOTE: Only sent when there is a corresponding alarm.
One global clear at startup.
hiQGlobalProcessAliasGrpUnavail Critical hiQGlobalProcessAliasGrpAvail
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.10 NOTE: OpenScape Voice system remembers that such
an alarm was sent.
hiQGlobalResourceExceedLimitTrap Minor hiQGlobalResourceWithinLimitTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.11
hiQGlobalResourceWithinLimitTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.12
hiQVeryImportantFuncUnavailTrap Critical hiQGlobalFuncAvailTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.13
hiQImportantFuncUnavailTrap Major hiQGlobalFuncAvailTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.14
hiQGlobalFuncUnavailTrap Minor hiQGlobalFuncAvailTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.15
hiQGlobalFuncAvailTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.16
hiQGlobalMsgQueueAboveHigh Critical hiQGlobalMsgQueueBelowThld
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.17
hiQGlobalMsgQueueAboveMed Major hiQGlobalMsgQueueBelowThld
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.18

Table 16 Global Fault Management Traps (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

48 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Number
hiQGlobalMsgQueueAboveLow Minor hiQGlobalMsgQueueBelowThld
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.19
hiQGlobalMsgQueueBelow Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.20
hiQGlobalVerySevereDegradedCommsTrap Critical hiQGlobalCommsOperationalTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.21
hiQGlobalSevereDegradedCommsTrap Major hiQGlobalCommsOperationalTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.22
hiQGlobalDegradedCommsTrap Minor hiQGlobalCommsOperationalTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.23
hiQGlobalCommsOperationalTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.24
hiQOperationModeStateChange Warning N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.25
hiQMinorOperationModeStateChange Minor hiQNormalOperationMode
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.26
hiQMajorOperationModeStateChange Major hiQNormalOperationMode
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.27
hiQCritOperationModeStateChange Critical hiQNormalOperationMode
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.28
hiQNormalOperationMode Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.29
hiQResourceMediumLimitExceeded Major hiQGlobalResourceWithinLimitTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.30
hiQResourceHIghLimitExceeded Critical hiQGlobalResourceWithinLimitTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.31

Table 16 Global Fault Management Traps (Seite 2 von 2)

5.1.6 hiQHardwareFaultMgt (219)

Table 17 outlines the SNMP traps that are associated with the Hardware Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQVerySevereHardwareFailureTrap Critical hiQHardwareInServiceTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.219.1
hiQSevereHardwareTrap Major hiQHardwareInServiceTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.219.2
hiQHardwareFailureTrap Minor hiQHardwareInServiceTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.219.3

Table 17 Hardware Managment Fault Traps (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 49
snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Number
hiQHardwareInServiceTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.219.4

Table 17 Hardware Managment Fault Traps (Seite 2 von 2)

5.1.7 hiQLicensingFaultMgt (220)

Table 18 outlines the SNMP traps that are associated with the Licensing Faults.
Note that the FaultyObject attribute associated with the following traps will
indicate the specific license type with the problem, i.e. FaultyObject = Resource
OSMO.

Trap Name Severity Clearing Trap Name

OID Number
hiQLicensesExceededTrap Critical hiQLicenseCountOkTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.220.1
hiQLicenseCountOkTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.220.2
hiQLicenseCountMismatchTrap Major hiQLicenseCountSyncTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.220.3
hiQLicenseCountSyncTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.220.4
hiQLicenseSessionsTrap Minor hiQLicenseSessionCountOkTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.220.5
hiQLicenseSessionCountOkTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.220.6
hiQLicenseRestoreTrap Minor hiQLicenseRestoreOkTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.220.7

Table 18 License Fault Traps

5.1.8 hiQNmFaultMgt (107)

Table 19 outlines the SNMP traps that are associated with the Node Manager
Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQNmProcessInitCompleteTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.1
hiQNmDbUnreachable1Trap Critical hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.5 hiQNmProcessInitCompleteTrap

Table 19 Node Manager Fault Traps (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

50 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Number
hiQNmDbMaxProcGrpExceededTrap Major hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.8 hiQNmProcessInitCompleteTrap
hiQNmDbUnreachable2Trap Critical hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.9 hiQNmProcessInitCompleteTrap
hiQNmDbTableNotOpenedTrap Major hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.10 hiQNmProcessInitCompleteTrap
hiQNmDbTableNotClosedTrap Major hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.11 hiQNmProcessInitCompleteTrap
hiQNmProcessReadyTimeoutTrap Major hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.12 hiQNmProcessInitCompleteTrap
hiQNmProcessHealthChkTimeoutTrap Major hiQNmProcessInitCompleteTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.13 hiQNmNodeMgrStartingTrap
hiQNmNodeShutdownTrap Major hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.19
hiQNmQueueCorruptedTrap Major hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.22 hiQNmProcessInitCompleteTrap
hiQNmNodeMgrStartingTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.31
hiQNmProcessRestartShortTimeTrap Major hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.36 hiQNmProcessInitCompleteTrap
hiQNmQueueAllocErrorTrap Major hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.39 hiQNmProcessInitCompleteTrap
hiQNmResizeGlobalProcTblTrap Critical hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.42 hiQNmProcessInitCompleteTrap
hiQNmAliasTableLenExceededTrap Critical hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.43 hiQNmProcessInitCompleteTrap
hiQNmAliasMembersExceededTrap Critical hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.44 hiQNmProcessInitCompleteTrap
hiQNmProcessExecvErrorTrap Major hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.46 hiQNmProcessInitCompleteTrap
hiQNmProcessExitedwithCodeTrap Warning hiQNmProcessInitCompleteTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.47 hiQNmNodeMgrStartingTrap
hiQNmProcessCoreCreatedTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.49
hiQNmDiagnosticErrorTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.53
hiQNmNodeDownMsgErrorTrap Critical hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.102
hiQNmNodeMgrSignalRestartTrap Major hiQNmNodeMgrStartingTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.104

Table 19 Node Manager Fault Traps (Seite 2 von 2)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 51
snmp_traps.fm

5.1.8.1 Failed Software Processes

Table 20 outlines the SNMP traps that are reported when software processes fail.
It is recommended that the OpenScape Voice surveillance Operations Support
System (OSS) logs these events and informs the craft about an unusual number
of occurrences. For example, more than five in one hour and/or more than one
per day for more than seven days.

Also, as routine maintenance, customer service should periodically use these

events to analyze the RTP dump logs and stored Pstacks.

Note: In general, warning traps are not stored in the OpenScape Voice alarm
database and, therefore, there is no alarm correlation trap when the faulty
condition is cleared (most likely by a successful process restart).

Trap Name Severity Clearing Trap Name

OID Number
hiQNmProcessExitedwithCodeTrap Warning see Note above (page 52)
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.47
Table 20 SNMP Traps Reported When Software Processes Fail

When an OpenScape Voice process writes a Pstack, it usually terminates itself

with signal 9 afterward, which is reported with event
hiQNmProcessTerminatedBySignalTrap (107-48); however, sometimes the
process failure is reported with hiQNmProcessExitedTrap (107-3).

A process in an endless loop or deadlock is stopped by the RTP healthcheck

hiQNmProcessHealthChkTimeoutTrap (107-13). This event is followed by
another event reporting the process termination, e.g., hiQNmProcessExitedTrap
(107-3).

Failed software processes restart automatically, which are reported with one or
more of the following clearance traps outlined in Table 21.

Clearing Trap Name Severity Trap Name

OID Number
hiQNmProcessInitCompleteTrap Clear Related to 107.3 and 107.48 in Table 20
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.1
hiQNmNodeMgrStartingTrap Clear Related to 107.3 and 107.48 in Table 20
1.3.6.1.4.1.4329.2.18.2.2.1.47.107.13
hiQGlobalProcessInitActiveTrap Clear
1.3.6.1.4.1.4329.2.18.2.2.1.47.217.5
hiQAudProcessRunningTrap Clear
1.3.6.1.4.1.4329.2.18.2.2.1.47.102.496
Table 21 Clearance Traps for Failed Software Processes

A31003-H8070-T102-1-7618, April, 2012

52 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

5.1.9 hiQOvlFaultMgmt (190)

Table 22 outlines the SNMP traps that are associated with the Overload Manager
Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQOvlCongLevelToCL3Trap Major hiQOvlCongLevelChangeTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.190.2
hiQOvlCongLevelToCL2Trap Minor hiQOvlCongLevelChangeTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.190.3
hiQOvlCongLevelToCL1Trap Minor hiQOvlCongLevelChangeTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.190.4
hiQOvlCongLevelToCL0Trap Info N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.190.5
hiQOvlCongLevelChangeTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.190.10

Table 22 Overload Fault Manager Traps

5.1.10 hiQSbcFaultMgt (232)

Table 23 outlines the SNMP traps that are associated with the session border
controller (SBC) Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQSbcVerySevereAlarmTrap Critical hiQSbcClearTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.232.1
hiQSbcSevereAlarmTrap Major hiQSbcClearTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.232.2
hiQSbcAlarmTrap Minor hiQSbcClearTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.232.3
hiQSbcTrap Warning N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.232.4
hiQSbcClearTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.232.5

Table 23 SBC Fault Traps

5.1.11 hiQSecurityFaultMgt (218)

Table 24 outlines the SNMP traps that are associated with the Security Manager
Faults.

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 53
snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Number
hiQSecurityFirewallTrigTrap Critical hiQSecurityFirewallTrigClearTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.218.1
hiQSecurityFirewallTrigClearTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.218.2

Table 24 Security Fault Manager Traps

5.1.12 hiQSipFaultMgmt (230)

Table 27 outlines the SNMP traps that are associated with the SIP faults.

Trap Name Severity Clearing Trap Name

OID Number
hiPathSIPCounterAboveHighThld Major hiPathSIPCounterBelowThld
1.3.6.1.4.1.4329.2.18.2.2.1.47.230.1
hiPathSIPCounterAboveLowThld Minor N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.230.2
hiPathSIPCounterBelowThld Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.230.3

Table 25 Service Registration Traps

5.1.13 hiQSnmFaultMgt (119)

Table 26 outlines the SNMP traps that are associated with the Super Node
Subsystem Manager Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQSnmSubsysAlreadyRunningTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.1
hiQSnmSubsystemStartErrorTrap Minor hiQSnmStartupSuccessTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.2 hiQSnmSubsysAlreadyRunningTrap
hiQSnmSubysytemStartSuccessTrap
hiQSnmSubsysRestartSuccessTrap
hiQSnmSubsysAdmInterventionTrap Major hiQSnmStartupSuccessTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.7 hiQSnmSubsysAlreadyRunningTrap
hiQSnmSubysytemStartSuccessTrap
hiQSnmRtpRestartforSubsystemTrap Major hiQSnmStartupSuccessTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.10 hiQSnmSubysytemStartSuccessTrap
hiQSnmSubsysAlreadyRunningTrap

Table 26 Super Node Manager Traps (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

54 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Number
hiQSnmRebootForSubsystemTrap Critical hiQSnmStartupSuccessTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.11
hiQSnmSystemSwitchOffTrap Critical hiQSnmStartupSuccessTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.13
hiQSnmSpecialActScrExecTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.119-14
hiQSnmSpecialActScrSuccessTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.18
hiQSnmStartupSuccessTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.22
hiQSnmStartupFailedTrap Major hiQSnmStartupSuccessTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.39 hiQSnmSubsysAlreadyRunningTrap
hiQSnmSubysytemStartSuccessTrap
hiQSnmSubsysRestartSuccessTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.45
hiQSnmRtpNodeUpTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.100
hiQSnmRtpNodeUpWasDownTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.101
hiQSnmRtpNodeDownTrap Major hiQSnmRtpNodeUpWasDownTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.102 hiQSnmRtpNodeUpTrap
hiQSnmRtpNodeDownWasUpTrap Major hiQSnmRtpNodeUpTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.119.103 hiQSnmRtpNodeUpWasDownTrap

Table 26 Super Node Manager Traps (Seite 2 von 2)

5.1.14 hiQSoapServerFaultMgmt (207)

Table 27 outlines the SNMP traps that are associated with the Soap Server
Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQSubMgmtRemoveResourceError Minor hiQSubMgmtRemoveResourceSuccessTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.207.5
hiQSubMgmtRemoveResourceSuccess Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.207.6
Table 27 Subscriber Manager (SOAP) Traps

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 55
snmp_traps.fm

5.1.15 hiQSolidFaultMgt (141)

Table 28 outlines the SNMP traps that are associated with the Solid Database
Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQSolidTooManyClientsTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.12
hiQSolidNewConnsAllowedTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.13
hiQSolidNoNewConnsAllowedTrap Major hiQSolidNewConnsAllowedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.20
hiQSolidShutdownTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.105
hiQSolidServerStartFailedTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.120
hiQSolidFlowEngineIntErrorTrap Major hiQSolidFlowEngineStartedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.130
hiQSolidFatalErrSrvShutdownTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.149
hiQSolidFatalErrSrvNotStartTrap Major hiQSolidFlowEngineStartedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.150
hiQSolidDatabaseStartedTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.151
hiQSolidDbConvertedTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.201
hiQSolidOldDbVersionTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.204
hiQSolidNewDbNotCreatedTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.205
hiQSolidDbDoesNotExistsTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.206
hiQSolidDbOpenFailureTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.207
hiQSolidDbIndexTestSuccessTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.224
hiQSolidDbIndexErrorTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.225
hiQSolidDbTstOpenFailureTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.226
hiQSolidDbTstConnectFailureTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.227
hiQSolidCreateNewDbFailedTrap Major hiQSolidDatabaseStartedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.240

Table 28 Solid Database Traps (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

56 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Number
hiQSolidTableConvertedTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.247
hiQSolidDbOpeningProblemTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.249
hiQSolidDbBrokenCopyTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.254
hiQSolidBackupFailedTrap Major hiQSolidBackupSuccessTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.304
hiQSolidStartedHSBPrimaryTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.500
hiQSolidStartedHSBSecondaryTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.501
hiQSolidHSBSwitchPrimErrTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.512
hiQSolidHSBSwitchSecErrTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.513
hiQSolidBothHSBDbPrimaryTrap Major hiQSolidStartedHSBPrimaryTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.515
hiQSolidDbServerCorruptTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.1101
hiQSolidLocalDbServerCorruptTrap Major Must be cleared manually.
1.3.6.1.4.1.4329.2.18.2.2.1.47.141.1103

Table 28 Solid Database Traps (Seite 2 von 2)

5.1.16 hiQTicFaultMgmt (111)

Table 29 outlines the SNMP traps that are associated with the RTP Ticket
Manager Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQTicDiskFullTicketPoolFailed Major N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.111.7
hiQTicCopyToTicketPoolFailed Major hiQNmProcessInitCompleteTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.111.23 111-265
hiQTicPoolDiskDevNotAccessible Critical hiQNmProcessInitCompleteTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.111.47

Table 29 RTP Ticket Manager Traps

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 57
snmp_traps.fm

5.1.17 hiQTcaFaultMgt (216)

Warnings generally do not show up in correlation traps which is why Minor/Major
Threshold Crossing Alarm (TCA) traps will automatically disappear, while a
Warning TCA either never clears (when the OSS relies on correlation traps) or
disappears after a couple of minutes (when the OSS runs an alarm
synchronization with the OpenScape Voice alarm database). However, the TCA
Generation subsystem can generate warning traps for certain log categories
(refer to Section 5.1.8.1, “Failed Software Processes”).

Table 30 outlines the SNMP traps that are associated with the Threshold
Crossing Alarm (TCA) Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQTcaL3CommunicationTrap Major hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.1
hiQTcaL2CommunicationTrap Minor hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.2
hiQTcaL1CommunicationTrap Warning hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.3
hiQTcaL3ServiceTrap Major hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.4
hiQTcaL2ServiceTrap Minor hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.5
hiQTcaL1ServiceTrap Warning hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.6
hiQTcaL3ProcessingTrap Major hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.7
hiQTcaL2ProcessingTrap Minor hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.8
hiQTcaL1ProcessingTrap Warning hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.9
hiQTcaL3EquipmentTrap Major hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.10
hiQTcaL2EquipmentTrap Minor hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.11
hiQTcaL1EquipmentTrap Warning hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.12
hiQTcaL3EnvironmentTrap Major hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.13
hiQTcaL2EnvironmentTrap Minor hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.14
hiQTcaL1EnvironmentTrap Warning hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.15

Table 30 Threshold Crossing Alarm (TCA) Fault Traps (Seite 1 von 3)

A31003-H8070-T102-1-7618, April, 2012

58 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Number
hiQTcaL3DatabaseTrap Major hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.16
hiQTcaL2DatabaseTrap Minor hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.17
hiQTcaL1DatabaseTrap Warning hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.18
hiQTcaL3MibTrap Major hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.19
hiQTcaL2MibTrap Minor hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.20
hiQTcaL1MibTrap Warning hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.21
hiQTcaL3SecurityTrap Major hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.25
hiQTcaL2SecurityTrap Minor hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.26
hiQTcaL1SecurityTrap Warning hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.27
hiQTcaL3IndicationTrap Major hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.31
hiQTcaL2IndicationTrap Minor hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.32
hiQTcaL1IndicationTrap Warning hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.33
hiQTcaL4CommunicationTrap Critical hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.34
hiQTcaL4ServiceTrap Critical hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.35
hiQTcaL4ProcessingTrap Critical hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.36
hiQTcaL4EquipmentTrap Critical hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.37
hiQTcaL4EnvironmentTrap Critical hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.38
hiQTcaL4DatabaseTrap Critical hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.39
hiQTcaL4MibTrap Critical hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.40
hiQTcaL4SecurityTrap Critical hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.41
hiQTcaL4IndicationTrap Critical hiQTcaClearedTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.42

Table 30 Threshold Crossing Alarm (TCA) Fault Traps (Seite 2 von 3)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 59
snmp_traps.fm

Trap Name Severity Clearing Trap Name

OID Number
hiQTcaClearedTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.216.100

Table 30 Threshold Crossing Alarm (TCA) Fault Traps (Seite 3 von 3)

5.1.18 hiQUCEServicesFaultMgmt (193)

Table 27 outlines the SNMP traps that are associated with the service registration
faults.

Note: This trap is used for any service registration.

Trap Name Severity Clearing Trap Name

OID Number
hiQUCEServicesRegistrationFailedTrap Major UCE services failed registration.
1.3.6.1.4.1.4329.2.18.2.2.1.47.193.2 hiQUCEServicesRegisteringTrap
hiQUCEServicesRegisteringTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.193.5

Table 31 Service Registration Traps

5.1.19 hiQTcgFaultMgmt (233)

Table 32 outlines the SNMP traps that are associated with the Test Call Generator
Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQTestCallGeneratorOkTrap Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.233.1
hiQTestCallGeneratorProvErrTrap Major hiQTestCallGeneratorOkTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.233.2
hiQTestCallGenOverloadDetTrap Warning hiQTestCallGeneratorOkTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.233.3
hiQTestCallGeneratorNotOkTrap Major hiQTestCallGeneratorOkTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.233.4
hiQTestCallGenNotOkProcRestart Major hiQTestCallGeneratorOkTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.233.5
hiQTestCallGenNotOkNodeRestart Critical hiQTestCallGeneratorOkTrap
1.3.6.1.4.1.4329.2.18.2.2.1.47.233.6

Table 32 Test Call Generator Fault Traps

A31003-H8070-T102-1-7618, April, 2012

60 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_traps.fm

5.1.20 hiQPlatformFaultMgmt (234)

Table 33 outlines the SNMP traps that are associated with the Rolling Process
Restart and Node Recovery Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQRollingProcessRestart Major hiQRollingProcessRestartAlarmReset
1.3.6.1.4.1.4329.2.18.2.2.1.47.234.1
hiQRollingProcessRestartAlarmReset Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.234.2
hiQNoMoreRollingProcessRestarts Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.234.3
hiQNodeRecoveryByRestart Critical hiQNodeRecovery
1.3.6.1.4.1.4329.2.18.2.2.1.47.234.4 hiQNodeRecoveryFailed
hiQNodeDownAfterFailedRecovery Critical hiQNoMoreRollingProcessRestarts
1.3.6.1.4.1.4329.2.18.2.2.1.47.234.5 hiQNodeRecovery
hiQNodeRecovery Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.234.6
hiQNodeRecoveryFailed Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.234.7

Table 33 Rolling Process Restart and Node Recovery Fault Traps

5.1.21 hiQRapidStatFaultMgmt (235)

Table 34 outlines the SNMP traps that are associated with the RapidStat Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQRapidStatStarting Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.235.1
hiQRapidStatWarningsFound Warning hiQRapidStatStarting
1.3.6.1.4.1.4329.2.18.2.2.1.47.235.2
hiQRapidStatErrorsFound Minor hiQRapidStatStarting
1.3.6.1.4.1.4329.2.18.2.2.1.47.235.3
hiQRapidStatSevereErrorsFound Major hiQRapidStatStarting
1.3.6.1.4.1.4329.2.18.2.2.1.47.235.4
hiQRapidStatVerySevereErrorsFound Critical hiQRapidStatStarting
1.3.6.1.4.1.4329.2.18.2.2.1.47.235.5

Table 34 RapidStat Fault Traps

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 61
snmp_traps.fm

5.1.22 hiQSmdiFaultMgmt (208)

Table 35 outlines the SNMP traps that are associated with the SMDI (Simplified
Message Desk Interface) Faults.

Trap Name Severity Clearing Trap Name

OID Number
hiQSmdiREcvIPAddrPortError Major hiQSmdiRecvIPAddrPortOk
1.3.6.1.4.1.4329.2.18.2.2.1.47.208.7
hiQSmdiRecvIPAddrPortOk Clear N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.208.8

Table 35 SMDI Fault Traps

5.1.23 hiQNotificationMgmt (250)

Table 36 outlines the SNMP traps that are associated with the OSV processing
an Emergency Call. The FaultyObject attribute identifies the endpoint and DN that
made the emergency call, e.g.
"FaultyObject = Endpoint/5619232258/100.22.3.17: Emergency Call from
Endpoint DN 5619232258 to Emergency Number 911. <free form text with
additional information>"

Trap Name Severity Clearing Trap Name

OID Number
hiQEmergencycallidtrap Warning N/A
1.3.6.1.4.1.4329.2.18.2.2.1.47.250.1
Table 36 Notification (Emergency Call) Trap

A31003-H8070-T102-1-7618, April, 2012

62 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

6 SNMP Performance Measurements

6.1 OpenScape Voice MIBs

SNMP Performance Measurements are required to support third party Network
Operations Centers (NOC), operated by either customers or via Siemens
Enterprise Communications Managed Service Offerings. The reporting
enhancements consist of the following existing measurements and associated
MIBs:

OpenScape Voice MIBs

• SIP

• MGCP

• UCE

• Services

• Session Licenses for Trunking and SIPQ

• SNMP V2 MIBs

• IF-MIB II

• IP-MIB II

• TCP - MIB II

• UDP - MIB II

• SNMP - MIB II

• UCD-SNMP-MIB

The following sections outlines the details and information regarding each MIBs’
reporting counters/measurements. The Object Identifier (OID) is provided for
each measurement/count. Refer to Section 5.1, “Object Identifier”, on page 40 for
more information.

6.1.1 SIP Signaling Manager Statistics

Attention: The applicable SNMP MIB is us_srxSip.mib.

These statistics include User Agent (UA) Client, User Agent (UA) Server, and
Proxy. Table 37 outlines the available SNMP SIP performance statistics and
measurement parameters.

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 63
snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerfInviteMsgsSentByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.1

This value identifies the count of INVITE messages sent from the SIP Client.

Priority: 1-Critical Service Affecting

Operator Hint: Monitor for abnormal low
usSrxSipPerfUACRcv4xx6xxSubs Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.39

This value identifies the 4xx-6xx for SUBSCRIBE messages received by the
SIP Client. Possible errors are Client, Server, or Global.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerf100TryingMsgsRcvdByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.2

This value identifies the 100 TRYING messages received by the SIP Client.
The request has been received and continues to process the request.

Priority: 6-Engineering Info

usSrxSipPerfUACSntInfo Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.40

This value identifies the INFO messages (DTMF digits) sent by the SIP
Client.

Priority: 6-Engineering Info

usSrxSipPerf180RingingMsgsRcvdByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.3

This value identifies the 180 RINGING messages received by the SIP Client.
The request has been received and continues to process.

Priority: 6-Engineering Info

usSrxSipPerfUACRcv200OKInfo Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.41

This value identifies the 200 OK for INFO messages received by the SIP
Client. The INFO was successfully received, understood, and accepted

Priority: 6-Engineering Info

Table 37 SIP Signaling Manager Measurement Parameters (Seite 1 von 14)

A31003-H8070-T102-1-7618, April, 2012

64 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerf200OKForInviteMsgsRcvdByCli Interaction: Read Only
ent Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.4

This value identifies the 200 OK for INVITE messages received by the SIP
Client. The action was successfully received, understood, and accepted.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low.
usSrxSipPerfUACRcv300Multiple Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.42

This value identifies the 300 MULTIPLE CHOICES messages received by

the SIP Client (i.e., redirected).

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerf301MsgsRcvdByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.5

This value identifies the 301 (Moved Permanently) messages received by the
SIP Client (i.e., redirected).

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerfUASRcvRefer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.43

This value identifies the REFER messages received by the SIP Server.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerf302MsgsRcvdByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.6

This value identifies the 302 (Moved Temporarily) messages received by the
SIP Client (i.e., redirected).

Priority: 6-Engineering Info

usSrxSipPerfUASSnt202Accepted Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.44

This value identifies the 202 ACCEPTED messages sent by the SIP Server.
The REFER was successfully received, understood, and accepted.

Priority: 6-Engineering Info

Table 37 SIP Signaling Manager Measurement Parameters (Seite 2 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 65
snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerfAckForInviteMsgsSentByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.7

This value identifies the Ack for INVITE messages sent by the SIP Client.
Acknowledgement (handshake) is done and a call is going to be setup.

Priority: 6-Engineering Info.

usSrxSipPerfUASSnt4xx6xxRefer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.45

This value identifies the 4xx-6xx for REFER messages sent by the SIP
Server. Possible errors are Client, Server, or Global

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerfAckForErrorMsgsSentByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.8

This value identifies the Ack For ERROR messages sent by the SIP Client.
Acknowledgement (handshake) is done and a call is going to be setup.

Priority: 6-Engineering Info.

usSrxSipPerfUASRcvNotify Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.46

This value identifies the NOTIFY messages received by the SIP Server.
There has been a service session status change.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerfErrorMsgsRcvdByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.9

This value identifies the ERROR messages received by the SIP Client.
Possible errors are Client, Server, or Global.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high.

Table 37 SIP Signaling Manager Measurement Parameters (Seite 3 von 14)

A31003-H8070-T102-1-7618, April, 2012

66 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerfUASSnt200OKNotify Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.47

This value identifies the 200OK for NOTIFY messages sent by the SIP
Server. There has been a service session status change. The action was
successfully received, understood, and accepted.

Priority: 6-Engineering Info

usSrxSipPerfByeMsgsSentByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.10

This value identifies the BYE messages Sent by the SIP Client.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low.
usSrxSipPerfUASSnt4xx6xxNotify Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.48

This value identifies the 4xx-6xx for NOTIFY messages sent by the SIP
Server.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxSipPerfByeMsgsRecdByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.26

This value identifies the BYE messages received by the SIP Server.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low
usSrxSipPerfUASRcvSubscribe Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.49

This value identifies the SUBSCRIBE messages received by the SIP Server.

Priority: 6-Engineering Info.

usSrxSipPerfCancelMsgsSentByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.12

This value identifies the CANCEL messages sent by the SIP Client.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high

Table 37 SIP Signaling Manager Measurement Parameters (Seite 4 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 67
snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerfUASSnt200OKSubs Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.50

This value identifies the 200OK for SUBSCRIBE messages sent by the SIP
Server. The action was successfully received, understood, and accepted.

Priority: 6-Engineering Info.

usSrxSipPerf200OKforCancelMsgsRecvdBy Interaction: Read Only
Client Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.13

This value identifies the 200 OK for CANCEL messages received by the SIP
Client. The action was successfully received, understood, and accepted.

Priority: 6-Engineering Info.

usSrxSipPerfUASSnt4xx6xxSubs Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.51

This value identifies the 4xx-6xx for SUBSCRIBE messages sent by the SIP
Server.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerf487MsgsRcvdByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.14

This value identifies the 487 (Request Terminated) messages received by

the SIP Client. This is a client error that indentifies that the request contains
bad syntax or cannot be fulfilled at this server.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high
usSrxSipPerfUASRcvInfo Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.52

This value identifies the INFO messages (DTMF digits) received by the SIP
Server.

Priority: 6-Engineering Info.

usSrxSipPerfAckForCancelMsgsSentByClien Interaction: Read Only
t Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.15

This value identifies the acknowledgement (Ack) for CANCEL messages

sent by the SIP Client. Acknowledgement (handshake) is done.

Priority: 6-Engineering Info.

Table 37 SIP Signaling Manager Measurement Parameters (Seite 5 von 14)

A31003-H8070-T102-1-7618, April, 2012

68 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerfUASSnt200OKInfo Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.53

This value identifies the 200OK for INFO messages Sent by the SIP Server.

Priority: 6-Engineering Info.

usSrxSipPerf200OKforRegisterMsgsSentByS Interaction: Read Only
erver Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.16

This value identifies the 200 OK for REGISTER messages sent by the SIP
Server. The action was successfully received, understood, and accepted.

Priority: 6-Engineering Info.

usSrxSipPerf183MsgRcvByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.54

This value identifies the total 183 messages received.

Priority: 6-Engineering Info.

usSrxSipPerf1xxMsgRcvByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.55

This value identifies the rest of supported 1xx messages received. The
request has been received and continues to process.

Priority: 6-Engineering Info.

usSrxSipPerf2xxMsgRcvByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.56

This value identifies the rest of supported 2xx messages received. The action
was successfully received, understood, and accepted.

Priority: 6-Engineering Info.

usSrxSipPerf3xxMsgRcvByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.57

This value identifies the rest of supported 3xx messages received.

Redirection -- further action needs to be taken in order to complete the
request.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.

Table 37 SIP Signaling Manager Measurement Parameters (Seite 6 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 69
snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerf4xxMsgRcvByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.58

This value identifies the rest of supported 4xx messages received. Client
Error -- the request contains bad syntax or cannot be fulfilled at this server.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerf5xxMsgRcvByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.59

This value identifies the rest of supported 5xx messages received. Server
Error -- the server failed to fulfill an apparently valid request.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerf6xxMsgRcvByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.60

This value identifies the rest of supported 6xx messages received. Global
Failure -- the request cannot be fulfilled at any server.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high.
usSrxSipPerf183MsgSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.61

This value identifies the total 183 messages sent.

Session Progress

Priority: 6-Engineering Info

usSrxSipPerf1xxMsgSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.62

This value identifies the rest of supported 1xx messages sent. The request
has been received and continuing to process.

Priority: 6-Engineering Info

usSrxSipPerf2xxMsgSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.63

This value identifies the rest of supported 2xx messages sent. The action
was successfully received, understood, and accepted.

Priority: 6-Engineering Info

Table 37 SIP Signaling Manager Measurement Parameters (Seite 7 von 14)

A31003-H8070-T102-1-7618, April, 2012

70 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerf3xxMsgSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.64

This value identifies the rest of supported 3xx messages sent. Redirection:
further action needs to be taken in order to complete the request.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerf4xxMsgSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.65

This value identifies the rest of supported 4xx messages sent. Client Error:
the request contains bad syntax or cannot be fulfilled at this server.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerf5xxMsgSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.66

This value identifies the rest of supported 5xx messages sent. Server Error:
the server failed to fulfill an apparently valid request.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerf6xxMsgSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.67

This value identifies the rest of supported 6xx messages sent. Global Failure:
the request cannot be fulfilled at any server.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerfRegisterMsgsReceivedByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.17

This value identifies the REGISTER messages received by the SIP Server.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high and low

Table 37 SIP Signaling Manager Measurement Parameters (Seite 8 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 71
snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerf100TryingMsgsSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.18

This value identifies the 100 TRYING messages sent by the SIP Server. The
request has been received and continues to process.

Priority: 6-Engineering Info.

usSrxSipPerfNoSupportRcvByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.68

This value identifies the number of unsupported messages received.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high.
usSrxSipPerfAckforInviteMsgsRecdByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.22

This value identifies the acknowledgement for INVITE messages received by

the OpenScape Voice system. Handshake is done and a call is going to be
setup.

Priority: 6-Engineering Info

usSrxSipPrackMsgRcvByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.69

This value identifies the PRACK messages received.

Priority: 6-Engineering Info

usSrxSipPerf180RingingMsgsSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.20

This value identifies the 180 RINGING messages sent by the SIP Server.
Provisional: request received, continuing to process the request.

Priority: 6-Engineering Info

usSrxSipUpdateMsgRcvByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.70

This value identifies the UPDATE messages received.

Priority: 6-Engineering Info

Table 37 SIP Signaling Manager Measurement Parameters (Seite 9 von 14)

A31003-H8070-T102-1-7618, April, 2012

72 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerf200OKforInviteMsgsSentByServ Interaction: Read Only
er Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.21

This value identifies the 200 OKs for INVITE messages sent by the SIP
Server. The action was successfully received, understood, and accepted.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low
usSrxSipPrackMsgSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.71

This value identifies the PRACK messages sent.

Priority: 6-Engineering Info

usSrxSipPerfInviteMsgsRecdByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.19

This value identifies the INVITE messages received by the SIP Server.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low
usSrxSipUpdateMsgSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.72

This value identifies the UPDATE messages sent.

Priority: 6-Engineering Info

usSrxSipPerfErrorMsgsSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.23

This value identifies the ERROR messages Sent by the SIP Server. Possible
errors are Client, Server, or Global.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low
usSrxSip200OKForPrackRcvByServ Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.73

This value identifies the 200 OKs received for PRACK messages.
The action was successfully received, understood, and accepted.

Priority: 6-Engineering Info

Table 37 SIP Signaling Manager Measurement Parameters (Seite 10 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 73
snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerfAckForErrorMsgsRecdByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.24

This value identifies the Ack for ERROR messages received by the SIP
Server. Handshake is complete.

Priority: 6-Engineering Info

usSrxSip200OKForUpdateRcvByServ Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.74

This value identifies the 200 OKs received for UPDATE messages. The
action was successfully received, understood, and accepted.

Priority: 6-Engineering Info

usSrxSipPerf200OKforByeMsgsSentByServe Interaction: Read Only
r Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.25

This value identifies the 200 OKs for BYE messages sent by the SIP Server.
The action was successfully received, understood, and accepted.

Priority: 6-Engineering Info

usSrxSip200OKForPrackSentByCli Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.75

This value identifies the 200 OKs sent for PRACK messages. The action was
successfully received, understood, and accepted.

Priority: 6-Engineering Info

usSrxSipPerf200OKForByeMsgsRcvdByClie Interaction: Read Only
nt Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.11

This value identifies the 200 OK for BYE messages received by the SIP
Client.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low
usSrxSip200OKForUpdateSentByCli Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.76

This value identifies the 200 OKs sent for Update messages. The action was
successfully received, understood, and accepted.

Priority: 6-Engineering Info

Table 37 SIP Signaling Manager Measurement Parameters (Seite 11 von 14)

A31003-H8070-T102-1-7618, April, 2012

74 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerf200OKforCancelMsgsSentBySe Interaction: Read Only
rver Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.27

This value identifies the 200 OKs for CANCEL messages sent by the SIP
Server. The action was successfully received, understood, and accepted.

Priority: 6-Engineering Info

usSrxSipAckFor3xxSentByClient Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.77

This value identifies the Acks sent in response to 3xx messages.

Priority: 6-Engineering Info

usSrxSipPerfCancelMsgsRecdByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.28

This value identifies the CANCEL messages Received by the SIP Server.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high
usSrxSipPerfUACSntNotify Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.34

This value identifies the NOTIFY messages sent by the SIP Client. There has
been a service session status change.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxSipPerf487MsgsSentByServer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.29

This value identifies the 487 (Connection Terminated) messages sent by the
SIP Server. Client Error: the request contains bad syntax or cannot be fulfilled
at this server.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high
usSrxSipPerfUACRcv200OKNotify Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.35

This value identifies the 200 OKs for NOTIFY messages received by the SIP
Client. Service Session Status Change
The NOTIFY was successfully received, understood, and accepted.

Priority: 6-Engineering Info

Table 37 SIP Signaling Manager Measurement Parameters (Seite 12 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 75
snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerfAckforCancelMsgsRecdByServ Interaction: Read Only
er Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.30

This value identifies the ACK for CANCEL messages received by the SIP
Server. Handshake is complete and a call is going to be setup.

Priority: 6-Engineering Info

usSrxSipPerfUACRcv4xx6xxNotify Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.36

This value identifies the 4xx-6xx for NOTIFY messages received by the SIP
Client. Service Session Status Change. Possible errors are Client, Server, or
Global.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxSipPerfUACSntRefer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.31

This value identifies the REFER messages sent by the SIP Client.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxSipPerfUACSntSubscribe Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.37

This value identifies the SUBSCRIBE messages sent by the SIP Client.

Priority: 6-Engineering Info

usSrxSipPerfUACRcv202Accepted Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.32

This value identifies the 202 ACCEPTED messages received by the SIP
Client. The REFER was successfully received, understood, and accepted.

Priority: 6-Engineering Info

usSrxSipPerfUACRcv200OKSubs Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.38

This value identifies the 200 OKs for SUBSCRIBE messages received by the
SIP Client. The SUBSCRIBE was successfully received, understood, and
accepted.

Priority: 6-Engineering Info

Table 37 SIP Signaling Manager Measurement Parameters (Seite 13 von 14)

A31003-H8070-T102-1-7618, April, 2012

76 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxSipPerfUACRcv4xx6xxRefer Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.33

This value identifies the 4xx-6xx for REFER messages received by the SIP
Client. Possible errors are Client, Server, or Global.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
Table 37 SIP Signaling Manager Measurement Parameters (Seite 14 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 77
snmp_perform_measure.fm

6.1.2 MGCP Signaling Manager Statistics

Attention: The applicable SNMP MIB is us_srxMgcp.mib.

Table 38 outlines the available SNMP MGCP performance statistics and

measurement parameters. Note that every statistics counter will be shared by all
instances of the MGCP process.

Measurement Name Description Details

usSrxMgcpCreateConnSentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.1

This object refers to the counter of total CREATE CONNECTION messages

sent.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low
usSrxMgcpCreateConnAckReceivedCount Interaction: Read Only
er Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.2

This object refers to the counter of total CREATE CONNECTION

acknowledgements received.

Priority: 6-Engineering Info

Operator Hints: Monitor for abnormal low
usSrxMgcpModifyConnSentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.3

This object refers to the counter of total MODIFY CONNECCTION messages

sent.

Priority: 6-Engineering Info

usSrxMgcpModifyConnAckReceivedCount Interaction: Read Only
er Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.4

This object refers to the counter of total MODIFY CONNECTION

acknowledgements received.

Priority: 6-Engineering Info

Table 38 MGCP Signaling Manager Performance Counters (Seite 1 von 14)

A31003-H8070-T102-1-7618, April, 2012

78 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcpDeleteConnSentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.5

This object refers to the counter of total DELETE CONNECTION messages

sent.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low
usSrxMgcpDeleteConnAckReceivedCount Interaction: Read Only
er Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.6

This object refers to the counter of total DELETE CONNECTION

acknowledgements received.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low
usSrxMgcpDeleteConnReceivedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.7

This object refers to the counter of total DELETE CONNECTION messages

received.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high
usSrxMgcpDeleteConnAckSentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.8

This object refers to the counter of total DELETE CONNECTION

acknowledgements sent.

Priority: 6-Engineering Info

usSrxMgcpRestartInProgressReceivedCo Interaction: Read Only
unter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.9

This object refers to the counter of total ‘Gateway Restart in Progress’

messages received.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high

Table 38 MGCP Signaling Manager Performance Counters (Seite 2 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 79
snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcpRestartInProgressAckSentCou Interaction: Read Only
nter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.10

This object refers to the counter of total ‘Gateway Restart in Progress’

acknowledgements sent.

Priority: 6-Engineering Info

usSrxMgcpNotifyRequestSentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.11

This object refers to the counter of total NOTIFY REQUEST messages sent.

Priority: 6-Engineering Info

usSrxMgcpNotifyRequestAckReceivedCou Interaction: Read Only
nter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.12

This object refers to the counter of total NOTIFY REQUEST acknowledgements

received.

Priority: 6-Engineering Info

usSrxMgcpNotifyReceivedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.13

This object refers to the counter of total NOTIFY messages received.

Priority: 6-Engineering Info

usSrxMgcpNotifyAckSentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.14

This object refers to the counter of total NOTIFY acknowledgements sent.

Priority: 6-Engineering Info

usSrxMgcpAuditEndPointSentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.15

This object refers to the counter of total AUDIT ENDPOINT messages sent.

Priority: 6-Engineering Info

Table 38 MGCP Signaling Manager Performance Counters (Seite 3 von 14)

A31003-H8070-T102-1-7618, April, 2012

80 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcpAuditEndPointAckReceivedCo Interaction: Read Only
unter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.16

This object refers to the counter of total AUDIT ENDPOINT acknowledgements

received.

Priority: 6-Engineering Info

usSrxMgcpAuditConnSentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.17

This object refers to the counter of total AUDIT CONNECTION messages sent.

Priority: 6-Engineering Info

usSrxMgcpAuditConnAckReceivedCounte Interaction: Read Only
r Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.18

This object refers to the counter of total AUDIT CONNECTION

acknowledgements received.

Priority: 6-Engineering Info

usSrxMgcpEndPointConfigSentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.19

This object refers to the counter of total ENDPOINT CONFIG messages sent.

Priority: 6-Engineering Info

usSrxMgcpEndPointConfigAckReceivedC Interaction: Read Only
ounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.20

This object refers to the counter of total ENDPOINT CONFIG

acknowledgements received.

Priority: 6-Engineering Info

usSrxMgcpMTATransientErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.21

This object refers to the counter of MTA Transient Errors with ranges from 400-
499.

Priority: 3-Minor Problem

Operator Hints: Monitor for abnormal high

Table 38 MGCP Signaling Manager Performance Counters (Seite 4 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 81
snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcp500ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.22

This object refers to the counter of MGCP return code 500: The transaction
could not be executed, because the endpoint is unknown.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp501ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.23

This object refers to the counter of MGCP return code 501:The transaction
could not be executed, because the endpoint is not ready. This includes the
case where the endpoint is out-of-service.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high
usSrxMgcp502ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.24

This object refers to the counter of MGCP return code 502: The transaction
could not be executed because the endpoint does not have sufficient resources
(permanent condition).

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high
usSrxMgcp503ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.25

This object refers to the counter of MGCP return code 503: Wildcard too
complicated.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp504ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.26

This object refers to the counter of MGCP return code 504: Unknown or
unsupported command.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
Table 38 MGCP Signaling Manager Performance Counters (Seite 5 von 14)

A31003-H8070-T102-1-7618, April, 2012

82 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcp505ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.27

This object refers to the counter of MGCP return code 505: Unsupported
RemoteConnectionDescriptor.
This should be used when one or more mandatory parameters or values in the
RemoteConnectionDescriptor is not supported.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp506ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.28

This object refers to the counter of MGCP return code 506: Unable to satisfy
both LocalConnectionOptions and RemoteConnectionDescriptor.
This should be used when the LocalConnectionOptions and
RemoteConnectionDescriptor contain one or more mandatory parameters or
values that conflict with each other and/or cannot be supported at the same time
(except for codec negotiation failure - see error code 534).

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp507ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.29

This object refers to the counter of MGCP return code 507:Unsupported

functionality. Some unspecified functionality required to carry out the command
is not supported. There has been a provisioning mismatch.
NOTE: Several other error codes have been defined for specific areas of
unsupported functionality (e.g. 508, 511, etc.), and this error code should only
be used if another more specific error code for the unsupported functionality is
not available.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp508ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.30

This object refers to the counter of MGCP return code 508: Unknown or
unsupported quarantine handling.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
Table 38 MGCP Signaling Manager Performance Counters (Seite 6 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 83
snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcp509ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.31

This object refers to the counter of MGCP return code 509: Error in
RemoteConnectionDescriptor. This should be used when there is a syntax or
semantic error in the RemoteConnectionDescriptor."

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp510ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.32

This object refers to the counter of MGCP return code 510: The transaction
could not be executed, because some unspecified protocol error was detected.
There has been a provisioning mismatch.
Automatic recovery from such an error will be very difficult; therefore, this code
should only be used as a last resort.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp511ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.33

This object refers to the counter of MGCP return code 511:The transaction could
not be executed because the command contained an unrecognized extension.
There has been a provisioning mismatch.
This code should be used for unsupported critical parameter extensions.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp512ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.34

This object refers to the counter of MGCP return code 512: The transaction
could not be executed because the gateway is not equipped to detect one of the
requested events.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high

Table 38 MGCP Signaling Manager Performance Counters (Seite 7 von 14)

A31003-H8070-T102-1-7618, April, 2012

84 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcp513ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.35

This object refers to the counter of MGCP return code 513: The transaction
could not be executed, because the gateway is not equipped to generate one of
the requested signals.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp514ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.36

This object refers to the counter of MGCP return code 514: The transaction
could not be executed because the gateway cannot send the specified
announcement. There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp515ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.37

This object refers to the counter of MGCP return code 515: The transaction
refers to an incorrect connection-id (may have been already deleted).
There has been a state mismatch.

Priority: 3-Minor Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp516ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.38

This object refers to the counter of MGCP return code 516: The transaction
refers to an unknown caller-id, or the caller-id supplied is incorrect.
There has been a state mismatch.

Priority: 3-Minor Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp517ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.39

This object refers to the counter of MGCP return code 517: Unsupported or
invalid mode. There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
Table 38 MGCP Signaling Manager Performance Counters (Seite 8 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 85
snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcp518ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.40

This object refers to the counter of MGCP return code 518: Unsupported or
unknown package.
There has been a provisioning mismatch.
It is recommended to include a PackageList parameter with the list of supported
packages in the response, especially if the response is generated by the Call
Agent.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp519ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.41

This object refers to the counter of MGCP return code 519: Endpoint does not
have a digit map.
There has been a state mismatch.

Priority: 3-Minor Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp520ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.42

This object refers to the counter of MGCP return code 520: The transaction
could not be executed because the endpoint is 'restarting'.
There has been a failure in service.
In most cases this would be a transient error, in which case, error code 405
should be used instead. The error code is only included here for backwards
compatibility.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high
usSrxMgcp521ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.43

This object refers to the counter of MGCP return code 521: Endpoint redirected
to another Call Agent.
The associated redirection behavior is only well-defined when this response is
issued for a RestartInProgress command.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
Table 38 MGCP Signaling Manager Performance Counters (Seite 9 von 14)

A31003-H8070-T102-1-7618, April, 2012

86 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcp522ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.44

This object refers to the counter of MGCP return code 522: No such event or
signal. There has been a provisioning mismatch.
The request referred to an event or signal that is not defined in the relevant
package (which could be the default package).

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp523ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.45

This object refers to the counter of MGCP return code 523: Unknown action or
illegal combination of actions.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp524ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.46

This object refers to the counter of MGCP return code 524: Internal
inconsistency in LocalConnectionOptions.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp525ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.47

This object refers to the counter of MGCP return code 525: Unknown extension
in LocalConnectionOptions.
There has been a provisioning mismatch.
This code should be used for unsupported mandatory vendor extensions.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high

Table 38 MGCP Signaling Manager Performance Counters (Seite 10 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 87
snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcp526ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.48

This object refers to the counter of MGCP return code 526: Insufficient
bandwidth.
There has been a provisioning mismatch.
In cases where this is a transient error, error code 404 should be used instead.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp527ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.49

This object refers to the counter of MGCP return code 527: Missing
RemoteConnectionDescriptor. Remote Descriptor Error, or State MisMatch

Priority: 3-Minor Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp528ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.50

This object refers to the counter of MGCP return code 528: Incompatible
protocol version.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp529ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.51

This object refers to the counter of MGCP return code 529: Internal hardware
failure.
There has been a service failure.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high
usSrxMgcp530ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.52

This object refers to the counter of MGCP return code 530: CAS signaling
protocol error.

Table 38 MGCP Signaling Manager Performance Counters (Seite 11 von 14)

A31003-H8070-T102-1-7618, April, 2012

88 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcp531ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.53

This object refers to the counter of MGCP return code 531: Failure of a grouping
of trunks (e.g., facility failure).
There has been a service failure.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal high
usSrxMgcp532ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.54

This object refers to the counter of MGCP return code 532: Unsupported
value(s) in LocalConnectionOptions.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp533ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.55

This object refers to the counter of MGCP return code 533: Response too large.
Likely to occur only in the case of an audit

Priority: 6-Engineering Info

usSrxMgcp534ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.56

This object refers to the counter of MGCP return code 534: Codec negotiation
failure.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp535ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.57

This object refers to the counter of MGCP return code 535: Packetization period
not supported.
Normally this error should not be generated

Priority: 6-Engineering Info

Table 38 MGCP Signaling Manager Performance Counters (Seite 12 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 89
snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcp536ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.58

This object refers to the counter of MGCP return code 536: Unknown or
unsupported RestartMethod.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp537ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.59

This object refers to the counter of MGCP return code 537: Unknown or
unsupported digit map extension.
There has been a provisioning mismatch.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp538ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.60

This object refers to the counter of MGCP return code 538: Event/signal
parameter error.
Response valid for NotificationRequest

Priority: 6-Engineering Info

usSrxMgcp539ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.61

This object refers to the counter of MGCP return code 539: Invalid or
unsupported command parameter.
There has been a provisioning mismatch.
This code should only be used when the parameter is neither a package nor a
vendor extension parameter.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxMgcp540ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.62

This object refers to the counter of MGCP return code 540: Per endpoint
connection limit exceeded.
State Mismatch

Priority: 3-Minor Problem

Operator Hints: Monitor for abnormal high
Table 38 MGCP Signaling Manager Performance Counters (Seite 13 von 14)

A31003-H8070-T102-1-7618, April, 2012

90 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxMgcp541ErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.3.1.1.63

This object refers to the counter of MGCP return code 541: Invalid or
unsupported LocalConnectionOptions.
There has been a provisioning mismatch.
This code SHOULD only be used when the LocalConnectionOptions is neither
a package nor a vendor extension LocalConnectionOptions.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high

Table 38 MGCP Signaling Manager Performance Counters (Seite 14 von 14)

6.1.3 UCE Statistics

Attention: The applicable SNMP MIB is us_srxUce.mib.

Table 39 outlines the available SNMP UCE performance statistics and

measurement parameters. These statistics include interworked, completed and
aborted calls.

Measurement Name Description Details

usSrxUceIncomingHalfCallsCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.1

This object refers to the total number of incoming half calls.

Priority: 6-Engineering Info

usSrxUceForwardReleaseCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.2

This object refers to the total number of Forward Release calls.

Priority: 6-Engineering Info

usSrxUceOutgoingHalfCallsCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.3

This object refers to the total number of outgoing half calls.

Priority: 6-Engineering Info

Table 39 UCE Performance Measurement Parameters (Seite 1 von 4)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 91
snmp_perform_measure.fm

Measurement Name Description Details

usSrxUceCallsReachAddrCompleteCount Interaction: Read Only
er Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.4

This object refers to the total number of calls reaching address completion.

Priority: 6-Engineering Info

usSrxUceCallsReachAnswerCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.5

This object refers to the total number of calls reaching answering.

Priority: 6-Engineering Info

usSrxUceBackwardReleaseCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.6

This object refers to the total number of backward release calls.

Priority: 6-Engineering Info

usSrxUceTotalReleaseCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.7

This object refers to the total number of total release calls.

Priority: 6-Engineering Info

usSrxUceAbortForUnavailableResourcesC Interaction: Read Only
ounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.8

This object refers to the total number of abort calls caused by unavailable
resources.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxUceAbortForNoRouteAvailableCount Interaction: Read Only
er Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.9

This object refers to the total number of abort calls caused by no route availabe.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxUceAbortForNoTrunkAvailableCount Interaction: Read Only
er Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.10

This object refers to the total number of abort calls caused by no trunk available.

Table 39 UCE Performance Measurement Parameters (Seite 2 von 4)

A31003-H8070-T102-1-7618, April, 2012

92 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxUceAbortForGatewayResourceUnav Interaction: Read Only
ailableCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.11

This object refers to the total number of abort calls caused by gateway
resources unavailable.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxUceAbortForCodecUnavailableCoun Interaction: Read Only
ter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.12

This object refers to the total number of abort calls caused by codec unavailable.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxUceAbortForAuthFailCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.13

This object refers to the total number of abort calls caused by authorization
failure.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxUceAbortForMiscErrorCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.14

This object refers to the total number of abort calls because of other misc error.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal high
usSrxUceTermToTreatmentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.1.15

This object refers to the total number of terminated calls to treatment.

Priority: 6-Engineering Info

usSrxUceSipToMgcpCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.2.1

This object refers to the total number of SIP to MGCP calls.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low

Table 39 UCE Performance Measurement Parameters (Seite 3 von 4)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 93
snmp_perform_measure.fm

Measurement Name Description Details

usSrxUceSipToSipCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.1.1.1.2.2

This object refers to the total number of SIP to SIP calls.

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for abnormal low

Table 39 UCE Performance Measurement Parameters (Seite 4 von 4)

6.1.4 Service Statistics

Service statistics focus on traffic and maintenance measurements. Every
statistics counter is shared by all instances of the Services process.

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

6.1.4.1 Call Forwarding Measurements

Table 40 describes the Call Forwarding measurement parameters.

Measurement Name Description Details

usSrxServiceCFActToAllowedNumberCou Interaction: Read Only
nter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.1

This object refers to the total number of times a subscriber of the feature
attempts to activate call forwarding. An activation attempt is defined as dialing
the activation code plus a complete legitimate telephone number.

Priority: 6-Engineering Info.

usSrxServiceCFActToNonAllowedNumber Interaction: Read Only
Counter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.2

This object refers to the total number of times a subscriber of the feature
attempts to activate call forwarding but dials a non-allowed number.

Priority: 6-Engineering Info.

Table 40 Call Forwarding Performance Traffic Measurement (Seite 1 von 4)

A31003-H8070-T102-1-7618, April, 2012

94 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceCFFirstAttemptSuccessCoun Interaction: Read Only
ter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.3

This object refers to the total number of activation successfully completed by

answer of remote station.

Priority: 6-Engineering Info.

usSrxServiceCFSecondAttemptSuccessC Interaction: Read Only
ounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.4

This object refers to the total number of activation successfully completed by a

second activation procedure.

Priority: 6-Engineering Info.

usSrxServiceCFCFVOccuredCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.5

This object refers to the total number of times call forwarding occurs for the Call
Forwarding Variable Feature.

Priority: 6-Engineering Info.

usSrxServiceCFCFBLOccuredCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.6

This object refers to the total number of times call forwarding occurs for the Call
Forwarding Busy feature.

Priority: 6-Engineering Info.

usSrxServiceCFCFDAOccuredCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.7

This object refers to the total number of times Call Forwarding occurs for the Call
Forwarding No Reply feature.

Priority: 6-Engineering Info.

usSrxServiceSCFServAccCdDialedCounte Interaction: Read Only
r Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.8

This object refers to the total number of times the Call Forwarding Access Code
is dialed.

Priority: 6-Engineering Info.

Table 40 Call Forwarding Performance Traffic Measurement (Seite 2 von 4)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 95
snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceSCFFeatActivatedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.9

This object refers to the total number of times the Call Forwarding Feature is
activated to a remote DN.

Priority: 6-Engineering Info.

usSrxServiceSCFOccurredCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.10

This object refers to the total number of forwardings that occur due to the Call
Forwarding feature.

Priority: 6-Engineering Info.

usSrxServiceSCFFailedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.11

This object refers to the total number of forwarding attempts that fail.

Priority: 6-Engineering Info

usSrxServiceRCFCallsOfferedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.12

This object refers to the total number of times calls are 'offered' to be forwarded
to the RCF remote DN. Before forwarding a call to the RCF remote DN, a check
is made to see if the customer-specified limit of simultaneous calls has been
reached. If this limit has been reached, the calling party shall be given busy tone
from the base switching office.

Priority: 6-Engineering Info

usSrxServiceRCFCallsForwardedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.13

This object refers to the total number of times calls are forwarded to the RCF
remote DN.

Priority: 6-Engineering Info

usSrxServiceRCFCallsOverflowCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.14

This object refers to the total number of times the calling parties are given busy
tone from the base switching office in response to exceeding the customer-
specified limit of simultaneous calls.

Priority: 6-Engineering Info

Table 40 Call Forwarding Performance Traffic Measurement (Seite 3 von 4)

A31003-H8070-T102-1-7618, April, 2012

96 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceSCFScrnEditCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.15

This object refers to the total number of times the Selective Call Forwarding
Screen Editing Service is accessed.

Priority: 6-Engineering Info

usSrxServiceSCFCallsFwdedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.16

This object refers to the total number of forwardings that occur due to the
Selective Call Forwarding feature.

Priority: 6-Engineering Info

usSrxServiceSCFActvRemoteDNCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.17

This object refers to the total number of times the Selective Call Forwarding
feature activates the Remote DN.

Priority: 6-Engineering Info

usSrxServiceSCFResUnavilCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.18

This object refers to the total number of times a customer could not activate SCF
due to unavailable resources on the OpenScape Voice system.

Priority: 6-Engineering Info

usSrxServiceCFVoiceMailCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.1.19

This object refers to the total number of times a customer's call is forwarded to
Voice Mail.

Priority: 6-Engineering Info

Table 40 Call Forwarding Performance Traffic Measurement (Seite 4 von 4)

6.1.4.2 Calling Identity Delivery Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 97
snmp_perform_measure.fm

Table 41 describes the Callling Identity Delivery measurement parameters.

Measurement Name Description Details

usSrxServiceCIDDNToCalledCPECounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.1

This object refers to the total number of times a calling party's directory number
is delivered to a subscriber with the Calling Number Delivery Service.

Priority: 6-Engineering Info

usSrxServiceCIDAnonymousDNToCalledC Interaction: Read Only
PECounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.2

This object refers to the total number of times a Private Number indication is
delivered to a subscriber with the Calling Number Delivery Service.

Priority: 6-Engineering Info

usSrxServiceCIDUnavailDNToCalledCPE Interaction: Read Only
Counter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.3

This object refers to the total number of times an out of area/unavailable

indication is delivered to a subscriber with the Calling Number Delivery Service.

Priority: 6-Engineering Info

usSrxServiceCIDCNDActivateBySubscribe Interaction: Read Only
rCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.4

This object refers to the total number of times the Calling Number Delivery
(CND) feature is activated by a subscriber with the Usage Sensitive version of
the feature.

Priority: 6-Engineering Info

usSrxServiceCIDCNDDeactivateBySubscr Interaction: Read Only
iberCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.5

This object refers to the total number of times the Calling Number Delivery
feature is deactivated by a subscriber with the Usage Sensitive version of the
feature.

Priority: 6-Engineering Info

Table 41 Calling Identity Delivery Traffic Measurements (Seite 1 von 3)

A31003-H8070-T102-1-7618, April, 2012

98 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceCIDCallingNameToCalledCP Interaction: Read Only
ECounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.6

This object refers to the total number of times a calling party's name is delivered
to a subscriber with the Calling Name Delivery Service.

Priority: 6-Engineering Info

usSrxServiceCIDAnonymousNameToCalle Interaction: Read Only
dCPECounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.7

This object refers to the total number of times an Anonymous Name indication
is delivered to a subscriber with the Calling Name Delivery Service.

Priority: 6-Engineering Info

usSrxServiceCIDUnavailNameToCalledCP Interaction: Read Only
ECounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.8

This object refers to the total number of times an out of area/unavailable name
indication is delivered to a subscriber with the Calling Name Delivery Service.

Priority: 6-Engineering Info

usSrxServiceCIDTCAPNameQueryCounte Interaction: Read Only
r Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.9

This object refers to the total number of times a TCAP Name Query is sent to
the SCP.

Priority: 6-Engineering Info

usSrxServiceCIDTCAPNameQueryTimeou Interaction: Read Only
tCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.10

This object refers to the total number of timeouts that occured while the SRX
was waiting for the response from the SCP for a Calling Name Query.

Priority: 6-Engineering Info

usSrxServiceCIDCNDBlockingActivateCou Interaction: Read Only
nter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.11

This object refers to the total number of times the Calling Number Delivery
Blocking feature was activated due to subscriber dialing the Service Access
Code for the feature.

Priority: 6-Engineering Info

Table 41 Calling Identity Delivery Traffic Measurements (Seite 2 von 3)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 99
snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceCIDCNDBlockingActMadeDN Interaction: Read Only
PublicCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.12

This object refers to the total number of times the Calling Number Delivery
Blocking feature Activation made the DN public.

Priority: 6-Engineering Info

usSrxServiceCIDCNDBlockingActMadeDN Interaction: Read Only
PrivateCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.13

This object refers to the total number of times the Calling Number Delivery
Blocking feature Activation made the DN private.

Priority: 6-Engineering Info

usSrxServiceCIDCallingNameDeliveryBloc Interaction: Read Only
kingActCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.14

This object refers to the total number of times the Calling Name Delivery
Blocking feature was activated due to subscriber dialing the Service Access
Code for the feature.

Priority: 6-Engineering Info

usSrxServiceCIDCIDSDeliveryActCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.15

This object refers to the total number of times the Calling Identity Delivery and
Suppression's (CIDS) Delivery Feature was activated due to subscriber dialing
the Service Access Code for the feature.

Priority: 6-Engineering Info

usSrxServiceCIDCIDSSuppressionActCou Interaction: Read Only
nter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.2.16

This object refers to the total number of times the Calling Identity Delivery and
Suppression's (CIDS) Suppression Feature was activated due to subscriber
dialing the Service Access Code for the feature.

Priority: 6-Engineering Info

Table 41 Calling Identity Delivery Traffic Measurements (Seite 3 von 3)

A31003-H8070-T102-1-7618, April, 2012

100 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

6.1.4.3 Anonymous Call Rejection Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 42 describes the Anonymous Call Rejection measurement parameters.

Measurement Name Description Details

usSrxServiceACRActBySubscriberCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.1

This object refers to the total number of times the ACR feature was activated
due to subscriber dialing the Service Access Code for the feature.

Priority: 6-Engineering Info

usSrxServiceACRDeactBySubscriberCoun Interaction: Read Only
ter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.2

This object refers to the total number of times the ACR feature was deactivated
due to subscriber dialing the Service Access Code for the feature.

Priority: 6-Engineering Info

usSrxServiceACRNotActDueToResourceU Interaction: Read Only
navailCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.3

This object refers to the total number of times a customer could not activate
ACR due to unavailable resources on the SRX.

Priority: 6-Engineering Info

usSrxServiceACRNotDeactDueToResourc Interaction: Read Only
eUnavailCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.4

This object refers to the total number of times a customer could not deactivate
ACR due to unavailable resources on the SRX.

Priority: 6-Engineering Info

usSrxServiceACRCallToDenialAnnounceC Interaction: Read Only
ounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.5

This object refers to the total number of times a call was routed to the ACR
Denial Announcement.

Priority: 6-Engineering Info

Table 42 Anonymous Call Rejection Traffic Measurements (Seite 1 von 3)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 101
snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceACRDenialAnnounceUnavail Interaction: Read Only
Counter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.6

This object refers to the total number of times the ACR Denial Announcement
facility is unavailable.

Priority: 6-Engineering Info

usSrxServiceACRActConfirmAnnounceUn Interaction: Read Only
availCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.7

This object refers to the total number of times the ACR Activation Confirmation
Announcement facility is unavailable.

Priority: 6-Engineering Info

usSrxServiceACRDeactConfirmAnnounce Interaction: Read Only
UnavailCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.8

This object refers to the total number of times the ACR Deactivation
Confirmation Announcement facility is unavailable.

Priority: 6-Engineering Info

usSrxServiceEACRNotActDueToResUnav Interaction: Read Only
ailCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.9

This object refers to the total number of times Enhanced Anonymous Call
Rejection (EACR) is not activated due to unavailability of resources.

Priority: 6-Engineering Info

usSrxServiceEACRNotDeactDueToResUn Interaction: Read Only
availCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.10

This object refers to the total number of times Enhanced Anonymous Call
Rejection (EACR) is not deactivated because of unavailability of resources.

Priority: 6-Engineering Info

usSrxServiceEACRActConfirmAnnounceU Interaction: Read Only
navailCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.11

This object refers to the total number of times the EACR Activation Confirmation
Announcement facility is unavailable.

Priority: 6-Engineering Info

Table 42 Anonymous Call Rejection Traffic Measurements (Seite 2 von 3)

A31003-H8070-T102-1-7618, April, 2012

102 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceEACRDeactConfirmAnnounc Interaction: Read Only
eUnavailCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.12

This object refers to the total number of times the EACR Deactivation
Confirmation Announcement facility is unavailable.

Priority: 6-Engineering Info

usSrxServiceEACRActBySubscriberCount Interaction: Read Only
er Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.13

This object refers to the total number of times the EACR feature was activated
due to subscriber dialing the Service Access Code for the feature.

Priority: 6-Engineering Info

usSrxServiceEACRDeactBySubscriberCo Interaction: Read Only
unter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.3.14

This object refers to the total number of times the EACR feature was deactivated
due to subscriber dialing the Service Access Code for the feature.

Priority: 6-Engineering Info

Table 42 Anonymous Call Rejection Traffic Measurements (Seite 3 von 3)

6.1.4.4 Speed Calling Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 43 describes the Speed Calling measurement parameters.

Measurement Name Description Details

usSrxServiceSCOneDigitCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.4.1

This object refers to the total number of times that customers place calls to a
repertory of frequently called numbers by dialing a 1-digit speed calling code.
Eight numbers(2 through 9) can be placed in the list for non-business group
users and six numbers (2 through 7) for Business Group customers.

Priority: 6-Engineering Info

Table 43 Speed Calling Traffic Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 103
snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceSCTwoDigitCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.4.2

This object refers to the total number of times that customers place calls to a
repertory of 30 frequently called numbers by dialing the 2-digit speed calling
code (20 through 49).

Priority: 6-Engineering Info

usSrxServiceSCCCSCSuccessCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.4.3

This object refers to the total number of times that Customer-Changeable Speed
Calling (CCSC) customers successfully dial a change speed calling list access
code and a new telephone number to assign their own speed calling codes
directly and immediately from their own telephone. The CCSC feature is
available for 1-digit and/or 2-digit speed calling list owners.

Priority: 6-Engineering Info

Table 43 Speed Calling Traffic Measurements (Seite 2 von 2)

A31003-H8070-T102-1-7618, April, 2012

104 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

6.1.4.5 Screen List Editing Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 44 describes the Speed Calling measurement parameters.

Measurement Name Description Details

usSrxServiceInvokingSLEAttemptsCounte Interaction: Read Only
r Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.5.1

This object specifies the peg counts of attempts to invoke Screen List Editing as
a result of dialing the access code. The Service is responsible in incrementing
this count.

Priority: 6-Engineering Info

usSrxServiceInvokingSLESuccessfulCoun Interaction: Read Only
ter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.5.2

This object provides usage counts of successful innvocations of Screen List

Editing as a result of dialing the access code. The Service is responsible in
incrementing this count.

Priority: 6-Engineering Info

usSrxServiceDeniedSLECounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.5.3

This object provides overflow counts of the number of customers denied access
to Screen List Editing as a result of unavailable resources. The Service is
responsible in incrementing this count.

Priority: 6-Engineering Info

Table 44 Screen List Editing Traffic Measurements

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 105
snmp_perform_measure.fm

6.1.4.6 Selective Call Acceptance Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 45 describes the Selective Call Acceptance measurement parameters.

Measurement Name Description Details

usSrxServiceSCAAccessCodeAttemptedC Interaction: Read Only
ounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.6.4

This object refers to the total number of hourly peg counts and usage counts
with a usage-scan rate of 1 per 10 seconds for SCA screening list editing and
for attempts to invoke control procedures as a result of dialing an SCA service
access code. These counts should be available per hour on an individual SPCS
basis.

Priority: 6-Engineering Info

usSrxServiceSCAUnacceptedCallsCounte Interaction: Read Only
r Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.6.5

This object refers to the total number of hourly peg counts of unaccepted calls.
These counts should be available per hour on an individual SPCS basis.

Priority: 6-Engineering Info

usSrxServiceSCAValidationCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.6.6

This object refers to the total number of hourly peg counts of all calls checked
against the screening list of a customer with SCA active. These counts should
be available per hour on an individual SPCS basis.

Priority: 6-Engineering Info

usSrxServiceSCAPinValidatedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.6.7

This object refers to the total number of calls on which a caller successfully
entered a PIN. These counts should be available hourly on a per-SPCS and a
per-line basis.

Priority: 6-Engineering Info

Table 45 Selective Call Acceptance Traffic Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

106 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceSCAPinFailedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.6.8

This object refers to the total number of calls on which a caller unsuccessfully
attempted PIN entry. These counts should be available hourly on a per-SPCS
and a per-line basis.

Priority: 6-Engineering Info

usSrxServiceSCACusDeniedResUnavailC Interaction: Read Only
ounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.6.9

This object refers to the total number of overflow counts for the number of
customers denied access to SCA because of unavailable Stored Program
Control Switch (SPCS) resources. These counts should be available on an
individual SPCS basis.

Priority: 6-Engineering Info

usSrxServiceSCATrtDeniedResUnavailCo Interaction: Read Only
unter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.6.10

This object refers to the total number of overflow counts for the number of
unaccepted calls. These counts should be available on an individual SPCS
basis.

Priority: 6-Engineering Info

usSrxServiceSCAAttpDeniedResUnavailC Interaction: Read Only
ounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.6.11

This object refers to the total number of overflow counts for the SPCS and/or
any circuits used to provide SCA control procedures. These counts should be
available on an individual SPCS basis.

Priority: 6-Engineering Info

Table 45 Selective Call Acceptance Traffic Measurements (Seite 2 von 2)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 107
snmp_perform_measure.fm

6.1.4.7 Selective Call Rejection Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 46 describes the Selective Call Rejection measurement parameters.

Measurement Name Description Details

usSrxServiceSCRAttemptCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.7.1

This object refers to the hourly peg counts and usage counts with a usage scan
rate of 1 per 10 seconds for Selective Call Rejection (SCR) screen editing and
for attempts to invoke control procedures as a result of dialing the SCR service
success code.

Priority: 6-Engineering Info

usSrxServiceSCRCallToDenialAnncCount Interaction: Read Only
er Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.7.2

This object refers to the hourly peg counts of rejected calls.

Priority: 6-Engineering Info

usSrxServiceSCRAllCallsScreenedCounte Interaction: Read Only
r Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.7.3

This object refers to the hourly peg counts of all calls screened for a customer
with Selective Call Rejection (SCR) active.

Priority: 6-Engineering Info

usSrxServiceSCRCusDeniedResUnaCoun Interaction: Read Only
ter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.7.4

This object refers to the overflow counts for the number of customers denied
access to Selective Call Rejection (SCR) because of unavailable system
resources.

Priority: 6-Engineering Info

Table 46 Selective Call Rejection Traffic Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

108 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceSCRDeniedAnncUnaCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.7.5

This object refers to the overflow counts for the number of rejected calls
because of denied access to Selective Call Rejection (SCR).

Priority: 6-Engineering Info

usSrxServiceSCRAccDeniedResUnaCoun Interaction: Read Only
ter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.7.6

This object refers to the overflow counts for the system and/or any circuits used
to provide Selective Call Rejection (SCR) control procedures.

Priority: 6-Engineering Info

Table 46 Selective Call Rejection Traffic Measurements (Seite 2 von 2)

6.1.4.8 Malicious Call Trace Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 47 describes the Malicious Call Trace measurement parameters.

Measurement Name Description Details

usSrxServiceMCTStatAccessesCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.1

This object refers to the number of times the subscriber accesses the service by
dialing the service access code.

Priority: 6-Engineering Info

usSrxServiceMCTStatActivCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.2

This object refers to the number of times a call trace is attempted after a
subscriber accesses the service.

Priority: 6-Engineering Info

Table 47 Malicious Call Trace Traffic Measurements (Seite 1 von 3)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 109
snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceMCTStatRecsSentCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.3

This object refers to the number of call trace records successfully written to file.

Priority: 6-Engineering Info

usSrxServiceMCTStatConfirmsCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.4

This object refers to the number of successful activations completed.

Priority: 6-Engineering Info

usSrxServiceMCTStatOpFailCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.5

This object refers to the number of times that the service cannot be successfully
completed after subscriber access.

Priority: 6-Engineering Info

usSrxServiceMCTStatInvalDnCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.6

This object refers to the number of times the subscriber accesses the service,
but the service cannot proceed due to an invalid or missing calling DN in the
subscriber's incoming memory slot (ie, the calling party number of the last
received call is invalid or unavailable).

Priority: 6-Engineering Info

usSrxServiceMCTStatNoAuth Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.7

This object refers to the number of times the subscribers attempt to use
Malicious Call Trace, but are denied access.

Priority: 6-Engineering Info

usSrxServiceMCTStatAbort Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.8

This object refers to the number of times that the subscriber dialed the MCT
access code, but did not proceed with the activation.

Priority: 6-Engineering Info

Table 47 Malicious Call Trace Traffic Measurements (Seite 2 von 3)

A31003-H8070-T102-1-7618, April, 2012

110 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceMCTStatAfterCallCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.9

This object refers to the number of call trace records successfully written to file
when malicious call trace method 'after a call' is activated. This counter applies
to both ANSI and ITU.

Priority: 6-Engineering Info

usSrxServiceMCTStatDuringCallCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.10

This object refers to the number of call trace records successfully written to file
when malicious call trace method 'during a call' is activated. This counter
applies to both ANSI and ITU.

Priority: 6-Engineering Info

usSrxServiceMCTStatOnNoReplyCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.11

This object refers to the number of call trace records successfully written to file
when malicious call trace method 'Not-Answered calls' is activated. This counter
applies to both ANSI and ITU.

Priority: 6-Engineering Info

usSrxServiceMCTStatOnAnswerCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.12

This object refers to the number of call trace records successfully written to file
when malicious call trace method 'Upon an answer' is activated. This counter
applies to both ANSI and ITU.

Priority: 6-Engineering Info

usSrxServiceMCTStatOnAlertingCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.8.13

This object refers to the number of call trace records successfully written to file
when malicious call trace method 'Upon alerting' is activated. This counter
applies to both ANSI and ITU.

Priority: 6-Engineering Info

Table 47 Malicious Call Trace Traffic Measurements (Seite 3 von 3)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 111
snmp_perform_measure.fm

6.1.4.9 Three Way Calling Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 48 describes the Three Way Calling measurement parameters.

Measurement Name Description Details

usSrxServiceTWCAttemptedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.9.1

This object refers to the number of times TWC service customers attempt to add
on a thid party. The count indicates the customer involved in a stable talking
connection has flashed and dialed a complete set of digits that are valid for
calling.

Priority: 6-Engineering Info

usSrxServiceTWCFormedCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.9.2

This object refers to the number of times successful Three Way Calling is
formed by a customer with TWC service.

Priority: 6-Engineering Info

Table 48 Three Way Calling Traffic Measurements

6.1.4.10 Intercom Call Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 49 describes the Intercom Calling measurement parameters.

Measurement Name Description Details

usSrxServiceICDIncommingAttemptedCou Interaction: Read Only
nter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.10.1

This object refers to the number of times ICD service customers attempt to
connect an incomming intercom call.

Priority: 6-Engineering Info

Table 49 Intercom Calling Traffic Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

112 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceICDIncommingCompletedCo Interaction: Read Only
unter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.10.2

This object refers to the number of successful times an incomming Intercom Call
is formed by a customer with ICD service.

Priority: 6-Engineering Info

usSrxServiceICDOutgoingAttemptedCount Interaction: Read Only
er Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.10.3

This object refers to the number of times ICD service customers attempt to
connect an outgoing intercom call.

Priority: 6-Engineering Info

usSrxServiceICDOutgoingCompletedCoun Interaction: Read Only
ter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.10.4

This object refers to the number of successful times an outgoing Intercom Call
is formed by a customer with ICD service.

Priority: 6-Engineering Info

Table 49 Intercom Calling Traffic Measurements (Seite 2 von 2)

6.1.4.11 Voice Mail Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 50 describes the Voice Mail measurement parameters.

Measurement Name Description Details

usSrxServiceVMMWIOperCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.1

This object refers to the number of times Voice Mail service customers trigger
Message Waiting Indication.

Priority: 6-Engineering Info

Table 50 Voice Mail Traffic Measurements (Seite 1 von 6)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 113
snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceVMMWIRemCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.2

This object refers to the number of times Voice Mail service customers trigger
the removal of Message Waiting Indication.

Priority: 6-Engineering Info

usSrxServiceVMMWIQuerySentSuccessC Interaction: Read Only
ounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.3

This object refers to the number of times TCAP Message Waiting Indicator
queries are successfully sent.

Priority: 6-Engineering Info

usSrxServiceVMMWIQuerySentUnsucces Interaction: Read Only
sCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.4

This object refers to the number of times TCAP Message Waiting Indicator
queries are unsuccessfully sent. .

Priority: 6-Engineering Info

usSrxServiceVMMWIQueryReceivedSucc Interaction: Read Only
essCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.5

This object refers to the number of times TCAP Message Waiting Indicator
queries are successfully received.

Priority: 6-Engineering Info

usSrxServiceVMMWIQueryReceivedUnsu Interaction: Read Only
ccessCounter Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.6

This object refers to the number of times TCAP Message Waiting Indicator
queries are unsuccessfully received.

Priority: 6-Engineering Info

usSrxServiceVMMWIQueryFailureCounter Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.7

This object refers to the number of times TCAP Message Waiting Indicator
queries fail.

Priority: 6-Engineering Info

Table 50 Voice Mail Traffic Measurements (Seite 2 von 6)

A31003-H8070-T102-1-7618, April, 2012

114 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceVMMWIInvRecNumOper Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.8

This object refers to the number of times the E164 number provided to identify
the receiving user is not a valid number (Operate).

Priority: 6-Engineering Info

usSrxServiceVMMWIInvRecNumRem Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.9

This object refers to the number of times the E164 number provided to identify
the receiving user is not a valid number (Remove).

Priority: 6-Engineering Info

usSrxServiceVMMWIResUnavOper Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.10

This object refers to the number of times the resources required to perform
adequately the MWI supplementary service are not available (Operate).

Priority: 6-Engineering Info

usSrxServiceVMMWIResUnavRem Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.11

This object refers to the number of times the resources required to perform
adequately the MWI supplementary service are not available (Remove).

Priority: 6-Engineering Info

usSrxServiceVMMWIInvUsrNumOper Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.12

This object refers to the number of times the received E164 number identifying
the controlling user is a non authorized number (in case of registration
subscription option applies) or an invalid number (Operate).

Priority: 6-Engineering Info

usSrxServiceVMMWIInvUsrNumberRem Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.13

This object refers to the number of times the received E164 number identifying
the controlling user is a non authorized number (in case of registration
subscription option applies) or an invalid number (Remove).

Priority: 6-Engineering Info

Table 50 Voice Mail Traffic Measurements (Seite 3 von 6)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 115
snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceVMMWIRecUsrNotSubOper Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.14

This object refers to the number of times the MWI supplementary service has
not been subscribed to by the receiving user (Operate).

Priority: 6-Engineering Info

usSrxServiceVMMWIRecUsrNotSubRem Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.15

This object refers to the number of times the MWI supplementary service has
not been subscribed to by the receiving user (Remove).

Priority: 6-Engineering Info

usSrxServiceVMMWIIndNotDelOper Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.16

This object refers to the number of times indication is not delivered by the
access signaling system (Operate).

Priority: 6-Engineering Info

usSrxServiceVMMWIIndNotDelRem Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.17

This object refers to the number of times indication is not delivered by the
access signaling system (Remove).

Priority: 6-Engineering Info

usSrxServiceVMMWIMaxNumUsrRch Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.18

This object refers to the number of times the receiving user's network cannot
handle any further controlling users.

Priority: 6-Engineering Info

usSrxServiceVMMWIMaxNumInstRch Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.19

This error value is used when the maximum number of activations for the
receiving user has been reached and a further activation has been requested.

Priority: 6-Engineering Info

Table 50 Voice Mail Traffic Measurements (Seite 4 von 6)

A31003-H8070-T102-1-7618, April, 2012

116 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceVMMWISSIIntOper Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.20

This object refers to the number of times an error response indicating

‘supplementary services interaction' is received by the far end system, in
responce to a MWI Set operation, sent by the OpenScape Voice system.

Priority: 6-Engineering Info

usSrxServiceVMMWISSIIntRem Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.21

This object refers to the number of times an error response indicating

'supplementary services interaction' is received by the far end system, in
response to a MWI Reset operation, sent by the OpenScape Voice system.

Priority: 6-Engineering Info

usSrxServiceVMMWIRecUsrNoSubOperS Interaction: Read Only
nd Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.22

This object refers to the number of times an error response indicating that the
Receiving user is not subscribed, is sent by the system in response to a
received MWI Set operation.

Priority: 6-Engineering Info

usSrxServiceVMMWIRecUsrNoSubRemS Interaction: Read Only
nd Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.23

This object refers to the number of times an error responce indicating that the
Receiving user is not subscribed, is sent by the system in response to a
received MWI Reset operation.

Priority: 6-Engineering Info

usSrxServiceVMMWIIndNoDelOpeSnd Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.24

This object refers to the number of times an error response indicating that
Indication is Not Delivered, is sent by the system in response to a received MWI
Set operation.

Priority: 6-Engineering Info

Table 50 Voice Mail Traffic Measurements (Seite 5 von 6)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 117
snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceVMMWIIndNoDelRemSnd Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.11.25

This object refers to the number of times an error response indicating that
Indication is Not Delivered, is sent by the system in response to a received MWI
Reset operation.

Priority: 6-Engineering Info

Table 50 Voice Mail Traffic Measurements (Seite 6 von 6)

6.1.4.12 Do Not Disturb Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 52 describes the Do Not Disturb measurement parameters.

Measurement Name Description Details

usSrxServiceDNDSucActivCntr Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.12.1

This object refers to the total number of successful activations of the Do Not
Disturb service.

Priority: 6-Engineering Info

usSrxServiceDNDUnSucActivCntr Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.12.2

This object refers to the total number of unsuccessful activations of the Do Not
Disturb service.

Priority: 6-Engineering Info

usSrxServiceDNDSucDeActivCntr Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.12.3

This object refers to the total number of successful deactivations of the Do Not
Disturb service.

Priority: 6-Engineering Info

Table 51 Do Not Disturb Traffic Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

118 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

usSrxServiceDNDUnSucDeActivCntr Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.12.4

This object refers to the total number of unsuccessful deactivations of the Do

Not Disturb service.

Priority: 6-Engineering Info

Table 51 Do Not Disturb Traffic Measurements (Seite 2 von 2)

6.1.4.13 CSTA Monitor Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 52 describes the CSTA Monitor measurement parameters.

Measurement Name Description Details

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.13.1
usSrxServiceCSTAMonitoredAll
This object refers to the total number active CSTA monitor – All CSTA
applications.

Priority: 6-Engineering Info

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.13.2
usSrxServiceCSTAMonitoredSiemens
This object refers to the total number active CSTA monitors for
application type = OpenScape.

Priority: 6-Engineering Info

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.13.3
usSrxServiceCSTAMonitoredOther
This object refers to the total number active CSTA monitors for
application type = 3rd Party

Priority: 6-Engineering Info

Table 52 CSTA Monitor Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 119
snmp_perform_measure.fm

Measurement Name Description Details

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.13.4
usSrxServiceCSTAMonitoredTelefonic
a This object refers to the total number active CSTA monitors for
application type = Telefonica.

Priority: 6-Engineering Info

Table 52 CSTA Monitor Measurements (Seite 2 von 2)

6.1.4.14 CSTA Routing Measurements

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 52 describes the CSTA Routing measurement parameters. This provides

the number of devices that currently have an active CSTA Route
Registration.

Measurement Name Description Details

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.14.1
us_srxServiceCSTARoutingAll This object refers to the total number active CSTA Route Registration –
All CSTA applications.

Priority: 6-Engineering Info

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.14.2
us_srxServiceCSTARoutingSiemens
This object refers to the total number active CSTA monitors for
application type = OpenScape.

Priority: 6-Engineering Info

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.14.3

us_srxServiceCSTARoutingOther This object refers to the total number active CSTA monitors for
application type = 3rd Party

Priority: 6-Engineering Info

Table 53 CSTA Routing Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

120 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.14.4
us_srxServiceCSTARoutingTelefonica This object refers to the total number active CSTA monitors for
application type = Telefonica

Priority: 6-Engineering Info

Table 53 CSTA Routing Measurements (Seite 2 von 2)

6.1.4.15 CSTA Monitor List

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 52 describes the CSTA Monitor List elements. These entriesprovide a list
of devices that currently have an active CSTA Monitor.

Measurement Name Description Details

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.15.1

usSrxServiceCSTAMonitoredAll This object refers to the list of active CSTA monitored devices – All
applications.

Priority: 6-Engineering Info

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.15.2
usSrxServiceCSTAMonitoredSiemens This object refers to the list of active CSTA monitored devices for
application type = OpenScape.

Priority: 6-Engineering Info

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.15.3

usSrxServiceCSTAMonitoredOther This object refers to the list of active CSTA monitored devices for
application type = 3rd Party.

Priority: 6-Engineering Info

Table 54 CSTA Monitor Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 121
snmp_perform_measure.fm

Measurement Name Description Details

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.15.4
usSrxServiceCSTAMonitoredTelefonic
a This object refers to the list of active CSTA monitor devices for
application type = Telefonica.
NOTE: Device ID is EID+Ext

Priority: 6-Engineering Info

Table 54 CSTA Monitor Measurements (Seite 2 von 2)

6.1.4.16 CSTA Routing List

Attention: The applicable SNMP MIB for all Service Statistics is

us_srxService.mib.

Table 52 describes the CSTA Routing measurement parameters. These entries

will provide a list of devices that currently have a active CSTA Route
Registrations.

Measurement Name Description Details

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.16.1

us_srxServiceCSTARoutingAll This object refers to the list of devices with an active CSTA Route
Registration – All applications.

Priority: 6-Engineering Info

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.16.2
us_srxServiceCSTARoutingSiemens
This object refers to the list of devices with an active CSTA Route
Registration for application type = OpenScape.

Priority: 6-Engineering Info

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.16.3
us_srxServiceCSTARoutingOther This object refers to the list of devices with an active CSTA Route
Registration for application type = 3rd Party.

Priority: 6-Engineering Info

Table 55 CSTA Routing Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

122 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.4.1.1.16.4

us_srxServiceCSTARoutingTelefonica This object refers to the list of devices with an active CSTA Route
Registration for application type = Telefonica.
NOTE: Device ID is EID+Ext.

Priority: 6-Engineering Info

Table 55 CSTA Routing Measurements (Seite 2 von 2)

6.1.5 License Usage / Measurements

Attention: The applicable SNMP MIB for License Usage counters

hiqFeatLic.mib.

Table 56 describes the License performance statistics and measurement

parameters. This includes the Trunk Average usage, Dynamic usage, and OSMO
licenses.

Measurement Name Description Details

hiqFeatLicTrunkAverageUsage Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.5.1.2

The average usage within one hour. License Manager will take snapshots of
current usage counter every 5 minutes and get the average of the values during
an hour.

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for abnormal low.
hiqFeatLicTrunkMaxAverageUsage Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.5.1.3

The maximum average usage within one hour, during a 24 hour period.

Priority: 6-Engineering Info

hiqFeatLicDynamicInUse Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.5.2.2

This object represents the number of Dynamic licenses currently in use in the
system. There is One Home DN per Dynamic license. This value must be less
or equal to the number of Dynamic licenses Purchased.
Table 56 License Usage Traffic Measurements (Seite 1 von 3)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 123
snmp_perform_measure.fm

Measurement Name Description Details

hiqFeatLicDynamicMaxInUse Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.5.2.3

This number represents the maximum usage of Dynamic licenses over the last
24 hour period.

Priority: 6-Engineering Info

hiqFeatLicDynamicViolations Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.5.2.4

This object is a counter holding the number of usage violations. License

Manager detects Dynamic licensing violations based on the maximum usage.
Therefore, system counts one violation per day maximum, regardless of how
many times the actual usage exceeded the licensing limits during that day. If this
number exceeds the violation limit, the system activates the license
enforcement. The default violation limit is 10 and this number cannot be
modified by the system Administrator.

Priority: 6-Engineering Info

hiqFeatLicDynamicViolationsLimit Interaction: Read Only
Syntax: Counter32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.5.2.5

This is the number of usage violations the system allows,before activating the
enforcement.

Priority: 6-Engineering Info

hiqFeatLicOSMOLicensesAssigned Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.5.3.1

Number of OSMO licenses assigned to the system

Priority: 6-Engineering Info

hiqFeatLicOSMOLicensesInUse Interaction: Read Only

Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.5.3.2

Number of OSMO licenses currently in use.

Priority: 6-Engineering Info

Table 56 License Usage Traffic Measurements (Seite 2 von 3)

A31003-H8070-T102-1-7618, April, 2012

124 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

hiqFeatLicOSMOMaxInUsedOver24Hour Interaction: Read Only
Syntax: Integer32
OID - 1.3.6.1.4.1.4329.2.18.2.2.1.5.3.3

Maximum Number of OSMO licenses used over the last 24 hour period

Priority: 6-Engineering Info

Table 56 License Usage Traffic Measurements (Seite 3 von 3)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 125
snmp_perform_measure.fm

6.2 SNMPv2 MIBs

6.2.1 IF-MIB II
Table 57 describes the IF-MIB II performance statistics and measurement
parameters.

Measurement Name Description Details

ifOperStatus This measurement identifies the current operational state of the interface.

Operator Hints: Use TRAP instead.

ifInOctets The total number of octets received on the interface, including framing
characters.
OID - 1.3.6.1.2.1.2.2.1.10

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ifInUcastPkts The number of subnetwork-unicast packets delivered to a higher-layer protocol.
OID - 1.3.6.1.2.1.2.2.1.11

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ifInDiscards The number of inbound packets which were discarded even though no errors
had been detected. (E.g. buffer overflow).

OID - 1.3.6.1.2.1.2.2.1.13

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ifInErrors The number of inbound packets that contained errors preventing them from
being deliverable to a higher-layer protocol.

OID - 1.3.6.1.2.1.2.2.1.14

Priority: 12-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ifInUnknownProtos The number of packets received via the interface which were discarded
because of an unknown or unsupported protocol.

OID - 1.3.6.1.2.1.2.2.1.15

Priority: 12-Major Configuration Problem

Operator Hints: Monitor for Abnormal High

Table 57 IF-MIB II Measurements (Seite 1 von 4)

A31003-H8070-T102-1-7618, April, 2012

126 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

ifOutOctets The total number of octets transmitted out of the interface, including framing
characters.

OID - 1.3.6.1.2.1.2.2.1.16

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ifOutUcastPkts The total number of packets that higher-level protocols requested be
transmitted to a subnetwork-unicast address, including those that were
discarded or not sent.

OID - 1.3.6.1.2.1.2.2.1.17

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ifOutDiscards The number of outbound packets which were discarded even though no errors
had been detected. (E.g. buffer overflow).

OID - 1.3.6.1.2.1.2.2.1.19

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal High
ifOutErrors The number of outbound packets that could not be transmitted because of
errors.

OID - 1.3.6.1.2.1.2.2.1.20

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ifInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which
were addressed to a multicastaddress at this sub-layer.

OID - 1.3.6.1.2.1.31.1.1.1.2

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ifInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which
were addressed to a broadcast address at this sub-layer.

OID - 1.3.6.1.2.1.31.1.1.1.3

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
Table 57 IF-MIB II Measurements (Seite 2 von 4)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 127
snmp_perform_measure.fm

Measurement Name Description Details

ifOutMulticastPkts The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a multicast address at this sub-layer,
including those that were discarded or not sent.

OID - 1.3.6.1.2.1.31.1.1.1.4

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ifOutBroadcastPkts The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.

OID - 1.3.6.1.2.1.31.1.1.1.5

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ifHCInOctets 64 bit version of ifInOctets

OID - 1.3.6.1.2.1.31.1.1.1.6

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ifHCInUcastPkts 64 bit version of ifInUcastPkts

OID - 1.3.6.1.2.1.31.1.1.1.7

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ifHCInMulticastPkts 64 bit version of ifInMulticastPkts

OID - 1.3.6.1.2.1.31.1.1.1.8

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ifHCInBroadcastPkts 64 bit version of ifInBroadcastPkts

OID - 1.3.6.1.2.1.31.1.1.1.9

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ifHCOutOctets 64 bit version of ifOutOctets

OID - 1.3.6.1.2.1.31.1.1.1.10

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
Table 57 IF-MIB II Measurements (Seite 3 von 4)

A31003-H8070-T102-1-7618, April, 2012

128 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

ifHCOutUcastPkts 64 bit version of ifOutUcastPkts

OID - 1.3.6.1.2.1.31.1.1.1.11

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ifHCOutMulticastPkts 64 bit version of ifOutMulticastPkts

OID - 1.3.6.1.2.1.31.1.1.1.12

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ifHCOutBroadcastPkts 64 bit version of ifOutBroadcastPkts

OID - 1.3.6.1.2.1.31.1.1.1.13

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
Table 57 IF-MIB II Measurements (Seite 4 von 4)

6.2.2 IP-MIB II
Table 58 describes the IP-MIB II performance statistics and measurement
parameters.

Measurement Name Description Details

icmpStatsInMsgs The total number of ICMP messages that the entity received.

OID - 1.3.6.1.2.1.5.29.1.2

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High and Low
icmpStatsInErrors The number of ICMP messages that the entity received but determined as
having ICMP-specific errors.

OID - 1.3.6.1.2.1.5.29.1.3

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
icmpStatsOutMsgs The total number of ICMP messages that the entity attempted to send.

OID - 1.3.6.1.2.1.5.29.1.4

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High and Low

Table 58 IP-MIB II Measurements (Seite 1 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 129
snmp_perform_measure.fm

Measurement Name Description Details

icmpStatsOutErrors The number of ICMP messages that this entity did not send due to problems
discovered within ICMP, such as a lack of buffers.

OID - 1.3.6.1.2.1.5.29.1.5

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
icmpMsgStatsInPkts The number of input packets for this AF and type.

OID - 1.3.6.1.2.1.5.30.1.2

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High and Low
icmpMsgStatsOutPkts The number of output packets for this AF and type.

OID - 1.3.6.1.2.1.5.30.1.3

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High and Low
ipSystemStatsInReceives The total number of input IP datagrams received, including those received in
error.

OID - 1.3.6.1.2.1.4.31.1.1.3

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsHCInReceives 64 bit equivalent of ipSystemStatsInReceives

OID - 1.3.6.1.2.1.4.31.1.1.4

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsInOctets The total number of octets received in input IP datagrams, including those
received in error.

OID - 1.3.6.1.2.1.4.31.1.1.5

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsHCInOctets 64 bit equivalent of ipSystemStatsInOctets

OID - 1.3.6.1.2.1.4.31.1.1.6

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
Table 58 IP-MIB II Measurements (Seite 2 von 14)

A31003-H8070-T102-1-7618, April, 2012

130 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

ipSystemStatsInHdrErrors The number of input IP datagrams discarded due to errors in their IP headers,
including version number mismatch, other format errors, hop count exceeded,
errors discovered in processing their IP options, etc.

OID - 1.3.6.1.2.1.4.31.1.1.7

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsInNoRoutes The number of input IP datagrams discarded because no route could be found
to transmit them to their destination.

OID - 1.3.6.1.2.1.4.31.1.1.8

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsInAddrErrors The number of input IP datagrams discarded because the IP address in their IP
header's destination field was not a valid address to be received at this entity.

OID - 1.3.6.1.2.1.4.31.1.1.9

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High

ipSystemStatsInUnknownProtos The number of locally-addressed IP datagrams received successfully but

discarded because of an unknown or unsupported protocol.

OID - 1.3.6.1.2.1.4.31.1.1.10

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsInTruncatedPkts The number of input IP datagrams discarded because the datagram frame didn't
carry enough data.

OID - 1.3.6.1.2.1.4.31.1.1.11

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsInForwDatagrams The number of input datagrams for which this entity was not their final IP
destination and for which this entity attempted to find a route to forward them to
that final destination.

OID - 1.3.6.1.2.1.4.31.1.1.12

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High

Table 58 IP-MIB II Measurements (Seite 3 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 131
snmp_perform_measure.fm

Measurement Name Description Details

ipSystemStatsInHCForwDatagrams 64 bit equivalent of ipSystemStatsInForwDatagrams

OID - 1.3.6.1.2.1.4.31.1.1.13

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsReasmReqds The number of IP fragments received that needed to be reassembled at this
interface.

OID - 1.3.6.1.2.1.4.31.1.1.14

Priority: 6-Engineering Info.

ipSystemStatsReasmOKs The number of IP datagrams successfully reassembled.

OID - 1.3.6.1.2.1.4.31.1.1.15

Priority: 6-Engineering Info.

ipSystemStatsReasmFails The number of failures detected by the IP re-assembly algorithm (for whatever
reason: timed out, errors, etc.).

OID - 1.3.6.1.2.1.4.31.1.1.16

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsInDiscards The number of input IP datagrams for which no problems were encountered to
prevent their continued processing, but were discarded (e.g., for lack of buffer
space).

OID - 1.3.6.1.2.1.4.31.1.1.17

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal High
ipSystemStatsInDelivers The total number of datagrams successfully delivered to IP user-protocols
(including ICMP).

OID - 1.3.6.1.2.1.4.31.1.1.18

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsHCInDelivers 64 bit equivalent of ipSystemStatsInDelivers

OID - 1.3.6.1.2.1.4.31.1.1.19

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
Table 58 IP-MIB II Measurements (Seite 4 von 14)

A31003-H8070-T102-1-7618, April, 2012

132 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

ipSystemStatsOutRequests The total number of IP datagrams that local IP user-protocols (including ICMP)
supplied to IP in requests for transmission.

OID - 1.3.6.1.2.1.4.31.1.1.20

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsHCOutRequests 64 bit equivalent of ipSystemStatsOutRequests

OID - 1.3.6.1.2.1.4.31.1.1.21

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsOutNoRoutes The number of locally generated IP datagrams discarded because no route
could be found to transmit them to their destination.

OID - 1.3.6.1.2.1.4.31.1.1.22

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsOutForwDatagrams The number of datagrams for which this entity was not their final IP destination
and for which it was successful in finding a path to their final destination.

OID - 1.3.6.1.2.1.4.31.1.1.23

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsHCOutForwDatagrams 64 bit equivalent of ipSystemStatsOutForwDatagrams

OID - 1.3.6.1.2.1.4.31.1.1.24

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsOutDiscards The number of output IP datagrams for which no problem was encountered to
prevent their transmission to their destination, but were discarded (e.g., for lack
of buffer space).

OID - 1.3.6.1.2.1.4.31.1.1.25

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsOutFragReqds The number of IP datagrams that would require fragmentation in order to be
transmitted.

OID - 1.3.6.1.2.1.4.31.1.1.26

Priority: 6-Engineering Info.

Table 58 IP-MIB II Measurements (Seite 5 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 133
snmp_perform_measure.fm

Measurement Name Description Details

ipSystemStatsOutFragOKs The number of IP datagrams that have been successfully fragmented.

OID - 1.3.6.1.2.1.4.31.1.1.27

Priority: 6-Engineering Info.

ipSystemStatsOutFragFails The number of IP datagrams that have been discarded because they needed to
be fragmented but could not be.

OID - 1.3.6.1.2.1.4.31.1.1.28

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsOutFragCreates The number of output datagram fragments that have been generated as a result
of IP fragmentation.

OID - 1.3.6.1.2.1.4.31.1.1.29

Priority: 6-Engineering Info.

ipSystemStatsOutTransmits The total number of IP datagrams that this entity supplied to the lower layers for
transmission.

OID - 1.3.6.1.2.1.4.31.1.1.30

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsHCOutTransmits 64 bit equivalent of ipSystemStatsOutTransmits

OID - 1.3.6.1.2.1.4.31.1.1.31

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsOutOctets The total number of octets in IP datagrams delivered to the lower layers for
transmission.

OID - 1.3.6.1.2.1.4.31.1.1.32

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsHCOutOctets 64 bit equivalent of ipSystemStatsOutOctets

OID - 1.3.6.1.2.1.4.31.1.1.33

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipSystemStatsInMcastPkts The number of IP multicast datagrams received.

OID - 1.3.6.1.2.1.4.31.1.1.34

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High

Table 58 IP-MIB II Measurements (Seite 6 von 14)

A31003-H8070-T102-1-7618, April, 2012

134 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

ipSystemStatsHCInMcastPkts 64 bit equivalent of ipSystemStatsInMcastPkts

OID - 1.3.6.1.2.1.4.31.1.1.35

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsInMcastOctets The total number of octets received in IP multicast datagrams

OID - 1.3.6.1.2.1.4.31.1.1.36

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsHCInMcastOctets 64 bit equivalent of ipSystemStatsInMcastOctets

OID - 1.3.6.1.2.1.4.31.1.1.37

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsOutMcastPkts The number of IP multicast datagrams transmitted.

OID - 1.3.6.1.2.1.4.31.1.1.38

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsHCOutMcastPkts 64 bit equivalent of ipSystemStatsOutMcastPkts

OID - 1.3.6.1.2.1.4.31.1.1.39

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsOutMcastOctets The total number of octets transmitted in IP multicast datagrams.

OID - 1.3.6.1.2.1.4.31.1.1.40

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsHCOutMcastOctets 64 bit equivalent of ipSystemStatsOutMcastOctets

OID - 1.3.6.1.2.1.4.31.1.1.41

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsInBcastPkts The number of IP broadcast datagrams received.

OID - 1.3.6.1.2.1.4.31.1.1.42

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High

Table 58 IP-MIB II Measurements (Seite 7 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 135
snmp_perform_measure.fm

Measurement Name Description Details

ipSystemStatsHCInBcastPkts 64 bit equivalent of ipSystemStatsInBcastPkts

OID - 1.3.6.1.2.1.4.31.1.1.43

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsOutBcastPkts The number of IP broadcast datagrams transmitted.

OID - 1.3.6.1.2.1.4.31.1.1.44

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipSystemStatsHCOutBcastPkts 64 bit equivalent of ipSystemStatOutBcastPkts

OID - 1.3.6.1.2.1.4.31.1.1.45

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipIfStatsInReceives The total number of input IP datagrams received, including those received in
error.

OID - 1.3.6.1.2.1.4.31.3.1.3

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipIfStatsHCInReceives 64 bit equivalent of ipIfStatsInReceives

OID - 1.3.6.1.2.1.4.31.3.1.4

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipIfStatsInOctets The total number of octets received in input IP datagrams, including those
received in error.

OID - 1.3.6.1.2.1.4.31.3.1.5

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipIfStatsHCInOctets 64 bit equivalent of ipIfStatsInOctets

OID - 1.3.6.1.2.1.4.31.3.1.6

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
Table 58 IP-MIB II Measurements (Seite 8 von 14)

A31003-H8070-T102-1-7618, April, 2012

136 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

ipIfStatsInHdrErrors The number of input IP datagrams discarded due to errors in their IP headers,
including version number mismatch, other format errors, hop count exceeded,
errors discovered in processing their IP options, etc.

OID - 1.3.6.1.2.1.4.31.3.1.7

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipIfStatsInNoRoutes The number of input IP datagrams discarded because no route could be found
to transmit them to their destination.

OID - 1.3.6.1.2.1.4.31.3.1.8

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipIfStatsInAddrErrors The number of input IP datagrams discarded because the IP address in their IP
header's destination field was not a valid address to be received at this entity.

OID - 1.3.6.1.2.1.4.31.3.1.9

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipIfStatsInUnknownProtos The number of locally-addressed IP datagrams received successfully but
discarded because of an unknown or unsupported protocol.

OID - 1.3.6.1.2.1.4.31.3.1.10

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipIfStatsInTruncatedPkts The number of input IP datagrams discarded because the datagram frame didn't
carry enough data.

OID - 1.3.6.1.2.1.4.31.3.1.11

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipIfStatsInForwDatagrams The number of input datagrams for which this entity was not their final IP
destination and for which this entity attempted to find a route to forward them to
that final destination.

OID - 1.3.6.1.2.1.4.31.3.1.12

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
ipIfStatsHCInForwDatagrams 64 bit equivalent of ipIfStatsInForwDatagrams

OID - 1.3.6.1.2.1.4.31.3.1.13

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High

Table 58 IP-MIB II Measurements (Seite 9 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 137
snmp_perform_measure.fm

Measurement Name Description Details

ipIfStatsReasmReqds The number of IP fragments received that needed to be reassembled at this
interface.

OID - 1.3.6.1.2.1.4.31.3.1.14

Priority: 6-Engineering Info.

ipIfStatsReasmOKs The number of IP datagrams successfully reassembled.

OID - 1.3.6.1.2.1.4.31.3.1.15

Priority: 6-Engineering Info.

ipIfStatsReasmFails The number of failures detected by the IP re-assembly algorithm (for whatever
reason: timed out, errors, etc.).

OID - 1.3.6.1.2.1.4.31.3.1.16

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsInDiscards The number of input IP datagrams for which no problems were encountered to
prevent their continued processing, but were discarded (e.g., for lack of buffer
space).

OID - 1.3.6.1.2.1.4.31.3.1.17

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal High
ipIfStatsInDelivers The total number of datagrams successfully delivered to IP user-protocols
(including ICMP).

OID - 1.3.6.1.2.1.4.31.3.1.18

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipIfStatsHCInDelivers 64 bit equivalent of ipIfStatsInDelivers

OID - 1.3.6.1.2.1.4.31.3.1.19

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipIfStatsOutRequests The total number of IP datagrams that local IP user-protocols (including ICMP)
supplied to IP in requests for transmission.

OID - 1.3.6.1.2.1.4.31.3.1.20

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
Table 58 IP-MIB II Measurements (Seite 10 von 14)

A31003-H8070-T102-1-7618, April, 2012

138 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

ipIfStatsHCOutRequests 64 bit equivalent of ipIfStatsOutRequests

OID - 1.3.6.1.2.1.4.31.3.1.21

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipIfStatsOutForwDatagrams The number of datagrams for which this entity was not their final IP destination
and for which it was successful in finding a path to their final destination.

OID - 1.3.6.1.2.1.4.31.3.1.23

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsHCOutForwDatagrams 64 bit equivalent of ipIfStatsOutForwDatagrams

OID - 1.3.6.1.2.1.4.31.3.1.24

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsOutDiscards The number of output IP datagrams for which no problem was encountered to
prevent their transmission to their destination, but were discarded (e.g., for lack
of buffer space).

OID - 1.3.6.1.2.1.4.31.3.1.25

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal High
ipIfStatsOutFragReqds The number of IP datagrams that would require fragmentation in order to be
transmitted.

OID - 1.3.6.1.2.1.4.31.3.1.26

Priority: 6-Engineering Info.

ipIfStatsOutFragOKs The number of IP datagrams that have been successfully fragmented.

OID - 1.3.6.1.2.1.4.31.3.1.27

Priority: 6-Engineering Info.

ipIfStatsOutFragFails The number of IP datagrams that have been discarded because they needed to
be fragmented but could not be.

OID - 1.3.6.1.2.1.4.31.3.1.28

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
Table 58 IP-MIB II Measurements (Seite 11 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 139
snmp_perform_measure.fm

Measurement Name Description Details

ipIfStatsOutFragCreates The number of output datagram fragments that have been generated as a result
of IP fragmentation.

OID - 1.3.6.1.2.1.4.31.3.1.29

Priority: 6-Engineering Info.

ipIfStatsOutTransmits The total number of IP datagrams that this entity supplied to the lower layers for
transmission.

OID - 1.3.6.1.2.1.4.31.3.1.30

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipIfStatsHCOutTransmits 64 bit equivalent of ipIfStatsOutTransmits

OID - 1.3.6.1.2.1.4.31.3.1.31

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipIfStatsOutOctets The total number of octets in IP datagrams delivered to the lower layers for
transmission.

OID - 1.3.6.1.2.1.4.31.3.1.32

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipIfStatsHCOutOctets 64 bit equivalent of ipIfStatsOutOctets

OID - 1.3.6.1.2.1.4.31.3.1.33

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
ipIfStatsInMcastPkts The number of IP multicast datagrams received.

OID - 1.3.6.1.2.1.4.31.3.1.34

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsHCInMcastPkts 64 bit equivalent of ipIfStatsInMcastPkts

OID - 1.3.6.1.2.1.4.31.3.1.35

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsInMcastOctets The total number of octets received in IP multicast datagrams.

OID - 1.3.6.1.2.1.4.31.3.1.36

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High

Table 58 IP-MIB II Measurements (Seite 12 von 14)

A31003-H8070-T102-1-7618, April, 2012

140 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

ipIfStatsHCInMcastOctets 64 bit equivalent of ipIfStatsInMcastOctets

OID - 1.3.6.1.2.1.4.31.3.1.37

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsOutMcastPkts The number of IP multicast datagrams transmitted.

OID - 1.3.6.1.2.1.4.31.3.1.38

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsHCOutMcastPkts 64 bit equivalent of ipIfStatsOutMcastPkts

OID - 1.3.6.1.2.1.4.31.3.1.39

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsOutMcastOctets The total number of octets transmitted in IP multicast datagrams.

OID - 1.3.6.1.2.1.4.31.3.1.40

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsHCOutMcastOctets 64 bit equivalent of ipIfStatsOutMcastOctets

OID - 1.3.6.1.2.1.4.31.3.1.41

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsInBcastPkts The number of IP broadcast datagrams received.

OID - 1.3.6.1.2.1.4.31.3.1.42

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsHCInBcastPkts 64 bit equivalent of ipIfStatsInBcastPkts

OID - 1.3.6.1.2.1.4.31.3.1.43

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
ipIfStatsOutBcastPkts The number of IP broadcast datagrams transmitted.

OID - 1.3.6.1.2.1.4.31.3.1.44

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High

Table 58 IP-MIB II Measurements (Seite 13 von 14)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 141
snmp_perform_measure.fm

Measurement Name Description Details

ipIfStatsHCOutBcastPkts 64 bit equivalent of ipIfStatsOutBcastPkts

OID - 1.3.6.1.2.1.4.31.3.1.45

Priority: 2-Major Configuration Problem

Operator Hint: Monitor for Abnormal High
Table 58 IP-MIB II Measurements (Seite 14 von 14)

6.2.3 TCP - MIB II

Table 59 describes the TCP-MIB II performance statistics and measurement
parameters.

Measurement Name Description Details

tcpActiveOpens The number of times TCP connections have made a direct transition to the
SYN-SENT state from the CLOSED state.

OID - 1.3.6.1.2.1.6.5

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
tcpPassiveOpens The number of times TCP connections have made a direct transition to the
SYN-RCVD state from the LISTEN state.

OID - 1.3.6.1.2.1.6.6

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
tcpAttemptFails The number of times TCP connections made a transition to the CLOSED state
from either the SYN-SENT state or the SYN-RCVD state, plus the number of
times TCP connections made a transition to the LISTEN state from the SYN-
RCVD state.

OID - 1.3.6.1.2.1.6.7

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
tcpEstabResets The number of times TCP connections have made a direct transition to the
CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.

OID - 1.3.6.1.2.1.6.8

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High

Table 59 TCP - MIB II Measurements (Seite 1 von 3)

A31003-H8070-T102-1-7618, April, 2012

142 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

tcpCurrEstab The number of TCP connections for which the current state is either
ESTABLISHED or CLOSE-WAIT.

OID - 1.3.6.1.2.1.6.9

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
tcpInSegs The total number of segments received, including those received in error. This
count includes segments received on currently established connections.

OID - 1.3.6.1.2.1.6.10

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
tcpHCInSegs 64 bit equivalent of tcpInSegs.

OID - 1.3.6.1.2.1.6.17

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
tcpOutSegs The total number of segments sent, including those on current connections but
excluding those containing only retransmitted octets.

OID - 1.3.6.1.2.1.6.11

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
tcpHCOutSegs 64 bit equivalent of tcpOutSegs.

OID - 1.3.6.1.2.1.6.18

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
tcpRetransSegs The total number of segments retransmitted - that is, the number of TCP
segments transmitted containing one or more previously transmitted octets.

OID - 1.3.6.1.2.1.6.12

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
tcpInErrs The total number of segments received in error (e.g., bad TCP checksums).

OID - 1.3.6.1.2.1.6.14

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
Table 59 TCP - MIB II Measurements (Seite 2 von 3)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 143
snmp_perform_measure.fm

Measurement Name Description Details

tcpOutRsts The number of TCP segments sent containing the RST flag.

OID - 1.3.6.1.2.1.6.15

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
Table 59 TCP - MIB II Measurements (Seite 3 von 3)

6.2.4 UDP - MIB II

Table 60 describes the UDP-MIB II performance statistics and measurement
parameters.

Measurement Name Description Details

udpInDatagrams The total number of UDP datagrams delivered to UDP users.

OID - 1.3.6.1.2.1.7.1

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
udpHCInDatagrams 64 bit equivalent of udpInDatagrams

OID - 1.3.6.1.2.1.7.8

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
udpNoPorts The total number of received UDP datagrams for which there was no application
at the destination port.

OID - 1.3.6.1.2.1.7.2

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
udpInErrors The number of received UDP datagrams that could not be delivered for reasons
other than the lack of an application at the destination port.

OID - 1.3.6.1.2.1.7.3

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
udpOutDatagrams The total number of UDP datagrams sent from this entity.

OID - 1.3.6.1.2.1.7.4

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low

Table 60 UDP - MIB II Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

144 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

Measurement Name Description Details

udpHCOutDatagrams 64 bit equivalent of udpOutDatagrams.

OID - 1.3.6.1.2.1.7.9

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
Table 60 UDP - MIB II Measurements (Seite 2 von 2)

6.2.5 SNMP - MIB II

Table 61 describes the SNMP-MIB II performance statistics and measurement
parameters.

Measurement Name Description Details

snmpInPkts The total number of Messages delivered to the SNMP entity from the transport
service.

OID - 1.3.6.1.2.1.11.1

Priority: 1-Critical Service Affecting

Operator Hints: Monitor for Abnormal Low
snmpInBadVersions The total number of SNMP Messages which were delivered to the SNMP
protocol entity and were for an unsupported SNMP version.

OID - 1.3.6.1.2.1.11.3

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
snmpInBadCommunityNames The total number of SNMP Messages delivered to the SNMP protocol entity
which used a SNMP community name not known to said entity.

OID - 1.3.6.1.2.1.11.4

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
snmpInBadCommunityUses The total number of SNMP Messages delivered to the SNMP protocol entity
which represented an SNMP operation which was not allowed by the SNMP
community named in the Message.

OID - 1.3.6.1.2.1.11.5

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High

Table 61 SNMP - MIB II Measurements (Seite 1 von 2)

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 145
snmp_perform_measure.fm

Measurement Name Description Details

snmpInASNParseErrs The total number of ASN.1 or BER errors encountered by the SNMP protocol
entity when decoding received SNMP messages.

OID - 1.3.6.1.2.1.11.6

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
snmpEnableAuthenTraps Indicates whether the SNMP entity is permitted to generate
authenticationFailure traps.

OID - 1.3.6.1.2.1.11.31

Priority: 6-Engineering Info.

snmpSilentDrops The total number of Confirmed Class PDUs delivered to the SNMP entity wich
were silently dropped because the size of the reply exceeded either a local
constraint or the maximum message size associated with the originator of the
request.

OID - 1.3.6.1.2.1.11.31

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
snmpProxyDrops The total number of Confirmed Class PDUs delivered to the SNMP entity which
were silently dropped because the transmission of the message to a proxy
target failed in a manner such that no Response Class PDU could be returned.

OID - 1.3.6.1.2.1.11.32

Priority: 2-Major Configuration Problem

Operator Hints: Monitor for Abnormal High
Table 61 SNMP - MIB II Measurements (Seite 2 von 2)

A31003-H8070-T102-1-7618, April, 2012

146 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

6.2.6 UCD-SNMP-MIB
OpenScape Voice Memory, IO and CPU measurements are available via the
UCD-SNMP-MIB and Host-Resources MIB.

Note: Please note that Siemens Enterprise Communications does not control the
SW supporting these MIBs. Some of the information may not be supported by a
particular HW platform.

6.2.6.1 Example of the data provided by the UCD-SNMP-MIB

Note: There is only a single average counter and not one for each CPU. The
number is in clock ticks so the interpreting software at a surveillance OSS will
have to poll and create an average over time. The formula for a percentage is:
Idle CPU = (idle2 - idle1)*100/((idle2 - idle1)+(user2 - user1)+(nice2 -
nice1)+(system2 - system1))

The memory is as reported by vmstat.

+--systemStats
| +-- ssIndex
| +-- ssErrorName
| +-- ssSwapIn
| +-- ssSwapOut
| +-- ssIOSent
| +-- ssIOReceive
| +-- ssSysInterrupts
| +-- ssSysContext
| +-- ssCpuUser
| +-- ssCpuSystem
| +-- ssCpuIdle
| +-- ssCpuRawUser
| +-- ssCpuRawNice
| +-- ssCpuRawSystem
| +-- ssCpuRawIdle
| +-- ssCpuRawWait
| +-- ssCpuRawKernel
| +-- ssCpuRawInterrupt
| +-- ssIORawSent(

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 147
snmp_perform_measure.fm

| +-- ssIORawReceived
| +-- ssRawInterrupts
| +-- ssRawContexts
| +-- ssCpuRawSoftIRQ
| +-- ssRawSwapIn
| +-- ssRawSwapOut
|
+--memory
+-- memIndex
+-- memErrorName
+-- memTotalSwap
+-- memAvailSwap
+-- memTotalReal
+-- memAvailReal
+-- memTotalSwapTXT
+-- memAvailSwapTXT
+-- memTotalRealTXT
+-- memAvailRealTXT
+-- memTotalFree
+-- memMinimumSwap
+-- memShared
+-- memBuffer
+-- memCached
+-- memSwapError
+-- memSwapErrorMsg

# snmpwalk -v2c -c SENSnmp localhost ucdavis

UCD-SNMP-MIB::memIndex.0 = INTEGER: 0
UCD-SNMP-MIB::memErrorName.0 = STRING: swap
UCD-SNMP-MIB::memTotalSwap.0 = INTEGER: 4000144 kB
UCD-SNMP-MIB::memAvailSwap.0 = INTEGER: 4000144 kB
UCD-SNMP-MIB::memTotalReal.0 = INTEGER: 8151292 kB
UCD-SNMP-MIB::memAvailReal.0 = INTEGER: 3492536 kB
UCD-SNMP-MIB::memTotalFree.0 = INTEGER: 7492680 kB
UCD-SNMP-MIB::memMinimumSwap.0 = INTEGER: 16000 kB
UCD-SNMP-MIB::memShared.0 = INTEGER: 0 kB
UCD-SNMP-MIB::memBuffer.0 = INTEGER: 554308 kB
UCD-SNMP-MIB::memCached.0 = INTEGER: 2891548 kB
UCD-SNMP-MIB::memSwapError.0 = INTEGER: noError(0)

A31003-H8070-T102-1-7618, April, 2012

148 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

UCD-SNMP-MIB::memSwapErrorMsg.0 = STRING:
UCD-SNMP-MIB::laIndex.1 = INTEGER: 1
UCD-SNMP-MIB::laIndex.2 = INTEGER: 2
UCD-SNMP-MIB::laIndex.3 = INTEGER: 3
UCD-SNMP-MIB::laNames.1 = STRING: Load-1
UCD-SNMP-MIB::laNames.2 = STRING: Load-5
UCD-SNMP-MIB::laNames.3 = STRING: Load-15
UCD-SNMP-MIB::laLoad.1 = STRING: 13.01
UCD-SNMP-MIB::laLoad.2 = STRING: 13.05
UCD-SNMP-MIB::laLoad.3 = STRING: 13.00
UCD-SNMP-MIB::laConfig.1 = STRING: 12.00
UCD-SNMP-MIB::laConfig.2 = STRING: 12.00
UCD-SNMP-MIB::laConfig.3 = STRING: 12.00
UCD-SNMP-MIB::laLoadInt.1 = INTEGER: 1301
UCD-SNMP-MIB::laLoadInt.2 = INTEGER: 1305
UCD-SNMP-MIB::laLoadInt.3 = INTEGER: 1300
UCD-SNMP-MIB::laLoadFloat.1 = Opaque: Float: 13.010000
UCD-SNMP-MIB::laLoadFloat.2 = Opaque: Float: 13.050000
UCD-SNMP-MIB::laLoadFloat.3 = Opaque: Float: 13.000000
UCD-SNMP-MIB::laErrorFlag.1 = INTEGER: error(1)
UCD-SNMP-MIB::laErrorFlag.2 = INTEGER: error(1)
UCD-SNMP-MIB::laErrorFlag.3 = INTEGER: error(1)
UCD-SNMP-MIB::laErrMessage.1 = STRING: 1 min Load Average too
high (= 13.01)
UCD-SNMP-MIB::laErrMessage.2 = STRING: 5 min Load Average too
high (= 13.05)
UCD-SNMP-MIB::laErrMessage.3 = STRING: 15 min Load Average too
high (= 13.00)
UCD-SNMP-MIB::ssIndex.0 = INTEGER: 1
UCD-SNMP-MIB::ssErrorName.0 = STRING: systemStats
UCD-SNMP-MIB::ssSwapIn.0 = INTEGER: 0 kB
UCD-SNMP-MIB::ssSwapOut.0 = INTEGER: 0 kB
UCD-SNMP-MIB::ssIOSent.0 = INTEGER: 85 blocks/s
UCD-SNMP-MIB::ssIOReceive.0 = INTEGER: 0 blocks/s
UCD-SNMP-MIB::ssSysInterrupts.0 = INTEGER: 326 interrupts/s
UCD-SNMP-MIB::ssSysContext.0 = INTEGER: 2214 switches/s
UCD-SNMP-MIB::ssCpuUser.0 = INTEGER: 5
UCD-SNMP-MIB::ssCpuSystem.0 = INTEGER: 0
UCD-SNMP-MIB::ssCpuIdle.0 = INTEGER: 93
UCD-SNMP-MIB::ssCpuRawUser.0 = Counter32: 9615391

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 149
snmp_perform_measure.fm

UCD-SNMP-MIB::ssCpuRawNice.0 = Counter32: 16683

UCD-SNMP-MIB::ssCpuRawSystem.0 = Counter32: 2182167
UCD-SNMP-MIB::ssCpuRawIdle.0 = Counter32: 1103073847
UCD-SNMP-MIB::ssCpuRawWait.0 = Counter32: 1230820
UCD-SNMP-MIB::ssCpuRawKernel.0 = Counter32: 0
UCD-SNMP-MIB::ssCpuRawInterrupt.0 = Counter32: 8340
UCD-SNMP-MIB::ssIORawSent.0 = Counter32: 66757546
UCD-SNMP-MIB::ssIORawReceived.0 = Counter32: 3891576
UCD-SNMP-MIB::ssRawInterrupts.0 = Counter32: 245262872
UCD-SNMP-MIB::ssRawContexts.0 = Counter32: 1939711745
UCD-SNMP-MIB::ssCpuRawSoftIRQ.0 = Counter32: 41496
UCD-SNMP-MIB::ssRawSwapIn.0 = Counter32: 0
UCD-SNMP-MIB::ssRawSwapOut.0 = Counter32: 0
UCD-DLMOD-MIB::dlmodNextIndex.0 = INTEGER: 1
UCD-DISKIO-MIB::diskIOIndex.1 = INTEGER: 1
UCD-DISKIO-MIB::diskIOIndex.2 = INTEGER: 2
UCD-DISKIO-MIB::diskIOIndex.3 = INTEGER: 3
UCD-DISKIO-MIB::diskIOIndex.4 = INTEGER: 4
UCD-DISKIO-MIB::diskIOIndex.5 = INTEGER: 5
UCD-DISKIO-MIB::diskIOIndex.6 = INTEGER: 6
UCD-DISKIO-MIB::diskIOIndex.7 = INTEGER: 7
UCD-DISKIO-MIB::diskIOIndex.8 = INTEGER: 8
UCD-DISKIO-MIB::diskIOIndex.9 = INTEGER: 9
UCD-DISKIO-MIB::diskIOIndex.10 = INTEGER: 10
UCD-DISKIO-MIB::diskIOIndex.11 = INTEGER: 11
UCD-DISKIO-MIB::diskIOIndex.12 = INTEGER: 12
UCD-DISKIO-MIB::diskIOIndex.13 = INTEGER: 13
UCD-DISKIO-MIB::diskIOIndex.14 = INTEGER: 14
UCD-DISKIO-MIB::diskIOIndex.15 = INTEGER: 15
UCD-DISKIO-MIB::diskIOIndex.16 = INTEGER: 16
UCD-DISKIO-MIB::diskIOIndex.17 = INTEGER: 17
UCD-DISKIO-MIB::diskIOIndex.18 = INTEGER: 18
UCD-DISKIO-MIB::diskIOIndex.19 = INTEGER: 19
UCD-DISKIO-MIB::diskIOIndex.20 = INTEGER: 20
UCD-DISKIO-MIB::diskIOIndex.21 = INTEGER: 21
UCD-DISKIO-MIB::diskIOIndex.22 = INTEGER: 22
UCD-DISKIO-MIB::diskIOIndex.23 = INTEGER: 23
UCD-DISKIO-MIB::diskIOIndex.24 = INTEGER: 24
UCD-DISKIO-MIB::diskIOIndex.25 = INTEGER: 25

A31003-H8070-T102-1-7618, April, 2012

150 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

UCD-DISKIO-MIB::diskIOIndex.26 = INTEGER: 26
UCD-DISKIO-MIB::diskIOIndex.27 = INTEGER: 27
UCD-DISKIO-MIB::diskIOIndex.28 = INTEGER: 28
UCD-DISKIO-MIB::diskIOIndex.29 = INTEGER: 29
UCD-DISKIO-MIB::diskIOIndex.30 = INTEGER: 30
UCD-DISKIO-MIB::diskIOIndex.31 = INTEGER: 31
UCD-DISKIO-MIB::diskIOIndex.32 = INTEGER: 32
UCD-DISKIO-MIB::diskIOIndex.33 = INTEGER: 33
UCD-DISKIO-MIB::diskIOIndex.34 = INTEGER: 34
UCD-DISKIO-MIB::diskIOIndex.35 = INTEGER: 35
UCD-DISKIO-MIB::diskIOIndex.36 = INTEGER: 36
UCD-DISKIO-MIB::diskIOIndex.37 = INTEGER: 37
UCD-DISKIO-MIB::diskIOIndex.38 = INTEGER: 38
UCD-DISKIO-MIB::diskIOIndex.39 = INTEGER: 39
UCD-DISKIO-MIB::diskIOIndex.40 = INTEGER: 40
UCD-DISKIO-MIB::diskIOIndex.41 = INTEGER: 41
UCD-DISKIO-MIB::diskIOIndex.42 = INTEGER: 42
UCD-DISKIO-MIB::diskIOIndex.43 = INTEGER: 43
UCD-DISKIO-MIB::diskIOIndex.44 = INTEGER: 44
UCD-DISKIO-MIB::diskIOIndex.45 = INTEGER: 45
UCD-DISKIO-MIB::diskIOIndex.46 = INTEGER: 46
UCD-DISKIO-MIB::diskIODevice.1 = STRING: ram0
UCD-DISKIO-MIB::diskIODevice.2 = STRING: ram1
UCD-DISKIO-MIB::diskIODevice.3 = STRING: ram2
UCD-DISKIO-MIB::diskIODevice.4 = STRING: ram3
UCD-DISKIO-MIB::diskIODevice.5 = STRING: ram4
UCD-DISKIO-MIB::diskIODevice.6 = STRING: ram5
UCD-DISKIO-MIB::diskIODevice.7 = STRING: ram6
UCD-DISKIO-MIB::diskIODevice.8 = STRING: ram7
UCD-DISKIO-MIB::diskIODevice.9 = STRING: ram8
UCD-DISKIO-MIB::diskIODevice.10 = STRING: ram9
UCD-DISKIO-MIB::diskIODevice.11 = STRING: ram10
UCD-DISKIO-MIB::diskIODevice.12 = STRING: ram11
UCD-DISKIO-MIB::diskIODevice.13 = STRING: ram12
UCD-DISKIO-MIB::diskIODevice.14 = STRING: ram13
UCD-DISKIO-MIB::diskIODevice.15 = STRING: ram14
UCD-DISKIO-MIB::diskIODevice.16 = STRING: ram15
UCD-DISKIO-MIB::diskIODevice.17 = STRING: sr0
UCD-DISKIO-MIB::diskIODevice.18 = STRING: sda

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 151
snmp_perform_measure.fm

UCD-DISKIO-MIB::diskIODevice.19 = STRING: sda1

UCD-DISKIO-MIB::diskIODevice.20 = STRING: sda2
UCD-DISKIO-MIB::diskIODevice.21 = STRING: sda3
UCD-DISKIO-MIB::diskIODevice.22 = STRING: sda4
UCD-DISKIO-MIB::diskIODevice.23 = STRING: sda5
UCD-DISKIO-MIB::diskIODevice.24 = STRING: sda6
UCD-DISKIO-MIB::diskIODevice.25 = STRING: sda7
UCD-DISKIO-MIB::diskIODevice.26 = STRING: sda8
UCD-DISKIO-MIB::diskIODevice.27 = STRING: sda9
UCD-DISKIO-MIB::diskIODevice.28 = STRING: sda10
UCD-DISKIO-MIB::diskIODevice.29 = STRING: sda11
UCD-DISKIO-MIB::diskIODevice.30 = STRING: sda12
UCD-DISKIO-MIB::diskIODevice.31 = STRING: sda13
UCD-DISKIO-MIB::diskIODevice.32 = STRING: sda14
UCD-DISKIO-MIB::diskIODevice.33 = STRING: sda15
UCD-DISKIO-MIB::diskIODevice.34 = STRING: sdb
UCD-DISKIO-MIB::diskIODevice.35 = STRING: md0
UCD-DISKIO-MIB::diskIODevice.36 = STRING: loop0
UCD-DISKIO-MIB::diskIODevice.37 = STRING: loop1
UCD-DISKIO-MIB::diskIODevice.38 = STRING: loop2
UCD-DISKIO-MIB::diskIODevice.39 = STRING: loop3
UCD-DISKIO-MIB::diskIODevice.40 = STRING: loop4
UCD-DISKIO-MIB::diskIODevice.41 = STRING: loop5
UCD-DISKIO-MIB::diskIODevice.42 = STRING: loop6
UCD-DISKIO-MIB::diskIODevice.43 = STRING: loop7
UCD-DISKIO-MIB::diskIODevice.44 = STRING: md1
UCD-DISKIO-MIB::diskIODevice.45 = STRING: md2
UCD-DISKIO-MIB::diskIODevice.46 = STRING: md3
UCD-DISKIO-MIB::diskIONRead.1 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.2 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.3 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.4 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.5 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.6 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.7 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.8 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.9 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.10 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.11 = Counter32: 0

A31003-H8070-T102-1-7618, April, 2012

152 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

UCD-DISKIO-MIB::diskIONRead.12 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.13 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.14 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.15 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.16 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.17 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.18 = Counter32: 1992004096
UCD-DISKIO-MIB::diskIONRead.19 = Counter32: 206336
UCD-DISKIO-MIB::diskIONRead.20 = Counter32: 910244864
UCD-DISKIO-MIB::diskIONRead.21 = Counter32: 1572864
UCD-DISKIO-MIB::diskIONRead.22 = Counter32: 3072
UCD-DISKIO-MIB::diskIONRead.23 = Counter32: 414607872
UCD-DISKIO-MIB::diskIONRead.24 = Counter32: 1318912
UCD-DISKIO-MIB::diskIONRead.25 = Counter32: 12714496
UCD-DISKIO-MIB::diskIONRead.26 = Counter32: 4743680
UCD-DISKIO-MIB::diskIONRead.27 = Counter32: 159392256
UCD-DISKIO-MIB::diskIONRead.28 = Counter32: 3940864
UCD-DISKIO-MIB::diskIONRead.29 = Counter32: 3342848
UCD-DISKIO-MIB::diskIONRead.30 = Counter32: 283406848
UCD-DISKIO-MIB::diskIONRead.31 = Counter32: 1110528
UCD-DISKIO-MIB::diskIONRead.32 = Counter32: 2757120
UCD-DISKIO-MIB::diskIONRead.33 = Counter32: 192178688
UCD-DISKIO-MIB::diskIONRead.34 = Counter32: 499712
UCD-DISKIO-MIB::diskIONRead.35 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.36 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.37 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.38 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.39 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.40 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.41 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.42 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.43 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.44 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.45 = Counter32: 0
UCD-DISKIO-MIB::diskIONRead.46 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.1 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.2 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.3 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.4 = Counter32: 0

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 153
snmp_perform_measure.fm

UCD-DISKIO-MIB::diskIONWritten.5 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.6 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.7 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.8 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.9 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.10 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.11 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.12 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.13 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.14 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.15 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.16 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.17 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.18 = Counter32: 2247980032
UCD-DISKIO-MIB::diskIONWritten.19 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.20 = Counter32: 4134790144
UCD-DISKIO-MIB::diskIONWritten.21 = Counter32: 131072
UCD-DISKIO-MIB::diskIONWritten.22 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.23 = Counter32: 1793713152
UCD-DISKIO-MIB::diskIONWritten.24 = Counter32: 3458048
UCD-DISKIO-MIB::diskIONWritten.25 = Counter32: 87937024
UCD-DISKIO-MIB::diskIONWritten.26 = Counter32: 798013440
UCD-DISKIO-MIB::diskIONWritten.27 = Counter32: 792976384
UCD-DISKIO-MIB::diskIONWritten.28 = Counter32: 34331136
UCD-DISKIO-MIB::diskIONWritten.29 = Counter32: 133648896
UCD-DISKIO-MIB::diskIONWritten.30 = Counter32: 3508507648
UCD-DISKIO-MIB::diskIONWritten.31 = Counter32: 202240
UCD-DISKIO-MIB::diskIONWritten.32 = Counter32: 305664
UCD-DISKIO-MIB::diskIONWritten.33 = Counter32: 1417307136
UCD-DISKIO-MIB::diskIONWritten.34 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.35 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.36 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.37 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.38 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.39 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.40 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.41 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.42 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.43 = Counter32: 0

A31003-H8070-T102-1-7618, April, 2012

154 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

UCD-DISKIO-MIB::diskIONWritten.44 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.45 = Counter32: 0
UCD-DISKIO-MIB::diskIONWritten.46 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.1 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.2 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.3 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.4 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.5 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.6 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.7 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.8 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.9 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.10 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.11 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.12 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.13 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.14 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.15 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.16 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.17 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.18 = Counter32: 95442
UCD-DISKIO-MIB::diskIOReads.19 = Counter32: 214
UCD-DISKIO-MIB::diskIOReads.20 = Counter32: 63964
UCD-DISKIO-MIB::diskIOReads.21 = Counter32: 1396
UCD-DISKIO-MIB::diskIOReads.22 = Counter32: 3
UCD-DISKIO-MIB::diskIOReads.23 = Counter32: 24159
UCD-DISKIO-MIB::diskIOReads.24 = Counter32: 712
UCD-DISKIO-MIB::diskIOReads.25 = Counter32: 6151
UCD-DISKIO-MIB::diskIOReads.26 = Counter32: 8740
UCD-DISKIO-MIB::diskIOReads.27 = Counter32: 25357
UCD-DISKIO-MIB::diskIOReads.28 = Counter32: 6413
UCD-DISKIO-MIB::diskIOReads.29 = Counter32: 5808
UCD-DISKIO-MIB::diskIOReads.30 = Counter32: 41102
UCD-DISKIO-MIB::diskIOReads.31 = Counter32: 1756
UCD-DISKIO-MIB::diskIOReads.32 = Counter32: 4853
UCD-DISKIO-MIB::diskIOReads.33 = Counter32: 78431
UCD-DISKIO-MIB::diskIOReads.34 = Counter32: 45
UCD-DISKIO-MIB::diskIOReads.35 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.36 = Counter32: 0

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 155
snmp_perform_measure.fm

UCD-DISKIO-MIB::diskIOReads.37 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.38 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.39 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.40 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.41 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.42 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.43 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.44 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.45 = Counter32: 0
UCD-DISKIO-MIB::diskIOReads.46 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.1 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.2 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.3 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.4 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.5 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.6 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.7 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.8 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.9 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.10 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.11 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.12 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.13 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.14 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.15 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.16 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.17 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.18 = Counter32: 2747399
UCD-DISKIO-MIB::diskIOWrites.19 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.20 = Counter32: 3106950
UCD-DISKIO-MIB::diskIOWrites.21 = Counter32: 68
UCD-DISKIO-MIB::diskIOWrites.22 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.23 = Counter32: 439607
UCD-DISKIO-MIB::diskIOWrites.24 = Counter32: 869
UCD-DISKIO-MIB::diskIOWrites.25 = Counter32: 21672
UCD-DISKIO-MIB::diskIOWrites.26 = Counter32: 195202
UCD-DISKIO-MIB::diskIOWrites.27 = Counter32: 1242466
UCD-DISKIO-MIB::diskIOWrites.28 = Counter32: 9723
UCD-DISKIO-MIB::diskIOWrites.29 = Counter32: 32770

A31003-H8070-T102-1-7618, April, 2012

156 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_perform_measure.fm

UCD-DISKIO-MIB::diskIOWrites.30 = Counter32: 857082

UCD-DISKIO-MIB::diskIOWrites.31 = Counter32: 115
UCD-DISKIO-MIB::diskIOWrites.32 = Counter32: 261
UCD-DISKIO-MIB::diskIOWrites.33 = Counter32: 2445171
UCD-DISKIO-MIB::diskIOWrites.34 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.35 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.36 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.37 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.38 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.39 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.40 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.41 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.42 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.43 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.44 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.45 = Counter32: 0
UCD-DISKIO-MIB::diskIOWrites.46 = Counter32: 0
UCD-SNMP-MIB::logMatchMaxEntries.0 = INTEGER: 50
UCD-SNMP-MIB::versionIndex.0 = INTEGER: 1
UCD-SNMP-MIB::versionTag.0 = STRING: 5.4
UCD-SNMP-MIB::versionDate.0 = STRING: $Date: 2006/09/15 00:48:42
$
UCD-SNMP-MIB::versionCDate.0 = STRING: Tue Nov 10 16:05:33 2009
UCD-SNMP-MIB::versionIdent.0 = STRING: $Id: versioninfo.c,v 5.3
2006/09/15 00:48:42 tanders Exp $
UCD-SNMP-MIB::versionConfigureOptions.0 = STRING: '--
host=x86_64-suse-linux-gnu' '--build=x86_64-suse-linux-gnu' '--
target=x86_64-suse-linux' '--program-prefix=' '--prefix=/usr' '-
-exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--
sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/
include' '--libdir=/usr/lib64' '--libexecdir=/u
UCD-SNMP-MIB::versionClearCache.0 = INTEGER: 0
UCD-SNMP-MIB::versionUpdateConfig.0 = INTEGER: 0
UCD-SNMP-MIB::versionRestartAgent.0 = INTEGER: 0
UCD-SNMP-MIB::versionSavePersistentData.0 = INTEGER: 0
UCD-SNMP-MIB::versionDoDebugging.0 = INTEGER: 0
UCD-SNMP-MIB::snmperrIndex.0 = INTEGER: 0
UCD-SNMP-MIB::snmperrNames.0 = STRING: snmp
UCD-SNMP-MIB::snmperrErrorFlag.0 = INTEGER: noError(0)
UCD-SNMP-MIB::snmperrErrMessage.0 = STRING:

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 157
snmp_manage_traps.fm

7 Managing SNMP Trap Destinations

Normally, the SNMP trap destinations are configured during installation; however,
additional trap destinations can be created, modified, displayed and/or deleted
using the other associated SnmpEventFilter commands in the RTP CLI.

This chapter assumes the user knows how to use and access the RTP CLI. For
information on either of these topics, refer to the OpenScape Voice Configuration
Manual: Volume 3, Configuration and Administration Using CLI Application-level
Management book.

7.1 Creating SNMP Trap Destinations

To create a new SNMP trap destination, perform the following steps:

1. From the Main Menu (shown below), at the Selection prompt, enter the
following menu selection: 2 (Fault Management).

Main Menu:

Configuration Management.......................1
Fault Management...............................2
Performance Management.........................3
Security Management............................4
System Management..............................5
Application-level Management...................6

Open Logfile............................93
Show Callback Output....................94
Wait for Callbacks......................95
Change Password.........................96
New Login...............................97
Expert Mode.............................98
Exit....................................99

Selection: 2

2. From the Fault Management (shown below), at the Selection prompt, enter
the following menu selection: 1 (Events).

Fault Management:

Events.........................................1
Alarms.........................................2
Trace..........................................3
Audit..........................................4
Recovery.......................................5

Return..................................99

Selection: 1

A31003-H8070-T102-1-7618, April, 2012

158 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_manage_traps.fm

3. From the Events menu (shown below), at the Selection prompt, enter the
following menu selection: 14 (createSnmpEventFilter).

Events (methods):

registerForEvents..............................1
unregisterForEvents............................2
reRegisterForEvents............................3
recoverEvents..................................4
getEventSets...................................5
getEventBasicDescriptions......................6
getFullEventDescription........................7
modifyEventParameters..........................8
getEventEscalationFilters......................9
addEventEscalationFilter......................10
removeEventEscalationFilter...................11
removeEvents..................................12
getLatestEventSequenceNumber..................13
createSnmpEventFilter.........................14
modifySnmpEventFilter.........................15
removeSnmpEventFilter.........................16
getSnmpEventFilters...........................17
getCriticalEventDescriptions..................18
addCriticalEvent..............................19
removeCriticalEvent...........................20

Display Class Name......................98

Return..................................99

Selection (default: 17): 14

4. The createSnmpEventFilter displays the following message and requests
the input the IP address of the trap destination (x.x.x.x) and press Enter.

executing method createSnmpEventFilter...

ipAddr:

5. The following is displayed; press Enter.

eventSets[0] <end: <Return>>:

6. The following is displayed; enter 1.

severities[0] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>: 1

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 159
snmp_manage_traps.fm

7. The following is displayed; enter 2.

severities[1] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>: 2
8. The following is displayed; enter 3.

severities[2] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>: 3
9. The following is displayed; enter 4.

severities[3] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>: 4

Attention: Event Severity, EVT_SEV_INFORMATION (5), typically should not be

sent to any trap destination.

10. The following is displayed; enter 6.

severities[3] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>: 6
11. The following is displayed; press Enter.

severities[3] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>:

A31003-H8070-T102-1-7618, April, 2012

160 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_manage_traps.fm

12. The following is displayed; enter 2.

snmpVersion <EVT_SNMP_TRAP_V1: 1,
EVT_SNMP_TRAP_V2c: 2,
EVT_SNMP_TRAP_V3: 3>: 2

Press <Return> to continue

7.2 Modifying SNMP Trap Destinations

To modify an existing SNMP trap destination, perform the following steps:

1. From the Main Menu (shown below), at the Selection prompt, enter the
following menu selection: 2 (Fault Management).

Main Menu:

Configuration Management.......................1
Fault Management...............................2
Performance Management.........................3
Security Management............................4
System Management..............................5
Application-level Management...................6

Open Logfile............................93
Show Callback Output....................94
Wait for Callbacks......................95
Change Password.........................96
New Login...............................97
Expert Mode.............................98
Exit....................................99

Selection: 2

2. From the Fault Management (shown below), at the Selection prompt, enter
the following menu selection: 1 (Events).

Fault Management:

Events.........................................1
Alarms.........................................2
Trace..........................................3
Audit..........................................4
Recovery.......................................5

Return..................................99

Selection: 1

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 161
snmp_manage_traps.fm

3. From the Events menu (shown below), at the Selection prompt, enter the
following menu selection: 15 (modifySnmpEventFilter).

Events (methods):

registerForEvents..............................1
unregisterForEvents............................2
reRegisterForEvents............................3
recoverEvents..................................4
getEventSets...................................5
getEventBasicDescriptions......................6
getFullEventDescription........................7
modifyEventParameters..........................8
getEventEscalationFilters......................9
addEventEscalationFilter......................10
removeEventEscalationFilter...................11
removeEvents..................................12
getLatestEventSequenceNumber..................13
createSnmpEventFilter.........................14
modifySnmpEventFilter.........................15
removeSnmpEventFilter.........................16
getSnmpEventFilters...........................17
getCriticalEventDescriptions..................18
addCriticalEvent..............................19
removeCriticalEvent...........................20

Display Class Name......................98

Return..................................99

Selection (default: 17): 15

4. The modifySnmpEventFilter displays the following message and requests
the input the IP address of the trap destination (x.x.x.x) and press Enter.

executing method modifySnmpEventFilter...

ipAddr:

5. The following is displayed; press Enter.

eventSets[0] <end: <Return>>:

6. The following is displayed; enter 1.

severities[0] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>: 1

A31003-H8070-T102-1-7618, April, 2012

162 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_manage_traps.fm

7. The following is displayed; enter 2.

severities[1] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>: 2
8. The following is displayed; enter 3.

severities[2] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>: 3
9. The following is displayed; enter 4.

severities[3] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>: 4

Attention: Event Severity, EVT_SEV_INFORMATION (5), typically should not be

sent to any trap destination.

10. The following is displayed; enter 6.

severities[3] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>: 6
11. The following is displayed; press Enter.

severities[3] <EVT_SEV_CRITICAL: 1,
EVT_SEV_MAJOR: 2,
EVT_SEV_MINOR: 3,
EVT_SEV_WARNING: 4,
EVT_SEV_INFORMATION: 5,
EVT_SEV_CLEAR: 6,
end: <Return>>:

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 163
snmp_manage_traps.fm

12. The following is displayed; enter 2.

snmpVersion <EVT_SNMP_TRAP_V1: 1,
EVT_SNMP_TRAP_V2c: 2,
EVT_SNMP_TRAP_V3: 3>: 2
trapDestPort <(1..32767)> (default: -1):

Press <Return> to continue

7.3 Deleting SNMP Trap Destinations

To remove an SNMP trap destination, perform the following steps:

1. From the Main Menu (shown below), at the Selection prompt, enter the
following menu selection: 2 (Fault Management).

Main Menu:

Configuration Management.......................1
Fault Management...............................2
Performance Management.........................3
Security Management............................4
System Management..............................5
Application-level Management...................6

Open Logfile............................93
Show Callback Output....................94
Wait for Callbacks......................95
Change Password.........................96
New Login...............................97
Expert Mode.............................98
Exit....................................99

Selection: 2

2. From the Fault Management (shown below), at the Selection prompt, enter
the following menu selection: 1 (Events).

Fault Management:

Events.........................................1
Alarms.........................................2
Trace..........................................3
Audit..........................................4
Recovery.......................................5

Return..................................99

Selection: 1

A31003-H8070-T102-1-7618, April, 2012

164 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_manage_traps.fm

3. From the Events menu (shown below), at the Selection prompt, enter the
following menu selection: 16 (removeSnmpEventFilter).

Events (methods):

registerForEvents..............................1
unregisterForEvents............................2
reRegisterForEvents............................3
recoverEvents..................................4
getEventSets...................................5
getEventBasicDescriptions......................6
getFullEventDescription........................7
modifyEventParameters..........................8
getEventEscalationFilters......................9
addEventEscalationFilter......................10
removeEventEscalationFilter...................11
removeEvents..................................12
getLatestEventSequenceNumber..................13
createSnmpEventFilter.........................14
modifySnmpEventFilter.........................15
removeSnmpEventFilter.........................16
getSnmpEventFilters...........................17
getCriticalEventDescriptions..................18
addCriticalEvent..............................19
removeCriticalEvent...........................20

Display Class Name......................98

Return..................................99

Selection (default: 17): 16

4. The removeSnmpEventFilter displays the following message and requests
the input the IP address of the trap destination (x.x.x.x) and press Enter.

executing method removeSnmpEventFilter...

ipAddr: 172.20.1.100

Do you want to execute this action? (default: yes):

Press <Return> to continue

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 165
snmp_manage_traps.fm

7.4 Displaying SNMP Trap Destinations

To display an SNMP trap destination, perform the following steps:

1. From the Main Menu (shown below), at the Selection prompt, enter the
following menu selection: 2 (Fault Management).

Main Menu:

Configuration Management.......................1
Fault Management...............................2
Performance Management.........................3
Security Management............................4
System Management..............................5
Application-level Management...................6

Open Logfile............................93
Show Callback Output....................94
Wait for Callbacks......................95
Change Password.........................96
New Login...............................97
Expert Mode.............................98
Exit....................................99

Selection: 2

2. From the Fault Management (shown below), at the Selection prompt, enter
the following menu selection: 1 (Events).

Fault Management:

Events.........................................1
Alarms.........................................2
Trace..........................................3
Audit..........................................4
Recovery.......................................5

Return..................................99

Selection: 1

3. From the Events menu (shown below), at the Selection prompt, enter the
following menu selection: 17 (getSnmpEventFilter).

Events (methods):

registerForEvents..............................1
unregisterForEvents............................2
reRegisterForEvents............................3
recoverEvents..................................4
getEventSets...................................5
getEventBasicDescriptions......................6
getFullEventDescription........................7
modifyEventParameters..........................8
getEventEscalationFilters......................9
addEventEscalationFilter......................10
removeEventEscalationFilter...................11
removeEvents..................................12

A31003-H8070-T102-1-7618, April, 2012

166 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_manage_traps.fm

getLatestEventSequenceNumber..................13
createSnmpEventFilter.........................14
modifySnmpEventFilter.........................15
removeSnmpEventFilter.........................16
getSnmpEventFilters...........................17
getCriticalEventDescriptions..................18
addCriticalEvent..............................19
removeCriticalEvent...........................20

Display Class Name......................98

Return..................................99

Selection (default: 17): 17

4. The getSnmpEventFilter displays the following:

executing method getSnmpEventFilters...

Ok.

{
(de.siemens.icp.rtp.eventMgmt.SnmpEventFilterInfo@1cffeb4)
ipAddr: 10.22.100.100
eventSets:
severityLevels: 1 2 3 4 6
snmpVersion: 2
lastTransId: 0
trapDestPort: -1
}

{
(de.siemens.icp.rtp.eventMgmt.SnmpEventFilterInfo@5b0668)
ipAddr: 10.22.100.105
eventSets:
severityLevels: 1 2 3 4 6
snmpVersion: 2
lastTransId: 0
trapDestPort: 162
}

{ (de.siemens.icp.rtp.eventMgmt.SnmpEventFilterInfo@1d5a0)
ipAddr: 10.22.140.240
eventSets:
severityLevels: 1 2 3 4 6
snmpVersion: 2
lastTransId: 0
trapDestPort: 162
}

{
(de.siemens.icp.rtp.eventMgmt.SnmpEventFilterInfo@701a27)
ipAddr: 10.22.21.40
eventSets:
severityLevels: 1 2 3 4 6
snmpVersion: 2
lastTransId: 0
trapDestPort: 162
}

Press <Return> to continue

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 167
snmp_manage_traps.fm

7.5 Troubleshooting

Attention: For help with expert mode commands or RTP CLI Application-level
commands, refer to the OpenScape Voice Configuration Manual: Volume 3,
Config and Admin Using CLI Application-level Mgmt book.

7.5.1 Testing Alarms

To test an alarm, refer to the below example:

1. Login as root and type the following commands to test the alarm.
su - srx
../SendAlarm 217 1 fo1 fo2 fo3 "Test Alarm"
A trap is sent to the configured trap destinations. Additionally, the active alarm is
shown in the active alarm table and can be verified by displaying the alarms via
the RTP CLI. In this particular example, there would be a critical alarm with the
short text:
"FaultyObject = fo1/fo2/fo3: Loss of communication".
2. Clear the alarm via the command:
SendAlarm 217 4 fo1 fo2 fo3 "Test Alarm"
3. A clear trap and correlation trap must be sent to the trap destinations.

The alarm should no longer be present in the CLI display.

7.5.2 Checking the node.cfg File

Attention: Checking the node.cfg file is generally used before system installation
to set up the trap destinations.

To determine if there is an entry for the OpenScape Voice File Management

Server, open the node.cfg file to check if an IP address for the SNMP trap
destination is provided. Type the following command:
# vi /etc/hiq8000/node.cfg
An address should display, as shown in the example below:
…snmp_server4: 10.22.140.240

A31003-H8070-T102-1-7618, April, 2012

168 OpenScape Voice V7, SNMP Interface and MIB, Description
 snmp_manage_traps.fm

7.6 Expert Mode Commands

Below are the expert mode commands for the create and modify commands for
SnmpEventFilter as well as examples for all.

ipAddr { [ eventSets ... ] } // {} = ALL

{ [ severityLevels <1=EVT_SEV_CRITICAL | 2=EVT_SEV_MAJOR |
3=EVT_SEV_MINOR | 4=EVT_SEV_WARNING | 5|EVT_SEV_INFORMATION
| 6=EVT_SEV_CLEAR > ... ] } // {} = ALL
snmpVersion < 1=EVT_SNMP_TRAP_V1 | 2=EVT_SNMP_TRAP_V2c |
3=EVT_SNMP_TRAP_V3 >
trapDestPort < 1..32767 | -1=DEFAULT_PORT>
examples:
evtCreateSnmpEventFilter "172.25.99.66" {} { 1 2 3 4 6 } 2 -1
evtGetSnmpEventFilters
evtModifySnmpEventFilter ("172.25.99.66" {} { 3 4 5 } 2
8086)
evtRemoveSnmpEventFilter "172.25.99.66"

A31003-H8070-T102-1-7618, April, 2012

OpenScape Voice V7, SNMP Interface and MIB, Description 169
Index

B Index
backward compatibility 12
hiQAudOSProcNotRunningTrap 45
hiQAudProcessNotRunningMajorTrap 45
hiQAudProcessNotRunningMinorTrap 45
C hiQAudProcessRunningTrap 52
change an SNMP trap destination 161 hiQAudProcHeapAboveCritThld 43
compile order 15 hiQAudProcHeapAboveMajorThld 43
create an SNMP trap destination 158 hiQAudProcHeapAboveMinorThld 44
hiQAudProcHeapSizeChanged1Trap 44
D hiQAudProcHeapSizeChanged2Trap 44
delete an SNMP trap destination 164 hiQAudProcHeapSizeChanged3Trap 44
display an SNMP trap destination 166 hiQAudProcHeapSizeChanged4Trap 44
E hiQAudProcHeapSizeOkTrap 44
hiQAudProcNotRunningCriticalTrap 45
Emmanate 14
hiQAudProcRunningTrap 45
G hiQAudProcStackAboveCritThld 44
get an SNMP trap destination 166 hiQAudProcStackAboveMajorThld 44
hiQAudProcStackAboveMinorThld 44
H hiQAudProcStackSizeChanged1Trap 44
hiPathSIPCounterAboveHighThld 54 hiQAudProcStackSizeChanged2Trap 44
hiPathSIPCounterAboveLowThld 54 hiQAudProcStackSizeChanged3Trap 44
hiPathSIPCounterBelowThld 54 hiQAudProcStackSizeChanged4Trap 44
hiQAccountDeletedTrap 41 hiQAudProcStackSizeOkTrap 45
hiQAccountDisabledTrap 41 hiQAudSemUtilAboveCritThld 46
hiQAccountInactiveTrap 41 hiQAudSemUtilAboveMajorThld 46
hiQAucUscFileSeqNumberErrorTrap 42 hiQAudSemUtilAboveMinorThld 46
hiQAucUscLocalSecStorageOk 42 hiQAudSemUtilBelowThreshTrap 46
hiQAucUscPriStorNotPossibleTrap 41 hiQAudSemUtilChangedTrap 46
hiQAucUscPriStorOKTrap 41 hiQAudSemUtilTrap 46
hiQAucUscSecStorNotPossibleTrap 42 hiQAudShMemUtilBelowThreshTrap 46
hiQAucUscServerTxCdrTrap 41 hiQAudShMemUtilChangedTrap 46
hiQAudAvailDiskSpBelowCritThld 42 hiQAudShMemUtilTooAboveCritThld 46
hiQAudAvailDiskSpBelowMajorThld 42 hiQAudShMemUtilTooAboveMajorThld 46
hiQAudAvailDiskSpBelowMinorThld 42 hiQAudShMemUtilTooAboveMinorThld 46
hiQAudCPUUtilAboveCritThld 45 hiQAudShMemUtilTrap 46
hiQAudCPUUtilAboveMajorThld 45 hiQAudSwapSpaceAboveCritThld 45
hiQAudCPUUtilAboveMinorThld 45 hiQAudSwapSpaceAboveMajorThld 45
hiQAudCPUUtilBelowThreshTrap 45 hiQAudSwapSpaceAboveMinorThld 45
hiQAudCPUUtilChangedTrap 45 hiQAudSwapUtilBelowThreshTrap 46
hiQAudCPUUtilTrap 45 hiQAudSwapUtilChangedTrap 46
hiQAudFileGroupSizeChanged1Trap 43 hiQAudSwapUtilTrap 46
hiQAudFileGroupSizeChanged2Trap 43 hiQCacHighThreshTrap 47
hiQAudFileGroupSizeChanged3Trap 43 hiQCacLowThreshTrap 47
hiQAudFileGroupSizeChanged4Trap 43 hiQCritOperationModeStateChange 49
hiQAudFileGrpAboveCritThld 43 hiqFeatLicDynamicInUse 123
hiQAudFileGrpBelowThreshTrap 43 hiqFeatLicDynamicMaxInUse 124
hiQAudFileSystemAboveMinTrap 43 hiqFeatLicDynamicViolations 124
hiQAudFileSystemBelowMin1Trap 42 hiqFeatLicDynamicViolationsLimit 124
hiQAudFileSystemBelowMin2Trap 42 hiqFeatLicOSMOLicensesAssigned 124
hiQAudFileSystemBelowMin3Trap 42 hiqFeatLicOSMOLicensesInUse 124
hiQAudFileSystemBelowMin4Trap 42 hiqFeatLicOSMOMaxInUsedOver24Hour 125
hiQAuditStartingTrap 42 hiqFeatLicTrunkAverageUsage 123
hiQAudOSProcInstanceNotRunningTrap 45 hiqFeatLicTrunkMaxAverageUsage 123

A31003-H8070-T100-1-7618, April, 2012

170 OpenScape Voice V7, SNMP and MIBs, Interface Manual
 Index

hiQFileGrpAboveMajorThld 43 hiQNmProcessInitCompleteTrap 50, 52

hiQFileGrpAboveMinorThld 43 hiQNmProcessReadyTimeoutTrap 51
hiQGlobalCommsEstablishedTrap 48 hiQNmProcessRestartShortTimeTrap 51
hiQGlobalCommsOperational 49 hiQNmQueueAllocErrorTrap 51
hiQGlobalCriticalLossOfCommsTrap 48 hiQNmQueueCorruptedTrap 51
hiQGlobalDegradedCommsTrap 49 hiQNmResizeGlobalProcTblTrap 51
hiQGlobalFuncAvailTrap 48 hiQNormalOperationMode 49
hiQGlobalFuncUnavailTrap 48 hiQOperationModeStateChange 49
hiQGlobalMajorLossOfCommsTrap 48 hiQOvlCongLevelChangeTrap 53
hiQGlobalMinorLossOfCommsTrap 48 hiQOvlCongLevelToCL0Trap 53
hiQGlobalMsgQueueAboveHighThld 48 hiQOvlCongLevelToCL1Trap 53
hiQGlobalMsgQueueAboveLowThld 49 hiQOvlCongLevelToCL2Trap 53
hiQGlobalMsgQueueAboveMedThld 48 hiQOvlCongLevelToCL3Trap 53
hiQGlobalMsgQueueBelowThld 49 hiQResourceHIghLimitExceeded 49
hiQGlobalProcAbnormalTermTrap 48 hiQResourceMediumLimitExceeded 49
hiQGlobalProcAliasGrpAvail 48 hiQSbcAlarmTrap 53
hiQGlobalProcessAliasGrpUnavail 48 hiQSbcClearTrap 53
hiQGlobalProcessInitActiveTrap 48, 52 hiQSbcSevereAlarmTrap 53
hiQGlobalProcessPartialInitFailTrap 48 hiQSbcTrap 53
hiQGlobalProcSevereInitFailTrap 48 hiQSbcVerySevereAlarmTrap 53
hiQGlobalResourceExceedLimitTrap 48 hiQSecurityFirewallTrigClearTrap 54
hiQGlobalResourceWithinLimitTrap 48 hiQSecurityFirewallTrigTrap 54
hiQGlobalSevereDegradedCommsTrap 49 hiQSevereHardwareTrap 49
hiQGlobalVerySevereDegradedComms 49 hiQSmdiREcvIPAddrPortError 62
hiQHardwareFailureTrap 49 hiQSmdiRecvIPAddrPortOk 62
hiQHardwareInServiceTrap 50 hiQSnmRebootForSubsystemTrap 55
hiQImportantFuncUnavailTrap 48 hiQSnmRtpNodeDownTrap 55
hiQLicenseCountMismatchTrap 50 hiQSnmRtpNodeDownWasUpTrap 55
hiQLicenseCountOkTrap 50 hiQSnmRtpNodeUpTrap 55
hiQLicenseCountSyncTrap 50 hiQSnmRtpNodeUpWasDownTrap 55
hiQLicenseRestoreTrap 50 hiQSnmRtpRestartforSubsystemTrap 54
hiQLicenseSessionCountOkTrap 50 hiQSnmSpecialActScrExecTrap 55
hiQLicenseSessionsTrap 50 hiQSnmSpecialActScrSuccessTrap 55
hiQLicensesExceededTrap 50 hiQSnmStartupFailedTrap 55
hiQMajorOperationModeStateChange 49 hiQSnmStartupSuccessTrap 55
hiQMinorOperationModeStateChange 49 hiQSnmSubsysAdmInterventionTrap 54
hiQNmAliasMembersExceededTrap 51 hiQSnmSubsysAlreadyRunningTrap 54
hiQNmAliasTableLenExceededTrap 51 hiQSnmSubsysRestartSuccessTrap 55
hiQNmDbMaxProcGrpExceededTrap 51 hiQSnmSubsystemStartErrorTrap 54
hiQNmDbTableNotClosedTrap 51 hiQSnmSystemSwitchOffTrap 55
hiQNmDbTableNotOpenedTrap 51 hiQSolidBackupFailedTrap 57
hiQNmDbUnreachable1Trap 50 hiQSolidBothHSBDbPrimaryTrap 57
hiQNmDbUnreachable2Trap 51 hiQSolidCreateNewDbFailedTrap 56
hiQNmDiagnosticErrorTrap 51 hiQSolidDatabaseStartedTrap 56
hiQNmNodeDownMsgErrorTrap 51 hiQSolidDbBrokenCopyTrap 57
hiQNmNodeMgrSignalRestartTrap 51 hiQSolidDbConvertedTrap 56
hiQNmNodeMgrStartingTrap 51, 52 hiQSolidDbDoesNotExistsTrap 56
hiQNmNodeShutdownTrap 51 hiQSolidDbIndexErrorTrap 56
hiQNmProcessCoreCreatedTrap 51 hiQSolidDbIndexTestSuccessTrap 56
hiQNmProcessExecvErrorTrap 51 hiQSolidDbOpenFailureTrap 56
hiQNmProcessExitedwithCodeTrap 51, 52 hiQSolidDbOpeningProblemTrap 57
hiQNmProcessHealthChkTimeoutTrap 51 hiQSolidDbServerCorruptTrap 57

A31003-H8070-T100-1-7618, April, 2012

OpenScape Voice V7, SNMP and MIBs, Interface Manual 171
Index

hiQSolidDbTstConnectFailureTrap 56 hiQTcaL4IndicationTrap 59
hiQSolidDbTstOpenFailureTrap 56 hiQTcaL4MibTrap 59
hiQSolidFatalErrSrvNotStartTrap 56 hiQTcaL4ProcessingTrap 59
hiQSolidFatalErrSrvShutdownTrap 56 hiQTcaL4SecurityTrap 59
hiQSolidFlowEngineIntErrorTrap 56 hiQTcaL4ServiceTrap 59
hiQSolidHSBSwitchPrimErrTrap 57 hiQTestCallGeneratorNotOkTrap 60
hiQSolidHSBSwitchSecErrTrap 57 hiQTestCallGeneratorOkTrap 60
hiQSolidLocalDbServerCorruptTrap 57 hiQTestCallGeneratorProvErrTrap 60
hiQSolidNewConnsAllowedTrap 56 hiQTestCallGenNotOkNodeRestart 60
hiQSolidNewDbNotCreatedTrap 56 hiQTestCallGenNotOkProcRestart 60
hiQSolidNoNewConnsAllowedTrap 56 hiQTestCallGenOverloadDetTrap 60
hiQSolidOldDbVersionTrap 56 hiQTicCopyToTicketPoolFailed 57
hiQSolidServerStartFailedTrap 56 hiQTicDiskFullTicketPoolFailed 57
hiQSolidShutdownTrap 56 hiQTicPoolDiskDevNotAccessible 57
hiQSolidStartedHSBPrimaryTrap 57 hiQUCEServicesRegisteringTrap 60
hiQSolidStartedHSBSecondaryTrap 57 hiQUCEServicesRegistrationFailedTrap 60
hiQSolidTableConvertedTrap 57 hiQVeryImportantFuncUnavailTrap 48
hiQSolidTooManyClientsTrap 56 hiQVerySevereHardwareFailureTrap 49
hiQSubMgmtRemoveResourceError 55
hiQSubMgmtRemoveResourceSuccess 55 I
hiQTcaClearedTrap 60 icmpMsgStatsInPkts 130
hiQTcaL1CommunicationTrap 58 icmpMsgStatsOutPkts 130
hiQTcaL1DatabaseTrap 59 icmpStatsInErrors 129
hiQTcaL1EnvironmentTrap 58 icmpStatsInMsgs 129
hiQTcaL1EquipmentTrap 58 icmpStatsOutErrors 130
hiQTcaL1IndicationTrap 59 icmpStatsOutMsgs 129
hiQTcaL1MibTrap 59 ifHCInBroadcastPkts 128
hiQTcaL1ProcessingTrap 58 ifHCInMulticastPkts 128
hiQTcaL1SecurityTrap 59 ifHCInOctets 128
hiQTcaL1ServiceTrap 58 ifHCInUcastPkts 128
hiQTcaL2CommunicationTrap 58 ifHCOutBroadcastPkts 129
hiQTcaL2DatabaseTrap 59 ifHCOutMulticastPkts 129
hiQTcaL2EnvironmentTrap 58 ifHCOutOctets 128
hiQTcaL2EquipmentTrap 58 ifHCOutUcastPkts 129
hiQTcaL2IndicationTrap 59 ifInBroadcastPkts 127
hiQTcaL2MibTrap 59 ifInDiscards 126
hiQTcaL2ProcessingTrap 58 ifInErrors 126
hiQTcaL2SecurityTrap 59 ifInMulticastPkts 127
hiQTcaL2ServiceTrap 58 ifInOctets 126
hiQTcaL3CommunicationTrap 58 ifInUcastPkts 126
hiQTcaL3DatabaseTrap 59 ifInUnknownProtos 126
hiQTcaL3EnvironmentTrap 58 ifOperStatus 126
hiQTcaL3EquipmentTrap 58 ifOutBroadcastPkts 128
hiQTcaL3IndicationTrap 59 ifOutDiscards 127
hiQTcaL3MibTrap 59 ifOutErrors 127
hiQTcaL3ProcessingCriticalTrap 58 ifOutMulticastPkts 128
hiQTcaL3SecurityTrap 59 ifOutOctets 127
hiQTcaL3ServiceTrap 58 ifOutUcastPkts 127
hiQTcaL4CommunicationTrap 59 ipIfStatsHCInBcastPkts 141
hiQTcaL4DatabaseTrap 59 ipIfStatsHCInDelivers 138
hiQTcaL4EnvironmentTrap 59 ipIfStatsHCInForwDatagrams 137
hiQTcaL4EquipmentTrap 59 ipIfStatsHCInMcastOctets 141

A31003-H8070-T100-1-7618, April, 2012

172 OpenScape Voice V7, SNMP and MIBs, Interface Manual
 Index

ipIfStatsHCInMcastPkts 140 ipSystemStatsInDelivers 132

ipIfStatsHCInOctets 136 ipSystemStatsInDiscards 132
ipIfStatsHCInReceives 136 ipSystemStatsInForwDatagrams 131
ipIfStatsHCOutBcastPkts 142 ipSystemStatsInHCForwDatagrams 132
ipIfStatsHCOutForwDatagrams 139 ipSystemStatsInHdrErrors 131
ipIfStatsHCOutMcastOctets 141 ipSystemStatsInMcastOctets 135
ipIfStatsHCOutMcastPkts 141 ipSystemStatsInMcastPkts 134
ipIfStatsHCOutOctets 140 ipSystemStatsInNoRoutes 131
ipIfStatsHCOutRequests 139 ipSystemStatsInOctets 130
ipIfStatsHCOutTransmits 140 ipSystemStatsInReceives 130
ipIfStatsInAddrErrors 137 ipSystemStatsInTruncatedPkts 131
ipIfStatsInBcastPkts 141 ipSystemStatsInUnknownProtos 131
ipIfStatsInDelivers 138 ipSystemStatsOutBcastPkts 136
ipIfStatsInDiscards 138 ipSystemStatsOutDiscards 133
ipIfStatsInForwDatagrams 137 ipSystemStatsOutForwDatagrams 133
ipIfStatsInHdrErrors 137 ipSystemStatsOutFragCreates 134
ipIfStatsInMcastOctets 140 ipSystemStatsOutFragFails 134
ipIfStatsInMcastPkts 140 ipSystemStatsOutFragOKs 134
ipIfStatsInNoRoutes 137 ipSystemStatsOutFragReqds 133
ipIfStatsInOctets 136 ipSystemStatsOutMcastOctets 135
ipIfStatsInReceives 136 ipSystemStatsOutMcastPkts 135
ipIfStatsInTruncatedPkts 137 ipSystemStatsOutNoRoutes 133
ipIfStatsInUnknownProtos 137 ipSystemStatsOutOctets 134
ipIfStatsOutBcastPkts 141 ipSystemStatsOutRequests 133
ipIfStatsOutDiscards 139 ipSystemStatsOutTransmits 134
ipIfStatsOutForwDatagrams 139 ipSystemStatsReasmFails 132
ipIfStatsOutFragFails 139 ipSystemStatsReasmOKs 132
ipIfStatsOutFragOKs 139 ipSystemStatsReasmReqds 132
ipIfStatsOutFragReqds 139
ipIfStatsOutMcastOctets 141 M
ipIfStatsOutMcastPkts 141 management information base 40
ipIfStatsOutOctets 140 MG-Soft 14
ipIfStatsOutRequests 138 MIB 40
ipIfStatsOutTransmits 140 mib directory 12
ipIfStatsReasmFails 138 modify an SNMP trap destination 161
ipIfStatsReasmOKs 138
N
ipIfStatsReasmReqds 138
Net-SNMP 14
ipSystemStatsHCInBcastPkts 136
new SNMP trap destination 158
ipSystemStatsHCInDelivers 132
ipSystemStatsHCInMcastOctets 135 O
ipSystemStatsHCInMcastPkts 135 OID 40
ipSystemStatsHCInOctets 130
ipSystemStatsHCInReceives 130 R
ipSystemStatsHCOutBcastPkts 136 remove an SNMP trap destination 164
ipSystemStatsHCOutForwDatagrams 133 rtpArmAlarmAction 26
ipSystemStatsHCOutMcastOctets 135 rtpArmAlarmId 26
ipSystemStatsHCOutMcastPkts 135 rtpArmAlarmObjectAction 25
ipSystemStatsHCOutOctets 134 rtpArmAlarmObjectStatus 25
ipSystemStatsHCOutRequests 133 rtpArmAlarmObjectType 25
ipSystemStatsHCOutTransmits 134 rtpArmAlarmTime 26
ipSystemStatsInAddrErrors 131 rtpArmAlarmType 26
ipSystemStatsInBcastPkts 135 rtpArmCiAmountOfCorrIDs 27

A31003-H8070-T100-1-7618, April, 2012

OpenScape Voice V7, SNMP and MIBs, Interface Manual 173
Index

rtpArmCiAmountOfParts 27 delete 164

rtpArmCiCorrIDs 27 display 166
rtpArmCiLastTransId 27 get 166
rtpArmCiMultipartNum 27 modify 161
rtpArmCorrIdTrap 27 remove 164
rtpClusterName 19 SNMP Trap OID Example 40
rtpEvtAlarmType 19 snmpEnableAuthenTraps 146
rtpEvtCurrId 18, 27 snmpInASNParseErrs 146
rtpEvtDescriptorAlarmType 21 snmpInBadCommunityNames 145
rtpEvtDescriptorNum 21 snmpInBadCommunityUses 145
rtpEvtDescriptorSet 21 snmpInBadVersions 145
rtpEvtDescriptorSeverity 21 snmpInPkts 145
rtpEvtEndkey 18 snmpProxyDrops 146
rtpEvtEventTime 18 snmpSilentDrops 146
rtpEvtFaultyObject 18
rtpEvtFetAlarmType 23 T
rtpEvtFetCurrId 22 tcpActiveOpens 142
rtpEvtFetEndkey 22 tcpAttemptFails 142
rtpEvtFetEventTime 22 tcpCurrEstab 143
rtpEvtFetFaultyObject 22 tcpEstabResets 142
rtpEvtFetFormatText 22 tcpHCInSegs 143
rtpEvtFetIpAddress 22 tcpHCOutSegs 143
rtpEvtFetNum 22 tcpInErrs 143
rtpEvtFetParameters 23 tcpInSegs 143
rtpEvtFetReportingObject 22 tcpOutRsts 144
rtpEvtFetSet 22 tcpOutSegs 143
rtpEvtFetSeverity 22 tcpPassiveOpens 142
rtpEvtFetShortText 23 tcpRetransSegs 143
rtpEvtFilterEventSets 24
U
rtpEvtFilterIpAddress 24
UA Client 63
rtpEvtFilterLastCurrId 24
UA Server 63
rtpEvtFilterLastTransId 19, 24
udpHCInDatagrams 144
rtpEvtFilterRowStatus 24
udpHCOutDatagrams 145
rtpEvtFilterSeverityLevels 24
udpInDatagrams 144
rtpEvtFilterSnmpVersion 24
udpInErrors 144
rtpEvtFormatText 18
udpNoPorts 144
rtpEvtLastEventSequenceNumber 19
udpOutDatagrams 144
rtpEvtNum 18, 40
User Agent Client 63
rtpEvtParameters 19
User Agent Server 63
rtpEvtReportingObject 18
usSrxMgcp500ErrorCounter 82
rtpEvtSequenceNumberIndex 18
usSrxMgcp501ErrorCounter 82
rtpEvtSet 18, 40
usSrxMgcp502ErrorCounter 82
rtpEvtSeverity 18
usSrxMgcp503ErrorCounter 82
rtpEvtShortText 19
usSrxMgcp504ErrorCounter 82
S usSrxMgcp505ErrorCounter 83
service registration faults 60 usSrxMgcp506ErrorCounter 83
SIP Proxy 63 usSrxMgcp507ErrorCounter 83
SNMP operations 16 usSrxMgcp508ErrorCounter 83
SNMP trap destination usSrxMgcp509ErrorCounter 84
change 161 usSrxMgcp510ErrorCounter 84
create 158 usSrxMgcp511ErrorCounter 84

A31003-H8070-T100-1-7618, April, 2012

174 OpenScape Voice V7, SNMP and MIBs, Interface Manual
 Index

usSrxMgcp512ErrorCounter 84 usSrxServiceACRActConfirmAnnounceUnavailCounte
usSrxMgcp513ErrorCounter 85 r 102
usSrxMgcp514ErrorCounter 85 usSrxServiceACRCallToDenialAnnounceCounter 101
usSrxMgcp515ErrorCounter 85 usSrxServiceACRDeactBySubscriberCounter 101
usSrxMgcp516ErrorCounter 85 usSrxServiceACRDeactConfirmAnnounceUnavailCou
usSrxMgcp517ErrorCounter 85 nter 102
usSrxMgcp518ErrorCounter 86 usSrxServiceACRDenialAnnounceUnavailCounter 10
usSrxMgcp519ErrorCounter 86 2
usSrxMgcp520ErrorCounter 86 usSrxServiceACRNotActDueToResourceUnavailCoun
usSrxMgcp521ErrorCounter 86 ter 101
usSrxMgcp522ErrorCounter 87 usSrxServiceACRNotDeactDueToResourceUnavailCo
usSrxMgcp523ErrorCounter 87 unter 101
usSrxMgcp524ErrorCounter 87 usSrxServiceCFActToAllowedNumberCounter 94
usSrxMgcp525ErrorCounter 87 usSrxServiceCFActToNonAllowedNumberCounter 94
usSrxMgcp526ErrorCounter 88 usSrxServiceCFCFBLOccuredCounter 95
usSrxMgcp527ErrorCounter 88 usSrxServiceCFCFDAOccuredCounter 95
usSrxMgcp528ErrorCounter 88 usSrxServiceCFCFVOccuredCounter 95
usSrxMgcp529ErrorCounter 88 usSrxServiceCFFirstAttemptSuccessCounter 95
usSrxMgcp530ErrorCounter 88 usSrxServiceCFSecondAttemptSuccessCounter 95
usSrxMgcp531ErrorCounter 89 usSrxServiceCFVoiceMailCounter 97
usSrxMgcp532ErrorCounter 89 usSrxServiceCIDAnonymousDNToCalledCPECounter
usSrxMgcp533ErrorCounter 89 98
usSrxMgcp534ErrorCounter 89 usSrxServiceCIDAnonymousNameToCalledCPECoun
usSrxMgcp535ErrorCounter 89 ter 99
usSrxMgcp536ErrorCounter 90 usSrxServiceCIDCallingNameDeliveryBlockingActCou
usSrxMgcp537ErrorCounter 90 nter 100
usSrxMgcp538ErrorCounter 90 usSrxServiceCIDCallingNameToCalledCPECounter 9
usSrxMgcp539ErrorCounter 90 9
usSrxMgcp540ErrorCounter 90 usSrxServiceCIDCIDSDeliveryActCounter 100
usSrxMgcp541ErrorCounter 91 usSrxServiceCIDCIDSSuppressionActCounter 100
usSrxMgcpAuditConnAckReceivedCounter 81 usSrxServiceCIDCNDActivateBySubscriberCounter 9
usSrxMgcpAuditConnSentCounter 81 8
usSrxMgcpAuditEndPointAckReceivedCounter 81 usSrxServiceCIDCNDBlockingActivateCounter 99
usSrxMgcpAuditEndPointSentCounter 80 usSrxServiceCIDCNDBlockingActMadeDNPrivateCou
usSrxMgcpCreateConnAckReceivedCounter 78 nter 100
usSrxMgcpCreateConnSentCounter 78 usSrxServiceCIDCNDBlockingActMadeDNPublicCoun
usSrxMgcpDeleteConnAckReceivedCounter 79 ter 100
usSrxMgcpDeleteConnAckSentCounter 79 usSrxServiceCIDCNDDeactivateBySubscriberCounter
usSrxMgcpDeleteConnReceivedCounter 79 98
usSrxMgcpDeleteConnSentCounter 79 usSrxServiceCIDDNToCalledCPECounter 98
usSrxMgcpEndPointConfigAckReceivedCounter 81 usSrxServiceCIDTCAPNameQueryCounter 99
usSrxMgcpEndPointConfigSentCounter 81 usSrxServiceCIDTCAPNameQueryTimeoutCounter 9
usSrxMgcpModifyConnAckReceivedCounter 78 9
usSrxMgcpModifyConnSentCounter 78 usSrxServiceCIDUnavailDNToCalledCPECounter 98
usSrxMgcpMTATransientErrorCounter 81 usSrxServiceCIDUnavailNameToCalledCPECounter 9
usSrxMgcpNotifyAckSentCounter 80 9
usSrxMgcpNotifyReceivedCounter 80 usSrxServiceCSTAMonitoredAll 119, 121
usSrxMgcpNotifyRequestAckReceivedCounter 80 usSrxServiceCSTAMonitoredOther 119, 121
usSrxMgcpNotifyRequestSentCounter 80 usSrxServiceCSTAMonitoredSiemens 119, 121
usSrxMgcpRestartInProgressAckSentCounter 80 usSrxServiceCSTAMonitoredTelefonica 120, 122
usSrxMgcpRestartInProgressReceivedCounter 79 usSrxServiceDeniedSLECounter 105
usSrxServiceACRActBySubscriberCounter 101 usSrxServiceDNDSucActivCntr 118

A31003-H8070-T100-1-7618, April, 2012

OpenScape Voice V7, SNMP and MIBs, Interface Manual 175
Index

usSrxServiceDNDSucDeActivCntr 118 usSrxServiceSCOneDigitCounter 103

usSrxServiceDNDUnSucActivCntr 118 usSrxServiceSCRAccDeniedResUnaCounter 109
usSrxServiceDNDUnSucDeActivCntr 119 usSrxServiceSCRAllCallsScreenedCounter 108
usSrxServiceEACRActBySubscriberCounter 103 usSrxServiceSCRAttemptCounter 108
usSrxServiceEACRActConfirmAnnounceUnavailCoun usSrxServiceSCRCallToDenialAnncCounter 108
ter 102 usSrxServiceSCRCusDeniedResUnaCounter 108
usSrxServiceEACRDeactBySubscriberCounter 103 usSrxServiceSCRDeniedAnncUnaCounter 109
usSrxServiceEACRDeactConfirmAnnounceUnavailCo usSrxServiceSCTwoDigitCounter 104
unter 103 usSrxServiceTWCAttemptedCounter 112
usSrxServiceEACRNotActDueToResUnavailCounter usSrxServiceTWCFormedCounter 112
102 usSrxServiceVMMWIIndNoDelOpeSnd 117
usSrxServiceEACRNotDeactDueToResUnavailCount usSrxServiceVMMWIIndNoDelRemSnd 118
er 102 usSrxServiceVMMWIIndNotDelOper 116
usSrxServiceICDIncommingAttemptedCounter 112 usSrxServiceVMMWIIndNotDelRem 116
usSrxServiceICDIncommingCompletedCounter 113 usSrxServiceVMMWIInvRecNumOper 115
usSrxServiceICDOutgoingAttemptedCounter 113 usSrxServiceVMMWIInvRecNumRem 115
usSrxServiceICDOutgoingCompletedCounter 113 usSrxServiceVMMWIInvUsrNumberRem 115
usSrxServiceInvokingSLEAttemptsCounter 105 usSrxServiceVMMWIInvUsrNumOper 115
usSrxServiceInvokingSLESuccessfulCounter 105 usSrxServiceVMMWIMaxNumInstRch 116
usSrxServiceMCTStatAbort 110 usSrxServiceVMMWIMaxNumUsrRch 116
usSrxServiceMCTStatAccessesCounter 109 usSrxServiceVMMWIOperCounter 113
usSrxServiceMCTStatActivCounter 109 usSrxServiceVMMWIQueryFailureCounter 114
usSrxServiceMCTStatAfterCallCounter 111 usSrxServiceVMMWIQueryReceivedSuccessCounter
usSrxServiceMCTStatConfirmsCounter 110 114
usSrxServiceMCTStatDuringCallCounter 111 usSrxServiceVMMWIQueryReceivedUnsuccessCount
usSrxServiceMCTStatInvalDnCounter 110 er 114
usSrxServiceMCTStatNoAuth 110 usSrxServiceVMMWIQuerySentSuccessCounter 114
usSrxServiceMCTStatOnAlertingCounter 111 usSrxServiceVMMWIQuerySentUnsuccessCounter 11
usSrxServiceMCTStatOnAnswerCounter 111 4
usSrxServiceMCTStatOnNoReplyCounter 111 usSrxServiceVMMWIRecUsrNoSubOperSnd 117
usSrxServiceMCTStatOpFailCounter 110 usSrxServiceVMMWIRecUsrNoSubRemSnd 117
usSrxServiceMCTStatRecsSentCounter 110 usSrxServiceVMMWIRecUsrNotSubOper 116
usSrxServiceRCFCallsForwardedCounter 96 usSrxServiceVMMWIRecUsrNotSubRem 116
usSrxServiceRCFCallsOfferedCounter 96 usSrxServiceVMMWIRemCounter 114
usSrxServiceRCFCallsOverflowCounter 96 usSrxServiceVMMWIResUnavOper 115
usSrxServiceSCAAccessCodeAttemptedCounter 106 usSrxServiceVMMWIResUnavRem 115
usSrxServiceSCAAttpDeniedResUnavailCounter 107 usSrxServiceVMMWISSIIntOper 117
usSrxServiceSCACusDeniedResUnavailCounter 107 usSrxServiceVMMWISSIIntRem 117
usSrxServiceSCAPinFailedCounter 107 usSrxSip200OKForPrackRcvByServ 73
usSrxServiceSCAPinValidatedCounter 106 usSrxSip200OKForPrackSentByCli 74
usSrxServiceSCATrtDeniedResUnavailCounter 107 usSrxSip200OKForUpdateRcvByServ 74
usSrxServiceSCAUnacceptedCallsCounter 106 usSrxSip200OKForUpdateSentByCli 74
usSrxServiceSCAValidationCounter 106 usSrxSipAckFor3xxSentByClient 75
usSrxServiceSCCCSCSuccessCounter 104 usSrxSipPerf100TryingMsgsRcvdByClient 64
usSrxServiceSCFActvRemoteDNCounter 97 usSrxSipPerf100TryingMsgsSentByServer 72
usSrxServiceSCFCallsFwdedCounter 97 usSrxSipPerf180RingingMsgsRcvdByClient 64
usSrxServiceSCFFailedCounter 96 usSrxSipPerf180RingingMsgsSentByServer 72
usSrxServiceSCFFeatActivatedCounter 96 usSrxSipPerf183MsgRcvByClient 69
usSrxServiceSCFOccurredCounter 96 usSrxSipPerf183MsgSentByServer 70
usSrxServiceSCFResUnavilCounter 97 usSrxSipPerf1xxMsgRcvByClient 69
usSrxServiceSCFScrnEditCounter 97 usSrxSipPerf1xxMsgSentByServer 70
usSrxServiceSCFServAccCdDialedCounter 95 usSrxSipPerf200OKForByeMsgsRcvdByClient 74

A31003-H8070-T100-1-7618, April, 2012

176 OpenScape Voice V7, SNMP and MIBs, Interface Manual
 Index

usSrxSipPerf200OKforByeMsgsSentByServer 74 usSrxSipPerfUASSnt200OKInfo 69
usSrxSipPerf200OKforCancelMsgsRecvdByClient 68 usSrxSipPerfUASSnt200OKNotify 67
usSrxSipPerf200OKforCancelMsgsSentByServer 75 usSrxSipPerfUASSnt200OKSubs 68
usSrxSipPerf200OKForInviteMsgsRcvdByClient 65 usSrxSipPerfUASSnt202Accepted 65
usSrxSipPerf200OKforInviteMsgsSentByServer 73 usSrxSipPerfUASSnt4xx6xxNotify 67
usSrxSipPerf200OKforRegisterMsgsSentByServer 69 usSrxSipPerfUASSnt4xx6xxRefer 66
usSrxSipPerf2xxMsgRcvByClient 69 usSrxSipPerfUASSnt4xx6xxSubs 68
usSrxSipPerf2xxMsgSentByServer 70 usSrxSipPrackMsgRcvByClient 72
usSrxSipPerf301MsgsRcvdByClient 65 usSrxSipPrackMsgSentByServer 73
usSrxSipPerf302MsgsRcvdByClient 65 usSrxSipUpdateMsgRcvByClient 72
usSrxSipPerf3xxMsgRcvByClient 69 usSrxSipUpdateMsgSentByServer 73
usSrxSipPerf3xxMsgSentByServer 71 usSrxUceAbortForAuthFailCounter 93
usSrxSipPerf487MsgsRcvdByClient 68 usSrxUceAbortForCodecUnavailableCounter 93
usSrxSipPerf487MsgsSentByServer 75 usSrxUceAbortForGatewayResourceUnavailableCoun
usSrxSipPerf4xxMsgRcvByClient 70 ter 93
usSrxSipPerf4xxMsgSentByServer 71 usSrxUceAbortForMiscErrorCounter 93
usSrxSipPerf5xxMsgRcvByClient 70 usSrxUceAbortForNoRouteAvailableCounter 92
usSrxSipPerf5xxMsgSentByServer 71 usSrxUceAbortForNoTrunkAvailableCounter 92
usSrxSipPerf6xxMsgRcvByClient 70 usSrxUceAbortForUnavailableResourcesCounter 92
usSrxSipPerf6xxMsgSentByServer 71 usSrxUceBackwardReleaseCounter 92
usSrxSipPerfAckforCancelMsgsRecdByServer 76 usSrxUceCallsReachAddrCompleteCounter 92
usSrxSipPerfAckForCancelMsgsSentByClient 68 usSrxUceCallsReachAnswerCounter 92
usSrxSipPerfAckForErrorMsgsRecdByServer 74 usSrxUceForwardReleaseCounter 91
usSrxSipPerfAckForErrorMsgsSentByClient 66 usSrxUceIncomingHalfCallsCounter 91
usSrxSipPerfAckforInviteMsgsRecdByServer 72 usSrxUceOutgoingHalfCallsCounter 91
usSrxSipPerfAckForInviteMsgsSentByClient 66 usSrxUceSipToMgcpCounter 93
usSrxSipPerfByeMsgsRecdByServer 67 usSrxUceSipToSipCounter 94
usSrxSipPerfByeMsgsSentByClient 67 usSrxUceTermToTreatmentCounter 93
usSrxSipPerfCancelMsgsRecdByServer 75 usSrxUceTotalReleaseCounter 92
usSrxSipPerfCancelMsgsSentByClient 67
usSrxSipPerfErrorMsgsRcvdByClient 66 Z
usSrxSipPerfErrorMsgsSentByServer 73 Zenoss 14
usSrxSipPerfInviteMsgsRecdByServer 73
usSrxSipPerfInviteMsgsSentByClient 64
usSrxSipPerfNoSupportRcvByClient 72
usSrxSipPerfRegisterMsgsReceivedByServer 71
usSrxSipPerfUACRcv200OKInfo 64
usSrxSipPerfUACRcv200OKNotify 75
usSrxSipPerfUACRcv200OKSubs 76
usSrxSipPerfUACRcv202Accepted 76
usSrxSipPerfUACRcv300Multiple 65
usSrxSipPerfUACRcv4xx6xxNotify 76
usSrxSipPerfUACRcv4xx6xxRefer 77
usSrxSipPerfUACRcv4xx6xxSubs 64
usSrxSipPerfUACSntInfo 64
usSrxSipPerfUACSntNotify 75
usSrxSipPerfUACSntRefer 76
usSrxSipPerfUACSntSubscribe 76
usSrxSipPerfUASRcvInfo 68
usSrxSipPerfUASRcvNotify 66
usSrxSipPerfUASRcvRefer 65
usSrxSipPerfUASRcvSubscribe 67

A31003-H8070-T100-1-7618, April, 2012

OpenScape Voice V7, SNMP and MIBs, Interface Manual 177