Computer Network
Computer Network
a) Personal Area Network (PAN) – It is a computer network organized around a person. It is used for
communication between devices such as phones, printers and laptops that are in a close proximity.
b) Local Area Network (LAN) – It is a computer network that is limited to a local area such as a laboratory, a
school or office building. Cables are used for the connections in a LAN.
c) Campus Area Network (CAN) – It is a computer network that connects multiple local area networks in a
limited geographical area. It is used for connection of various buildings in an educational or office campus.
d) Metropolitan Area Network (MAN) – It is a computer network that usually covers a larger area than a LAN. It
is a network that connects two offices in a city and a neighborhood area.
e) Wide Area Network (WAN) – It is a computer network that spans a wide geographical area. A WAN may be
spread across cities, countries and continents. It is formed by connecting LANs and MANs.
7) Explain Topology.
Ans – It refers to the layout pattern in which various computers are connected to one another to form a
network. The computer on a network are also referred as nodes.
a) Bus Topology – In Bus Topology, all computers are connected to a single cable called the backbone cable.
The transmission of data from any computer travels through the length of the backbone cable in both
directions and can be received by all other computers on the networks.
b) Ring Topology – In Ring Topology, each computer is connected to two other computers so as to form a
closed ring-like structure. In this, data is transmitted in one direction only.
c) Star Topology – In Star Topology, all the computers are connected to a central node, which is a networking
device like a hub or a switch. The data can be exchanged between any two computers passes through the
central node.
d) Mesh Topology – In Mesh Topology, every computer is connected to every other computer on the network,
creating a complex web of connections. This allows data to travel through multiple paths, making the
network highly reliable and strong.
Coaxial cable – It is an electrical cable with a conductor at its centre. The inner conductor is surrounded
by a tubular insulating layer, which is surrounded by a conducting layer called shield which is finally
covered with a thin insulating layer on the outside.
Optical Fibre Cable – It consists of a central glass core surrounded by several alyers of protective
material. It transmits data in the form of light rather than electronic signals, thus eliminating the
problem of electrical interference.
Radio Transmission –
12) Explain some of the technologies that uses Radio waves.
Ans – They are:
Bluetooth Technology
Wi-Fi technology
WiMAX