Scribd
Upload
6 views6 pages

Tut 11

The document is a tutorial focused on various concepts in electromagnetism and circuit theory, including magnetic fields, inductance, induced voltage, R-L transients, and Thevenin equivalents. It contains a series of problems and calculations related to these topics, requiring the determination of flux density, inductance, induced voltage, and steady-state conditions. The tutorial is structured in sections, each addressing specific calculations and expressions for electrical circuits.

Uploaded by

matlalaboetie28
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views6 pages

Tut 11

The document is a tutorial focused on various concepts in electromagnetism and circuit theory, including magnetic fields, inductance, induced voltage, R-L transients, and Thevenin equivalents. It contains a series of problems and calculations related to these topics, requiring the determination of flux density, inductance, induced voltage, and steady-state conditions. The tutorial is structured in sections, each addressing specific calculations and expressions for electrical circuits.

Uploaded by

matlalaboetie28
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

TUTORIAL 11

1. MAGNETIC FIELD

For the electromagnet below:

1.1. Find the flux density in Wb/m2


1.2. What is the flux density in teslas?
1.3. What is the applied magnetomotive force?

2. INDUCTANCE

For the inductor below, find the inductance L in henries

3. INDUCED VOLTAGE

3.1. If the flux linking a coil of 50 turns changes at a rate of 120 mW/s, what is the induced voltage
across the coil?
3.2. How many turns does a coil have if 42 mV are induced across the coil by a change in flux of
3mW/s?
3.3. Find the induced voltage across a 50mH inductor if the current through the coil changes at a rate
of 0.1 mA/μs
4. R-L TRANSIENTS: THE STORAGE PHASE

For the circuit below

4.1. Determine τ.
4.2. Write the mathematical expression for the current 𝑖𝐿 after the switch is closed at 𝑡 = 0𝑠.
4.3. Write the mathematical expression for 𝑣𝐿 and 𝑣𝑅 after the switch is closed at 𝑡 = 0𝑠.
4.4. Determine 𝑖𝐿 and 𝑣𝐿 at 𝑡 = 1τ, 𝑡 = 3τ, and 𝑡 = 5τ

5. INITIAL CONDITIONS

For the circuit below: Write the mathematical expressions for the current 𝑖𝐿 and the voltage 𝑣𝐿
following the closing of the switch. Note the magnitude and the direction of the initial current.
6. R-L TRANSIENTS: THE RELEASE PHASE

For the network below:

6.1. Determine the mathematical expressions for the current 𝑖𝐿 and the voltage 𝑣𝐿 when the switch is
closed.
6.2. Repeat part (6.1) if the switch is opened after a period of five time constants has passed

𝑳
7. THÉVENIN EQUIVALENT: 𝝉 =
𝑹𝒕𝒉

7.1. For the figure below:

a. Determine the mathematical expressions for 𝑖𝐿 and 𝑣𝐿 following the closing of the switch.
b. Determine 𝑖𝐿 and 𝑣𝐿 at 𝑡 = 100𝑛𝑠.
7.2. For the network below, the switch is closed at 𝑡 = 0𝑠.

a. Determine 𝑣𝐿 at 𝑡 = 25𝑚𝑠.
b. Find 𝑣𝐿 at 𝑡 = 1𝑚𝑠.
c. Calculate at 𝑡 = 1𝜏.
d. Find the time required for the current 𝑖𝐿 to reach 100 Ma

8. INSTANTANEOUS VALUES

𝑡
Given: 𝑖𝐿 = 100𝑚𝐴 (1 − 𝑒 −20𝑚𝑠 )
8.1. Determine 𝑖𝐿 at 𝑡 = 1𝑚𝑠.
8.2. Determine 𝑖𝐿 at 𝑡 = 1𝑚𝑠 .
8.3. Find the time t when 𝑖𝐿 will equal 50 mA.
8.4. Find the time t when 𝑖𝐿 will equal 99 mA.

9. AVERAGE INDUCED VOLTAGE: 𝒗𝑳𝒂𝒗

Find the waveform for the voltage induced across a 5 mH coil if the current through the coil is as
shown in the figure below.
10. INDUCTORS IN SERIES AND IN PARALLEL

10.1. Find the total inductance of the circuit below:

10.2. Find the total inductance of the circuit below:


11. STEADY-STATE CONDITIONS

11.1. Find the steady-state currents 𝐼1 and 𝐼2 for the network below:

11.2. Find the steady-state currents and voltages for the network below:

You might also like